old-cross-binutils/gdb/testsuite/gdb.base/foll-exec.exp

#   Copyright 1997, 1999 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

if $tracelevel then {
	strace $tracelevel
	}

if { ![isnative] } then {
    continue
}

set prms_id 0
set bug_id 0

set testfile "foll-exec"
set testfile2 "execd-prog"
set srcfile ${testfile}.c
set srcfile2 ${testfile2}.c
set binfile ${objdir}/${subdir}/${testfile}
set binfile2 ${objdir}/${subdir}/${testfile2}

# build the first test case
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
     untested foll-exec.exp
     return -1
}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
     untested foll-exec.exp
     return -1
}


# Until "catch exec" is implemented on other targets...
#
if ![istarget "hppa*-hp-hpux*"] then {
    continue
}

proc zap_session {} {
   global gdb_prompt
   global binfile

   send_gdb "kill\n"
   gdb_expect {
     -re ".*Kill the program being debugged.*y or n. $" {
       send_gdb "y\n"
       send_gdb "file $binfile\n"
       gdb_expect {
         -re ".*Load new symbol table from.*y or n. $" {
           send_gdb "y\n"
           gdb_expect {
             -re "Reading symbols from.*$gdb_prompt $" {}
             timeout { fail "loading symbols (timeout)"; return }
           }
         }
         -re ".*gdb_prompt $" {}
         timeout { fail "loading symbols (timeout)"; return }
       }
    }
    -re ".*$gdb_prompt $" {}
    timeout { fail "killing inferior (timeout)" ; return }
   }
}

proc do_exec_tests {} {
   global gdb_prompt
   global binfile
   global srcfile
   global srcfile2
   global testfile
   global testfile2

   # Start the program running, and stop at main.
   #
   if ![runto_main] then {
     perror "Couldn't run ${testfile}"
     return
   }

   # Verify that we can see various global and local variables
   # in this program, and that they have expected values.  Some
   # of these variables are also declared in the program we'll
   # exec in a moment.
   #
   send_gdb "next 3\n"
   gdb_expect {
     -re "20.*execlp.*$gdb_prompt $"\
                     {pass "step to exec call"}
     -re "$gdb_prompt $" {fail "step to exec call"}
     timeout         {fail "(timeout) step to exec call"}
   }
   send_gdb "print global_i\n"
   gdb_expect {
     -re ".* = 100.*$gdb_prompt $"\
                     {pass "print follow-exec/global_i"}
     -re "$gdb_prompt $" {fail "print follow-exec/global_i"}
     timeout         {fail "(timeout) print follow-exec/global_i"}
   }
   send_gdb "print local_j\n"
   gdb_expect {
     -re ".* = 101.*$gdb_prompt $"\
                     {pass "print follow-exec/local_j"}
     -re "$gdb_prompt $" {fail "print follow-exec/local_j"}
     timeout         {fail "(timeout) print follow-exec/local_j"}
   }
   send_gdb "print local_k\n"
   gdb_expect {
     -re ".* = 102.*$gdb_prompt $"\
                     {pass "print follow-exec/local_k"}
     -re "$gdb_prompt $" {fail "print follow-exec/local_k"}
     timeout         {fail "(timeout) print follow-exec/local_k"}
   }

   # Try stepping through an execlp call, without catching it.
   # We should stop in execd-program, at its first statement.
   #
   send_gdb "next\n"
   gdb_expect {
     -re "Executing new program: .*${testfile2}.*${srcfile2}:23.*int  local_j = argc;.*$gdb_prompt $"\
                     {pass "step through execlp call"}
     -re "$gdb_prompt $" {fail "step through execlp call"}
     timeout         {fail "(timeout) step through execlp call"}
   }

   # Verify that we can see the variables defined in the newly-exec'd
   # program, and CANNOT see those defined in the exec'ing program.
   #
   send_gdb "next\n"
   gdb_expect {
     -re "26.*printf.*$gdb_prompt $"\
                     {pass "step after execlp call"}
     -re "$gdb_prompt $" {fail "step after execlp call"}
     timeout         {fail "(timeout) step after execlp call"}
   }
   send_gdb "print global_i\n"
   gdb_expect {
     -re ".* = 0.*$gdb_prompt $"\
                     {pass "print execd-program/global_i (after execlp)"}
     -re "$gdb_prompt $" {fail "print execd-program/global_i (after execlp)"}
     timeout         {fail "(timeout) print execd-program/global_i (after execlp)"}
   }
   send_gdb "print local_j\n"
   gdb_expect {
     -re ".* = 2.*$gdb_prompt $"\
                     {pass "print execd-program/local_j (after execlp)"}
     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execlp)"}
     timeout         {fail "(timeout) print execd-program/local_j (after execlp)"}
   }
   send_gdb "print local_k\n"
   gdb_expect {
     -re "No symbol \"local_k\" in current context.*$gdb_prompt $"\
                     {pass "print follow-exec/local_k (after execlp)"}
     -re "$gdb_prompt $" {fail "print follow-exec/local_k (after execlp)"}
     timeout         {fail "(timeout) print follow-exec/local_k (after execlp)"}
   }

   # Explicitly kill this program, or a subsequent rerun actually runs
   # the exec'd program, not the original program...
   zap_session

   # Start the program running, and stop at main.
   #
   if ![runto_main] then {
     perror "Couldn't run ${testfile} (2nd try)"
     return
   }

   # Verify that we can catch an exec event, and then continue
   # to follow through the exec.  (Since there's a breakpoint on
   # "main", it'll also be transferred to the exec'd program,
   # and we expect to stop there.)
   #
   send_gdb "catch exec\n"
   gdb_expect {
     -re "Catchpoint .*(exec).*$gdb_prompt $"\
                     {pass "set catch exec"}
     -re "$gdb_prompt $" {fail "set catch exec"}
     timeout         {fail "(timeout) set catch exec"}
   }

   # Verify that the catchpoint is mentioned in an "info breakpoints",
   # and further that the catchpoint mentions no program name.
   #
   send_gdb "info breakpoints\n"
   gdb_expect {
     -re ".*catch exec.*keep y.*$gdb_prompt $"\
                     {pass "info shows catchpoint without exec pathname"}
     -re ".*catch exec.*program \"\".*$gdb_prompt $"\
                     {fail "info shows catchpoint without exec pathname"}
     -re "$gdb_prompt $" {fail "info shows catchpoint without exec pathname"}
     timeout         {fail "(timeout) info shows catchpoint without exec pathname"}
   }

   # DTS CLLbs16760
   # PA64 doesn't know about $START$ in dld.sl at this point.  It should.
   # - Michael Coulter
   setup_xfail hppa2.0w-hp-hpux* CLLbs16760
   send_gdb "continue\n"
   gdb_expect {
     -re ".*Executing new program:.*${testfile2}.*Catchpoint .*(exec\'d .*${testfile2}).*in .START..*$gdb_prompt $"\
                     {pass "hit catch exec"}
     -re "$gdb_prompt $" {fail "hit catch exec"}
     timeout         {fail "(timeout) hit catch exec"}
   }

   # DTS CLLbs16760
   # test gets out of sync if previous test fails.
   gdb_test "bt" ".*" "sync up after possible failure 1"
   gdb_test "bt" "#0.*" "sync up after possible failure 2"

   # Verify that the catchpoint is mentioned in an "info breakpoints",
   # and further that the catchpoint managed to capture the exec'd
   # program's name.
   #
   send_gdb "info breakpoints\n"
   gdb_expect {
     -re ".*catch exec .*program \".*${testfile2}\".*$gdb_prompt $"\
                     {pass "info shows catchpoint exec pathname"}
     -re "$gdb_prompt $" {fail "info shows catchpoint exec pathname"}
     timeout         {fail "(timeout) info shows catchpoint exec pathname"}
   }

   # Verify that we can continue from the catchpoint, and land in the
   # main of the newly-exec'd program.
   #
   send_gdb "continue\n"
   gdb_expect {
     -re ".*${srcfile2}:23.*$gdb_prompt $"\
                     {pass "continue after hit catch exec"}
     -re "$gdb_prompt $" {fail "continue after hit catch exec"}
     timeout         {fail "(timeout) continue after hit catch exec"}
   }

   # Explicitly kill this program, or a subsequent rerun actually runs
   # the exec'd program, not the original program...
   zap_session

   # Start the program running, and stop at main.
   #
   if ![runto_main] then {
     perror "Couldn't run ${testfile} (3rd try)"
     return
   }

   # Verify that we can follow through follow an execl()
   # call.  (We must jump around earlier exec* calls.)
   #
   send_gdb "tbreak 27\n"
   gdb_expect {
     -re "Breakpoint .*file .*${srcfile}, line 27.*$gdb_prompt $"\
                     {pass "prepare to jump to execl call"}
     -re "$gdb_prompt $" {fail "prepare to jump to execl call"}
     timeout         {fail "(timeout) prepare to jump to execl call"}
   }
   send_gdb "jump 27\n"
   gdb_expect {
     -re "main.* at .*${srcfile}:27.*$gdb_prompt $"\
                     {pass "jump to execl call"}
     -re "$gdb_prompt $" {fail "jump to execl call"}
     timeout         {fail "(timeout) jump to execl call"}
   }
   # Note that stepping through an exec call causes the step-count
   # to be reset to zero.  I.e.: you may specify "next 2" at the
   # call, but you'll actually stop at the first breakpoint set in
   # the newly-exec'd program, not after the remaining step-count
   # reaches zero.
   #
   send_gdb "next 2\n"
   gdb_expect {
     -re "Executing new program: .*${testfile2}.*${srcfile2}:23.*int  local_j = argc;.*$gdb_prompt $"\
                     {pass "step through execl call"}
     -re "$gdb_prompt $" {fail "step through execl call"}
     timeout         {fail "(timeout) step through execl call"}
   }
   send_gdb "next\n"
   gdb_expect {
     -re "26.*printf.*$gdb_prompt $"\
                     {pass "step after execl call"}
     -re "$gdb_prompt $" {fail "step after execl call"}
     timeout         {fail "(timeout) step after execl call"}
   }

   # Verify that we can print a local variable (which happens to be
   # assigned the value of main's argc).
   #
   send_gdb "print local_j\n"
   gdb_expect {
     -re ".* = 3.*$gdb_prompt $"\
                     {pass "print execd-program/local_j (after execl)"}
     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execl)"}
     timeout         {fail "(timeout) print execd-program/local_j (after execl)"}
   }

   # Explicitly kill this program, or a subsequent rerun actually runs
   # the exec'd program, not the original program...
   zap_session

   # Start the program running, and stop at main.
   #
   if ![runto_main] then {
     perror "Couldn't run ${testfile} (4th try)"
     return
   }

   # Verify that we can follow through follow an execv()
   # call.  (We must jump around earlier exec* calls.)
   #
   send_gdb "tbreak 41\n"
   gdb_expect {
     -re "Breakpoint .*file .*${srcfile}, line 41.*$gdb_prompt $"\
                     {pass "prepare to jump to execv call"}
     -re "$gdb_prompt $" {fail "prepare to jump to execv call"}
     timeout         {fail "(timeout) prepare to jump to execv call"}
   }
   send_gdb "jump 41\n"
   gdb_expect {
     -re "main.* at .*${srcfile}:41.*$gdb_prompt $"\
                     {pass "jump to execv call"}
     -re "$gdb_prompt $" {fail "jump to execv call"}
     timeout         {fail "(timeout) jump to execv call"}
   }
   send_gdb "next\n"
   gdb_expect {
     -re "Executing new program: .*${testfile2}.*${srcfile2}:23.*int  local_j = argc;.*$gdb_prompt $"\
                     {pass "step through execv call"}
     -re "$gdb_prompt $" {fail "step through execv call"}
     timeout         {fail "(timeout) step through execv call"}
   }
   send_gdb "next\n"
   gdb_expect {
     -re "26.*printf.*$gdb_prompt $"\
                     {pass "step after execv call"}
     -re "$gdb_prompt $" {fail "step after execv call"}
     timeout         {fail "(timeout) step after execv call"}
   }

   # Verify that we can print a local variable (which happens to be
   # assigned the value of main's argc).
   #
   send_gdb "print local_j\n"
   gdb_expect {
     -re ".* = 2.*$gdb_prompt $"\
                     {pass "print execd-program/local_j (after execv)"}
     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execv)"}
     timeout         {fail "(timeout) print execd-program/local_j (after execv)"}
   }

   # Explicitly kill this program, or a subsequent rerun actually runs
   # the exec'd program, not the original program...
   zap_session

   # Start the program running, and stop at main.
   #
   if ![runto_main] then {
     perror "Couldn't run ${testfile} (5th try)"
     return
   }

   # Verify that we can just continue and thereby follow through an
   # exec call.  (Since the breakpoint on "main" is reset, we should
   # just stop in main of the newly-exec'd program.)
   #
   send_gdb "continue\n"
   gdb_expect {
     -re "Executing new program: .*${testfile2}.*${srcfile2}:23.*int  local_j = argc;.*$gdb_prompt $"\
                     {pass "continue through exec"}
     -re "$gdb_prompt $" {fail "continue through exec"}
     timeout         {fail "(timeout) continue through exec"}
   }
}

# Start with a fresh gdb

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}


# This is a test of gdb's ability to follow a process through a
# Unix exec() system call.
#
do_exec_tests

return 0