old-cross-binutils/gdb/ChangeLog
Peter Schauer fc3622611e * alpha-tdep.c (heuristic_proc_desc): Increase search limit
for return address register, handle `ret' instruction.
1997-04-26 10:41:14 +00:00

1234 lines
49 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Sat Apr 26 03:38:02 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* alpha-tdep.c (heuristic_proc_desc): Increase search limit
for return address register, handle `ret' instruction.
* corelow.c (get_core_registers): Initialize cf.
* procfs.c: Minor changes to make pre-ANSI compilers happy.
(procfs_notice_signals): Copy traced signal set back to
pi->prrun.pr_trace.
(unconditionally_kill_inferior): If PR_DEAD is defined,
rerun inferior after killing it.
Fri Apr 25 00:10:18 1997 Jeffrey A Law (law@cygnus.com)
* config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
structure value address is found in $a0 now.
* config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
Thu Apr 24 13:31:10 1997 Jeffrey A Law (law@cygnus.com)
* config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
returned in $a0.
(EXTRACT_RETURN_VALUE): Likewise.
* mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
insn at "pc", not "fi->pc".
start-sanitize-tic80
Thu Apr 24 16:11:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tm-tic80.h (NUM_REGS): Four 64bit accumulators.
(REGISTER_BYTE, REGISTER_RAW_SIZE, REGISTER_SIZE,
MAX_REGISTER_RAW_SIZE, REGISTER_VIRTUAL_TYPE): Adjust.
(NPC_REGNUM): Tic80 has a delay slot.
(R0_REGNUM, Rn_REGNUM, An_REGNUM): For sim, provide base/bound for
register blocks.
end-sanitize-tic80
Wed Apr 23 11:18:45 1997 Jeffrey A Law (law@cygnus.com)
* config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
returned in $a0.
(EXTRACT_RETURN_VALUE): Likewise.
Tue Apr 22 11:58:15 1997 Fred Fish <fnf@cygnus.com>
* config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
floatformat_ieee_double_littlebyte_bigword for little endian
target byte order.
* utils.c (floatformat_to_doublest): Create local preswapped
copy of input for floatformat_littlebyte_bigword formats.
(get_field, put_field): Treat floatformat_littlebyte_bigword
the same as floatformat_little.
(floatformat_from_doublest): Postswap output words for
the floatformat_littlebyte_bigwords format.
start-sanitize-tic80
Mon Apr 21 22:44:47 1997 Andrew Cagney <cagney@b1.cygnus.com>
* config/tic80/tic80.mt (SIM): Link in simulator.
end-sanitize-tic80
Tue Apr 22 09:02:10 1997 Stu Grossman (grossman@critters.cygnus.com)
* config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
start-sanitize-v850
config/v850/v850.mt:
end-sanitize-v850
Remove -lm. That's now handled by configure.
* Makefile.in (maintainer-clean): Add distclean to dependencies.
Remove duplicate rm's of files.
start-sanitize-gdbtk
Mon Apr 21 14:00:08 1997 Doug Evans <dje@canuck.cygnus.com>
* gdbtk.c (gdb_disassemble): Store endian-ness in `di'.
end-sanitize-gdbtk
Mon Apr 21 09:49:25 1997 Stu Grossman (grossman@critters.cygnus.com)
* remote-pa.c: Remove. It's broken and no longer necessary.
Sat Apr 19 11:56:10 1997 Per Bothner <bothner@deneb.cygnus.com>
* java-exp.y: Combine TRUE and FALSE into BOOLEAN_LITERAL.
(Avoids name clash with broken AIX header files.)
Sat Apr 19 01:49:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* serial.c (serial_log_command): Fix fputs_unfiltered calls.
* config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
(DONT_RELOCATE_SYMFILE_OBJFILE): Removed.
* xcoffsolib.h (struct vmap): Add new members tvma, toffs and dvma,
remove tadj.
* exec.c (bfdsec_to_vmap): Initialize new vmap members, initialize
tstart and dstart with section VMA.
* rs6000-nat.c (vmap_symtab): Relocate relative to the VMA in the
object file.
(vmap_ldinfo, xcoff_relocate_core): Adjust tstart by section offset
of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
(vmap_exec): Relocate relative to the VMA in the object file,
relocate .bss section as well.
(xcoff_relocate_core): No longer adjust section addresses by VMA.
* rs6000-tdep.c (find_toc_address): Change type of tocbase
to CORE_ADDR.
* xcoffread.c (secnum_to_bfd_section): New routine to get
BFD section from CS section number.
(scan_xcoff_symtab): Make toc_offset section relative.
* symtab.c (total_number_of_methods): Avoid core dump if
baseclass type is still undefined.
Fri Apr 18 17:25:10 1997 Stu Grossman (grossman@critters.cygnus.com)
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
(readchar): Improve doc. Handle random serial errors.
(expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
(e7000_parse_device): Remove serial_flag arg. It's not
necessary.
(e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
(gch): Remove debug output. That's handled by readchar.
(e7000_read_inferior_memory): Handle errors better.
(_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Get rid of the DLL's since we can access the device
directly from Win32s and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
Fri Apr 18 13:38:19 1997 Doug Evans <dje@canuck.cygnus.com>
* remote-sim.c (gdbsim_open): Only pass -E to sim_open if
TARGET_BYTE ORDER_SELECTABLE.
Fri Apr 18 16:52:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
* remote-sim.c (init_callbacks): Initialize poll_quit and magic
fields of gdb_callback.
(gdbsim_stop): Add gdbsim_stop to list of supported client
operations.
(gdbsim_wait, gdbsim_resume): Move call to sim_resume into
sim_wait where gdb is in a position to handle a long running
function.
(gdbsim_cntrl_c): New function. Wrap the sim_resume call in a
SIGINT handler.
(gdb_os_poll_quit): New function. Check for a quit pending on the
console.
start-sanitize-gdbtk
Wed Apr 16 12:33:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (install-only): Make list of gdbtcl files to install
explicit - was picking up files such as ChangeLog etc.
(install-only): Don't blindly create the directory.
end-sanitize-gdbtk
Thu Apr 17 14:30:04 1997 Per Bothner <bothner@deneb.cygnus.com>
* defs.h (enum language): Add language_java.
* java-exp.y, java-lang.c, java-lang.h, java-valprint.c: New files.
* Makefile.in: Update for new files.
* objfiles.c (allocate_objfile): Allow NULL bfd argument.
* symfile.c (deduce_language_from_filename): Recognize .java.
Thu Apr 17 02:20:23 1997 Doug Evans <dje@canuck.cygnus.com>
* m32r-stub.c (stash_registers): Rewrite.
(restore_registers): Renamed to restore_and_return.
(cleanup_stash): New function.
(process_exception): New function.
(_catchException*): Rewrite.
* remote-sim.c (gdbsim_load): Update call to sim_load.
(gdbsim_create_inferior): No longer pass start_address to
sim_create_inferior.
(gdbsim_open): Pass endian indicator as arg.
Tue Apr 15 15:31:09 1997 Stan Shebs <shebs@andros.cygnus.com>
* remote.c (get_offsets): Don't use scanf for interpreting
response to qOffsets.
Tue Apr 15 14:51:04 1997 Ian Lance Taylor <ian@cygnus.com>
* gdbserver/Makefile.in (INSTALL_XFORM): Remove.
(INSTALL_XFORM1): Remove.
(install-only): Use $(program_transform_name) directly, rather
than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
(uninstall): Transform name.
Mon Apr 14 17:06:27 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c (mips_load): Ensure that PC gets updated
after a load on LSI target.
Mon Apr 14 15:54:51 1997 Geoffrey Noer <noer@pizza.cygnus.com>
* procfs.c (notice_signals): fix typo
Mon Apr 14 16:25:10 1997 Ian Lance Taylor <ian@cygnus.com>
* gdbserver/Makefile.in (INSTALL): Change install.sh to
install-sh.
Mon Apr 14 11:55:27 1997 Geoffrey Noer <noer@pizza.cygnus.com>
* config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
since gcc automatically includes it
Thu Apr 10 13:20:53 1997 Geoffrey Noer <noer@cygnus.com>
* procfs.c: Substantial (but incomplete) changes to support
sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
struct now has substructs like struct flt_ctl instead of
just a fltset_t and has a ctl_fd, status_fd, as_fd, and
map_fd instead of a single fd. Non-sysv4.2mp procfs models
still have the structs and multiple fds, but don't use the
entire struct and the four fds all point to the same thing.
We use PROCFS_USE_READ_WRITE to decide whether to talk to
procfs with reads/writes or use ioctl instead. We use
HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
multiple fds or not. PROC_NAME_FMT is split out into
CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
STATUS_PROC_NAME_FMT.
(procfs_notice_signals): now a necessary wrapper around
(notice_signals): which are the new guts for noticing signals
(open_proc_file): gets a new flag arg used in sysv4.2mp to
determine whether or not to attempt to open the ctl_fd.
(procfs_read_status): new local function, reads procfs status
(procfs_write_pcwstop): new local function, writes a PCWSTOP
(procfs_write_pckill): new local function, writes a PCKILL
(unconditionally_kill_inferior): remove signo since we now
just call procfs_write_pckill().
(procfs_xfer_memory): call lseek with SEEK_SET rather than 0
(proc_iterate_over_mappings): the whole function is ifdefed
on UNIXWARE to keep things readable.
Expanded the syscall_table to include new potential sysv4.2mp
members. Note that all ifdefs of UNIXWARE should be eliminated
if possible or renamed to describe what's being selected for a
bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
IRIX specific code now also checks it's not UNIXWARE.
* config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
* config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
"/debug/%d" as PROC_NAME_FMT used to be
Wed Apr 9 11:36:14 1997 Jeffrey A Law (law@cygnus.com)
* mn10300-tdep.c: Almost completely rewritten based on mn10200
port.
* config/mn10300/tm-mn10300.h: Likewise.
Tue Apr 8 10:45:24 1997 Stu Grossman (grossman@critters.cygnus.com)
* config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}: Remove
remote-pa.o from TDEPFILES. Nobody uses it, and besides, it's a
lousy out-of-date clone of remote.c.
Fri Apr 4 08:21:21 1997 Stu Grossman (grossman@critters.cygnus.com)
* remote.c: Fix problems realized while showering.
* (hexnumlen): Add prototype. Use max, not min.
* (remote_write_bytes remote_read_bytes): Fix max packet size
calculations to properly account for packet overhead. Also handle
(probably rare) case where remote_register_buf_size isn't set.
* remote.c: Fix doc for `C' and `S' commands to indicate full
address.
* (remote_ops extended_remote_ops remote_desc remote_write_size):
Make static.
* (remote_fetch_registers remote_write_bytes remote_read_bytes):
Record size of response to fetch registers command, use this to
limit size of memory read and write commands.
* (push_remote_target): New function to make it possible to have
another target switch to the remote target.
* target.h: Add prototype for push_remote_target.
* sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
for hosts which default to unsigned chars (such as SGI's).
* (_initialize_sh_tdep): Don't set remote_write_size. It's now
handled automatically in remote.c.
Thu Apr 3 15:10:30 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(),
find_pc_sect_function(), find_pc_sect_partial_function(): new
functions for debugging overlays; pc without section is ambiguous.
* breakpoint.[ch]: add section pointer to breakpoint struct;
add section argument to check_duplicates(); check section as well
as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
breakpoint_thread_match(), bpstat_stop_status()];
add section argument to describe_other_breakpoints();
use INIT_SAL() macro to zero-out new sal structures;
make resolve_sal_pc() fix up the sal's section as well as its pc;
match on section + pc in clear_command() and delete_breakpoint();
account for overlay sections in insert_breakpoints(),
remove_breakpoint() and breakpoint_re_set_one();
all this to support overlays where a PC is not unique.
* exec.c: change xfer_memory() to handle overlay sections.
* findvar.c: change read_var_value() to handle overlay sections.
* frame.h: declaration for block_for_pc_sect() [blockframe.c].
* infcmd.c: jump_command() warns against jumping into an overlay
that's not in memory. Also use INIT_SAL() to initialize sals.
* infrun.c: wait_for_inferior() sets a flag to invalidate cached
overlay state information; Also use INIT_SAL() to init sals.
* m32r-rom.c: modify load routines to use LMA instead of VMA.
* m32r-stub.c: mask exit value down to 8 bits; screen out any
memory read/writes in the range 600000 to a00000, and ff680000
to ff800000 (hangs because nothing is mapped there); fix strcpy().
* maint.c: maintenance command "translate-address" supports overlays.
* minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
* objfiles.[ch]: add ovly_mapped field to the obj_section struct;
this constitutes gdb's internal overlay mapping table. Add macro
ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
Add function find_pc_sect_section().
* printcmd.c: modify print_address_symbolic() with overlay smarts;
modify address_info() with overlay smarts; add function sym_info()
to support the INFO SYMBOL command (translate address to symbol(s));
modify disassemble_command() to work on unmapped overlays.
* source.c: use INIT_SAL() to initialize sals.
* symfile.[ch]: change generic_load() to use section's LMA address
instead of VMA address, for overlay sections.
Add numerous functions for finding a PC's section / overlay,
translating between VMA and LMA address ranges, determining if an
overlay section is mapped, etc. Add several user commands for
overlay debugging. Add support for a "generic" form of automatically
reading overlay mapping info from the inferior (based on the default
(simple) overlay manager which Cygnus provides as an example).
* symtab.[ch]: add functions find_pc_sect_symtab(),
find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
for lookup; modify lookup_symbol and decode_line_1() to use them;
modify find_function_start_sal() to account for overlay sections;
add macro INIT_SAL() for initializing struct symtab_and_line.
* target.c: fix a comment in the declaration of target_ops.
Thu Apr 3 10:31:12 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
mips_skip_stub, mips_ignore_helper): New functions for dealing
with MIPS16 call/return thunks.
(mips_init_frame_pc_first): New function to implement
INIT_FRAME_PC_FIRST macro; includes code from old macro plus
new code to skip over MIPS16 thunks.
(mips_frame_chain): Skip over MIPS16 thunks.
* config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
mips_skip_stub, mips_ignore_helper): Declare.
(IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
the above functions.
(INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
(mips_init_frame_pc): Declare.
* infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
to decide if certain library function calls should be ignored.
Wed Apr 2 14:16:51 1997 Doug Evans <dje@canuck.cygnus.com>
* remote-sim.c (gdbsim_open): Check return code from sim_open.
Update call to sim_open (new arg SIM_OPEN_DEBUG).
start-sanitize-gdbtk
Tue Apr 1 15:04:21 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
* configure.in (gdbtcl): Create soft-link for gdbtcl/ directory instead
of gdbtk.tcl.
end-sanitize-gdbtk
Mon Mar 31 14:55:53 1997 Ian Lance Taylor <ian@cygnus.com>
* gdbinit.in: New file.
* .gdbinit: Remove.
* configure.in: Generate .gdbinit from gdbinit.in.
* configure: Rebuild.
start-sanitize-tic80
Sun Mar 30 12:28:24 1997 Fred Fish <fnf@cygnus.com>
* config/tic80/tic80.mt: Disable using the simulator
until it is ready.
end-sanitize-tic80
Sat Mar 29 13:57:20 1997 Fred Fish <fnf@cygnus.com>
* COPYING: Install new version of file from FSF.
* copying.c (show_copying_command): Update FSF address.
Fri Mar 28 18:33:41 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (distclean): Remove .gdbinit.
start-sanitize-tic80
Fri Mar 28 15:37:30 1997 Fred Fish <fnf@ninemoons.com>
* config/tic80/tm-tic80.h (NAMES_HAVE_UNDERSCORE): Define.
end-sanitize-tic80
Fri Mar 28 15:38:04 1997 Mike Meissner <meissner@cygnus.com>
* remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
to va_list from void *, since va_list might not be a pointer
type.
start-sanitize-gdbtk
Fri Mar 28 17:04:02 1997 Jason Molenda (crash@godzilla.cygnus.co.jp)
* Makefile.in (gdbtk.o): look for GDBTK_LIBRARY in $(datadir) by
default, not $(srcdir).
end-sanitize-gdbtk
Thu Mar 27 14:21:46 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c: Clean up comment and extraneous semicolon
for mips_monitor_prompt variable.
Thu Mar 27 12:46:58 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c: Add `set monitor-prompt' command.
Wed Mar 26 06:47:44 1997 Mark Alexander <marka@cygnus.com>
Fix from Peter Schauer:
* mdebugread.c (parse_procedure): Set address of procedure to
block start; this fixes problems with shared libraries introduced
by change of Mar 21.
Mon Mar 24 19:43:16 1997 Geoffrey Noer <noer@cygnus.com>
* symtab.c (find_pc_symtab): change to support the case
where the objfile is reordered and contains both coff and
stabs debugging info (continue on if a psymtab isn't found).
Sun Mar 23 16:19:20 1997 Mark Alexander <marka@cygnus.com>
Fixes from Peter Schauer:
* config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
is big-endian and if registers are 32 bits.
* mips-tdep.c (mips_print_register, mips_extract_return_value,
mips_store_return_value): Fix floating-point word-order problems on
little-endian targets introduced by changes of Mar 21.
Sun Mar 23 15:43:27 1997 Stan Shebs <shebs@andros.cygnus.com>
* remote.c (target_resume_hook, target_wait_loop_hook): New
globals.
(remote_resume, remote_wait): Use them.
* d10v-tdep.c: Set the above hooks.
(tracesource): New GDB variable, controls source display in
traces.
(display_trace): Find and display source line if requested.
(trace_info): Mention empty trace buffer if appropriate.
(tdisassemble_command): Robustify argument handling.
* configure.host: Remove extra bogus Linux case.
Sat Mar 22 16:41:35 1997 Fred Fish <fnf@cygnus.com>
* remote-sim.c (simulator_command): Add comment about dealing with
NULL or empty args.
start-sanitize-tic80
* Makefile.in (tic80-tdep.o): Add target.
* configure.tgt: Add tic80 case.
* tic80-tdep.c: New file.
* config/tic80/{tic80.mt, tm-tic80.h}: New files.
end-sanitize-tic80
Sat Mar 22 02:48:11 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* c-exp.y (yylex): Handle nested template parameter lists.
* symtab.c (decode_line_2): Fix test for valid choice number.
Fri Mar 21 19:10:05 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (mips_push_arguments): On non-EABI architectures,
copy first two floating point arguments to general registers, so that
MIPS16 functions will receive the arguments correctly.
(mips_print_register): Print double registers correctly on
little-endian hosts.
(mips_extract_return_value): Return double values correctly
on little-endian hosts.
* mdebugread.c (parse_procedure): Adjust address of procedure relative
to address in file descriptor record; this accounts for constant
strings that may precede functions in the text section. Remove
now-useless lowest_pdr_addr from argument list and all calls.
Fri Mar 21 15:36:25 1997 Michael Meissner <meissner@cygnus.com>
* configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
whether the simulator will be built by whether the Makefile in the
simulator directory was built.
* configure.in (--enable-sim-powerpc): Delete switch.
* configure: Regenerate.
Thu Mar 20 20:52:04 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
in the prologue too.
* remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
compilers.
(gdb_os_evprintf_filtered): Similarly.
Wed Mar 19 16:13:22 1997 Geoffrey Noer <noer@pizza.cygnus.com>
New UnixWare 2.1 configuration
* config/i386/i386v42mp.mt: new
* config/i386/i386v42mp.mh: new
* config/i386/tm-i386v42mp.h: new
* config/i386/nm-i386v42mp.h: new
* configure.tgt: added new entries
* configure.host: added new entries
start-sanitize-gdbtk
Wed Mar 19 15:16:17 1997 Martin M. Hunt <hunt@onions.cygnus.com>
* Makefile.in: Install gdbtcl dir instead of gdbtk.tcl.
* gdbtk.c: Added some ifdefs for Windows. Changed GDBTK_FILENAME
to GDBTK_LIBRARY, which is now a path to search.
(gdb_path_conv): New function. Convert Cygwin32 pathname to
DOS-style pathname.
* {aclocal.m4,configure.in}: Changes for Windows builds.
* configure: Rebuilt.
end-sanitize-gdbtk
Mon Mar 17 17:52:00 1997 J.T. Conklin <jtc@cygnus.com>
* dsrec.c (load_srec): Print leading zeroes when printing section
addresses.
Mon Mar 17 15:00:16 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* remote-sim.h: Delete - moved to ../include/remote-sim.h.
* Makefile.in (remote_utils_h): Update path to remote-sim.h.
Fri Mar 7 20:55:28 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* remote-sim.c (flush_stdout, write_stderr, flush_stderr,
vprintf_filtered, evprintf_filtered): Callbacks that accept
varargs.
Sat Mar 15 00:50:46 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* breakpoint.c (insert_breakpoints, watchpoint_check,
bpstat_stop_status): Do not disable watchpoints going out of scope.
(insert_breakpoints): Make sure that the current frame is valid
before calling find_frame_addr_in_frame_chain.
* top.c (setup_user_args): Handle quotes and backslashes.
(print_gdb_version): Update copyright year.
Fri Mar 14 15:44:03 1997 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
start-sanitize-gdbtk
Fri Mar 14 10:01:29 1997 Tom Tromey <tromey@cygnus.com>
* configure: Regenerated.
* configure.in (LIBS): Re-reverse order of TCL_LIBS and TK_LIBS.
end-sanitize-gdbtk
Thu Mar 13 22:51:00 1997 Dawn Perchik <dawn@cygnus.com>
* utils.c (pollquit, notice_quit): If _WIN32, limit test for
cntl-C to wingdb.
(initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols
except under wingdb. (Contributed by Martin Hunt).
Thu Mar 13 12:40:49 1997 Tom Tromey <tromey@cygnus.com>
* configure: Regenerated.
* configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
Thu Mar 13 11:00:22 1997 Doug Evans <dje@canuck.cygnus.com>
* remote-sim.h (sim_state, SIM_DESC): New types.
(sim_open): Return a `descriptor' as result.
(*): New argument of descriptor result from sim_open.
* remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
(gdbsim_open): Record result of sim_open in gdbsim_desc.
Pass argv list to sim_open, argv[0] = pseudo program name.
(*): Pass gdbsim_desc to sim_foo fns.
Wed Mar 12 14:40:06 1997 Tom Tromey <tromey@cygnus.com>
* config.in: Regenerated.
* acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
HAVE_HPUX_THREAD_SUPPORT): Define.
start-sanitize-gdbtk
Wed Mar 12 14:29:52 1997 Tom Tromey <tromey@cygnus.com>
* gdbtk.c (x_event): Use Tcl_DoOneEvent, TCL_DONT_WAIT,
TCL_ALL_EVENTS.
* configure: Regenerated.
* configure.in (ENABLE_GDBTK): Put TCL_LIBS after TK_LIBS in
LIBS.
end-sanitize-gdbtk
Tue Mar 11 07:25:27 1997 Mark Alexander <marka@cygnus.com>
First cut at supporting simulators in gdbserver:
* configure, configure.in: Allow gdbserver to be configured
for cross-target environments.
* gdbserver/Makefile.in: Add simulator support.
* gdbserver/configure.in: Eliminate assumption that host == target.
Simplify using gdb/configure.tgt and gdb/configure.host.
Fix other minor configuration errors.
* gdbserver/low-sparc.c: Fix compile error.
* gdbserver/remote-utils.c: Eliminate assumption that registers
and addresses are four bytes. Fix minor compile errors and warnings.
* gdbserver/server.c: Rewrite numerous instances of identical code
for starting inferior processes to call new function start_inferior.
Eliminate assumption that registers and addresses are four bytes.
* gdbserver/server.h: Add missing prototypes to eliminate compiler
warnings.
* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
* config/i386/linux.mh: Eliminate gdbserver support as a first step
in moving such support from host to target makefile fragments.
* config/i386/linux.mt: Move gdbserver support here from linux.mh.
Mon Mar 10 12:27:47 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* symtab.h (INIT_SAL): New macro to initialize symtab_and_line,
to insure consistant initialization of unused fields to zero.
* symtab.c: replace initializations of sals with new macro INIT_SAL.
* breakpoint.c: ditto.
* infrun.c: ditto.
* infcmd.c: ditto.
* source.c: add call to INIT_SAL macro.
Sat Mar 8 00:16:37 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* sparc-tdep.c (isbranch): Always handle v9 branch instructions,
they might get used on 32 bit targets as well.
Wed Mar 5 19:34:09 1997 Bob Manson <manson@charmed.cygnus.com>
* remote-mips.c (mips_exit_debug): Some IDT boards don't
send the full exit string.
Wed Mar 5 12:59:27 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-tdep.c (mn10200_push_arguments): Handle new calling
conventions.
(mn10200_store_struct_return): Likewise.
Tue Mar 4 10:31:02 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (mips_fetch_instruction): New function; replace
common code throughout with calls to it.
(mips_find_saved_regs): Examine MIPS16 entry instruction to determine
correct saved addresses of $s0 and $s1.
(mips_find_saved_regs, mips16_heuristic_proc_desc): Use MIPS_REGSIZE
instead of hardcoded 4.
(mips16_skip_prologue): Handle extended instructions correctly.
Mon Mar 3 12:29:20 1997 Doug Evans <dje@canuck.cygnus.com>
* defs.h (LONGEST): Move #ifndef LONGEST to outside.
Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
Thu Feb 27 18:54:11 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
New macros for testing, setting, and clearing bit 0 of addresses.
Change numerous bits of code where bit 0 was being manipulated
to use these macros.
Thu Feb 27 14:12:41 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c: Put back the form feeds.
Thu Feb 27 12:04:24 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c: Remove form feeds (^L) from source.
(mips_initialize): LSI PMON doesn't support 'set regsize' command.
(pmon_wait): Don't need to exit and re-enter debug mode on LSI
PMON after a continue; it causes target program misbehavior.
(mips_fetch_register): Don't fetch unsupported registers; this
cuts down on wasted serial traffic.
Thu Feb 27 09:38:16 1997 Stu Grossman (grossman@critters.cygnus.com)
* configure.in configure (HPUX/OSF thread support): Enable this
only when running GCC, since HP's thread header files use ANSI C
which is not supported by their default compiler.
* configure.host (i[3456]86-*-windows): Disable long long
support for WinGDB. Add mswin to configdirs.
* configure.in configure: Move calls to configure.host and
configure.tgt to the top of configure.in to allow them to set
config variables before they are referenced.
Tue Feb 25 20:21:52 1997 Stan Shebs <shebs@andros.cygnus.com>
* configure.tgt (mips*-*-lnews*): New target.
Mon Feb 24 16:35:00 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
if we're not the innermost frame. Fix minor typos.
Sat Feb 22 03:39:50 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* stabsread.c (read_type): Fix handling of template names
with template parameters containing `::'.
* valops.c (search_struct_field, search_struct_method):
Pass correct valaddr parameter to baseclass_offset.
Prevent gdb crashes by making sure that the virtual base pointer
from an user object still points to accessible memory.
Tue Feb 18 13:36:34 1997 Mark Alexander <marka@cygnus.com>
* maint.c: Eliminate -Wall warnings by including some header files.
Tue Feb 18 13:06:30 1997 Mark Alexander <marka@cygnus.com>
* remote-sim.c (init_callbacks): Undo previous change.
Tue Feb 18 11:13:00 1997 Dawn Perchik <dawn@cygnus.com>
* maint.c: Fix dereference of pointer.
* remote-sim.c: Fix reference of structure member "last_error".
* debugify.c: Include config.h to get ANSI definitions.
Sat Feb 15 17:43:46 1997 Stu Grossman (grossman@critters.cygnus.com)
* remote-vx.c (vx_attach): Remove code added by kung. It made no
sense.
Fri Feb 14 13:00:07 1997 Ian Lance Taylor <ian@cygnus.com>
* main.c (print_gdb_help): Make static to match declaration.
Thu Feb 13 18:18:18 1997 Dawn Perchik <dawn@cygnus.com>
* remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
Wed Feb 12 15:58:00 1997 Dawn Perchik <dawn@cygnus.com>
* debugify.c, debugify.h: Make safe for non-ansi compilers.
Wed Feb 12 15:30:00 1997 Dawn Perchik <dawn@cygnus.com>
* defs.h: Fix prototypes for new cleanup functions.
Wed Feb 12 15:08:47 1997 Dawn Perchik <dawn@cygnus.com>
* debugify.c, debugify.h: Fix for general gnu use. Remove C++
comment, add PARAMS, add license info and fix indentation.
Wed Feb 12 14:42:47 1997 Dawn Perchik <dawn@cygnus.com>
* debugify.c, debugify.h: New files. Provide common macros
for writing debug info to a log file or stdio.
Wed Feb 12 02:44:39 1997 Dawn Perchik <dawn@cygnus.com>
* c-valprint.c (c_val_print): Fix printing for arrays defined
with 0 length.
Tue Feb 11 22:24:39 1997 Dawn Perchik <dawn@cygnus.com>
* defs.h: Fix cntl-C to read from the Windows message queue.
Add prototypes for make_final_cleanup (and the other cleanup
routines.
* remote-e7000.c: Fix sync code to timeout if unable to sync.
Change sync code to report status while trying to sync-up
with hardware. Add debugging output and document.
* ser-e7kpc.c: Swap order of len & offset to match implementation.
Add debugging output and document.
* serial.c: Add debugging output.
* top.c: Add call to do_final_cleanups.
Remove conditionals preventing Win32 from getting SIGQUIT.
* utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
chain as a parameter. Extract this generic code from the cleanup
routines into separate funtions (*_my_cleanup). Keep old
functionality by passing "cleanup_chain" to the new funtions.
Define the cleanup chain "final_cleanup_chain" to be a cleanup
chain which will be executed only when gdb exits. Add functions
(*_final_cleanup) to match the original (*_cleanup) functions.
(pollquit, quit, notice_quit): Fix to read cntl-C from the
Windows message queue.
Tue Feb 11 15:36:31 1997 Doug Evans <dje@canuck.cygnus.com>
* m32r-rom.c: #include <sys/types.h>.
#ifdef out new load support if wingdb.
* m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
Tue Feb 11 12:28:09 1997 Jeffrey A Law (law@cygnus.com)
* config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
* mn10200-tdep.c (mn10200_store_struct_return): New function.
* config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
extracting a return value from a register pair.
* mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
be two byte aligned. Round argument sizes up to two byte boundary.
Write out args in two byte hunks.
(mn10200_push_return_address): Implement.
* config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
structures > 8 bytes (temporary).
(STORE_RETURN_VALUE): Likewise.
(CALL_DUMMY): No longer undefine.
(USE_STRUCT_CONVENTION): Use for args > 8 bytes.
(REG_STRUCT_HAS_ADDR): Define.
start-sanitize-r5900
Fri Feb 07 09:04:37 1997 Gavin Koch <gavin@cygnus.com>
* configure.tgt: added r5900.
end-sanitize-r5900
Mon Feb 10 18:35:55 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (non_heuristic_proc_desc): New function.
(find_proc_desc): Move non-heuristic proc search code into separate
function.
(gdb_print_insn_mips): Use non-heuristic method to find procedure
descriptor, to avoid prologue examination when disassembling.
* remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
aka MicroMeteor board).
(mips_exit_debug): Prevent protocol reinitialization if an error
occurs while exiting debug mode.
Mon Feb 10 16:11:57 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-tdep.c: Remove lots of debugging printfs, update/improve
comments, formatting, etc. Plus other minor fixes for problems
I found during my first pass over the mn10200 port.
(mn10200_analyze_prologue): New function.
(mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
* config/mn10200/tm-mn10200.h: Lots of updates/improvements to
comments, formatting, etc. Minor fixes for problems I found during
my first pass over the mn10200 port.
(TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
pointers.
(REGISTER_VIRTUAL_TYPE): Define as a long.
(EXTRACT_RETURN_VALUE): Rework to deal with long ints living
in register pairs.
(STORE_RETURN_VALUE): Similarly.
* blockframe.c (generic_get_saved_regs): Remove unused variable
"addr".
* breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
inside #ifdef CALL_DUMMY.
(watch_command_1): Initialize target_resources_ok.
* command.c (do_setshow_command): Provide dummy initialization
for "match".
* valops.c (find_function_addr): Move function & prototype inside
#ifdef CALL_DUMMY.
(value_arg_coerce): Similarly.
(value_of_variable): Provide dummy initialization of "frame".
start-sanitize-gdbtk
Mon Feb 10 13:50:53 1997 Stu Grossman (grossman@critters.cygnus.com)
* gdbtk.c (call_wrapper): Clear running_now if an error occurs.
end-sanitize-gdbtk
Mon Feb 10 07:54:26 1997 Fred Fish <fnf@cygnus.com>
* xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
to prim_record_minimal_symbol_and_info call that was missed in Jan 3
change.
(scan_xcoff_symtab): Ditto.
Sun Feb 09 09:23:26 1997 Mark Alexander <marka@cygnus.com>
* remote-mips.c (common_breakpoint): Prevent 64-bit addresses
from being sent to 32-bit targets by masking off upper bits.
* mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
of PC on 32-bit targets.
(mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
frame setup instruction.
(mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
(mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
prologue instruction. Fix warnings and bugs found by gcc -Wall.
* buildsym.c (finish_block): Improve handling of overlapping blocks;
fixes problem on MIPS16 printing function arguments.
Sat Feb 8 01:14:43 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* dwarf2read.c (dwarf2_linkage_name): New function to get
the linkage name of a die from DW_AT_MIPS_linkage_name or
DW_AT_name.
(read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
new_symbol): Use it instead of accessing DW_AT_name.
(read_partial_die): Use DW_AT_MIPS_linkage name as name of the
partial die if present.
(dwarf2_add_member_fn): Make a copy of physname on the type obstack.
Fri Feb 7 10:06:22 1997 Jeffrey A Law (law@cygnus.com)
* blockframe.c (generic_frame_chain_valid): If the new frame
is not INNER_THAN the old frame, then it's not valid.
Tue Feb 04 09:04:37 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
(mips16_heuristic_proc_desc): Recognize jal(x) instruction.
Mon Feb 03 17:57:58 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (mips16_decode_reg_save): Distinguish between
sd and sw instructions correctly.
(heuristic_proc_start): Add support for MIPS16.
(mips16_get_imm, mips16_heuristic_proc_desc,
mips32_heuristic_proc_desc): New helper functions for
heuristic_proc_desc.
(heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
(mips_push_arguments): Don't align small arguments in EABI.
(mips32_skip_prologue): Attempt to shrink code size a little.
Mon Feb 3 11:06:05 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* m32r-stub.c: New -- remote protocol support for M32R cpu.
* m32r-rom.c: Several experiments with improved download time.
Fri Jan 31 08:26:39 1997 Mark Alexander <marka@cygnus.com>
* mips-tdep.c (MIPS16_INSTLEN): Define.
(mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
(heuristic_proc_start): Recognize 'entry' pseudo-op as a start
of function on MIPS16.
(mips32_skip_prologue, mips16_skip_prologue): New helper functions
for mips_skip_prologue.
(mips_skip_prologue): Recognize both 16- and 32-bit prologues.
Wed Jan 29 12:45:54 1997 Michael Meissner <meissner@tiktok.cygnus.com>
* config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
../sim/common/libcommon.a.
Tue Jan 28 15:54:13 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* blockframe.c: fix a null pointer ref in generic_get_saved_register
Tue Jan 28 15:39:50 1997 Geoffrey Noer <noer@cygnus.com>
* mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
working.
Mon Jan 27 14:31:52 1997 Mark Alexander <marka@cygnus.com>
First set of changes for mips16:
* config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
(ABOUT_TO_RETURN): Call new function mips_about_to_return.
(mips_breakpoint_from_pc, mips_about_to_return): Declare.
* mem-break.c (memory_breakpoint_from_pc): New function.
(memory_insert_breakpoint, memory_remove_breakpoint): Use
memory_breakpoint_from_pc to determine breakpoint contents and size.
* target.h (memory_breakpoint_from_pc): Declare.
* monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
to determine size of breakpoint instruction.
* mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
New helper functions for mips_find_saved_regs.
(mips_find_saved_regs): Recognize mips16 prologues.
(mips_addr_bits_remove): Strip off upper 32 bits of address
when target CPU is 32 bits but CORE_ADDR is 64 bits.
(mips_step_skips_delay): No branch delay slot on mips16.
(gdb_print_insn_mips): Disassemble mips16 code.
(mips_breakpoint_from_pc, mips_about_to_return): New functions.
Mon Jan 27 10:34:03 1997 Jeffrey A Law (law@cygnus.com)
* tm-mn10200.h (NUM_REGS): Decrease to 12.
(REGISTER_NAMES): Elimination registers not found on the mn10200.
(PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
(LIR_REGNUM, LAR_REGNUM): Delete. They don't exist on the mn10200.
Sat Jan 25 00:07:59 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* dwarf2read.c: Replace integral tag, name and form fields in
internal structure definitions with the corresponding enumeration
types from dwarf2.h. Add default cases to switches on enumerations
where appropriate.
Make quoting of string arguments in complaint messages consistent.
Check for NULL returns from DW_STRING.
(struct partial_die_info): Add sibling and has_type fields, remove
unused value field.
(DW_*): Move access macro definitions near the definition of the
attribute structure.
(struct field_info): New structure to pass information about fields
and member functions between die processing routines.
(dwarf2_build_psymtabs_hard): Set cu_header_offset.
(scan_partial_symbols): Do not enter DW_TAG_subprogram dies into
the partial symbol table if the DW_AT_*_pc attributes are missing.
Add file scope base type definitions to the partial symbol table.
Skip over child dies if the die has a sibling attribute.
(add_partial_symbol): Enter global variables with type attributes
and without location descriptors into the partial symbol table.
Store value of DW_TAG_variable dies in the partial symbol table.
Do not enter global variables into the minimal symbol table.
Add base type definitions to the partial symbol table.
(psymtab_to_symtab_1): Use dwarf2_get_pc_bounds to determine highpc.
(process_die): Move check for DW_AT_low_pc to read_func_scope.
Add a typedef symbol for base type definitions to the symbol table.
Ignore DW_TAG_inlined_subroutine tags for now.
(read_file_scope): Use dwarf2_get_pc_bounds to determine pc bounds.
(read_func_scope, read_lexical_block_scope): Use dwarf2_get_pc_bounds
to determine pc bounds, ignore dies with invalid bounds.
(dwarf2_get_pc_bounds): New routine to extract and validate the
DW_AT_*_pc attributes of a die.
(dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
New functions to handle fields and member functions.
(read_structure_scope): Rewritten to use them.
(read_array_type): Renamed from dwarf_read_array_type.
Default upper array bound to describe an array with unspecified
length.
Create array types in backwards order, as dwarf2 puts out the array
dimensions from left to right.
(read_subroutine_type): Handle DW_TAG_unspecified_parameters,
DW_AT_artificial and DW_AT_prototyped.
(read_base_type): Make an unsigned type for DW_ATE_boolean.
Pass objfile to dwarf_base_type.
(read_partial_die): Use read_attribute to read in the attributes.
Handle DW_AT_sibling and DW_AT_type.
Follow references when determining DW_AT_name and DW_AT_external
attributes of the die.
Validate DW_AT_*_pc attributes.
(read_full_die): Use read_attribute to read in the attributes.
(read_attribute): New function to read an attribute described
by an abbreviated attribute.
(new_symbol): Relocate symbol value for DW_TAG_label with baseaddr.
Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
Change symbol class for global variables with a zero valued location
descriptor to LOC_UNRESOLVED.
Handle DW_AT_const_value attributes for DW_TAG_variable,
DW_TAG_formal_parameter and DW_TAG_enumerator.
Build a typedef symbol for DW_TAG_base_type.
(dwarf2_const_value): New routine to copy a constant value from an
attribute to a symbol.
(dwarf_base_type): Use passed in objfile, not current_objfile
when calling dwarf2_fundamental_type.
(dump_die): Use DW_* accessor macros to access values of attributes.
(decode_locdesc): Handle DW_OP_plus_uconst.
Wed Jan 22 01:31:16 1997 Geoffrey Noer <noer@cygnus.com>
* mn10200-tdep.c: New file.
* config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
SP_REGNUM and FP_REGNUM are different, also no lar or lir.
* config/mn10200/mn10200.mt: New file.
* configure.tgt: add mn10200 entry.
Tue Jan 21 18:32:23 1997 Stu Grossman (grossman@lisa.cygnus.com)
* configure.in configure: Check if host has libdl if doing
Solaris threads.
Tue Jan 21 17:03:26 1997 Geoffrey Noer <noer@cygnus.com>
* mn10300-tdep.c: Wrote/fixed implementations of
mn10300_frame_chain, mn10300_init_extra_frame_info,
mn10300_frame_saved_pc
* config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
and INIT_FRAME_PC macros.
Tue Jan 21 17:01:20 1997 Stu Grossman (grossman@lisa.cygnus.com)
* configure.in configure: Check if host has libm. Make sure we
are using gcc when using the -export-dynamic option. Fixes a
problem with building under Solaris/SunPro cc.
Mon Jan 20 13:52:13 1997 Mark Alexander <marka@cygnus.com>
* config/mips/{embed,embed64,embedl,embedl64}.mt:
Link in simulator on MIPS embedded targets.
Sat Jan 18 02:31:29 1997 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* blockframe.c (frameless_look_for_prologue): Mark frames
with a zero PC as frameless to improve backtraces from core dumps
caused by dereferencing a NULL function pointer.
Thu Jan 16 14:10:41 1997 Geoffrey Noer <noer@cygnus.com>
* config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
Tue Jan 14 16:01:06 1997 Geoffrey Noer <noer@cygnus.com>
* mn10300-tdep.c: made a lot more generic, ripping out code
from copied target (no more mn10300_scan_prologue,
init_extra_frame_info, and mn10300_fix_call_dummy calls)
* config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
and INIT_FRAME_PC macros
Thu Jan 9 11:44:40 1997 Michael Snyder <msnyder@cleaver.cygnus.com>
* sparc-tdep.c (sparc_frame_find_saved_regs): Don't use
FP_REGISTER_BYTES to compute offsets into the saved frame,
since it fails for SPARC targets configured without any
FP regs. Instead, use DUMMY_STACK_REG_BUF_SIZE.
Mon Jan 6 11:15:14 1997 Stu Grossman (grossman@critters.cygnus.com)
* symtab.c (fixup_symbol_section): Handle NULL symbols without
crashing.
Fri Jan 3 12:08:16 1997 Stu Grossman (grossman@critters.cygnus.com)
* Makefile.in configure configure.in: Remove ENABLE_CLIBS,
ENABLE_OBS, and THREAD_DB_OBS. These are consolidated into LIBS
and CONFIG_OBS.
* configure configure.in: Clean up test cases around thread support.
start-sanitize-v850
* configure.tgt (v850-*-*): Include v850ice.o and v850.lib if
host is Windows.
end-sanitize-v850
* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
printcmd.c valops.c value.h values.c: Add bfd_section arg to
value_at and value_at_lazy.
* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
Add bfd_section arg to prim_record_minimal_symbol_and_info.
* corefile.c gdbcore.h printcmd.c valops.c: Use read_memory_section
instead of read_memory. It takes a bfd_section arg.
* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h: Remove
unnecessary cast for assignment of struct dbx_symfile_info.
Struct objfile now uses a real pointer instead of PTR for this
element.
* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
text, data and bss into dbx_symfile_info.
* exec.c (xfer_memory): Handle transfers for user-specified
sections.
* findvar.c (read_var_value locate_var_value): Copy bfd section
from the symbol to the value.
* gdb-stabs.h: Add section pointers for text, data and bss
sections.
* maint.c (translate address command): Add test code for overlay
address translation.
* printcmd.c (do_examine do_one_display): Now takes a bfd section
arg.
* (print_formatted x_command): Record current section along with
current address for repeated commands.
* sparc-nat.c (fetch_inferior_registers): Change
target_xfer_memory to target_{read write}_memory to allow changes
to target_xfer_memory interface for section info.
* symmisc.c (dump_msymbols print_symbol): Print section
assocaited with symbol.
* symtab.c (fixup_symbol_section): New routine to
add section info to symbols returned by lookup_symbol.
* symtab.h (struct general_symbol_info): Add bfd section to
symbols.
* target.c target.h (target_xfer_memory): Add bfd section to
args.
* (target_read_memory_section): New routine to read data from a
specific section.
* (target_memory_bfd_section): New global variable to pass bfd
section in to targets.
* valarith.c (value_add value_addr value_array): Preserve bfd
section when computing new value.
* value.h (struct value): Add bfd section to values.
* values.c (allocate_value value_copy): Initialize/preserve bfd
section.
* (unpack_double): Clean up _MSC_VER conditionals to remove
duplicate code.
start-sanitize-v850
* v850ice.c: New module to support communication with NEC's
PC-based ICE.
* config/v850/tm-v850.h (REGISTER_NAMES): Replace sp, gp, fp, and
ep names with rxx names. sp and fp are renamed via a different
mechanism.
end-sanitize-v850
Fri Jan 3 14:20:05 1997 Geoffrey Noer <noer@cygnus.com>
* mn10300-tdep.c (mn10300_push_arguments): rewrote,
also removed code elsewhere that made use of RP_REGNUM.
* config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
For older changes see ChangeLog-96
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: