2022-02-21 06:33:00 +00:00
/*
Copyright 2022 Thomas Baart < thomas @ splitkb . com >
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# pragma once
// Side detection
// col 4 row 3 on right-hand-side
# define SPLIT_HAND_MATRIX_GRID E6, B3 // row first because the board is col2row
# define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
# define MATRIX_MASKED // actual mask is defined by `matrix_mask` in `rev2.c`
/*
* Split Keyboard specific options , make sure you have ' SPLIT_KEYBOARD = yes ' in your rules . mk , and define SOFT_SERIAL_PIN .
*/
# if defined(CONVERT_TO_PROTON_C)
# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve.
# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
# define SERIAL_USART_TX_PIN D3
# define SERIAL_USART_RX_PIN D2
2023-04-06 08:00:54 +00:00
# define WS2812_DI_PIN PAL_LINE(GPIOA, 3)
2022-02-21 06:33:00 +00:00
# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
# define WS2812_PWM_CHANNEL 4 // default: 2
# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU.
# else
2023-04-06 08:00:54 +00:00
# define WS2812_DI_PIN D3
2022-02-21 06:33:00 +00:00
# define SOFT_SERIAL_PIN D2
# endif
# define RGBLED_NUM 20
# ifdef OLED_ENABLE
# define OLED_DISPLAY_128X64
# define SPLIT_OLED_ENABLE
# endif
/* RGB matrix support */
# ifdef RGB_MATRIX_ENABLE
# define SPLIT_TRANSPORT_MIRROR
2022-09-23 12:46:23 +00:00
# define RGB_MATRIX_LED_COUNT RGBLED_NUM // Number of LEDs
2022-02-21 06:33:00 +00:00
# define RGB_MATRIX_SPLIT { 10, 10 }
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170
# define RGB_DISABLE_WHEN_USB_SUSPENDED
# endif
