4e772f4426
These implement a new serial line interface for talking to remote targets. * configure.in: Link ser-hardwire.c to ser-unix.c for all hosts, EXCEPT go32, which gets ser-go32.c. * remote.c: Use new serial interface. More remote-xxx's to be converted later. * ser-bsd.c, ser-termios.c: Removed. * serial.c: New. Implements common operations for all serial types. * ser-unix.c: New. Unix specific serial operations for various flavors of Unix (Posix, SysV, BSD). * serial.h: Generic serial interface defs. * config/i386/go32.mh, config/i386/i386bsd.h, config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove ser-bsd.o from XDEPFILES. All the magic is now handled in configure.in.
874 lines
31 KiB
Makefile
874 lines
31 KiB
Makefile
#Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
|
|
|
|
# This file is part of GDB.
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program; if not, write to the Free Software
|
|
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
prefix = /usr/local
|
|
|
|
program_transform_name =
|
|
exec_prefix = $(prefix)
|
|
bindir = $(exec_prefix)/bin
|
|
libdir = $(exec_prefix)/lib
|
|
tooldir = $(libdir)/$(target_alias)
|
|
|
|
datadir = $(prefix)/lib
|
|
mandir = $(prefix)/man
|
|
man1dir = $(mandir)/man1
|
|
man2dir = $(mandir)/man2
|
|
man3dir = $(mandir)/man3
|
|
man4dir = $(mandir)/man4
|
|
man5dir = $(mandir)/man5
|
|
man6dir = $(mandir)/man6
|
|
man7dir = $(mandir)/man7
|
|
man8dir = $(mandir)/man8
|
|
man9dir = $(mandir)/man9
|
|
infodir = $(prefix)/info
|
|
includedir = $(prefix)/include
|
|
docdir = $(datadir)/doc
|
|
|
|
SHELL = /bin/sh
|
|
|
|
INSTALL = install -c
|
|
INSTALL_PROGRAM = $(INSTALL)
|
|
INSTALL_DATA = $(INSTALL)
|
|
|
|
AR = ar
|
|
AR_FLAGS = qv
|
|
RANLIB = ranlib
|
|
|
|
# Flags that describe where you can find the termcap library.
|
|
# This can be overridden in the host Makefile fragment file.
|
|
TERMCAP = -ltermcap
|
|
|
|
# System V: If you compile gdb with a compiler which uses the coff
|
|
# encapsulation feature (this is a function of the compiler used, NOT
|
|
# of the m-?.h file selected by config.gdb), you must make sure that
|
|
# the GNU nm is the one that is used by munch.
|
|
|
|
# If you are compiling with GCC, make sure that either 1) You use the
|
|
# -traditional flag, or 2) You have the fixed include files where GCC
|
|
# can reach them. Otherwise the ioctl calls in inflow.c
|
|
# will be incorrectly compiled. The "fixincludes" script in the gcc
|
|
# distribution will fix your include files up.
|
|
#CC=cc
|
|
#CC=gcc -traditional
|
|
GCC=gcc
|
|
|
|
# Directory containing source files. Don't clean up the spacing,
|
|
# this exact string is matched for by the "configure" script.
|
|
srcdir = .
|
|
|
|
# It is also possible that you will need to add -I/usr/include/sys to the
|
|
# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
|
|
# is where it should be according to Posix).
|
|
|
|
# If you use bison instead of yacc, it needs to include the "-y" argument.
|
|
#BISON="bison -y"
|
|
BISON=yacc
|
|
YACC=$(BISON)
|
|
|
|
# where to find texinfo; GDB dist should include a recent one
|
|
TEXIDIR=${srcdir}/../texinfo
|
|
|
|
# where to find makeinfo, preferably one designed for texinfo-2
|
|
MAKEINFO=makeinfo
|
|
|
|
# Set this up with gcc if you have gnu ld and the loader will print out
|
|
# line numbers for undefinded refs.
|
|
#CC-LD=gcc -static
|
|
CC-LD=${CC}
|
|
|
|
# Where is the "include" directory? Traditionally ../include or ./include
|
|
INCLUDE_DIR = ${srcdir}/../include
|
|
INCLUDE_DEP = $$(INCLUDE_DIR)
|
|
|
|
# Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
|
|
# or ./mmalloc (When we want the binary library built from it, we use
|
|
# ${MMALLOC_DIR}${subdir}.)
|
|
# Note that mmalloc can still be used on systems without mmap().
|
|
# To use your system malloc, comment out the following defines.
|
|
MMALLOC_DIR = ${srcdir}/../mmalloc
|
|
MMALLOC_DEP = $$(MMALLOC_DIR)
|
|
MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a
|
|
# To use your system malloc, uncomment MMALLOC_DISABLE.
|
|
#MMALLOC_DISABLE = -DNO_MMALLOC
|
|
# To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
|
|
#MMALLOC_CHECK = -DNO_MMALLOC_CHECK
|
|
MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
|
|
|
|
# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
|
|
# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
|
|
BFD_DIR = ${srcdir}/../bfd
|
|
BFD_DEP = $$(BFD_DIR)
|
|
BFD_LIB = ./../bfd${subdir}/libbfd.a
|
|
|
|
# Where is the source dir for the READLINE library? Traditionally in .. or .
|
|
# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
|
|
READLINE_DIR = ${srcdir}/../readline
|
|
READLINE_DEP = $$(READLINE_DIR)
|
|
RL_LIB = ./../readline${subdir}/libreadline.a
|
|
|
|
# All the includes used for CFLAGS and for lint.
|
|
# -I. for config files.
|
|
# -I${srcdir} possibly for regex.h also.
|
|
# -I${srcdir}/config for more generic config files.
|
|
INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/config -I$(INCLUDE_DIR)
|
|
|
|
# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
|
|
# from the config/ directory.
|
|
GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
|
|
#PROFILE_CFLAGS = -pg
|
|
|
|
# CFLAGS is specifically reserved for setting from the command line
|
|
# when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
|
|
CFLAGS = -g
|
|
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
|
|
INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
|
|
# None of the things in CFLAGS will do any harm, and on some systems
|
|
# (e.g. SunOS4) it is important to use the MH_CFLAGS.
|
|
LDFLAGS = $(CFLAGS)
|
|
|
|
# Where is the "-liberty" library, containing getopt and obstack?
|
|
LIBIBERTY_DIR = ${srcdir}/../libiberty
|
|
LIBIBERTY = ./../libiberty${subdir}/libiberty.a
|
|
|
|
# Where is the "-lopcodes" library, with (some of) the opcode tables and
|
|
# disassemblers?
|
|
OPCODES = ./../opcodes${subdir}/libopcodes.a
|
|
|
|
# The config/mh-* file must define REGEX and REGEX1 on USG machines.
|
|
# If your sysyem is missing alloca(), or, more likely, it's there but
|
|
# it doesn't work, define ALLOCA & ALLOCA1 too.
|
|
|
|
# Libraries and corresponding dependencies for compiling gdb.
|
|
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
|
|
# TERMCAP comes after readline, since readline depends on it.
|
|
CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
|
|
${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
|
|
CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
|
|
${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
|
|
|
|
ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
|
|
ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
|
|
|
|
VERSION = 4.8.2
|
|
DIST=gdb
|
|
|
|
LINT=/usr/5bin/lint
|
|
LINTFLAGS= -I${BFD_DIR}
|
|
|
|
RUNTEST=runtest
|
|
RUNTESTFLAGS=
|
|
|
|
# Host and target-dependent makefile fragments come in here.
|
|
####
|
|
# End of host and target-dependent makefile fragments
|
|
|
|
FLAGS_TO_PASS = \
|
|
"prefix=$(prefix)" \
|
|
"exec_prefix=$(exec_prefix)" \
|
|
"against=$(against)" \
|
|
"AR=$(AR)" \
|
|
"AR_FLAGS=$(AR_FLAGS)" \
|
|
"CC=$(CC)" \
|
|
"CFLAGS=$(CFLAGS)" \
|
|
$(start-sanitize-chill)\
|
|
"CHILLFLAGS=$(CHILLFLAGS)" \
|
|
"CHILL=$(CHILL)" \
|
|
"CHILL_LIB=$(CHILL_LIB)" \
|
|
$(end-sanitize-chill)\
|
|
"CXX=$(CXX)" \
|
|
"CXXFLAGS=$(CXXFLAGS)" \
|
|
"RANLIB=$(RANLIB)" \
|
|
"MAKEINFO=$(MAKEINFO)" \
|
|
"INSTALL=$(INSTALL)" \
|
|
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
|
|
"INSTALL_DATA=$(INSTALL_DATA)" \
|
|
"RUNTEST=$(RUNTEST)" \
|
|
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
|
|
"BISON=$(BISON)"
|
|
|
|
# Flags that we pass when building the testsuite.
|
|
|
|
CC_FOR_TARGET = ` \
|
|
if [ -f $${rootme}/../gcc/Makefile ] ; then \
|
|
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
|
|
else \
|
|
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
|
|
echo $(CC); \
|
|
else \
|
|
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
|
|
fi; \
|
|
fi`
|
|
|
|
CXX = gcc
|
|
|
|
CXX_FOR_TARGET = ` \
|
|
if [ -f $${rootme}/../gcc/Makefile ] ; then \
|
|
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
|
|
else \
|
|
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
|
|
echo $(CXX); \
|
|
else \
|
|
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
|
|
fi; \
|
|
fi`
|
|
|
|
$(start-sanitize-chill)
|
|
CHILLFLAGS = $(CFLAGS)
|
|
CHILL = gcc
|
|
CHILL_FOR_TARGET = ` \
|
|
if [ -f $${rootme}/../gcc/Makefile ] ; then \
|
|
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
|
|
else \
|
|
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
|
|
echo $(CC); \
|
|
else \
|
|
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
|
|
fi; \
|
|
fi`
|
|
CHILL_LIB = -lchill
|
|
|
|
$(end-sanitize-chill)
|
|
|
|
# The use of $$(x_FOR_TARGET) reduces the command line length by not
|
|
# duplicating the lengthy definition.
|
|
TARGET_FLAGS_TO_PASS = \
|
|
"prefix=$(prefix)" \
|
|
"exec_prefix=$(exec_prefix)" \
|
|
"against=$(against)" \
|
|
'CC=$$(CC_FOR_TARGET)' \
|
|
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
|
|
"CFLAGS=$(CFLAGS)" \
|
|
$(start-sanitize-chill)\
|
|
"CHILLFLAGS=$(CHILLFLAGS)" \
|
|
'CHILL=$$(CHILL_FOR_TARGET)' \
|
|
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
|
|
"CHILL_LIB=$(CHILL_LIB)" \
|
|
$(end-sanitize-chill)\
|
|
'CXX=$$(CXX_FOR_TARGET)' \
|
|
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
|
|
"CXXFLAGS=$(CXXFLAGS)" \
|
|
"MAKEINFO=$(MAKEINFO)" \
|
|
"INSTALL=$(INSTALL)" \
|
|
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
|
|
"INSTALL_DATA=$(INSTALL_DATA)" \
|
|
"RUNTEST=$(RUNTEST)" \
|
|
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
|
|
"BISON=$(BISON)"
|
|
|
|
# All source files that go into linking GDB, except config-specified files.
|
|
# Source files which are included via a config/*/* Makefile fragment should
|
|
# *not* be specified here; they're in "ALLDEPFILES".
|
|
SFILES = blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c c-typeprint.c \
|
|
c-valprint.c ch-exp.y ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
|
|
command.c complaints.c core.c cp-valprint.c dbxread.c demangle.c \
|
|
dwarfread.c elfread.c environ.c eval.c expprint.c findvar.c gdbtypes.c \
|
|
infcmd.c inflow.c infrun.c language.c m2-exp.y m2-lang.c m2-typeprint.c \
|
|
m2-valprint.c main.c maint.c mem-break.c minsyms.c mipsread.c \
|
|
objfiles.c parse.c printcmd.c remote.c source.c stabsread.c stack.c \
|
|
symfile.c symmisc.c symtab.c target.c typeprint.c utils.c valarith.c \
|
|
valops.c valprint.c values.c serial.c ser-hardwire.c
|
|
|
|
# Files that are not source code, but need to go into gdb-$(VERSION).tar.Z.
|
|
NONSRC = Makefile.in depend alldeps.mak createtags munch configure.in \
|
|
ChangeLog ChangeLog-9091 ChangeLog-3.x gdb.1 refcard.ps README TODO \
|
|
TAGS NEWS Projects .gdbinit COPYING $(YYFILES) copying.c copying.awk \
|
|
saber.suppress standalone.c stuff.c kdb-start.c putenv.c gcc.patch \
|
|
${srcdir}/nindy-share/Makefile ${srcdir}/nindy-share/VERSION \
|
|
${srcdir}/nindy-share/README ${srcdir}/vx-share/README \
|
|
${srcdir}/config/convex/Convex.notes
|
|
|
|
# All source files that lint should look at
|
|
LINTFILES = $(SFILES) $(YYFILES) init.c
|
|
|
|
# Any additional files specified on these lines should also be added to
|
|
# the NONSRC definition, so they go in the tar files.
|
|
SFILES_STAND = $(SFILES) standalone.c
|
|
SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
|
|
|
|
# Header files that are not named in config/*/* Makefile fragments go here.
|
|
HFILES = breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
|
|
expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h gdb-stabs.h \
|
|
inferior.h language.h minimon.h objfiles.h parser-defs.h \
|
|
partial-stab.h serial.h signals.h solib.h symfile.h symtab.h \
|
|
stabsread.h target.h terminal.h typeprint.h xcoffsolib.h value.h \
|
|
c-lang.h ch-lang.h m2-lang.h complaints.h ns32k-opcode.h valprint.h \
|
|
config/m68k/tm-m68k.h config/pa/tm-hppa.h \
|
|
config/i960/tm-i960.h config/sparc/tm-sparc.h config/tm-sunos.h \
|
|
config/tm-sysv4.h config/m68k/xm-m68k.h config/sparc/xm-sparc.h \
|
|
config/xm-sysv4.h config/vax/xm-vax.h config/nm-trash.h \
|
|
${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphsun.h \
|
|
${srcdir}/29k-share/udi/udiproc.h ${srcdir}/29k-share/udi/udipt29k.h \
|
|
${srcdir}/29k-share/udi/udiptcfg.h ${srcdir}/29k-share/udi/udisoc.h \
|
|
${srcdir}/29k-share/udi_soc ${srcdir}/nindy-share/b.out.h \
|
|
${srcdir}/nindy-share/block_io.h ${srcdir}/nindy-share/coff.h \
|
|
${srcdir}/nindy-share/demux.h ${srcdir}/nindy-share/env.h \
|
|
${srcdir}/nindy-share/stop.h ${srcdir}/nindy-share/ttycntl.h \
|
|
${srcdir}/vx-share/dbgRpcLib.h ${srcdir}/vx-share/ptrace.h \
|
|
${srcdir}/vx-share/vxTypes.h ${srcdir}/vx-share/vxWorks.h \
|
|
${srcdir}/vx-share/wait.h ${srcdir}/vx-share/xdr_ld.h \
|
|
${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_rdb.h
|
|
|
|
# GDB "info" files, which should be included in their entirety
|
|
INFOFILES = gdb.info*
|
|
|
|
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
|
|
|
|
POSSLIBS = regex.c regex.h alloca.c
|
|
|
|
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
|
|
|
|
# Subdirectories of gdb, which should be included in their entirety in
|
|
# gdb-xxx.tar.Z:
|
|
TARDIRS = doc sparclite # tests
|
|
|
|
DEPFILES = ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
|
|
|
|
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
|
|
TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS}
|
|
|
|
TARFILES = ${SFILES} ${HFILES} ${NONSRC} ${ALLDEPFILES} $(ALLCONFIG) \
|
|
$(ALLPARAM) $(INFOFILES) ${POSSLIBS} ${REMOTE_EXAMPLES}
|
|
|
|
OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
|
|
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
|
|
symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
|
|
command.o utils.o expprint.o environ.o gdbtypes.o \
|
|
copying.o $(DEPFILES) mem-break.o target.o \
|
|
putenv.o parse.o language.o $(YYOBJ) \
|
|
buildsym.o objfiles.o minsyms.o maint.o demangle.o \
|
|
dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
|
|
stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
|
|
typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
|
|
c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \
|
|
serial.o ser-hardwire.o
|
|
|
|
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
|
|
|
|
TSOBS = inflow.o
|
|
|
|
NTSOBS = standalone.o
|
|
|
|
TSSTART = /lib/crt0.o
|
|
|
|
NTSSTART = kdb-start.o
|
|
|
|
SUBDIRS = doc testsuite
|
|
|
|
# For now, shortcut the "configure GDB for fewer languages" stuff.
|
|
YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
|
|
YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
|
|
|
|
# Prevent Sun make from putting in the machine type. Setting
|
|
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
|
|
.c.o:
|
|
${CC} -c ${INTERNAL_CFLAGS} $<
|
|
|
|
all: gdb
|
|
$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
|
|
|
|
installcheck:
|
|
check: force
|
|
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do
|
|
info dvi: force
|
|
$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
|
|
install-info: force
|
|
$(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do
|
|
clean-info: force
|
|
$(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do
|
|
|
|
gdb.z:gdb.1
|
|
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
|
|
pack gdb.t ; rm -f gdb.t
|
|
mv gdb.t.z gdb.z
|
|
|
|
install: gdb
|
|
-parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
|
|
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
|
|
-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi
|
|
-parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
|
|
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
|
|
-if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi
|
|
-n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
|
|
$(INSTALL_PROGRAM) gdb $(bindir)/$$n; \
|
|
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1
|
|
$(M_INSTALL)
|
|
$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
|
|
|
|
init.c: $(srcdir)/munch $(OBS) $(TSOBS)
|
|
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
|
|
|
|
gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
|
|
${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \
|
|
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
|
|
|
|
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
|
|
#setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
|
|
#load ./init.c $(SFILES)
|
|
#unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
|
|
#unload ${srcdir}/vx-share/*.h
|
|
#unload ${srcdir}/nindy-share/[A-Z]*
|
|
#load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
|
|
#load copying.c version.c
|
|
#load ../opcodes/libopcodes.a
|
|
#load ../libiberty/libiberty.a
|
|
#load ../bfd/libbfd.a
|
|
#load ../readline/libreadline.a
|
|
#load ../mmalloc/libmmalloc.a
|
|
#load -ltermcap
|
|
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
|
|
echo "Load .c corresponding to:" $(DEPFILES)
|
|
|
|
|
|
# This is useful when debugging GDB, because some Unix's don't let you run GDB
|
|
# on itself without copying the executable. So "make gdb1" will make
|
|
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
|
|
# Removing gdb1 before the copy is the right thing if gdb1 is open
|
|
# in another process.
|
|
gdb1: gdb
|
|
rm -f gdb1
|
|
cp gdb gdb1
|
|
|
|
# This is a remote stub which runs under unix and starts up an
|
|
# inferior process. This is at least useful for debugging GDB's
|
|
# remote support.
|
|
rapp: $(RAPP_OBS)
|
|
rm -f rapp_init.c
|
|
${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
|
|
${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
|
|
|
|
# Support for building Makefile out of configured pieces, automatically
|
|
# generated dependencies, etc. alldeps.mak is a file that contains
|
|
# "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG,
|
|
# all cadged from the current contents of the config subtree.
|
|
|
|
alldeps.mak: force
|
|
rm -f alldeps.mak alldeps*.tmp allparam*.tmp allconfig*.tmp
|
|
for i in `find ${srcdir}/config -name '*.m[ht]'` ; do \
|
|
echo $$i >>allconfig.tmp; \
|
|
awk <$$i ' \
|
|
$$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
|
|
|| $$1 == "NATDEPFILES=" { \
|
|
for (i = 2; i <= NF; i++) \
|
|
print $$i >> "alldeps.tmp" ; \
|
|
} \
|
|
$$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
|
|
print $$2 >> "allparam.tmp" }' ; \
|
|
done
|
|
sort <alldeps.tmp | uniq | \
|
|
sed -e 's/arm-convert.o/arm-convert.s/' \
|
|
-e 's!^Onindy.o!nindy-share/Onindy.c!' \
|
|
-e 's!^nindy.o!nindy-share/nindy.c!' \
|
|
-e 's!ttybreak.o!nindy-share/ttybreak.c!' \
|
|
-e 's!ttyflush.o!nindy-share/ttyflush.c!' \
|
|
-e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
|
|
-e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
|
|
-e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
|
|
-e 's!udr.o!29k-share/udi/udr.c!' \
|
|
-e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \
|
|
-e '/..\/sim\//d' \
|
|
-e '/..\/opcodes\//d' \
|
|
-e 's/\.o/.c/' \
|
|
>alldeps2.tmp
|
|
for i in `cat allparam.tmp` ; do \
|
|
find ${srcdir}/config -name $$i -print >>allparam2.tmp ; \
|
|
done
|
|
echo '# Start of "alldeps.mak" definitions' >>alldeps.mak;
|
|
sort <alldeps2.tmp | uniq | awk 'BEGIN {printf "ALLDEPFILES="} \
|
|
NR == 0 {printf $$0;} \
|
|
NR != 0 {printf "\\\n" $$0} \
|
|
END {printf "\n\n"}' >>alldeps.mak;
|
|
sort <allparam2.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
|
|
NR == 0 {printf $$0;} \
|
|
NR != 0 {printf "\\\n" $$0} \
|
|
END {printf "\n\n"}' >>alldeps.mak;
|
|
sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
|
|
NR == 0 {printf $$0;} \
|
|
NR != 0 {printf "\\\n" $$0} \
|
|
END {printf "\n\n"}' >>alldeps.mak;
|
|
echo '# End of "alldeps.mak" definitions' >>alldeps.mak;
|
|
rm -f alldeps*.tmp allparam*.tmp allconfig*.tmp
|
|
|
|
# The sed script makes everything which depends on {x,t}m.h depend on
|
|
# config.status as well, in case someone reconfigures gdb out from
|
|
# under an already compiled gdb.
|
|
depend: $(SOURCES) Makefile.in
|
|
@echo Ignore errors about non-existent system-supplied include files
|
|
@echo for systems other than the one you are using.
|
|
@echo Also ignore parse errors in valops.c, and any errors in
|
|
@echo arm-convert.s.
|
|
touch xm.h tm.h nm.h
|
|
-$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \
|
|
-I${READLINE_DIR} $(INCLUDE_CFLAGS) \
|
|
`ls $(SOURCES) | grep -v '\.[hy]$$' | \
|
|
sort -u` >depend.tmp
|
|
# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
|
|
# for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
|
|
# by the various subdirectories.
|
|
if [ "${srcdir}" = "." ] ; then \
|
|
<depend.tmp sed \
|
|
-e 's; ./xm.h; xm.h;g' \
|
|
-e 's; ./tm.h; tm.h;g' \
|
|
-e 's; ./nm.h; nm.h;g' \
|
|
-e 's; \./; $${srcdir}/;g' \
|
|
-e 's; vx-share/; $${srcdir}/vx-share/;g' \
|
|
-e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
|
|
-e 's; 29k-share/; $${srcdir}/29k-share/;g' \
|
|
>depend.tm2; \
|
|
rm depend.tmp; \
|
|
mv depend.tm2 depend.tmp; \
|
|
fi
|
|
<depend.tmp sed \
|
|
-e 's; [xt]m.h;& config.status;g' \
|
|
-e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
|
|
-e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
|
|
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
|
|
-e 's; ./xm.h; xm.h config.status;g' \
|
|
-e 's; ./tm.h; tm.h config.status;g' \
|
|
-e 's; ./nm.h; nm.h config.status;g' \
|
|
>depend
|
|
rm depend.tmp
|
|
|
|
config.status:
|
|
@echo "You must configure gdb. Look at the README file for details."
|
|
@false
|
|
|
|
# This checks the configure.in file versus the config/ directory.
|
|
config-check: config-check-hosts config-check-targets
|
|
config-check-hosts:
|
|
grep gdb_host= ${srcdir}/configure.in | \
|
|
sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
|
|
(cd ${srcdir}/config; ls *.mh) >HOSTdir.o
|
|
diff -u HOSTconf.o HOSTdir.o
|
|
|
|
config-check-targets:
|
|
grep gdb_target= ${srcdir}/configure.in | \
|
|
sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
|
|
(cd ${srcdir}/config; ls *.mt) >TARGdir.o
|
|
diff -u HOSTconf.o HOSTdir.o
|
|
|
|
# These are not generated by "make depend" because they only are there
|
|
# for some machines.
|
|
# But these rules don't do what we want; we want to hack the foo.o: tm.h
|
|
# dependency to do the right thing.
|
|
tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
|
|
tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
|
|
xm-news1000.h: xm-news.h
|
|
xm-i386-sv32.h: xm-i386.h
|
|
tm-i386gas.h: tm-i386.h
|
|
xm-sun4os4.h: xm-sparc.h
|
|
tm-sun4os4.h: tm-sparc.h
|
|
xm-vaxult.h: xm-vax.h
|
|
xm-vaxbsd.h: xm-vax.h
|
|
|
|
kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
|
|
rm -f init.c
|
|
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
|
|
$(CC) $(LDFLAGS) -c init.c $(CLIBS)
|
|
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
|
|
-lc $(CLIBS)
|
|
|
|
# Put the proper machine-specific files first.
|
|
# createtags will edit the .o in DEPFILES into .c
|
|
TAGS: ${TAGFILES}
|
|
$(srcdir)/createtags $(TM_FILE) ${XM_FILE} ${NAT_FILE} \
|
|
$(DEPFILES) ${TAGFILES}
|
|
tags: TAGS
|
|
|
|
# Making distributions of GDB and friends.
|
|
|
|
# Make a tar file containing the GDB directory of the distribution.
|
|
gdb.tar.Z: force_update
|
|
$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
|
|
$(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
|
|
|
|
# Make a directory `proto-gdb.dir' that contains an image of the GDB
|
|
# directory of the distribution, built up with symlinks. Note that this
|
|
# make target is not directly referenced by any other rules in this makefile,
|
|
# it is referenced by the makefile in the parent directory.
|
|
make-proto-gdb.dir: force_update
|
|
$(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
|
|
$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
|
|
|
|
# Set up the GDB source directory for distribution, by building all files that
|
|
# are products of other files.
|
|
setup-to-dist: update-depend force_update
|
|
../configure none
|
|
(cd doc; $(MAKE) $(MFLAGS) GDBvn.texi)
|
|
$(MAKE) $(MFLAGS) gdb.info
|
|
$(MAKE) $(MFLAGS) refcard.ps
|
|
|
|
# Update the "depend" and "alldeps.mak" files in a source directory.
|
|
# We update alldeps.mak first, since it is used to generate the list
|
|
# of files to be checked for dependencies.
|
|
update-depend: update-alldeps force_update
|
|
../configure none -norecursion
|
|
rm -f depend
|
|
$(MAKE) $(MFLAGS) depend
|
|
|
|
# Update the "alldeps.mak" file in a source directory.
|
|
update-alldeps: force_update
|
|
../configure none -norecursion
|
|
rm -f alldeps.mak
|
|
$(MAKE) $(MFLAGS) alldeps.mak
|
|
|
|
# Build a tar file from a proto-gdb.dir.
|
|
gdb-$(VERSION).tar.Z: force_update
|
|
rm -f gdb.tar gdb-$(VERSION).tar.Z
|
|
$(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1
|
|
ln -s proto-gdb.dir $(DIST)
|
|
tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
|
|
rm -rf $(DIST) proto-gdb.dir
|
|
|
|
# Build a proto-gdb.dir after GDB has been set up for distribution.
|
|
# This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
|
|
# built in the setup-to-dist process, since it defines things like ALLCONFIG
|
|
# and ALLDEPFILES, that we need.
|
|
make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
|
|
rm -rf proto-gdb.dir
|
|
mkdir proto-gdb.dir
|
|
rootme=`pwd`/ ; export rootme ; \
|
|
for i in `echo ${TARDIRS}`; do \
|
|
(cd proto-gdb.dir ; \
|
|
mkdir -p $$i; \
|
|
cd $$i; \
|
|
ln -s $${rootme}/$$i/* .; \
|
|
rm -rf SCCS CVS CVS.adm RCS config.status; \
|
|
if test -f Makefile.in; then rm Makefile; else true; fi;); \
|
|
done ; \
|
|
for i in `echo ${TARFILES}`; do \
|
|
(cd proto-gdb.dir ; \
|
|
dir=`dirname $$i`; \
|
|
if test -d $$dir; then true; else mkdir -p $$dir; fi; \
|
|
ln -s $${rootme}/$$i $$i;); \
|
|
done
|
|
chmod og=u `find . -print`
|
|
|
|
clean:
|
|
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
|
|
rm -f *.o ${ADD_FILES} *~
|
|
rm -f init.c version.c
|
|
rm -f gdb core make.log
|
|
rm -f gdb[0-9]
|
|
|
|
distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
|
|
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
|
|
rm -f tm.h xm.h config.status
|
|
rm -f y.output yacc.acts yacc.tmp
|
|
rm -f ${TESTS} Makefile depend
|
|
|
|
realclean: clean
|
|
@$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do
|
|
rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
|
|
rm -f tm.h xm.h config.status
|
|
rm -f Makefile depend
|
|
|
|
STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
|
|
|
|
subdir_do: force
|
|
@for i in $(DODIRS); do \
|
|
if [ -d ./$$i ] ; then \
|
|
if (cd ./$$i; \
|
|
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
|
|
else exit 1 ; fi ; \
|
|
else true ; fi ; \
|
|
done
|
|
|
|
Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
|
|
$(SHELL) ./config.status
|
|
|
|
force:
|
|
|
|
# Documentation!
|
|
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
|
|
refcard.dvi:
|
|
( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) )
|
|
mv ./doc/refcard.dvi .
|
|
|
|
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
|
|
refcard.ps:
|
|
( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) )
|
|
mv ./doc/refcard.ps .
|
|
|
|
# GDB MANUAL: TeX dvi file
|
|
gdb.dvi:
|
|
( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) )
|
|
mv ./doc/gdb.dvi .
|
|
|
|
# GDB MANUAL: info file
|
|
gdb.info:
|
|
( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) )
|
|
mv ./doc/gdb.info* .
|
|
|
|
# Make copying.c from COPYING
|
|
copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
|
|
awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
|
|
|
|
version.c: Makefile
|
|
echo 'char *version = "$(VERSION)";' >version.c
|
|
|
|
# c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
|
|
# in srcdir, then compiled in target dir to c-exp.tab.o.
|
|
# ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
|
|
# (some "makes" rewrite the VPATH into command arguments if they match deps).
|
|
# Remove bogus decls for malloc/realloc/free which conflict with everything
|
|
# else.
|
|
c-exp.tab.o: c-exp.tab.c
|
|
c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in
|
|
@echo 'Expect 4 shift/reduce conflicts.'
|
|
${YACC} $(srcdir)/c-exp.y
|
|
-sed -e '/extern.*malloc/d' \
|
|
-e '/extern.*realloc/d' \
|
|
-e '/extern.*free/d' \
|
|
-e '/include.*malloc.h/d' \
|
|
-e 's/malloc/xmalloc/g' \
|
|
-e 's/realloc/xrealloc/g' \
|
|
< y.tab.c > ././c-exp.tab.c
|
|
-rm y.tab.c
|
|
|
|
# start-sanitize-chill
|
|
# ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
|
|
# in srcdir, then compiled in target dir to ch-exp.tab.o.
|
|
# Remove bogus decls for malloc/realloc/free which conflict with everything
|
|
# else.
|
|
ch-exp.tab.o: ch-exp.tab.c
|
|
ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in
|
|
@echo 'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
|
|
${YACC} $(srcdir)/ch-exp.y
|
|
-sed -e '/extern.*malloc/d' \
|
|
-e '/extern.*realloc/d' \
|
|
-e '/extern.*free/d' \
|
|
-e '/include.*malloc.h/d' \
|
|
-e 's/malloc/xmalloc/g' \
|
|
-e 's/realloc/xrealloc/g' \
|
|
< y.tab.c > ././ch-exp.tab.c
|
|
-rm y.tab.c
|
|
# end-sanitize-chill
|
|
|
|
# m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
|
|
# in srcdir, then compiled in target dir to m2-exp.tab.o.
|
|
# Remove bogus decls for malloc/realloc/free which conflict with everything
|
|
# else.
|
|
m2-exp.tab.o: m2-exp.tab.c
|
|
m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in
|
|
${YACC} $(srcdir)/m2-exp.y
|
|
-sed -e '/extern.*malloc/d' \
|
|
-e '/extern.*realloc/d' \
|
|
-e '/extern.*free/d' \
|
|
-e '/include.*malloc.h/d' \
|
|
-e 's/malloc/xmalloc/g' \
|
|
-e 's/realloc/xrealloc/g' \
|
|
< y.tab.c > ././m2-exp.tab.c
|
|
-rm y.tab.c
|
|
|
|
|
|
main.o: ${srcdir}/main.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $<
|
|
|
|
# The symbol-file readers have dependencies on BFD header files.
|
|
dbxread.o: ${srcdir}/dbxread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
|
|
|
|
coffread.o: ${srcdir}/coffread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
|
|
|
|
mipsread.o: ${srcdir}/mipsread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
|
|
|
|
elfread.o: ${srcdir}/elfread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
|
|
|
|
dwarfread.o: ${srcdir}/dwarfread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c
|
|
|
|
stabsread.o: ${srcdir}/stabsread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c
|
|
|
|
# Used on RS/6000 native
|
|
xcoffread.o: ${srcdir}/xcoffread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
|
|
|
|
xcoffexec.o: ${srcdir}/xcoffexec.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
|
|
|
|
# Used on HP-PA native
|
|
paread.o: ${srcdir}/paread.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c
|
|
|
|
# Drag in the files that are in another directory.
|
|
|
|
xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c
|
|
|
|
xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
|
|
|
|
xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
|
|
|
|
nindy.o: ${srcdir}/nindy-share/nindy.c
|
|
${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \
|
|
${srcdir}/nindy-share/nindy.c
|
|
|
|
Onindy.o: ${srcdir}/nindy-share/Onindy.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c
|
|
|
|
ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c
|
|
|
|
ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c
|
|
|
|
udr.o: ${srcdir}/29k-share/udi/udr.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c
|
|
|
|
udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c
|
|
${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c
|
|
|
|
lint: $(LINTFILES)
|
|
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
|
|
`echo ${DEPFILES} | sed 's/\.o /\.c /g'
|
|
|
|
gdb.cxref: $(SFILES)
|
|
cxref -I. $(SFILES) >gdb.cxref
|
|
|
|
force_update:
|
|
|
|
# GNU Make has an annoying habit of putting *all* the Makefile variables
|
|
# into the environment, unless you include this target as a circumvention.
|
|
# Rumor is that this will be fixed (and this target can be removed)
|
|
# in GNU Make 4.0.
|
|
.NOEXPORT:
|
|
|
|
# GNU Make 3.63 has a different problem: it keeps tacking command line
|
|
# overrides onto the definition of $(MAKE). This variable setting
|
|
# will remove them.
|
|
MAKEOVERRIDES=
|
|
|
|
$(start-sanitize-chill)
|
|
## This is ugly, but I don't want GNU make to put these variables in
|
|
## the environment. Older makes will see this as a set of targets
|
|
## with no dependencies and no actions.
|
|
unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
|
|
$(end-sanitize-chill)
|
|
|
|
# This is the end of "Makefile.in". When built into "Makefile"
|
|
# by the configure script, two things are added below this point:
|
|
# alldeps.mak -- defintions of all files that are used in
|
|
# host- or target-dependent configurations
|
|
# depend -- what .o files depend on what .c and .h files,
|
|
# for all configurations.
|