32 lines
1.6 KiB
Markdown
32 lines
1.6 KiB
Markdown
|
# EnvKB 60F
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
A low cost Standard 60% Design which takes inspiration from the CFTKB Mysterium.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Envious-Data](https://github.com/envious-data)
|
||
|
|
* Hardware Supported: EnvKB 60F (Pi Pico)
|
||
|
|
* Hardware Availability: [GitHub](https://github.com/Envious-Data/Env-KB60F)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make enviousdesign/60f:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make enviousdesign/60f:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
|
||
|
|
* **Physical reset**: Hold down the `BOOTSEL` button on the Pi Pico, then either plug the board in or press the `RESET` button.
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT`. In the pre-supplied keymaps it is on the second layer, replacing the Tab key.
|
||
|
|
|
||
|
|
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named `RPI-RP2`. If the CLI is unable to find this device, the compiled `.uf2` file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.
|
||
|
|
|