c3ae2f98d0
2001-04-18 matthew green <mrg@redhat.com> * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes. (read_cp15_reg): Make non-static. (XScale_cp15_LDC): Update for write_cp15_reg() change. (XScale_cp15_MCR): Likewise. (XScale_cp15_write_reg): Likewise. (XScale_check_memacc): New function. Check for breakpoints being activated by memory accesses. Does not support the Branch Target Buffer. (XScale_set_fsr_far): New function. Set FSR and FAR for XScale. (XScale_debug_moe): New function. Set the debug Method Of Entry, if configured. (write_cp14_reg): Reset count counter if requested. * armdefs.h (struct ARMul_State): New members `LastTime' and `CP14R0_CCD' used for the timer/counters. (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS, ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD, ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2, ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2, ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT, ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X, ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT, ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New defines for XScale registers. (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype. (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition. (ARMul_Emulate32): Handle the clock counter and hardware instruction breakpoints. Call XScale_set_fsr_far() for software breakpoints and software interrupts. (LoadMult): Call XScale_set_fsr_far() for data aborts. (LoadSMult): Likewise. (StoreMult): Likewise. (StoreSMult): Likewise. * armemu.h (write_cp15_reg): Update prototype. * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime. (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13 register 0. * armvirt.c (GetWord): Call XScale_check_memacc(). (PutWord): Likewise.
1420 lines
33 KiB
C
1420 lines
33 KiB
C
/* armcopro.c -- co-processor interface: ARM6 Instruction Emulator.
|
|
Copyright (C) 1994, 2000 Advanced RISC Machines Ltd.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
|
|
|
|
#include "armdefs.h"
|
|
#include "armos.h"
|
|
#include "armemu.h"
|
|
#include "ansidecl.h"
|
|
|
|
/* Dummy Co-processors. */
|
|
|
|
static unsigned
|
|
NoCoPro3R (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned a ATTRIBUTE_UNUSED,
|
|
ARMword b ATTRIBUTE_UNUSED)
|
|
{
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
static unsigned
|
|
NoCoPro4R (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned a ATTRIBUTE_UNUSED,
|
|
ARMword b ATTRIBUTE_UNUSED,
|
|
ARMword c ATTRIBUTE_UNUSED)
|
|
{
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
static unsigned
|
|
NoCoPro4W (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned a ATTRIBUTE_UNUSED,
|
|
ARMword b ATTRIBUTE_UNUSED,
|
|
ARMword * c ATTRIBUTE_UNUSED)
|
|
{
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
/* The XScale Co-processors. */
|
|
|
|
/* Coprocessor 15: System Control. */
|
|
|
|
/* There are two sets of registers for copro 15.
|
|
One set is available when opcode_2 is 0 and
|
|
the other set when opcode_2 >= 1. */
|
|
static ARMword XScale_cp15_opcode_2_is_0_Regs[16];
|
|
static ARMword XScale_cp15_opcode_2_is_not_0_Regs[16];
|
|
/* There are also a set of breakpoint registers
|
|
which are accessed via CRm instead of opcode_2. */
|
|
static ARMword XScale_cp15_DBR1;
|
|
static ARMword XScale_cp15_DBCON;
|
|
static ARMword XScale_cp15_IBCR0;
|
|
static ARMword XScale_cp15_IBCR1;
|
|
|
|
static unsigned
|
|
XScale_cp15_init (ARMul_State * state ATTRIBUTE_UNUSED)
|
|
{
|
|
int i;
|
|
|
|
for (i = 16; i--;)
|
|
{
|
|
XScale_cp15_opcode_2_is_0_Regs[i] = 0;
|
|
XScale_cp15_opcode_2_is_not_0_Regs[i] = 0;
|
|
}
|
|
|
|
/* Initialise the processor ID. */
|
|
XScale_cp15_opcode_2_is_0_Regs[0] = 0x69052000;
|
|
|
|
/* Initialise the cache type. */
|
|
XScale_cp15_opcode_2_is_not_0_Regs[0] = 0x0B1AA1AA;
|
|
|
|
/* Initialise the ARM Control Register. */
|
|
XScale_cp15_opcode_2_is_0_Regs[1] = 0x00000078;
|
|
|
|
}
|
|
|
|
/* Check an access to a register. */
|
|
|
|
static unsigned
|
|
check_cp15_access (ARMul_State * state,
|
|
unsigned reg,
|
|
unsigned CRm,
|
|
unsigned opcode_1,
|
|
unsigned opcode_2)
|
|
{
|
|
/* Do not allow access to these register in USER mode. */
|
|
if (state->Mode == USER26MODE || state->Mode == USER32MODE)
|
|
return ARMul_CANT;
|
|
|
|
/* Opcode_1should be zero. */
|
|
if (opcode_1 != 0)
|
|
return ARMul_CANT;
|
|
|
|
/* Different register have different access requirements. */
|
|
switch (reg)
|
|
{
|
|
case 0:
|
|
case 1:
|
|
/* CRm must be 0. Opcode_2 can be anything. */
|
|
if (CRm != 0)
|
|
return ARMul_CANT;
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
/* CRm must be 0. Opcode_2 must be zero. */
|
|
if ((CRm != 0) || (opcode_2 != 0))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 4:
|
|
/* Access not allowed. */
|
|
return ARMul_CANT;
|
|
case 5:
|
|
case 6:
|
|
/* Opcode_2 must be zero. CRm must be 0. */
|
|
if ((CRm != 0) || (opcode_2 != 0))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 7:
|
|
/* Permissable combinations:
|
|
Opcode_2 CRm
|
|
0 5
|
|
0 6
|
|
0 7
|
|
1 5
|
|
1 6
|
|
1 10
|
|
4 10
|
|
5 2
|
|
6 5 */
|
|
switch (opcode_2)
|
|
{
|
|
default: return ARMul_CANT;
|
|
case 6: if (CRm != 5) return ARMul_CANT; break;
|
|
case 5: if (CRm != 2) return ARMul_CANT; break;
|
|
case 4: if (CRm != 10) return ARMul_CANT; break;
|
|
case 1: if ((CRm != 5) && (CRm != 6) && (CRm != 10)) return ARMul_CANT; break;
|
|
case 0: if ((CRm < 5) || (CRm > 7)) return ARMul_CANT; break;
|
|
}
|
|
break;
|
|
|
|
case 8:
|
|
/* Permissable combinations:
|
|
Opcode_2 CRm
|
|
0 5
|
|
0 6
|
|
0 7
|
|
1 5
|
|
1 6 */
|
|
if (opcode_2 > 1)
|
|
return ARMul_CANT;
|
|
if ((CRm < 5) || (CRm > 7))
|
|
return ARMul_CANT;
|
|
if (opcode_2 == 1 && CRm == 7)
|
|
return ARMul_CANT;
|
|
break;
|
|
case 9:
|
|
/* Opcode_2 must be zero or one. CRm must be 1 or 2. */
|
|
if ( ((CRm != 0) && (CRm != 1))
|
|
|| ((opcode_2 != 1) && (opcode_2 != 2)))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 10:
|
|
/* Opcode_2 must be zero or one. CRm must be 4 or 8. */
|
|
if ( ((CRm != 0) && (CRm != 1))
|
|
|| ((opcode_2 != 4) && (opcode_2 != 8)))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 11:
|
|
/* Access not allowed. */
|
|
return ARMul_CANT;
|
|
case 12:
|
|
/* Access not allowed. */
|
|
return ARMul_CANT;
|
|
case 13:
|
|
/* Opcode_2 must be zero. CRm must be 0. */
|
|
if ((CRm != 0) || (opcode_2 != 0))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 14:
|
|
/* Opcode_2 must be 0. CRm must be 0, 3, 4, 8 or 9. */
|
|
if (opcode_2 != 0)
|
|
return ARMul_CANT;
|
|
|
|
if ((CRm != 0) && (CRm != 3) && (CRm != 4) && (CRm != 8) && (CRm != 9))
|
|
return ARMul_CANT;
|
|
break;
|
|
case 15:
|
|
/* Opcode_2 must be zero. CRm must be 1. */
|
|
if ((CRm != 1) || (opcode_2 != 0))
|
|
return ARMul_CANT;
|
|
break;
|
|
default:
|
|
/* Should never happen. */
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
/* Store a value into one of coprocessor 15's registers. */
|
|
|
|
void
|
|
write_cp15_reg (ARMul_State * state, unsigned reg, unsigned opcode_2, unsigned CRm, ARMword value)
|
|
{
|
|
if (opcode_2)
|
|
{
|
|
switch (reg)
|
|
{
|
|
case 0: /* Cache Type. */
|
|
/* Writes are not allowed. */
|
|
return;
|
|
|
|
case 1: /* Auxillary Control. */
|
|
/* Only BITS (5, 4) and BITS (1, 0) can be written. */
|
|
value &= 0x33;
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
XScale_cp15_opcode_2_is_not_0_Regs [reg] = value;
|
|
}
|
|
else
|
|
{
|
|
switch (reg)
|
|
{
|
|
case 0: /* ID. */
|
|
/* Writes are not allowed. */
|
|
return;
|
|
|
|
case 1: /* ARM Control. */
|
|
/* Only BITS (13, 11), BITS (9, 7) and BITS (2, 0) can be written.
|
|
BITS (31, 14) and BIT (10) write as zero, BITS (6, 3) write as one. */
|
|
value &= 0x00003b87;
|
|
value |= 0x00000078;
|
|
|
|
/* Change the endianness if necessary */
|
|
if ((value & ARMul_CP15_R1_ENDIAN) !=
|
|
(XScale_cp15_opcode_2_is_0_Regs [reg] & ARMul_CP15_R1_ENDIAN))
|
|
{
|
|
state->bigendSig = value & ARMul_CP15_R1_ENDIAN;
|
|
/* Force ARMulator to notice these now. */
|
|
state->Emulate = CHANGEMODE;
|
|
}
|
|
break;
|
|
|
|
case 2: /* Translation Table Base. */
|
|
/* Only BITS (31, 14) can be written. */
|
|
value &= 0xffffc000;
|
|
break;
|
|
|
|
case 3: /* Domain Access Control. */
|
|
/* All bits writable. */
|
|
break;
|
|
|
|
case 5: /* Fault Status Register. */
|
|
/* BITS (10, 9) and BITS (7, 0) can be written. */
|
|
value &= 0x000006ff;
|
|
break;
|
|
|
|
case 6: /* Fault Address Register. */
|
|
/* All bits writable. */
|
|
break;
|
|
|
|
case 7: /* Cache Functions. */
|
|
case 8: /* TLB Operations. */
|
|
case 10: /* TLB Lock Down. */
|
|
/* Ignore writes. */
|
|
return;
|
|
|
|
case 9: /* Data Cache Lock. */
|
|
/* Only BIT (0) can be written. */
|
|
value &= 0x1;
|
|
break;
|
|
|
|
case 13: /* Process ID. */
|
|
/* Only BITS (31, 25) are writable. */
|
|
value &= 0xfe000000;
|
|
break;
|
|
|
|
case 14: /* DBR0, DBR1, DBCON, IBCR0, IBCR1 */
|
|
/* All bits can be written. Which register is accessed is
|
|
dependent upon CRm. */
|
|
switch (CRm)
|
|
{
|
|
case 0: /* DBR0 */
|
|
break;
|
|
case 3: /* DBR1 */
|
|
XScale_cp15_DBR1 = value;
|
|
break;
|
|
case 4: /* DBCON */
|
|
XScale_cp15_DBCON = value;
|
|
break;
|
|
case 8: /* IBCR0 */
|
|
XScale_cp15_IBCR0 = value;
|
|
break;
|
|
case 9: /* IBCR1 */
|
|
XScale_cp15_IBCR1 = value;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 15: /* Coprpcessor Access Register. */
|
|
/* Access is only valid if CRm == 1. */
|
|
if (CRm != 1)
|
|
return;
|
|
|
|
/* Only BITS (13, 0) may be written. */
|
|
value &= 0x00003fff;
|
|
break;
|
|
|
|
default:
|
|
return;
|
|
}
|
|
|
|
XScale_cp15_opcode_2_is_0_Regs [reg] = value;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* Return the value in a cp15 register. */
|
|
|
|
ARMword
|
|
read_cp15_reg (unsigned reg, unsigned opcode_2, unsigned CRm)
|
|
{
|
|
if (opcode_2 == 0)
|
|
{
|
|
if (reg == 15 && CRm != 1)
|
|
return 0;
|
|
|
|
if (reg == 14)
|
|
{
|
|
switch (CRm)
|
|
{
|
|
case 3: return XScale_cp15_DBR1;
|
|
case 4: return XScale_cp15_DBCON;
|
|
case 8: return XScale_cp15_IBCR0;
|
|
case 9: return XScale_cp15_IBCR1;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
return XScale_cp15_opcode_2_is_0_Regs [reg];
|
|
}
|
|
else
|
|
return XScale_cp15_opcode_2_is_not_0_Regs [reg];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_LDC (ARMul_State * state, unsigned type, ARMword instr, ARMword data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp15_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
write_cp15_reg (state, reg, 0, 0, data);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_STC (ARMul_State * state, unsigned type, ARMword instr, ARMword * data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp15_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
* data = read_cp15_reg (reg, 0, 0);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_MRC (ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword * value)
|
|
{
|
|
unsigned opcode_2 = BITS (5, 7);
|
|
unsigned CRm = BITS (0, 3);
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp15_access (state, reg, CRm, BITS (21, 23), opcode_2);
|
|
|
|
if (result == ARMul_DONE)
|
|
* value = read_cp15_reg (reg, opcode_2, CRm);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_MCR (ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword value)
|
|
{
|
|
unsigned opcode_2 = BITS (5, 7);
|
|
unsigned CRm = BITS (0, 3);
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp15_access (state, reg, CRm, BITS (21, 23), opcode_2);
|
|
|
|
if (result == ARMul_DONE)
|
|
write_cp15_reg (state, reg, opcode_2, CRm, value);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_read_reg (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword * value)
|
|
{
|
|
/* FIXME: Not sure what to do about the alternative register set
|
|
here. For now default to just accessing CRm == 0 registers. */
|
|
* value = read_cp15_reg (reg, 0, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp15_write_reg (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword value)
|
|
{
|
|
/* FIXME: Not sure what to do about the alternative register set
|
|
here. For now default to just accessing CRm == 0 registers. */
|
|
write_cp15_reg (state, reg, 0, 0, value);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/***************************************************************************\
|
|
* Check for special XScale memory access features *
|
|
\***************************************************************************/
|
|
void
|
|
XScale_check_memacc (ARMul_State * state, ARMword * address, int store)
|
|
{
|
|
ARMword dbcon, r0, r1;
|
|
int e1, e0;
|
|
|
|
if (!state->is_XScale)
|
|
return;
|
|
|
|
/* Check for PID-ification.
|
|
XXX BTB access support will require this test failing. */
|
|
r0 = (read_cp15_reg (13, 0, 0) & 0xfe000000);
|
|
if (r0 && (*address & 0xfe000000) == 0)
|
|
*address |= r0;
|
|
|
|
/* Check alignment fault enable/disable. */
|
|
if ((read_cp15_reg (1, 0, 0) & ARMul_CP15_R1_ALIGN) && (*address & 3))
|
|
ARMul_Abort (state, ARMul_DataAbortV);
|
|
|
|
if (XScale_debug_moe (state, -1))
|
|
return;
|
|
|
|
/* Check the data breakpoint registers. */
|
|
dbcon = read_cp15_reg (14, 0, 4);
|
|
r0 = read_cp15_reg (14, 0, 0);
|
|
r1 = read_cp15_reg (14, 0, 3);
|
|
e0 = dbcon & ARMul_CP15_DBCON_E0;
|
|
|
|
if (dbcon & ARMul_CP15_DBCON_M)
|
|
{
|
|
/* r1 is a inverse mask. */
|
|
if (e0 != 0 && ((store && e0 != 3) || (!store && e0 != 1))
|
|
&& ((*address & ~r1) == (r0 & ~r1)))
|
|
{
|
|
XScale_debug_moe (state, ARMul_CP14_R10_MOE_DB);
|
|
ARMul_OSHandleSWI (state, SWI_Breakpoint);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (e0 != 0 && ((store && e0 != 3) || (!store && e0 != 1))
|
|
&& ((*address & ~3) == (r0 & ~3)))
|
|
{
|
|
XScale_debug_moe (state, ARMul_CP14_R10_MOE_DB);
|
|
ARMul_OSHandleSWI (state, SWI_Breakpoint);
|
|
}
|
|
|
|
e1 = (dbcon & ARMul_CP15_DBCON_E1) >> 2;
|
|
if (e1 != 0 && ((store && e1 != 3) || (!store && e1 != 1))
|
|
&& ((*address & ~3) == (r1 & ~3)))
|
|
{
|
|
XScale_debug_moe (state, ARMul_CP14_R10_MOE_DB);
|
|
ARMul_OSHandleSWI (state, SWI_Breakpoint);
|
|
}
|
|
}
|
|
}
|
|
|
|
/***************************************************************************\
|
|
* Check set
|
|
\***************************************************************************/
|
|
void
|
|
XScale_set_fsr_far(ARMul_State * state, ARMword fsr, ARMword far)
|
|
{
|
|
if (!state->is_XScale || (read_cp14_reg (10) & (1UL << 31)) == 0)
|
|
return;
|
|
|
|
write_cp15_reg (state, 5, 0, 0, fsr);
|
|
write_cp15_reg (state, 6, 0, 0, far);
|
|
}
|
|
|
|
/* Set the XScale debug `method of entry' if it is enabled. */
|
|
int
|
|
XScale_debug_moe (ARMul_State * state, int moe)
|
|
{
|
|
ARMword value;
|
|
|
|
if (!state->is_XScale)
|
|
return 1;
|
|
|
|
value = read_cp14_reg (10);
|
|
if (value & (1UL << 31))
|
|
{
|
|
if (moe != -1)
|
|
{
|
|
value &= ~0x1c;
|
|
value |= moe;
|
|
|
|
write_cp14_reg (10, value);
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Coprocessor 13: Interrupt Controller and Bus Controller. */
|
|
|
|
/* There are two sets of registers for copro 13.
|
|
One set (of three registers) is available when CRm is 0
|
|
and the other set (of six registers) when CRm is 1. */
|
|
|
|
static ARMword XScale_cp13_CR0_Regs[16];
|
|
static ARMword XScale_cp13_CR1_Regs[16];
|
|
|
|
static unsigned
|
|
XScale_cp13_init (ARMul_State * state ATTRIBUTE_UNUSED)
|
|
{
|
|
int i;
|
|
|
|
for (i = 16; i--;)
|
|
{
|
|
XScale_cp13_CR0_Regs[i] = 0;
|
|
XScale_cp13_CR1_Regs[i] = 0;
|
|
}
|
|
}
|
|
|
|
/* Check an access to a register. */
|
|
|
|
static unsigned
|
|
check_cp13_access (ARMul_State * state,
|
|
unsigned reg,
|
|
unsigned CRm,
|
|
unsigned opcode_1,
|
|
unsigned opcode_2)
|
|
{
|
|
/* Do not allow access to these register in USER mode. */
|
|
if (state->Mode == USER26MODE || state->Mode == USER32MODE)
|
|
return ARMul_CANT;
|
|
|
|
/* The opcodes should be zero. */
|
|
if ((opcode_1 != 0) || (opcode_2 != 0))
|
|
return ARMul_CANT;
|
|
|
|
/* Do not allow access to these register if bit 13 of coprocessor
|
|
15's register 15 is zero. */
|
|
if ((XScale_cp15_opcode_2_is_0_Regs[15] & (1 << 13)) == 0)
|
|
return ARMul_CANT;
|
|
|
|
/* Registers 0, 4 and 8 are defined when CRm == 0.
|
|
Registers 0, 4, 5, 6, 7, 8 are defined when CRm == 1.
|
|
For all other CRm values undefined behaviour results. */
|
|
if (CRm == 0)
|
|
{
|
|
if (reg == 0 || reg == 4 || reg == 8)
|
|
return ARMul_DONE;
|
|
}
|
|
else if (CRm == 1)
|
|
{
|
|
if (reg == 0 || (reg >= 4 && reg <= 8))
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
/* Store a value into one of coprocessor 13's registers. */
|
|
|
|
static void
|
|
write_cp13_reg (unsigned reg, unsigned CRm, ARMword value)
|
|
{
|
|
switch (CRm)
|
|
{
|
|
case 0:
|
|
switch (reg)
|
|
{
|
|
case 0: /* INTCTL */
|
|
/* Only BITS (3:0) can be written. */
|
|
value &= 0xf;
|
|
break;
|
|
|
|
case 4: /* INTSRC */
|
|
/* No bits may be written. */
|
|
return;
|
|
|
|
case 8: /* INTSTR */
|
|
/* Only BITS (1:0) can be written. */
|
|
value &= 0x3;
|
|
break;
|
|
|
|
default:
|
|
/* Should not happen. Ignore any writes to unimplemented registers. */
|
|
return;
|
|
}
|
|
|
|
XScale_cp13_CR0_Regs [reg] = value;
|
|
break;
|
|
|
|
case 1:
|
|
switch (reg)
|
|
{
|
|
case 0: /* BCUCTL */
|
|
/* Only BITS (30:28) and BITS (3:0) can be written.
|
|
BIT(31) is write ignored. */
|
|
value &= 0x7000000f;
|
|
value |= XScale_cp13_CR1_Regs[0] & (1UL << 31);
|
|
break;
|
|
|
|
case 4: /* ELOG0 */
|
|
case 5: /* ELOG1 */
|
|
case 6: /* ECAR0 */
|
|
case 7: /* ECAR1 */
|
|
/* No bits can be written. */
|
|
return;
|
|
|
|
case 8: /* ECTST */
|
|
/* Only BITS (7:0) can be written. */
|
|
value &= 0xff;
|
|
break;
|
|
|
|
default:
|
|
/* Should not happen. Ignore any writes to unimplemented registers. */
|
|
return;
|
|
}
|
|
|
|
XScale_cp13_CR1_Regs [reg] = value;
|
|
break;
|
|
|
|
default:
|
|
/* Should not happen. */
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/* Return the value in a cp13 register. */
|
|
|
|
static ARMword
|
|
read_cp13_reg (unsigned reg, unsigned CRm)
|
|
{
|
|
if (CRm == 0)
|
|
return XScale_cp13_CR0_Regs [reg];
|
|
else if (CRm == 1)
|
|
return XScale_cp13_CR1_Regs [reg];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_LDC (ARMul_State * state, unsigned type, ARMword instr, ARMword data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp13_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
write_cp13_reg (reg, 0, data);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_STC (ARMul_State * state, unsigned type, ARMword instr, ARMword * data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp13_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
* data = read_cp13_reg (reg, 0);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_MRC (ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword * value)
|
|
{
|
|
unsigned CRm = BITS (0, 3);
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp13_access (state, reg, CRm, BITS (21, 23), BITS (5, 7));
|
|
|
|
if (result == ARMul_DONE)
|
|
* value = read_cp13_reg (reg, CRm);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_MCR (ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword value)
|
|
{
|
|
unsigned CRm = BITS (0, 3);
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp13_access (state, reg, CRm, BITS (21, 23), BITS (5, 7));
|
|
|
|
if (result == ARMul_DONE)
|
|
write_cp13_reg (reg, CRm, value);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_read_reg
|
|
(
|
|
ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword * value
|
|
)
|
|
{
|
|
/* FIXME: Not sure what to do about the alternative register set
|
|
here. For now default to just accessing CRm == 0 registers. */
|
|
* value = read_cp13_reg (reg, 0);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp13_write_reg
|
|
(
|
|
ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword value
|
|
)
|
|
{
|
|
/* FIXME: Not sure what to do about the alternative register set
|
|
here. For now default to just accessing CRm == 0 registers. */
|
|
write_cp13_reg (reg, 0, value);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Coprocessor 14: Performance Monitoring, Clock and Power management,
|
|
Software Debug. */
|
|
|
|
static ARMword XScale_cp14_Regs[16];
|
|
|
|
static unsigned
|
|
XScale_cp14_init (ARMul_State * state ATTRIBUTE_UNUSED)
|
|
{
|
|
int i;
|
|
|
|
for (i = 16; i--;)
|
|
XScale_cp14_Regs[i] = 0;
|
|
}
|
|
|
|
/* Check an access to a register. */
|
|
|
|
static unsigned
|
|
check_cp14_access (ARMul_State * state,
|
|
unsigned reg,
|
|
unsigned CRm,
|
|
unsigned opcode1,
|
|
unsigned opcode2)
|
|
{
|
|
/* Not allowed to access these register in USER mode. */
|
|
if (state->Mode == USER26MODE || state->Mode == USER32MODE)
|
|
return ARMul_CANT;
|
|
|
|
/* CRm should be zero. */
|
|
if (CRm != 0)
|
|
return ARMul_CANT;
|
|
|
|
/* OPcodes should be zero. */
|
|
if (opcode1 != 0 || opcode2 != 0)
|
|
return ARMul_CANT;
|
|
|
|
/* Accessing registers 4 or 5 has unpredicatable results. */
|
|
if (reg >= 4 && reg <= 5)
|
|
return ARMul_CANT;
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
/* Store a value into one of coprocessor 14's registers. */
|
|
|
|
void
|
|
write_cp14_reg (unsigned reg, ARMword value)
|
|
{
|
|
switch (reg)
|
|
{
|
|
case 0: /* PMNC */
|
|
/* Only BITS (27:12), BITS (10:8) and BITS (6:0) can be written. */
|
|
value &= 0x0ffff77f;
|
|
|
|
/* Reset the clock counter if necessary */
|
|
if (value & ARMul_CP14_R0_CLKRST)
|
|
XScale_cp14_Regs [1] = 0;
|
|
break;
|
|
|
|
case 4:
|
|
case 5:
|
|
/* We should not normally reach this code. The debugger interface
|
|
can bypass the normal checks though, so it could happen. */
|
|
value = 0;
|
|
break;
|
|
|
|
case 6: /* CCLKCFG */
|
|
/* Only BITS (3:0) can be written. */
|
|
value &= 0xf;
|
|
break;
|
|
|
|
case 7: /* PWRMODE */
|
|
/* Although BITS (1:0) can be written with non-zero values, this would
|
|
have the side effect of putting the processor to sleep. Thus in
|
|
order for the register to be read again, it would have to go into
|
|
ACTIVE mode, which means that any read will see these bits as zero.
|
|
|
|
Rather than trying to implement complex reset-to-zero-upon-read logic
|
|
we just override the write value with zero. */
|
|
value = 0;
|
|
break;
|
|
|
|
case 10: /* DCSR */
|
|
/* Only BITS (31:30), BITS (23:22), BITS (20:16) and BITS (5:0) can
|
|
be written. */
|
|
value &= 0xc0df003f;
|
|
break;
|
|
|
|
case 11: /* TBREG */
|
|
/* No writes are permitted. */
|
|
value = 0;
|
|
break;
|
|
|
|
case 14: /* TXRXCTRL */
|
|
/* Only BITS (31:30) can be written. */
|
|
value &= 0xc0000000;
|
|
break;
|
|
|
|
default:
|
|
/* All bits can be written. */
|
|
break;
|
|
}
|
|
|
|
XScale_cp14_Regs [reg] = value;
|
|
}
|
|
|
|
/* Return the value in a cp14 register. Not a static function since
|
|
it is used by the code to emulate the BKPT instruction in armemu.c. */
|
|
|
|
ARMword
|
|
read_cp14_reg (unsigned reg)
|
|
{
|
|
return XScale_cp14_Regs [reg];
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_LDC (ARMul_State * state, unsigned type, ARMword instr, ARMword data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp14_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
write_cp14_reg (reg, data);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_STC (ARMul_State * state, unsigned type, ARMword instr, ARMword * data)
|
|
{
|
|
unsigned reg = BITS (12, 15);
|
|
unsigned result;
|
|
|
|
result = check_cp14_access (state, reg, 0, 0, 0);
|
|
|
|
if (result == ARMul_DONE && type == ARMul_DATA)
|
|
* data = read_cp14_reg (reg);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_MRC
|
|
(
|
|
ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword * value
|
|
)
|
|
{
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp14_access (state, reg, BITS (0, 3), BITS (21, 23), BITS (5, 7));
|
|
|
|
if (result == ARMul_DONE)
|
|
* value = read_cp14_reg (reg);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_MCR
|
|
(
|
|
ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword value
|
|
)
|
|
{
|
|
unsigned reg = BITS (16, 19);
|
|
unsigned result;
|
|
|
|
result = check_cp14_access (state, reg, BITS (0, 3), BITS (21, 23), BITS (5, 7));
|
|
|
|
if (result == ARMul_DONE)
|
|
write_cp14_reg (reg, value);
|
|
|
|
return result;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_read_reg
|
|
(
|
|
ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword * value
|
|
)
|
|
{
|
|
* value = read_cp14_reg (reg);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static unsigned
|
|
XScale_cp14_write_reg
|
|
(
|
|
ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned reg,
|
|
ARMword value
|
|
)
|
|
{
|
|
write_cp14_reg (reg, value);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/* Here's ARMulator's MMU definition. A few things to note:
|
|
1) It has eight registers, but only two are defined.
|
|
2) You can only access its registers with MCR and MRC.
|
|
3) MMU Register 0 (ID) returns 0x41440110
|
|
4) Register 1 only has 4 bits defined. Bits 0 to 3 are unused, bit 4
|
|
controls 32/26 bit program space, bit 5 controls 32/26 bit data space,
|
|
bit 6 controls late abort timimg and bit 7 controls big/little endian. */
|
|
|
|
static ARMword MMUReg[8];
|
|
|
|
static unsigned
|
|
MMUInit (ARMul_State * state)
|
|
{
|
|
MMUReg[1] = state->prog32Sig << 4 |
|
|
state->data32Sig << 5 | state->lateabtSig << 6 | state->bigendSig << 7;
|
|
|
|
ARMul_ConsolePrint (state, ", MMU present");
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static unsigned
|
|
MMUMRC (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword * value)
|
|
{
|
|
int reg = BITS (16, 19) & 7;
|
|
|
|
if (reg == 0)
|
|
*value = 0x41440110;
|
|
else
|
|
*value = MMUReg[reg];
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
MMUMCR (ARMul_State * state,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword value)
|
|
{
|
|
int reg = BITS (16, 19) & 7;
|
|
|
|
MMUReg[reg] = value;
|
|
|
|
if (reg == 1)
|
|
{
|
|
ARMword p,d,l,b;
|
|
|
|
p = state->prog32Sig;
|
|
d = state->data32Sig;
|
|
l = state->lateabtSig;
|
|
b = state->bigendSig;
|
|
|
|
state->prog32Sig = value >> 4 & 1;
|
|
state->data32Sig = value >> 5 & 1;
|
|
state->lateabtSig = value >> 6 & 1;
|
|
state->bigendSig = value >> 7 & 1;
|
|
|
|
if ( p != state->prog32Sig
|
|
|| d != state->data32Sig
|
|
|| l != state->lateabtSig
|
|
|| b != state->bigendSig)
|
|
/* Force ARMulator to notice these now. */
|
|
state->Emulate = CHANGEMODE;
|
|
}
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
MMURead (ARMul_State * state ATTRIBUTE_UNUSED, unsigned reg, ARMword * value)
|
|
{
|
|
if (reg == 0)
|
|
*value = 0x41440110;
|
|
else if (reg < 8)
|
|
*value = MMUReg[reg];
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
static unsigned
|
|
MMUWrite (ARMul_State * state, unsigned reg, ARMword value)
|
|
{
|
|
if (reg < 8)
|
|
MMUReg[reg] = value;
|
|
|
|
if (reg == 1)
|
|
{
|
|
ARMword p,d,l,b;
|
|
|
|
p = state->prog32Sig;
|
|
d = state->data32Sig;
|
|
l = state->lateabtSig;
|
|
b = state->bigendSig;
|
|
|
|
state->prog32Sig = value >> 4 & 1;
|
|
state->data32Sig = value >> 5 & 1;
|
|
state->lateabtSig = value >> 6 & 1;
|
|
state->bigendSig = value >> 7 & 1;
|
|
|
|
if ( p != state->prog32Sig
|
|
|| d != state->data32Sig
|
|
|| l != state->lateabtSig
|
|
|| b != state->bigendSig)
|
|
/* Force ARMulator to notice these now. */
|
|
state->Emulate = CHANGEMODE;
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
/* What follows is the Validation Suite Coprocessor. It uses two
|
|
co-processor numbers (4 and 5) and has the follwing functionality.
|
|
Sixteen registers. Both co-processor nuimbers can be used in an MCR
|
|
and MRC to access these registers. CP 4 can LDC and STC to and from
|
|
the registers. CP 4 and CP 5 CDP 0 will busy wait for the number of
|
|
cycles specified by a CP register. CP 5 CDP 1 issues a FIQ after a
|
|
number of cycles (specified in a CP register), CDP 2 issues an IRQW
|
|
in the same way, CDP 3 and 4 turn of the FIQ and IRQ source, and CDP 5
|
|
stores a 32 bit time value in a CP register (actually it's the total
|
|
number of N, S, I, C and F cyles). */
|
|
|
|
static ARMword ValReg[16];
|
|
|
|
static unsigned
|
|
ValLDC (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned type,
|
|
ARMword instr,
|
|
ARMword data)
|
|
{
|
|
static unsigned words;
|
|
|
|
if (type != ARMul_DATA)
|
|
words = 0;
|
|
else
|
|
{
|
|
ValReg[BITS (12, 15)] = data;
|
|
|
|
if (BIT (22))
|
|
/* It's a long access, get two words. */
|
|
if (words++ != 4)
|
|
return ARMul_INC;
|
|
}
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
ValSTC (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned type,
|
|
ARMword instr,
|
|
ARMword * data)
|
|
{
|
|
static unsigned words;
|
|
|
|
if (type != ARMul_DATA)
|
|
words = 0;
|
|
else
|
|
{
|
|
* data = ValReg[BITS (12, 15)];
|
|
|
|
if (BIT (22))
|
|
/* It's a long access, get two words. */
|
|
if (words++ != 4)
|
|
return ARMul_INC;
|
|
}
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
ValMRC (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword * value)
|
|
{
|
|
*value = ValReg[BITS (16, 19)];
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
ValMCR (ARMul_State * state ATTRIBUTE_UNUSED,
|
|
unsigned type ATTRIBUTE_UNUSED,
|
|
ARMword instr,
|
|
ARMword value)
|
|
{
|
|
ValReg[BITS (16, 19)] = value;
|
|
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
static unsigned
|
|
ValCDP (ARMul_State * state, unsigned type, ARMword instr)
|
|
{
|
|
static unsigned long finish = 0;
|
|
|
|
if (BITS (20, 23) != 0)
|
|
return ARMul_CANT;
|
|
|
|
if (type == ARMul_FIRST)
|
|
{
|
|
ARMword howlong;
|
|
|
|
howlong = ValReg[BITS (0, 3)];
|
|
|
|
/* First cycle of a busy wait. */
|
|
finish = ARMul_Time (state) + howlong;
|
|
|
|
return howlong == 0 ? ARMul_DONE : ARMul_BUSY;
|
|
}
|
|
else if (type == ARMul_BUSY)
|
|
{
|
|
if (ARMul_Time (state) >= finish)
|
|
return ARMul_DONE;
|
|
else
|
|
return ARMul_BUSY;
|
|
}
|
|
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
static unsigned
|
|
DoAFIQ (ARMul_State * state)
|
|
{
|
|
state->NfiqSig = LOW;
|
|
state->Exception++;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
DoAIRQ (ARMul_State * state)
|
|
{
|
|
state->NirqSig = LOW;
|
|
state->Exception++;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned
|
|
IntCDP (ARMul_State * state, unsigned type, ARMword instr)
|
|
{
|
|
static unsigned long finish;
|
|
ARMword howlong;
|
|
|
|
howlong = ValReg[BITS (0, 3)];
|
|
|
|
switch ((int) BITS (20, 23))
|
|
{
|
|
case 0:
|
|
if (type == ARMul_FIRST)
|
|
{
|
|
/* First cycle of a busy wait. */
|
|
finish = ARMul_Time (state) + howlong;
|
|
|
|
return howlong == 0 ? ARMul_DONE : ARMul_BUSY;
|
|
}
|
|
else if (type == ARMul_BUSY)
|
|
{
|
|
if (ARMul_Time (state) >= finish)
|
|
return ARMul_DONE;
|
|
else
|
|
return ARMul_BUSY;
|
|
}
|
|
return ARMul_DONE;
|
|
|
|
case 1:
|
|
if (howlong == 0)
|
|
ARMul_Abort (state, ARMul_FIQV);
|
|
else
|
|
ARMul_ScheduleEvent (state, howlong, DoAFIQ);
|
|
return ARMul_DONE;
|
|
|
|
case 2:
|
|
if (howlong == 0)
|
|
ARMul_Abort (state, ARMul_IRQV);
|
|
else
|
|
ARMul_ScheduleEvent (state, howlong, DoAIRQ);
|
|
return ARMul_DONE;
|
|
|
|
case 3:
|
|
state->NfiqSig = HIGH;
|
|
state->Exception--;
|
|
return ARMul_DONE;
|
|
|
|
case 4:
|
|
state->NirqSig = HIGH;
|
|
state->Exception--;
|
|
return ARMul_DONE;
|
|
|
|
case 5:
|
|
ValReg[BITS (0, 3)] = ARMul_Time (state);
|
|
return ARMul_DONE;
|
|
}
|
|
|
|
return ARMul_CANT;
|
|
}
|
|
|
|
/***************************************************************************\
|
|
* Install co-processor instruction handlers in this routine *
|
|
\***************************************************************************/
|
|
|
|
unsigned
|
|
ARMul_CoProInit (ARMul_State * state)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Initialise tham all first. */
|
|
for (i = 0; i < 16; i++)
|
|
ARMul_CoProDetach (state, i);
|
|
|
|
/* Install CoPro Instruction handlers here.
|
|
The format is:
|
|
ARMul_CoProAttach (state, CP Number,
|
|
Init routine, Exit routine
|
|
LDC routine, STC routine,
|
|
MRC routine, MCR routine,
|
|
CDP routine,
|
|
Read Reg routine, Write Reg routine). */
|
|
ARMul_CoProAttach (state, 4, NULL, NULL,
|
|
ValLDC, ValSTC, ValMRC, ValMCR, ValCDP, NULL, NULL);
|
|
|
|
ARMul_CoProAttach (state, 5, NULL, NULL,
|
|
NULL, NULL, ValMRC, ValMCR, IntCDP, NULL, NULL);
|
|
|
|
ARMul_CoProAttach (state, 15, MMUInit, NULL,
|
|
NULL, NULL, MMUMRC, MMUMCR, NULL, MMURead, MMUWrite);
|
|
|
|
ARMul_CoProAttach (state, 13, XScale_cp13_init, NULL,
|
|
XScale_cp13_LDC, XScale_cp13_STC, XScale_cp13_MRC,
|
|
XScale_cp13_MCR, NULL, XScale_cp13_read_reg,
|
|
XScale_cp13_write_reg);
|
|
|
|
ARMul_CoProAttach (state, 14, XScale_cp14_init, NULL,
|
|
XScale_cp14_LDC, XScale_cp14_STC, XScale_cp14_MRC,
|
|
XScale_cp14_MCR, NULL, XScale_cp14_read_reg,
|
|
XScale_cp14_write_reg);
|
|
|
|
ARMul_CoProAttach (state, 15, XScale_cp15_init, NULL,
|
|
NULL, NULL, XScale_cp15_MRC, XScale_cp15_MCR,
|
|
NULL, XScale_cp15_read_reg, XScale_cp15_write_reg);
|
|
|
|
/* No handlers below here. */
|
|
|
|
/* Call all the initialisation routines. */
|
|
for (i = 0; i < 16; i++)
|
|
if (state->CPInit[i])
|
|
(state->CPInit[i]) (state);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/***************************************************************************\
|
|
* Install co-processor finalisation routines in this routine *
|
|
\***************************************************************************/
|
|
|
|
void
|
|
ARMul_CoProExit (ARMul_State * state)
|
|
{
|
|
register unsigned i;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
if (state->CPExit[i])
|
|
(state->CPExit[i]) (state);
|
|
|
|
for (i = 0; i < 16; i++) /* Detach all handlers. */
|
|
ARMul_CoProDetach (state, i);
|
|
}
|
|
|
|
/***************************************************************************\
|
|
* Routines to hook Co-processors into ARMulator *
|
|
\***************************************************************************/
|
|
|
|
void
|
|
ARMul_CoProAttach (ARMul_State * state,
|
|
unsigned number,
|
|
ARMul_CPInits * init,
|
|
ARMul_CPExits * exit,
|
|
ARMul_LDCs * ldc,
|
|
ARMul_STCs * stc,
|
|
ARMul_MRCs * mrc,
|
|
ARMul_MCRs * mcr,
|
|
ARMul_CDPs * cdp,
|
|
ARMul_CPReads * read,
|
|
ARMul_CPWrites * write)
|
|
{
|
|
if (init != NULL)
|
|
state->CPInit[number] = init;
|
|
if (exit != NULL)
|
|
state->CPExit[number] = exit;
|
|
if (ldc != NULL)
|
|
state->LDC[number] = ldc;
|
|
if (stc != NULL)
|
|
state->STC[number] = stc;
|
|
if (mrc != NULL)
|
|
state->MRC[number] = mrc;
|
|
if (mcr != NULL)
|
|
state->MCR[number] = mcr;
|
|
if (cdp != NULL)
|
|
state->CDP[number] = cdp;
|
|
if (read != NULL)
|
|
state->CPRead[number] = read;
|
|
if (write != NULL)
|
|
state->CPWrite[number] = write;
|
|
}
|
|
|
|
void
|
|
ARMul_CoProDetach (ARMul_State * state, unsigned number)
|
|
{
|
|
ARMul_CoProAttach (state, number, NULL, NULL,
|
|
NoCoPro4R, NoCoPro4W, NoCoPro4W, NoCoPro4R,
|
|
NoCoPro3R, NULL, NULL);
|
|
|
|
state->CPInit[number] = NULL;
|
|
state->CPExit[number] = NULL;
|
|
state->CPRead[number] = NULL;
|
|
state->CPWrite[number] = NULL;
|
|
}
|