old-cross-binutils/gdb/ser-go32.c
Jim Kingdon c2e247c4ff * inftarg.c: Remove unused include of terminal.h.
* signals.h: Don't undefine signals anymore.
	* main.c: Use job_control from serial.h.
	* fork-child.c (fork_inferior): Use gdb_setpgid.
	* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
	* utils.c (quit): Use current_target->to_terminal_ours to figure
	out whether we care about lack of job control, rather than __GO32__.
	* utils.c: Include serial.h not terminal.h
	(quit): Use job_control not TIOCGPGRP.
	* terminal.h: Don't undefine TIOCGPGRP.
	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
	* utils.c (quit): Use it.
	* serial.h: Add SERIAL_UN_FDOPEN.
	* utils.c (quit): Use it.
	* ser-unix.c: Add process group to ttystate.
	[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
	* inflow.c: Include serial.h not terminal.h.
	Use serial.h stuff to replace most of the maze of #ifdef's.
	* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
	* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
	* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
	Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
	SERIAL_SET_PROCESS_GROUP.
	* inflow.c: Use them.
	* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
	Define HAVE_TERMIOS.
	* Various: Remove all use of TIOC*_BROKEN.
1993-06-30 22:20:53 +00:00

402 lines
7.3 KiB
C

/* Remote serial interface for local (hardwired) serial ports for GO32.
Copyright 1992, 1993 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "serial.h"
#include <sys/dos.h>
/* This is unused for now. We just return a placeholder. */
struct go32_ttystate
{
int bogus;
};
typedef struct {
short jmp_op;
short signature;
short version;
short buffer_start;
short buffer_end;
short getp;
short putp;
short iov;
} ASYNC_STRUCT;
static int go32_open PARAMS ((serial_t scb, const char *name));
static void go32_raw PARAMS ((serial_t scb));
static int wait_for PARAMS ((serial_t scb, int timeout));
static int go32_readchar PARAMS ((serial_t scb, int timeout));
static int rate_to_code PARAMS ((int rate));
static int go32_setbaudrate PARAMS ((serial_t scb, int rate));
static int go32_write PARAMS ((serial_t scb, const char *str, int len));
static void go32_restore PARAMS ((serial_t scb));
static void go32_close PARAMS ((serial_t scb));
static serial_ttystate go32_get_tty_state PARAMS ((serial_t scb));
static int go32_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
static int strncasecmp PARAMS ((const char *str1, const char *str2, int len));
static char *aptr PARAMS ((short p));
static ASYNC_STRUCT *getivec PARAMS ((int which));
static int dos_async_init PARAMS ((int port));
static void dos_async_tx PARAMS ((const char c));
static int dos_async_ready PARAMS (());
static int dos_async_rx PARAMS (());
static int dosasync_read PARAMS ((int fd, char *buf, int len, int timeout));
static int dosasync_write PARAMS ((int fd, const char *buf, int len));
#define SIGNATURE 0x4154
#define VERSION 1
#define OFFSET 0x104
#define peek(a,b) (*(unsigned short *)(0xe0000000 + (a)*16 + (b)))
static ASYNC_STRUCT *async;
static int iov;
#define com_rb iov
#define com_tb iov
#define com_ier iov+1
#define com_ifr iov+2
#define com_bfr iov+3
#define com_mcr iov+4
#define com_lsr iov+5
#define com_msr iov+6
static int
strncasecmp(str1, str2, len)
const char *str1, *str2;
register int len;
{
unsigned char c1, c2;
for (; len != 0; --len)
{
c1 = *str1++;
c2 = *str2++;
if (toupper(c1) != toupper(c2))
return toupper(c1) - toupper(c2);
if (c1 == '\0')
return 0;
}
return 0;
}
static char *
aptr(p)
short p;
{
return (char *)((unsigned)async - OFFSET + p);
}
static ASYNC_STRUCT *
getivec(int which)
{
ASYNC_STRUCT *a;
if (peek(0, which*4) != OFFSET)
return 0;
a = (ASYNC_STRUCT *)(0xe0000000 + peek(0, which*4+2)*16 + peek(0, which*4));
if (a->signature != SIGNATURE)
return 0;
if (a->version != VERSION)
return 0;
return a;
}
static int
dos_async_init(port)
int port;
{
int i;
switch (port)
{
case 1:
async = getivec (12);
break;
case 2:
async = getivec (11);
break;
default:
return 0;
}
if (!async)
{
error("GDB cannot connect to asynctsr program, check that it is installed\n\
and that serial I/O is not being redirected (perhaps by NFS)\n\n\
example configuration:\n\
C> mode com%d:9600,n,8,1,p\n\
C> asynctsr %d\n\
C> gdb \n", port, port);
}
iov = async->iov;
outportb(com_ier, 0x0f);
outportb(com_bfr, 0x03);
outportb(com_mcr, 0x0b);
async->getp = async->putp = async->buffer_start;
return 1;
}
static void
dos_async_tx(c)
const char c;
{
while (~inportb(com_lsr) & 0x20);
outportb(com_tb, c);
}
static int
dos_async_ready()
{
return (async->getp != async->putp);
}
static int
dos_async_rx()
{
char rv;
while (!dos_async_ready())
if (kbhit())
{
printf("abort!\n");
return 0;
}
rv = *aptr(async->getp++);
if (async->getp >= async->buffer_end)
async->getp = async->buffer_start;
return rv;
}
static int
dosasync_read (fd, buf, len, timeout)
int fd;
char *buf;
int len;
int timeout;
{
long now, then;
int l = len;
time (&now);
then = now + timeout;
while (l--)
{
if (timeout)
{
while (!dos_async_ready())
{
time (&now);
if (now >= then)
return len - l - 1;
}
}
*buf++ = dos_async_rx();
}
return len;
}
static int
dosasync_write(fd, buf, len)
int fd;
const char *buf;
int len;
{
int l = len;
while (l--)
dos_async_tx (*buf++);
return len;
}
static int
go32_open (scb, name)
serial_t scb;
const char *name;
{
int port;
if (strncasecmp (name, "com", 3) != 0)
{
errno = ENOENT;
return -1;
}
port = name[3] - '0';
if ((port != 1) && (port != 2))
{
errno = ENOENT;
return -11;
}
scb->fd = dos_async_init(port);
if (!scb->fd)
return -1;
return 0;
}
static int
go32_flush_output (scb)
serial_t scb;
{
/* No need to flush, because there is no buffering. */
return 0;
}
static void
go32_raw (scb)
serial_t scb;
{
/* Always in raw mode */
}
static int
go32_readchar (scb, timeout)
serial_t scb;
int timeout;
{
char buf;
if (dosasync_read(scb->fd, &buf, 1, timeout))
return buf;
else
return SERIAL_TIMEOUT;
}
/* go32_{get set}_tty_state() are both dummys to fill out the function
vector. Someday, they may do something real... */
static serial_ttystate
go32_get_tty_state(scb)
serial_t scb;
{
struct go32_ttystate *state;
state = (struct go32_ttystate *)xmalloc(sizeof *state);
return (serial_ttystate)state;
}
static int
go32_set_tty_state(scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
struct go32_ttystate *state;
return 0;
}
static int
go32_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
serial_t scb;
serial_ttystate new_ttystate;
serial_ttystate old_ttystate;
{
return 0;
}
static void
go32_print_tty_state (scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
/* Nothing to print. */
return;
}
static int
go32_setbaudrate (scb, rate)
serial_t scb;
int rate;
{
return 0;
}
static int
go32_set_process_group (scb, ttystate, group)
serial_t scb;
serial_ttystate ttystate;
int group;
{
return 0;
}
static int
go32_write (scb, str, len)
serial_t scb;
const char *str;
int len;
{
dosasync_write(scb->fd, str, len);
return 0;
}
static void
go32_close (scb)
serial_t scb;
{
}
static struct serial_ops go32_ops =
{
"hardwire",
0,
go32_open,
go32_close,
go32_readchar,
go32_write,
go32_flush_output,
go32_raw,
go32_get_tty_state,
go32_set_tty_state,
go32_print_tty_state,
go32_noflush_set_tty_state,
go32_setbaudrate,
go32_set_process_group
};
/* There is never job control on go32. */
int
gdb_setpgid ()
{
return 0;
}
_initialize_ser_go32 ()
{
job_control = 0;
serial_add_interface (&go32_ops);
}