old-cross-binutils/gdb/testsuite/lib/gdb.exp
Pedro Alves 0413d7389a gdb/testsuite/
* lib/gdb.exp (gdb_compile): Remove dead aix and irix related
	bits.
2009-10-08 22:42:53 +00:00

3047 lines
84 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Fred Fish. (fnf@cygnus.com)
# Generic gdb subroutines that should work for any target. If these
# need to be modified for any target, it can be done with a variable
# or by passing arguments.
if {$tool == ""} {
# Tests would fail, logs on get_compiler_info() would be missing.
send_error "`site.exp' not found, run `make site.exp'!\n"
exit 2
}
load_lib libgloss.exp
global GDB
if [info exists TOOL_EXECUTABLE] {
set GDB $TOOL_EXECUTABLE;
}
if ![info exists GDB] {
if ![is_remote host] {
set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]]
} else {
set GDB [transform gdb];
}
}
verbose "using GDB = $GDB" 2
# GDBFLAGS is available for the user to set on the command line.
# E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble
# Testcases may use it to add additional flags, but they must:
# - append new flags, not overwrite
# - restore the original value when done
global GDBFLAGS
if ![info exists GDBFLAGS] {
set GDBFLAGS ""
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
# INTERNAL_GDBFLAGS contains flags that the testsuite requires.
set INTERNAL_GDBFLAGS "-nw -nx"
# The variable gdb_prompt is a regexp which matches the gdb prompt.
# Set it if it is not already set.
global gdb_prompt
if ![info exists gdb_prompt] then {
set gdb_prompt "\[(\]gdb\[)\]"
}
# The variable fullname_syntax_POSIX is a regexp which matches a POSIX
# absolute path ie. /foo/
set fullname_syntax_POSIX {/[^\n]*/}
# The variable fullname_syntax_UNC is a regexp which matches a Windows
# UNC path ie. \\D\foo\
set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\}
# The variable fullname_syntax_DOS_CASE is a regexp which matches a
# particular DOS case that GDB most likely will output
# ie. \foo\, but don't match \\.*\
set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\}
# The variable fullname_syntax_DOS is a regexp which matches a DOS path
# ie. a:\foo\ && a:foo\
set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\}
# The variable fullname_syntax is a regexp which matches what GDB considers
# an absolute path. It is currently debatable if the Windows style paths
# d:foo and \abc should be considered valid as an absolute path.
# Also, the purpse of this regexp is not to recognize a well formed
# absolute path, but to say with certainty that a path is absolute.
set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)"
# Needed for some tests under Cygwin.
global EXEEXT
global env
if ![info exists env(EXEEXT)] {
set EXEEXT ""
} else {
set EXEEXT $env(EXEEXT)
}
set octal "\[0-7\]+"
### Only procedures should come after this point.
#
# gdb_version -- extract and print the version number of GDB
#
proc default_gdb_version {} {
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
set fileid [open "gdb_cmd" w];
puts $fileid "q";
close $fileid;
set cmdfile [remote_download host "gdb_cmd"];
set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --command $cmdfile"]
remote_file build delete "gdb_cmd";
remote_file host delete "$cmdfile";
set tmp [lindex $output 1];
set version ""
regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version
if ![is_remote host] {
clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n"
} else {
clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n"
}
}
proc gdb_version { } {
return [default_gdb_version];
}
#
# gdb_unload -- unload a file if one is loaded
#
proc gdb_unload {} {
global verbose
global GDB
global gdb_prompt
send_gdb "file\n"
gdb_expect 60 {
-re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "A program is being debugged already..*Kill it.*y or n. $"\
{ send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "Discard symbol table from .*y or n.*$" {
send_gdb "y\n"
exp_continue
}
-re "$gdb_prompt $" {}
timeout {
perror "couldn't unload file in $GDB (timed out)."
return -1
}
}
}
# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached. At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
proc delete_breakpoints {} {
global gdb_prompt
# we need a larger timeout value here or this thing just confuses
# itself. May need a better implementation if possible. - guo
#
send_gdb "delete breakpoints\n"
gdb_expect 100 {
-re "Delete all breakpoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
}
-re "$gdb_prompt $" { # This happens if there were no breakpoints
}
timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return }
}
send_gdb "info breakpoints\n"
gdb_expect 100 {
-re "No breakpoints or watchpoints..*$gdb_prompt $" {}
-re "$gdb_prompt $" { perror "breakpoints not deleted" ; return }
-re "Delete all breakpoints.*or n.*$" {
send_gdb "y\n";
exp_continue
}
timeout { perror "info breakpoints (timeout)" ; return }
}
}
#
# Generic run command.
#
# The second pattern below matches up to the first newline *only*.
# Using ``.*$'' could swallow up output that we attempt to match
# elsewhere.
#
proc gdb_run_cmd {args} {
global gdb_prompt
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
send_gdb "continue\n";
gdb_expect 60 {
-re "Continu\[^\r\n\]*\[\r\n\]" {}
default {}
}
return;
}
if [target_info exists gdb,start_symbol] {
set start [target_info gdb,start_symbol];
} else {
set start "start";
}
send_gdb "jump *$start\n"
set start_attempt 1;
while { $start_attempt } {
# Cap (re)start attempts at three to ensure that this loop
# always eventually fails. Don't worry about trying to be
# clever and not send a command when it has failed.
if [expr $start_attempt > 3] {
perror "Jump to start() failed (retry count exceeded)";
return;
}
set start_attempt [expr $start_attempt + 1];
gdb_expect 30 {
-re "Continuing at \[^\r\n\]*\[\r\n\]" {
set start_attempt 0;
}
-re "No symbol \"_start\" in current.*$gdb_prompt $" {
perror "Can't find start symbol to run in gdb_run";
return;
}
-re "No symbol \"start\" in current.*$gdb_prompt $" {
send_gdb "jump *_start\n";
}
-re "No symbol.*context.*$gdb_prompt $" {
set start_attempt 0;
}
-re "Line.* Jump anyway.*y or n. $" {
send_gdb "y\n"
}
-re "The program is not being run.*$gdb_prompt $" {
if { [gdb_reload] != 0 } {
return;
}
send_gdb "jump *$start\n";
}
timeout {
perror "Jump to start() failed (timeout)";
return
}
}
}
if [target_info exists gdb_stub] {
gdb_expect 60 {
-re "$gdb_prompt $" {
send_gdb "continue\n"
}
}
}
return
}
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
}
send_gdb "run $args\n"
# This doesn't work quite right yet.
# Use -notransfer here so that test cases (like chng-sym.exp)
# may test for additional start-up messages.
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
-notransfer -re "Starting program: \[^\r\n\]*" {}
}
}
# Generic start command. Return 0 if we could start the program, -1
# if we could not.
proc gdb_start_cmd {args} {
global gdb_prompt
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
if [target_info exists use_gdb_stub] {
return -1
}
send_gdb "start $args\n"
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
# Use -notransfer here so that test cases (like chng-sym.exp)
# may test for additional start-up messages.
-notransfer -re "Starting program: \[^\r\n\]*" {
return 0
}
}
return -1
}
# Set a breakpoint at FUNCTION. If there is an additional argument it is
# a list of options; the supported options are allow-pending, temporary,
# and no-message.
proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
set pending_response n
if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
set pending_response y
}
set break_command "break"
set break_message "Breakpoint"
if {[lsearch -exact [lindex $args 0] temporary] != -1} {
set break_command "tbreak"
set break_message "Temporary breakpoint"
}
set no_message 0
if {[lsearch -exact [lindex $args 0] no-message] != -1} {
set no_message 1
}
send_gdb "$break_command $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
-re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "$break_message \[0-9\]* at .*$gdb_prompt $" {}
-re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
if {$pending_response == "n"} {
if { $no_message == 0 } {
fail "setting breakpoint at $function"
}
return 0
}
}
-re "Make breakpoint pending.*y or \\\[n\\\]. $" {
send_gdb "$pending_response\n"
exp_continue
}
-re "$gdb_prompt $" {
if { $no_message == 0 } {
fail "setting breakpoint at $function"
}
return 0
}
timeout {
if { $no_message == 0 } {
fail "setting breakpoint at $function (timeout)"
}
return 0
}
}
return 1;
}
# Set breakpoint at function and run gdb until it breaks there.
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
# single quoted C++ function specifier. If there's an additional argument,
# pass it to gdb_breakpoint.
proc runto { function args } {
global gdb_prompt
global decimal
delete_breakpoints
if ![gdb_breakpoint $function [lindex $args 0]] {
return 0;
}
gdb_run_cmd
# the "at foo.c:36" output we get with -g.
# the "in func" output we get without -g.
gdb_expect 30 {
-re "Break.* at .*:$decimal.*$gdb_prompt $" {
return 1
}
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
return 1
}
-re "$gdb_prompt $" {
fail "running to $function in runto"
return 0
}
eof {
fail "running to $function in runto (end of file)"
return 0
}
timeout {
fail "running to $function in runto (timeout)"
return 0
}
}
return 1
}
#
# runto_main -- ask gdb to run until we hit a breakpoint at main.
# The case where the target uses stubs has to be handled
# specially--if it uses stubs, assuming we hit
# breakpoint() and just step out of the function.
#
proc runto_main { } {
global gdb_prompt
global decimal
if ![target_info exists gdb_stub] {
return [runto main]
}
delete_breakpoints
gdb_step_for_stub;
return 1
}
### Continue, and expect to hit a breakpoint.
### Report a pass or fail, depending on whether it seems to have
### worked. Use NAME as part of the test name; each call to
### continue_to_breakpoint should use a NAME which is unique within
### that test file.
proc gdb_continue_to_breakpoint {name {location_pattern .*}} {
global gdb_prompt
set full_name "continue to breakpoint: $name"
send_gdb "continue\n"
gdb_expect {
-re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
fail $full_name
}
timeout {
fail "$full_name (timeout)"
}
}
}
# gdb_internal_error_resync:
#
# Answer the questions GDB asks after it reports an internal error
# until we get back to a GDB prompt. Decline to quit the debugging
# session, and decline to create a core file. Return non-zero if the
# resync succeeds.
#
# This procedure just answers whatever questions come up until it sees
# a GDB prompt; it doesn't require you to have matched the input up to
# any specific point. However, it only answers questions it sees in
# the output itself, so if you've matched a question, you had better
# answer it yourself before calling this.
#
# You can use this function thus:
#
# gdb_expect {
# ...
# -re ".*A problem internal to GDB has been detected" {
# gdb_internal_error_resync
# }
# ...
# }
#
proc gdb_internal_error_resync {} {
global gdb_prompt
set count 0
while {$count < 10} {
gdb_expect {
-re "Quit this debugging session\\? \\(y or n\\) $" {
send_gdb "n\n"
incr count
}
-re "Create a core file of GDB\\? \\(y or n\\) $" {
send_gdb "n\n"
incr count
}
-re "$gdb_prompt $" {
# We're resynchronized.
return 1
}
timeout {
perror "Could not resync from internal error (timeout)"
return 0
}
}
}
perror "Could not resync from internal error (resync count exceeded)"
return 0
}
# gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS
# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# MESSAGE is a message to be printed with the built-in failure patterns
# if one of them matches. If MESSAGE is empty COMMAND will be used.
# EXPECT_ARGUMENTS will be fed to expect in addition to the standard
# patterns. Pattern elements will be evaluated in the caller's
# context; action elements will be executed in the caller's context.
# Unlike patterns for gdb_test, these patterns should generally include
# the final newline and prompt.
#
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
#
# You can use this function thus:
#
# gdb_test_multiple "print foo" "test foo" {
# -re "expected output 1" {
# pass "print foo"
# }
# -re "expected output 2" {
# fail "print foo"
# }
# }
#
# The standard patterns, such as "Program exited..." and "A problem
# ...", all being implicitly appended to that list.
#
proc gdb_test_multiple { command message user_code } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
upvar expect_out expect_out
if { $message == "" } {
set message $command
}
# TCL/EXPECT WART ALERT
# Expect does something very strange when it receives a single braced
# argument. It splits it along word separators and performs substitutions.
# This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is
# evaluated as "\[ab\]". But that's not how TCL normally works; inside a
# double-quoted list item, "\[ab\]" is just a long way of representing
# "[ab]", because the backslashes will be removed by lindex.
# Unfortunately, there appears to be no easy way to duplicate the splitting
# that expect will do from within TCL. And many places make use of the
# "\[0-9\]" construct, so we need to support that; and some places make use
# of the "[func]" construct, so we need to support that too. In order to
# get this right we have to substitute quoted list elements differently
# from braced list elements.
# We do this roughly the same way that Expect does it. We have to use two
# lists, because if we leave unquoted newlines in the argument to uplevel
# they'll be treated as command separators, and if we escape newlines
# we mangle newlines inside of command blocks. This assumes that the
# input doesn't contain a pattern which contains actual embedded newlines
# at this point!
regsub -all {\n} ${user_code} { } subst_code
set subst_code [uplevel list $subst_code]
set processed_code ""
set patterns ""
set expecting_action 0
foreach item $user_code subst_item $subst_code {
if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } {
lappend processed_code $item
continue
}
if {$item == "-indices" || $item == "-re" || $item == "-ex"} {
lappend processed_code $item
continue
}
if { $expecting_action } {
lappend processed_code "uplevel [list $item]"
set expecting_action 0
# Cosmetic, no effect on the list.
append processed_code "\n"
continue
}
set expecting_action 1
lappend processed_code $subst_item
if {$patterns != ""} {
append patterns "; "
}
append patterns "\"$subst_item\""
}
# Also purely cosmetic.
regsub -all {\r} $patterns {\\r} patterns
regsub -all {\n} $patterns {\\n} patterns
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
send_user "Looking to match \"$patterns\"\n"
send_user "Message is \"$message\"\n"
}
set result -1
set string "${command}\n";
if { $command != "" } {
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
if { $foo < [expr $len - 1] } {
set str [string range "$string" 0 $foo];
if { [send_gdb "$str"] != "" } {
global suppress_flag;
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
# since we're checking if each line of the multi-line
# command are 'accepted' by GDB here,
# we need to set -notransfer expect option so that
# command output is not lost for pattern matching
# - guo
gdb_expect 2 {
-notransfer -re "\[\r\n\]" { verbose "partial: match" 3 }
timeout { verbose "partial: timeout" 3 }
}
set string [string range "$string" [expr $foo + 1] end];
} else {
break;
}
}
if { "$string" != "" } {
if { [send_gdb "$string"] != "" } {
global suppress_flag;
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
}
}
if [target_info exists gdb,timeout] {
set tmt [target_info gdb,timeout];
} else {
if [info exists timeout] {
set tmt $timeout;
} else {
global timeout;
if [info exists timeout] {
set tmt $timeout;
} else {
set tmt 60;
}
}
}
set code {
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_internal_error_resync
}
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
set result -1;
}
}
append code $processed_code
append code {
-re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_exit
gdb_start
set result -1
}
-re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
fail "$message"
set result 1
}
-re "Ambiguous command.*$gdb_prompt $" {
perror "\"$command\" is not a unique command name."
fail "$message"
set result 1
}
-re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
set errmsg "$command (the program exited)"
}
fail "$errmsg"
set result -1
}
-re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
set errmsg "$command (the program exited)"
}
fail "$errmsg"
set result -1
}
-re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program is no longer running)"
} else {
set errmsg "$command (the program is no longer running)"
}
fail "$errmsg"
set result -1
}
-re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
"<return>" {
send_gdb "\n"
perror "Window too small."
fail "$message"
set result -1
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
fail "$message"
set result -1
}
eof {
perror "Process no longer exists"
if { $message != "" } {
fail "$message"
}
return -1
}
full_buffer {
perror "internal buffer is full."
fail "$message"
set result -1
}
timeout {
if ![string match "" $message] then {
fail "$message (timeout)"
}
set result 1
}
}
set result 0
set code [catch {gdb_expect $tmt $code} string]
if {$code == 1} {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
} elseif {$code == 2} {
return -code return $string
} elseif {$code == 3} {
return
} elseif {$code > 4} {
return -code $code $string
}
return $result
}
# gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
# the \r\n sequence immediately before the gdb prompt.
# MESSAGE is an optional message to be printed. If this is
# omitted, then the pass/fail messages use the command string as the
# message. (If this is the empty string, then sometimes we don't
# call pass or fail at all; I don't understand this at all.)
# QUESTION is a question GDB may ask in response to COMMAND, like
# "are you sure?"
# RESPONSE is the response to send if QUESTION appears.
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc gdb_test { args } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
if [llength $args]>2 then {
set message [lindex $args 2]
} else {
set message [lindex $args 0]
}
set command [lindex $args 0]
set pattern [lindex $args 1]
if [llength $args]==5 {
set question_string [lindex $args 3];
set response_string [lindex $args 4];
} else {
set question_string "^FOOBAR$"
}
return [gdb_test_multiple $command $message {
-re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
if ![string match "" $message] then {
pass "$message"
}
}
-re "(${question_string})$" {
send_gdb "$response_string\n";
exp_continue;
}
}]
}
# Test that a command gives an error. For pass or fail, return
# a 1 to indicate that more tests can proceed. However a timeout
# is a serious error, generates a special fail message, and causes
# a 0 to be returned to indicate that more tests are likely to fail
# as well.
proc test_print_reject { args } {
global gdb_prompt
global verbose
if [llength $args]==2 then {
set expectthis [lindex $args 1]
} else {
set expectthis "should never match this bogus string"
}
set sendthis [lindex $args 0]
if $verbose>2 then {
send_user "Sending \"$sendthis\" to gdb\n"
send_user "Looking to match \"$expectthis\"\n"
}
send_gdb "$sendthis\n"
#FIXME: Should add timeout as parameter.
gdb_expect {
-re "A .* in expression.*\\.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid syntax in expression.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Junk after end of expression.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid number.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid character constant.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "No symbol table is loaded.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "No symbol .* in current context.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Unmatched single quote.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "A character constant must contain at least one character.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "$expectthis.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re ".*$gdb_prompt $" {
fail "reject $sendthis"
return 1
}
default {
fail "reject $sendthis (eof or timeout)"
return 0
}
}
}
# Given an input string, adds backslashes as needed to create a
# regexp that will match the string.
proc string_to_regexp {str} {
set result $str
regsub -all {[]*+.|()^$\[\\]} $str {\\&} result
return $result
}
# Same as gdb_test, but the second parameter is not a regexp,
# but a string that must match exactly.
proc gdb_test_exact { args } {
upvar timeout timeout
set command [lindex $args 0]
# This applies a special meaning to a null string pattern. Without
# this, "$pattern\r\n$gdb_prompt $" will match anything, including error
# messages from commands that should have no output except a new
# prompt. With this, only results of a null string will match a null
# string pattern.
set pattern [lindex $args 1]
if [string match $pattern ""] {
set pattern [string_to_regexp [lindex $args 0]]
} else {
set pattern [string_to_regexp [lindex $args 1]]
}
# It is most natural to write the pattern argument with only
# embedded \n's, especially if you are trying to avoid Tcl quoting
# problems. But gdb_expect really wants to see \r\n in patterns. So
# transform the pattern here. First transform \r\n back to \n, in
# case some users of gdb_test_exact already do the right thing.
regsub -all "\r\n" $pattern "\n" pattern
regsub -all "\n" $pattern "\r\n" pattern
if [llength $args]==3 then {
set message [lindex $args 2]
} else {
set message $command
}
return [gdb_test $command $pattern $message]
}
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
if [is_remote host] {
return "";
}
send_gdb "dir\n"
gdb_expect 60 {
-re "Reinitialize source path to empty.*y or n. " {
send_gdb "y\n"
gdb_expect 60 {
-re "Source directories searched.*$gdb_prompt $" {
send_gdb "dir $subdir\n"
gdb_expect 60 {
-re "Source directories searched.*$gdb_prompt $" {
verbose "Dir set to $subdir"
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
#
# gdb_exit -- exit the GDB, killing the target program if necessary
#
proc default_gdb_exit {} {
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global verbose
global gdb_spawn_id;
gdb_stop_suppressing_tests;
if ![info exists gdb_spawn_id] {
return;
}
verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "quit\n";
gdb_expect 10 {
-re "y or n" {
send_gdb "y\n";
exp_continue;
}
-re "DOSEXIT code" { }
default { }
}
}
if ![is_remote host] {
remote_close host;
}
unset gdb_spawn_id
}
# Load a file into the debugger.
# The return value is 0 for success, -1 for failure.
#
# This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO
# to one of these values:
#
# debug file was loaded successfully and has debug information
# nodebug file was loaded successfully and has no debug information
# fail file was not loaded
#
# I tried returning this information as part of the return value,
# but ran into a mess because of the many re-implementations of
# gdb_load in config/*.exp.
#
# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use
# this if they can get more information set.
proc gdb_file_cmd { arg } {
global gdb_prompt
global verbose
global GDB
global last_loaded_file
set last_loaded_file $arg
# Set whether debug info was found.
# Default to "fail".
global gdb_file_cmd_debug_info
set gdb_file_cmd_debug_info "fail"
if [is_remote host] {
set arg [remote_download host $arg]
if { $arg == "" } {
perror "download failed"
return -1
}
}
# The file command used to kill the remote target. For the benefit
# of the testsuite, preserve this behavior.
send_gdb "kill\n"
gdb_expect 120 {
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "$gdb_prompt $" {
# OK.
}
}
send_gdb "file $arg\n"
gdb_expect 120 {
-re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
set gdb_file_cmd_debug_info "nodebug"
return 0
}
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
return -1
}
}
}
-re "No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory"
return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
}
#
# start gdb -- start gdb running, default procedure
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow. Give gdb at least 3 minutes to start up.
#
proc default_gdb_start { } {
global verbose
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
global timeout
global gdb_spawn_id;
global env
gdb_stop_suppressing_tests;
set env(LC_CTYPE) C
# Don't let a .inputrc file or an existing setting of INPUTRC mess up
# the test results. Even if /dev/null doesn't exist on the particular
# platform, the readline library will use the default setting just by
# failing to open the file. OTOH, opening /dev/null successfully will
# also result in the default settings being used since nothing will be
# read from this file.
set env(INPUTRC) "/dev/null"
# The gdb.base/readline.exp arrow key test relies on the standard VT100
# bindings, so make sure that an appropriate terminal is selected.
# The same bug doesn't show up if we use ^P / ^N instead.
set env(TERM) "vt100"
verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
if [info exists gdb_spawn_id] {
return 0;
}
if ![is_remote host] {
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
}
set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
}
gdb_expect 360 {
-re "\[\r\n\]$gdb_prompt $" {
verbose "GDB initialized."
}
-re "$gdb_prompt $" {
perror "GDB never initialized."
return -1
}
timeout {
perror "(timeout) GDB never initialized after 10 seconds."
remote_close host;
return -1
}
}
set gdb_spawn_id -1;
# force the height to "unlimited", so no pagers get used
send_gdb "set height 0\n"
gdb_expect 10 {
-re "$gdb_prompt $" {
verbose "Setting height to 0." 2
}
timeout {
warning "Couldn't set the height to 0"
}
}
# force the width to "unlimited", so no wraparound occurs
send_gdb "set width 0\n"
gdb_expect 10 {
-re "$gdb_prompt $" {
verbose "Setting width to 0." 2
}
timeout {
warning "Couldn't set the width to 0."
}
}
return 0;
}
# Return a 1 for configurations for which we don't even want to try to
# test C++.
proc skip_cplus_tests {} {
if { [istarget "h8300-*-*"] } {
return 1
}
# The C++ IO streams are too large for HC11/HC12 and are thus not
# available. The gdb C++ tests use them and don't compile.
if { [istarget "m6811-*-*"] } {
return 1
}
if { [istarget "m6812-*-*"] } {
return 1
}
return 0
}
# Return a 1 if I don't even want to try to test FORTRAN.
proc skip_fortran_tests {} {
return 0
}
# Return a 1 if we should skip shared library tests.
proc skip_shlib_tests {} {
# Run the shared library tests on native systems.
if {[isnative]} {
return 0
}
# An abbreviated list of remote targets where we should be able to
# run shared library tests.
if {([istarget *-*-linux*]
|| [istarget *-*-*bsd*]
|| [istarget *-*-solaris2*]
|| [istarget arm*-*-symbianelf*]
|| [istarget *-*-mingw*]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
return 0
}
return 1
}
# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
proc skip_altivec_tests {} {
global skip_vmx_tests_saved
global srcdir subdir gdb_prompt
# Use the cached value, if it exists.
set me "skip_altivec_tests"
if [info exists skip_vmx_tests_saved] {
verbose "$me: returning saved $skip_vmx_tests_saved" 2
return $skip_vmx_tests_saved
}
# Some simulators are known to not support VMX instructions.
if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } {
verbose "$me: target known to not support VMX, returning 1" 2
return [set skip_vmx_tests_saved 1]
}
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings}
if [get_compiler_info not-used] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
set compile_flags "$compile_flags additional_flags=-maltivec"
} elseif [test_compiler_info xlc*] {
set compile_flags "$compile_flags additional_flags=-qaltivec"
} else {
verbose "Could not compile with altivec support, returning 1" 2
return 1
}
# Set up, compile, and execute a test program containing VMX instructions.
# Include the current process ID in the file names to prevent conflicts
# with invocations for multiple testsuites.
set src vmx[pid].c
set exe vmx[pid].x
set f [open $src "w"]
puts $f "int main() {"
puts $f "#ifdef __MACH__"
puts $f " asm volatile (\"vor v0,v0,v0\");"
puts $f "#else"
puts $f " asm volatile (\"vor 0,0,0\");"
puts $f "#endif"
puts $f " return 0; }"
close $f
verbose "$me: compiling testfile $src" 2
set lines [gdb_compile $src $exe executable $compile_flags]
file delete $src
if ![string match "" $lines] then {
verbose "$me: testfile compilation failed, returning 1" 2
return [set skip_vmx_tests_saved 1]
}
# No error message, compilation succeeded so now run it via gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load "$exe"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
verbose -log "\n$me altivec hardware not detected"
set skip_vmx_tests_saved 1
}
-re ".*Program exited normally.*${gdb_prompt} $" {
verbose -log "\n$me: altivec hardware detected"
set skip_vmx_tests_saved 0
}
default {
warning "\n$me: default case taken"
set skip_vmx_tests_saved 1
}
}
gdb_exit
remote_file build delete $exe
verbose "$me: returning $skip_vmx_tests_saved" 2
return $skip_vmx_tests_saved
}
# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
proc skip_vsx_tests {} {
global skip_vsx_tests_saved
global srcdir subdir gdb_prompt
# Use the cached value, if it exists.
set me "skip_vsx_tests"
if [info exists skip_vsx_tests_saved] {
verbose "$me: returning saved $skip_vsx_tests_saved" 2
return $skip_vsx_tests_saved
}
# Some simulators are known to not support Altivec instructions, so
# they won't support VSX instructions as well.
if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } {
verbose "$me: target known to not support VSX, returning 1" 2
return [set skip_vsx_tests_saved 1]
}
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings quiet}
if [get_compiler_info not-used] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
set compile_flags "$compile_flags additional_flags=-mvsx"
} elseif [test_compiler_info xlc*] {
set compile_flags "$compile_flags additional_flags=-qvsx"
} else {
verbose "Could not compile with vsx support, returning 1" 2
return 1
}
set src vsx[pid].c
set exe vsx[pid].x
set f [open $src "w"]
puts $f "int main() {"
puts $f "#ifdef __MACH__"
puts $f " asm volatile (\"lxvd2x v0,v0,v0\");"
puts $f "#else"
puts $f " asm volatile (\"lxvd2x 0,0,0\");"
puts $f "#endif"
puts $f " return 0; }"
close $f
verbose "$me: compiling testfile $src" 2
set lines [gdb_compile $src $exe executable $compile_flags]
file delete $src
if ![string match "" $lines] then {
verbose "$me: testfile compilation failed, returning 1" 2
return [set skip_vsx_tests_saved 1]
}
# No error message, compilation succeeded so now run it via gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load "$exe"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
verbose -log "\n$me VSX hardware not detected"
set skip_vsx_tests_saved 1
}
-re ".*Program exited normally.*${gdb_prompt} $" {
verbose -log "\n$me: VSX hardware detected"
set skip_vsx_tests_saved 0
}
default {
warning "\n$me: default case taken"
set skip_vsx_tests_saved 1
}
}
gdb_exit
remote_file build delete $exe
verbose "$me: returning $skip_vsx_tests_saved" 2
return $skip_vsx_tests_saved
}
# Skip all the tests in the file if you are not on an hppa running
# hpux target.
proc skip_hp_tests {} {
eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
verbose "Skip hp tests is $skip_hp"
return $skip_hp
}
# Return whether we should skip tests for showing inlined functions in
# backtraces. Requires get_compiler_info and get_debug_format.
proc skip_inline_frame_tests {} {
# GDB only recognizes inlining information in DWARF 2 (DWARF 3).
if { ! [test_debug_format "DWARF 2"] } {
return 1
}
# GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line.
if { ([test_compiler_info "gcc-2-*"]
|| [test_compiler_info "gcc-3-*"]
|| [test_compiler_info "gcc-4-0-*"]) } {
return 1
}
return 0
}
# Return whether we should skip tests for showing variables from
# inlined functions. Requires get_compiler_info and get_debug_format.
proc skip_inline_var_tests {} {
# GDB only recognizes inlining information in DWARF 2 (DWARF 3).
if { ! [test_debug_format "DWARF 2"] } {
return 1
}
return 0
}
set compiler_info "unknown"
set gcc_compiled 0
set hp_cc_compiler 0
set hp_aCC_compiler 0
# Figure out what compiler I am using.
#
# BINFILE is a "compiler information" output file. This implementation
# does not use BINFILE.
#
# ARGS can be empty or "C++". If empty, "C" is assumed.
#
# There are several ways to do this, with various problems.
#
# [ gdb_compile -E $ifile -o $binfile.ci ]
# source $binfile.ci
#
# Single Unix Spec v3 says that "-E -o ..." together are not
# specified. And in fact, the native compiler on hp-ux 11 (among
# others) does not work with "-E -o ...". Most targets used to do
# this, and it mostly worked, because it works with gcc.
#
# [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ]
# source $binfile.ci
#
# This avoids the problem with -E and -o together. This almost works
# if the build machine is the same as the host machine, which is
# usually true of the targets which are not gcc. But this code does
# not figure which compiler to call, and it always ends up using the C
# compiler. Not good for setting hp_aCC_compiler. Targets
# hppa*-*-hpux* and mips*-*-irix* used to do this.
#
# [ gdb_compile -E $ifile > $binfile.ci ]
# source $binfile.ci
#
# dejagnu target_compile says that it supports output redirection,
# but the code is completely different from the normal path and I
# don't want to sweep the mines from that path. So I didn't even try
# this.
#
# set cppout [ gdb_compile $ifile "" preprocess $args quiet ]
# eval $cppout
#
# I actually do this for all targets now. gdb_compile runs the right
# compiler, and TCL captures the output, and I eval the output.
#
# Unfortunately, expect logs the output of the command as it goes by,
# and dejagnu helpfully prints a second copy of it right afterwards.
# So I turn off expect logging for a moment.
#
# [ gdb_compile $ifile $ciexe_file executable $args ]
# [ remote_exec $ciexe_file ]
# [ source $ci_file.out ]
#
# I could give up on -E and just do this.
# I didn't get desperate enough to try this.
#
# -- chastain 2004-01-06
proc get_compiler_info {binfile args} {
# For compiler.c and compiler.cc
global srcdir
# I am going to play with the log to keep noise out.
global outdir
global tool
# These come from compiler.c or compiler.cc
global compiler_info
# Legacy global data symbols.
global gcc_compiled
global hp_cc_compiler
global hp_aCC_compiler
# Choose which file to preprocess.
set ifile "${srcdir}/lib/compiler.c"
if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
set ifile "${srcdir}/lib/compiler.cc"
}
# Run $ifile through the right preprocessor.
# Toggle gdb.log to keep the compiler output out of the log.
log_file
if [is_remote host] {
# We have to use -E and -o together, despite the comments
# above, because of how DejaGnu handles remote host testing.
set ppout "$outdir/compiler.i"
gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet]
set file [open $ppout r]
set cppout [read $file]
close $file
} else {
set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
}
log_file -a "$outdir/$tool.log"
# Eval the output.
set unknown 0
foreach cppline [ split "$cppout" "\n" ] {
if { [ regexp "^#" "$cppline" ] } {
# line marker
} elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } {
# blank line
} elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } {
# eval this line
verbose "get_compiler_info: $cppline" 2
eval "$cppline"
} else {
# unknown line
verbose -log "get_compiler_info: $cppline"
set unknown 1
}
}
# Reset to unknown compiler if any diagnostics happened.
if { $unknown } {
set compiler_info "unknown"
}
# Set the legacy symbols.
set gcc_compiled 0
set hp_cc_compiler 0
set hp_aCC_compiler 0
if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 }
if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 }
if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 }
if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 }
if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 }
if { [regexp "^hpcc-" "$compiler_info" ] } { set hp_cc_compiler 1 }
if { [regexp "^hpacc-" "$compiler_info" ] } { set hp_aCC_compiler 1 }
# Log what happened.
verbose -log "get_compiler_info: $compiler_info"
# Most compilers will evaluate comparisons and other boolean
# operations to 0 or 1.
uplevel \#0 { set true 1 }
uplevel \#0 { set false 0 }
# Use of aCC results in boolean results being displayed as
# "true" or "false"
if { $hp_aCC_compiler } {
uplevel \#0 { set true true }
uplevel \#0 { set false false }
}
return 0;
}
proc test_compiler_info { {compiler ""} } {
global compiler_info
# if no arg, return the compiler_info string
if [string match "" $compiler] {
if [info exists compiler_info] {
return $compiler_info
} else {
perror "No compiler info found."
}
}
return [string match $compiler $compiler_info]
}
set gdb_wrapper_initialized 0
proc gdb_wrapper_init { args } {
global gdb_wrapper_initialized;
global gdb_wrapper_file;
global gdb_wrapper_flags;
if { $gdb_wrapper_initialized == 1 } { return; }
if {[target_info exists needs_status_wrapper] && \
[target_info needs_status_wrapper] != "0"} {
set result [build_wrapper "testglue.o"];
if { $result != "" } {
set gdb_wrapper_file [lindex $result 0];
set gdb_wrapper_flags [lindex $result 1];
} else {
warning "Status wrapper failed to build."
}
}
set gdb_wrapper_initialized 1
}
# Some targets need to always link a special object in. Save its path here.
global gdb_saved_set_unbuffered_mode_obj
set gdb_saved_set_unbuffered_mode_obj ""
proc gdb_compile {source dest type options} {
global GDB_TESTCASE_OPTIONS;
global gdb_wrapper_file;
global gdb_wrapper_flags;
global gdb_wrapper_initialized;
global srcdir
global objdir
global gdb_saved_set_unbuffered_mode_obj
set outdir [file dirname $dest]
# Add platform-specific options if a shared library was specified using
# "shlib=librarypath" in OPTIONS.
set new_options ""
set shlib_found 0
foreach opt $options {
if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
if [test_compiler_info "xlc-*"] {
# IBM xlc compiler doesn't accept shared library named other
# than .so: use "-Wl," to bypass this
lappend source "-Wl,$shlib_name"
} elseif { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend source "${shlib_name}.a"
} else {
lappend source $shlib_name
}
if { $shlib_found == 0 } {
set shlib_found 1
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]) } {
lappend new_options "additional_flags=-Wl,--enable-auto-import"
}
}
} elseif { $opt == "shlib_load" } {
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*]
|| [istarget arm*-*-symbianelf*]
|| [istarget hppa*-*-hpux*])} {
# Do not need anything.
} elseif { [istarget *-*-openbsd*] } {
lappend new_options "additional_flags=-Wl,-rpath,${outdir}"
} else {
lappend new_options "libs=-ldl"
lappend new_options "additional_flags=-Wl,-rpath,\\\$ORIGIN"
}
} else {
lappend new_options $opt
}
}
set options $new_options
if [target_info exists gdb_stub] {
set options2 { "additional_flags=-Dusestubs" }
lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [target_info exists is_vxworks] {
set options2 { "additional_flags=-Dvxworks" }
lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [info exists GDB_TESTCASE_OPTIONS] {
lappend options "additional_flags=$GDB_TESTCASE_OPTIONS";
}
verbose "options are $options"
verbose "source is $source $dest $type $options"
if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init }
if {[target_info exists needs_status_wrapper] && \
[target_info needs_status_wrapper] != "0" && \
[info exists gdb_wrapper_file]} {
lappend options "libs=${gdb_wrapper_file}"
lappend options "ldflags=${gdb_wrapper_flags}"
}
# Replace the "nowarnings" option with the appropriate additional_flags
# to disable compiler warnings.
set nowarnings [lsearch -exact $options nowarnings]
if {$nowarnings != -1} {
if [target_info exists gdb,nowarnings_flag] {
set flag "additional_flags=[target_info gdb,nowarnings_flag]"
} else {
set flag "additional_flags=-w"
}
set options [lreplace $options $nowarnings $nowarnings $flag]
}
if { $type == "executable" } {
if { ([istarget "*-*-mingw*"]
|| [istarget "*-*-*djgpp"]
|| [istarget "*-*-cygwin*"])} {
# Force output to unbuffered mode, by linking in an object file
# with a global contructor that calls setvbuf.
#
# Compile the special object seperatelly for two reasons:
# 1) Insulate it from $options.
# 2) Avoid compiling it for every gdb_compile invocation,
# which is time consuming, especially if we're remote
# host testing.
#
if { $gdb_saved_set_unbuffered_mode_obj == "" } {
verbose "compiling gdb_saved_set_unbuffered_obj"
set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c
set unbuf_obj ${objdir}/set_unbuffered_mode.o
set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}]
if { $result != "" } {
return $result
}
set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o
# Link a copy of the output object, because the
# original may be automatically deleted.
remote_exec host "cp -f $unbuf_obj $gdb_saved_set_unbuffered_mode_obj"
} else {
verbose "gdb_saved_set_unbuffered_obj already compiled"
}
# Rely on the internal knowledge that the global ctors are ran in
# reverse link order. In that case, we can use ldflags to
# avoid copying the object file to the host multiple
# times.
# This object can only be added if standard libraries are
# used. Thus, we need to disable it if -nostdlib option is used
if {[lsearch -regexp $options "-nostdlib"] < 0 } {
lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj"
}
}
}
set result [target_compile $source $dest $type $options];
# Prune uninteresting compiler (and linker) output.
regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
if { $result != "" && [lsearch $options quiet] == -1} {
clone_output "gdb compile failed, $result"
}
return $result;
}
# This is just like gdb_compile, above, except that it tries compiling
# against several different thread libraries, to see which one this
# system has.
proc gdb_compile_pthreads {source dest type options} {
set built_binfile 0
set why_msg "unrecognized error"
foreach lib {-lpthreads -lpthread -lthread} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
set options_with_lib [concat $options [list libs=$lib quiet]]
set ccout [gdb_compile $source $dest $type $options_with_lib]
switch -regexp -- $ccout {
".*no posix threads support.*" {
set why_msg "missing threads include file"
break
}
".*cannot open -lpthread.*" {
set why_msg "missing runtime threads library"
}
".*Can't find library for -lpthread.*" {
set why_msg "missing runtime threads library"
}
{^$} {
pass "successfully compiled posix threads test case"
set built_binfile 1
break
}
}
}
if {!$built_binfile} {
unsupported "Couldn't compile $source: ${why_msg}"
return -1
}
}
# Build a shared library from SOURCES. You must use get_compiler_info
# first.
proc gdb_compile_shlib {sources dest options} {
set obj_options $options
switch -glob [test_compiler_info] {
"xlc-*" {
lappend obj_options "additional_flags=-qpic"
}
"gcc-*" {
if { !([istarget "powerpc*-*-aix*"]
|| [istarget "rs6000*-*-aix*"]
|| [istarget "*-*-cygwin*"]
|| [istarget "*-*-mingw*"]
|| [istarget "*-*-pe*"]) } {
lappend obj_options "additional_flags=-fpic"
}
}
default {
switch -glob [istarget] {
"hppa*-hp-hpux*" {
lappend obj_options "additional_flags=+z"
}
"mips-sgi-irix*" {
# Disable SGI compiler's implicit -Dsgi
lappend obj_options "additional_flags=-Usgi"
}
default {
# don't know what the compiler is...
}
}
}
}
set outdir [file dirname $dest]
set objects ""
foreach source $sources {
set sourcebase [file tail $source]
if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} {
return -1
}
lappend objects ${outdir}/${sourcebase}.o
}
if [istarget "hppa*-*-hpux*"] {
remote_exec build "ld -b ${objects} -o ${dest}"
} else {
set link_options $options
if [test_compiler_info "xlc-*"] {
lappend link_options "additional_flags=-qmkshrobj"
} else {
lappend link_options "additional_flags=-shared"
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a"
}
}
if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
return -1
}
}
}
# This is just like gdb_compile_pthreads, above, except that we always add the
# objc library for compiling Objective-C programs
proc gdb_compile_objc {source dest type options} {
set built_binfile 0
set why_msg "unrecognized error"
foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
if { $lib == "solaris" } {
set lib "-lpthread -lposix4"
}
if { $lib != "-lobjc" } {
set lib "-lobjc $lib"
}
set options_with_lib [concat $options [list libs=$lib quiet]]
set ccout [gdb_compile $source $dest $type $options_with_lib]
switch -regexp -- $ccout {
".*no posix threads support.*" {
set why_msg "missing threads include file"
break
}
".*cannot open -lpthread.*" {
set why_msg "missing runtime threads library"
}
".*Can't find library for -lpthread.*" {
set why_msg "missing runtime threads library"
}
{^$} {
pass "successfully compiled objc with posix threads test case"
set built_binfile 1
break
}
}
}
if {!$built_binfile} {
unsupported "Couldn't compile $source: ${why_msg}"
return -1
}
}
proc send_gdb { string } {
global suppress_flag;
if { $suppress_flag } {
return "suppressed";
}
return [remote_send host "$string"];
}
#
#
proc gdb_expect { args } {
if { [llength $args] == 2 && [lindex $args 0] != "-re" } {
set atimeout [lindex $args 0];
set expcode [list [lindex $args 1]];
} else {
set expcode $args;
}
upvar timeout timeout;
if [target_info exists gdb,timeout] {
if [info exists timeout] {
if { $timeout < [target_info gdb,timeout] } {
set gtimeout [target_info gdb,timeout];
} else {
set gtimeout $timeout;
}
} else {
set gtimeout [target_info gdb,timeout];
}
}
if ![info exists gtimeout] {
global timeout;
if [info exists timeout] {
set gtimeout $timeout;
}
}
if [info exists atimeout] {
if { ![info exists gtimeout] || $gtimeout < $atimeout } {
set $gtimeout $atimeout;
}
} else {
if ![info exists gtimeout] {
# Eeeeew.
set gtimeout 60;
}
}
global suppress_flag;
global remote_suppress_flag;
if [info exists remote_suppress_flag] {
set old_val $remote_suppress_flag;
}
if [info exists suppress_flag] {
if { $suppress_flag } {
set remote_suppress_flag 1;
}
}
set code [catch \
{uplevel remote_expect host $gtimeout $expcode} string];
if [info exists old_val] {
set remote_suppress_flag $old_val;
} else {
if [info exists remote_suppress_flag] {
unset remote_suppress_flag;
}
}
if {$code == 1} {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
} elseif {$code == 2} {
return -code return $string
} elseif {$code == 3} {
return
} elseif {$code > 4} {
return -code $code $string
}
}
# gdb_expect_list MESSAGE SENTINEL LIST -- expect a sequence of outputs
#
# Check for long sequence of output by parts.
# MESSAGE: is the test message to be printed with the test success/fail.
# SENTINEL: Is the terminal pattern indicating that output has finished.
# LIST: is the sequence of outputs to match.
# If the sentinel is recognized early, it is considered an error.
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc gdb_expect_list {test sentinel list} {
global gdb_prompt
global suppress_flag
set index 0
set ok 1
if { $suppress_flag } {
set ok 0
unresolved "${test}"
}
while { ${index} < [llength ${list}] } {
set pattern [lindex ${list} ${index}]
set index [expr ${index} + 1]
if { ${index} == [llength ${list}] } {
if { ${ok} } {
gdb_expect {
-re "${pattern}${sentinel}" {
# pass "${test}, pattern ${index} + sentinel"
}
-re "${sentinel}" {
fail "${test} (pattern ${index} + sentinel)"
set ok 0
}
-re ".*A problem internal to GDB has been detected" {
fail "${test} (GDB internal error)"
set ok 0
gdb_internal_error_resync
}
timeout {
fail "${test} (pattern ${index} + sentinel) (timeout)"
set ok 0
}
}
} else {
# unresolved "${test}, pattern ${index} + sentinel"
}
} else {
if { ${ok} } {
gdb_expect {
-re "${pattern}" {
# pass "${test}, pattern ${index}"
}
-re "${sentinel}" {
fail "${test} (pattern ${index})"
set ok 0
}
-re ".*A problem internal to GDB has been detected" {
fail "${test} (GDB internal error)"
set ok 0
gdb_internal_error_resync
}
timeout {
fail "${test} (pattern ${index}) (timeout)"
set ok 0
}
}
} else {
# unresolved "${test}, pattern ${index}"
}
}
}
if { ${ok} } {
pass "${test}"
return 0
} else {
return 1
}
}
#
#
proc gdb_suppress_entire_file { reason } {
global suppress_flag;
warning "$reason\n";
set suppress_flag -1;
}
#
# Set suppress_flag, which will cause all subsequent calls to send_gdb and
# gdb_expect to fail immediately (until the next call to
# gdb_stop_suppressing_tests).
#
proc gdb_suppress_tests { args } {
global suppress_flag;
return; # fnf - disable pending review of results where
# testsuite ran better without this
incr suppress_flag;
if { $suppress_flag == 1 } {
if { [llength $args] > 0 } {
warning "[lindex $args 0]\n";
} else {
warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n";
}
}
}
#
# Clear suppress_flag.
#
proc gdb_stop_suppressing_tests { } {
global suppress_flag;
if [info exists suppress_flag] {
if { $suppress_flag > 0 } {
set suppress_flag 0;
clone_output "Tests restarted.\n";
}
} else {
set suppress_flag 0;
}
}
proc gdb_clear_suppressed { } {
global suppress_flag;
set suppress_flag 0;
}
proc gdb_start { } {
default_gdb_start
}
proc gdb_exit { } {
catch default_gdb_exit
}
#
# gdb_load_cmd -- load a file into the debugger.
# ARGS - additional args to load command.
# return a -1 if anything goes wrong.
#
proc gdb_load_cmd { args } {
global gdb_prompt
if [target_info exists gdb_load_timeout] {
set loadtimeout [target_info gdb_load_timeout]
} else {
set loadtimeout 1600
}
send_gdb "load $args\n"
verbose "Timeout is now $loadtimeout seconds" 2
gdb_expect $loadtimeout {
-re "Loading section\[^\r\]*\r\n" {
exp_continue
}
-re "Start address\[\r\]*\r\n" {
exp_continue
}
-re "Transfer rate\[\r\]*\r\n" {
exp_continue
}
-re "Memory access error\[^\r\]*\r\n" {
perror "Failed to load program"
return -1
}
-re "$gdb_prompt $" {
return 0
}
-re "(.*)\r\n$gdb_prompt " {
perror "Unexpected reponse from 'load' -- $expect_out(1,string)"
return -1
}
timeout {
perror "Timed out trying to load $args."
return -1
}
}
return -1
}
# gdb_download
#
# Copy a file to the remote target and return its target filename.
# Schedule the file to be deleted at the end of this test.
proc gdb_download { filename } {
global cleanfiles
set destname [remote_download target $filename]
lappend cleanfiles $destname
return $destname
}
# gdb_load_shlibs LIB...
#
# Copy the listed libraries to the target.
proc gdb_load_shlibs { args } {
if {![is_remote target]} {
return
}
foreach file $args {
gdb_download $file
}
# Even if the target supplies full paths for shared libraries,
# they may not be paths for this system.
gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "" ""
}
#
# gdb_load -- load a file into the debugger.
# Many files in config/*.exp override this procedure.
#
proc gdb_load { arg } {
return [gdb_file_cmd $arg]
}
# gdb_reload -- load a file into the target. Called before "running",
# either the first time or after already starting the program once,
# for remote targets. Most files that override gdb_load should now
# override this instead.
proc gdb_reload { } {
# For the benefit of existing configurations, default to gdb_load.
# Specifying no file defaults to the executable currently being
# debugged.
return [gdb_load ""]
}
proc gdb_continue { function } {
global decimal
return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
}
proc default_gdb_init { args } {
global gdb_wrapper_initialized
global cleanfiles
set cleanfiles {}
gdb_clear_suppressed;
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
set gdb_wrapper_initialized 0
# Unlike most tests, we have a small number of tests that generate
# a very large amount of output. We therefore increase the expect
# buffer size to be able to contain the entire test output.
match_max -d 30000
# Also set this value for the currently running GDB.
match_max [match_max -d]
# We want to add the name of the TCL testcase to the PASS/FAIL messages.
if { [llength $args] > 0 } {
global pf_prefix
set file [lindex $args 0];
set pf_prefix "[file tail [file dirname $file]]/[file tail $file]:";
}
global gdb_prompt;
if [target_info exists gdb_prompt] {
set gdb_prompt [target_info gdb_prompt];
} else {
set gdb_prompt "\\(gdb\\)"
}
}
proc gdb_init { args } {
return [eval default_gdb_init $args];
}
proc gdb_finish { } {
global cleanfiles
# Exit first, so that the files are no longer in use.
gdb_exit
if { [llength $cleanfiles] > 0 } {
eval remote_file target delete $cleanfiles
set cleanfiles {}
}
}
global debug_format
set debug_format "unknown"
# Run the gdb command "info source" and extract the debugging format
# information from the output and save it in debug_format.
proc get_debug_format { } {
global gdb_prompt
global verbose
global expect_out
global debug_format
set debug_format "unknown"
send_gdb "info source\n"
gdb_expect 10 {
-re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" {
set debug_format $expect_out(1,string)
verbose "debug format is $debug_format"
return 1;
}
-re "No current source file.\r\n$gdb_prompt $" {
perror "get_debug_format used when no current source file"
return 0;
}
-re "$gdb_prompt $" {
warning "couldn't check debug format (no valid response)."
return 1;
}
timeout {
warning "couldn't check debug format (timed out)."
return 1;
}
}
}
# Return true if FORMAT matches the debug format the current test was
# compiled with. FORMAT is a shell-style globbing pattern; it can use
# `*', `[...]', and so on.
#
# This function depends on variables set by `get_debug_format', above.
proc test_debug_format {format} {
global debug_format
return [expr [string match $format $debug_format] != 0]
}
# Like setup_xfail, but takes the name of a debug format (DWARF 1,
# COFF, stabs, etc). If that format matches the format that the
# current test was compiled with, then the next test is expected to
# fail for any target. Returns 1 if the next test or set of tests is
# expected to fail, 0 otherwise (or if it is unknown). Must have
# previously called get_debug_format.
proc setup_xfail_format { format } {
set ret [test_debug_format $format];
if {$ret} then {
setup_xfail "*-*-*"
}
return $ret;
}
proc gdb_step_for_stub { } {
global gdb_prompt;
if ![target_info exists gdb,use_breakpoint_for_stub] {
if [target_info exists gdb_stub_step_command] {
set command [target_info gdb_stub_step_command];
} else {
set command "step";
}
send_gdb "${command}\n";
set tries 0;
gdb_expect 60 {
-re "(main.* at |.*in .*start).*$gdb_prompt" {
return;
}
-re ".*$gdb_prompt" {
incr tries;
if { $tries == 5 } {
fail "stepping out of breakpoint function";
return;
}
send_gdb "${command}\n";
exp_continue;
}
default {
fail "stepping out of breakpoint function";
return;
}
}
}
send_gdb "where\n";
gdb_expect {
-re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
set file $expect_out(1,string);
set linenum [expr $expect_out(2,string) + 1];
set breakplace "${file}:${linenum}";
}
default {}
}
send_gdb "break ${breakplace}\n";
gdb_expect 60 {
-re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
set breakpoint $expect_out(1,string);
}
-re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
set breakpoint $expect_out(1,string);
}
default {}
}
send_gdb "continue\n";
gdb_expect 60 {
-re "Breakpoint ${breakpoint},.*$gdb_prompt" {
gdb_test "delete $breakpoint" ".*" "";
return;
}
default {}
}
}
# gdb_get_line_number TEXT [FILE]
#
# Search the source file FILE, and return the line number of the
# first line containing TEXT. If no match is found, return -1.
#
# TEXT is a string literal, not a regular expression.
#
# The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is
# specified, and does not start with "/", then it is assumed to be in
# "$srcdir/$subdir". This is awkward, and can be fixed in the future,
# by changing the callers and the interface at the same time.
# In particular: gdb.base/break.exp, gdb.base/condbreak.exp,
# gdb.base/ena-dis-br.exp.
#
# Use this function to keep your test scripts independent of the
# exact line numbering of the source file. Don't write:
#
# send_gdb "break 20"
#
# This means that if anyone ever edits your test's source file,
# your test could break. Instead, put a comment like this on the
# source file line you want to break at:
#
# /* breakpoint spot: frotz.exp: test name */
#
# and then write, in your test script (which we assume is named
# frotz.exp):
#
# send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
#
# (Yes, Tcl knows how to handle the nested quotes and brackets.
# Try this:
# $ tclsh
# % puts "foo [lindex "bar baz" 1]"
# foo baz
# %
# Tcl is quite clever, for a little stringy language.)
#
# ===
#
# The previous implementation of this procedure used the gdb search command.
# This version is different:
#
# . It works with MI, and it also works when gdb is not running.
#
# . It operates on the build machine, not the host machine.
#
# . For now, this implementation fakes a current directory of
# $srcdir/$subdir to be compatible with the old implementation.
# This will go away eventually and some callers will need to
# be changed.
#
# . The TEXT argument is literal text and matches literally,
# not a regular expression as it was before.
#
# . State changes in gdb, such as changing the current file
# and setting $_, no longer happen.
#
# After a bit of time we can forget about the differences from the
# old implementation.
#
# --chastain 2004-08-05
proc gdb_get_line_number { text { file "" } } {
global srcdir
global subdir
global srcfile
if { "$file" == "" } then {
set file "$srcfile"
}
if { ! [regexp "^/" "$file"] } then {
set file "$srcdir/$subdir/$file"
}
if { [ catch { set fd [open "$file"] } message ] } then {
perror "$message"
return -1
}
set found -1
for { set line 1 } { 1 } { incr line } {
if { [ catch { set nchar [gets "$fd" body] } message ] } then {
perror "$message"
return -1
}
if { $nchar < 0 } then {
break
}
if { [string first "$text" "$body"] >= 0 } then {
set found $line
break
}
}
if { [ catch { close "$fd" } message ] } then {
perror "$message"
return -1
}
return $found
}
# gdb_continue_to_end:
# The case where the target uses stubs has to be handled specially. If a
# stub is used, we set a breakpoint at exit because we cannot rely on
# exit() behavior of a remote target.
#
# mssg is the error message that gets printed.
proc gdb_continue_to_end {mssg} {
if [target_info exists use_gdb_stub] {
if {![gdb_breakpoint "exit"]} {
return 0
}
gdb_test "continue" "Continuing..*Breakpoint .*exit.*" \
"continue until exit at $mssg"
} else {
# Continue until we exit. Should not stop again.
# Don't bother to check the output of the program, that may be
# extremely tough for some remote systems.
gdb_test "continue"\
"Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\
"continue until exit at $mssg"
}
}
proc rerun_to_main {} {
global gdb_prompt
if [target_info exists use_gdb_stub] {
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint .*main .*$gdb_prompt $"\
{pass "rerun to main" ; return 0}
-re "$gdb_prompt $"\
{fail "rerun to main" ; return 0}
timeout {fail "(timeout) rerun to main" ; return 0}
}
} else {
send_gdb "run\n"
gdb_expect {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
-re "Starting program.*$gdb_prompt $"\
{pass "rerun to main" ; return 0}
-re "$gdb_prompt $"\
{fail "rerun to main" ; return 0}
timeout {fail "(timeout) rerun to main" ; return 0}
}
}
}
# Print a message and return true if a test should be skipped
# due to lack of floating point suport.
proc gdb_skip_float_test { msg } {
if [target_info exists gdb,skip_float_tests] {
verbose "Skipping test '$msg': no float tests.";
return 1;
}
return 0;
}
# Print a message and return true if a test should be skipped
# due to lack of stdio support.
proc gdb_skip_stdio_test { msg } {
if [target_info exists gdb,noinferiorio] {
verbose "Skipping test '$msg': no inferior i/o.";
return 1;
}
return 0;
}
proc gdb_skip_bogus_test { msg } {
return 0;
}
# Return true if a test should be skipped due to lack of XML support
# in the host GDB.
proc gdb_skip_xml_test { } {
global gdb_prompt
global srcdir
global xml_missing_cached
if {[info exists xml_missing_cached]} {
return $xml_missing_cached
}
gdb_start
set xml_missing_cached 0
gdb_test_multiple "set tdesc filename ${srcdir}/gdb.xml/trivial.xml" "" {
-re ".*XML support was disabled at compile time.*$gdb_prompt $" {
set xml_missing_cached 1
}
-re ".*$gdb_prompt $" { }
}
gdb_exit
return $xml_missing_cached
}
# Note: the procedure gdb_gnu_strip_debug will produce an executable called
# ${binfile}.dbglnk, which is just like the executable ($binfile) but without
# the debuginfo. Instead $binfile has a .gnu_debuglink section which contains
# the name of a debuginfo only file. This file will be stored in the
# gdb.base/.debug subdirectory.
# Functions for separate debug info testing
# starting with an executable:
# foo --> original executable
# at the end of the process we have:
# foo.stripped --> foo w/o debug info
# .debug/foo.debug --> foo's debug info
# foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug.
# Return the name of the file in which we should stor EXEC's separated
# debug info. EXEC contains the full path.
proc separate_debug_filename { exec } {
# In a .debug subdirectory off the same directory where the testcase
# executable is going to be. Something like:
# <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug.
# This is the default location where gdb expects to findi
# the debug info file.
set exec_dir [file dirname $exec]
set exec_file [file tail $exec]
set debug_dir [file join $exec_dir ".debug"]
set debug_file [file join $debug_dir "${exec_file}.debug"]
return $debug_file
}
# Return the build-id hex string (usually 160 bits as 40 hex characters)
# converted to the form: .build-id/ab/cdef1234...89.debug
# Return "" if no build-id found.
proc build_id_debug_filename_get { exec } {
set tmp "${exec}-tmp"
set objcopy_program [transform objcopy]
set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $exec $tmp" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return ""
}
set fi [open $tmp]
fconfigure $fi -translation binary
# Skip the NOTE header.
read $fi 16
set data [read $fi]
close $fi
file delete $tmp
if ![string compare $data ""] then {
return ""
}
# Convert it to hex.
binary scan $data H* data
set data [regsub {^..} $data {\0/}]
return ".build-id/${data}.debug";
}
# Create stripped files for DEST, replacing it. If ARGS is passed, it is a
# list of optional flags. The only currently supported flag is no-main,
# which removes the symbol entry for main from the separate debug file.
proc gdb_gnu_strip_debug { dest args } {
set debug_file [separate_debug_filename $dest]
set strip_to_file_program [transform strip]
set objcopy_program [transform objcopy]
# Make sure the directory that will hold the separated debug
# info actually exists.
set debug_dir [file dirname $debug_file]
if {! [file isdirectory $debug_dir]} {
file mkdir $debug_dir
}
set debug_link [file tail $debug_file]
set stripped_file "${dest}.stripped"
# Get rid of the debug info, and store result in stripped_file
# something like gdb/testsuite/gdb.base/blah.stripped.
set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
# Get rid of everything but the debug info, and store result in debug_file
# This will be in the .debug subdirectory, see above.
set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
# If no-main is passed, strip the symbol for main from the separate
# file. This is to simulate the behavior of elfutils's eu-strip, which
# leaves the symtab in the original file only. There's no way to get
# objcopy or strip to remove the symbol table without also removing the
# debugging sections, so this is as close as we can get.
if { [llength $args] == 1 && [lindex $args 0] == "no-main" } {
set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
file delete "${debug_file}"
file rename "${debug_file}-tmp" "${debug_file}"
}
# Link the two previous output files together, adding the .gnu_debuglink
# section to the stripped_file, containing a pointer to the debug_file,
# save the new file in dest.
# This will be the regular executable filename, in the usual location.
set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
return 0
}
# Test the output of GDB_COMMAND matches the pattern obtained
# by concatenating all elements of EXPECTED_LINES. This makes
# it possible to split otherwise very long string into pieces.
# If third argument is not empty, it's used as the name of the
# test to be printed on pass/fail.
proc help_test_raw { gdb_command expected_lines args } {
set message $gdb_command
if [llength $args]>0 then {
set message [lindex $args 0]
}
set expected_output [join $expected_lines ""]
gdb_test "${gdb_command}" "${expected_output}" $message
}
# Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of commands in that class. The presence of
# command list and standard epilogue will be tested automatically.
proc test_class_help { command_class expected_initial_lines args } {
set l_stock_body {
"List of commands\:.*\[\r\n\]+"
"Type \"help\" followed by command name for full documentation\.\[\r\n\]+"
"Type \"apropos word\" to search for commands related to \"word\"\.[\r\n\]+"
"Command name abbreviations are allowed if unambiguous\."
}
set l_entire_body [concat $expected_initial_lines $l_stock_body]
eval [list help_test_raw "help ${command_class}" $l_entire_body] $args
}
# COMMAND_LIST should have either one element -- command to test, or
# two elements -- abbreviated command to test, and full command the first
# element is abbreviation of.
# The command must be a prefix command. EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of subcommands. The presence of
# subcommand list and standard epilogue will be tested automatically.
proc test_prefix_command_help { command_list expected_initial_lines args } {
set command [lindex $command_list 0]
if {[llength $command_list]>1} {
set full_command [lindex $command_list 1]
} else {
set full_command $command
}
# Use 'list' and not just {} because we want variables to
# be expanded in this list.
set l_stock_body [list\
"List of $full_command subcommands\:.*\[\r\n\]+"\
"Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\
"Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\
"Command name abbreviations are allowed if unambiguous\."]
set l_entire_body [concat $expected_initial_lines $l_stock_body]
if {[llength $args]>0} {
help_test_raw "help ${command}" $l_entire_body [lindex $args 0]
} else {
help_test_raw "help ${command}" $l_entire_body
}
}
# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
# to pass to untested, if something is wrong. OPTIONS are passed
# to gdb_compile directly.
proc build_executable { testname executable {sources ""} {options {debug}} } {
global objdir
global subdir
global srcdir
if {[llength $sources]==0} {
set sources ${executable}.c
}
set binfile ${objdir}/${subdir}/${executable}
set objects {}
for {set i 0} "\$i<[llength $sources]" {incr i} {
set s [lindex $sources $i]
if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } {
untested $testname
return -1
}
lappend objects "${binfile}${i}.o"
}
if { [gdb_compile $objects "${binfile}" executable $options] != "" } {
untested $testname
return -1
}
if [get_compiler_info ${binfile}] {
return -1
}
return 0
}
# Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is
# the name of binary in ${objdir}/${subdir}.
proc clean_restart { executable } {
global srcdir
global objdir
global subdir
set binfile ${objdir}/${subdir}/${executable}
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
if [target_info exists gdb_stub] {
gdb_step_for_stub;
}
}
# Prepares for testing, by calling build_executable, and then clean_restart.
# Please refer to build_executable for parameter description.
proc prepare_for_testing { testname executable {sources ""} {options {debug}}} {
if {[build_executable $testname $executable $sources $options] == -1} {
return -1
}
clean_restart $executable
return 0
}
proc get_valueof { fmt exp default } {
global gdb_prompt
set test "get valueof \"${exp}\""
set val ${default}
gdb_test_multiple "print${fmt} ${exp}" "$test" {
-re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" {
set val $expect_out(1,string)
pass "$test ($val)"
}
timeout {
fail "$test (timeout)"
}
}
return ${val}
}
proc get_integer_valueof { exp default } {
global gdb_prompt
set test "get integer valueof \"${exp}\""
set val ${default}
gdb_test_multiple "print /d ${exp}" "$test" {
-re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" {
set val $expect_out(1,string)
pass "$test ($val)"
}
timeout {
fail "$test (timeout)"
}
}
return ${val}
}
proc get_hexadecimal_valueof { exp default } {
global gdb_prompt
send_gdb "print /x ${exp}\n"
set test "get hexadecimal valueof \"${exp}\""
gdb_expect {
-re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" {
set val $expect_out(1,string)
pass "$test"
}
timeout {
set val ${default}
fail "$test (timeout)"
}
}
return ${val}
}
proc get_sizeof { type default } {
return [get_integer_valueof "sizeof (${type})" $default]
}
# Log gdb command line and script if requested.
if {[info exists TRANSCRIPT]} {
rename send_gdb real_send_gdb
rename remote_spawn real_remote_spawn
rename remote_close real_remote_close
global gdb_transcript
set gdb_transcript ""
global gdb_trans_count
set gdb_trans_count 1
proc remote_spawn {args} {
global gdb_transcript gdb_trans_count outdir
if {$gdb_transcript != ""} {
close $gdb_transcript
}
set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w]
puts $gdb_transcript [lindex $args 1]
incr gdb_trans_count
return [uplevel real_remote_spawn $args]
}
proc remote_close {args} {
global gdb_transcript
if {$gdb_transcript != ""} {
close $gdb_transcript
set gdb_transcript ""
}
return [uplevel real_remote_close $args]
}
proc send_gdb {args} {
global gdb_transcript
if {$gdb_transcript != ""} {
puts -nonewline $gdb_transcript [lindex $args 0]
}
return [uplevel real_send_gdb $args]
}
}