old-cross-binutils/gdb/ChangeLog
2000-02-26 09:30:30 +00:00

1013 lines
38 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2000-02-26 Kevin Buettner <kevinb@redhat.com>
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Add
comment explaining motivation behind this function and why
the generic facilities won't work for this platform.
* rs6000-tdep.c (skip_prologue): Always test to make sure
that an instruction is read successfully from the target's
memory. Introduce notion of instructions which may appear in
the prologue, but may not end the prologue. Added explicit
check for nop instruction. Use memset() to zero the frame
data instead of assignment from a statically allocated,
uninitialized structure.
Sat Feb 26 17:15:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Chris Faylor is responsible for all MS Windows
systems. Note that Jim Blandy as maintainer for ``tracing
bytecode stuff''
2000-02-25 Fernando Nasser <fnasser@cygnus.com>
From: Thomas Zenker <thz@Lennartz-electronic.DE>
* rdi-share/hsys.c: to compile under 4.4BSD derived systems (FreeBSD,
NetBSD...) sys_errlist should not be declared in hsys.c.
NEED_SYSERRLIST is set already by configure, so we can use it.
* rdi-share/unixcomm.c: 4.4BSD derived systems define BSD, but are
posix compliant and we should not work with the old compatibility
stuff. Because of that I undef BSD in case of FBSD etc and include
sys/ioctl to get the flags.
* rdi-share/unixcomm.c: If the TIOCEXCL flags exists set serial line
for exclusive use.
2000-02-24 Kevin Buettner <kevinb@redhat.com>
* ppc-linux-tdep.c (ppc_sysv_abi_push_arguments): Put address
of return structure in r3 if necessary.
(ppc_linux_memory_remove_breakpoints): New function.
* rs6000-tdep.c (skip_prologue): Make sure that the cases
for storing either cr or lr to the stack only handle those
cases. (I.e, don't let these cases match 0x00000000 which is
found found in the shared library trampoline prior to the
loading of the shared library.)
* config/powerpc/tm-linux.h (ppc_linux_memory_remove_breakpoint):
Declare.
(MEMORY_REMOVE_BREAKPOINT): Define.
Wed Feb 23 23:27:48 2000 Andrew Cagney <cagney@behemoth.cygnus.com>
* hppah-nat.c: Include "gdb_wait.h" instead of <wait.h>.
Thu Feb 24 18:42:15 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Set to
$(SUBDIR_*_INSTALL) when so configured.
* configure: Regenerate.
* Makefile.in (CONFIG_INSTALL, CONFIG_UNINSTALL): Define using
configure.
(install-only): Add dependency on $(CONFIG_INSTALL). Delete code
installing GDBtk.
(uninstall): Add dependency on $(CONFIG_UNINSTALL).
(SUBDIR_MI_INSTALL, SUBDIR_MI_UNINSTALL, SUBDIR_GDBTK_UNINSTALL,
SUBDIR_GDBTK_INSTALL): Define.
(install-gdbtk): New target.
Thu Feb 24 18:19:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (SUBDIR_MI_CFLAGS): Fix typo, wrong brace.
* configure: Regenerate.
2000-02-24 Christopher Faylor <cgf@cygnus.com>
* configure.tgt: Add arm, mips, sh wince targets.
* config/arm/tm-wince.h: New file.
* config/arm/wince.mt New file.
* config/sh/tm-wince.h: New file.
* config/sh/wince.mt New file.
* config/mips/tm-wince.h: New file.
* config/mips/wince.mt New file.
* wince.c: New file.
* wince-stub.c: New file.
* wince-stub.h: New file.
* sh-tdep.c: Use correct register names for Windows CE.
Wed Feb 23 19:01:45 EST 2000 Nicholas Duffek <nsd@cygnus.com>
* top.c (SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Update comments.
(error_return, quit_return): Merge into catch_return pointer.
(return_to_top_level): Update comment. Longjmp to *catch_errors,
and communicate reason to catch_errors via setjmp return value.
(catch_errors): Always catch both quit and error, and if a catch
wasn't requested by caller, throw it to the next catch_error.
Replace dual longjmp buffer memcpy with single pointer change.
Add FIXME for possibly adding new interface to tell caller what
event was caught. Add extensive comments.
* defs.h (enum return_reason): Reserve 0 for use as initial
setjmp() return value.
(RETURN_MASK): New public macro to generate RETURN_MASK_* from
enum return_reason.
(RETURN_MASK_QUIT, RETURN_MASK_ERROR): Define using RETURN_MASK.
2000-02-23 Fernando Nasser <fnasser@cygnus.com>
* infcmd.c (run_stack_dummy): Do not pop frame on random signal.
* valops.c (_initialize_valops): Add command "set unwindonsignal".
(hand_function_call): Test for unwind_on_signal and act accordingly.
Wed Feb 23 12:58:46 2000 Andrew Cagney <cagney@b1.cygnus.com>
* gdbarch.sh (dis_asm_read_memory): Change LEN to unsigned long.
Match ../include/dis-asm.h change.
* gdbarch.h: Regenerate.
* corefile.c (dis_asm_read_memory): Update.
Mon Feb 21 13:57:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (CONFIG_INITS): Fix typo, was CONFIG_INIT.
(ENABLE_CFLAGS): Move initialization to start of file.
(enable-gdbmi): Add new configure option --enable-gdbmi. When
selected and an ${srcdir}/mi directory is present enable MI
interface.
* configure: Regenerate.
* Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS, SUBDIR_MI_DEPS,
SUBDIR_MI_INITS, SUBDIR_MI_LDFLAGS, SUBDIR_MI_CFLAGS): New macros.
(CONFIG_OBS, CONFIG_SRCS, CONFIG_DEPS, CONFIG_INITS,
CONFIG_LDFLAGS): New macros. Initialized by autoconf via
@CONFIG...@.
(INTERNAL_LDFLAGS, CDEPS, LINTFILES, DEPFILES, SOURCES,
INIT_FILES): Use $(CONFIG_...) instead of @CONFIG...@.
* mi: New directory. MI interface to GDB.
* defs.h (interpreter_p): Declare when UI_OUT.
* top.c (gdb_init): When interpreter_p, check that the interpreter
was recognized by one of the linked in interpreters.
* main.c (interpreter_p): Define.
(captured_main): When UI_OUT, check for ``-i <interpreter>'' option.
* event-top.c (display_gdb_prompt): When interpreter_p, assume
interpreter displays prompt.
* breakpoint.c (print_it_typical, watchpoint_check,
print_one_breakpoint, mention): When MI include additional
target status information.
* infrun.c (print_stop_reason, normal_stop): Ditto.
2000-02-22 Jim Blandy <jimb@redhat.com>
* gdbarch.sh: Make the `default' field really default to zero, as
documented.
Bring COERCE_FLOAT_TO_DOUBLE under gdbarch's control.
* valops.c (COERCE_FLOAT_TO_DOUBLE): Rework definition to be
more function-like.
(default_coerce_float_to_double, standard_coerce_float_to_double):
New functions.
(value_arg_coerce): Adjust for new definition.
* value.h (default_coerce_float_to_double,
standard_coerce_float_to_double): New declarations for the above.
* gdbarch.sh (coerce_float_to_double): New entry, replacing macro.
* gdbarch.c, gdbarch.h: Regenerated.
* tm-alpha.h, tm-fr30.h, tm-m32r.h, tm-mips.h, tm-hppa.h,
tm-rs6000.h, tm-sh.h, tm-sparc.h (COERCE_FLOAT_TO_DOUBLE): Change
definitions.
* mips-tdep.c (mips_coerce_float_to_double): Supply our own custom
function here.
(mips_gdbarch_init): Install that as our coerce_float_to_double
function.
2000-02-22 Kevin Buettner <kevinb@redhat.com>
* ppc-linux-nat.c (supply_gregset, supply_fpregset): Add return
type.
* ppc-linux-tdep.c (ppc_linux_at_sigtramp_return_path): Add
forward declaration.
* ppc-linux-tdep.c (ppc_linux_frame_saved_pc): Handle case
where the next frame is a signal handler caller.
* config/powerpc/tm-linux.h (PUSH_ARGUMENTS): Remove extraneous
undef.
(tm-linux.h): Include.
(tm-sysv4.h): Don't include (directly). config/tm-linux.h will
include this file for us.
(REALTIME_LO, REALTIME_HI): Don't define. These are defined by
config/tm-linux.h for us.
(SOFUN_ADDRESS_MAYBE_MISSING): Define.
2000-02-21 Kevin Buettner <kevinb@redhat.com>
* Makefile.in (ppc-linux-nat.c, ppc-linux-tdep.c): New files.
(ppc-linux-nat.o, ppc-linux-tdep.o): Add dependencies.
* configure.tgt (powerpc-*-linux*): Separate from powerpc-*-eabi
and like targets.
* ppc-linux-nat.c, ppc-linux-tdep.c, config/powerpc/linux.mt,
config/powerpc/nm-linux.h, config/powerpc/tm-linux.h: New files.
* config/powerpc/xm-linux.h: Substantially revised for native
port.
* config/powerpc/linux.mh (NAT_FILE): Redefine to be nm-linux.h.
(NATDEPFILES): Update list to reflect the fact that we can
now debug natively.
* rs6000-tdep.c, config/rs6000/tm-rs6000.h
(rs6000_frameless_function_invocation, rs6000_frame_saved_pc):
Renamed; The former names were lacking the rs6000_ prefix.
* rs6000-tdep.c (rs6000_frame_saved_pc): Call FRAME_CHAIN
instead of rs6000_frame_chain.
(rs6000_frame_chain): Call FRAMELESS_FUNCTION_INVOCATION instead
of rs6000_frameless_function_invocation.
2000-02-21 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
From Philippe De Muyter <phdm@macqel.be>
* event-loop.c (handle_file_event): In case of poll, enable
printing of informational message if an error/exception is
detected on the file descriptor.
2000-02-21 Jim Kingdon <kingdon@redhat.com>
* MAINTAINERS (Misc): Clarify that yes, anyone can edit web pages.
Mon Feb 21 12:50:57 2000 Andrew Cagney <cagney@b1.cygnus.com>
* buildsym.c: Include "language.h" and "expression.h" for
longest_local_hex_string_custom.
Mon Feb 21 11:17:18 2000 Andrew Cagney <cagney@b1.cygnus.com>
* gdbarch.sh: Include <gdb_wait.h> instead of <wait.h>.
* gdbarch.c: Already updated by Wed Feb 9 18:59:16 2000 Andrew
Cagney <cagney@b1.cygnus.com>.
Mon Feb 21 11:03:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Update: IA-64 - Kevin Buettner; ARM - Fernando
nasser, Jim Ingham and Scott Bambrough; GNU/Linux ARM - Scott
Bambrough; event loop - Elena Zannoni; SDS and RDI/APD protocol -
to Fernando Nasser and Jim Ingham; KOD - Fernando Nasser; MI -
Andrew Cagney, Elena Zannoni and Fernando Nasser; Web pages - Jim
Kingdon.
* MAINTAINERS: Add Nick Clifton to write after approval list.
Mon Feb 21 10:30:39 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Add note on multiple maintainers.
2000-02-19 Philippe De Muyter <phdm@macqel.be>
* cli-out.c (cli_table_header): Type of parameter `alignment' is
`enum ui_align', not `int'.
(cli_field_string, cli_field_skip): Likewise.
2000-02-18 Jim Blandy <jimb@redhat.com>
From Jimmy Guo <guo@cup.hp.com>:
* buildsym.h (add_free_pendings): Declare.
* buildsym.c (add_free_pendings): New function.
(make_blockvector): 32x64 fix using longest_local_hex_string().
(start_subfile): initialize variable 'subfile'.
2000-02-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* remote.c (remote_async_detach): Use target_mourn_inferior(), to
make sure that all is cleaned up after we disconnect from the
target.
(remote_detach): Ditto.
2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
From Rodney Brown <RodneyBrown@pmsc.com>
* ui-out.c (ui_out_set_flags): Fix typo, removing warning and
potentially harming mistake.
2000-02-17 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c: Use header file instead of extern declarations for
the {get,set}_arm_regname* functions.
2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
* configure.in: Replaces obsolete gdbtk-variable.c with
gdbtk-varobj.c.
* configure: Regenerate.
* Makefile.in: Remove obsolete/extraneous references to
gdbtk-var* files.
2000-02-16 Mark Kettenis <kettenis@gnu.org>
* target.c (do_target_signal_to_host): Do not use REALTIME_LO in
the conversion of the signal number. TARGET_SIGNAL_REALTIME_33 is
33 by definition, whereas REALTIME_LO might be 32 on systems that
have SIG32 such as Linux. Make sure that the signal number
returned is within the range specified by REALTIME_LO and
REALTIME_HI.
2000-02-16 Mark Kettenis <kettenis@gnu.org>
* configure: Regenerated.
2000-02-16 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (set_disassembly_flavor, arm_othernames,
_initialize_arm_tdep): Allows the user to choose between any of
the flavors available for the disassembly to be used in the "info
reg" command and elsewhere in gdb. It prevents having to maintain
this information in two places by using the data kept in the
opcodes directory.
2000-02-09 Mark Kettenis <kettenis@gnu.org>
* configure.in: Check for lwpid_t, psaddr_t, prgregset_t and
prfpregset_t in <sys/procfs.h>.
* config.in: Add HAVE_LWPID_T, HAVE_PSADDR_T, HAVE_PRGREGSET_T,
HAVE_PRFPREGSET_T.
* gdb_proc_service.h: Only provide typedefs for lwpid_t, psaddr_t,
prgregset_t and prfpregset_t if they are not already present.
Wed Feb 16 19:00:02 2000 Andrew Cagney <cagney@b1.cygnus.com>
From 2000-01-26 Rodney Brown <RodneyBrown@pmsc.com>:
* procfs.c: Define MERGEPID if not defined. For osf4.0e.
2000-02-15 Jason Molenda (jsm@bugshack.cygnus.com)
* Makefile.in (diststuff): Run 'diststuff' in doc/ subdir, not
'do-doc'.
2000-02-15 Kevin Buettner <kevinb@redhat.com>
Changes for AIX 4.3:
* rs6000-tdep.c (rs6000_fix_call_dummy): Set TOC register
to correct value for generic dummy frames. When using
generic dummy frames, don't attempt to write TOC value or
function to call into the call dummy.
(rs6000_push_arguments): Adapt USE_GENERIC_DUMMY_FRAMES
code to also handle the PowerOpen ABI.
(ppc_push_return_address): Enable for all ports.
* config/powerpc/tm-ppc-aix.h (USE_GENERIC_DUMMY_FRAMES,
PUSH_DUMMY_FRAME, PUSH_RETURN_ADDRESS, GET_SAVED_REGISTER,
CALL_DUMMY_BREAKPOINT_OFFSET, CALL_DUMMY_LOCATION,
CALL_DUMMY_ADDRESS, CALL_DUMMY_START_OFFSET): Override defaults
provided by generic RS6000 definitions so that call dummies
are implemented using generic dummy frames instead.
* rs6000-nat.c (store_inferior_registers): Call exec_one_dummy_insn()
prior to changing the stack pointer via ptrace(). Also, ignore
attempts to store to undefined registers that are less than
NUM_REGS.
* rs6000-tdep.c (DUMMY_FRAME_SIZE): Change size of the dummy
frame from 436 to 448 to account for alignment padding.
(rs6000_push_arguments): Obtain actual register size instead
of assuming the register is 4 bytes long. [There's still
more work to be done to totally remove the 4 byte assumption,
however.] Make sure the stack is 16 byte aligned as required
by the PowerOpen ABI. Also, make sure that small structures
passed in registers are properly aligned within the register.
2000-02-15 Jesper Skov <jskov@cygnus.co.uk>
Patch applied by Kevin Buettner <kevinb@redhat.com>
* rs6000-tdep.c (skip_prologue): skip copying of argument
registers to local variable registers.
2000-02-14 Jim Kingdon <kingdon@redhat.com>
* elfread.c (elf_symtab_read): Revert changes by Amit S. Kale. A
sym->section->index number is not a SECT_OFF_* code.
Tue Feb 15 12:07:30 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS (write after approval): Add H.J. Lu.
2000-02-14 Nick Clifton <nickc@cygnus.com>
* sh-tdep.c: Remove extraneous code.
2000-02-14 Amit S. Kale <akale@veritas.com>
* elfread.c (elf_symtab_read): Move the use of sym to after where
it is set.
Checked in by Jim Kingdon <kingdon@redhat.com>
Mon Feb 14 15:39:01 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Make Nick Duffek the UnixWare threads maintainer.
Mon Feb 14 15:20:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
From 1999-11-24 Jason Merrill <jason@casey.cygnus.com>:
* dwarf2read.c: (die_is_declaration): New fn.
(read_structure_scope): Use it.
* dwarf2read.c: (die_is_declaration): Convert to ISO-C.
2000-02-10 J.T. Conklin <jtc@redback.com>
* config/i386/nbsd.mt (GDBSERVER_DEPFILES): Add low-nbsd.o
* configure.tgt (i[3456]86-*-netbsd*): add gdbserver to
configdirs.
* gdbserver/low-nbsd.c: New file.
* gdbserver/Makefile.in: convert to autoconf.
* gdbserver/configure.in: likewise.
* gdbserver/configure: generate.
Sun Feb 13 11:21:00 2000 Andrew Cagney <cagney@b1.cygnus.com>
* CONTRIBUTE: New file. How to contribute to GDB.
Sun Feb 13 10:34:48 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Add Eli Zaretskii to djgpp maintiners. Add Kevin
Buettner to powerpc maintainers. Make Kevin Buettner the
GNU/LINUX PPC native maintainer. Add J.T. Conklin, Jim Kingdon
and Jason Molenda to write after aproval list.
Sun Feb 13 10:18:44 2000 Andrew Cagney <cagney@b1.cygnus.com>
* MAINTAINERS: Reformat. Separate into check-in categories.
Sat Feb 12 01:08:21 EST 2000 Nicholas Duffek <nsd@cygnus.com>
* uw-thread.c: Remove __FUNCTION__ GNUism.
2000-01-17 Amit S. Kale <akale@veritas.com>
* elfread.c (elf_symtab_read): Use offset for the section in which a
symbol resides, instead of .text section for calculating address of a
symbol.
Checked in by Jim Kingdon <kingdon@redhat.com>
2000-02-10 Mark Kettenis <kettenis@gnu.org>
* gnu-nat.c: Remove hackery to include <bits/waitflags.h>. It is
no longer necessary now we have gdb_wait.h.
2000-02-09 Mark Kettenis <kettenis@gnu.org>
* gnu-nat.c (proc_string): Make global.
(do_mach_notify_dead_name): Suppress dead name notifications if we
know that the task is dead.
1999-12-13 Mark Kettenis <kettenis@gnu.org>
* gnu-nat.c (inf_validate_task_sc): Get task info via proc server
instead of directly from the kernel. Add some hackery to make
sure that the info isn't influenced by suspension of the task in
the proc server itself.
2000-02-10 Jim Kingdon <kingdon@redhat.com>
* defs.h (MERGEPID): Added. Patch submitted by Andrew Hobson and
approved by Michael Snyder.
2000-02-09 Mark Kettenis <kettenis@gnu.org>
* linux-thread.c: Include defs.h before gdb_wait.h.
Wed Feb 9 18:59:16 2000 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (wait_h): Delete macro. Update all dependencies
specifying gdb_wait.h instead.
* ser-unix.c, ser-pipe.c, remote.c, remote-udi.c, remote-sds.c,
remote-os9k.c, remote-es.c, remote-rdp.c, remote-vx960.c,
remote-vx.c, remote-st.c, remote-nindy.c, remote-mm.c,
convex-xdep.c, convex-tdep.c, target.c, win32-nat.c, standalone.c,
remote-vxmips.c, remote-vxsparc.c, remote-vx68.c, remote-vx29k.c,
remote-sim.c, remote-rdi.c, remote-mips.c, remote-eb.c,
remote-e7000.c, remote-bug.c, remote-array.c, remote-adapt.c,
ppc-bdm.c, ocd.c, monitor.c, m3-nat.c, linux-thread.c,
infttrace.c, lin-thread.c, infptrace.c, gnu-nat.c, gdbarch.c,
fork-child.c, command.c: Include "gdb_wait.h" instead of <wait.h>
or <sys/wait.h>.
* nindy-share/nindy.c, nindy-share/Onindy.c: Ditto.
* gdb_wait.h: New file. Based on ../include/wait.h. Include
<sys/wait.h> or <wait.h> and then define any missing WIF macros.
Wed Feb 9 01:14:54 2000 Andrew Cagney <cagney@amy.cygnus.com>
* config/d10v/tm-d10v.h (NO_EXTRA_ALIGNMENT_NEEDED): Define.
* config/d10v/tm-d10v.h (STACK_ALIGN): Define.
(d10v_stack_align): Declare.
* d10v-tdep.c (d10v_stack_align): Define.
1999-08-23 J.T. Conklin <jtc@redback.com>
* top.c (remote_timeout): Change default to 2. Add comment
explaining history of changes to the default value.
* remote.c (_initialize_remote): Remove code that adds set/
show remotetimeout, as that's also done in top.c
1999-10-18 J.T. Conklin <jtc@redback.com>
* m32r-stub.c, sparcl-stub.c, sparclet-stub.c (handle_exception):
Return E01 instead of P01 when 'P' command fails.
2000-02-05 J.T. Conklin <jtc@redback.com>
* remote.c (putpkt_binary): Handle NAK from target stub.
2000-02-08 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* configure.in: Remove the addition of sol-thread.c to the
CONFIG_INITS list. This caused problems with init.c, because
sol-thread.c would be grepped twice for _initialize_* functions.
* configure: Ditto.
* Makefile.in: Add FIXME for init.c.
2000-02-07 Jim Kingdon <kingdon@redhat.com>
Clean up compiler warnings:
* bcache.h, bcache.c, c-valprint.c, coffread.c, stabsread.c,
stack.c, valprint.c: Change variables to unsigned.
* bcache.c: Rearrange to avoid warnings about variables not being set.
* c-lang.c, ch-lang.c, f-lang.c, m2-lang.c: Include valprint.h
rather than declaring print_max and repeat_count_threashold
ourselves (incorrectly).
* valprint.h: Do declare repeat_count_threashold.
* ch-exp.c: Use default case for internal error.
* findvar.c: Don't omit argument type.
* symtab.c: Remove unused variable.
2000-02-04 Jim Blandy <jimb@redhat.com>
* c-typeprint.c (remove_qualifiers): New function.
(c_type_print_base): Use it to remove qualifiers from C++
qualified names, not strrchr.
* c-typeprint.c (c_type_print_base): Recognize type conversion
operators by calling is_type_conversion_operator.
(is_type_conversion_operator): New function.
2000-02-04 Nick Clifton <nickc@cygnus.com>
* config/arm/tm-arm.h (LOWEST_PC): Define.
2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* infrun.c (resume): Make just one call to target_resume(), instead
of four: set up correct parameters in all the cases ahead of time,
and do call at the end.
2000-02-04 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* config/powerpc/tm-ppc-eabi.h: Define
SOFUN_ADDRESS_MAYBE_MISSING.
2000-02-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy
frames (revisited).
Fri Feb 4 22:42:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (INIT_FILES): Append CONFIG_INITS
* configure.in (CONFIG_INIT): Initialize.
(links): Link srcdir/gdbtk/library to gdbtcl2.
* gdbtcl2: Moved to gdbtk/library.
ChangeLog-gdbtk, gdbtk-cmds.c, gdbtk-hooks.c, gdbtk-variable.c,
gdbtk-varobj.c, gdbtk-wrapper.c, gdbtk-wrapper.h, gdbtk.c,
gdbtk.h: Moved to gdbtk/generic.
2000-02-03 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* printcmd.c (build_address_symbolic): New function. Returns all
the parts that are necessary to print an address in a symbolic
form.
(print_address_symbolic): Split into a printing part and an
information building part, build_address_symbolic().
* defs.h (build_address_symbolic): Export.
2000-02-03 Jim Blandy <jimb@redhat.com>
* dwarf2read.c (decode_locdesc): Add support for the DW_OP_bregx
opcode.
2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (arm_push_arguments): Fix passing of floating point
arguments on dummy frames.
2000-02-02 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (arm_pc_is_thumb_dummy): Account for large dummy frames.
(arm_pop_frame): Account fr dummy frames (as opposed to real ones).
2000-02-01 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* remote.c (getpkt_sane): New function. It is the old getpkt(),
which now returns a timeout indication.
(getpkt): New function. Wrapper for getpkt_sane(), so that return
value can still be ignored.
Tue Feb 1 18:47:31 2000 Andrew Cagney <cagney@b1.cygnus.com>
* top.c (print_gdb_version): Print ``UI_OUT'' when configured with
UI_OUT.
Tue Feb 1 00:17:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
* ui-file.c, ui-file.h: Rename gdb-file.h, gdb-file.c. Rename
``struct gdb_file'' to ``struct ui_file''. Delete typedef
GDB_FILE.
* Makefile.in: Update.
* ax-gdb.c, ax-general.c, ax.h, buildsym.c, c-lang.c, c-lang.h,
c-typeprint.c, c-valprint.c, ch-lang.c, ch-lang.h, ch-typeprint.c,
ch-valprint.c, command.c, command.h, convex-tdep.c, corefile.c,
cp-valprint.c, d10v-tdep.c, d30v-tdep.c, defs.h, expprint.c,
expression.h, f-lang.c, f-lang.h, f-typeprint.c, f-valprint.c,
frame.h, gdb-events.sh, gdb-file.c, gdb-file.h, gdbcmd.h,
gdbtypes.h, hppa-tdep.c, jv-lang.c, jv-lang.h, jv-typeprint.c,
jv-valprint.c, language.c, language.h, m2-lang.c, m2-lang.h,
m2-typeprint.c, m2-valprint.c, m3-nat.c, main.c, monitor.c,
printcmd.c, pyr-tdep.c, remote-mips.c, remote-sim.c, remote-udi.c,
remote.c, scm-lang.c, scm-lang.h, scm-valprint.c, ser-e7kpc.c,
ser-go32.c, ser-mac.c, ser-ocd.c, ser-unix.c, ser-unix.h,
serial.c, serial.h, stack.c, symfile.c, symmisc.c, tahoe-tdep.c,
target.c, target.h, top.c, top.h, typeprint.c, typeprint.h,
utils.c, v850ice.c, valprint.c, valprint.h, value.h,
config/pa/tm-hppa.h: Update.
* cli-out.c, cli-out.h, ui-out.c, ui-out.h, varobj.c: Update.
2000-01-31 Jason Molenda (jsm@bugshack.cygnus.com)
* config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh,
config/i386/i386dgux.mh, config/i386/i386sol2.mh,
config/i386/i386v4.mh, config/i386/i386v42mp.mh,
config/i386/ncr3000.mh, config/m68k/m68kv4.mh,
config/m88k/delta88v4.mh, config/mips/irix4.mh,
config/mips/irix5.mh, config/mips/mipsv4.mh,
config/powerpc/solaris.mh (NATDEPFILES): Change references to
proc_api.o, proc_events.o, proc_flags.o, and proc_why.o to
proc-api.o, proc-events.o, proc-flags.o, and proc-why.o.
Mon Jan 31 17:14:52 2000 Andrew Cagney <cagney@b1.cygnus.com>
* top.c (fputs_unfiltered_hook): Moved to tui/tui-file.c.
* main.c (captured_main): Only use the legacy tui_file code when
linking in older code such as the TUI.
* gdb-file.h, gdb-file.c: New files.
* utils.c, defs.h (struct gdb_file, gdb_file_new, gdb_file_delete,
null_file_isatty, null_file_rewind, null_file_put,
null_file_flush, null_file_write, null_file_fputs,
null_file_delete, gdb_file_data, gdb_flush, gdb_file_isatty,
gdb_file_rewind, gdb_file_put, gdb_file_write, fputs_unfiltered,
set_gdb_file_flush, set_gdb_file_isatty, set_gdb_file_rewind,
set_gdb_file_put, set_gdb_file_write, set_gdb_file_fputs,
set_gdb_file_data, struct accumulated_gdb_file,
do_gdb_file_xstrdup, gdb_file_xstrdup, struct mem_file):
mem_file_new, mem_file_delete, mem_fileopen, mem_file_rewind,
mem_file_put, mem_file_write, struct stdio_file): stdio_file_new,
stdio_file_delete, stdio_file_flush, stdio_file_write,
stdio_file_fputs, stdio_file_isatty, stdio_fileopen, gdb_fopen):
Moved to gdb-file.h and gdb-file.c.
* utils.c (enum streamtype, struct tui_stream, tui_file_new,
tui_file_delete, tui_fileopen, tui_sfileopen, tui_file_isatty,
tui_file_rewind, tui_file_put, tui_file_fputs,
tui_file_get_strbuf, tui_file_adjust_strbuf, tui_file_flush,
fputs_unfiltered_hook):
Moved to tui/tui-file.c and tui/tui-file.h.
* Makefile.in (COMMON_OBS): Add gdb-file.o, tui-file.o.
(tui-file.o, gdb-file.o): Add dependencies.
(corefile.o, main.o, utils.o, simmisc.o): Update dependencies.
* main.c: #include tui/tui-file.h.
2000-01-28 Fred Fish <fnf@cygnus.com>
* findvar.c (value_from_register): Special case handling of D10V
pointer values fetched from registers.
2000-01-28 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (thumb_skip_prologue, thumb_scan_prologue): Add
support for new style thumb prologues.
2000-01-28 Nick Clifton <nickc@redhat.com>
* arm-tdep.c: Remove extraneous dash at start of strings
introduced in previous delta.
2000-01-27 Nick Clifton <nickc@redhat.com>
* arm-tdep.c: Replace uses of arm_toggle_renames() with
parse_arm_disassembler_option().
2000-01-27 Jim Blandy <jimb@cygnus.com>
* symtab.c (decode_line_1): Don't let commas that are within
quotes or parenthesis terminate the line spec. Don't use pp when
removing the final double quote of a double-quoted string. Don't
forget to skip the opening double quote. I have no clue whether
this change is correct; probably we've just moved this function
from one buggy place to another buggy place, and never came within
an outhouse whiff of correctness.
(find_toplevel_char): New function.
2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
* arm-tdep.c (arm_push_arguments): Set the thumb mode bit when
passing the pointer to a thumb function as an argument.
2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
* remote-rdi.c (arm_rdi_mourn_inferior): Make sure breakpoints
are reinserted for another run.
2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
* cli-out.c (cli_filed_string): Test for NULL string.
2000-01-27 Fernando Nasser <fnasser@totem.to.cygnus.com>
* infcmd.c (run_stack_dummy): Account for a random signal stopping
the inferior as well as breakpoints being hit while performing an
inferior function call.
* valops.c (hand_function_call): Ditto.
2000-01-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
From Mark Kettenis <kettenis@gnu.org>
* config/i386/tm-i386gnu.h (THREAD_STATE_FLAVOR): Define to
i386_REGS_SEGS_STATE.
(HAVE_I387_REGS): Define.
(FLOAT_INFO): Remove.
* i386gnu-nat.c: Almost completely rewritten to use new i386
register layout and `float info' implementation.
* gnu-nat.c (inf_update_procs, proc_get_state, proc_string):
Move prototypes from here.
* gnu-nat.h: To here.
2000-01-24 Kevin Buettner <kevinb@redhat.com>
* utils.c (get_field, put_field): Fix buffer underruns and
overruns. Also, handle case where total_len is not evenly
divisible by 8.
(getfield): Make sure zeroing of unwanted bits occurs even
when bit field to extract does not straddle two or more
bytes.
2000-01-23 Christopher Faylor <cgf@cygnus.com>
* defs.h: Add gdb_thread_select declaration.
2000-01-23 Kevin Buettner <kevinb@redhat.com>
* linux-thread.c (_initialize_linuxthreads): Make sure that
linuxthreads_block_mask does not block SIGCHLD.
2000-01-20 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/devsw.c (openLogFile): On cygwin, set the log mode to
text so that new lines work properly.
2000-01-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* proc-utils.h: New file. Export functions from proc-*.c.
* proc_api.c: Rename to:
* proc-api.c: New file. Add include of proc-utils.h.
* proc_events.c: Rename to:
* proc-events.c: New file.
* proc_flags.c: Rename to:
* proc-flags.c: New file.
* proc_why.c: Rename to:
* proc-why.c: New file. Add include of proc-utils.h.
* procfs.c: Add includes of gdbthread.h, sys/wait.h, signal.h,
ctype.h, proc-utils.h.
(find_procinfo_or_die): Add braces to avoid ambiguous else clause.
(open_procinfo_files): Conditionalize local variable tmp, to avoid
compiler warnings.
(proc_iterate_over_mappings): Conditionalize local vars mapfd and
pathname.
(procfs_wait): Adjust format in some printf_filetered calls to
avoid compiler warnings.
(make_signal_thread_runnable): Ifdef 0. The calls to this function
are also ifdef'd 0 .
(procfs_resume): Add parentheses around '&&' operation.
(procfs_set_exec_trap): Remove unused variable.
(info_proc_cmd): Add braces to avoid ambiguous else clause.
* Makefile.in (procfs.o, proc-api.o, proc-events.o, proc-flags.o,
proc-why.o): Update dependencies.
* config/sparc/sun4sol2.mh (NATDEPFILES): Change proc_*.o files to
proc-*.o.
2000-01-17 Jason Molenda (jsm@bugshack.cygnus.com)
* configure.in (NEW_PROC_API): Fix Unixware-matching regexp.
Fix from Robert Lipe <robertl@sco.com>.
* configure: Regenerated.
2000-01-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* stack.c (print_frame_info_base): Break up into the frame info
(location) printing part and the rest (source line printing).
(print_frame): New function. Take care of printing the location
information.
Update copyright.
* infrun.c (normal_stop): Use enum values rather than integers for the
source_flag to be passed to show_and_print_stack_frame().
Update copyright.
* frame.h (print_what): New enum for 'source' argument to
print_frame_info_base(). Use this instead of obscure numbers.
Update copyright.
Sun Jan 16 17:58:00 2000 David Taylor <taylor@texas.cygnus.com>
* event-top.c (stdin_event_handler): call quit_command rather than
exit -- run cleanups, give target code a chance to say goodbye to
the target. Fixes bug where the inferior processes were left
around on Solaris (and probably elsewhere) by the testsuite.
2000-01-14 Mark Salter <msalter@cygnus.com>
* v850-tdep.c (v850_target_architecture_hook): Setup correct
machine id for disassembly.
2000-01-13 Jim Blandy <jimb@cygnus.com>
* i386-linux-nat.c (fill_gregset): Pass the correct arguments to
convert_to_regset, when regno indicates a specific register.
Thu Jan 13 23:34:17 EST 2000 Nicholas Duffek <nsd@cygnus.com>
* uw-thread.c: Document libthread.so debugging interface. Minor
comment and formatting tweaks.
(DEBUG): #define as 0 instead of 1.
(CALL_BASE): Include function name in error msg.
(libthread_stub): Adjust inferior_pid after thread exit.
(uw_thread_create_inferior): Deactivate uw_thread_ops before
asking procfs_ops to create inferior.
(libthread_init): Don't return nonlocally on error.
2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/ardi.c (negotiate_params): Fix initialization of static
variable.
2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
* remote-rdi.c (arm_rdi_open): Call arm-rdi-close() to make sure
both sides are on the same state.
2000-01-12 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/serdrv.c (find_baud_rate): Fix entries for 57600 and
115200 (minor syntax mistake).
2000-01-12 Jim Blandy <jimb@cygnus.com>
* config/sparc/tm-sun4sol2.h (MERGEPID): Provide a definition for
this here, to go along with the definitions of PIDGET and TIDGET.
2000-01-12 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* thread.c (do_captured_thread_select): New function. Switch
current thread, safely from within catch_errors().
(gdb_thread_select): New function. Switch threads safely.
(thread_command): Use gdb_thread_select().
Include ui-out.h.
(do_captured_list_thread_ids): New function.
(gdb_list_thread_ids): New function.
* defs.h (gdb_thread_select, gdb_list_thread_ids): Export.
2000-01-11 Christopher Faylor <cgf@cygnus.com>
* configure.in: Avoid linking -limagehlp unless it's a native build.
* configure: Regenerate.
* thread.cc (add_thread): Clear private data pointer here or suffer
strange behavior when it is checked for NULL later.
2000-01-09 Christopher Faylor <cgf@cygnus.com>
* win32nat.c (handle_exceptions): Handle various arithmetic exceptions.
* configure.in: Add an additional library to cygwin link.
* configure: Regenerate.
Patch from Egor Duda <deo@logos-m.ru>:
* coffread.c (coff_symfile_read): Reinstate ability to recognize "pe"
type.
2000-01-07 Michael Snyder <msnyder@cleaver.cygnus.com>
* uw-thread.c: New file to support UnixWare user-mode threads:
contributed by Nickolas Duffek <nsd@cygnus.com>.
* target.h (struct target_ops): New vector, to_extra_thread_info,
allows back-ends to give extra details in info thread display.
(target_extra_thread_info): define new macro.
(target_find_new_threads): simplify macro. Cleanup comments.
* target.c (to_extra_thread_info): default and inherit new vector.
(cleanup_target): eliminate PARAMS, break up long lines,
provide default definition for to_extra_thread_info, and
to_find_new_threads. Default to_thread_alive and to_query
to return_zero, not target_ignore (they each return int not void).
(debug_to_find_new_threads): new debug entry.
(setup_target_debug): add debug_to_find_new_threads.
* gdbthread.h: export struct thread_info, find_thread_pid, and
iterate_over_threads. Add comments. Eliminate PARAMS. Update
copyright. Add new private data pointer for use by target back-ends.
* thread.c (struct thread_info): move definition to gdbthread.h.
(find_thread_pid): new exported function for thread lookup.
(iterate_over_threads): new exported function for applying
arbitrary operations to threads. Update copyright to 2000.
(info_threads_command): use new target_extra_thread_info vector
to display extra information about each thread (if implemented).
* config/i386/tm-i386v42mp.h: remove obsolete #defines for procfs.
Add defines for PIDGET, etc.
* config/i386/tm-i386sol2.h: ditto.
* config/sparc/tm-sun4sol2.h: ditto.
* config/i386/i386v42mp.mh: add uw-thread.o to NATDEPFILES.
* testsuite/gdb.threads/pthreads.exp: Try to link with -lthread
if -lpthread and -lpthreads fail.
* procfs.c: (PIDGET, TIDGET, MERGEPID): change default to no-op.
(proc_flags): combine flags that UnixWare splits into two locations.
(proc_modify_flag): add support for PR_KLC (kill on last close).
(proc_[un]set_kill_on_last_close): new functions.
2000-01-07 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* infrun.c (normal_stop): Print out thread id when we stop.
2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
* remote.c (remote_open_1): Fix message so it does not imply a
specific syntax for serial ports, as it is OS dependent.
(remote_async_open_1): Ibid.
(init_remote_ops): Ibid.
2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/serdrv.c (SerialOpen): Use speed from "-b" argument or
"set remotebaud" command (if set) when no speed is specified on
the "target rdi" command.
2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/serdrv.c (find_baud_rate): Add entries for 57600 and
115200.
(baud_options[]): Ibid.
2000-01-06 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/unixcomm.c: Fix SERIAL_PREFIX so it matches the prefix
used by each operating system.
2000-01-06 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* breakpoint.c (until_break_command): Add an argument for the
continuation, the beginning of the cleanups set up by this
command.
(until_break_command_continuation): Do cleanups until the one
passed in as argument instead of doing all of them.
* infcmd.c (finish_command_continuation): Expect a new argument,
which indicates up to where to do cleanups. Update calls to
do_exec_cleanups to use this marker, instead of ALL_CLEANUPS.
(finish_command): Add another argument for the continuation: the
starting cleanup for this command.
2000-01-05 Fernando Nasser <fnasser@totem.to.cygnus.com>
From Grant Edwards <grante@visi.com> (original patch from Thomas
Zenker ):
* rdi-share/ardi.c: Allow interruption of interruptible
targets with a <CNTL-C>.
2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/etherdrv.c (fetch_ports): Send extra words on request
to control port to accommodate some versions of Angel.
2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/devsw.c (dumpPacket): Fix source of channel information.
Add interpretation for C Support Library packets.
2000-01-04 Fernando Nasser <fnasser@totem.to.cygnus.com>
* rdi-share/devsw.c (DevSW_Close): Remove const from argument that
is now being modified.
* rdi-share/devsw.h: Adjust declaration of the above funtion.
For older changes see ChangeLog-99
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: