forked from mirrors/qmk_firmware
35 lines
1.7 KiB
Markdown
35 lines
1.7 KiB
Markdown
|
# Phoenix Project No 1
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
This is an open source collection of M65-A keyboard replacement PCBs, available both in solderable and hotswap variants.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Eric Becourt, aka Rico](https://github.com/mymakercorner)
|
||
|
|
* Hardware Supported: Phoenix Project No 1 Type S (solder) and Type H (hotswap)
|
||
|
|
* Hardware Availability: hardware is open source, Github repository contains everything to easily have fully assembled PCBs at JLCPCB
|
||
|
|
|
||
|
|
More details in Github repository [here](https://github.com/mymakercorner/Phoenix_Project_No1)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make rico/phoenix_project_no1:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make rico/phoenix_project_no1:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
You can enter the bootloader in 5 ways:
|
||
|
|
|
||
|
|
* **QMK software ways:**
|
||
|
|
* **Bootmagic reset**: hold down the key at (0,0) in the matrix (the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Keycode in layout**: press the key mapped to `QK_BOOT` that is the top left key or Escape on layer 2
|
||
|
|
* **Physical BOOTSEL button**: double tap the BOOTSEL button
|
||
|
|
* **Native RP2040 MCU ways:**
|
||
|
|
* **Physical BOOTSEL and RESET button**: while keyboard is plugged maintain RESET button pressed, press BOOTSEL button then release the RESET button
|
||
|
|
* **Physical RESET button**: maintain RESET button pressed while plugging in the keyboard
|