old-cross-binutils/gdb/Makefile.in

643 lines
22 KiB
Makefile

##Copyright (C) 1989-1991 Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
# Host and target-dependent makefile fragments come in here.
####
# End of host and target-dependent makefile fragments
# Destination directory of the software tree build
destdir = /usr/local
# Place to install binaries in the destination tree.
bindir=$(destdir)/bin
# System V: If you compile gdb with a compiler which uses the coff
# encapsulation feature (this is a function of the compiler used, NOT
# of the m-?.h file selected by config.gdb), you must make sure that
# the GNU nm is the one that is used by munch.
# If you are compiling with GCC, make sure that either 1) You use the
# -traditional flag, or 2) You have the fixed include files where GCC
# can reach them. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
#CC=cc
#CC=gcc -traditional
GCC=gcc
# Directory containing source files. Don't clean up the spacing,
# this exact string is matched for by the "configure" script.
srcdir = .
# It is also possible that you will need to add -I/usr/include/sys to the
# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
# is where it should be according to Posix).
BISON=bison -y
BISONFLAGS=
YACC=$(BISON) $(BISONFLAGS)
# YACC=yacc
SHELL=/bin/sh
MAKE=make
# Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
# Berkeley/Sun don't have quite enough.
#M4=/usr/5bin/m4
M4=gm4
# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${srcdir}/../texinfo/fsf
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefinded refs.
#CC-LD=gcc -static
CC-LD=${CC}
# define this to be "gmalloc.o" if you want to use the gnu malloc routine
# (useful for debugging memory allocation problems in gdb). To use your
# system malloc, uncomment the following two lines.
#GNU_MALLOC =
#MALLOC_CFLAGS = -DNO_MALLOC_CHECK
GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
MALLOC_CFLAGS =
# Where is the "include" directory? Traditionally ../include or ./include
INCLUDE_DIR = ${srcdir}/../include
INCLUDE_DEP = $$(INCLUDE_DIR)
# Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
# (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
BFD_DIR = ${srcdir}/../bfd
BFD_DEP = $$(BFD_DIR)
BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
# Where is the source dir for the READLINE library? Traditionally in .. or .
# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
READLINE_DIR = ${srcdir}/../readline
READLINE_DEP = $$(READLINE_DIR)
RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
# All the includes used for CFLAGS and for lint.
# -I. for config files.
# -I${srcdir} possibly for regex.h also.
INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
# {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
# CFLAGS for GDB
GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
#PROFILE_CFLAGS = -pg
CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
# None of the things in CFLAGS will do any harm, and on some systems
# (e.g. SunOS4) it is important to use the M_CFLAGS.
LDFLAGS = $(CFLAGS)
# Where is the "-liberty" library, containing getopt and obstack?
LIBIBERTY_DIR = ${srcdir}/../libiberty
LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
# Flags that describe where you can find the termcap library.
# You may need to make other arrangements for USG.
TERMCAP = -ltermcap
# The xconfig file must define REGEX and REGEX1 on USG machines.
# If your sysyem is missing alloca(), or, more likely, it's there but
# it doesn't work, define ALLOCA & ALLOCA1 too.
# If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes last, since readline depends on it.
CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
VERSION = 4.0
DIST=gdb
LINT=/usr/5bin/lint
LINTFLAGS=
# Source files in the main directory.
# Files which are included via a tconfig/* or xconfig/* file
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_MAINDIR = \
blockframe.c breakpoint.c command.c core.c \
environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
main.c printcmd.c \
remote.c source.c stack.c symmisc.c symtab.c symfile.c \
utils.c valarith.c valops.c valprint.c values.c expread.y \
signame.c cplus-dem.c mem-break.c target.c inftarg.c \
dbxread.c coffread.c \
ieee-float.c
# Source files in subdirectories (which will be handled separately by
# 'make gdb.tar.Z').
# Files which are included via a tconfig/* or xconfig/* file
# should *not* be specified here; they're in "ALLDEPFILES".
SFILES_SUBDIR = \
${srcdir}/vx-share/dbgRpcLib.h \
${srcdir}/vx-share/ptrace.h \
${srcdir}/vx-share/reg.h \
${srcdir}/vx-share/vxTypes.h \
${srcdir}/vx-share/vxWorks.h \
${srcdir}/vx-share/wait.h \
${srcdir}/vx-share/xdr_ld.h \
${srcdir}/vx-share/xdr_ptrace.h \
${srcdir}/vx-share/xdr_rdb.h \
${srcdir}/vx-share/xdr_regs.h \
${srcdir}/nindy-share/b.out.h \
${srcdir}/nindy-share/block_io.h \
${srcdir}/nindy-share/coff.h \
${srcdir}/nindy-share/demux.h \
${srcdir}/nindy-share/env.h \
${srcdir}/nindy-share/stop.h \
${srcdir}/nindy-share/ttycntl.h
# Non-source files in subdirs, that should go into gdb.tar.Z.
NONSRC_SUBDIR = \
${srcdir}/nindy-share/Makefile \
${srcdir}/nindy-share/VERSION
# All source files that go into linking GDB, except config-specified files.
SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
# All source files that lint should look at
LINTFILES = $(SFILES) expread.tab.c init.c
# Any additional files specified on these lines should also be added to
# the OTHERS = definition below, so they go in the tar files.
SFILES_STAND = $(SFILES) standalone.c
SFILES_KGDB = $(SFILES) stuff.c kdb-start.c
# Header files that are not named in tconfig/* or xconfig/* go here.
HFILES= breakpoint.h command.h defs.h environ.h \
expression.h frame.h gdbcmd.h gdbcore.h \
getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
signals.h signame.h symfile.h symtab.h \
target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
value.h
# Header files for machine opcode tables.
# when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
# business, since they will be included in the separate includes tar file
# rather than in the gdb tar file.
OPCODE_DIR =
OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
$(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
$(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
$(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
$(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
$(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
$(OPCODE_DIR)tahoe-opcode.h
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
ansidecl.h gmalloc.h
POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
POSSLIBS = $(POSSLIBS_MAINDIR)
TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
# tdesc-lib cannot be named simply tdesc, because if it were, GNU make
# would try to make it from tdesc.c.
# tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
OTHERS = Makefile.in depend alldeps.mak \
createtags munch configure configure.in config.sub \
ChangeLog ChangeLog-3.x \
README TODO TAGS WHATS.NEW Projects \
.gdbinit COPYING expread.tab.c \
copying.c Convex.notes copying.awk \
saber.suppress standalone.c stuff.c kdb-start.c \
putenv.c
# Subdirectories of gdb, which should be included in their entirety in
# gdb-xxx.tar.Z:
TARDIRS = doc hp-include # tests
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
DEPFILES= ${TDEPFILES} ${XDEPFILES}
SOURCES=$(SFILES) $(ALLDEPFILES)
TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
command.o utils.o expread.o expprint.o environ.o version.o \
copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
inftarg.o ieee-float.o putenv.o \
dbxread.o coffread.o # mipsread.o
RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
TSOBS = core.o inflow.o
NTSOBS = standalone.o
TSSTART = /lib/crt0.o
NTSSTART = kdb-start.o
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
.c.o:
${CC} -c ${CFLAGS} $<
all: gdb
install: gdb
cp gdb $(bindir)/gdb.new
mv $(bindir)/gdb.new $(bindir)/gdb
$(M_INSTALL)
init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
$(CLIBS) $(LOADLIBES)
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
#setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
#unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
#unload ${srcdir}/nindy-share/[A-Z]*
#load ${srcdir}/expread.tab.c
#load copying.c version.c
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
#load ${LIBIBERTY_DIR}/*.c
#load ${BFD_DIR}/*.c
#load ${READLINE_DIR}/*.c
#load -ltermcap
##void mcheck(a) void (*a)(); { }
##void mtrace() { }
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1: gdb
rm -f gdb1
cp gdb gdb1
# This is a remote stub which runs under unix and starts up an
# inferior process. This is at least useful for debugging GDB's
# remote support.
rapp: $(RAPP_OBS)
rm -f rapp_init.c
${srcdir}/munch ${RAPP_OBS} > rapp_init.c
${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
# Support for building Makefile out of configured pieces, automatically
# generated dependencies, etc. alldeps.mak is a file that contains
# "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
# ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
# contents of the xconfig and tconfig subdirectories.
alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
${srcdir}/xconfig/*[0-9A-Za-z] | \
grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
echo $$i >>allconfig.tmp; \
awk <$$i ' \
$$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
for (i = 2; i <= NF; i++) \
print $$i >> "alldeps.tmp" ; \
} \
$$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
print $$2 >> "allparam.tmp" }' ; \
done
sort <alldeps.tmp | uniq | \
sed -e 's/arm-convert.o/arm-convert.s/' \
-e 's!^Onindy.o!nindy-share/Onindy.c!' \
-e 's!^nindy.o!nindy-share/nindy.c!' \
-e 's!ttybreak.o!nindy-share/ttybreak.c!' \
-e 's!ttyflush.o!nindy-share/ttyflush.c!' \
-e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
-e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
-e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
-e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
-e 's/\.o/.c/' \
>alldeps2.tmp
echo '# Start of "alldeps.mak" definitions' \
>>alldeps.mak;
echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
>>alldeps.mak;
grep -v / alldeps2.tmp | \
awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
grep / alldeps2.tmp | \
awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
NR == 0 {printf $$0;} \
NR != 0 {printf "\\\n" $$0} \
END {printf "\n\n"}' >>alldeps.mak;
echo '# End of "alldeps.mak" definitions' \
>>alldeps.mak;
rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
# The sed script makes everything which depends on {x,t}m.h depend on
# config.status as well, in case someone reconfigures gdb out from
# under an already compiled gdb.
depend: $(SOURCES) Makefile.in
@echo Ignore errors about non-existent system-supplied include files
@echo for systems other than the one you are using.
@echo "If xm.h and tm.h don't exist, the error messages saying so"
@echo can safely be ignored.
@echo Also ignore parse errors in valops.c, and any errors in
@echo arm-convert.s.
-$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
`ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
# If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
# for xm.h and tm.h. This allows the same "depend" file to be used
# by the various subdirectories.
if [ "${srcdir}" = "." ] ; then \
<depend.tmp sed \
-e 's; ./xm.h; xm.h;g' \
-e 's; ./tm.h; tm.h;g' \
-e 's; \./; $${srcdir}/;g' \
-e 's; vx-share/; $${srcdir}/vx-share/;g' \
-e 's; nindy-share/; $${srcdir}/nindy-share/;g' \
>depend.tm2; \
rm depend.tmp; \
mv depend.tm2 depend.tmp; \
fi
<depend.tmp sed \
-e 's; [xt]m.h;& config.status;g' \
-e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
-e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
-e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
-e 's; ./xm.h; xm.h config.status;g' \
-e 's; ./tm.h; tm.h config.status;g' \
>depend
rm depend.tmp
config.status:
@echo "You must configure gdb. Look at the README file for details."
@false
# These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
xm-news1000.h : xm-news.h
xm-i386-sv32.h : xm-i386.h
tm-i386gas.h: tm-i386.h
xm-sun4os4.h : xm-sparc.h
tm-sun4os4.h : tm-sparc.h
kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
rm -f init.c
$(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
$(CC) $(LDFLAGS) -c init.c $(CLIBS)
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-lc $(CLIBS)
# Put the proper machine-specific files first.
# createtags will edit the .o in DEPFILES into .c
TAGS: ${TAGFILES}
$(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
tags: TAGS
gdb.tar.Z: force_update
./configure none
rm -f alldeps.mak
$(MAKE) $(MFLAGS) alldeps.mak
./configure none
rm -f depend
$(MAKE) $(MFLAGS) depend
./configure none
(cd doc; $(MAKE) $(MFLAGS) rdl-apps.texi)
$(MAKE) $(MFLAGS) gdb.info
$(MAKE) $(MFLAGS) refcard.ps
$(MAKE) $(MFLAGS) gdb-$(VERSION).tar.Z
gdb-$(VERSION).tar.Z: ${TARFILES} ${TARDIRS} gdb.info
rm -f gdb.tar gdb-$(VERSION).tar.Z; rm -rf $(DIST)
mkdir $(DIST)
cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
cd $(DIST) ; ln -s ../${INFOFILES} .
cd $(DIST); for i in ${TARDIRS}; do \
(mkdir $$i; cd $$i; \
ln -s ../../$$i/* .; \
rm -rf SCCS CVS.adm RCS); done
mkdir $(DIST)/xconfig ${DIST}/tconfig
cd $(DIST)/tconfig ; \
for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
mkdir $(DIST)/vx-share $(DIST)/nindy-share
cd $(DIST)/tconfig ; \
for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
do ln -s ../../$$i ../$$i ; done
chmod og=u `find . -print`
tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
rm -rf $(DIST)
clean:
rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
rm -f init.c init.o version.c
rm -f gdb core gdb.tar gdb.tar.Z make.log
rm -f gdb[0-9]
cd $(srcdir)/doc; make clean
distclean: clean expread.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f ${TESTS} Makefile depend
realclean: clean
rm -f expread.tab.c TAGS
rm -f tm.h xm.h config.status
rm -f Makefile depend
STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
# Copy the object files from a particular stage into a subdirectory.
stage1: force
-mkdir stage1
-mv -f $(STAGESTUFF) stage1
stage2: force
-mkdir stage2
-mv -f $(STAGESTUFF) stage2
stage3: force
-mkdir stage3
-mv -f $(STAGESTUFF) stage3
against=stage2
comparison: force
for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
de-stage1: force
- (cd stage1 ; mv -f * ..)
- rmdir stage1
de-stage2: force
- (cd stage2 ; mv -f * ..)
- rmdir stage2
de-stage3: force
- (cd stage3 ; mv -f * ..)
- rmdir stage3
Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
(cd $(srcdir) ; \
./configure +destdir=$(destdir) \
+norecurse \
`if [ "$(srcdir)" != "." ] ; then echo +subdirs; fi` \
$(host) +target=$(target))
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
refcard.dvi : $(srcdir)/doc/refcard.tex
( cd $(srcdir)/doc; make refcard.dvi )
mv $(srcdir)/doc/refcard.dvi .
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
refcard.ps : $(srcdir)/doc/refcard.tex
( cd $(srcdir)/doc; make refcard.ps )
mv $(srcdir)/doc/refcard.ps .
# GDB MANUAL: TeX dvi file
gdb.dvi : $(srcdir)/doc/gdb-all.texi $(srcdir)/doc/rdl-apps.texi
( cd $(srcdir)/doc; make gdb.dvi )
mv $(srcdir)/doc/gdb.dvi .
# GDB MANUAL: info file
gdb.info: $(srcdir)/doc/gdb-all.texi
( cd $(srcdir)/doc; make gdb.info )
mv $(srcdir)/doc/gdb.info* .
$(srcdir)/doc/gdb-all.texi:
(cd $(srcdir)/doc; $(MAKE) gdb-all.texi)
$(srcdir)/doc/rdl-apps.texi:
(cd $(srcdir)/doc; $(MAKE) rdl-apps.texi)
# Make copying.c from COPYING
copying.c : COPYING copying.awk
awk -f copying.awk < COPYING > copying.c
version.c : Makefile.in
echo 'char *version = "$(VERSION)";' >version.c
# expread.tab.c is generated in srcdir from expread.y, then compiled in target
# directory to expread.o.
${srcdir}/expread.tab.c : $(srcdir)/expread.y
@echo 'Expect 4 shift/reduce conflicts.'
${YACC} $(srcdir)/expread.y
mv y.tab.c ${srcdir}/expread.tab.c
expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
frame.h expression.h value.h command.h
$(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
mv expread.tab.o expread.o
# dbxread, coffread, mipsread have dependencies on BFD header files.
dbxread.o: ${srcdir}/dbxread.c
${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
coffread.o: ${srcdir}/coffread.c
${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
mipsread.o: ${srcdir}/mipsread.c
${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
# Drag in the files that are in another directory.
xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
nindy.o: ${srcdir}/nindy-share/nindy.c
${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
Onindy.o: ${srcdir}/nindy-share/Onindy.c
${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
tdesc-lib/libdc.o : force_update
cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update :
# When used with GDB, the demangler should never look for leading
# underscores because GDB strips them off during symbol read-in. Thus
# -Dnounderscore.
cplus-dem.o : cplus-dem.c
${CC} -c ${CFLAGS} -Dnounderscore \
`echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
# This is the end of "Makefile.in". When built into "Makefile"
# by the configure script, two things are added below this point:
# alldeps.mak -- defintions of all files that are used in
# host- or target-dependent configurations
# depend -- what .o files depend on what .c and .h files,
# for all configurations.