qmk_firmware/keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c

532 lines
23 KiB
C
Raw Normal View History

#include QMK_KEYBOARD_H
#include "keymap_japanese.h"
#include <stdio.h>
#include <string.h>
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
// * If you want to recognize that you pressed the Adjust key with the Lower / Raise key you can enable this comment out. However, the binary size may be over. *
// #define ADJUST_MACRO_ENABLE
// * If you want to use the Kana key you can enable this comment out. However, the binary size may be over. *
// #define KANA_ENABLE
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_BASE = 0,
_BAS_E,
_LOWER,
_LOW_E,
_RAISE,
_RAI_E,
_ADJUST,
};
enum custom_keycodes {
RGBRST = SAFE_RANGE,
#ifdef KANA_ENABLE
EISU,
KANA,
#endif
};
// Layer Mode aliases
#define DL_BAS DF(_BASE)
#define DL_BASE DF(_BAS_E)
#define ML_LOW MO(_LOWER)
#define ML_LOWE MO(_LOW_E)
#define ML_RAI MO(_RAISE)
#define ML_RAIE MO(_RAI_E)
#define ML_ADJ MO(_ADJUST)
[Keyboard] Cleanup helix rules options (#6952) * add temporary test shell-spript * Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization No change in build result. * Helix config.h use '#pragma once' No change in build result. * Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once' No change in build result. * Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h No change in build result. * remove keyboards/helix/{rev2|pico}/serial_config.h No change in build result. * 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h. No change in build result. * The contents of helix/rules.mk were distributed to subdirectories. This is a preparation to create a new subdirectory for helix code using split_common. No change in build result. remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk. follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk. ---- SRC += i2c.c SRC += serial.c SRC += ssd1306.c CUSTOM_MATRIX = yes --- * helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/ No change in build result. * Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/pico/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk * Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK. No change in build result. * add keyboards/helix/rev2/local_features.mk * add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk * remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk * remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk * remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk * add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk * Added helix keyboard build NEW method. No change in build result. ## Helix build $ make helix:default ## no oled, no backlight, no underglow $ make helix/rev2/back:default ## no oled, with backlight, no underglow $ make helix/rev2/under:default ## no oled, no backlight, with underglow $ make helix/rev2/oled:default ## with oled, no backlight, not underglow $ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow $ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow $ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow $ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow ## Helix pico build $ make helix/pico:default ## no oled, no backlight, no underglow $ make helix/pico/back:default ## no oled, with backlight, no underglow $ make helix/pico/under:default ## no oled, no backlight, with underglow $ make helix/pico/oled:default ## with oled, no backlight, not underglow * add temporary test shell-spript * test end remove test script. Revert "add temporary test shell-spript" This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657. * test end remove test script. Revert "add temporary test shell-spript" This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed. * Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'. No change in build result. * update keyboards/helix/{rev2,pico}/keymaps/default/readme.md * rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk * update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md * rm keyboards/helix/pico/oled/rules.mk * update helix's readmes. All the ':avrdude' was replaced with ':flash'. * remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk No change in build result.
2019-10-16 18:01:49 +00:00
#if MATRIX_ROWS == 10 // HELIX_ROWS == 5
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty JIS Normal
* ,-----------------------------------------. ,-----------------------------------------.
* | Esc | 1! | 2" | 3# | 4$ | 5% | | 6& | 7' | 8( | 9) | 0 | -= |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | KANJI| Q | W | E | R | T | | Y | U | I | O | P | @` |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | A | S | D | F | G | | H | J | K | L | ;+ | :* |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | N | B | N | M | ,< | .> | Up |Enter |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | Ctrl | GUI | Alt |Adjust|Lower |Space |Bksp |Space |Space |Raise | APP | Left | Down |Right |
* `-------------------------------------------------------------------------------------------------'
*/
[_BASE] = LAYOUT(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
JP_ZKHK, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT,
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT,
KC_LCTL, KC_LALT, KC_LGUI, ML_ADJ, ML_LOW, KC_SPC, KC_BSPC, KC_SPC, KC_SPC, ML_RAI, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT
),
/* Qwerty JIS Exchange L and R
* ,-----------------------------------------. ,-----------------------------------------.
* | 6& | 7' | 8( | 9) | 0 | -= | | Esc | 1! | 2" | 3# | 4$ | 5% |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Y | U | I | O | P | @` | | Tab | Q | W | E | R | T |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | H | J | K | L | ;+ | :* | | | A | S | D | F | G |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | N | M | ,< | .> | /? | Up |Enter |KANJI | Shift| Z | X | C | V | B |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* |Space |Raise | }] | APP | Left | Down |Right |Adjust| Ctrl | GUI | Alt | [{ |Lower | Bksp |
* `-------------------------------------------------------------------------------------------------'
*/
[_BAS_E] = LAYOUT(
KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5,
KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,
KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G,
KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ENT, JP_ZKHK, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,
KC_SPC, ML_RAIE, JP_RBRC, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT, ML_ADJ, KC_LCTL, KC_LALT, KC_LGUI, JP_LBRC, ML_LOWE, KC_BSPC
),
/* Lower JIS Normal
* ,-----------------------------------------. ,-----------------------------------------.
* | | | | | | | | | | | -= | ^~ | \| |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | | @` | [{ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | ;+ | :* | ]} |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | ,< | .> | /? | \_ |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | Del | | | | | | | |
* `-------------------------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT(
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, JP_CIRC, JP_YEN,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, JP_AT, JP_LBRC,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SCLN, JP_COLN, JP_RBRC,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS,
_______, _______, _______, _______, XXXXXXX, XXXXXXX, KC_DEL, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
),
/* Lower JIS Exchange L and R
* ,-----------------------------------------. ,-----------------------------------------.
* | | | | -= | ^~ | \| | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | @` | [{ | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | ;+ | :* | ]} | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | ,< | .> | /? | \_ |PageUp| | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | Home |PageDn| End | | | | | | | Del |
* `-------------------------------------------------------------------------------------------------'
*/
[_LOW_E] = LAYOUT(
_______, XXXXXXX, XXXXXXX, KC_MINS, JP_CIRC, JP_YEN, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, XXXXXXX, XXXXXXX, XXXXXXX, JP_AT, JP_LBRC, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, XXXXXXX, XXXXXXX, KC_SCLN, JP_COLN, JP_RBRC, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_PGUP, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, _______, XXXXXXX, _______, KC_HOME, KC_PGDN, KC_END, _______, _______, _______, _______, XXXXXXX, _______, KC_DEL
),
/* Raise JIS Normal
* ,-----------------------------------------. ,-----------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | |MsWhL |MsWhU | Home |PageUp| F12 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | |MsWhR |MsWhD | End |PageDn| |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | |MsBtn1|MsBtn2| MsUp | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | |MsLeft|MsDown|MsRght|
* `-------------------------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT(
_______, KC_F1 , KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_L, KC_WH_U, KC_HOME, KC_PGUP, KC_F12,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_R, KC_WH_D, KC_END, KC_PGDN, XXXXXXX,
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, KC_MS_U, XXXXXXX,
_______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R
),
/* Raise JIS Exchange L and R
* ,-----------------------------------------. ,-----------------------------------------.
* | F6 | F7 | F8 | F9 | F10 | F11 | | | F1 | F2 | F3 | F4 | F5 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | |MsWhL |MsWhU | F12 | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | |MsWhR |MsWhD | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | |MsBtn1|MsBtn2| MsUp | | | | | | | | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | |MsLeft|MsDown|MsRght| | | | | | | |
* `-------------------------------------------------------------------------------------------------'
*/
[_RAI_E] = LAYOUT(
KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, KC_F1 , KC_F2, KC_F3, KC_F4, KC_F5,
XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_L, KC_WH_U, KC_F12, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_R, KC_WH_D, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, KC_MS_U, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
_______, _______, XXXXXXX, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX
),
/* Adjust (Lower + Raise) Common map for Normal and Exchange
* ,-----------------------------------------. ,-----------------------------------------.
* | | Reset|RGBRST| | | | | | Reset|RGBRST| | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | |ModNrm|ModExc| Mac | Win | | | |ModNrm|ModExc| Mac | Win | |
* |------+------+------+------+------+------| |------+------+------+------+------|------+
* | |RGB ON| HUE+ | SAT+ | VAL+ | | | |RGB ON| HUE+ | SAT+ | VAL+ | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------|------+
* | | MODE | HUE- | SAT- | VAL- | | | | | MODE | HUE- | SAT- | VAL- | |
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | |
* `-------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
XXXXXXX, QK_BOOT, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, QK_BOOT, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, DL_BAS, DL_BASE, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, DL_BAS, DL_BASE, AG_NORM, AG_SWAP, XXXXXXX,
XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,
XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};
#else
#error "undefined keymaps"
#endif
#if defined(SSD1306OLED) || defined(OLED_ENABLE)
char keylog[24] = {};
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ',
' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '};
static inline void set_keylog(uint16_t keycode, keyrecord_t *record)
{
char name = ' ';
uint8_t leds = host_keyboard_leds();
if (keycode < 60)
{
name = code_to_name[keycode];
}
// update keylog
snprintf(keylog, sizeof(keylog), "\n%dx%d %2x %c %c %c %c",
record->event.key.row,
record->event.key.col,
keycode,
name,
(leds & (1<<USB_LED_NUM_LOCK)) ? 'N' : ' ',
(leds & (1<<USB_LED_CAPS_LOCK)) ? 'C' : ' ',
(leds & (1<<USB_LED_SCROLL_LOCK)) ? 'S' : ' '
);
}
#endif
#ifdef RGBLIGHT_ENABLE
#define RGBLIGHT(mode) rgblight_mode(mode)
#else
#define RGBLIGHT(mode)
#endif
// define variables for reactive RGB
int RGB_current_mode;
#ifdef ADJUST_MACRO_ENABLE
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
RGBLIGHT(RGB_current_mode);
layer_on(layer3);
} else {
layer_off(layer3);
}
}
#define ADJUST_MACRO(layer1, layer2, layer3) update_tri_layer_RGB(layer1, layer2, layer3)
#else
#define ADJUST_MACRO(layer1, layer2, layer3)
#endif
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#if defined(SSD1306OLED) || defined(OLED_ENABLE)
if (record->event.pressed) {
set_keylog(keycode, record);
}
#endif
switch (keycode) {
#ifdef RGBLIGHT_ENABLE
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_get_mode();
}
break;
#endif
#ifdef KANA_ENABLE
case EISU:
if (record->event.pressed) {
if (keymap_config.swap_lalt_lgui==false) {
register_code(KC_LNG2);
} else {
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LNG2);
}
break;
case KANA:
if (record->event.pressed) {
if(keymap_config.swap_lalt_lgui==false){
register_code(KC_LNG1);
}else{
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LNG1);
}
break;
#endif
#ifdef RGBLIGHT_ENABLE
case RGBRST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_get_mode();
}
break;
#endif
default:
return true;
}
return false;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_get_mode();
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
static inline void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
//assign the right code to your layers for OLED display
#define L_BASE _BASE
#define L_LOWER (1<<_LOWER)
#define L_RAISE (1<<_RAISE)
#define L_ADJUST (1<<_ADJUST)
#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
#define L_LOW_E (1<<_LOW_E)
#define L_RAI_E (1<<_RAI_E)
#define L_ADJUST_TRIE (L_ADJUST|L_RAI_E|L_LOW_E)
const char helix_logo[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
0};
static inline void render_logo(struct CharacterMatrix *matrix) {
matrix_write(matrix, helix_logo);
}
const char mac_win_logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
static inline void render_status(struct CharacterMatrix *matrix) {
char buf[20];
// Render to mode icon
if(keymap_config.swap_lalt_lgui==false){
matrix_write(matrix, mac_win_logo[0][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, mac_win_logo[0][1]);
} else {
matrix_write(matrix, mac_win_logo[1][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, mac_win_logo[1][1]);
}
#ifdef RGBLIGHT_ENABLE
snprintf(buf, sizeof(buf), " LED mode:%d", (short)RGB_current_mode);
matrix_write(matrix, buf);
#endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
matrix_write_P(matrix, PSTR("\nLayer: "));
switch (layer_state) {
case L_BASE:
matrix_write_P(matrix, default_layer_state == (1UL<<_BAS_E) ? PSTR("BaseEx") : PSTR("Base"));
break;
case L_RAISE:
matrix_write_P(matrix, PSTR("Raise"));
break;
case L_RAI_E:
matrix_write_P(matrix, PSTR("RaiseEx"));
break;
case L_LOWER:
matrix_write_P(matrix, PSTR("Lower"));
break;
case L_LOW_E:
matrix_write_P(matrix, PSTR("LowerEx"));
break;
case L_ADJUST:
case L_ADJUST_TRI:
case L_ADJUST_TRIE:
matrix_write_P(matrix, PSTR("Adjust"));
break;
default:
snprintf(buf, sizeof(buf), "%d", (short)layer_state);
matrix_write(matrix, buf);
}
matrix_write(matrix, keylog);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
matrix_clear(&matrix);
if (is_keyboard_master()) {
render_status(&matrix);
} else {
render_logo(&matrix);
}
matrix_update(&display, &matrix);
}
#endif // end of SSD1306OLED
//OLED update loop
#ifdef OLED_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (is_keyboard_master()) {
return OLED_ROTATION_0;
} else {
return OLED_ROTATION_180;
}
}
//assign the right code to your layers for OLED display
#define L_BASE _BASE
#define L_LOWER (1<<_LOWER)
#define L_RAISE (1<<_RAISE)
#define L_ADJUST (1<<_ADJUST)
#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
#define L_LOW_E (1<<_LOW_E)
#define L_RAI_E (1<<_RAI_E)
#define L_ADJUST_TRIE (L_ADJUST|L_RAI_E|L_LOW_E)
const char helix_logo[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
0};
static inline void render_logo(void) {
oled_write(helix_logo, false);
}
const char mac_win_logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
static inline void render_status(void) {
char buf[20];
// Render to mode icon
if(keymap_config.swap_lalt_lgui==false){
oled_write(mac_win_logo[0][0], false);
oled_write_P(PSTR("\n"), false);
oled_write(mac_win_logo[0][1], false);
} else {
oled_write(mac_win_logo[1][0], false);
oled_write_P(PSTR("\n"), false);
oled_write(mac_win_logo[1][1], false);
}
#ifdef RGBLIGHT_ENABLE
snprintf(buf, sizeof(buf), " LED mode:%d", (short)RGB_current_mode);
oled_write(buf, false);
#endif
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
oled_write_P(PSTR("\nLayer: "), false);
switch (layer_state) {
case L_BASE:
oled_write_P(default_layer_state == (1UL<<_BAS_E) ? PSTR("BaseEx") : PSTR("Base"), false);
break;
case L_RAISE:
oled_write_P(PSTR("Raise"), false);
break;
case L_RAI_E:
oled_write_P(PSTR("RaiseEx"), false);
break;
case L_LOWER:
oled_write_P(PSTR("Lower"), false);
break;
case L_LOW_E:
oled_write_P(PSTR("LowerEx"), false);
break;
case L_ADJUST:
case L_ADJUST_TRI:
case L_ADJUST_TRIE:
oled_write_P(PSTR("Adjust"), false);
break;
default:
snprintf(buf, sizeof(buf), "%d", (short)layer_state);
oled_write(buf, false);
}
oled_write(keylog, false);
}
bool oled_task_user(void) {
# if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
# endif
if (is_keyboard_master()) {
render_status();
} else {
render_logo();
}
return false;
}
#endif // end of OLED_ENABLE