old-cross-binutils/gdb/ChangeLog
2005-06-04 06:29:06 +00:00

3880 lines
149 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2005-06-04 Richard Sandiford <rsandifo@nildram.co.uk>
* MAINTAINERS: Update my email address.
2005-06-03 Joel Brobecker <brobecker@adacore.com>
* symmisc.c (dump_symtab_1): Renamed from dump_symtab.
(dump_symtab): New function.
2005-04-02 Joel Brobecker <brobecker@adacore.com>
* exceptions.h: Include ui-out.h.
(ui_out): Remove declaration.
* Makefile.in (exceptions_h): Add dependency on ui-out.h.
2005-05-30 Andrew Cagney <cagney@gnu.org>
* MAINTAINERS (Can Commit Without Approval): New section,
previously burried under "Target Instruction Set Architectures".
Note that cagney "can commit" changes to powerpc-linux.
* MAINTAINERS: Drop architecture and target vectors.
2005-05-29 Eli Zaretskii <eliz@gnu.org>
* config/djgpp/fnchange.lst: Add mappings for linux-ppc-low.c and
linux-ppc64-low.c.
2005-05-28 Bob Rossi <bob@brasko.net>
* Makefile.in (SUBDIR_MI_OBS, SUBDIR_MI_SRCS): Add mi-common.
(gdb/mi/ headers): Add mi_common_h.
(breakpoint.o, infrun.o): Add dependencies mi_common_h.
* breakpoint.c (include): Add include 'mi/mi-common.h'.
(print_it_typical): Use async_reason_lookup.
(watchpoint_check): Ditto.
* infrun.c (include): Add include 'mi/mi-common.h'.
(print_stop_reason): Use async_reason_lookup.
* mi/mi-common.h: New file.
* mi/mi-common.c: Ditto.
2005-05-29 Joel Brobecker <brobecker@adacore.com>
* alpha-tdep.c (alpha_next_pc): Use correct register number
for floating-point branch instructions.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
Jonathan Larmour <jifl@eCosCentric.com>
PR backtrace/1760
* frame.c (backtrace_limit): Change type to int.
(get_prev_frame): Update backtrace limit support.
(_initialize_frame): Use add_setshow_integer_cmd for backtrace_limit.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
* configure.tgt (powerpc64-*-linux*): Enable gdbserver.
* regformats/reg-ppc64.dat: New file.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
From Wu Zhou <woodzltc@cn.ibm.com>:
* remote.c (struct gdb_ext_thread_info): Fix a comment typo.
(remote_unpack_thread_info_response): Likewise.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
* cli/cli-setshow.c (do_setshow_command): Partially revert previous
change. Cast to "char **" for var_string.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
* cp-name-parser.y (parse_escape): Revert previous change. Return
the input character by default.
2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2-frame.c (dwarf2_frame_prev_register): Use gdb_byte.
* i386-linux-nat.c (fetch_register, store_register, supply_gregset)
(fill_gregset): Likewise.
* i386-tdep.c (i386_frame_prev_register)
(i386_sigtramp_frame_prev_register): Likewise.
* linux-nat.c (linux_nat_xfer_memory, linux_nat_make_corefile_notes):
Likewise.
* linux-thread-db.c (thread_db_xfer_memory): Likewise.
* remote.c (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint):
Likewise.
* target.c (debug_to_insert_hw_breakpoint)
(debug_to_remove_hw_breakpoint, update_current_target): Likewise.
2005-05-28 Hans-Peter Nilsson <hp@axis.com>
* MAINTAINERS: Change cris-elf state to non-broken.
* cp-name-parser.y (parse_escape): Initialize target_char to zero.
2005-05-27 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (crisv32_scan_prologue): Add.
(cris_frame_unwind_cache, cris_skip_prologue): Call
crisv32_scan_prologue when debugging CRISv32.
2005-05-27 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (cris_sigtramp_start, cris_rt_sigtramp_start)
(cris_frame_prev_register, cris_sigtramp_frame_prev_register)
(cris_return_value): Use gdb_byte for byte buffers.
(struct cris_frame_unwind, struct cris_frame_base): Fix formatting.
2005-05-26 Chris Demetriou <cgd@netbsd.org>
* MAINTAINERS (Write After Approval): Remove myself.
2005-05-27 Andrew Cagney <cagney@gnu.org>
* jv-lang.c (get_java_utf8_name): Add cast.
(evaluate_subexp_java): Use gdb_byte for buffers.
* jv-valprint.c (java_value_print, java_value_print): Use gdb_byte
for buffers.
* scm-lang.c (scm_get_field, scm_unpack)
(scm_evaluate_string): Use gdb_byte for buffers.
(scm_lookup_name): Add cast.
* scm-valprint.c (scm_scmval_print, scm_scmval_print): Use
gdb_byte for buffers.
* tui/tui.h (tui_get_command_dimension): Make parameters unsigned.
* tui/tui.c (tui_get_command_dimension): Make parameters unsigned.
* value.h (check_field): Change "name" to a string.
* valops.c (check_field): Change "name" to a string.
* scm-lang.h (scm_parse): Use gdb_byte for buffers.
* source.c (get_current_source_symtab_and_line)
(set_current_source_symtab_and_line): Initialize all fields of sal
structures.
* cli/cli-cmds.c (list_command): Use gdb_byte for buffers.
2005-05-26 Andrew Cagney <cagney@gnu.org>
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
2005-05-24 Andrew Cagney <cagney@gnu.org>
* rs6000-tdep.c (ppc_supply_reg, ppc_collect_reg): Use gdb_byte
for byte buffers.
(rs6000_fetch_pointer_argument): Use get_frame_register_unsigned.
(rs6000_software_single_step, sstep_breaks, skip_prologue)
(rs6000_push_dummy_call, rs6000_push_dummy_call)
(rs6000_push_dummy_call, rs6000_push_dummy_call)
(rs6000_register_to_value, e500_pseudo_register_read)
(rs6000_store_return_value, e500_pseudo_register_write)
(rs6000_frame_prev_register, rs6000_extract_return_value): Ditto.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value)
(do_ppc_sysv_return_value, ppc_sysv_abi_return_value)
(ppc_sysv_abi_broken_return_value)
(ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value)
(ppc64_sysv_abi_return_value, ppc64_sysv_abi_return_value): Ditto.
* ppc-linux-tdep.c (ppc_linux_in_sigtramp)
(ppc_linux_at_sigtramp_return_path)
(ppc_linux_skip_trampoline_code)
(ppc_linux_memory_remove_breakpoint, ppc_linux_return_value):
* rs6000-tdep.c (rs6000_value_to_register)
(rs6000_register_to_value): Ditto.
* ppc-tdep.h (ppc_sysv_abi_return_value)
(ppc64_sysv_abi_return_value, ppc_sysv_abi_broken_return_value)
(ppc_linux_memory_remove_breakpoint): Ditto.
2005-05-24 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (s390_frame_prev_register): Change type of last
argument to 'gdb_byte *'.
(s390_stub_frame_prev_register): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
2005-05-24 Kris Warkentin <kewarken@qnx.com>
* config/i386/nto.mt: Remove remote-nto.o.
2005-05-24 Orjan Friberg <orjanf@axis.com>
* config/djgpp/fnchange.lst: Add mappings for
gdbserver/linux-cris-low.c and gdbserver/linux-crisv32-low.c.
2005-05-23 Michael Snyder <msnyder@redhat.com>
From Nora Pan <qpan@mvista.com>
* linux-nat.c (read_mapping): Don't stumble over entries in
mapping that have name but zero inode.
2005-05-23 Andrew Cagney <cagney@gnu.org>
* target.h (child_xfer_memory): Use gdb_byte for byte buffer
parameters.
* inftarg.c (child_xfer_partial): Update.
* wince.c (child_xfer_memory): Update.
* win32-nat.c (child_xfer_memory): Update.
* rs6000-nat.c (child_xfer_memory): Update.
* infptrace.c (child_xfer_memory): Update.
* dcache.c (struct dcache_block): Use gdb_byte for the byte
buffers.
(dcache_read_line, dcache_xfer_memory, dcache_poke_byte)
(dcache_peek_byte, dcache_write_line): Ditto.
* auxv.h (target_auxv_read, procfs_xfer_auxv)
(target_auxv_parse): Use gdb_byte for byte buffer parameters.
* auxv.c (target_auxv_read, procfs_xfer_auxv, target_auxv_parse)
(target_auxv_search, fprint_target_auxv): Update.
2005-05-23 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c: Tweak values for cris-mode.
2004-05-23 Joel Brobecker <brobecker@adacore.com>
* mdebugread.c (record_minimal_symbol): New procedure.
(parse_partial_symbols): Use record_minimal_symbol to record
the new minimal symbols instead of prim_record_minimal_symbol
and prim_record_minimal_symbol_and_info.
2005-05-22 Mark Kettenis <kettenis@gnu.org>
* NEWS: Mention OpenBSD/arm as a new native configuration.
* armnbsd-nat.c: Include "gdb_string.h" and "inf_ptrace.h".
Reorder includes. Don't require FETCH_INFERIOR_REGISTERS to be
defined.
(armnbsd_fetch_registers): Rename from armnbsd_fetch_registers.
Make static.
(armnbsd_store_registers): Rename from armnbsd_store_registers.
Make static.
(_initialize_arm_netbsd_nat): Construct and add target vector.
* Makefile.in (armnbsd-nat.o): Update dependencies.
* config/arm/nbsdaout.mh (NATDEPFILES): Remove infptrace.o and
intarg.o, add inf-ptrace.o.
(NAT_FILE): Set to solib.h.
* config/arm/nbsdelf.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o, add inf-ptrace.o.
(NAT_FILE): Remove.
* arm-tdep.c (arm_extract_return_value, arm_store_return_value):
Change type of last argument to `gdb_byte *'.
* configure.host: Add arm*-*-openbsd*.
* configure.tgt: Add arm*-*-openbsd*.
2005-05-22 Andrew Cagney <cagney@gnu.org>
* frame.h (frame_register_unwind, frame_unwind_register)
(get_frame_register, frame_register, put_frame_register)
(get_frame_memory, safe_frame_unwind_memory)
(frame_register_read): Use gdb_byte for byte buffer parameters.
* trad-frame.h (trad_frame_get_register)
(frame_get_prev_register): Ditto.
* frame-unwind.h (frame_prev_register_ftype): Ditto.
* frame.c (frame_pop, frame_register, frame_unwind_register)
(get_frame_register, frame_unwind_register_signed)
(frame_unwind_register_unsigned, frame_unwind_unsigned_register)
(frame_register_read, get_frame_memory): Update.
* trad-frame.c (trad_frame_get_prev_register): Update.
(trad_frame_get_register): Update.
* gdbcore.h (deprecated_read_memory_nobpt, read_memory): Ditto.
* breakpoint.c (deprecated_read_memory_nobpt): Update.
* corefile.c (read_memory): Update.
* tramp-frame.c (tramp_frame_prev_register): Update.
* valops.c (value_assign): Update.
* sentinel-frame.c (sentinel_frame_prev_register): Update.
* std-regs.c (value_of_builtin_frame_fp_reg)
(value_of_builtin_frame_pc_reg): Update.
* infcmd.c (default_print_registers_info): Update
* dummy-frame.c (dummy_frame_prev_register): Update.
* findvar.c (value_of_register, value_from_register): Update.
* tui/tui-regs.c (tui_register_format, tui_get_register): Update.
* mi/mi-main.c (register_changed_p, get_register): Update.
2005-05-20 Eli Zaretskii <eliz@gnu.org>
* configure.ac: Add snprintf and vsnprintf to AC_CHECK_DECLS. Fix
bad description of _MSE_INT_H that caused each word in config.in
to be enclosed in [].
* configure, config.in: Regenerate.
2005-05-20 Joel Brobecker <brobecker@adacore.com>
* alpha-tdep.c (fp_register_zero_p): New function.
(fp_register_sign_bit): New function.
(alpha_next_pc): Add support for floating-point control instructions.
2005-05-19 Andrew Cagney <cagney@gnu.org>
* defs.h (extract_signed_integer, extract_unsigned_integer)
(extract_long_unsigned_integer, extract_typed_address)
(store_signed_integer, store_unsigned_integer)
(store_typed_address): Use gdb_byte for byte buffer parameters.
(push_bytes, push_word): Delete declaration.
* valops.c (push_bytes, push_word): Delete function.
* findvar.c (extract_signed_integer, extract_unsigned_integer)
(extract_typed_address, store_signed_integer)
(store_unsigned_integer): Update.
* regcache.h (regcache_raw_read, regcache_raw_write)
(regcache_raw_read_part, regcache_raw_write_part)
(regcache_cooked_read_part, regcache_cooked_write_part)
(regcache_cooked_read, regcache_cooked_write)
(regcache_raw_supply, regcache_raw_collect)
(regcache_cooked_read_ftype, regcache_save, regcache_restore)
(deprecated_read_register_gen, deprecated_write_register_gen)
(deprecated_read_register_bytes, deprecated_write_register_bytes)
(deprecated_grub_regcache_for_registers): Use gdb_byte for byte
buffer parameters.
* ia64-tdep.c (ia64_extract_return_value): Update.
* frame.c (do_frame_register_read): Update.
* regcache.c (deprecated_grub_regcache_for_registers)
(struct regcache, regcache_save, regcache_restore, regcache_cpy)
(do_cooked_read, regcache_xmalloc, register_buffer)
(deprecated_read_register_bytes, regcache_raw_read)
(regcache_raw_read_signed, regcache_raw_read_unsigned)
(deprecated_read_register_gen, regcache_cooked_read)
(regcache_cooked_read_signed, regcache_cooked_read_unsigned)
(deprecated_write_register_gen, regcache_cooked_write)
(deprecated_write_register_bytes, regcache_raw_read_part)
(regcache_raw_write_part, regcache_cooked_read_part)
(regcache_cooked_write_part, read_register, regcache_raw_supply):
2005-05-17 Corinna Vinschen <vinschen@redhat.com>
* MAINTAINERS: Undelete v850.
* Makefile.in: Re-add v850-tdep.o dependencies.
* configure.tgt: Re-add v850.
* v850-tdep.c: Reorder code slightly. Add register number enumerator.
(struct v850_frame_cache): New structure.
(v850_processor_type_table): Remove. Move functionality into
v850_register_name, v850e_register_name and v850_gdbarch_init.
(v850_register_name): New function.
(v850e_register_name): New function.
(struct prologue_info): Remove definition.
(v850_register_type): New function.
(v850_type_is_scalar): New function.
(v850_use_struct_convention): Align to gcc behaviour.
(v850_handle_prepare): Renamed from handle_prepare. Change third
parameter to struct v850_frame_cache *.
(v850_handle_pushm): Renamed from handle_pushm. Change third parameter
to struct v850_frame_cache *.
(v850_is_save_register): New function to evaluate if a register is
caller-save.
(v850_analyze_prologue): Replace v850_scan_prologue. Change to support
new frame code.
(v850_init_extra_frame_info): Remove.
(v850_frame_chain): Remove.
(v850_find_callers_reg): Remove.
(v850_skip_prologue): Make static.
(v850_pop_frame): Remove.
(v850_frame_align): New function.
(v850_push_dummy_call): Replace v850_push_arguments.
(v850_push_return_address): Remove.
(v850_extract_return_value): New function.
(v850_store_return_value): New function.
(v850_return_value): New function.
(v850_frame_saved_pc): Remove.
(v850_breakpoint_from_pc): New function.
(v850_alloc_frame_cache): New function.
(v850_fix_call_dummy): Remove.
(v850_frame_cache): New function.
(v850_target_architecture_hook): Remove.
(v850_frame_prev_register): New function.
(v850_frame_this_id): New function.
(v850_frame_unwind): New structure.
(v850_frame_sniffer): New function.
(v850_unwind_sp): New function.
(v850_unwind_pc): New function.
(v850_unwind_dummy_id): New function.
(v850_frame_base_address): New function.
(v850_frame_base): New structure.
(v850_gdbarch_init): New function.
* config/v850/v850.mt: Undelete. Drop TM_FILE.
2005-05-17 Daniel Jacobowitz <dan@codesourcery.com>
Dennis Brueni <dennis@slickedit.com>
* stack.c (print_frame): In MI mode, output a fullname attribute
with the stack frame.
2005-05-16 Mark Kettenis <kettenis@gnu.org>
* corelow.c (core_xfer_partial): Change type of readbuf and
writebuf to `gdb_byte *'.
* sparc-nat.c (sparc_xfer_wcookie, sparc_xfer_partial): Change
type of readbuf and writebuf to `gdb_byte *'.
* bsd-uthread.c (bsd_uthread_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* inf-ptrace.c (inf_ptrace_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* bsd-kvm.c (bsd_kvm_xfer_memory): Replace.
(bsd_kvm_xfer_partial): New function.
(bsd_kvm_add_target): Set to_xfer_partial instead of
to_xfer_memory.
* bfd-target.c (target_bfd_xfer_partial): Change type of readbuf
and writebuf to `gdb_byte *'.
* target.c (deprecated_debug_xfer_memory): Remove prototype.
(deprecated_debug_xfer_memory): Change type of second argument to
`gdb_byte *'.
* remote.c (remote_xfer_memory): Remove prototype.
(remote_xfer_memory): Change type of second argument to `gdb_byte
*'.
(remote_xfer_partial): Change type of readbuf and writebuf to
`gdb_byte *'.
* config/sparc/fbsd.mt (TDEPFILES): Add solib.o and solib-svr4.o.
* config/sparc/fbsd.mh (NATDEPFILES): Remove solib.o, solib-svr4.o
and solib-legacy.o.
(NAT_FILE): Remove.
2005-05-16 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (s390_return_value): Remove unnecessary casts.
(s390_breakpoint_from_pc): Change type of return value and
'breakpoint' to const gdb_byte *.
2005-05-16 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write):
Change type of 'buf' argument to gdb_byte *.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_register_to_value): Change type of 'out' to gdb_byte *, change
type of 'in' to gdb_byte [].
(s390_value_to_register): Change type of 'in' to gdb_byte *, change
type of 'out' to gdb_byte [].
(s390_return_value): Change type of 'out' and 'in' to gdb_byte *.
2005-05-16 Andrew Cagney <cagney@gnu.org>
* target.h (target_read_partial, target_write_partial)
(do_xfer_memory, xfer_memory, target_read, target_write)
(get_target_memory): For buffers, change "void*" to gdb_byte.
(struct target_ops): Ditto for to_xfer_partial and
deprecated_xfer_memory.
* dcache.h (dcache_xfer_memory): Ditto.
* target.c (default_xfer_partial, target_read_partial)
(target_write_partial, target_read, target_write)
(do_xfer_memory, update_current_target, get_target_memory): Update.
(target_read_string): Change buf to a gdb_byte.
* dcache.c (dcache_xfer_memory): Update.
* exec.c (xfer_memory): Make buffer type to gdb_byte.
* mem-break.c (default_memory_insert_breakpoint): Remove cast.
* disasm.c (dis_asm_read_memory): Remove cast, use gdb_byte.
2005-05-16 Mark Kettenis <kettenis@gnu.org>
* sol-thread.c (ignore): Change last argument to `gdb_byte.'
* config/i386/fbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/fbsd64.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/nbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/nbsd64.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/nbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/nbsd64.mt (DEPRECATED_TM_FILE): Remove.
* observer.sh: Quote $DJGPP.
2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (.y.c): Update ylwrap invocation.
2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (child_follow_fork, linux_handle_extended_wait)
(lin_lwp_attach_lwp, linux_nat_attach, wait_lwp, child_wait)
(linux_nat_wait, kill_wait_callback): Use my_waitpid.
(_initialize_linux_nat, lin_thread_get_thread_signals): Use
SA_RESTART.
2005-05-14 Mark Kettenis <kettenis@gnu.org>
* configure.tgt (vax-*-openbsd*): Set gdb_target to obsd.
* config/vax/obsd.mt (TDEPFILES): New file.
* i386-tdep.c (i386_supply_gregset, i386_collect_gregset): Use
gdb_byte instead of bfd_byte.
* mips-tdep.c (mips_pseudo_register_read)
(mips_pseudo_register_write): Change type of last argument to
`gdb_byte *'.
(mips_register_to_value, mips_value_to_register): Change type of
last argument to `gdb_byte *'. Remove casts that are no longer
needed.
(mips_fetch_instruction, fetch_mips_16): Use gdb_byte for buf.
(mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call)
(mips_o32_push_dummy_call, mips_o32_return_value): Use `const
gdb_byte *' for val and gdb_byte for valbuf. Remove casts that
are no longer needed.
(mips_eabi_return_value, mips_n32n64_return_value)
(mips_o32_return_value, mips_o64_return_value): Change type of
readbuf and writebuf arguments to `gdb_byte *'.
(mips_read_fp_register_single): Change type of last argument to
`gdb_byte *'. Use `gdb_byte *' for raw_buffer.
(mips_read_fp_register_double): Change type of last argument to
`gdb_byte *'.
(mips_print_fp_register): Use `gdb_byte *' for raw_buffer. Remove
casts that are no longer needed.
(mips_print_register, print_gp_register_row): Use gdb_byte for
raw_buffer. Remove casts that are no longer needed.
(mips_single_step_through_delay): Use gdb_byte for buf.
(mips_breakpoint_from_pc): Change return type to `const gdb_byte
*'. Use gdb_byte for mips16_big_breakpoint, big_breakpoint,
pmon_big_breakpoint, idt_big_breakpoint, mips16_little_breakpoint,
little_breakpoint, pmon_little_breakpoint and
idt_little_breakpoint.
(mips_integer_to_address): Use `gdb_byte *' for tmp.
* config/m68k/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/obsd64.mt (DEPRECATED_TM_FILE): Remove.
* config/pa/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/obsd64.mt (DEPRECATED_TM_FILE): Remove.
* sparc-tdep.c (sparc_fetch_instruction, sparc_fetch_wcookie): Use
gdb_byte for buf.
(sparc32_pseudo_register_read, sparc32_pseudo_register_write):
Change type of last argument to `gdb_byte *'. Remove casts that
are no longer needed.
(sparc32_push_dummy_code, sparc32_store_arguments): Use gdb_byte
for buf.
(sparc_breakpoint_from_pc): Change return type to `const gdb_byte
*'. Use gdb_byte for break_insn.
(sparc32_extract_return_value, sparc32_store_return_value): Change
type of last argument to `gdb_byte *'. Use gdb_byte for buf.
(sparc32_return_value): Change type of readbuf and writebuf
arguments to `gdb_byte *'.
(sparc_software_single_step): Use gdb_byte for npc_save and
nnpc_save.
(sparc_supply_rwindow, sparc_collect_rwindow): Use gdb_byte for
buf.
(sparc32_supply_gregset, sparc32_collect_gregset)
(sparc32_supply_fpregset, sparc32_collect_fpregset): Use `gdb_byte
*' for regs.
* sparc64-tdep.c (sparc64_pseudo_register_read)
(sparc64_pseudo_register_write): Change type of last argument to
`gdb_byte *'. Remove casts that are no longer needed.
(sparc64_store_floating_fields, sparc64_extract_floating_fields):
Change type of valbuf argument to `gfd_byte *'.
(sparc64_store_arguments): Use `gdb_byte *' for valbuf. use
gdb_byte for buf.
(sparc64_extract_return_value, sparc64_store_return_value): Change
type of last argument to `gdb_byte *'. Use gdb_byte for buf.
(sparc64_return_value): Change type of readbuf and writebuf
arguments to `gdb_byte *'.
(sparc64_supply_gregset, sparc64_collect_gregset)
(sparc64_supply_fpregset, sparc64_collect_fpregset): Use `gdb_byte
*' for regs.
* m68k-tdep.c (m68k_local_breakpoint_from_pc): Change return type
to `const gdb_byte *'. Use gdb_byte for break_insn.
(m68k_register_to_value): Change type of last argument to
`gdb_byte *'. Use gdb_byte for from.
(m68k_value_to_register): Change type of last argument to
`gdb_byte *'. Use gdb_byte for to.
(m68k_extract_return_value): Change type of last argument to
`gdb_byte *'. Use gdb_byte for buf. Remove unnecessary cast.
(m68k_svr4_extract_return_value): Change type of last argument to
`gdb_byte *'. Use gdb_byte for buf.
(m68k_store_return_value): Change type of last argument to
`gdb_byte *'. Remove unnecessary cast.
(m68k_svr4_store_return_value): Change type of last argument to
`gdb_byte *'. Use gdb_byte for buf.
(m68k_return_value, m68k_svr4_return_value): Change type of
readbuf and writebuf arguments to `gdb_byte *'.
(m68k_push_dummy_call, m68k_unwind_pc, m68k_frame_cache)
(m68k_unwind_dummy_id): Use gdb_byte for buf.
(m68k_get_longjmp_target): Use `gdb_byte *' for buf.
* m68kbsd-tdep.c (m68kbsd_supply_fpregset)
(m68kbsd_supply_gregset): Use `gdb_byte *' for regs.
* m88k-tdep.c (m88k_breakpoint_from_pc): Change return type to
`const gdb_byte *'. Use gdb_byte for break_insn.
(m88k_return_value): Change type of readbuf and
writebuf arguments to `gdb_byte *'. Use gdb_byte for buf.
(m88k_supply_gregset): Use `gdb_byte *' for regs.
* vax-tdep.c (vax_return_value): Change type of readbuf and
writebuf arguments to `gdb_byte *'.
* amd64-tdep.c (amd64_return_value): Change type of readbuf and
writebuf arguments to `gdb_byte *'. Remove now redundant casts.
* i386-tdep.c (i386_return_value): Change type of readbuf and
writebuf arguments to `gdb_byte *'.
(i386_pseudo_register_read, i386_pseudo_register_write): Change
type of last argument to `gdb_byte *'.
(i386_register_to_value, i386_value_to_register): Change type of
last argument to `gdb_byte *'. Simplify function a bit.
* i387-tdep.h (i387_value_to_register, i387_register_to_value):
Change type of last argument to `gdb_byte *'.
* i387-tdep.c: Likewise.
2005-05-13 Andrew Cagney <cagney@gnu.org>
* gdbarch.sh (pseudo_register_read, pseudo_register_write)
(value_to_register, register_to_value, pointer_to_address)
(address_to_pointer, return_value, extract_return_value)
(store_return_value): Instead of a void pointer, use gdb_byte.
* gdbarch.h, gdbarch.c: Regenerate.
* inferior.h (unsigned_address_to_pointer)
(signed_pointer_to_address, address_to_signed_pointer)
(unsigned_pointer_to_address): Update.
* arch-utils.h (legacy_return_value):
* arch-utils.c (legacy_extract_return_value)
(legacy_return_value): Update.
* findvar.c (unsigned_pointer_to_address)
(signed_pointer_to_address, unsigned_address_to_pointer)
(address_to_signed_pointer): Update.
2005-05-13 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (_initialize_cris_tdep): Improve help strings for
cris-version, cris-mode, and cris-dwarf2-cfi settings.
2005-05-13 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (usr_cmd_cris_version): Change type to int.
(cris_mode_normal, cris_mode_guru, cris_modes, usr_cmd_cris_mode): Add.
(struct gdbarch_tdep): Change type of cris_version to int. Add
cris_mode.
(cris_mode, set_cris_mode): New functions.
(crisv32_single_step_through_delay): Read from NRP register instead
of ERP register in guru mode.
(cris_breakpoint_from_pc): Rename break_insn to break8_insn.
Add break15_insn, returned in guru mode.
(_initialize_cris_tdep): Add call to add_setshow_enum_cmd for new
cris-mode setting.
(cris_dump_tdep): Add dump of cris_mode.
(cris_gdbarch_init): Add cris_mode to search criteria for architecture.
Register the sigtramp frame sniffer only if not in guru mode.
2005-05-13 Eli Zaretskii <eliz@gnu.org>
* Makefile.in (go32-nat.o): Add $(top_h) to prerequisites.
* go32-nat.c: Include top.h. Update copyright years.
(init_go32_ops): Override the default value of gdbinit[] with
"gdb.ini".
* cli/cli-cmds.c: Don't define GDBINIT_FILENAME.
(init_cli_cmds): Use gdbinit[] instead of a compile-time literal
string GDBINIT_FILENAME.
* top.c (PATH_MAX): Define if not defined.
(gdbinit): Declare with a constant size PATH_MAX.
* config/i386/go32.mh (XM_FILE): Remove.
* config/i386/xm-go32.h: Remove file.
2005-05-12 Mark Kettenis <kettenis@gnu.org>
* sol-thread.c: Include "solib.h".
(sol_thread_attach): Use solib_add instead of SOLIB_ADD.
* Makefile.in (sol-thread.o): Update dependencies.
* NEWS: Mention OpenBSD/mips64 as a new native configuration.
2005-05-12 Eli Zaretskii <eliz@gnu.org>
* observer.sh (texi) [DJGPP]: If the file name includes a colon,
convert it to the /dev/x/ form.
2005-05-12 Mark Kettenis <kettenis@gnu.org>
* solib.h (CLEAR_SOLIB, SOLIB_ADD)
(SOLIB_CREATE_INFERIOR_HOOK, SOLIB_REMOVE_INFERIOR_HOOK)
(SOLIB_IN_DYNAMIC_LINKER, SOLIB_RESTART)
(DISABLE_UNSETTABLE_BREAK, PC_SOLIB)
(IN_SOLIB_DYNSYM_RESOLVE_CODE): Remove defines and orphaned
comments.
* breakpoint.c: Include "solib.h".
(insert_bp_location) [!DISABLE_UNSETTABLE_BREAK]: Call
solib_address.
(remove_solib_event_breakpoints, create_solib_event_breakpoint)
(disable_breakpoints_in_shlibs)
(disable_breakpoints_in_unloaded_shlib)
(re_enable_breakpoints_in_shlibs): Compile if SOLIB_ADD isn't
defined. If PC_SOLIB isn't defined, call solib_address.
(_initialize_breakpoint): Unconditionally install observer.
* corelow.c: Include "solib.h".
[SOLIB_ADD] (solib_add_stub): Remove prototype.
(core_close) [!CLEAR_SOLIB]: Call clear_solib.
(solib_add_stub) [!SOLIB_ADD] Call solib_add.
(core_open): Unconditionally call solib_add_stub.
* fork-child.c: Include "solib.h".
(fork_inferior) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
* infcmd.c: Include "solib.h".
(attach_command) [!SOLIB_ADD]: Call shlib_rescan. Unconditionally
call re_enable_breakpoints_in_shlibs.
* infrun.c: Include "solib.h".
(SOLIB_IN_SYNSYM_RESOLVE_CODE): Don't define if not already
defined.
(stop_on_solib_events, show_stop_on_solib_events): Include
unconditionally.
(follow_exec) [!SOLIB_CREATE_INFERIOR_HOOK]: Call
solib_create_inferior_hook.
(handle_inferior_event) [!SOLIB_ADD]: Call shlib_add.
[!IN_SOLIB_DYNSYM_RESOLVE_CODE]: Call in_solib_dynsym_resolve_code.
(_initialize_infrun): Unconditionally add "stop_on_solib-events"
command.
* remote.c: Include "solib.h".
(remote_open_1): Unconditionally call no_shared_libraries.
[!SOLIB_CREATE_INFERIOR_HOOK] Call solib_create_inferior_hook.
* stack.c: Include "solib.h".
(print_frame) [!PC_SOLIB] Call shlib_for_pc.
* xcoffsolib.c (no_shared_libraries): Remove function.
* Makefile.in (SFILES): Add solib.c.
(ALLDEPFILES): Remove solib.c.
(COMMON_OBS): Add solib.o.
(breakpoint.o, corelow.o, fork-chiled.o, infcmd.o, infrun.o)
(remote.o, stack.o): Update dependencies.
2005-05-12 Daniel Jacobowitz <dan@codesourcery.com>
* cp-names.y: Renamed to ...
* cp-name-parser.y: ... this.
* Makefile.in (SFILES, YYFILES, YYOBJ): Rename cp-names.y to
cp-name-parser.y.
(test-cp-names.o): Renamed to test-cp-name-parser.o.
(test-cp-names): Renamed to test-cp-name-parser.
(clean, local-maintainer-clean): Update.
(cp-names.o): Renamed to cp-name-parser.o.
2005-05-12 Eli Zaretskii <eliz@gnu.org>
* observer.sh: Use observer.tmp instead of observer.inc-tmp which
on 8+3 filesystems overwrites observer.inc. Update copyright year
of the resultant file.
* gnu-v3-abi.c (init_gnuv3_ops): Cast is_gnu_v3_mangled_dtor and
is_gnu_v3_mangled_ctor to avoid compiler warnings.
* config/djgpp/config.sed: Adapt to latest Autoconf.
* config/djgpp/djconfig.sh: Add -Wpointer-arith and
-Wuninitialized to the build warnings.
2005-05-11 Eli Zaretskii <eliz@gnu.org>
* config/djgpp/fnchange.lst: Add mappings for inttypes*.m4,
ChangeLog-2004, reg-cris*.dat, dw2-intermix.*, semcris*-switch.c.
Fix mappings for hilo-hazard-?.s.
* config/djgpp/README: Update GDB versions and my email address.
2005-05-09 Andrew Cagney <cagney@gnu.org>
Use gdb_byte in preference to bfd_byte.
* gdbarch.sh: Update.
* gdbarch.h, gdbarch.c: Re-generate.
* ada-lang.c, ada-lang.h, ada-valprint.c, arch-utils.c: Update.
* c-lang.c, c-lang.h, c-valprint.c, cp-valprint.c: Update.
* f-lang.c, f-lang.h, f-valprint.c, gdbcore.h, jv-lang.h: Update.
* jv-valprint.c, language.c, language.h, m2-lang.c: Update.
* m2-lang.h, m2-valprint.c, objc-lang.c, p-lang.c: Update.
* p-lang.h, p-valprint.c, regcache.c, scm-lang.c: Update.
* scm-lang.h, scm-valprint.c, target.c, target.h: Update.
* tramp-frame.c, valarith.c, valops.c, valprint.c: Update.
* valprint.h, value.c, value.h: Update.
2005-05-09 Mark Kettenis <kettenis@gnu.org>
* vaxbsd-nat.c (vaxbsd_supply_gregset, vaxbsd_collect_gregset):
Use `gdb_byte *' for regs.
* vax-tdep.c (vax_supply_gregset): Use `gdb_byte *' for regs;
(vax_store_arguments, vax_push_dummy_call, vax_return_value): Use
gdb_byte for buf.
(vax_breakpoint_from_pc): Change return type to `const gdb_byte
*'. Use gdb_byte for break_insn.
(vax_skip_prologue): Use gdb_byte for op.
* i387-tdep.c: Remove outdated comments.
* defs.h: Unconditionally include <sys/types.h>.
2005-05-08 Daniel Jacobowitz <dan@codesourcery.com>
* mips-tdep.c (mips_stub_frame_sniffer): Handle .MIPS.stubs
section like .plt.
2005-05-08 Mark Kettenis <kettenis@gnu.org>
* i386-linux-tdep.c (linux_sigtramp_code, linux_rt_sigtramp_code):
Change type to `static const gdb_byte'.
(i386_linux_sigtramp_start, i386_linux_rt_sigtramp_start)
(i386_linux_sigcontext_addr): Use gdb_byte for buf.
* amd64-linux-tdep.c (linux_sigtramp_code): Change type to `static
const gdb_byte'.
(amd64_linux_sigtramp_start, amd64_linux_sigcontext_addr): Use
gdb_byte for buf.
* amd64fbsd-tdep.c (amd64fbsd_supply_uthread)
(amd64fbsd_collect_uthread): Use gdb_byte for buf.
* config/ia64/nm-aix.h: Remove file.
* amd64-tdep.c (amd64_return_value): Use `gdb_byte *' in casts.
(amd64_push_arguments): Use gdb_byte instead of bfd_byte. Use
gdb_byte for buf.
(amd64_push_dummy_call): Use gdb_byte for buf.
(amd64_analyze_prologue): Use gdb_byte for proto, buf and op.
(amd64_frame_cache, amd64_sigtramp_frame_cache)
(amd64_unwind_dummy_id): Use gdb_byte for buf.
(amd64_supply_fxsave, amd64_collect_fxsave): Use `gdb_byte *' for
regs.
* amd64obsd-tdep.c (amd64obsd_supply_regset): Use `gdb_byte *' in
casts.
(amd64obsd_sigtramp_p): Use gdb_byte for sigreturn and `gdb_byte
*' for buf,
* i386-tdep.c (i386_breakpoint_from_pc): Change return type to
`const gdb_byte *'. Use gdb_byte for break_insn.
(i386_follow_jump): Use gdb_byte for op.
(i386_analyze_struct_return): Use gdb_byte for proto1, proto2, buf
and op.
(i386_skip_probe): Use gdb_byte for buf and op.
(struct i386_insn): Use gdb_byte for insn and mask.
(i386_match_insn, i386_analyze_frame_setup)
(i386_analyze_register_saves): Use gdb_byte for op.
(i386_skip_prologue): Use gdb_byte for pic_pat and op;
(i386_unwind_pc, i386_frame_cache, i386_sigtramp_frame_cache)
(i386_unwind_dummy_id, i386_get_longjmp_target): Use gdb_byte for
buf.
(i386_extract_return_value, i386_store_return_value): Use
`gdb_byte *' instead of `void *' for valbuf argument. Remove now
redundant cast.
(i386_pseudo_register_read, i386_pseudo_register_write): Use
gdb_byte for mmx_buf.
(i386_register_to_value, i386_value_to_register): Use `gdb_byte *'
instead of `char *' for buf.
(i386_supply_gregset, i386_collect_gregset): Use `gdb_byte *'
instead of `char *' for regs.
(i386_svr4_sigcontext_addr): Use gdb_byte for buf.
* i386obsd-tdep.c (i386obsd_sigtramp_p): Use gdb_byte for
sigreturn and `gdb_byte *' for buf.
(i386obsd_aout_supply_regset): Use `const gdb_byte *' in cast.
(i386obsd_supply_uthread, i386obsd_collect_uthread): Use gdb_byte
for buf.
* i386bsd-tdep.c (i386bsd_sigcontext_addr): Use gdb_byte for buf.
* defs.h (gdb_byte): New typedef. Tweak comments.
* target.h (target_link): Remove prototype.
* target.c (target_link): Remove function.
* symfile.c: Remove comment about rombug.
2005-05-04 Mark Kettenis <kettenis@gnu.org>
* config/i386/cygwin.mh (XM_FILE): Remove variable.
* config/i386/xm-cygwin.h: Remove file.
2005-05-03 Ben Elliston <bje@au.ibm.com>
* infrun.c (handle_inferior_event): Update the comment about users
of stepped_after_stopped_by_watchpoint.
2005-05-02 Corinna Vinschen <vinschen@redhat.com>
* MAINTAINERS: Remove hint that sh64 doesn't build.
* sh64-tdep.c (sh64_push_dummy_call): Cast buf in call to write_memory.
(sh64_do_fp_register): make raw_buffer unsigned.
(sh64_do_register): Ditto.
2005-05-02 Mark Kettenis <kettenis@gnu.org>
* bsd-uthread.c: Include "solib.h".
* Makefile.in (bsd-uthread.o): Update dependencies.
2005-05-01 Daniel Jacobowitz <dan@codesourcery.com>
* gdbarch.sh (deprecated_current_gdbarch_select_hack): Flush
cached frames when changing gdbarch.
* gdbarch.c: Regenerated.
2005-05-01 Andrew Cagney <cagney@gnu.org>
* MAINTAINERS: Note that cris, m68k, mn10300, sh64, sparc and vax
do not build.
* gdbarch.sh (deprecated_extract_return_value)
(breakpoint_from_pc, deprecated_store_return_value)
(memory_insert_breakpoint, memory_remove_breakpoint): Change type
of buffer to a bfd_byte pointer.
* gdbarch.h, gdbarch.c: Re-generate.
* mem-break.c (memory_insert_breakpoint)
(memory_remove_breakpoint, default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Update.
* target.h (memory_insert_breakpoint)
(memory_remove_breakpoint, default_memory_insert_breakpoint)
(default_memory_remove_breakpoint): Update declarations.
(struct target_ops): Update to_insert_breakpoint and
to_remove_breakpoint.
* target.c (debug_to_remove_breakpoint)
(debug_to_insert_breakpoint): Update.
* remote-m32r-sdi.c (m32r_remove_breakpoint)
(m32r_insert_breakpoint): Update.
* m32r-tdep.c (m32r_memory_insert_breakpoint)
(m32r_memory_remove_breakpoint): Update.
* remote-e7000.c (e7000_insert_breakpoint)
(e7000_remove_breakpoint): Update.
* remote-rdi.c (arm_rdi_insert_breakpoint)
(arm_rdi_remove_breakpoint): Update.
* remote-sim.c (gdbsim_insert_breakpoint)
(gdbsim_remove_breakpoint): Update.
* exec.c (ignore): Update.
* rs6000-tdep.c (rs6000_extract_return_value): Update.
* ia64-tdep.c (ia64_memory_insert_breakpoint)
(ia64_memory_remove_breakpoint): Update.
* remote-rdp.c (remote_rdp_insert_breakpoint)
(remote_rdp_remove_breakpoint): Update.
2005-05-01 Mark Kettenis <kettenis@gnu.org>
* somsolib.c, somsolib.h: Remove files.
* Makefile.in (somsolib_h): Remove.
(somsolib.o): Remove dependency.
* fbsd-nat.c: Include <sys/sysctl.h>.
(fbsd_pid_to_exec_file): Use KERN_PROC_PATHNAME sysctl if
available. Plug memory leak. Fixes PR gdb/1922.
2005-04-29 Mark Kettenis <kettenis@gnu.org>
* solist.h (TARGET_SO_FREE_SO, TARGET_SO_CLEAR_SOLIB)
(TARGET_SO_SOLIB_CREATE_INFERIOR_HOOK)
(TARGET_SO_SPECIAL_SYMBOL_HANDLING, TARGET_SO_CURRENT_SOS)
(TARGET_SO_OPEN_SYMBOL_FILE_OBJECT): Remove defines.
* solib.c (solib_data): New variable.
(solib_init, solib_ops): New functions.
(solib_open, solib_map_sections, free_so, update_solib_list)
(solib_add, clear_solib, solib_create_inferior_hook)
(in_solib_dynsym_resolve_code): Call architecture-dependent code
using solib_ops.
(_initialize_solib): Register SOLIB_DATA.
2005-04-29 Kevin Buettner <kevinb@redhat.com>
* frv-tdep.c (find_func_descr): Verify that entry point can be
found in symbol table prior to looking up its function descriptor.
* solib-frv.c (find_canonical_descriptor_in_load_object): Add
test for non-NULL link map.
2005-04-29 Corinna Vinschen <vinschen@redhat.com>
* MAINTAINERS: Revert h8300 state to un-deleted.
* Makefile.in: Re-add h8300-tdep.o dependencies.
* h8300-tdep.c: Slightly rearrange type definitions and functions.
(struct frame_extra_info): Remove.
(struct h8300_frame_cache): Replace locals with differently defined
uses_fp member.
(h8300_unwind_pc): Simplify.
(h8300_unwind_sp): New function.
(h8300_unwind_dummy_id): Simplify.
(h8300_init_frame_cache): New function.
(h8300_is_argument_spill): Use reworked defines for opcode scanning.
(h8300_skip_prologue): Rewrite.
(h8300_alloc_frame_cache): Remove.
(h8300_analyze_frame_setup): Remove.
(h8300_analyze_register_saves): Remove.
(h8300_analyze_prologue): Rewrite.
(h8300_frame_cache): Use h8300_init_frame_cache instead of
h8300_alloc_frame_cache. Use BINWORD instead of constant 4 to
accomodate 16 bit mode. Fix saved_sp and register offset evaluation.
(h8300_frame_this_id): Correctly calculate this_id using saved stack
pointer instead of base.
(h8300_frame_prev_register): Drop needless braces.
(h8300_frame_base_address): New function.
(h8300_frame_base): New frame_base.
(h8300_push_dummy_call): Return correct CFA value.
(h8300h_extract_return_value): Fix 8 byte value handling.
(h8300_use_struct_convention): New function.
(h8300h_use_struct_convention): New function.
(h8300h_store_return_value): Fix 8 byte value handling.
(h8300_return_value): New function.
(h8300h_return_value): New function.
(h8300_extract_struct_value_address): Remove deprecated functionality.
(h8300_push_dummy_code): Remove.
(h8300_gdbarch_init): Replace set_gdbarch_extract_return_value and
set_gdbarch_store_return_value calls by set_gdbarch_return_value.
Remove calls to set_gdbarch_deprecated_fp_regnum,
set_gdbarch_deprecated_extract_struct_value_address,
set_gdbarch_deprecated_use_struct_convention and
set_gdbarch_push_dummy_code.
Add calls to set_gdbarch_unwind_sp and frame_base_set_default.
Slightly rearrange code.
2005-04-28 Jim Blandy <jimb@redhat.com>
* parse.c (namecopy): Change allocation conventions.
(namecopy_size): New variable.
(copy_name): Allocate namecopy using xrealloc, instead of assuming
it has adequate space allocated to it.
(parse_exp_1): Don't try to allocate space for namecopy here.
2005-04-28 Eli Zaretskii <eliz@gnu.org>
* cli/cli-cmds.c (edit_command): If symtab->fullname is not yet
set, use symtab_to_fullname, instead of trying to do its job. Use
xstrprintf instead of malloc and sprintf.
2005-04-28 Kevin Buettner <kevinb@redhat.com>
* remote.c (init_remote_state): Eliminate use of
deprecated_register_bytes().
2005-04-28 Andrew Cagney <cagney@gnu.org>
* valops.c (check_field): Make buffer a bfd_byte.
* value.c (unpack_long, unpack_double, unpack_pointer)
(unpack_field_as_long, modify_field): Ditto.
* value.h: Update declarations.
2005-04-28 Paul Brook <paul@codesourcery.com>
* exceptions.c (print_flush): Handle NULL gdb_stdout_serial.
2005-04-27 Mark Kettenis <kettenis@gnu.org>
* solib-svr4.c (_initialize_svr4_solib)
[SVR4_FETCH_LINK_MAP_OFFSETS]: Don't set non-existent variable
svr4_legacy_fetch_link_map_offsets.
* sh-tdep.c (sh_linux_svr4_fetch_link_map_offsets): Remove function.
(sh_gdbarch_init): Remove redundant prototype.
* sh-linux-tdep.c: New file.
* config/sh/tm-linux.h (sh_linux_svr4_fetch_link_map_offsets):
Remove prototype.
(SVR4_FETCH_LINK_MAP_OFFSETS): Remove define.
* config/sh/linux.mt (TDEPFILES): Add sh64-tdep.o, remove
solib-legacy.o.
* Makefile.in (sh-linux-tdep.o): New.
* solib-svr4.c: Update copyright year. Include "gdb_assert.h".
(SVR4_FETCH_LINK_MAP_OFFSETS): Don't define if not already
defined.
(legacy_fetch_link_map_offsets): Remove prototype.
(fetch_link_map_offsets_gdbarch_data): Remove.
(LM_ADDR, LM_NEXT, IGNORE_FIRST_LINK_MAP_ENTRY)
(first_link_map_member, open_symbol_file_object, svr4_current_sos)
(svr4_fetch_objfile_link_map): Call svr4_fetch_link_map_offsets
instead of SVR4_FETCH_LINK_MAP_OFFSETS.
(solib_svr4_data): New variable.
(struct solib_svr4_ops): New.
(solib_svr4_init): New fynction.
(legacy_fetch_link_map_offsets, init_fetch_link_map_offsets):
Remove functions.
(svr4_fetch_link_map_offsets, svr4_have_link_map_offsets): Rewrite
using the new `struct solib_svr4_ops'.
(_initialize_svr4_solib): Replace registration of per-architecture
data. Add temporary hack to set
svr4_legacy_fetch_link_map_offsets if SVR4_FETCH_LINK_MAP_OFFSETS
is set.
* Makefile.in (solib-svr4.o): Update dependencies.
2005-04-26 Mark Kettenis <kettenis@gnu.org>
* configure.tgt (*-*-freebsd*): Set gdb_osabi to
GDB_OSABI_FREEBSD_ELF. Partial fix for PR gdb/1922.
2005-04-26 Andrew Cagney <cagney@gnu.org>
* remote.c (remote_open_1): Move "ex"'s declaration to where it is
used.
(remote_get_thread_local_address): Use throw_error, include a
printed string.
* linux-thread-db.c (thread_db_get_thread_local_address): Ditto.
* dwarf2loc.c (dwarf_expr_tls_address): Ditto.
* cli/cli-script.c (script_from_file): Mark up throw_error message.
* linespec.c (symtab_from_filename, decode_variable): Ditto.
2005-04-26 Andrew Cagney <cagney@gnu.org>
Rename 'struct exception' to 'struct gdb_exception'.
* wrapper.c: Update.
* varobj.c: Update.
* tui/tui-interp.c: Update.
* remote.c: Update.
* mi/mi-main.c: Update.
* mi/mi-interp.c: Update.
* linux-thread-db.c: Update.
* interps.h: Update.
* interps.c: Update.
* exceptions.h: Update.
* exceptions.c: Update.
* dwarf2loc.c: Update.
* cli/cli-interp.c: Update.
* cli/cli-script.c: Update.
* breakpoint.c: Update.
2005-04-25 Mark Mitchell <mark@codesourcery.com>
* event-loop.c (gdb_select): Program defensively.
* event-loop.c (gdb_assert.h): Include.
(<windows.h>): Include under Windows.
(<io.h>): Likeiwse.
(gdb_select): New function.
(gdb_wait_for_event): Use it.
* Makefile.in (event-loop.o): Depend on $(gdb_assert_h).
2005-04-23 Mark Kettenis <kettenis@gnu.org>
* sparc64-tdep.c: Include "dwarf2-frame.h".
(sparc64_dwarf2_frame_init_reg): New function.
* Makefile.in (sparc64-tdep.o): Update dependencies.
2005-04-22 David S. Miller <davem@davemloft.net>
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Add call to
sparc64_init_abi().
2005-04-22 Mark Kettenis <kettenis@gnu.org>
* ser-base.c: Include "ser-base.h" instead of "ser-unix.h".
2005-04-22 Mark Mitchell <mark@codesourcery.com>
* ser-base.c (<sys/time.h>): Include.
2005-04-22 Mark Kettenis <kettenis@gnu.org>
* ppcobsd-tdep.c (ppcobsd_init_abi): Set return_value.
* sparc-linux-tdep.c: Reorder includes. Tweak a few comments.
(LINUX32_SIGTRAMP_INSN0, LINUX32_SIGTRAMP_INSN1)
(LINUX32_RT_SIGTRAMP_INSN0, LINUX32_RT_SIGTRAMP_INSN1): Remove
macros.
(sparc32_linux_sigframe, sparc32_linux_rt_sigframe): Hardcode
instructions.
* sparc64-linux-tdep.c: Reorder includes. Tweak a few comments.
(LINUX64_RT_SIGTRAMP_INSN0, LINUX64_RT_SIGTRAMP_INSN1): Remove
macros.
(sparc64_linux_rt_sigframe): Hardcode instructions.
* Makefile.in (sparc-linux-tdep.o, sparc64-linux-tdep.o): Update
dependencies.
* sparc-linux-tdep.c: Update copyright year.
(sparc32_linux_init_abi): Set skip_trampoline_code and
solib_svr4_fetch_link_map_offsets. Set TDEP->plt_entry_size.
Don't set software_single_step and don't call
sparc32_sol2_init_abi.
* sparc64-linux-tdep.c: Update copyright year.
(sparc64_linux_init_abi): Set skip_trampoline_code and
solib_svr4_fetch_link_map_offsets. Set TDEP->plt_entry_size.
Don't set software_single_step and don't call
sparc64_sol2_init_abi.
2005-04-22 Eli Zaretskii <eliz@gnu.org>
* remote-st.c (_initialize_remote_st2000): Remove the extraneous
"<command>" string from the call to add_com.
* remote-sim.c (_initialize_remote_sim): Ditto.
* remote-utils.c (_initialize_sr_support): Ditto.
* remote-mips.c (_initialize_remote_mips): Ditto.
2005-04-21 David S. Miller <davem@davemloft.net>
* sparc-linux-tdep.c (sparc32_linux_sigframe_init): New function.
(sparc32_linux_sigframe, sparc32_linux_rt_sigframe): New tramp_frames.
(sparc_linux_sigtramp_start, sparc32_linux_sigtramp_start,
sparc32_linux_rt_sigtramp_start, sparc32_linux_sigtramp_p,
sparc32_linux_sigtramp_frame_cache,
sparc32_linux_sigtramp_frame_this_id,
sparc32_linux_sigtramp_frame_prev_register,
sparc32_linux_sigtramp_frame_unwind,
sparc32_linux_sigtramp_frame_sniffer): Delete.
(sparc32_linux_init_abi): Register new tramp unwinders. Kill
register of old sigtramp sniffer.
* sparc64-linux-tdep.c (sparc64_linux_sigframe_init): New
function.
(sparc64_linux_rt_sigframe): New tramp frame.
(sparc64_linux_sigtramp_start, sparc64_linux_sigtramp_p,
sparc64_linux_sigtramp_frame_cache,
sparc64_linux_sigtramp_frame_this_id,
sparc64_linux_sigtramp_frame_prev_register,
sparc64_linux_sigtramp_frame_unwind,
sparc64_linux_sigtramp_frame_sniffer): Delete.
(sparc64_linux_init_abi): Register new tramp unwinders. Kill
register of old sigtramp sniffer.
Makefile.in (sparc64-linux-tdep.o): Update dependencies.
(sparc-linux-tdep.o): Likewise.
2005-04-21 Mark Kettenis <kettenis@gnu.org>
* ser-base.c: Include "gdb_string.h".
* Makefile.in (ser-base.o): Update dependencies.
2005-04-20 David S. Miller <davem@davemloft.net>
* sparc-linux-tdep.c (sparc32_linux_sigtramp_p): Fix
signal return stub symbol names, __restore and __restore_rt are
the i386 symbol names not the sparc ones.
(sparc32_linux_sigtramp_frame_cache): Document bits/sigcontext.h
as where the offsets were obtained from.
* sparc64-linux-tdep.c (LINUX64_RT_SIGTRAMP_INSN0,
LINUX64_RT_SIGTRAMP_INSN1): New defines.
(sparc64_linux_sigtramp_start, sparc64_linux_sigtramp_p,
sparc64_linux_sigtramp_frame_cache,
sparc64_linux_sigtramp_frame_this_id,
sparc64_linux_sigtramp_frame_prev_register,
sparc64_linux_sigtramp_frame_sniffer): New functions.
(sparc64_linux_sigtramp_frame_unwind): New frame unwinder.
(sparc64_linux_init_abi): Register sigtramp frame sniffer.
* Makefile.in (sparc64-linux-tdep.o): Update dependencies.
2005-04-20 Mark Mitchell <mark@codesourcery.com>
* configure.ac: On MinGW, define USE_WIN32API and link with
-lws2_32.
* ser-tcp.c (<winsock2.h>): Include, for Windows.
(ETIMEDOUT): Define, for Windows.
(ioctl): Likewise.
(closesocket): Define, for POSIX.
(net_open): Adjust for differences in socket functions between
Windows and UNIX.
(net_close): Likweise.
(net_read_prim): New function.
(net_write_prim): Likewise.
(_initialize_ser_tcp): Initialize winsock. Fill in read_prim and
write_prim.
* ser-unix.h (ser_unix_readcchar): Remove.
(ser_unix_read_prim): Declare.
(ser_unix_write_prim): Likewise.
* ser-unix.c (generic_readchar): Move to ser-base.c.
(ser_unix_wait_for): Likewise.
(do_unix_readchar): Likewise.
(ser_unix_readchar): Likewise.
(_initialize_ser_hardwire): Initialize read_prim and write_prim.
(ser_unix_read_prim): New function.
(ser_unix_write_prim): Likewise.
* ser-base.h (generic_readchar): Declare.
(ser_base_readchar): Likewise.
* ser-base.c (<winsock2.h>): Include, for windows.
(fd_event): Use the read primitive specified by the serial
interface.
(ser_base_wait_for): Moved from ser-unix.c
(do_ser_base_read_char): Likewise.
(generic_readchar): Likewise.
(ser_base_readchar): Likewise.
(ser_base_write): Use the write primitive specified by the serial
interface.
* ser-pipe.c (_initialize_ser_pipe): Use ser_base_readchar, not
ser_unix_readchar. Initialize read_prim and write_prim.
* serial.c (struct serial_ops): Add read_prim and write_prim.
* configure: Regenerate.
2005-04-19 Ben Elliston <bje@au.ibm.com>
* c-lang.c (c_create_fundamental_type): Comment fix.
2005-04-18 Michael Snyder <msnyder@redhat.com>
* mn10300-tdep.c: Assimilate code from mn10300-prologue.c.
* mn10300-prologue.c: Remove.
* mn10300-tdep.h: Add enums from mn10300-prologue.c.
Remove prototypes.
* config/mn10300/mn10300.mt: Remove mn10300-prologue module.
2005-04-18 Michael Snyder <msnyder@redhat.com>
* config/mn10300/mn10300.mt: Add mn10300-prologue module.
* ia64-tdep.c (ia64_get_dyn_info_list): Fix indent.
2005-04-18 Mark Kettenis <kettenis@gnu.org>
* config/nm-bsd.h: Remove file.
* hppabsd-nat.c: Update copyright year. Include "target.h" and
"inf-ptrace.h".
(hppabsd_fetch_registers): Renamed from fetch_inferior_registers;
made static.
(hppabsd_store_registers): Renamed from store_inferior_registers;
made static.
(_initialize_hppabsd_nat): New function and prototype.
* config/pa/obsd.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o. Add inf-ptrace.o.
(NAT_FILE): Remove.
* Makefile.in (hppabsd-nat.o): Update dependencies.
2005-04-17 Mark Kettenis <kettenis@gnu.org>
* pa64solib.c, pa64solib.h: Remove files.
* Makefile.in (pa64solib_h): Remove variable
(pa64solib.o): Remove dependency.
2005-04-16 Mark Kettenis <kettenis@gnu.org>
* ppcobsd-nat.c: Update copyright year. Include "inf-ptrace.h".
(ppcobsd_fetch_registers): Renamed from fetch_inferior_registers;
made static.
(ppcobsd_store_registers): Renamed from store_inferior_registers;
made static.
(_initialize_ppcobsd_nat): Construct and add target vector.
* config/powerpc/obsd.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o. Add inf-ptrace.o.
(NAT_FILE): Remove.
* Makefile.in (ppcobsd-nat.o): Update dependencies.
* ppcobsd-tdep.c: Include "floatformat.h".
(ppcobsd_init_abi): Set long_double_bit and long_double_format.
* Makefile.in (ppcobsd-tdep.o): Update dependencies.
* ppcobsd-tdep.c: Fix typo in comment.
(_initialize_ppcobsd_tdep): Register GDB_OSABI_OPENBSD_ELF for
bfd_arch_rs6000 too.
2005-04-15 Kevin Buettner <kevinb@redhat.com>
* remote.c (remote_get_thread_local_address): Throw a more
meaningful exception when remote target doesn't have support
for the qGetTLSAddr packet.
2005-04-15 Kevin Buettner <kevinb@redhat.com>
* remote.c (remote_protocol_qGetTLSAddr): New static global variable.
(set_remote_protocol_qGetTLSAddr_packet_cmd)
(show_remote_protocol_qGetTLSAddr_packet_cmd)
(remote_get_thread_local_address): New functions.
(init_all_packet_configs): Initialize remote_protocol_qGetTLSAddr
variable.
(init_remote_ops): Initialize ``to_get_thread_local_address'' in
target vector.
(show_remote_cmd): Call show_remote_protocol_qGetTLS_Addr_packet_cmd().
(_initialize_remote): Register the following commands:
"set remote get-thread-local-storage-address-packet" and
"show remote get-thread-local-address-packet".
2005-04-15 Kevin Buettner <kevinb@redhat.com>
* remote.c (add_packet_config_cmd): Delete unused variables.
2005-04-15 Kevin Buettner <kevinb@redhat.com>
* remote.c (show_remote_protocol_vcont_packet_cmd )
(show_remote_protocol_qSymbol_packet_cmd)
(show_remote_protocol_P_packet_cmd)
(show_remote_protocol_Z_software_bp_packet_cmd)
(show_remote_protocol_Z_hardware_bp_packet_cmd)
(show_remote_protocol_Z_write_wp_packet_cmd)
(show_remote_protocol_Z_read_wp_packet_cmd)
(show_remote_protocol_Z_access_wp_packet_cmd)
(show_remote_protocol_binary_download_cmd)
(show_remote_protocol_qPart_auxv_packet_cmd)
(show_remote_protocol_p_packet_cmd ): Delete calls to
deprecated_show_value_hack().
2005-04-15 Corinna VInschen <vinschen@redhat.com>
* MAINTAINERS: Change sh64-elf state to non-broken.
* Makefile.in: Fix dependencies for sh64-tdep.o.
* configure.tgt: Add sh64-*-elf case.
* sh-tdep.c (sh_gdbarch_init): Reactivate bfd_mach_sh5 case.
* sh64-tdep.c: Rework to replace all deprecated mechanisms with
modern methods.
* config/sh/embed.mt (TDEPFILES): Add sh64-tdep.o.
* config/sh/sh64.mt: Resurrect.
2005-04-15 Kei Sakamoto <sakamoto.kei@renesas.com>
* regformats/reg-m32r.dat: New file.
2005-04-14 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (fp_model_strings): Add terminating NULL.
(arm_abi_strings, arm_abi_global, arm_abi_string): New
variables.
(arm_extract_return_value, arm_store_return_value): Don't use
arm_get_fp_model.
(arm_get_fp_model, arm_set_fp): Delete.
(arm_update_current_architecture): New function.
(set_fp_model_sfunc): Call arm_update_current_architecture.
(show_fp_model): Update output messages.
(arm_set_abi, arm_show_abi): New functions.
(arm_elf_osabi_sniffer): Only handle ELFOSABI_ARM.
(arm_gdbarch_init): Infer the object's ABI separately from its
OSABI. Search for a matching architecture. Honor the global
ABI and FPU settings. Set floating point format based on the
architecture.
(arm_init_abi_eabi_v1, arm_init_abi_eabi_v2, arm_init_abi_apcs):
Delete.
(_initialize_arm_tdep): Don't call gdbarch_register_osabi.
Create "arm set abi" command.
* arm-tdep.h (arm_get_fp_model): Delete prototype.
(enum arm_abi_kind): New type.
(struct gdbarch_tdep): Add arm_abi field.
* arm-linux-tdep.c (arm_linux_init_abi): Only override
tdep->fp_model if it is ARM_FLOAT_AUTO.
* armnbsd-tdep.c (arm_netbsd_aout_init_abi): Likewise.
(arm_netbsd_elf_init_abi): Likewise.
* defs.h (enum gdb_osabi): Delete ARM-specific OSABIs.
* osabi.c (gdb_osabi_name): Likewise.
2005-04-11 Daniel Jacobowitz <dan@codesourcery.com>
* config/djgpp/fnchange.lst: Remove entries for gdb.gdbserver.
2005-04-10 Mark Kettenis <kettenis@gnu.org>
* rs6000-tdep.c (ppc_supply_fpregset): Increment offset by 8 for
floating-point registers.
(ppc_collect_fpregset): Likewise. Fix collection of registers.
2005-04-09 Mark Kettenis <kettenis@gnu.org>
* ppcobsd-tdep.c: Update copyright year. Include "trad-frame.h"
and "tramp-frame.h".
(ppcobsd_sigtramp_cache_init): New function.
(ppcobsd_sigtramp): New variable.
(ppcobsd_init_abi): Prepend signal trampoline unwinder.
* Makefile.in (ppcobsd-tdep.o): Update dependencies.
2005-04-08 Andrew Cagney <cagney@gnu.org>
* MAINTAINERS (GDB/MI): Andrew Cagney, Elena Zannoni, and Fernando
Nasser have decided to step back from GDB/MI.
2005-04-08 Daniel Jacobowitz <dan@codesourcery.com>
* config/fnchange.lst: Add testsuite/gdb.gdbserver entries.
2005-04-08 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2-frame.c (struct dwarf2_frame_cache): New field
undefined_retaddr.
(dwarf2_frame_cache): Initialize undefined_retaddr.
(dwarf2_frame_this_id): Return an invalid frame ID if
undefined_retaddr.
2005-04-05 Jim Blandy <jimb@redhat.com>
Move construction of IA-32 vector types to i386-tdep.c.
* gdbtypes.c (build_builtin_type_vec64i,
build_builtin_type_vec128i): Delete functions.
(builtin_type_vec64i, builtin_type_vec128i): Delete variables.
(build_gdbtypes): Don't initialize them.
(_initialize_gdbtypes): Don't register GDBARCH swap entries for
them.
* gdbtypes.h (builtin_type_vec64i, builtin_type_vec128i): Delete
declarations.
(builtin_type_v2_float, builtin_type_v2_int32,
builtin_type_v4_int16, builtin_type_v8_int8,
builtin_type_v2_double, builtin_type_v4_float,
builtin_type_v2_int64, builtin_type_v4_int32,
builtin_type_v8_int16, builtin_type_v16_int8): Add extern
declarations.
* i386-tdep.c (i386_mmx_type, i386_sse_type): New variables.
(i386_build_mmx_type, i386_build_sse_type): New functions.
(i386_register_type): Call them, rather than referring to
builtin_type_vec64i and builtin_type_vec128i.
2005-04-02 Daniel Jacobowitz <dan@codesourcery.com>
* mips-linux-tdep.c (mips_linux_o32_sigframe_init): Adjust
big-endian correction code to not offset 32-bit registers.
Locate floating point registers correctly.
2005-04-02 Mark Kettenis <kettenis@gnu.org>
* main.c: Update copyright year.
(captured_main): Avoid using strcpy and strcat.
2005-04-01 Michael Snyder <msnyder@redhat.com>
* dummy-frame.c (dummy_frame_sniffer): Optimization: don't bother
computing this_id if there are no dummy frames on the stack.
* mn10300-tdep.c (mn10300_frame_unwind_cache): Use
find_partial_func instead of unwind_pc to identify frame.
(mn10300_push_dummy_call): Handle struct args, struct_return.
* mn10300-prologue.c (set_movm_offsets): Don't test variable
before setting it.
* mn10300-tdep.c (mn10300_skip_prologue): Use analyze_prologue
instead of skip_prologue_using_sal.
2005-03-31 Kevin Buettner <kevinb@redhat.com>
* solib-frv.c (struct lm_info): Add new field ``lm_addr''.
(main_lm_addr): New static global.
(frv_current_sos): Retain the link map address for each entry.
(frv_clear_solib): Clear main_lm_addr.
(frv_fetch_objfile_link_map): New function.
* frv-tdep.c (frv_gdbarch_init): Register TLS load module fetcher.
* frv-tdep.h (frv_fetch_objfile_link_map): Declare.
2005-03-31 Kevin Buettner <kevinb@redhat.com>
* gdbarch.sh (fetch_tls_load_module_address): New architecture method.
* gdbarch.c, gdbarch.h: Regenerate.
* dwarf2loc.c (dwarf_expr_tls_address): Fetch TLS load module
address and pass this address, instead of the objfile address, to
target_get_thread_local_address().
* linux-thread-db.c (thread_db_get_thread_local_address): Change
second parameter from type ``struct objfile *'' to CORE_ADDR. Do
not call svr4_fetch_objfile_link_map() to fetch the load module
address.
* target.h (struct target_ops): Change second parameter of
``to_get_thread_local_address'' from ``struct objfile *'' to
``CORE_ADDR''.
* alpha-linux-tdep.c (solib-svr4.h): Include.
(alpha_linux_init_abi): Register TLS load module fetcher.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* hppa-linux-tdep.c (hppa_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* ia64-linux-tdep.c (solib-svr4.h): Include.
(ia64_linux_init_abi): Register TLS load module fetcher.
* m32r-linux-tdep.c (m32r_linux_init_abi): Likewise.
* m68klinux-tdep.c (m68k_linux_init_abi): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* s390-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (solib-svr4.h): Include.
(sparc64_linux_init_abi): Register TLS load module fetcher.
* Makefile.in (alpha-linux-tdep.o, ia64-linux-tdep.o)
(sparc-linux-tdep.o): Update dependencies.
2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* c-valprint.c (c_value_print): Fix up some formatting. Use
check_typedef.
2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* arm-linux-nat.c (store_register, store_regs): Handle
ARM_PS_REGNUM.
2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* arm-linux-tdep.c (arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint): New. Update comments.
(arm_linux_init_abi): Set Thumb breakpoints also.
2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (arm-tdep.o): Update dependencies.
* arm-tdep.c: Include "objfiles.h" and "dwarf2-frame.h".
(arm_gdbarch_init): Register dwarf2_frame_sniffer.
2005-03-28 Joel Brobecker <brobecker@adacore.com>
* irix5-nat.c (supply_fpregset): Fix bug that caused the FSR
register value to be incorrectly written in the regcache.
(fill_fpregset): Fix bug that caused the FSR register value
to be incorrectly read from the regcache.
2005-03-28 Daniel Jacobowitz <dan@codesourcery.com>
* remote-rdi.c (arm_rdi_insert_breakpoint): Don't call
arm_pc_is_thumb_dummy.
2005-03-28 Mark Kettenis <kettenis@gnu.org>
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Handle
StackGhost.
* sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow):
Handle StackGhost in 64-bit code.
* sparc64-tdep.c (sparc64_frame_prev_register): Handle StackGhost.
2005-03-27 Christopher Faylor <cgf@timesys.com>
* win32-nat.c (handle_exception): Treat win32 routines which check for
valid addresses as "special" and don't stop when a SEGV is detected.
(get_child_debug_event): Properly flag exception as unhandled.
2005-03-26 Daniel Jacobowitz <dan@codesourcery.com>
* cp-support.c (cp_class_name_from_physname): Rewrite.
(unqualified_name_from_comp): New function, broken out from
method_name_from_physname. Correct handling for typed names
and templates.
(method_name_from_physname): Use unqualified_name_from_comp.
(cp_func_name, remove_params): Move earlier in the file. Add
better comments. Use the component tree to parse the name.
(_initialize_cp_support): Remove stray whitespace.
2005-03-26 Mark Kettenis <kettenis@gnu.org>
* exec.c (bfdsec_to_vmap): Use strcmp instead of DEPRECATED_STREQ.
* inflow.h: Update copyright year. Remove #ifdef SHORT_PGRP code.
Callapse HAVE_TERMIO and HAVE_SGTTY.
* dwarf2-frame.c (execute_cfa_program): Implement
DW_CFA_GNU_window_save.
2005-03-25 Mark Kettenis <kettenis@gnu.org>
* config/sparc/nbsd64.mh (NAT_FILE): Remove.
* config/i386/obsd64.mt (TDEPFILES): Add obsd-uthread.o.
2005-03-25 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (target_is_thumb, caller_is_thumb)
(arm_pc_is_thumb_dummy): Remove.
(arm_breakpoint_from_pc): Don't call arm_pc_is_thumb_dummy.
2005-03-25 Anthony Green <green@redhat.com>
* remote.c (remote_store_registers): Fix memset usage.
* std-regs.c (value_of_builtin_frame_reg): Ditto.
(value_of_builtin_frame_fp_reg): Ditto.
(value_of_builtin_frame_reg): Ditto.
2005-03-25 Mark Mitchell <mark@codesourcery.com>
* ser-base.c (ser_unix_write): Rename to ...
(ser_base_write): ... this.
(ser_unix_nop_flush_output): Rename to ...
(ser_base_flush_output): ... this.
(ser_unix_flush_input): Rename to ...
(ser_base_flush_input): ... this.
(ser_unix_nop_send_break): Rename to ...
(ser_base_send_break): ... this.
(ser_unix_nop_drain_output): Rename to ...
(ser_base_drain_output): ... this.
(ser_unix_nop_raw): Rename to ...
(ser_base_raw): ... this.
(ser_unix_nop_get_tty_state): Rename to ...
(ser_base_set_tty_state): ... this.
(ser_unix_nop_noflush_set_tty_state): Rename to ...
(ser_base_noflush_set_tty_state): ... this.
(ser_unix_nop_print_tty_state): Rename to ...
(ser_base_print_tty_state): ... this.
(ser_unix_nop_setbaudrate): Rename to ...
(ser_base_setbaudrate): ... this.
(ser_unix_nop_setstopbits): Rename to ...
(ser_base_setstopbits): ... this.
(ser_unix_async): Rename to ...
(ser_base_async): ... this.
* ser-base.h (ser_unix_write): Rename to ...
(ser_base_write): ... this.
(ser_unix_nop_flush_output): Rename to ...
(ser_base_flush_output): ... this.
(ser_unix_flush_input): Rename to ...
(ser_base_flush_input): ... this.
(ser_unix_nop_send_break): Rename to ...
(ser_base_send_break): ... this.
(ser_unix_nop_drain_output): Rename to ...
(ser_base_drain_output): ... this.
(ser_unix_nop_raw): Rename to ...
(ser_base_raw): ... this.
(ser_unix_nop_get_tty_state): Rename to ...
(ser_base_set_tty_state): ... this.
(ser_unix_nop_noflush_set_tty_state): Rename to ...
(ser_base_noflush_set_tty_state): ... this.
(ser_unix_nop_print_tty_state): Rename to ...
(ser_base_print_tty_state): ... this.
(ser_unix_nop_setbaudrate): Rename to ...
(ser_base_setbaudrate): ... this.
(ser_unix_nop_setstopbits): Rename to ...
(ser_base_setstopbits): ... this.
(ser_unix_async): Rename to ...
(ser_base_async): ... this.
* ser-pipe.c (_initialize_ser_pipe): Update accordingly.
* ser-tcp.c (_initialize_ser_tcp): Likewise.
* ser-unix.c (hardwire_flush_input): Likewise.
(_initializer_ser_hardwire): Likewise.
* Makefile.in (SFILES): Add ser-base.c.
(ser_base_h): New variable.
(ser-base.o): New target.
(ser-pipe.o): Depend on $(ser_base_h).
(ser-tcp.o): Likewise.
(ser-unix.o): Likewise. Do not depend on $(event_loop_h).
* configure.ac (SER_HARDWIRE): Include ser-base.o where
appropriate.
* ser-base.c: New file.
(push_event): Move from ser-unix.c.
(fd_event): Likewise.
(reschedule): Likewise.
(ser_unix_write): Likewise.
(ser_unix_nop_flush_output): Likewise.
(ser_unix_flush_input): Likewise.
(ser_unix_nop_send_break): Likewise.
(ser_unix_nop_drain_output): Likewise.
(ser_unix_nop_raw): Likewise.
(ser_unix_nop_get_tty_state): Likewise.
(ser_unix_nop_set_tty_state): Likewise.
(ser_unix_nop_noflush_set_tty_state): Likewise.
(ser_unix_nop_print_tty_state): Likewise.
(ser_unix_nop_setbaudrate): Likewise.
(ser_unix_nop_setstopbits): Likewise.
(ser_unix_async): Likewise.
* ser-base.h: New file.
* ser-pipe.c (ser-base.h): Include it.
* ser-tcp.c (ser-base.h): Likewise.
* ser-unix.h (ser_unix_nop_flush_output): Remove.
(ser_unix_flush_input): Likewise.
(ser_unix_nop_send_break): Likewise.
(ser_unix_nop_raw): Likewise.
(ser_unix_nop_get_tty_state): Likewise.
(ser_unix_nop_set_tty_state): Likewise.
(ser_unix_nop_print_tty_state): Likewise.
(ser_unix_nop_noflush_set_tty_state): Likewise.
(ser_unix_nop_setbaudrate): Likewise.
(ser_unix_nop_setstopbits): Likewise.
(ser_unix_nop_drain_output): Likewise.
(ser_unix_wait_for): Likewise.
(ser_unix_write): Likewise.
(ser_unix_async): Likewise.
* ser-unix.c (event-loop.h): Do not include it.
(push_event): Move to ser-base.c.
(fd_event): Likewise.
(reschedule): Likewise.
(ser_unix_write): Likewise.
(ser_unix_nop_flush_output): Likewise.
(ser_unix_flush_input): Likewise.
(ser_unix_nop_send_break): Likewise.
(ser_unix_nop_drain_output): Likewise.
(ser_unix_nop_raw): Likewise.
(ser_unix_nop_get_tty_state): Likewise.
(ser_unix_nop_set_tty_state): Likewise.
(ser_unix_nop_noflush_set_tty_state): Likewise.
(ser_unix_nop_print_tty_state): Likewise.
(ser_unix_nop_setbaudrate): Likewise.
(ser_unix_nop_setstopbits): Likewise.
(ser_unix_async): Likewise.
(ser_unix_wait_for): Make it static.
* configure: Regenerated.
2005-03-25 Mark Kettenis <kettenis@gnu.org>
* dwarf2-frame.h: Update copyrigh year.
(enum dwarf2_frame_reg_rule): Add DWARF2_FRAME_REG_RA_OFFSET.
* dwarf2-frame.c: Update copyright year.
(struct dwarf2_frame_cache): Add member `retaddr_reg'.
(dwarf2_frame_cache): Deal with DWARF2_FRAME_REG_RA_OFFSET.
(dwarf2_frame_prev_register): Handle DWARF2_FRAME_REG_RA_OFFSET.
2005-03-23 Martin Hunt <hunt@redhat.com>
* configure.ac: Remove -fwritable-strings from CFLAGS.
* configure: Regenerate.
2005-03-21 Michael Snyder <msnyder@redhat.com>
* mn10300-prologue.c (fix_frame_pointer): Delete.
(set_movm_offsets) Don't return just because movm_args is
zero -- still need to save pc and sp in saved_regs.
(mn10300_analyze_prologue): Don't return prematurely without
calling set_movm_offsets (for pc and sp at minimum).
2005-03-21 Mark Mitchell <mark@codesourcery.com>
* configure.ac (stat.st_blksize): Check for it.
(getuid): Likewise.
(getgid): Likewise.
* configure: Regenerated.
* config.in: Likewise.
* remote-fileio.c (remote_fileio_to_fio_stat): Check
HAVE_STRUCT_STAT_ST_BLKSIZE.
2005-03-21 Christopher Faylor <cgf@timesys.com>
* win32-nat.c (do_initial_child_stuff): Don't clear the thread list
here.
(do_initial_child_stuff): Move clearing of thread list to a place
before a thread ould be created.
(child_attach): Ditto.
2005-03-21 Michael Snyder <msnyder@redhat.com>
* mn10300-tdep.c (mn10300_frame_unwind_cache): Use func addr
instead of pc addr for frame_id. Otherwise "until" won't work.
2005-03-21 Kevin Buettner <kevinb@redhat.com>
* frv-linux-tdep.c (frv_linux_sigcontext_reg_addr): Fix typo in
comment.
2005-03-20 Mark Kettenis <kettenis@gnu.org>
* dwarf2loc.c (dwarf_expr_tls_address): Mark addr as volatile.
* varobj.c (my_value_equal): Mark val2 as volatile.
* cp-names.y: Add prototype for yyparse.
2005-03-19 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2loc.c (dwarf_expr_tls_address): Initialize ADDR.
* gnu-v3-abi.c (gnuv3_baseclass_offset): Update type of
VALADDR.
2005-03-18 Kevin Buettner <kevinb@redhat.com>
* Makefile.in (dwarf2loc.o, linux-thread-db.o): Add dependencies.
* exceptions.h (TLS_NO_LIBRARY_SUPPORT_ERROR, TLS_GENERIC_ERROR)
(TLS_LOAD_MODULE_NOT_FOUND_ERROR, TLS_NOT_ALLOCATED_YET_ERROR):
New error/exception enums.
* dwarf2loc.c (exceptions.h): Include.
(dwarf_expr_tls_address): Invoke target_get_thread_local_address()
via TRY_CATCH mechanism. Print error messages for TLS related
exceptions.
* linux-thread-db.c (thread_db_get_thread_local_address): Throw
exceptions instead of printing errors.
2005-03-18 Mark Kettenis <kettenis@gnu.org>
* utils.c (safe_strerror): Use xsnprintf instead of sprintf.
(decimal2str, octal2str): Change to return a string allocated by
get_cell. Use xsnprint instead of snprintf.
(paddr_u, paddr_d): Adjust for changed calling convention of
decimal2str.
(phex, phex_nz, hex_string): Use xsnprintf instead of snprintf.
(int_string): Likewise. Adjust for changed calling convention of
decimal2str and octal2str.
2005-03-18 Kevin Buettner <kevinb@redhat.com>
* frv-linux-tdep.c (frv_linux_sigcontext_reg_addr): Update comments.
Adjust incorrectly computed constant for realtime signal frame.
2005-03-18 Mark Kettenis <kettenis@gnu.org>
From Ralf Corsepius <ralf.corsepius@rtems.org>
* configure.tgt: Add m68*-*-rtems*.
2005-03-17 Mark Kettenis <kettenis@gnu.org>
* defs.h (xsnprintf): New prototype.
* utils.c (xsnprintf): New function.
* corelow.c (get_core_register_section): Replace usage of sprintf
and strcpy with xstrprintf and xstrdup.
* mips-tdep.c (mips_single_step_through_delay): Put back check for
breakpoint lost with the introduction of this function.
2005-03-17 Paul Brook <paul@codesourcery.com>
* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Fix broken logic.
* s390-tdep.c (s390_dwarf_reg_to_regnum): Ditto.
2005-03-16 Mark Mitchell <mark@codesourcery.com>
* event-top.c (handle_sigquit): Do not define for systems without
SIGQUIT.
(sigquit_token): Likewise.
(async_init_signals): Allow for systems that do not
define SIGQUIT.
* ser-tcp.c (net_open): Allow for systems that do not have SIGPIPE.
2005-03-15 Mark Mitchell <mark@codesourcery.com>
* utils.c (internal_vproblem): Guard call to fork with
HAVE_WORKING_FORK.
* cli/cli-cmds.c (shell_escape): Guard call to vfork with
HAVE_WORKING_VFORK and HAVE_WORKING_FORK.
* remote-fileo.c (remote_fileio_mode_to_host): Accomodate lack of
S_IRGRP and related macros.
(remote_fileio_mode_to_target): Likewise.
2005-03-14 Ben Elliston <bje@au.ibm.com>
* Makefile.in (CLIBS): Link libbfd after libopcodes, as it is a
more primitive library.
2005-03-13 Mark Kettenis <kettenis@gnu.org>
* inf-ttrace.c (inf_ttrace_pid_to_str): Use snprintf instead of
sprintf.
* target.c (normal_pid_to_str): Likewise.
* remote.c (remote_pid_to_str): Use snprint instead of sprintf.
Change capitalization of "thread". Use ptid_get_pid instead of
GETPID.
* cp-abi.c (set_cp_abi_as_auto_default): Use xasprintf instead of
a combination of xmalloc and sprintf.
2005-03-13 Jim Blandy <jimb@redhat.com>
* configure.ac: Use '=', not '=='; the latter is a GNU extension.
* configure: Regenerated.
2005-03-11 Michael Snyder <msnyder@redhat.com>
* mn10300-tdep.c (mn10300_dummy_unwind_dummy_id): Replace
stub fn with real implementatin mn10300_unwind_dummy_id.
(mn10300_push_dummy_call): Implement. Bare bones version,
does not handle structs or floats.
2005-03-11 Jim Blandy <jimb@redhat.com>
Avoid warnings due to the use of -Wuninitialized without -O.
* configure.ac (build_warnings): Include -Wuninitialized only if
CFLAGS is unset at configure time, or CFLAGS is set and includes
some -O option other than -O0.
* configure: Regenerated.
* mips-tdep.c (show_mips_abi): Change calling conventions to match
those expected by add_setshow_enum_cmd. Use 'file' argument as
appropriate.
2005-03-10 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (SFILES): Add cp-names.y.
(libiberty_h, safe_ctype_h): New.
(YYFILES): Add cp-names.c.
(YYOBJ): Add cp-names.o.
(test-cp-names.o, test-cp-names$(EXEEXT), cp-names.o): New rules.
(clean): Remove test-cp-names$(EXEEXT).
(local-maintainer-clean): Remove cp-names.c.
* cp-names.y: New file.
* cp-support.c (find_last_component): Delete.
(d_left, d_right): Define.
(cp_canonicalize_string, mangled_name_to_comp): New functions.
(cp_class_name_from_physname, method_name_from_physname): Rewrite
to use mangled_name_to_comp.
* cp-support.h (cp_canonicalize_string, cp_demangled_name_to_comp)
(cp_comp_to_string): New prototypes.
* config/djgpp/fnchange.lst: Add cp-names.c.
2005-03-10 Bob Rossi <bob@brasko.net>
* main.c (print_gdb_help): Remove the --[no]async help message.
2005-03-10 Mark Kettenis <kettenis@gnu.org>
* proc-api.c: Update copyright year.
(_initialize_proc_api): Revert previous patch, removing spurious
space instead.
2005-03-09 Joel Brobecker <brobecker@adacore.com>
* regcache.c: Fix typo in comment.
2005-03-09 David Lecomber <david@lecomber.net>
* proc-api.c (_initialize_proc_api): Fix invalid multi-line
i18n text.
2005-03-09 Mark Kettenis <kettenis@gnu.org>
* sparc-tdep.c (sparc_frame_cache): Adjust cached frame base
address for 64-bit code.
(sparc_unwind_dummy_id): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Adjust for new
frame base address convention.
(sparc64_push_dummy_call): Likewise.
* sparc64nbsd-tdep.c: Update copyright year.
(sparc64nbsd_sigcontext_frame_cache): Adjust cached frame base
address for 64-bit code.
(sparc64nbsd_init_abi): Tweak comment.
* sparc64obsd-tdep.c: Update copyright year.
(sparc64obsd_frame_cache): Adjust cached frame base address for
64-bit code.
(sparc64obsd_init_abi): Tweak comment.
2005-03-09 Corinna Vinschen <vinschen@redhat.com>
* exceptions.h (TRY_CATCH): Define setjmp/sigsetjmp macro safe.
2005-03-09 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (dwarf_decode_lines): Use the complete filename
when creating include psymtabs.
2005-03-08 Mark Mitchell <mark@codesourcery.com>
* environ.h (struct environ): Rename to ...
(struct gdb_environ): ... this.
(make_environ): Update prototype.
(free_environ): Likewise.
(init_environ): Likewise.
(get_in_environ): Likewise.
(set_in_environ): Likewise.
(unset_in_environ): Likewise.
(environ_vector): Likewise.
* environ.c (make_environ): Replace "struct environ" with "struct
gdb_environ".
(free_environ): Likewise.
(init_environ): Likewise.
(environ_vector): Likewise.
(get_in_environ): Likewise.
(set_in_environ): Likewise.
(unset_in_environ): Likewise.
* infcmd.c (inferior_environ): Likewise.
* inferior.h (inferior_environ): Likewise.
2005-03-08 Joel Brobecker <brobecker@adacore.com>
* infcmd.c (run_command_1): New function, extracted from
run_command.
(run_command): Replace implementation by call to run_command_1.
(start_command): Use run_command_1 to insert the temporary
breakpoint and run the program. Remove code that's no longer
needed, as already done at the proper time by run_command_1.
2005-03-08 Daniel Jacobowitz <dan@codesourcery.com>
* symfile.c (clear_symtab_users): Call
clear_current_source_symtab_and_line first.
2005-03-08 Nathan Sidwell <nathan@codesourcery.com>
* ax-gdb.c (gen_expr): Add UNOP_PLUS case.
* c-exp.y (exp): Add unary plus.
* eval.c (evaluate_subexp_standard): Add UNOP_PLUS case.
* valarith.c (value_x_unop): Add UNOP_PLUS case.
(value_pos): New.
* value.h (value_pos): Declare.
* remote.c (MIN_REMOTE_PACKET_SIZE): Set to 20.
(remote_fetch_registers): Allow uppercase hex when resyncing.
(remote_write_bytes): Only call get_memory_write_packet_size once.
Robustify packet size calculation for very small packets. Check
that at least one byte will be written.
* tracepoint.c (target_is_remote): Allow extended-remote.
(struct collection_list): Allow 256 registers, like the comment
said.
(add_memrange): Fix comment.
(read_actions): Turn EOF into 'end'.
2005-03-08 Corinna Vinschen <vinschen@redhat.com>
* Makefile.in: Add dependencies for iq2000-tdep.o.
* configure.tgt: Add iq2000-*-* target.
* iq2000-tdep.c: New file.
* config/iq2000/iq2000.mt: New file.
2005-03-07 Joel Brobecker <brobecker@adacore.com>
* doc/observer.texi (executable_changed): New observer.
* symtab.c: Include "observer.h".
(find_main_name): New function.
(main_name): If name_of_main is unset, then compute it
using find_main_name.
(symtab_observer_executable_changed): New function.
(_initialize_symtab): Attach executable_changed observer.
* exec.c: Include "observer.h".
(exec_file_attach): Emit executable_changed notification.
* symfile.c: Include "observer.h".
(reread_symbols): Send an executable_changed if appropriate.
* Makefile.in (exec.o): Add dependency on observer.h.
(symfile.o): Likewise.
(symtab.o): Likewise.
2005-03-07 Daniel Jacobowitz <dan@codesourcery.com>
* findvar.c (read_var_value): Don't allocate V when it will not
be used. Add missing break for LOC_INDIRECT.
2005-03-06 Mark Kettenis <kettenis@gnu.org>
* sparc64fbsd-tdep.c: Include "solib-svr4.h".
(sparc64fbsd_init_abi): Set skip_trampoline_code and
solib_svr4_fetch_link_map_offsets.
* Makefile.in (sparc64fbsd-tdep.o): Update dependencies.
2005-03-06 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (child_follow_fork): Call target_terminal_ours before
printing output. Use fprintf_unfiltered. Only print output when
debugging.
2005-03-05 Mark Kettenis <kettenis@gnu.org>
* sparc64-tdep.c (sparc64_store_floating_fields): Constify third
argument.
(sparc64_store_arguments): Constify.
2005-03-05 Mark Kettenis <kettenis@gnu.org>
* alphabsd-nat.c: Update copyright year. Include "inf-ptrace.h".
(alphabsd_fetch_inferior_registers): Rename from
fetch_inferior_registers. Make static.
(alphabsd_store_inferior_registers): Rename from
store_inferior_registers. Make static.
(_initialize_alphabsd_nat): New function.
* Makefile.in (alphabsd-nat.o): Update dependencies.
* config/alpha/fbsd.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o. Add inf-ptrace.o, fbsd-nat.o and gcore.o.
* config/alpha/nbsd.mh (NAT_CLIBS): Remove variable.
(NATDEPFILES): Remove infptrace.o and inftarg.o. Add
alphabsd-nat.o.
* config/alpha/nm-fbsd.h: Update copyright year. Don't include
"config/nm-bsd.h" and "elf/common.h".
* config/alpha/nm-nbsd.h: Update copyright year. Don't include
"config/nm-nbsd.h".
* mips64obsd-tdep.c (mips64obsd_init_abi): Don't set
software_single_step.
2005-03-04 Michael Snyder <msnyder@redhat.com>
* mn10300-prologue.c: New file. Prologue analysis.
* mn10300-tdep.c: Move REGNUM values to mn10300-tdep.h.
(mn10300_frame_unwind_cache): Don't call trad_frame_set_id
until after analyze_prologue, and don't call trad_frame_set_base
at all (let analyze_prologue do it).
2005-03-04 Michael Snyder <msnyder@redhat.com>
* trad-frame.c (trad_frame_set_reg_value): New function.
* trad-frame.h (trad_frame_set_reg_value): Export.
2005-03-04 Daniel Jacobowitz <dan@codesourcery.com>
* Makefile.in (remote.o): Update dependencies.
* remote.c: Include "observer.h".
2005-03-04 Daniel Jacobowitz <dan@codesourcery.com>
* target.c (target_read_memory_partial): Always initialize
ERR.
(target_write_memory_partial): Likewise.
2005-03-03 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_open_1): Call observer_notify_inferior_created.
2005-03-03 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (arm_make_stub_cache, arm_stub_this_id)
(arm_stub_unwind, arm_stub_unwind_sniffer): New.
(arm_gdbarch_init): Add arm_stub_unwind_sniffer.
2005-03-02 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (linux_supports_tracevforkdone, child_follow_fork):
Use LWP IDs.
2005-02-28 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2loc.c (loclist_read_variable): Set optimized_out
instead of reporting an error.
* valprint.c (value_check_printable): New function.
(common_val_print): New function. Use value_check_printable.
(value_print): Use value_check_printable.
* value.h (common_val_print): Add prototype.
* c-valprint.c (c_val_print): Use common_val_print.
* cp-valprint.c (cp_print_value_fields): Likewise.
(cp_print_hpacc_virtual_table_entries): Likewise.
* f-valprint.c (f_val_print): Likewise.
* jv-valprint.c (java_value_print, java_print_value_fields):
Likewise.
* scm-valprint.c (scm_value_print): Likewise.
* stack.c (print_frame_args): Likewise.
* varobj.c (c_value_of_variable): Likewise.
* p-valprint.c (pascal_val_print, pascal_value_print): Likewise.
(pascal_object_print_value_fields): Likewise. Update call to
pascal_object_print_static_field.
(pascal_object_print_static_field): Remove TYPE argument. Use
common_val_print.
2005-02-25 Mark Kettenis <kettenis@gnu.org>
Committed by Elena Zannoni <ezannoni@redhat.com>
* dwarf2read.c (dwarf2_build_psymtabs_hard): Adjust
info_ptr before building psymtabs for included files.
(create_all_comp_units): Initailize initial length size of
compilation header to zero.
(read_initial_length): Complain if both 32-bit and 64-bit DWARF
sections are encountered within the same compilation header.
(dwarf_decode_line_header): Pass compilation header in call to
read_initial_length.
2005-02-24 Andrew Cagney <cagney@gnu.org>
Add show_VARIABLE functions, update add_setshow call.
* varobj.c (_initialize_varobj, show_varobjdebug): Add and update.
* valprint.c (_initialize_valprint, show_print_max)
(show_stop_print_at_null, show_repeat_count_threshold)
(show_prettyprint_structs, show_unionprint)
(show_prettyprint_arrays, show_addressprint, show_input_radix)
(show_output_radix): Ditto.
* valops.c (_initialize_valops, show_overload_resolution): Ditto.
* utils.c (initialize_utils, show_chars_per_line)
(show_lines_per_page, show_demangle, show_pagination_enabled)
(show_sevenbit_strings, show_asm_demangle): Ditto
* tui/tui-win.c (_initialize_tui_win, show_tui_border_kind)
(show_tui_border_mode, show_tui_active_border_mode): Ditto.
* top.c (init_main, show_new_async_prompt)
(show_async_command_editing_p, show_write_history_p)
(show_history_size, show_history_filename, show_caution)
(show_annotation_level, init_main): Ditto.
* target.c (initialize_targets, show_targetdebug)
(show_trust_readonly): Ditto.
* symfile.c (_initialize_symfile, show_symbol_reloading)
(show_ext_args, show_download_write_size)
(show_debug_file_directory): Ditto.
* source.c (_initialize_source, show_lines_to_list): Ditto.
* solib.c (_initialize_solib, show_auto_solib_add)
(show_solib_search_path): Ditto.
* p-valprint.c (_initialize_pascal_valprint)
(show_pascal_static_field_print): Ditto.
* printcmd.c (_initialize_printcmd, show_max_symbolic_offset)
(show_print_symbol_filename): Add and update.
* parse.c (_initialize_parse, show_expressiondebug): Dito.
* observer.c (_initialize_observer, show_observer_debug): Dito.
* maint.c (_initialize_maint_cmds, show_watchdog)
(show_maintenance_profile_p): Dito.
* linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito.
* infrun.c (_initialize_infrun, show_debug_infrun)
(show_stop_on_solib_events, show_follow_fork_mode_string)
(show_scheduler_mode, show_step_stop_if_no_debug): Ditto.
* infcall.c (_initialize_infcall, show_coerce_float_to_double_p)
(show_unwind_on_signal_p): Ditto.
* gdbtypes.c (build_gdbtypes, show_opaque_type_resolution)
(_initialize_gdbtypes, show_overload_debug): Ditto.
* gdb-events.c, gdb-events.sh (_initialize_gdb_events)
(show_gdb_events_debug): Ditto.
* gdbarch.c, gdbarch.sh (show_gdbarch_debug)
(_initialize_gdbarch): Ditto.
* frame.c (_initialize_frame, show_backtrace_past_main)
(show_backtrace_past_entry, show_backtrace_limit)
(show_frame_debug): Ditto.
* exec.c (_initialize_exec, show_write_files): Ditto.
* dwarf2read.c (_initialize_dwarf2_read)
(show_dwarf2_max_cache_age): Ditto.
* demangle.c (_initialize_demangler)
(show_demangling_style_names): Ditto.
* dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto.
* cp-valprint.c (show_static_field_print)
(_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto.
* corefile.c (_initialize_core, show_gnutarget_string): Ditto.
* cli/cli-logging.c (_initialize_cli_logging)
(show_logging_overwrite, show_logging_redirect)
(show_logging_filename): Ditto.
* cli/cli-cmds.c (show_info_verbose, show_history_expansion_p)
(init_cli_cmds, show_baud_rate, show_remote_debug)
(show_remote_timeout, show_max_user_call_depth): Ditto.
* charset.c (show_host_charset_name, show_target_charset_name)
(initialize_charset): Ditto.
* breakpoint.c (show_can_use_hw_watchpoints)
(show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-23 Jim Blandy <jimb@redhat.com>
* disasm.c (gdb_disassemble_info): Call disassemble_init_for_target.
2005-02-23 Andrew Cagney <cagney@gnu.org>
* cli/cli-dump.c (dump_bfd_file): Replace magic constant with
SEC_XXX flags.
2005-02-22 Andrew Cagney <cagney@gnu.org>
* configure.ac: Only enaable insight when itcl is present.
* configure: Re-generate.
2005-02-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
Committed by Andrew Cagney.
* infptrace.c (store_register): Fix typo.
2005-02-21 Andrew Cagney <cagney@gnu.org>
* command.h (deprecated_add_set_cmd): Rename add_set_cmd.
* cli/cli-decode.h (add_set_cmd): Delete declaration.
* cli/cli-decode.c (deprecated_add_set_cmd): Rename add_set_cmd.
* i386-nat.c (_initialize_i386_nat): Update call.
* valprint.c (_initialize_valprint): Update comment.
* gnu-nat.c (_initialize_gnu_nat): Update call.
2005-02-21 Alan Modra <amodra@bigpond.net.au>
* elfread.c (elf_symtab_read): Discard section syms.
2005-02-21 Andrew Cagney <cagney@gnu.org>
* cli/cli-decode.c (add_set_enum_cmd): Delete function.
(deprecated_add_show_from_set): Delete function.
* command.h (add_set_enum_cmd): Delete declaration.
(deprecated_add_show_from_set): Delete declaration.
* cli/cli-decode.h (add_set_enum_cmd): Delete declaration.
(deprecated_add_show_from_set): Delete declaration.
* arm-tdep.c (_initialize_arm_tdep): Update comment.
* kod.c (kod_set_os): Simplify.
* infrun.c (set_schedlock_func): Simplify.
* cli/cli-dump.c (add_dump_command): Update comment.
Replace string variables with a filename completer with
add_setshow_optional_filename_cmd.
* solib.c, symfile.c: Update.
* cli/cli-setshow.c: Do not tidle expand the file.
Add more uses of add_setshow_string_cmd, add_setshow_integer_cmd,
and add_setshow_string_noescape_cmd.
* cli/cli-setshow.c (deprecated_show_value_hack): Do not print a
NULL command's value.
* kod.c, language.c, ocd.c, remote-e7000.c, remote-mips.c: Update.
* remote-sds.c, remote.c, symfile.c, top.c: Update.
2005-02-20 Andrew Cagney <cagney@gnu.org>
Use add_setshow_enum_cmd through out.
* arch-utils.c, charset.c, demangle.c, i386-tdep.c: Update.
* infrun.c, mips-tdep.c, osabi.c, serial.c, tui/tui-win.c: Update.
* mi/mi-main.c (captured_mi_execute_command): Use
mi_cmd_interpreter_exec.
* cli/cli-decode.c (add_setshow_optional_filename_cmd): New
function.
* cli/cli-setshow.c (deprecated_show_value_hack)
(do_setshow_command): Handle var_optional_filename.
* command.h (enum var_types): Add var_optional_filename.
(add_setshow_optional_filename_cmd): Declare.
* infcmd.c (notice_args_read): Use.
* symfile-mem.c (symbol_file_add_from_memory): Pass
target_read_memory to bfd_elf_bfd_from_remote_memory.
(do_target_read_memory): Delete.
2005-02-16 Mark Kettenis <kettenis@gnu.org>
* value.h (value_contents_equal): New prototype.
* value.c (value_contents_equal): New function.
* varobj.c: Include "exceptions.h" and "gdb_assert.h". Don't
include <math.h>.
(varobj_set_value): Initialize error to zero.
(varobj_update): Rename error2 to error and initialize it to zero.
Slightly change the wording of some comments.
(my_value_equal): Reimplement using TRY_CATCH and
value_contents_equal.
2005-02-18 Andrew Cagney <cagney@gnu.org>
* cli/cli-decode.c (add_setshow_integer_cmd): New function.
* command.h (add_setshow_integer_cmd): Declare.
* cli/cli-cmds.c: Update.
Use add_setshow_uinteger_cmd through out.
* printcmd.c, source.c, utils.c, valprint.c: Update.
Use add_setshow_zinteger_cmd through out. Re-sync gdbarch.sh
and gdbarch.c.
* breakpoint.c, frame.c, gdb-events.sh, gdbarch.sh: Update.
* gdbtypes.c, infrun.c, linux-nat.c, maint.c, monitor.c: Update.
* pa64solib.c, parse.c, remote-mips.c, ser-go32.c: Update.
* serial.c, solib-frv.c, somsolib.c, target.c, top.c: Update.
* varobj.c, cli/cli-cmds.c: Update.
* gdbarch.c, gdb-events.c: Regenerate.
Use add_setshow_boolean_command through out. Delete #ifdef 0'ed
code adding set/show boolean commands.
* cp-valprint.c, dcache.c, exec.c, gdbtypes.c, infrun.c: Update.
* monitor.c, p-valprint.c, pa64solib.c, printcmd.c: Update.
* proc-api.c, remote-mips.c, remote.c, solib.c: Update.
* somsolib.c, symfile.c, top.c, utils.c, valops.c: Update.
* valprint.c, win32-nat.c, wince.c, xcoffsolib.c: Update.
* cli/cli-cmds.c: Update.
2005-02-17 Andrew Cagney <cagney@gnu.org>
* cli/cli-decode.c (add_setshow_filename_cmd): Set the completer
to filename_completer.
* solib.c (_initialize_solib, reload_shared_libraries): Use
add_setshow_filename_cmd.
* serial.c (_initialize_serial): Ditto.
* remote-utils.c (_initialize_sr_support): Ditto.
* cli/cli-decode.c (add_setshow_string_noescape_cmd): New function.
* command.h (add_setshow_string_noescape_cmd): Declare.
* wince.c (_initialize_wince): Use.
* symfile.c (_initialize_symfile): Use.
(set_ext_lang_command): Update declaration.
* corefile.c (_initialize_core): Use.
* cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* command.h (fprint_setshow_ftype): Delete.
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete
fprint_setshow parameter.
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update.
* hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update.
* mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update
* remote.c, target.c, cli/cli-logging.c: Update.
2005-02-16 Andrew Cagney <cagney@gnu.org>
Merge setshow print and show parameters.
* command.h (show_value_ftype): Define.
(deprecated_show_value_hack): Declare.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_uinteger_cmd)
(add_setshow_zinteger_cmd): Change type of show_func to
show_value_ftype.
* cli/cli-decode.h (struct cmd_list_element): Replace
fprint_setshow with show_value_func.
* cli/cli-decode.c (add_setshow_cmd_full): Update show_func
parameter. Set show_value_func. Do not set cmd_sfunc.
(add_setshow_enum_cmd, add_setshow_auto_boolean_cmd)
(add_setshow_boolean_cmd, add_setshow_filename_cmd)
(add_setshow_string_cmd, add_setshow_uinteger_cmd)
(add_setshow_zinteger_cmd): Update.
* complaints.c (complaints_show_value): Replace
fprint_setshow_complaints.
(_initialize_complaints): Update.
* mips-tdep.c (show_mask_address): Update.
* arm-tdep.c (show_fp_model): Update.
* cli/cli-setshow.c (do_setshow_command): Call show_value_func
instead of fprint_setshow. Use deprecated_show_value_hack.
(deprecated_show_value_hack): New function.
* remote.c (add_packet_config_cmd, show_remote_cmd):
(show_remote_protocol_P_packet_cmd)
(show_remote_protocol_P_packet_cmd)
(show_remote_protocol_Z_access_wp_packet_cmd)
(show_remote_protocol_Z_hardware_bp_packet_cmd)
(show_remote_protocol_Z_packet_cmd)
(show_remote_protocol_Z_read_wp_packet_cmd)
(show_remote_protocol_Z_software_bp_packet_cmd)
(show_remote_protocol_Z_write_wp_packet_cmd)
(show_remote_protocol_binary_download_cmd)
(show_remote_protocol_p_packet_cmd)
(show_remote_protocol_qPart_auxv_packet_cmd)
(show_remote_protocol_qSymbol_packet_cmd)
(show_remote_protocol_vcont_packet_cmd): Update.
2005-02-16 Mark Kettenis <kettenis@gnu.org>
* wrapper.h: Update copyright year. Properly wrap a few
prototypes.
(struct gdb_wrapper_arguments): Remove forward declaration.
* wrapper.c: Update copyright year. Include "ui-out.h".
(struct gdb_wrapper_arguments): Remove.
(struct captured_value_struct_elt_args): Remove.
(wrapper_parse_exp_1, wrap_evaluate_expression)
(wrap_value_fetch_lazy, wrap_value_equal, wrap_value_assign)
(wrap_value_subscript, wrap_value_ind, wrap_parse_and_eval_type)
(do_captured_value_struct_elf): Remove functions.
(gdb_parse_exp_1, gdb_evaluate_expression, gdb_value_fetch_lazy)
(gdb_value_equal, gdb_value_assign, gdb_value_subscript)
(gdb_value_ind, gdb_parse_and_eval_type, gdb_value_struct_elt):
Re-implement using TRY_CATCH.
2005-02-16 Yoshinori Sato <ysato@users.sourceforge.jp>
* remote-e7000.c: unuse TM_FILE defined macro.
(e7000_fetch_registers)
(e7000_store_registers)
(e7000_wait): delete NUM_REALREGS.
* remote-hms.c: move TM_FILE macro.
(CCR_REGNO): move define from tm-h8300.h.
2005-02-15 Mark Kettenis <kettenis@gnu.org>
* amd64-linux-tdep.c: Update copyright year.
(amd64_linux_sigtramp_start): Use sizeof operator instead of
LINUX_SIGTRAMP_LEN.
2004-02-15 Joel Brobecker <brobecker@gnat.com>
From Paul Hilfinger <hilfinger@gnat.com>
* dwarf2read.c (new_symbol): Use SYMBOL_SEARCH_NAME rather than
SYMBOL_NATURAL_NAME to set type names.
2005-02-15 Andrew Cagney <cagney@gnu.org>
Mark up add_com, add_info and add_prefix_cmd.
* breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update.
* exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update.
* go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update.
* maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update.
* ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update.
* remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update.
* remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update.
* remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update.
* sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update.
* symfile.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, typeprint.c, utils.c, valprint.c: Update.
* win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update.
* tui/tui-stack.c, tui/tui-win.c: Update.
2005-02-14 Andrew Cagney <cagney@gnu.org>
* config/h8300/h8300.mt (DEPRECATED_TM_FILE): Delete.
* config/h8300/tm-h8300.h: Delete file.
Mark up add_cmd.
* arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update.
* cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update.
* exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update.
* infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update.
* mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update.
* reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update.
* sol-thread.c, source.c, stack.c, symfile-mem.c: Update.
* symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update.
* win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update.
* cli/cli-logging.c, tui/tui-regs.c: Update.
Mark up add_setshow functions, replace "PRINT:" comment prefix
with "FIXME: i18n:".
* aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update.
* cris-tdep.c, dwarf2read.c, frame.c, hppa-tdep.c: Update.
* infcall.c, m32r-rom.c, maint.c, mips-tdep.c: Update.
* nto-tdep.c, observer.c, remote-rdi.c, remote.c: Update.
* target.c, cli/cli-logging.c: Update.
* utils.c (paddress): New function.
* defs.h (paddress): Declare.
* printcmd.c (deprecated_print_address_numeric): Rename
print_address_numeric, call paddress.
* valprint.c, ui-out.c, tui/tui-stack.c, tracepoint.c: Update.
* symmisc.c, symfile.c stack.c, p-valprint.c, printcmd.c: Update.
* maint.c, m32r-rom.c, infcmd.c, f-valprint.c, exec.c: Update.
* dwarf2read.c, dve3900-rom.c, defs.h, c-valprint.c: Update.
* corefile.c, cli/cli-cmds.c, breakpoint.c, annotate.c: Update.
* ada-valprint.c: Update.
2005-02-13 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
* MAINTAINERS: Add myself to "Write After Approval".
2005-02-12 Yoshinori Sato <ysato@users.sourceforge.jp>
Restore h8300 support.
* configure.tgt: Add h8300-*-*
* h8300-tdep.c: New file. Rewrite new frame code.
* config/h8300/h8300.mt: New file. Restored Rev 1.3
* config/h8300/tm-h8300.h: New file. Restored Rev 1.21
* MAINTAINERS: Add myself to "Write After Approval".
2005-02-11 Andrew Cagney <cagney@gnu.org>
Mark up some of printf_filtered and printf_unfiltered.
* ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update.
* corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update.
* demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update.
* event-loop.c, event-top.c, exec.c, f-valprint.c: Update.
* gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update.
* mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update.
* ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update.
* remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update.
* stack.c, symfile.c, symmisc.c, target.c, thread.c: Update.
* top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update.
* cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update.
* tui/tui-regs.c, tui/tui-win.c: Update.
Mark up error_no_arg, query, perror_with_name, complaint, and
internal_error.
* breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update.
* cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update.
* dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update.
* exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update.
* frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update.
* gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update.
* go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update.
* i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update.
* infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update.
* interps.c, language.c, linespec.c, linux-nat.c: Update.
* m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update.
* m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update.
* macrotab.c, maint.c, mdebugread.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update.
* mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update.
* objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update.
* parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update.
* ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update.
* regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update.
* remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update.
* s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update.
* sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update.
* solib-aix5.c, solib-svr4.c, solib.c, source.c: Update.
* sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update.
* symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update.
* utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update.
* win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update.
* cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update.
* cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update.
* mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update.
* tui/tui-file.c, tui/tui-interp.c: Update.
2005-02-10 Andrew Cagney <cagney@gnu.org>
Mark up all error and warning messages.
* ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update.
* bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update.
* core-aout.c, core-regset.c, corefile.c, corelow.c: Update.
* cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update.
* dbxread.c, demangle.c, doublest.c, dsrec.c: Update.
* dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update.
* dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update.
* event-top.c, exec.c, expprint.c, f-lang.c: Update.
* f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update.
* frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update.
* gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update.
* hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update.
* hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update.
* hpread.c, hpux-thread.c, i386-linux-nat.c: Update.
* i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update.
* i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update.
* ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update.
* infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update.
* inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update.
* kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update.
* linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update.
* m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update.
* m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update.
* maint.c, mdebugread.c, mem-break.c, memattr.c: Update.
* mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update.
* nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update.
* observer.c, ocd.c, p-lang.c, p-typeprint.c: Update.
* p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update.
* ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update.
* remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update.
* remote-rdp.c, remote-sim.c, remote-st.c: Update.
* remote-utils.c, remote-utils.h, remote.c: Update.
* rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update.
* ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update.
* sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update.
* solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update.
* solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update.
* somread.c, somsolib.c, source.c, stabsread.c: Update.
* stack.c, std-regs.c, symfile-mem.c, symfile.c: Update.
* symmisc.c, symtab.c, target.c, thread.c, top.c: Update.
* tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update.
* uw-thread.c, valarith.c, valops.c, valprint.c: Update.
* value.c, varobj.c, version.in, win32-nat.c, wince.c: Update.
* xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update.
* cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update.
* cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update.
* mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update.
* mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update.
* mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update.
* tui/tui-win.c: Update.
2005-02-10 Ian Lance Taylor <ian@airs.com>
* MAINTAINERS: Update my e-mail address.
2005-02-10 Daniel Jacobowitz <dan@debian.org>
From Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>:
PR exp/1821
* cp-valprint.c: Include "language.h".
(cp_print_value_fields): Pass the current language to
fprintf_symbol_filtered.
* Makefile.in (cp-valprint.o): Update dependencies.
2005-02-10 Andrew Cagney <cagney@gnu.org>
* cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace
print string parameter with fprint_setshow function.
* command.h (fprint_setshow_ftype): Define. Update declarations.
* cli/cli-setshow.c (do_setshow_command): When fprint_setshow is
available, use that.
* cli/cli-decode.h (struct cmd_list_element): Add field
fprint_setshow.
* complaints.c (fprint_setshow_complaints): New function.
(_initialize_complaints): Pass to add_setshow_zinteger_cmd.
* hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter
with NULL.
* mips-tdep.c (_initialize_mips_tdep): Ditto.
* m32r-rom.c (_initialize_m32r_rom): Ditto.
* cris-tdep.c (_initialize_cris_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* remote-rdi.c (_initialize_remote_rdi): Ditto.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* dwarf2read.c (_initialize_dwarf2_read): Ditto.
* frame.c (_initialize_frame): Ditto.
* target.c (initialize_targets): Ditto.
* maint.c (_initialize_maint_cmds): Ditto.
* observer.c (_initialize_observer): Ditto.
* infcall.c (_initialize_infcall): Ditto.
* breakpoint.c (_initialize_breakpoint): Ditto.
* cli/cli-logging.c (_initialize_cli_logging): Ditto.
* remote.c (add_packet_config_cmd, _initialize_remote): Ditto.
* cli/cli-setshow.c (do_setshow_command): Move code printing the
value to the end of the function. Handle MI and non-MI output
differently.
2005-02-09 Andrew Cagney <cagney@gnu.org>
* cli/cli-decode.c (add_setshow_enum_cmd): Drop set_result and
show_result parameters.
* mips-tdep.c (_initialize_mips_tdep): Update calls.
* command.h: Update declaration.
* arm-tdep.c (_initialize_arm_tdep, _initialize_arm_tdep): Update
calls.
* NEWS: Mention removed commands.
* m68hc11-tdep.c (show_regs): Delete, unused.
(_initialize_m68hc11_tdep): Delete deprecated "regs" command.
* gdb-events.sh: Delete deprecated "set eventdebug" and "show
eventdebug" commands.
* gdb-events.c: Regenerate.
* gdbarch.sh: Delete deprecated "set archdebug" and "show
archdebug" commands.
* gdbarch.c: Regenerate.
* cli/cli-cmds.c (init_cli_cmds): Delete deprecated "set
remotedebug" and "show remotedebug".
* arm-tdep.c (_initialize_arm_tdep): Delete deprecated "set arm
disassembly-flavor", "show arm disassembly-flavor", and
"othernames" commands.
(arm_othernames): Delete unused function.
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call)
(convert_code_addr_to_desc_addr): Convert any function code
address to the corresponding function's descriptor.
(ppc64_sysv_abi_return_value): have TYPE_CODE_ENUM and
TYPE_CODE_INT use the same code paths as TYPE_CODE_INT. When
writing, convert any function code address to the corresponding
descriptor.
* config/sh/linux.mt (TDEPFILES): Add symfile-mem.o.
* config/powerpc/linux.mt (TDEPFILES): Ditto.
* config/pa/linux.mt (TDEPFILES): Ditto.
* config/mips/linux.mt (TDEPFILES): Ditto.
* config/m68k/linux.mt (TDEPFILES): Ditto.
* config/m32r/linux.mt (TDEPFILES): Ditto.
* config/ia64/linux.mt (TDEPFILES): Ditto.
* config/arm/linux.mt (TDEPFILES): Ditto.
2005-02-09 Corinna Vinschen <vinschen@redhat.com>
* symmisc.c: Include gdb_stat.h.
(maintenance_print_msymbols): Use inode numbers to compare files.
2005-02-08 Andrew Cagney <cagney@gnu.org>
* value.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
(METHOD_PTR_TO_VOFFSET): Move from here ...
* cp-support.h (METHOD_PTR_IS_VIRTUAL, METHOD_PTR_FROM_VOFFSET)
(METHOD_PTR_TO_VOFFSET): ... to here.
* cp-valprint.c, p-valprint.c, eval.c: Include "cp-support.h".
* Makefile.in: Update dependencies.
* exceptions.c: Do not include <setjmp.h>.
(SIGJMP_BUF, SIGSETJMP, SIGLONGJMP): Delete macros.
(catch_exception, catch_exceptions_with_msg, catch_errors)
(catch_command_errors): Use TRY_CATCH.
(struct catcher): Use EXCEPTIONS_SIGJMP_BUF.
(exceptions_state_mc_init): Rename catcher_init.
(exceptions_state_mc): Rename catcher_state_machine.
(exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1): New functions.
* exceptions.h: Include <setjmp.h>.
(EXCEPTIONS_SIGJMP_BUF, EXCEPTIONS_SIGSETJMP)
(EXCEPTIONS_SIGLONGJMP): Define.
(exceptions_state_mc_init, exceptions_state_mc_action_iter)
(exceptions_state_mc_action_iter_1): Declare.
(TRY_CATCH): Define.
* ppc-linux-tdep.c (ppc_linux_init_abi): Do not set malloc name,
no longer needed.
* ppc-linux-nat.c (ppc_register_u_addr): Hack around 64-bit
PT_FPSCR breakage.
* value.c (struct value): Move to here ...
* value.h (struct value): ... from here. Copy comments to
corresponding function declarations, re-order.
2005-02-07 Andrew Cagney <cagney@gnu.org>
* value.c (set_value_bitpos, set_value_bitsize): Define.
* value.h (set_value_bitpos, set_value_bitsize): Declare.
* ada-lang.c, valarith.c: Update.
* cp-valprint.c, c-valprint.c, infcall.c: Use value_contents or
value_contents_writeable, include note that there are problems.
* breakpoint.c, infcall.c: Use VALUE_LVAL.
* value.h (set_value_offset): Declare.
* value.c (set_value_offset): Declare.
* gnu-v2-abi.c, jv-valprint.c, valarith.c, valops.c: Update.
* findvar.c: Update.
* value.h (value_next): Declare.
* value.c (value_next): Define.
* breakpoint.c: Update.
* value.h (deprecated_set_value_modifiable)
(deprecated_value_modifiable): Declare.
* value.c (deprecated_set_value_modifiable): Define.
(deprecated_value_modifiable): Define.
* ada-lang.c, valops.c, breakpoint.c, tracepoint.c: Update.
* value.h (deprecated_set_value_type): Declare.
* value.c (deprecated_set_value_type): Define.
* hpacc-abi.c, gnu-v2-abi.c, cp-valprint.c: Update.
* c-valprint.c, jv-lang.c, objc-lang.c, ada-lang.c: Update.
* infcall.c, printcmd.c, valops.c, eval.c, p-exp.y: Update.
* ax-gdb.c, tracepoint.c: Update.
* value.h (deprecated_value_lval_hack)
(deprecated_value_address_hack)
(deprecated_value_internalvar_hack)
(deprecated_value_regnum_hack): Declare.
(VALUE_LVAL, VALUE_ADDRESS, VALUE_INTERNALVAR)
(VALUE_FRAME_ID, VALUE_REGNUM): Use.
* value.c (deprecated_value_lval_hack)
(deprecated_value_address_hack)
(deprecated_value_internalvar_hack)
(deprecated_value_regnum_hack): Define.
* value.h (VALUE_POINTED_TO_OFFSET): Delete.
(set_value_pointed_to_offset, value_pointed_to_offset): Declare.
* value.c (set_value_pointed_to_offset): Define
(value_pointed_to_offset): Define.
* valops.c: Update.
* value.h (VALUE_EMBEDDED_OFFSET): Delete.
(value_embedded_offset, set_value_embedded_offset): Declare.
* value.c (value_embedded_offset): Define.
(set_value_embedded_offset): Define.
* valops.c, p-valprint.c, mi/mi-main.c, hpacc-abi.c: Update.
* gnu-v3-abi.c, eval.c, c-valprint.c, cp-valprint.c: Update.
* cp-abi.h: Update.
* value.h (VALUE_LAZY): Delete
(set_value_lazy): Declare.
* value.c (set_value_lazy): Define.
* valops.c, valarith.c, jv-valprint.c, jv-lang.c: Update.
* gnu-v2-abi.c, findvar.c, dwarf2loc.c, ada-lang.c: Update.
2005-02-06 Andrew Cagney <cagney@gnu.org>
* value.h (VALUE_OPTIMIZED_OUT): Delete.
(value_optimized_out, set_value_optimized_out): Declare.
* value.c (set_value_optimized_out, value_optimized_out): Define.
* valprint.c, findvar.c, dwarf2loc.c: Update.
* value.c (value_contents, value_contents_writeable): New
functions.
* value.h (VALUE_CONTENTS): Delete macro.
(value_contents, value_contents_writeable): Declare.
* xstormy16-tdep.c, value.c, valops.c, valarith.c: Update.
* stack.c, sparc-tdep.c, sparc64-tdep.c, sh-tdep.c: Update.
* sh64-tdep.c, scm-valprint.c, scm-exp.c, s390-tdep.c: Update.
* rs6000-tdep.c, p-valprint.c, printcmd.c: Update.
* ppc-sysv-tdep.c, mips-tdep.c, mi/mi-main.c: Update.
* m88k-tdep.c, m68hc11-tdep.c, m32r-tdep.c: Update.
* jv-valprint.c, ia64-tdep.c, hppa-tdep.c: Update.
* hpacc-abi.c, f-valprint.c, frv-tdep.c, eval.c: Update.
* c-valprint.c, cris-tdep.c, cp-valprint.c: Update.
* cli/cli-dump.c, breakpoint.c, avr-tdep.c, arm-tdep.c: Update.
* arm-linux-tdep.c, amd64-tdep.c, alpha-tdep.c: Update.
* ada-valprint.c, ada-lang.c: Update.
2005-02-03 Andrew Cagney <cagney@gnu.org>
* utils.c (xzalloc): New function.
* defs.h (XZALLOC): Use xzalloc.
(xzalloc): Declare.
* value.c (allocate_value): Allocate a zeroed buffer.
* mdebugread.c (xzalloc): Delete.
2005-02-02 Andrew Cagney <cagney@gnu.org>
* value.h (value_lazy): Declare.
* varobj.c, value.c, valops.c, valarith.c, printcmd.c: Update.
* cp-valprint.c, breakpoint.c, ada-lang.c: Update.
* value.h (VALUE_CONTENTS_ALL): Delete.
(value_contents_all): Declare.
* value.c (value_contents_all): New function.
* hpacc-abi.c, cp-valprint.c, valops.c, c-valprint.c: Update.
* m68k-tdep.c, i386-tdep.c, infcall.c, valops.c: Update.
* value.c (value_enclosing_type): New function.
* value.h (VALUE_ENCLOSING_TYPE): Delete.
(value_enclosing_type): Declare.
* xstormy16-tdep.c, vax-tdep.c, m68k-tdep.c, i386-tdep.c: Update.
* gnu-v3-abi.c, hpacc-abi.c, infcall.c, valops.c: Update.
* value.c (value_contents_all_raw)
(value_contents_raw): New functions.
* value.h (VALUE_CONTENTS_ALL_RAW, VALUE_CONTENTS_RAW): Delete.
(value_contents_raw, value_contents_all_raw): Declare functions.
(VALUE_CONTENTS, VALUE_CONTENTS_ALL): Update.
* std-regs.c, valarith.c, valops.c, eval.c: Update.
* tracepoint.c, findvar.c: Update.
2005-02-01 Orjan Friberg <orjanf@axis.com>
* regformats/reg-cris.dat: New file with register definitions for CRIS.
* regformats/reg-crisv32.dat: Ditto for CRISv32.
2005-01-31 Andrew Cagney <cagney@gnu.org>
* configure: Regenerate to track ../gettext.m4.
2005-01-29 Baurzhan Ismagulov <ibr@radix50.net>
* MAINTAINERS: Add myself to "Write After Approval".
* ax-gdb.c, ax-general.c, bcache.c, bfd-target.c, bsd-kvm.c,
* buildsym.c, c-lang.c, c-typeprint.c, c-valprint.c, charset.c,
* coff-pe-read.c, coffread.c, complaints.c, copying.c: I18n markup.
2005-01-29 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Remove extra check for ranlib.
* configure: Regenerated.
2005-01-28 Andrew Cagney <cagney@gnu.org>
* language.h (struct language_defn): Make la_val_print's buffer
parameter a const bfd_byte.
* cp-valprint.c (cp_print_value_fields, cp_print_value): Update.
* ada-lang.c (ada_aligned_value_addr)
(ada_value_primitive_packed_val, ada_which_variant_applies): Update.
* valprint.c (val_print_array_elements): Update.
* valprint.h (val_print_array_elements): Update.
* ada-lang.h (ada_val_print, ada_aligned_value_addr)
(ada_value_primitive_packed_val, ada_which_variant_applies): Update.
* ada-valprint.c (ada_val_print, struct ada_val_print_args)
(ada_val_print_1, ada_print_floating, printable_val_type)
(print_record, val_print_packed_array_elements)
(print_field_values, print_variant_part): Update.
* c-lang.h (c_val_print, cp_print_value_fields): Update.
* c-valprint.c (c_val_print): Update.
* f-lang.h (f_val_print): Update.
* f-valprint.c (f_val_print, f77_print_array_1)
(f77_print_array): Update.
* jv-lang.h (java_val_print): Update.
* jv-valprint.c (java_print_value_fields, java_val_print): Update.
* language.c (unk_lang_val_print): Update.
* m2-lang.h (m2_val_print): Update.
* m2-valprint.c (m2_val_print): Update.
* p-lang.h (pascal_val_print): Update.
(pascal_object_print_value_fields): Update.
* p-valprint.c (pascal_val_print)
(pascal_object_print_value_fields, pascal_object_print_value)
(pascal_object_print_value): Update.
* scm-lang.h (scm_val_print): Update.
* scm-valprint.c (scm_val_print): Update.
* value.h (val_print): Update.
* p-lang.h (pascal_object_print_class_member)
(pascal_object_print_class_method): Make buffer a const bfd_byte.
* p-valprint.c (pascal_object_print_class_method)
(pascal_object_print_class_method): Ditto.
* language.h (struct language_defn): Make la_printstr's buffer
parameter a const bfd_byte.
* p-lang.h (pascal_printstr): Update function to match.
* ada-valprint.c (ada_printstr): Update function to match.
* scm-lang.c (scm_printstr): Update function to match.
* p-lang.c (pascal_printstr): Update function to match.
* ada-lang.h (ada_printstr): Update function to match.
* m2-lang.c (m2_printstr): Update function to match.
* objc-lang.c (objc_printstr): Update function to match.
* c-lang.h (c_printstr): Update function to match.
* f-lang.c (f_printstr): Update function to match.
* c-lang.c (c_printstr): Update function to match.
* language.c (unk_lang_printstr): Update function to match.
* valprint.c (val_print_type_code_int): Make buffer a const bfd_byte.
* valprint.h (val_print_type_code_int): Ditto.
* objc-lang.h (c_val_print, c_value_print): Delete declarations.
* cp-valprint.c (cp_print_class_method)
(cp_print_class_member): Make buffer a const bfd_byte.
* c-lang.h (cp_print_class_member, cp_print_class_method): Ditto.
* ada-lang.c (value_from_contents_and_address)
(to_record_with_fixed_variant_part)
(value_tag_from_contents_and_address, ada_to_fixed_type)
(to_fixed_variant_branch_type, to_fixed_record_type)
(ada_template_to_fixed_record_type, cond_offset_host)
(ada_template_to_fixed_record_type_1): Make buffer a const
bfd_byte.
* ada-lang.h (ada_template_to_fixed_record_type_1)
(value_from_contents_and_address, ada_to_fixed_type): Ditto.
* ada-valprint.c (char_at, printstr): Make buffer a const bfd_byte.
* gdbtypes.h (print_scalar_formatted): Make buffer a const bfd_byte.
* printcmd.c (print_scalar_formatted): Update.
* value.h (value_bit_index, print_floating)
(find_rt_vbase_offset): Make buffer a const bfd_byte.
* valprint.c (print_floating): Update.
* valarith.c (value_bit_index): Update.
* valops.c (find_rt_vbase_offset): Update.
* valprint.h (print_octal_chars, print_char_chars)
(print_hex_chars, print_decimal_chars, print_binary_chars): Make
buffer a const bfd_byte.
* valprint.c (print_binary_chars, print_octal_chars)
(print_decimal_chars, print_hex_chars, print_char_chars): Make
"valaddr"buffer a const bfd_byte, ditto for local variables
referencing that buffer.
* m2-valprint.c: Include "c-lang.h".
(c_val_print): Delete extern declaration.
* scm-valprint.c: Include "c-lang.h".
(c_val_print): Delete extern declaration.
Makefile.in: Update dependencies.
* gnu-v2-abi.h (gnuv2_baseclass_offset): Make "valaddr" a const
bfd_byte.
* cp-abi.h (baseclass_offset): Make "valaddr" a const bfd_byte.
(struct cp_abi_ops): Make baseclass_offset's "valaddr" a const
bfd_byte.
* cp-abi.c (baseclass_offset): Update.
* gnu-v2-abi.c (gnuv2_baseclass_offset): Update.
* gnu-v2-abi.h: New file.
* gnu-v2-abi.c: Include "gnu-v2-abi.h".
(gnuv2_baseclass_offset): Delete declaration.
* hpacc-abi.c: Include "gnu-v2-abi.h".
(gnuv2_baseclass_offset): Delete extern declaration.
* Makefile.in: Update dependencies.
* doublest.c (floatformat_is_negative, floatformat_is_nan)
(floatformat_mantissa, get_field): Make the buffer a const
bfd_byte, simplify.
2005-01-27 Andrew Cagney <cagney@gnu.org>
* value.h (struct value): Change type of contents to bfd_byte.
(VALUE_CONTENTS_RAW): Simplify.
* gdbarch.sh (integer_to_address): Change buf parameter to a const
bfd_byte, make pure-multi-arch.
* gdbarch.h, gdbarch.c: Regenerate.
* mips-tdep.c (mips_integer_to_address): Update.
* value.c (value_as_address): Update.
* cli/cli-dump.h (fopen_with_cleanup): Make "filename" const.
* cli/cli-dump.c (dump_binary_file, dump_bfd_file): Make string
parameters const, change buf to a const bfd_byte.
(fopen_with_cleanup, bfd_openw_with_cleanup): Make all string
parameters const.
* corefile.c (write_memory): Update, make a copy of the read-only
buffer.
* target.c (target_read_memory): Update.
(target_write_memory): Update, make a copy of the read-only
buffer.
* gdbcore.h (write_memory): Change buffer type to bfd_byte, make
const.
* target.h (target_read_memory, target_write_memory): Change
buffer type to bfd_byte; for write_memory, make it const.
* symfile-mem.c (do_target_read_memory): New function.
(symbol_file_add_from_memory): Pass do_target_read_memory to
bfd_elf_bfd_from_remote_memory.
* value.h: Indent using gdb_indent.sh.
* configure: Regenerate to track ../gettext.m4 change.
2005-01-26 Andrew Cagney <cagney@gnu.org>
* rs6000-tdep.c: Include "reggroups.h".
(rs6000_gdbarch_init): Set register_reggroup_p.
(rs6000_register_reggroup_p): New function.
2005-01-26 Orjan Friberg <orjanf@axis.com>
* cris-tdep.c (enum cris_num_regs, enum cris_regnums)
(cris_sigtramp_frame_unwind_cache, cris_register_size): Update for
CRISv32.
(crisv32_single_step_through_delay, cris_can_use_hardware_watchpoint)
(cris_region_ok_for_watchpoint, cris_stopped_data_address)
(crisv32_cannot_fetch_register, crisv32_cannot_store_register)
(crisv32_register_type, cris_special_register_name)
(crisv32_register_name): New functions.
(cris_spec_reg_applicable): Recognize more versions.
(cris_register_name): Update with call to cris_special_register_name.
(find_cris_op): Filter out CRISv32 instructions. Tweaked comment and
warning when unable to find step target.
(CRISV10_ELF_NGREG, CRISV32_ELF_NGREG, crisv32_elf_gregset_t): Define.
(supply_gregset): Add struct gdbarch_tdep. Set pseudo-PC register for
CRISv32.
(fetch_core_registers): Update for CRISv32.
(cris_gdbarch_init): Set pc_regnum, register_type, num_regs,
register_name, cannot_store_register, cannot_fetch_register,
have_nonsteppable_watchpoint, single_step_through_delay for CRISv32.
2005-01-26 Nick Roberts <nickrob@snap.net.nz>
* interps.c (interpreter_exec_cmd): Use condition,
e.reason < 0, to raise an error.
2005-01-25 Andrew Cagney <cagney@gnu.org>
* ppc-linux-tdep.c: Include "tramp-frame.h"
(struct ppc_linux_sigtramp_cache)
(ppc_linux_sigtramp_this_id, ppc_linux_sigtramp_prev_register)
(ppc_linux_sigtramp_unwind, ppc_linux_sigtramp_sniffer)
(ppc_linux_sigtramp_cache): Delete.
(ppc32_linux_sigaction_cache_init)
(ppc64_linux_sigaction_cache_init)
(ppc32_linux_sighandler_cache_init)
(ppc64_linux_sighandler_cache_init)
(ppc32_linux_sigaction_tramp_frame)
(ppc64_linux_sigaction_tramp_frame)
(ppc32_linux_sighandler_tramp_frame)
(ppc64_linux_sighandler_tramp_frame)
(ppc_linux_sigtramp_cache, ppc_linux_init_abi): Implement 32 and
64-bit, sigaction and siginfo tramp-frame unwinders.
* ppc-linux-tdep.c (ppc_linux_init_abi): Always set
long_double_bit to 8.
2005-01-24 Andrew Cagney <cagney@gnu.org>
* infrun.c (handle_inferior_event): Handle back-to-back and nested
signals where the step_resume_breakpoint may have already been
inserted.
2005-01-24 Andrew Cagney <cagney@gnu.org>
* configure: Regenerate, ../gettext.m4 was updated.
2005-01-23 Mark Kettenis <kettenis@gnu.org>
* NEWS: Mention new BSD user-level threads support.
* i386obsd-tdep.c: Update copyright year. Include
"bsd-uthread.h".
(i386obsd_uthread_reg_offset): New variable.
(I386OBSD_UTHREAD_ESP_OFFSET): New define.
(i386obsd_supply_uthread, i386obsd_collect_uthread): New
functions.
(i386obsd_init_abi): Set supply_uthread and collect_uthread.
* Makefile.in (i386obsd-tdep.o): Update dependencies.
* config/i386/obsd.mt (TDEPFILES): Add bsd-uthread.o.
2005-01-23 Christopher Faylor <cgf@timesys.com>
* win32-nat.c: Update copyright year.
(child_init_thread_list): Set thread linked list point to NULL so that
it won't be reused after clearing.
2005-01-21 Mark Kettenis <kettenis@gnu.org>
* acconfig.h (HAVE_STRUCT_REG_R_FS, HAVE_STRUCT_R_GS): Remove
undefs.
* configure.ac: Use AC_CHECK_MEMBERS to check whether `struct
thread' has a td_pcb member and whether `struct reg' has r_fs and
r_gs members.
* configure, config.in: Regenerate.
2005-01-21 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Remove ia64-*-aix* junk.
* configure: Regenerate.
* configure.ac: Use AC_CHECK_DECLS instead of gcc_AC_CHECK_DECLS
and BFD_NEED_DECLARATION. Don't check if a declaration of strdup
is necessary.
* configure, config.in: Regenerate.
* utils.c: Adjust for usage of AC_CHECK_DECLS instead of
BFD_NEED_DECLARATION. Never provide a prototype for
caninicalize_file_name.
* gdb_string.h: Adjust for usage of AC_CHECK_DECLS instead of
BFD_NEED_DECLARATION.
* configure.ac (targ_archs): Use standard autoconf check for
"struct stat.st_blocks" instead of rolling our own.
* configure: Regenerated.
* acconfig.h (HAVE_STRUCT_STAT_ST_BLOCKS): Remove undef.
* config.in: Regenerated.
2005-01-21 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Modernize checks for `long long' and `long double'
support.
* configure: Regenerated.
* acconfig.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG)
(PRINT_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE): Remove undefs.
* config.in: Regenerated.
2005-01-20 Mark Kettenis <kettenis@gnu.org>
* acconfig.h (HAVE_STRUCT_SAVE_STATE_T)
(HAVE_STRUCT_MEMBER_SS_WIDE): Remove undefs.
* configure.ac: Remove checks for HP-UX save_state structure.
* configure: Regenerated.
2005-01-19 Andrew Cagney <cagney@gnu.org>
* utils.c (quit): Simplify, call fatal.
* exceptions.c: Include "serial.h"
(print_flush): Mimic flush code found in utils.c:quit.
* Makefile.in: Update dependencies.
2005-01-19 Jim Blandy <jimb@redhat.com>
* configure.tgt: Set build_rdi_share to "yes" on those targets
that use that debugging protocol.
Set build_nlm to yes to build NLM stub for Netware targets.
* configure.ac: If build_rdi_share is "yes", then configure the
rdi-share subdirectory.
If build_nlm is "yes", the configure the "nlm" subdirectory.
* configure: Regenerated.
* rdi-share/configure, rdi-share/aclocal.m4: Regenerated using
autoconf 2.59 and automake 1.9.3.
2005-01-19 Andrew Cagney <cagney@gnu.org>
* exceptions.h (deprecated_throw_reason): Rename throw_reason.
* exceptions.c (deprecated_throw_reason): Rename throw_reason.
* utils.c (internal_verror, quit): Update.
* remote-sds.c (interrupt_query): Update.
* remote-mips.c (mips_error, mips_kill): Update.
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Update.
* remote.c (interrupt_query): Update.
* ocd.c (interrupt_query): Update.
* nto-procfs.c (interrupt_query): Update.
* monitor.c (monitor_interrupt_query): Update.
* breakpoint.c (break_command_1): Update.
* infrun.c: (resume, proceed, wait_for_inferior)
(handle_inferior_event, stop_stepping)
(prepare_to_wait): Write debug output to gdb_stdlog.
2005-01-19 Mark Kettenis <kettenis@gnu.org>
* inf-ptrace.c (inf_ptrace_prepare_to_store)
(inf_ptrace_post_startup_inferior)
(inf_ptrace_acknowledge_created_inferior)
(inf_ptrace_insert_fork_catchpoint)
(inf_ptrace_remove_fork_catchpoint)
(inf_ptrace_insert_vfork_catchpoint):
(inf_ptrace_remove_vfork_catchpoint, inf_ptrace_follow_fork)
(inf_ptrace_insert_exec_catchpoint)
(inf_ptrace_remove_exec_catchpoint): Remove functions.
(inf_ptrace_reported_exec_events_per_exec_call): Tweak comment.
(inf_ptrace_target): Don't set to_prepare_to_store,
to_post_startup_inferior, to_acknowledge_created_inferior,
to_insert_fork_ctachpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_follow_fork, to_insert_exec_catchpoint,
to_remove_exec_catchpoint.
2005-01-18 Andrew Cagney <cagney@gnu.org>
* target.h (struct target_ops): Change return type of
to_insert_fork_catchpoint, to_insert_vfork_catchpoint and
to_insert_exec_catchpoint to void.
(child_insert_fork_catchpoint, child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Change return type to void.
* target.c (update_current_target): Update.
(debug_to_insert_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Update.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_insert_vfork_catchpoint)
(inf_child_insert_exec_catchpoint): Update.
* breakpoint.c (insert_catchpoint): Update, do not throw an error.
* linux-nat.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint)
(child_insert_exec_catchpoint): Update.
* inftarg.c (child_insert_fork_catchpoint)
(child_insert_vfork_catchpoint,)
(child_insert_exec_catchpoint): Update.
* remote.c (remote_open_1): Use throw_exception.
2005-01-17 Michael Snyder <msnyder@redhat.com>
* mips-linux-tdep.c: Whitespace tweaks.
2005-01-17 Corinna Vinschen <vinschen@redhat.com>
* infcmd.c (attach_command): Call CLEAR_SOLIB if available.
2005-01-17 Andrew Cagney <cagney@gnu.org>
* top.h (source_error, source_pre_error): Delete declaration.
* cli/cli-script.c (source_error_allocated, source_error): Delete.
(script_from_file, source_cleanup_lines): Do not manipulate
source_error_allocated, error_pre_print and source_error.
(struct source_cleanup_lines_args): Delete fields old_pre_error,
and old_error_pre_print.
* top.c (source_error_allocated, source_error)
(source_pre_error): Delete.
(command_line_input): Do not set error_pre_print.
* event-top.c (command_line_handler): Do not set error_pre_print.
2005-01-16 Jason Thorpe <thorpej@netbsd.org>
* MAINTAINERS: Update my email address.
2005-01-16 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Provide prerequisite headers when checking
<term.h>.
* configure: Regenerate.
* amd64fbsd-tdep.c: Update copyright year. Include "gdb_assert.h"
and "bsd-uthread.h".
(amd64fbsd_jmp_buf_reg_offset): New variable.
(amd64fbsd_supply_uthread, amd64fbsd_collect_uthread): New
functions.
(amd64fbsd_init_abi): Set supply_uthread and collect_uthread.
* i386fbsd-tdep.c: Fix typo.
* Makefile.in (amd64fbsd-tdep.o): Update dependencies.
* config/i386/fbsd64.mt (TDEPFILES): Add bsd-uthread.o.
2005-01-16 Andrew Cagney <cagney@gnu.org>
* cli/cli-script.c: Include "exceptions.h".
(struct wrapped_read_command_file_args): Define.
(wrapped_read_command_file): New function.
(script_from_file): Replace direct call to read_command_file by
one wrapped by an exception handler.
* exceptions.c (throw_it): Free the old message after creating the
new.
* Makefile.in: Update dependencies.
2005-01-16 Mark Kettenis <kettenis@gnu.org>
* sparc64fbsd-tdep.c: Update copyright year.
(sparc64fbsd_collect_gregset, sparc64fbsd_collect_fpregset): New
functions.
(sparc64fbsd_init_abi): Create register sets with collect
functions.
* sparc64fbsd-nat.c: Include "fbsd-nat.h".
(_initialize_sparc64fbsd_nat): Add some extra features to the
generic SPARC target.
* Makefile.in (sparc64fbsd-nat.o): Update dependencies.
* config/sparc/fbsd.mh (NATDEPFILES): Add fbsd-nat.o and gcore.o.
(NAT_FILE): Set to solib.h.
* config/sparc/nm-fbsd.h: Remove file.
* sparc64-tdep.c (sparc64_store_arguments): Fix typo.
* sparc-tdep.c (sparc_integral_or_pointer_p): Simplify.
2005-01-16 Andrew Cagney <cagney@gnu.org>
* exceptions.c (struct catcher): Delete saved_error_pre_print and
saved_quit_pre_print.
(catcher_init): Delete parameter errstring, do not override the
pre_print strings.
(catcher_pop): Do not restore the pre_print strings.
(catch_exception, catch_exceptions_with_msg, catch_errors)
(catch_command_errors): Update catch_init calls.
2005-01-16 Mark Kettenis <kettenis@gnu.org>
* Makefile.in (sparc64fbsd-nat.o): Update dependencies.
* sparc64fbsd-nat.c: Update copyright year. Include "target.h".
2005-01-15 Andrew Cagney <cagney@gnu.org>
* acinclude.m4: Include ../bfd/bfd.m4 instead of
../bfd/acinclude.m4. Include ../gettext.m4.
* aclocal.m4, configure: Re-generate.
* exceptions.c (do_captured_command)
(struct captured_command_args): Delete.
(catch_command_errors): Simplify by inlining call to catch_errors.
* exceptions.c (struct catcher): Delete field print_message.
(catcher_init): Delete print_message parameter.
(catch_exception, catch_exceptions_with_msg, catch_errors): Update.
(throw_it): Delete prefix parameter.
(throw_verror, throw_vfatal, throw_error): Update.
2005-01-14 Andrew Cagney <cagney@gnu.org>
* exceptions.c (print_and_throw): Delete, replaced by throw_it.
(throw_reason): Leave the exception's message field blank.
(throw_it): New function, create the exception and throw it.
(throw_verror, throw_vfatal, throw_error): Call throw_it.
(print_any_exception): New function.
(catch_errors, catch_exceptions_with_msg): Call
print_any_exception.
(throw_exception): Move code calling annotate_error and
annotate_quit from here ...
(print_exception): ... to here.
* exceptions.c (exception_fprintf, exception_print): Move printing
of \n from here ...
(print_exception): ... to here.
(print_flush): New function.
(exception_print, exception_fprintf): Replace duplicated flush and
wrap code with call to print_flush.
(print_and_throw): Simplify, by using xstrvprintf, print_flush,
and print_exception.
(do_write): Delete.
* remote-sds.c (interrupt_query): Call throw_reason instead of
throw_exception.
* remote-mips.c (mips_error, mips_kill): Ditto
* ocd.c (interrupt_query): Ditto.
* nto-procfs.c (interrupt_query): Ditto.
* monitor.c (monitor_interrupt_query): Ditto.
2005-01-14 Jeff Johnston <jjohnstn@redhat.com>
* ia64-linux-nat.c: Include "ia64-tdep.h" to get register definitions.
2005-01-14 Andrew Cagney <cagney@gnu.org>
* exceptions.h (catch_exceptions): Delete errstring parameter.
(catch_exceptions_with_msg): Ditto.
* exceptions.c (catch_exceptions_with_msg): Update.
(catch_exceptions): Update.
* symfile-mem.c (add_vsyscall_page): Update.
* frame.c (get_current_frame): Update.
* wrapper.c (gdb_value_struct_elt): Update.
* exceptions.c (catch_exceptions): Update.
* thread.c (gdb_list_thread_ids, gdb_thread_select): Update.
* breakpoint.c (gdb_breakpoint_query, gdb_breakpoint): Update.
* remote-fileio.c (remote_fileio_request): Update.
* exceptions.h (exception_fprintf): Declare.
(exception_print): Drop pre_print parameter.
* mi/mi-main.c (mi_execute_command): Update exception_print call.
* cli/cli-interp.c (safe_execute_command): Update exception_print
call.
* remote.c (remote_open_1): Instead of passing an error prefix to
catch_exceptions, use catch_exceptions and exception_fprintf.
(remote_start_remote): Change return type to void.
* breakpoint.c (insert_bp_location): Instead of passing an error
prefix to catch_exceptions, use catch_exceptions and
exception_fprintf.
(insert_catchpoint): Change return type to void.
(break_command_1): Update exception_print call.
* exceptions.c (exception_fprintf): New function.
(print_exception): New function.
(exception_print): Use print_exception.
* utils.c (error_output_message): Delete function.
* defs.h (error_output_message): Delete declaration.
* linespec.c (symtab_from_filename, decode_variable): Use
throw_error instead of error_silent.
* breakpoint.c (do_captured_parse_breakpoint): Change return type
to void.
(break_command_1): Use catch_exception and check the error return
status.
* exceptions.c (throw_error): New function.
(throw_vsilent): Delete function.
* exceptions.h (throw_error): Declare.
(throw_vsilent): Delete declaration.
* utils.c (error_silent): Delete function.
* defs.h (error_silent): Delete declaration.
* mi/mi-main.c (mi_execute_command): Print the exception.
* cli/cli-interp.c (safe_execute_command): Print the exception.
* exceptions.h (exception_print): Declare.
* exceptions.c (struct catcher): Add field print_message.
(catcher_init): Add parameter print_message, store in the catcher
struct.
(print_and_throw): Only print the message when print_message.
(catch_exceptions_with_msg, catch_errors): Pass print_message=1 to
catcher_init.
(catch_exception): Pass print_message=0 to catcher_init.
* varobj.c (varobj_create): Add missing \n.
2005-01-13 Michael Snyder <msnyder@redhat.com>
* cli/cli-decode.h: Whitespace tweaks.
* wince.c: Whitespace tweaks.
* uw-thread.c: Whitespace tweaks.
* utils.c: Whitespace tweaks.
* tracepoint.[ch]: Whitespace tweaks.
* solist.h: Whitespace tweaks.
2005-01-13 Andrew Cagney <cagney@gnu.org>
* exceptions.h (struct exception): Make message const.
* mi/mi-main.c (mi_execute_command): Pass result.message directly
to fputstr_unfiltered.
2005-01-13 Michael Snyder <msnyder@redhat.com>
* stack.c: Whitespace tweaks.
* somsolib.[ch]: Whitespace tweaks.
* solib-aix.c: Whitespace tweaks.
* solib.c: Whitespace tweaks.
* solib-frv.c: Whitespace tweaks.
* solib.h: Whitespace tweaks.
* solib-irix.c: Whitespace tweaks.
* solib-som.c: Whitespace tweaks.
* solib-sunos.c: Whitespace tweaks.
* solib-svr4.[ch]: Whitespace tweaks.
* ser-tcp.c: Whitespace tweaks.
* ser-unix.c: Whitespace tweaks.
* serial.h: Whitespace tweaks.
* scm-valprint.c: Whitespace tweaks.
* rs6000-tdep.c: Whitespace tweaks.
* rs6000-nat.c: Whitespace tweaks.
* remote.c: Whitespace tweaks.
2005-01-13 Andrew Cagney <cagney@gnu.org>
* defs.h (error_last_message, error_init): Delete declaration.
* utils.c (fatal, vfatal): Call throw_vfatal.
(error, verror): Call throw_verror;
(do_write, error_stream_1): Delete function.
(error_stream): Simplify, call error.
(error_last_message, error_init, gdb_lasterr): Delete.
(error_silent): Simplify, call throw_vsilent.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Dup the message.
* main.c (captured_main): Delete call to error_init.
* exceptions.c (throw_verror, throw_verror)
(throw_vsilent): New functions.
(do_write, print_and_throw): New functions.
(last_message): New global.
(throw_reason): Replace error_last_message with last_message.
(catch_exceptions_with_msg): Dup the message.
* exceptions.h (throw_verror, throw_vfatal, throw_vsilent):
Declare.
2005-01-13 Michael Snyder <msnyder@redhat.com>
* remote-st.c: Whitespace tweaks.
* remote-sim.c: Whitespace tweaks.
* remote-mips.c: Whitespace tweaks.
* pa64solib.[ch]: Whitespace tweaks.
* mdebugread.c: Whitespace tweaks.
* main.c: Whitespace tweaks.
* interps.c: Whitespace tweaks.
* infrun.c: Whitespace tweaks.
* infcmd.c: Whitespace tweaks.
* hpux-thread.c: Whitespace tweaks.
* hppa-hpux-tdep.c: Whitespace tweaks.
* gdbcore.h: Whitespace tweaks.
* gdbcmd.h: Whitespace tweaks.
* gdb-events[.c, .h, .sh]: Whitespace tweaks.
* corefile.c: Whitespace tweaks.
* completer.c: Whitespace tweaks.
* coff-solib.c: Whitespace tweaks.
* coff-solib.h: Whitespace tweaks.
* cli-out.c: Whitespace tweaks.
* breakpoint.c: Whitespace tweaks.
* cli/cli-interp.c: Tweak comments, per coding standard.
2005-01-13 Andrew Cagney <cagney@gnu.org>
* breakpoint.c (gdb_breakpoint_query): Update, use
catch_exceptions_with_msg.
(do_captured_breakpoint): Add uiout parameter.
(gdb_breakpoint): Update, use catch_exceptions_with_msg.
* mi/mi-main.c (mi_cmd_thread_select): Pass mi_error_message to
gdb_thread_select. Return MI_CMD_ERROR instead of
MI_CMD_CAUGHT_ERROR.
(mi_cmd_thread_list_ids): Ditto for gdb_list_thread_ids.
(enum captured_mi_execute_command_actions): Delete
EXECUTE_COMMAND_DISPLAY_ERROR.
(captured_mi_execute_command): Delete code handling
MI_CMD_CAUGHT_ERROR.
(mi_execute_command): Don't check for
EXECUTE_COMMAND_DISPLAY_ERROR.
* mi/mi-cmd-break.c (breakpoint_notify): Update call to
gdb_breakpoint_query.
(mi_cmd_break_insert): Pass mi_error_message to gdb_breakpoint.
* mi/mi-cmds.h (enum mi_cmd_result): Delete MI_CMD_CAUGHT_ERROR.
* gdb.h (gdb_thread_select, gdb_list_thread_ids)
(gdb_breakpoint, gdb_breakpoint_query): Add error_message
parameter.
* thread.c (thread_command): Update call.
(gdb_thread_select, gdb_list_thread_ids): Update, call
catch_exceptions_with_msg.
* mi/mi-main.c (mi_execute_command): Use catch_exception,
eliminate call to error_last_message.
(captured_mi_execute_command): Change return type to void.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* exceptions.c (exception_none): New variable.
* Makefile.in: Update dependencies.
* interps.c: Include "exceptions.h".
(interpreter_exec_cmd, interp_exec): Update to return "struct
exception"
* exceptions.h (no_exception): Declare.
* tui/tui-interp.c (tui_exec): Update to return "struct exception"
* mi/mi-interp.c: Include "exceptions.h".
(mi_cmd_interpreter_exec, mi_interpreter_exec): Update to return
'struct exception".
* cli/cli-interp.c (cli_interpreter_exec, safe_execute_command)
(do_captured_execute_command): Update to use catch_exception.
* interps.h: Include "exceptions.h".
(interp_exec_ftype, interp_exec): Return "struct exception".
* exceptions.h (throw_reason): Rename throw_exception.
(enum errors, struct exception): Define.
(catch_exception_ftype): Define.
(catch_exception, throw_exception): Declare.
* exceptions.c (throw_exception): Rewrite.
(throw_reason): New function.
(struct catcher, catcher_state_machine): Replace "reason" with
"exception", delete "gdberrmsg".
(catch_exception): New function.
(catcher_init): Replace "gdberrmsg" parameter with "exception".
(catch_errors, catch_exceptions_with_msg): Re-implement passing
exception to catcher_init.
* utils.c (error_silent, error_stream_1): Use throw_reason.
(internal_verror, quit): Ditto.
* breakpoint.c (insert_catchpoint, break_command_1): Ditto.
* remote-fileio.c (remote_fileio_ctrl_c_signal_handler): Ditto.
* remote.c (remote_open_1, interrupt_query): Ditto.
2005-01-12 Mark Kettenis <kettenis@gnu.org>
* i386fbsd-tdep.c: Update copyright year. Include "gdbcore.h",
"regcache.h", "gdb_assert.h" and "bsd-uthread.h".
(i386fbsd_jmp_buf_reg_offset): New variable.
(i386fbsd_supply_uthread, i386fbsd_collect_uthread): New
functions.
(i386fbsdaout_init_abi): Set supply_uthread and collect_uthread.
* Makefile.in (i386fbsd-tdep.o): Update dependency.
* config/i386/fbsd.mt (TDEPFILES): Add bsd-uthread.o.
* bsd-uthread.h: New file.
* bsd-uthread.c: New file.
* Makefile.in (bsd_uthread_h): New variable.
(ALLDEPFILES): Add bsd-uthread.c.
(bsd-uthread.o): New dependency.
* solib.h Update copyright year.
(struct so_list): Forward declaration.
(solib_read_symbols): New prototype.
* solib.c (solib_read_symbols): New function.
(solib_add): Call solib_read_symbols to read in symbols.
(update_solib_list): Call observer_notify_solib_loaded.
* i386bsd-nat.c: Update copyright year. Don't include
<sys/param.h> and <sys/user.h>.
(register_u_addr, kernel_u_size): Remove functions.
* config/i386/obsd.mh (NAT_FILE): Remove.
* config/i386/obsdaout.mh (NAT_FILE): Set to solib.h.
* config/i386/nm-obsd.h: Remove file.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* exceptions.c: Include "gdb_string.h".
(enum catcher_state, struct catcher): Define.
(current_catcher): New global, replaces catch_return;
(catch_return): Delete.
(throw_exception): Use current_catcher->buf;
(catcher_init, catcher_pop, catcher_state_machine): New functions.
(catcher): Delete.
(struct catch_errors_args): Delete.
(do_catch_errors): Delete.
(catch_exceptions): Replace body with call to
catch_exceptions_with_msg.
(catcher): Delete.
(catch_exceptions_with_msg, catch_errors): Re-implement using
catcher_state_machine.
* exceptions.h (enum return_reason, RETURN_MASK)
(RETURN_MASK_QUIT, RETURN_MASK_ERROR, RETURN_MASK_ALL)
(return_mask, throw_exception, catch_exceptions_ftype)
(catch_exceptions_with_msg, catch_errors_ftype, catch_errors)
(catch_command_errors_ftype, catch_command_errors): Move to
exceptions.h.
* exceptions.c, exceptions.h: New files.
* top.c: Do not include <setjmp.h>.
(SIGJMP_BUF, SIGSETJMP, SIGLONGJMP, catch_return)
(throw_exception, catcher, catch_exceptions)
(catch_exceptions_with_msg, struct catch_errors_args)
(do_catch_errors, catch_errors, struct captured_command_args)
(do_captured_command, catch_command_errors): Move to exceptions.c.
* wrapper.c, wince.c, win32-nat.c, utils.c: Include "exceptions.h".
* tui/tui-interp.c, top.c, thread.c, symmisc.c: Ditto.
* symfile-mem.c, stack.c, solib.c, rs6000-nat.c: Ditto.
* remote-sds.c, remote-mips.c, remote-fileio.c: Ditto.
* remote-e7000.c, objc-lang.c, ocd.c: Ditto.
* remote.c, nto-procfs.c, monitor.c, mi/mi-main.c: Ditto.
* main.c, m32r-rom.c, infrun.c, inf-loop.c: Ditto.
* hppa-hpux-tdep.c, frame.c, event-top.c, event-loop.c: Ditto.
* corelow.c, corefile.c, cli/cli-interp.c, breakpoint.c: Ditto.
* ada-valprint.c, ada-lang.c: Ditto.
* Makefile.in (HFILES_NO_SRCDIR, COMMON_OBS): Add exceptions.h and
exceptions.o. Update all dependencies.
2005-01-11 Mark Kettenis <kettenis@gnu.org>
* config/i386/nm-fbsd.h: Update copyright year.
Don't include "config/nm-bsd.h".
(KERNEL_U_SIZE): Remove macro.
(kernel_u_size): Remove prototype.
* config/vax/nbsdaout.mh (NAT_FILE): Remove.
* config/vax/nm-nbsdaout.h: Remove file.
2005-01-10 Elena Zannoni <ezannoni@redhat.com>
* MAINTAINERS: Remove self from sh/sh64 maintainership.
2005-01-10 Andrew Cagney <cagney@gnu.org>
* MAINTAINERS: List Andrew Cagney and Kevin Buettner as can commit
changes to PowerPC, and Andrew Cagney as lead PowerPC GNU/Linux
maintainer.
* MAINTAINERS: Hans-Peter Nilsson and Orjan Friberg can commit
changes to CRIS.
* MAINTAINERS: Remove "Maintenance Only". Spell out that CAN
COMMIT means can approve).
2005-01-10 Mark Kettenis <kettenis@gnu.org>
* vax-nat.c: Update copyright year. Include "inf-ptrace.h".
(vax_register_u_offset): Make statuc.
(_initialize_vax_nat): Construct and add target vector.
* config/vax/vax.mh (NATDEPFILES): Remove infptrace.o and
inftarg.o. Add inf-ptrace.o.
* Makefile.in (vax-nat.o): Update dependencies.
* inf-ptrace.h: Update copyright year. Sync comment with
inf-ptrace.c.
(inf_ptrace_trad_target): New prototype.
* inf-ptrace.c: Update copyright year. Include "regcache.h" and
"gdb_assert.h"
(inf_ptrace_target): Add comment.
(inf_ptrace+register_u_offset): New variable.
(inf_ptrace_fetch_register, inf_ptrace_fetch_registers)
(inf_ptrace_store_register, inf_ptrace_store_registers)
(inf_ptrace_trad_target): New functions.
* Makefile.in (inf-ptrace.o): Update dependencies.
2005-01-09 Mark Kettenis <kettenis@gnu.org>
* configure.ac: Provide prerequisite headers when checking
<link.h>, <sys/proc.h> and <sys/user.h>.
* configure: Regenerate.
2005-01-08 Mark Kettenis <kettenis@gnu.org>
* config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Set to
tm-ppc-eabi.h instead of the removed tm-nbsd.h.
2005-01-07 Mark Kettenis <kettenis@gnu.org>
* config/ia64/tm-linux.h: Tweak comment. Update copyright year.
Don't include "tm-ia64.h".
* config/ia64/ia64.mt (DEPRECATED_TM_FILE): Remove.
* config/ia64/tm-ia64.h: Remove. Move contents ...
* ia64-tdep.h: ... here. Update copyright year.
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
* configure: Re-generate.
* configure.tgt: Disable arm*-*-*, thumb*-*-*, strongarm*-*-*,
xscale-*-* and i[34567]86-*-netware* code adding rdi-share or nlm
to configdirs.
* configure.in: Replace configdirs with multiple references to
AC_CONFIG_SUBDIRS.
* configure: Re-generate.
2005-01-05 Andreas Schwab <schwab@suse.de>
* ia64-tdep.c: Include "osabi.h".
(native_find_global_pointer): Delete.
(ia64_find_global_pointer): Renamed from
generic_elf_find_global_pointer.
(FIND_GLOBAL_POINTER): Delete. Change all users to call
ia64_find_global_pointer instead.
(ia64_gdbarch_init): Call gdbarch_init_osabi. Remove references
to ia64_linux_sigcontext_register_address and
ia64_linux_write_pc. Don't set tdep->find_global_pointer.
(_initialize_ia64_tdep): Call gdbarch_register instead of
deprecated register_gdbarch_init.
(struct gdbarch_tdep): Remove find_global_pointer field and move
to ...
* ia64-tdep.h (struct gdbarch_tdep): ... here.
(ia64_linux_sigcontext_register_address): Remove declaration.
(ia64_linux_getunwind_table): Likewise.
(ia64_linux_write_pc): Likewise.
* ia64-linux-tdep.c: Include "osabi.h".
(ia64_linux_sigcontext_register_address): Make static.
(ia64_linux_write_pc): Likewise.
(ia64_linux_init_abi): New.
(_initialize_ia64_linux_tdep): New.
* Makefile.in (ia64-tdep.o, ia64-linux-tdep.o): Depend on
$(osabi_h).
2005-01-05 Kevin Buettner <kevinb@redhat.com>
* ia64-tdep.c (ia64_gdbarch_init): Eliminate dependency on
functions in ia64-aix-tdep.c.
* ia64-tdep.h (ia64_aix_sigcontext_register_address): Remove
function defined in ia64-aix-tdep.c.
* ia64-aix-tdep.c: Remove file.
* config/ia64/linux.mt (TDEPFILES): Remove ia64-aix-tdep.o from
this list.
* Makefile.in (ia64-aix-tdep.o): Delete.
2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr>
Committed by Andrew Cagney.
* ada-valprint.c, aix-thread.c, alpha-nat.c: I18n markup.
* alphabsd-nat.c, alphanbsd-tdep.c, amd64-linux-nat.c: I18n markup.
* amd64-tdep.c, amd64bsd-nat.c, amd64fbsd-nat.c: I18n markup.
* arch-utils.c, arm-linux-nat.c, arm-tdep.c: I18n markup.
* armnbsd-nat.c, armnbsd-tdep.c, auxv.c, avr-tdep.c: I18n markup.
* aix-thread.c (_initialize_aix_thread): Get rid of the
deprecated_add_show_from_set call.
* alpha-tdep.c (_initialize_alpha_tdep): Ditto.
* arm-tdep.c (_initialize_arm_tdep): Ditto.
* command.h (add_setshow_enum_cmd): Add arguments for returning
new list elements.
* cli/cli-decode.c (add_setshow_enum_cmd): Ditto.
* mips-tdep.c (_initialize_mips_tdep): Modify calls to
add_setshow_enum_cmd.
2005-01-04 Mark Kettenis <kettenis@gnu.org>
* configure.host (ia64-*-aix*): Remove.
* configure.tgt (ia64-*-aix*): Remove.
* config/ia64/aix.mh: Remove file.
* config/ia64/aix.mt: Remove file.
* config/ia64/tm-aix.h: Remove file.
* ia64-aix-nat.c: Remove file.
* Makefile.in (ia64-aix-nat.o): Remove dependency.
* config/m88k/obsd.mh (NATDEPFILES): Really remove inf-child.o.
Add back inf-ptrace.o.
2005-01-04 Andrew Cagney <cagney@gnu.org>
* version.in: Change format from 6.3.50_2005-01-04-cvs to
6.3.50.20050104-cvs.
2005-01-04 Andreas Schwab <schwab@suse.de>
* breakpoint.c (break_command_1): Always free err_msg before
returning when an exception was caught.
2005-01-01 Joel Brobecker <brobecker@gnat.com>
* hppa-tdep.c (prologue_inst_adjust_sp): Fix small confusion
in register number for addil instruction.
For older changes see ChangeLog-2004.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: