qmk_firmware/keyboards/mechlovin/adelais/rgb_led/rev2/config.h

#pragma once

#define PRODUCT_ID   0xAEC2
#define PRODUCT      Adelais En Ciel Rev2

#define MATRIX_ROW_PINS { B1, A0, C13, A1, A2}
#define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A7 }

#define RGB_DI_PIN A15
#define RGBLED_NUM      23
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8

//rgb matrix setting
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110110
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 32
#define DRIVER_2_LED_TOTAL 36
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set

#define RGB_MATRIX_DISABLE_KEYCODES

#define ENCODERS_PAD_A { A4 }
#define ENCODERS_PAD_B { A3 }
#define ENCODER_RESOLUTION 4

#define TAP_CODE_DELAY 10


#define LED_NUM_LOCK_PIN C15
#define LED_CAPS_LOCK_PIN B2
#define LED_SCROLL_LOCK_PIN B9