forked from mirrors/qmk_firmware
40 lines
1.9 KiB
Markdown
40 lines
1.9 KiB
Markdown
|
# orbweaver
|
||
|
|
|
||
|
|
This firmware is for a Razer Orbweaver Chroma keypad, modded to replace the stock MCU
|
||
|
|
with an Elite Pi RP2040 microcontroller. Mod instructions can be found on [geekhack](https://geekhack.org/index.php?topic=119396.0).
|
||
|
|
|
||
|
|
The firmware controls a 6x5 key matrix (4x5 keypad + 6 additional keys
|
||
|
|
on the thumb pad and up to 4 additional keys added by user). It also controls a
|
||
|
|
IS31FL3731 RGB Matrix controller (on the Chroma model) via I2C interface. This requires
|
||
|
|
a single I2C Driver with 20 common anode RGB LEDs. I found that the I2C clock speed must
|
||
|
|
be slowed down to 100 kHz for the IS31 chip to keep up (the default for RP2040 seems to
|
||
|
|
be 400 kHz unless specified otherwise).
|
||
|
|
|
||
|
|
The default key map (layer 0) is a generic layer based on the original Razer defaults.
|
||
|
|
You can change or add layers as needed, and change static colors in keymap.c
|
||
|
|
|
||
|
|
Many thanks to bomtarnes, Drashna, Dasky, sigprof, and casuanoob for helpful discussions
|
||
|
|
and coding suggestions and snippets.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [a_marmot](https://github.com/a-marmot)
|
||
|
|
* Hardware Supported: RP2040 + IS31FL3731
|
||
|
|
* Hardware Availability: [https://geekhack.org/index.php?topic=119396.0](https://geekhack.org/index.php?topic=119396.0)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make handwired/orbweaver:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make handwired/orbweaver:default:flash
|
||
|
|
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 2 ways:
|
||
|
|
|
||
|
|
* Press and hold the upper left hand key on the main keyboard while you plug in the USB.
|
||
|
|
* Press and release both reset buttons on the top of the RP2040 inside the modded unit.
|