old-cross-binutils/gdb/altos-xdep.c
Jim Kingdon 16726dd15b The point of these changes is to avoid reading the frame pointer
and stack pointer during stepping, to speed things up.
	A.  Changes to not select a frame until we need a selected frame:
	    * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
	    * infrun.c (wait_for_inferior): Move call to select_frame back to
	    normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
	    Law, but the change was my idea); the only reason for that change
	    was so we could save and restore the selected frame in
	    wait_for_inferior, and now that flush_cached frames clears the
	    selected frame, that should work OK now.
	B.  Changes to not create a current_frame until we need one:
	    * blockframe.c (get_current_frame): If current_frame is NULL, try
	    to create an innermost frame.
	    * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
	    infrun.c (wait_for_inferior), thread.c (thread_switch),
	    convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
	    alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
	    h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
	    hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
	    i960-tdep.c (pop_frame), m68k-tdep.c
	    (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
	    (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
	    (pop_frame), config/arm/tm-arm.h (POP_FRAME),
	    config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
	    (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
	    config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
	    (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
	    call create_new_frame.
	    * corelow.c (core_open), altos-xdep.c (core_file_command),
	    arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
	    m3-nat.c (select_thread), sun386-nat.c (core_file_command),
	    umax-xdep.c (core_file_command): Don't call create_new_frame; do
	    call flush_cached_frames.
	    * blockframe.c (reinit_frame_cache): Don't call create_new_frame
	    or select_frame.
	C.  Changes to get rid of stop_frame_address and instead only
	fetch the frame pointer when we need it.
	    * breakpoint.c (bpstat_stop_status): Remove argument
	    frame_address; use FRAME_FP (get_current_frame ()).
	    * infrun.c (wait_for_inferior): Don't pass frame pointer to
	    bpstat_stop_status.
	    * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
	    ()) instead of stop_frame_address.
	    * infrun.c (save_inferior_status, restore_inferior_status),
	    inferior.h (struct inferior_status): Don't save and restore
	    stop_frame_address.
	    * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
	    (select_thread): Remove stop_frame_address and uses thereof.
	D.  Same thing for the stack pointer.
	    * infrun.c (wait_for_inferior): Remove stop_sp and replace
	    uses thereof with read_sp ().
	E.  Change to eliminate one nasty little spot where we were
	wanting to know the frame pointer from before the current step
	(idea from GDB 3.5, which saved my ass, because my other ideas of
	how to fix it were very baroque).
	    * infrun.c: Remove prev_frame_address.
	    * infrun.c (wait_for_inferior, step_over_function): Use
	    step_frame_address instead of prev_frame_address.
	F.  Same basic idea for the stack pointer.
	    * inferior.h, infcmd.c: New variable step_sp.
	    * infcmd.c (step_1, until_next_command): Set it.
	    * infrun.c: Remove prev_sp and replace uses by step_sp.
	    * infrun.c (wait_for_inferior): If we get out of the step
	    range, then set step_sp to the current stack pointer before we
	    start going again.
1994-10-08 03:41:21 +00:00

164 lines
4.3 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Low level interface to ptrace, for GDB when running under m68k SVR2 Unix
on Altos 3068. Report bugs to Jyrki Kuoppala <jkp@cs.hut.fi>
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#ifdef USG
#include <sys/types.h>
#endif
#include <sys/param.h>
#include <sys/dir.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#ifdef USG
#include <sys/page.h>
#ifdef ALTOS
#include <sys/net.h>
#include <errno.h>
#endif
#endif
#include "gdbcore.h"
#include <sys/user.h> /* After a.out.h */
#include <sys/file.h>
#include <sys/stat.h>
/* Work with core dump and executable files, for GDB.
This code would be in core.c if it weren't machine-dependent. */
void
core_file_command (filename, from_tty)
char *filename;
int from_tty;
{
int val;
extern char registers[];
/* Discard all vestiges of any previous core file
and mark data and stack spaces as empty. */
if (corefile)
free (corefile);
corefile = 0;
if (corechan >= 0)
close (corechan);
corechan = -1;
data_start = 0;
data_end = 0;
stack_start = STACK_END_ADDR;
stack_end = STACK_END_ADDR;
/* Now, if a new core file was specified, open it and digest it. */
if (filename)
{
filename = tilde_expand (filename);
make_cleanup (free, filename);
if (have_inferior_p ())
error ("To look at a core file, you must kill the program with \"kill\".");
corechan = open (filename, O_RDONLY, 0);
if (corechan < 0)
perror_with_name (filename);
/* 4.2-style (and perhaps also sysV-style) core dump file. */
{
struct user u;
unsigned int reg_offset;
val = myread (corechan, &u, sizeof u);
if (val < 0)
perror_with_name ("Not a core file: reading upage");
if (val != sizeof u)
error ("Not a core file: could only read %d bytes", val);
data_start = exec_data_start;
#if !defined (NBPG)
#define NBPG NBPP
#endif
#if !defined (UPAGES)
#define UPAGES USIZE
#endif
data_end = data_start + NBPG * u.u_dsize;
stack_start = stack_end - NBPG * u.u_ssize;
data_offset = NBPG * UPAGES + exec_data_start % NBPG /* Not sure about this //jkp */;
stack_offset = NBPG * (UPAGES + u.u_dsize);
/* Some machines put an absolute address in here and some put
the offset in the upage of the regs. */
reg_offset = (int) u.u_state;
if (reg_offset > NBPG * UPAGES)
reg_offset -= KERNEL_U_ADDR;
memcpy (&core_aouthdr, &u.u_exdata, sizeof (AOUTHDR));
printf_unfiltered ("Core file is from \"%s\".\n", u.u_comm);
/* I don't know where to find this info.
So, for now, mark it as not available. */
N_SET_MAGIC (core_aouthdr, 0);
/* Read the register values out of the core file and store
them where `read_register' will find them. */
{
register int regno;
for (regno = 0; regno < NUM_REGS; regno++)
{
char buf[MAX_REGISTER_RAW_SIZE];
val = lseek (corechan, register_addr (regno, reg_offset), 0);
if (val < 0
|| (val = myread (corechan, buf, sizeof buf)) < 0)
{
char * buffer = (char *) alloca (strlen (reg_names[regno])
+ 30);
strcpy (buffer, "Reading register ");
strcat (buffer, reg_names[regno]);
perror_with_name (buffer);
}
supply_register (regno, buf);
}
}
}
if (filename[0] == '/')
corefile = savestring (filename, strlen (filename));
else
{
corefile = concat (current_directory, "/", filename, NULL);
}
flush_cached_frames ();
select_frame (get_current_frame (), 0);
validate_files ();
}
else if (from_tty)
printf_unfiltered ("No core file now.\n");
}