old-cross-binutils/gdb/testsuite/gdb.trace/tfile.c
Pedro Alves 3f1175a995 tfile.exp: Test printing a non-const global that is not covered by the trace frame; test disassembling.
Make sure we don't fallback to printing the initial value of a
non-const variable in the executable.

Also make sure we can do 'disassemble', as another test that GDB is
able to read read-only parts from the executable (the existing test of
printing constglob also covers that case).

gdb/testsuite/
2013-03-20  Pedro Alves  <palves@redhat.com>
	    Yao Qi  <yao@codesourcery.com>

	* gdb.trace/tfile.c: Add comments.
	(nonconstglob): New global.
	* gdb.trace/tfile.exp: Add comments.  Test printing a non-const
	global that is not covered by the trace frame.  Test
	disassembling.
2013-03-20 11:28:55 +00:00

222 lines
5.1 KiB
C

/* This program does two things; it generates valid trace files, and
it can also be traced so as to test trace file creation from
GDB. */
#include <stdio.h>
#include <string.h>
#include <fcntl.h>
#include <sys/stat.h>
char spbuf[200];
char trbuf[1000];
char *trptr;
char *tfsizeptr;
/* These globals are put in the trace buffer. */
int testglob = 31415;
int testglob2 = 271828;
/* But these below are not. */
const int constglob = 10000;
int nonconstglob = 14124;
int
start_trace_file (char *filename)
{
int fd;
fd = open (filename, O_WRONLY|O_CREAT|O_APPEND,
S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
if (fd < 0)
return fd;
/* Write a file header, with a high-bit-set char to indicate a
binary file, plus a hint as what this file is, and a version
number in case of future needs. */
write (fd, "\x7fTRACE0\n", 8);
return fd;
}
void
finish_trace_file (int fd)
{
close (fd);
}
void
add_memory_block (char *addr, int size)
{
short short_x;
unsigned long long ll_x;
*((char *) trptr) = 'M';
trptr += 1;
ll_x = (unsigned long) addr;
memcpy (trptr, &ll_x, sizeof (unsigned long long));
trptr += sizeof (unsigned long long);
short_x = size;
memcpy (trptr, &short_x, 2);
trptr += 2;
memcpy (trptr, addr, size);
trptr += size;
}
void
write_basic_trace_file (void)
{
int fd, int_x;
short short_x;
fd = start_trace_file ("basic.tf");
/* The next part of the file consists of newline-separated lines
defining status, tracepoints, etc. The section is terminated by
an empty line. */
/* Dump the size of the R (register) blocks in traceframes. */
snprintf (spbuf, sizeof spbuf, "R %x\n", 500 /* FIXME get from arch */);
write (fd, spbuf, strlen (spbuf));
/* Dump trace status, in the general form of the qTstatus reply. */
snprintf (spbuf, sizeof spbuf, "status 0;tstop:0;tframes:1;tcreated:1;tfree:100;tsize:1000\n");
write (fd, spbuf, strlen (spbuf));
/* Dump tracepoint definitions, in syntax similar to that used
for reconnection uploads. */
/* FIXME need a portable way to print function address in hex */
snprintf (spbuf, sizeof spbuf, "tp T1:%lx:E:0:0\n",
(long) &write_basic_trace_file);
write (fd, spbuf, strlen (spbuf));
/* (Note that we would only need actions defined if we wanted to
test tdump.) */
/* Empty line marks the end of the definition section. */
write (fd, "\n", 1);
/* Make up a simulated trace buffer. */
/* (Encapsulate better if we're going to do lots of this; note that
buffer endianness is the target program's enddianness.) */
trptr = trbuf;
short_x = 1;
memcpy (trptr, &short_x, 2);
trptr += 2;
tfsizeptr = trptr;
trptr += 4;
add_memory_block (&testglob, sizeof (testglob));
/* Divide a variable between two separate memory blocks. */
add_memory_block (&testglob2, 1);
add_memory_block (((char*) &testglob2) + 1, sizeof (testglob2) - 1);
/* Go back and patch in the frame size. */
int_x = trptr - tfsizeptr - sizeof (int);
memcpy (tfsizeptr, &int_x, 4);
/* Write end of tracebuffer marker. */
memset (trptr, 0, 6);
trptr += 6;
write (fd, trbuf, trptr - trbuf);
finish_trace_file (fd);
}
/* Convert number NIB to a hex digit. */
static int
tohex (int nib)
{
if (nib < 10)
return '0' + nib;
else
return 'a' + nib - 10;
}
int
bin2hex (const char *bin, char *hex, int count)
{
int i;
for (i = 0; i < count; i++)
{
*hex++ = tohex ((*bin >> 4) & 0xf);
*hex++ = tohex (*bin++ & 0xf);
}
*hex = 0;
return i;
}
void
write_error_trace_file (void)
{
int fd;
const char made_up[] = "made-up error";
int len = sizeof (made_up) - 1;
char *hex = alloca (len * 2 + 1);
fd = start_trace_file ("error.tf");
/* The next part of the file consists of newline-separated lines
defining status, tracepoints, etc. The section is terminated by
an empty line. */
/* Dump the size of the R (register) blocks in traceframes. */
snprintf (spbuf, sizeof spbuf, "R %x\n", 500 /* FIXME get from arch */);
write (fd, spbuf, strlen (spbuf));
bin2hex (made_up, hex, len);
/* Dump trace status, in the general form of the qTstatus reply. */
snprintf (spbuf, sizeof spbuf,
"status 0;"
"terror:%s:1;"
"tframes:0;tcreated:0;tfree:100;tsize:1000\n",
hex);
write (fd, spbuf, strlen (spbuf));
/* Dump tracepoint definitions, in syntax similar to that used
for reconnection uploads. */
/* FIXME need a portable way to print function address in hex */
snprintf (spbuf, sizeof spbuf, "tp T1:%lx:E:0:0\n",
(long) &write_basic_trace_file);
write (fd, spbuf, strlen (spbuf));
/* (Note that we would only need actions defined if we wanted to
test tdump.) */
/* Empty line marks the end of the definition section. */
write (fd, "\n", 1);
trptr = trbuf;
/* Write end of tracebuffer marker. */
memset (trptr, 0, 6);
trptr += 6;
write (fd, trbuf, trptr - trbuf);
finish_trace_file (fd);
}
void
done_making_trace_files (void)
{
}
int
main (int argc, char **argv, char **envp)
{
write_basic_trace_file ();
write_error_trace_file ();
done_making_trace_files ();
return 0;
}