qmk_firmware/keyboards/keebio/sinc/rev3/config.h

/* Copyright 2022 Danny Nguyen <danny@keeb.io>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#define SPLIT_HAND_PIN GP4

#define SERIAL_USART_FULL_DUPLEX
#define SERIAL_USART_TX_PIN GP0
#define SERIAL_USART_RX_PIN GP1
#define SERIAL_USART_PIN_SWAP

#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

#define I2C_DRIVER I2CD1
#define I2C1_SCL_PIN GP22
#define I2C1_SDA_PIN GP23
Add Sinc Rev. 3 (#18846) * Initial work on adding Sinc Rev. 3 * Add RGB Matrix support * Add encoder map support * Set I2C pins * Update LED locations for right half * Move USB definitions to info.json * Update RGB modes * Replace pin mappings for right half with correct ones * Move config.h back to rev1/rev2 due to addition of rev3 * Convert initial Rev. 3 config work to be data-driven * Convert RGB Matrix config to DD format * More config cleanup * Use full-duplex PIO * Add MCU/bootloader settings for Rev. 2 * Change ISO Enter location since it shares location with Backslash * Adjust build settings to reduce flash/EEPROM usage 2022-10-26 20:44:06 +00:00			`/* Copyright 2022 Danny Nguyen <danny@keeb.io>`

			`This program is free software: you can redistribute it and/or modify`
			`it under the terms of the GNU General Public License as published by`
			`the Free Software Foundation, either version 2 of the License, or`
			`(at your option) any later version.`

			`This program is distributed in the hope that it will be useful,`
			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`GNU General Public License for more details.`

			`You should have received a copy of the GNU General Public License`
			`along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

			`#pragma once`

			`#define SPLIT_HAND_PIN GP4`
Migrate RGB Matrix config to info.json - K (#22911) 2024-02-01 12:05:29 +00:00
Add Sinc Rev. 3 (#18846) * Initial work on adding Sinc Rev. 3 * Add RGB Matrix support * Add encoder map support * Set I2C pins * Update LED locations for right half * Move USB definitions to info.json * Update RGB modes * Replace pin mappings for right half with correct ones * Move config.h back to rev1/rev2 due to addition of rev3 * Convert initial Rev. 3 config work to be data-driven * Convert RGB Matrix config to DD format * More config cleanup * Use full-duplex PIO * Add MCU/bootloader settings for Rev. 2 * Change ISO Enter location since it shares location with Backslash * Adjust build settings to reduce flash/EEPROM usage 2022-10-26 20:44:06 +00:00			`#define SERIAL_USART_FULL_DUPLEX`
			`#define SERIAL_USART_TX_PIN GP0`
			`#define SERIAL_USART_RX_PIN GP1`
			`#define SERIAL_USART_PIN_SWAP`
Migrate RGB Matrix config to info.json - K (#22911) 2024-02-01 12:05:29 +00:00
Add Sinc Rev. 3 (#18846) * Initial work on adding Sinc Rev. 3 * Add RGB Matrix support * Add encoder map support * Set I2C pins * Update LED locations for right half * Move USB definitions to info.json * Update RGB modes * Replace pin mappings for right half with correct ones * Move config.h back to rev1/rev2 due to addition of rev3 * Convert initial Rev. 3 config work to be data-driven * Convert RGB Matrix config to DD format * More config cleanup * Use full-duplex PIO * Add MCU/bootloader settings for Rev. 2 * Change ISO Enter location since it shares location with Backslash * Adjust build settings to reduce flash/EEPROM usage 2022-10-26 20:44:06 +00:00			`#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET`
			`#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U`
Migrate RGB Matrix config to info.json - K (#22911) 2024-02-01 12:05:29 +00:00
[RP2040] update i2c drivers to reflect peripheral number (#19277) 2022-12-11 13:04:29 +00:00			`#define I2C_DRIVER I2CD1`
Add Sinc Rev. 3 (#18846) * Initial work on adding Sinc Rev. 3 * Add RGB Matrix support * Add encoder map support * Set I2C pins * Update LED locations for right half * Move USB definitions to info.json * Update RGB modes * Replace pin mappings for right half with correct ones * Move config.h back to rev1/rev2 due to addition of rev3 * Convert initial Rev. 3 config work to be data-driven * Convert RGB Matrix config to DD format * More config cleanup * Use full-duplex PIO * Add MCU/bootloader settings for Rev. 2 * Change ISO Enter location since it shares location with Backslash * Adjust build settings to reduce flash/EEPROM usage 2022-10-26 20:44:06 +00:00			`#define I2C1_SCL_PIN GP22`
			`#define I2C1_SDA_PIN GP23`