| _struct{}_ | A structure of data, packing different objects together. Data is "compacted" -- there are no padding bytes between fields. Equivalent to a packed C-style `struct`. The order in which they're defined matches the order of the data in the response packet. |
| _type[n]_ | An array of `type`, with array extent of `N` -- e.g. `u8[2]` signifies two consecutive octets. |
| _u16_ | An unsigned 16-bit integral, commonly seen as `uint16_t` from _stdint.h_. |
| _u32_ | An unsigned 32-bit integral, commonly seen as `uint32_t` from _stdint.h_. |
| _u64_ | An unsigned 64-bit integral, commonly seen as `uint64_t` from _stdint.h_. |
| _u8_ | An unsigned 8-bit integral (octet, or byte), commonly seen as `uint8_t` from _stdint.h_. |
## Definitions
This list defines the terms used across the entire set of XAP protocol documentation.
| Name | Definition |
| -- | -- |
| _Capability_ | A way to determine if certain functionality is enabled in the firmware. Any _subsystem_ that provides build-time restriction of functionality must provide a _route_ for a _capabilities query_. |
| _Handler_ | A piece of code that is executed when a specific _route_ is received. |
| _Payload_ | Any received data appended to the _route_, which gets delivered to the _handler_ when received. |
| _Response_ | The data sent back to the host during execution of a _handler_. |
| _Route_ | A sequence of _IDs_ describing the route to invoke a _handler_. |
| _Secure Route_ | A _route_ which has potentially destructive consequences, necessitating prior approval by the user before executing. |
| _Subsystem_ | A high-level area of functionality within XAP. |
| _Unlock sequence_ | A physical sequence initiated by the user to enable execution of _secure routes_. |
Each request needs to include a _token_ -- this `u16` value prefixes each outbound request from the host application and its corresponding response, allowing response messages to be correlated with their request, even if multiple host applications are communicating with the firmware simultaneously. Host applications should randomly generate a token ID for **every** outbound request, unless using a reserved token defined below.
This token is followed by a `u8` signifying the length of data in the request.
Two token values are reserved: `0x0000` and `0xFFFF`:
*`0x0000`: A message sent by a host application may use this token if no response is to be sent -- a "fire and forget" message.
*`0xFFFF`: Signifies a "broadcast" message sent by the firmware without prompting from the host application. Broadcast messages are defined later in this document.
Any request will generate at least one corresponding response, with the exception of messages using reserved tokens. Maximum total message length is 128 bytes due to RAM constraints.
Response messages will always be prefixed by the originating request _token_, directly followed by that request's _response flags_, then the response payload length:
| Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
* Bit 7 (`UNLOCKED`): When this bit is set, an _unlock sequence_ has completed, and _secure routes_ may be invoked.
* Bit 6 (`UNLOCK_IN_PROGRESS`): When this bit is set, an _unlock sequence_ is in progress.
* Bit 1 (`SECURE_FAILURE`): When this bit is set, the requested _route_ was marked _secure_ but an _unlock sequence_ has not completed.
* Bit 0 (`SUCCESS`): When this bit is set, the request was successfully handled. If not set, all payload data should be disregarded, and the request retried if appropriate (with a new token).
| Version Query | `0x00 0x00` | |<br>__Response:__ `u32`| XAP protocol version query.<br><br>* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`<br> * e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.|
| Capabilities Query | `0x00 0x01` | |<br>__Response:__ `u32`| XAP subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
| Enabled subsystem query | `0x00 0x02` | |<br>__Response:__ `u32`| XAP protocol subsystem query. Each bit should be considered as a "usable" subsystem. For example, checking `(value & (1 << XAP_ROUTE_QMK) != 0)` means the QMK subsystem is enabled and available for querying.|
| Secure Status | `0x00 0x03` | |<br>__Response:__ `u8`| Query secure route status<br><br>* 0 means secure routes are disabled<br>* 1 means unlock sequence initiated but incomplete<br>* 2 means secure routes are allowed<br>* any other value should be interpreted as disabled|
| Version Query | `0x01 0x00` | |<br>__Response:__ `u32`| QMK protocol version query.<br><br>* Returns the BCD-encoded version in the format of XX.YY.ZZZZ => `0xXXYYZZZZ`<br> * e.g. 3.2.115 will match `0x03020115`, or bytes {0x15,0x01,0x02,0x03}.|
| Capabilities Query | `0x01 0x01` | |<br>__Response:__ `u32`| QMK subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
| Board identifiers | `0x01 0x02` | |<br>__Response:__<br> * Vendor ID: `u16`<br> * Product ID: `u16`<br> * Product Version: `u16`<br> * QMK Unique Identifier: `u32`| Retrieves the set of identifying information for the board.|
| Board Manufacturer | `0x01 0x03` | |<br>__Response:__ `string`| Retrieves the name of the manufacturer|
| Product Name | `0x01 0x04` | |<br>__Response:__ `string`| Retrieves the product name|
| info.json length | `0x01 0x05` | |<br>__Response:__ `u32`| Retrieves the length of info.json|
| info.json | `0x01 0x06` | |<br>__Request:__ `u16`<br>__Response:__ `u8[32]`| Retrieves a chunk of info.json|
| Jump to bootloader | `0x01 0x07` | __Secure__ |<br>__Response:__ `u8`| Jump to bootloader<br><br>May not be present – if QMK capabilities query returns “true”, then jump to bootloader is supported<br><br>* 0 means secure routes are disabled, and should be considered as a failure<br>* 1 means successful, board will jump to bootloader|
| info.json | `0x01 0x08` | |<br>__Response:__ `u32[4]`| Retrieves a unique identifier for the board.|
| Capabilities Query | `0x04 0x00` | |<br>__Response:__ `u32`| Dynamic Keymap subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
| Get Layer Count | `0x04 0x01` | |<br>__Response:__ `u8`| Query maximum number of layers that can be addressed within the keymap.|
| Get Keycode | `0x04 0x02` | |<br>__Request:__<br> * Layer: `u8`<br> * Row: `u8`<br> * Column: `u8`<br>__Response:__ `u16`| Query the Keycode at the requested location.|
| Set Keycode | `0x04 0x03` | __Secure__ |<br>__Request:__<br> * Layer: `u8`<br> * Row: `u8`<br> * Column: `u8`<br> * Keycode: `u16`| Modify the Keycode at the requested location.|
| Capabilities Query | `0x05 0x00` | |<br>__Response:__ `u32`| Dynamic Encoders subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
| Get Keycode | `0x05 0x02` | |<br>__Request:__<br> * Layer: `u8`<br> * Encoder: `u8`<br> * Clockwise: `u8`<br>__Response:__ `u16`| Query the Keycode at the requested location.|
| Set Keycode | `0x05 0x03` | __Secure__ |<br>__Request:__<br> * Layer: `u8`<br> * Encoder: `u8`<br> * Clockwise: `u8`<br> * Keycode: `u16`| Modify the Keycode at the requested location.|
| Capabilities Query | `0x06 0x00` | |<br>__Response:__ `u32`| Lighting subsystem capabilities query. Each bit should be considered as a "usable" route within this subsystem.|
Broadcast messages may be sent by the firmware to the host, without a corresponding inbound request. Each broadcast message uses the token `0xFFFF`, and does not expect a response from the host. Tokens are followed by an _ID_ signifying the type of broadcast, with corresponding _payload_.
Replicates and replaces the same functionality as if using the standard QMK `CONSOLE_ENABLE = yes` in `rules.mk`. Normal prints within the firmware will manifest as log messages broadcast to the host. `hid_listen` will not be functional with XAP enabled.
Log message payloads include a `u8` signifying the length of the text, followed by the `u8[Length]` containing the text itself.
