darkkirb/old-cross-binutils
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
old-cross-binutils/gdb/infrun.c
Pedro Alves b3444185bd gdb/ 
2009-05-28  Pedro Alves  <pedro@codesourcery.com>

	* infrun.c (handle_inferior_event): When thread hoping, switch
	inferior_ptid to the event thread before removing breakpoints from
	the target.  If not stopping, also try to revert back to a thread
	that was doing a "next".  Check if that thread still exists before
	resuming.
	(currently_stepping_thread): Delete and merge with ...
	(currently_stepping): ... this.
	(currently_stepping_callback): Rename to ...
	(currently_stepping_or_nexting_callback): ... this, and also
	return true if the thread was stepping over a call (has a
	step-resume breakpoint).

gdb/testsuite/
2009-05-28  Pedro Alves  <pedro@codesourcery.com>

	* gdb.threads/threxit-hop-specific.c: New.
	* gdb.threads/threxit-hop-specific.exp: New.
	* gdb.threads/thread-execl.c: New.
	* gdb.threads/thread-execl.exp: New.
2009-05-28 17:19:58 +00:00

5790 lines
188 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Target-struct-independent code to start (run) and stop an inferior
process.
Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
2008, 2009 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdb_string.h"
#include <ctype.h>
#include "symtab.h"
#include "frame.h"
#include "inferior.h"
#include "exceptions.h"
#include "breakpoint.h"
#include "gdb_wait.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "cli/cli-script.h"
#include "target.h"
#include "gdbthread.h"
#include "annotate.h"
#include "symfile.h"
#include "top.h"
#include <signal.h>
#include "inf-loop.h"
#include "regcache.h"
#include "value.h"
#include "observer.h"
#include "language.h"
#include "solib.h"
#include "main.h"
#include "gdb_assert.h"
#include "mi/mi-common.h"
#include "event-top.h"
#include "record.h"
/* Prototypes for local functions */
static void signals_info (char *, int);
static void handle_command (char *, int);
static void sig_print_info (enum target_signal);
static void sig_print_header (void);
static void resume_cleanups (void *);
static int hook_stop_stub (void *);
static int restore_selected_frame (void *);
static void build_infrun (void);
static int follow_fork (void);
static void set_schedlock_func (char *args, int from_tty,
struct cmd_list_element *c);
static int currently_stepping (struct thread_info *tp);
static int currently_stepping_or_nexting_callback (struct thread_info *tp,
void *data);
static void xdb_handle_command (char *args, int from_tty);
static int prepare_to_proceed (int);
void _initialize_infrun (void);
void nullify_last_target_wait_ptid (void);
/* When set, stop the 'step' command if we enter a function which has
no line number information. The normal behavior is that we step
over such function. */
int step_stop_if_no_debug = 0;
static void
show_step_stop_if_no_debug (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Mode of the step operation is %s.\n"), value);
}
/* In asynchronous mode, but simulating synchronous execution. */
int sync_execution = 0;
/* wait_for_inferior and normal_stop use this to notify the user
when the inferior stopped in a different thread than it had been
running in. */
static ptid_t previous_inferior_ptid;
int debug_displaced = 0;
static void
show_debug_displaced (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Displace stepping debugging is %s.\n"), value);
}
static int debug_infrun = 0;
static void
show_debug_infrun (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Inferior debugging is %s.\n"), value);
}
/* If the program uses ELF-style shared libraries, then calls to
functions in shared libraries go through stubs, which live in a
table called the PLT (Procedure Linkage Table). The first time the
function is called, the stub sends control to the dynamic linker,
which looks up the function's real address, patches the stub so
that future calls will go directly to the function, and then passes
control to the function.
If we are stepping at the source level, we don't want to see any of
this --- we just want to skip over the stub and the dynamic linker.
The simple approach is to single-step until control leaves the
dynamic linker.
However, on some systems (e.g., Red Hat's 5.2 distribution) the
dynamic linker calls functions in the shared C library, so you
can't tell from the PC alone whether the dynamic linker is still
running. In this case, we use a step-resume breakpoint to get us
past the dynamic linker, as if we were using "next" to step over a
function call.
in_solib_dynsym_resolve_code() says whether we're in the dynamic
linker code or not. Normally, this means we single-step. However,
if SKIP_SOLIB_RESOLVER then returns non-zero, then its value is an
address where we can place a step-resume breakpoint to get past the
linker's symbol resolution function.
in_solib_dynsym_resolve_code() can generally be implemented in a
pretty portable way, by comparing the PC against the address ranges
of the dynamic linker's sections.
SKIP_SOLIB_RESOLVER is generally going to be system-specific, since
it depends on internal details of the dynamic linker. It's usually
not too hard to figure out where to put a breakpoint, but it
certainly isn't portable. SKIP_SOLIB_RESOLVER should do plenty of
sanity checking. If it can't figure things out, returning zero and
getting the (possibly confusing) stepping behavior is better than
signalling an error, which will obscure the change in the
inferior's state. */
/* This function returns TRUE if pc is the address of an instruction
that lies within the dynamic linker (such as the event hook, or the
dld itself).
This function must be used only when a dynamic linker event has
been caught, and the inferior is being stepped out of the hook, or
undefined results are guaranteed. */
#ifndef SOLIB_IN_DYNAMIC_LINKER
#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
#endif
/* Convert the #defines into values. This is temporary until wfi control
flow is completely sorted out. */
#ifndef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 0
#else
#undef CANNOT_STEP_HW_WATCHPOINTS
#define CANNOT_STEP_HW_WATCHPOINTS 1
#endif
/* Tables of how to react to signals; the user sets them. */
static unsigned char *signal_stop;
static unsigned char *signal_print;
static unsigned char *signal_program;
#define SET_SIGS(nsigs,sigs,flags) \
do { \
int signum = (nsigs); \
while (signum-- > 0) \
if ((sigs)[signum]) \
(flags)[signum] = 1; \
} while (0)
#define UNSET_SIGS(nsigs,sigs,flags) \
do { \
int signum = (nsigs); \
while (signum-- > 0) \
if ((sigs)[signum]) \
(flags)[signum] = 0; \
} while (0)
/* Value to pass to target_resume() to cause all threads to resume */
#define RESUME_ALL (pid_to_ptid (-1))
/* Command list pointer for the "stop" placeholder. */
static struct cmd_list_element *stop_command;
/* Function inferior was in as of last step command. */
static struct symbol *step_start_function;
/* Nonzero if we want to give control to the user when we're notified
of shared library events by the dynamic linker. */
static int stop_on_solib_events;
static void
show_stop_on_solib_events (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Stopping for shared library events is %s.\n"),
value);
}
/* Nonzero means expecting a trace trap
and should stop the inferior and return silently when it happens. */
int stop_after_trap;
/* Save register contents here when executing a "finish" command or are
about to pop a stack dummy frame, if-and-only-if proceed_to_finish is set.
Thus this contains the return value from the called function (assuming
values are returned in a register). */
struct regcache *stop_registers;
/* Nonzero after stop if current stack frame should be printed. */
static int stop_print_frame;
/* This is a cached copy of the pid/waitstatus of the last event
returned by target_wait()/deprecated_target_wait_hook(). This
information is returned by get_last_target_status(). */
static ptid_t target_last_wait_ptid;
static struct target_waitstatus target_last_waitstatus;
static void context_switch (ptid_t ptid);
void init_thread_stepping_state (struct thread_info *tss);
void init_infwait_state (void);
static const char follow_fork_mode_child[] = "child";
static const char follow_fork_mode_parent[] = "parent";
static const char *follow_fork_mode_kind_names[] = {
follow_fork_mode_child,
follow_fork_mode_parent,
NULL
};
static const char *follow_fork_mode_string = follow_fork_mode_parent;
static void
show_follow_fork_mode_string (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("\
Debugger response to a program call of fork or vfork is \"%s\".\n"),
value);
}
/* Tell the target to follow the fork we're stopped at. Returns true
if the inferior should be resumed; false, if the target for some
reason decided it's best not to resume. */
static int
follow_fork (void)
{
int follow_child = (follow_fork_mode_string == follow_fork_mode_child);
int should_resume = 1;
struct thread_info *tp;
/* Copy user stepping state to the new inferior thread. FIXME: the
followed fork child thread should have a copy of most of the
parent thread structure's run control related fields, not just these.
Initialized to avoid "may be used uninitialized" warnings from gcc. */
struct breakpoint *step_resume_breakpoint = NULL;
CORE_ADDR step_range_start = 0;
CORE_ADDR step_range_end = 0;
struct frame_id step_frame_id = { 0 };
if (!non_stop)
{
ptid_t wait_ptid;
struct target_waitstatus wait_status;
/* Get the last target status returned by target_wait(). */
get_last_target_status (&wait_ptid, &wait_status);
/* If not stopped at a fork event, then there's nothing else to
do. */
if (wait_status.kind != TARGET_WAITKIND_FORKED
&& wait_status.kind != TARGET_WAITKIND_VFORKED)
return 1;
/* Check if we switched over from WAIT_PTID, since the event was
reported. */
if (!ptid_equal (wait_ptid, minus_one_ptid)
&& !ptid_equal (inferior_ptid, wait_ptid))
{
/* We did. Switch back to WAIT_PTID thread, to tell the
target to follow it (in either direction). We'll
afterwards refuse to resume, and inform the user what
happened. */
switch_to_thread (wait_ptid);
should_resume = 0;
}
}
tp = inferior_thread ();
/* If there were any forks/vforks that were caught and are now to be
followed, then do so now. */
switch (tp->pending_follow.kind)
{
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
{
ptid_t parent, child;
/* If the user did a next/step, etc, over a fork call,
preserve the stepping state in the fork child. */
if (follow_child && should_resume)
{
step_resume_breakpoint
= clone_momentary_breakpoint (tp->step_resume_breakpoint);
step_range_start = tp->step_range_start;
step_range_end = tp->step_range_end;
step_frame_id = tp->step_frame_id;
/* For now, delete the parent's sr breakpoint, otherwise,
parent/child sr breakpoints are considered duplicates,
and the child version will not be installed. Remove
this when the breakpoints module becomes aware of
inferiors and address spaces. */
delete_step_resume_breakpoint (tp);
tp->step_range_start = 0;
tp->step_range_end = 0;
tp->step_frame_id = null_frame_id;
}
parent = inferior_ptid;
child = tp->pending_follow.value.related_pid;
/* Tell the target to do whatever is necessary to follow
either parent or child. */
if (target_follow_fork (follow_child))
{
/* Target refused to follow, or there's some other reason
we shouldn't resume. */
should_resume = 0;
}
else
{
/* This pending follow fork event is now handled, one way
or another. The previous selected thread may be gone
from the lists by now, but if it is still around, need
to clear the pending follow request. */
tp = find_thread_ptid (parent);
if (tp)
tp->pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
/* This makes sure we don't try to apply the "Switched
over from WAIT_PID" logic above. */
nullify_last_target_wait_ptid ();
/* If we followed the child, switch to it... */
if (follow_child)
{
switch_to_thread (child);
/* ... and preserve the stepping state, in case the
user was stepping over the fork call. */
if (should_resume)
{
tp = inferior_thread ();
tp->step_resume_breakpoint = step_resume_breakpoint;
tp->step_range_start = step_range_start;
tp->step_range_end = step_range_end;
tp->step_frame_id = step_frame_id;
}
else
{
/* If we get here, it was because we're trying to
resume from a fork catchpoint, but, the user
has switched threads away from the thread that
forked. In that case, the resume command
issued is most likely not applicable to the
child, so just warn, and refuse to resume. */
warning (_("\
Not resuming: switched threads before following fork child.\n"));
}
/* Reset breakpoints in the child as appropriate. */
follow_inferior_reset_breakpoints ();
}
else
switch_to_thread (parent);
}
}
break;
case TARGET_WAITKIND_SPURIOUS:
/* Nothing to follow. */
break;
default:
internal_error (__FILE__, __LINE__,
"Unexpected pending_follow.kind %d\n",
tp->pending_follow.kind);
break;
}
return should_resume;
}
void
follow_inferior_reset_breakpoints (void)
{
struct thread_info *tp = inferior_thread ();
/* Was there a step_resume breakpoint? (There was if the user
did a "next" at the fork() call.) If so, explicitly reset its
thread number.
step_resumes are a form of bp that are made to be per-thread.
Since we created the step_resume bp when the parent process
was being debugged, and now are switching to the child process,
from the breakpoint package's viewpoint, that's a switch of
"threads". We must update the bp's notion of which thread
it is for, or it'll be ignored when it triggers. */
if (tp->step_resume_breakpoint)
breakpoint_re_set_thread (tp->step_resume_breakpoint);
/* Reinsert all breakpoints in the child. The user may have set
breakpoints after catching the fork, in which case those
were never set in the child, but only in the parent. This makes
sure the inserted breakpoints match the breakpoint list. */
breakpoint_re_set ();
insert_breakpoints ();
}
/* EXECD_PATHNAME is assumed to be non-NULL. */
static void
follow_exec (ptid_t pid, char *execd_pathname)
{
struct target_ops *tgt;
struct thread_info *th = inferior_thread ();
/* This is an exec event that we actually wish to pay attention to.
Refresh our symbol table to the newly exec'd program, remove any
momentary bp's, etc.
If there are breakpoints, they aren't really inserted now,
since the exec() transformed our inferior into a fresh set
of instructions.
We want to preserve symbolic breakpoints on the list, since
we have hopes that they can be reset after the new a.out's
symbol table is read.
However, any "raw" breakpoints must be removed from the list
(e.g., the solib bp's), since their address is probably invalid
now.
And, we DON'T want to call delete_breakpoints() here, since
that may write the bp's "shadow contents" (the instruction
value that was overwritten witha TRAP instruction). Since
we now have a new a.out, those shadow contents aren't valid. */
update_breakpoints_after_exec ();
/* If there was one, it's gone now. We cannot truly step-to-next
statement through an exec(). */
th->step_resume_breakpoint = NULL;
th->step_range_start = 0;
th->step_range_end = 0;
/* The target reports the exec event to the main thread, even if
some other thread does the exec, and even if the main thread was
already stopped --- if debugging in non-stop mode, it's possible
the user had the main thread held stopped in the previous image
--- release it now. This is the same behavior as step-over-exec
with scheduler-locking on in all-stop mode. */
th->stop_requested = 0;
/* What is this a.out's name? */
printf_unfiltered (_("Executing new program: %s\n"), execd_pathname);
/* We've followed the inferior through an exec. Therefore, the
inferior has essentially been killed & reborn. */
gdb_flush (gdb_stdout);
breakpoint_init_inferior (inf_execd);
if (gdb_sysroot && *gdb_sysroot)
{
char *name = alloca (strlen (gdb_sysroot)
+ strlen (execd_pathname)
+ 1);
strcpy (name, gdb_sysroot);
strcat (name, execd_pathname);
execd_pathname = name;
}
/* That a.out is now the one to use. */
exec_file_attach (execd_pathname, 0);
/* Reset the shared library package. This ensures that we get a
shlib event when the child reaches "_start", at which point the
dld will have had a chance to initialize the child. */
/* Also, loading a symbol file below may trigger symbol lookups, and
we don't want those to be satisfied by the libraries of the
previous incarnation of this process. */
no_shared_libraries (NULL, 0);
/* Load the main file's symbols. */
symbol_file_add_main (execd_pathname, 0);
#ifdef SOLIB_CREATE_INFERIOR_HOOK
SOLIB_CREATE_INFERIOR_HOOK (PIDGET (inferior_ptid));
#else
solib_create_inferior_hook ();
#endif
/* Reinsert all breakpoints. (Those which were symbolic have
been reset to the proper address in the new a.out, thanks
to symbol_file_command...) */
insert_breakpoints ();
/* The next resume of this inferior should bring it to the shlib
startup breakpoints. (If the user had also set bp's on
"main" from the old (parent) process, then they'll auto-
matically get reset there in the new process.) */
}
/* Non-zero if we just simulating a single-step. This is needed
because we cannot remove the breakpoints in the inferior process
until after the `wait' in `wait_for_inferior'. */
static int singlestep_breakpoints_inserted_p = 0;
/* The thread we inserted single-step breakpoints for. */
static ptid_t singlestep_ptid;
/* PC when we started this single-step. */
static CORE_ADDR singlestep_pc;
/* If another thread hit the singlestep breakpoint, we save the original
thread here so that we can resume single-stepping it later. */
static ptid_t saved_singlestep_ptid;
static int stepping_past_singlestep_breakpoint;
/* If not equal to null_ptid, this means that after stepping over breakpoint
is finished, we need to switch to deferred_step_ptid, and step it.
The use case is when one thread has hit a breakpoint, and then the user
has switched to another thread and issued 'step'. We need to step over
breakpoint in the thread which hit the breakpoint, but then continue
stepping the thread user has selected. */
static ptid_t deferred_step_ptid;
/* Displaced stepping. */
/* In non-stop debugging mode, we must take special care to manage
breakpoints properly; in particular, the traditional strategy for
stepping a thread past a breakpoint it has hit is unsuitable.
'Displaced stepping' is a tactic for stepping one thread past a
breakpoint it has hit while ensuring that other threads running
concurrently will hit the breakpoint as they should.
The traditional way to step a thread T off a breakpoint in a
multi-threaded program in all-stop mode is as follows:
a0) Initially, all threads are stopped, and breakpoints are not
inserted.
a1) We single-step T, leaving breakpoints uninserted.
a2) We insert breakpoints, and resume all threads.
In non-stop debugging, however, this strategy is unsuitable: we
don't want to have to stop all threads in the system in order to
continue or step T past a breakpoint. Instead, we use displaced
stepping:
n0) Initially, T is stopped, other threads are running, and
breakpoints are inserted.
n1) We copy the instruction "under" the breakpoint to a separate
location, outside the main code stream, making any adjustments
to the instruction, register, and memory state as directed by
T's architecture.
n2) We single-step T over the instruction at its new location.
n3) We adjust the resulting register and memory state as directed
by T's architecture. This includes resetting T's PC to point
back into the main instruction stream.
n4) We resume T.
This approach depends on the following gdbarch methods:
- gdbarch_max_insn_length and gdbarch_displaced_step_location
indicate where to copy the instruction, and how much space must
be reserved there. We use these in step n1.
- gdbarch_displaced_step_copy_insn copies a instruction to a new
address, and makes any necessary adjustments to the instruction,
register contents, and memory. We use this in step n1.
- gdbarch_displaced_step_fixup adjusts registers and memory after
we have successfuly single-stepped the instruction, to yield the
same effect the instruction would have had if we had executed it
at its original address. We use this in step n3.
- gdbarch_displaced_step_free_closure provides cleanup.
The gdbarch_displaced_step_copy_insn and
gdbarch_displaced_step_fixup functions must be written so that
copying an instruction with gdbarch_displaced_step_copy_insn,
single-stepping across the copied instruction, and then applying
gdbarch_displaced_insn_fixup should have the same effects on the
thread's memory and registers as stepping the instruction in place
would have. Exactly which responsibilities fall to the copy and
which fall to the fixup is up to the author of those functions.
See the comments in gdbarch.sh for details.
Note that displaced stepping and software single-step cannot
currently be used in combination, although with some care I think
they could be made to. Software single-step works by placing
breakpoints on all possible subsequent instructions; if the
displaced instruction is a PC-relative jump, those breakpoints
could fall in very strange places --- on pages that aren't
executable, or at addresses that are not proper instruction
boundaries. (We do generally let other threads run while we wait
to hit the software single-step breakpoint, and they might
encounter such a corrupted instruction.) One way to work around
this would be to have gdbarch_displaced_step_copy_insn fully
simulate the effect of PC-relative instructions (and return NULL)
on architectures that use software single-stepping.
In non-stop mode, we can have independent and simultaneous step
requests, so more than one thread may need to simultaneously step
over a breakpoint. The current implementation assumes there is
only one scratch space per process. In this case, we have to
serialize access to the scratch space. If thread A wants to step
over a breakpoint, but we are currently waiting for some other
thread to complete a displaced step, we leave thread A stopped and
place it in the displaced_step_request_queue. Whenever a displaced
step finishes, we pick the next thread in the queue and start a new
displaced step operation on it. See displaced_step_prepare and
displaced_step_fixup for details. */
/* If this is not null_ptid, this is the thread carrying out a
displaced single-step. This thread's state will require fixing up
once it has completed its step. */
static ptid_t displaced_step_ptid;
struct displaced_step_request
{
ptid_t ptid;
struct displaced_step_request *next;
};
/* A queue of pending displaced stepping requests. */
struct displaced_step_request *displaced_step_request_queue;
/* The architecture the thread had when we stepped it. */
static struct gdbarch *displaced_step_gdbarch;
/* The closure provided gdbarch_displaced_step_copy_insn, to be used
for post-step cleanup. */
static struct displaced_step_closure *displaced_step_closure;
/* The address of the original instruction, and the copy we made. */
static CORE_ADDR displaced_step_original, displaced_step_copy;
/* Saved contents of copy area. */
static gdb_byte *displaced_step_saved_copy;
/* Enum strings for "set|show displaced-stepping". */
static const char can_use_displaced_stepping_auto[] = "auto";
static const char can_use_displaced_stepping_on[] = "on";
static const char can_use_displaced_stepping_off[] = "off";
static const char *can_use_displaced_stepping_enum[] =
{
can_use_displaced_stepping_auto,
can_use_displaced_stepping_on,
can_use_displaced_stepping_off,
NULL,
};
/* If ON, and the architecture supports it, GDB will use displaced
stepping to step over breakpoints. If OFF, or if the architecture
doesn't support it, GDB will instead use the traditional
hold-and-step approach. If AUTO (which is the default), GDB will
decide which technique to use to step over breakpoints depending on
which of all-stop or non-stop mode is active --- displaced stepping
in non-stop mode; hold-and-step in all-stop mode. */
static const char *can_use_displaced_stepping =
can_use_displaced_stepping_auto;
static void
show_can_use_displaced_stepping (struct ui_file *file, int from_tty,
struct cmd_list_element *c,
const char *value)
{
if (can_use_displaced_stepping == can_use_displaced_stepping_auto)
fprintf_filtered (file, _("\
Debugger's willingness to use displaced stepping to step over \
breakpoints is %s (currently %s).\n"),
value, non_stop ? "on" : "off");
else
fprintf_filtered (file, _("\
Debugger's willingness to use displaced stepping to step over \
breakpoints is %s.\n"), value);
}
/* Return non-zero if displaced stepping can/should be used to step
over breakpoints. */
static int
use_displaced_stepping (struct gdbarch *gdbarch)
{
return (((can_use_displaced_stepping == can_use_displaced_stepping_auto
&& non_stop)
|| can_use_displaced_stepping == can_use_displaced_stepping_on)
&& gdbarch_displaced_step_copy_insn_p (gdbarch)
&& !RECORD_IS_USED);
}
/* Clean out any stray displaced stepping state. */
static void
displaced_step_clear (void)
{
/* Indicate that there is no cleanup pending. */
displaced_step_ptid = null_ptid;
if (displaced_step_closure)
{
gdbarch_displaced_step_free_closure (displaced_step_gdbarch,
displaced_step_closure);
displaced_step_closure = NULL;
}
}
static void
cleanup_displaced_step_closure (void *ptr)
{
struct displaced_step_closure *closure = ptr;
gdbarch_displaced_step_free_closure (current_gdbarch, closure);
}
/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
void
displaced_step_dump_bytes (struct ui_file *file,
const gdb_byte *buf,
size_t len)
{
int i;
for (i = 0; i < len; i++)
fprintf_unfiltered (file, "%02x ", buf[i]);
fputs_unfiltered ("\n", file);
}
/* Prepare to single-step, using displaced stepping.
Note that we cannot use displaced stepping when we have a signal to
deliver. If we have a signal to deliver and an instruction to step
over, then after the step, there will be no indication from the
target whether the thread entered a signal handler or ignored the
signal and stepped over the instruction successfully --- both cases
result in a simple SIGTRAP. In the first case we mustn't do a
fixup, and in the second case we must --- but we can't tell which.
Comments in the code for 'random signals' in handle_inferior_event
explain how we handle this case instead.
Returns 1 if preparing was successful -- this thread is going to be
stepped now; or 0 if displaced stepping this thread got queued. */
static int
displaced_step_prepare (ptid_t ptid)
{
struct cleanup *old_cleanups, *ignore_cleanups;
struct regcache *regcache = get_thread_regcache (ptid);
struct gdbarch *gdbarch = get_regcache_arch (regcache);
CORE_ADDR original, copy;
ULONGEST len;
struct displaced_step_closure *closure;
/* We should never reach this function if the architecture does not
support displaced stepping. */
gdb_assert (gdbarch_displaced_step_copy_insn_p (gdbarch));
/* For the first cut, we're displaced stepping one thread at a
time. */
if (!ptid_equal (displaced_step_ptid, null_ptid))
{
/* Already waiting for a displaced step to finish. Defer this
request and place in queue. */
struct displaced_step_request *req, *new_req;
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: defering step of %s\n",
target_pid_to_str (ptid));
new_req = xmalloc (sizeof (*new_req));
new_req->ptid = ptid;
new_req->next = NULL;
if (displaced_step_request_queue)
{
for (req = displaced_step_request_queue;
req && req->next;
req = req->next)
;
req->next = new_req;
}
else
displaced_step_request_queue = new_req;
return 0;
}
else
{
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: stepping %s now\n",
target_pid_to_str (ptid));
}
displaced_step_clear ();
old_cleanups = save_inferior_ptid ();
inferior_ptid = ptid;
original = regcache_read_pc (regcache);
copy = gdbarch_displaced_step_location (gdbarch);
len = gdbarch_max_insn_length (gdbarch);
/* Save the original contents of the copy area. */
displaced_step_saved_copy = xmalloc (len);
ignore_cleanups = make_cleanup (free_current_contents,
&displaced_step_saved_copy);
read_memory (copy, displaced_step_saved_copy, len);
if (debug_displaced)
{
fprintf_unfiltered (gdb_stdlog, "displaced: saved 0x%s: ",
paddr_nz (copy));
displaced_step_dump_bytes (gdb_stdlog, displaced_step_saved_copy, len);
};
closure = gdbarch_displaced_step_copy_insn (gdbarch,
original, copy, regcache);
/* We don't support the fully-simulated case at present. */
gdb_assert (closure);
make_cleanup (cleanup_displaced_step_closure, closure);
/* Resume execution at the copy. */
regcache_write_pc (regcache, copy);
discard_cleanups (ignore_cleanups);
do_cleanups (old_cleanups);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "displaced: displaced pc to 0x%s\n",
paddr_nz (copy));
/* Save the information we need to fix things up if the step
succeeds. */
displaced_step_ptid = ptid;
displaced_step_gdbarch = gdbarch;
displaced_step_closure = closure;
displaced_step_original = original;
displaced_step_copy = copy;
return 1;
}
static void
displaced_step_clear_cleanup (void *ignore)
{
displaced_step_clear ();
}
static void
write_memory_ptid (ptid_t ptid, CORE_ADDR memaddr, const gdb_byte *myaddr, int len)
{
struct cleanup *ptid_cleanup = save_inferior_ptid ();
inferior_ptid = ptid;
write_memory (memaddr, myaddr, len);
do_cleanups (ptid_cleanup);
}
static void
displaced_step_fixup (ptid_t event_ptid, enum target_signal signal)
{
struct cleanup *old_cleanups;
/* Was this event for the pid we displaced? */
if (ptid_equal (displaced_step_ptid, null_ptid)
|| ! ptid_equal (displaced_step_ptid, event_ptid))
return;
old_cleanups = make_cleanup (displaced_step_clear_cleanup, 0);
/* Restore the contents of the copy area. */
{
ULONGEST len = gdbarch_max_insn_length (displaced_step_gdbarch);
write_memory_ptid (displaced_step_ptid, displaced_step_copy,
displaced_step_saved_copy, len);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "displaced: restored 0x%s\n",
paddr_nz (displaced_step_copy));
}
/* Did the instruction complete successfully? */
if (signal == TARGET_SIGNAL_TRAP)
{
/* Fix up the resulting state. */
gdbarch_displaced_step_fixup (displaced_step_gdbarch,
displaced_step_closure,
displaced_step_original,
displaced_step_copy,
get_thread_regcache (displaced_step_ptid));
}
else
{
/* Since the instruction didn't complete, all we can do is
relocate the PC. */
struct regcache *regcache = get_thread_regcache (event_ptid);
CORE_ADDR pc = regcache_read_pc (regcache);
pc = displaced_step_original + (pc - displaced_step_copy);
regcache_write_pc (regcache, pc);
}
do_cleanups (old_cleanups);
displaced_step_ptid = null_ptid;
/* Are there any pending displaced stepping requests? If so, run
one now. */
while (displaced_step_request_queue)
{
struct displaced_step_request *head;
ptid_t ptid;
CORE_ADDR actual_pc;
head = displaced_step_request_queue;
ptid = head->ptid;
displaced_step_request_queue = head->next;
xfree (head);
context_switch (ptid);
actual_pc = regcache_read_pc (get_thread_regcache (ptid));
if (breakpoint_here_p (actual_pc))
{
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog,
"displaced: stepping queued %s now\n",
target_pid_to_str (ptid));
displaced_step_prepare (ptid);
if (debug_displaced)
{
gdb_byte buf[4];
fprintf_unfiltered (gdb_stdlog, "displaced: run 0x%s: ",
paddr_nz (actual_pc));
read_memory (actual_pc, buf, sizeof (buf));
displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
}
target_resume (ptid, 1, TARGET_SIGNAL_0);
/* Done, we're stepping a thread. */
break;
}
else
{
int step;
struct thread_info *tp = inferior_thread ();
/* The breakpoint we were sitting under has since been
removed. */
tp->trap_expected = 0;
/* Go back to what we were trying to do. */
step = currently_stepping (tp);
if (debug_displaced)
fprintf_unfiltered (gdb_stdlog, "breakpoint is gone %s: step(%d)\n",
target_pid_to_str (tp->ptid), step);
target_resume (ptid, step, TARGET_SIGNAL_0);
tp->stop_signal = TARGET_SIGNAL_0;
/* This request was discarded. See if there's any other
thread waiting for its turn. */
}
}
}
/* Update global variables holding ptids to hold NEW_PTID if they were
holding OLD_PTID. */
static void
infrun_thread_ptid_changed (ptid_t old_ptid, ptid_t new_ptid)
{
struct displaced_step_request *it;
if (ptid_equal (inferior_ptid, old_ptid))
inferior_ptid = new_ptid;
if (ptid_equal (singlestep_ptid, old_ptid))
singlestep_ptid = new_ptid;
if (ptid_equal (displaced_step_ptid, old_ptid))
displaced_step_ptid = new_ptid;
if (ptid_equal (deferred_step_ptid, old_ptid))
deferred_step_ptid = new_ptid;
for (it = displaced_step_request_queue; it; it = it->next)
if (ptid_equal (it->ptid, old_ptid))
it->ptid = new_ptid;
}
/* Resuming. */
/* Things to clean up if we QUIT out of resume (). */
static void
resume_cleanups (void *ignore)
{
normal_stop ();
}
static const char schedlock_off[] = "off";
static const char schedlock_on[] = "on";
static const char schedlock_step[] = "step";
static const char *scheduler_enums[] = {
schedlock_off,
schedlock_on,
schedlock_step,
NULL
};
static const char *scheduler_mode = schedlock_off;
static void
show_scheduler_mode (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("\
Mode for locking scheduler during execution is \"%s\".\n"),
value);
}
static void
set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
{
if (!target_can_lock_scheduler)
{
scheduler_mode = schedlock_off;
error (_("Target '%s' cannot support this command."), target_shortname);
}
}
/* Try to setup for software single stepping over the specified location.
Return 1 if target_resume() should use hardware single step.
GDBARCH the current gdbarch.
PC the location to step over. */
static int
maybe_software_singlestep (struct gdbarch *gdbarch, CORE_ADDR pc)
{
int hw_step = 1;
if (gdbarch_software_single_step_p (gdbarch)
&& gdbarch_software_single_step (gdbarch, get_current_frame ()))
{
hw_step = 0;
/* Do not pull these breakpoints until after a `wait' in
`wait_for_inferior' */
singlestep_breakpoints_inserted_p = 1;
singlestep_ptid = inferior_ptid;
singlestep_pc = pc;
}
return hw_step;
}
/* Resume the inferior, but allow a QUIT. This is useful if the user
wants to interrupt some lengthy single-stepping operation
(for child processes, the SIGINT goes to the inferior, and so
we get a SIGINT random_signal, but for remote debugging and perhaps
other targets, that's not true).
STEP nonzero if we should step (zero to continue instead).
SIG is the signal to give the inferior (zero for none). */
void
resume (int step, enum target_signal sig)
{
int should_resume = 1;
struct cleanup *old_cleanups = make_cleanup (resume_cleanups, 0);
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct thread_info *tp = inferior_thread ();
CORE_ADDR pc = regcache_read_pc (regcache);
QUIT;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: resume (step=%d, signal=%d), "
"trap_expected=%d\n",
step, sig, tp->trap_expected);
/* Some targets (e.g. Solaris x86) have a kernel bug when stepping
over an instruction that causes a page fault without triggering
a hardware watchpoint. The kernel properly notices that it shouldn't
stop, because the hardware watchpoint is not triggered, but it forgets
the step request and continues the program normally.
Work around the problem by removing hardware watchpoints if a step is
requested, GDB will check for a hardware watchpoint trigger after the
step anyway. */
if (CANNOT_STEP_HW_WATCHPOINTS && step)
remove_hw_watchpoints ();
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (pc) == permanent_breakpoint_here)
{
if (gdbarch_skip_permanent_breakpoint_p (gdbarch))
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
else
error (_("\
The program is stopped at a permanent breakpoint, but GDB does not know\n\
how to step past a permanent breakpoint on this architecture. Try using\n\
a command like `return' or `jump' to continue execution."));
}
/* If enabled, step over breakpoints by executing a copy of the
instruction at a different address.
We can't use displaced stepping when we have a signal to deliver;
the comments for displaced_step_prepare explain why. The
comments in the handle_inferior event for dealing with 'random
signals' explain what we do instead. */
if (use_displaced_stepping (gdbarch)
&& tp->trap_expected
&& sig == TARGET_SIGNAL_0)
{
if (!displaced_step_prepare (inferior_ptid))
{
/* Got placed in displaced stepping queue. Will be resumed
later when all the currently queued displaced stepping
requests finish. The thread is not executing at this point,
and the call to set_executing will be made later. But we
need to call set_running here, since from frontend point of view,
the thread is running. */
set_running (inferior_ptid, 1);
discard_cleanups (old_cleanups);
return;
}
}
/* Do we need to do it the hard way, w/temp breakpoints? */
if (step)
step = maybe_software_singlestep (gdbarch, pc);
if (should_resume)
{
ptid_t resume_ptid;
resume_ptid = RESUME_ALL; /* Default */
/* If STEP is set, it's a request to use hardware stepping
facilities. But in that case, we should never
use singlestep breakpoint. */
gdb_assert (!(singlestep_breakpoints_inserted_p && step));
if (singlestep_breakpoints_inserted_p
&& stepping_past_singlestep_breakpoint)
{
/* The situation here is as follows. In thread T1 we wanted to
single-step. Lacking hardware single-stepping we've
set breakpoint at the PC of the next instruction -- call it
P. After resuming, we've hit that breakpoint in thread T2.
Now we've removed original breakpoint, inserted breakpoint
at P+1, and try to step to advance T2 past breakpoint.
We need to step only T2, as if T1 is allowed to freely run,
it can run past P, and if other threads are allowed to run,
they can hit breakpoint at P+1, and nested hits of single-step
breakpoints is not something we'd want -- that's complicated
to support, and has no value. */
resume_ptid = inferior_ptid;
}
if ((step || singlestep_breakpoints_inserted_p)
&& tp->trap_expected)
{
/* We're allowing a thread to run past a breakpoint it has
hit, by single-stepping the thread with the breakpoint
removed. In which case, we need to single-step only this
thread, and keep others stopped, as they can miss this
breakpoint if allowed to run.
The current code actually removes all breakpoints when
doing this, not just the one being stepped over, so if we
let other threads run, we can actually miss any
breakpoint, not just the one at PC. */
resume_ptid = inferior_ptid;
}
if (non_stop)
{
/* With non-stop mode on, threads are always handled
individually. */
resume_ptid = inferior_ptid;
}
else if ((scheduler_mode == schedlock_on)
|| (scheduler_mode == schedlock_step
&& (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
}
if (gdbarch_cannot_step_breakpoint (gdbarch))
{
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
if (step && breakpoint_inserted_here_p (pc))
step = 0;
}
if (debug_displaced
&& use_displaced_stepping (gdbarch)
&& tp->trap_expected)
{
struct regcache *resume_regcache = get_thread_regcache (resume_ptid);
CORE_ADDR actual_pc = regcache_read_pc (resume_regcache);
gdb_byte buf[4];
fprintf_unfiltered (gdb_stdlog, "displaced: run 0x%s: ",
paddr_nz (actual_pc));
read_memory (actual_pc, buf, sizeof (buf));
displaced_step_dump_bytes (gdb_stdlog, buf, sizeof (buf));
}
/* Install inferior's terminal modes. */
target_terminal_inferior ();
/* Avoid confusing the next resume, if the next stop/resume
happens to apply to another thread. */
tp->stop_signal = TARGET_SIGNAL_0;
target_resume (resume_ptid, step, sig);
}
discard_cleanups (old_cleanups);
}
/* Proceeding. */
/* Clear out all variables saying what to do when inferior is continued.
First do this, then set the ones you want, then call `proceed'. */
static void
clear_proceed_status_thread (struct thread_info *tp)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: clear_proceed_status_thread (%s)\n",
target_pid_to_str (tp->ptid));
tp->trap_expected = 0;
tp->step_range_start = 0;
tp->step_range_end = 0;
tp->step_frame_id = null_frame_id;
tp->step_over_calls = STEP_OVER_UNDEBUGGABLE;
tp->stop_requested = 0;
tp->stop_step = 0;
tp->proceed_to_finish = 0;
/* Discard any remaining commands or status from previous stop. */
bpstat_clear (&tp->stop_bpstat);
}
static int
clear_proceed_status_callback (struct thread_info *tp, void *data)
{
if (is_exited (tp->ptid))
return 0;
clear_proceed_status_thread (tp);
return 0;
}
void
clear_proceed_status (void)
{
if (!ptid_equal (inferior_ptid, null_ptid))
{
struct inferior *inferior;
if (non_stop)
{
/* If in non-stop mode, only delete the per-thread status
of the current thread. */
clear_proceed_status_thread (inferior_thread ());
}
else
{
/* In all-stop mode, delete the per-thread status of
*all* threads. */
iterate_over_threads (clear_proceed_status_callback, NULL);
}
inferior = current_inferior ();
inferior->stop_soon = NO_STOP_QUIETLY;
}
stop_after_trap = 0;
observer_notify_about_to_proceed ();
if (stop_registers)
{
regcache_xfree (stop_registers);
stop_registers = NULL;
}
}
/* This should be suitable for any targets that support threads. */
static int
prepare_to_proceed (int step)
{
ptid_t wait_ptid;
struct target_waitstatus wait_status;
/* Get the last target status returned by target_wait(). */
get_last_target_status (&wait_ptid, &wait_status);
/* Make sure we were stopped at a breakpoint. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
|| wait_status.value.sig != TARGET_SIGNAL_TRAP)
{
return 0;
}
/* Switched over from WAIT_PID. */
if (!ptid_equal (wait_ptid, minus_one_ptid)
&& !ptid_equal (inferior_ptid, wait_ptid))
{
struct regcache *regcache = get_thread_regcache (wait_ptid);
if (breakpoint_here_p (regcache_read_pc (regcache)))
{
/* If stepping, remember current thread to switch back to. */
if (step)
deferred_step_ptid = inferior_ptid;
/* Switch back to WAIT_PID thread. */
switch_to_thread (wait_ptid);
/* We return 1 to indicate that there is a breakpoint here,
so we need to step over it before continuing to avoid
hitting it straight away. */
return 1;
}
}
return 0;
}
/* Basic routine for continuing the program in various fashions.
ADDR is the address to resume at, or -1 for resume where stopped.
SIGGNAL is the signal to give it, or 0 for none,
or -1 for act according to how it stopped.
STEP is nonzero if should trap after one instruction.
-1 means return after that and print nothing.
You should probably set various step_... variables
before calling here, if you are stepping.
You should call clear_proceed_status before calling proceed. */
void
proceed (CORE_ADDR addr, enum target_signal siggnal, int step)
{
struct regcache *regcache;
struct gdbarch *gdbarch;
struct thread_info *tp;
CORE_ADDR pc;
int oneproc = 0;
/* If we're stopped at a fork/vfork, follow the branch set by the
"set follow-fork-mode" command; otherwise, we'll just proceed
resuming the current thread. */
if (!follow_fork ())
{
/* The target for some reason decided not to resume. */
normal_stop ();
return;
}
regcache = get_current_regcache ();
gdbarch = get_regcache_arch (regcache);
pc = regcache_read_pc (regcache);
if (step > 0)
step_start_function = find_pc_function (pc);
if (step < 0)
stop_after_trap = 1;
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc && breakpoint_here_p (pc)
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
oneproc = 1;
else if (gdbarch_single_step_through_delay_p (gdbarch)
&& gdbarch_single_step_through_delay (gdbarch,
get_current_frame ()))
/* We stepped onto an instruction that needs to be stepped
again before re-inserting the breakpoint, do so. */
oneproc = 1;
}
else
{
regcache_write_pc (regcache, addr);
}
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
paddr_nz (addr), siggnal, step);
if (non_stop)
/* In non-stop, each thread is handled individually. The context
must already be set to the right thread here. */
;
else
{
/* In a multi-threaded task we may select another thread and
then continue or step.
But if the old thread was stopped at a breakpoint, it will
immediately cause another breakpoint stop without any
execution (i.e. it will report a breakpoint hit incorrectly).
So we must step over it first.
prepare_to_proceed checks the current thread against the
thread that reported the most recent event. If a step-over
is required it returns TRUE and sets the current thread to
the old thread. */
if (prepare_to_proceed (step))
oneproc = 1;
}
/* prepare_to_proceed may change the current thread. */
tp = inferior_thread ();
if (oneproc)
{
tp->trap_expected = 1;
/* If displaced stepping is enabled, we can step over the
breakpoint without hitting it, so leave all breakpoints
inserted. Otherwise we need to disable all breakpoints, step
one instruction, and then re-add them when that step is
finished. */
if (!use_displaced_stepping (gdbarch))
remove_breakpoints ();
}
/* We can insert breakpoints if we're not trying to step over one,
or if we are stepping over one but we're using displaced stepping
to do so. */
if (! tp->trap_expected || use_displaced_stepping (gdbarch))
insert_breakpoints ();
if (!non_stop)
{
/* Pass the last stop signal to the thread we're resuming,
irrespective of whether the current thread is the thread that
got the last event or not. This was historically GDB's
behaviour before keeping a stop_signal per thread. */
struct thread_info *last_thread;
ptid_t last_ptid;
struct target_waitstatus last_status;
get_last_target_status (&last_ptid, &last_status);
if (!ptid_equal (inferior_ptid, last_ptid)
&& !ptid_equal (last_ptid, null_ptid)
&& !ptid_equal (last_ptid, minus_one_ptid))
{
last_thread = find_thread_ptid (last_ptid);
if (last_thread)
{
tp->stop_signal = last_thread->stop_signal;
last_thread->stop_signal = TARGET_SIGNAL_0;
}
}
}
if (siggnal != TARGET_SIGNAL_DEFAULT)
tp->stop_signal = siggnal;
/* If this signal should not be seen by program,
give it zero. Used for debugging signals. */
else if (!signal_program[tp->stop_signal])
tp->stop_signal = TARGET_SIGNAL_0;
annotate_starting ();
/* Make sure that output from GDB appears before output from the
inferior. */
gdb_flush (gdb_stdout);
/* Refresh prev_pc value just prior to resuming. This used to be
done in stop_stepping, however, setting prev_pc there did not handle
scenarios such as inferior function calls or returning from
a function via the return command. In those cases, the prev_pc
value was not set properly for subsequent commands. The prev_pc value
is used to initialize the starting line number in the ecs. With an
invalid value, the gdb next command ends up stopping at the position
represented by the next line table entry past our start position.
On platforms that generate one line table entry per line, this
is not a problem. However, on the ia64, the compiler generates
extraneous line table entries that do not increase the line number.
When we issue the gdb next command on the ia64 after an inferior call
or a return command, we often end up a few instructions forward, still
within the original line we started.
An attempt was made to have init_execution_control_state () refresh
the prev_pc value before calculating the line number. This approach
did not work because on platforms that use ptrace, the pc register
cannot be read unless the inferior is stopped. At that point, we
are not guaranteed the inferior is stopped and so the regcache_read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
updated correctly when the inferior is stopped. */
tp->prev_pc = regcache_read_pc (get_current_regcache ());
/* Fill in with reasonable starting values. */
init_thread_stepping_state (tp);
/* Reset to normal state. */
init_infwait_state ();
/* Resume inferior. */
resume (oneproc || step || bpstat_should_step (), tp->stop_signal);
/* Wait for it to stop (if not standalone)
and in any case decode why it stopped, and act accordingly. */
/* Do this only if we are not using the event loop, or if the target
does not support asynchronous execution. */
if (!target_can_async_p ())
{
wait_for_inferior (0);
normal_stop ();
}
}
/* Start remote-debugging of a machine over a serial link. */
void
start_remote (int from_tty)
{
struct inferior *inferior;
init_wait_for_inferior ();
inferior = current_inferior ();
inferior->stop_soon = STOP_QUIETLY_REMOTE;
/* Always go on waiting for the target, regardless of the mode. */
/* FIXME: cagney/1999-09-23: At present it isn't possible to
indicate to wait_for_inferior that a target should timeout if
nothing is returned (instead of just blocking). Because of this,
targets expecting an immediate response need to, internally, set
things up so that the target_wait() is forced to eventually
timeout. */
/* FIXME: cagney/1999-09-24: It isn't possible for target_open() to
differentiate to its caller what the state of the target is after
the initial open has been performed. Here we're assuming that
the target has stopped. It should be possible to eventually have
target_open() return to the caller an indication that the target
is currently running and GDB state should be set to the same as
for an async run. */
wait_for_inferior (0);
/* Now that the inferior has stopped, do any bookkeeping like
loading shared libraries. We want to do this before normal_stop,
so that the displayed frame is up to date. */
post_create_inferior (&current_target, from_tty);
normal_stop ();
}
/* Initialize static vars when a new inferior begins. */
void
init_wait_for_inferior (void)
{
/* These are meaningless until the first time through wait_for_inferior. */
breakpoint_init_inferior (inf_starting);
clear_proceed_status ();
stepping_past_singlestep_breakpoint = 0;
deferred_step_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
previous_inferior_ptid = null_ptid;
init_infwait_state ();
displaced_step_clear ();
}
/* This enum encodes possible reasons for doing a target_wait, so that
wfi can call target_wait in one place. (Ultimately the call will be
moved out of the infinite loop entirely.) */
enum infwait_states
{
infwait_normal_state,
infwait_thread_hop_state,
infwait_step_watch_state,
infwait_nonstep_watch_state
};
/* Why did the inferior stop? Used to print the appropriate messages
to the interface from within handle_inferior_event(). */
enum inferior_stop_reason
{
/* Step, next, nexti, stepi finished. */
END_STEPPING_RANGE,
/* Inferior terminated by signal. */
SIGNAL_EXITED,
/* Inferior exited. */
EXITED,
/* Inferior received signal, and user asked to be notified. */
SIGNAL_RECEIVED,
/* Reverse execution -- target ran out of history info. */
NO_HISTORY
};
/* The PTID we'll do a target_wait on.*/
ptid_t waiton_ptid;
/* Current inferior wait state. */
enum infwait_states infwait_state;
/* Data to be passed around while handling an event. This data is
discarded between events. */
struct execution_control_state
{
ptid_t ptid;
/* The thread that got the event, if this was a thread event; NULL
otherwise. */
struct thread_info *event_thread;
struct target_waitstatus ws;
int random_signal;
CORE_ADDR stop_func_start;
CORE_ADDR stop_func_end;
char *stop_func_name;
int new_thread_event;
int wait_some_more;
};
void init_execution_control_state (struct execution_control_state *ecs);
void handle_inferior_event (struct execution_control_state *ecs);
static void handle_step_into_function (struct execution_control_state *ecs);
static void handle_step_into_function_backward (struct execution_control_state *ecs);
static void insert_step_resume_breakpoint_at_frame (struct frame_info *step_frame);
static void insert_step_resume_breakpoint_at_caller (struct frame_info *);
static void insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
struct frame_id sr_id);
static void insert_longjmp_resume_breakpoint (CORE_ADDR);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
static void print_stop_reason (enum inferior_stop_reason stop_reason,
int stop_info);
/* Callback for iterate over threads. If the thread is stopped, but
the user/frontend doesn't know about that yet, go through
normal_stop, as if the thread had just stopped now. ARG points at
a ptid. If PTID is MINUS_ONE_PTID, applies to all threads. If
ptid_is_pid(PTID) is true, applies to all threads of the process
pointed at by PTID. Otherwise, apply only to the thread pointed by
PTID. */
static int
infrun_thread_stop_requested_callback (struct thread_info *info, void *arg)
{
ptid_t ptid = * (ptid_t *) arg;
if ((ptid_equal (info->ptid, ptid)
|| ptid_equal (minus_one_ptid, ptid)
|| (ptid_is_pid (ptid)
&& ptid_get_pid (ptid) == ptid_get_pid (info->ptid)))
&& is_running (info->ptid)
&& !is_executing (info->ptid))
{
struct cleanup *old_chain;
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
memset (ecs, 0, sizeof (*ecs));
old_chain = make_cleanup_restore_current_thread ();
switch_to_thread (info->ptid);
/* Go through handle_inferior_event/normal_stop, so we always
have consistent output as if the stop event had been
reported. */
ecs->ptid = info->ptid;
ecs->event_thread = find_thread_ptid (info->ptid);
ecs->ws.kind = TARGET_WAITKIND_STOPPED;
ecs->ws.value.sig = TARGET_SIGNAL_0;
handle_inferior_event (ecs);
if (!ecs->wait_some_more)
{
struct thread_info *tp;
normal_stop ();
/* Finish off the continuations. The continations
themselves are responsible for realising the thread
didn't finish what it was supposed to do. */
tp = inferior_thread ();
do_all_intermediate_continuations_thread (tp);
do_all_continuations_thread (tp);
}
do_cleanups (old_chain);
}
return 0;
}
/* This function is attached as a "thread_stop_requested" observer.
Cleanup local state that assumed the PTID was to be resumed, and
report the stop to the frontend. */
static void
infrun_thread_stop_requested (ptid_t ptid)
{
struct displaced_step_request *it, *next, *prev = NULL;
/* PTID was requested to stop. Remove it from the displaced
stepping queue, so we don't try to resume it automatically. */
for (it = displaced_step_request_queue; it; it = next)
{
next = it->next;
if (ptid_equal (it->ptid, ptid)
|| ptid_equal (minus_one_ptid, ptid)
|| (ptid_is_pid (ptid)
&& ptid_get_pid (ptid) == ptid_get_pid (it->ptid)))
{
if (displaced_step_request_queue == it)
displaced_step_request_queue = it->next;
else
prev->next = it->next;
xfree (it);
}
else
prev = it;
}
iterate_over_threads (infrun_thread_stop_requested_callback, &ptid);
}
static void
infrun_thread_thread_exit (struct thread_info *tp, int silent)
{
if (ptid_equal (target_last_wait_ptid, tp->ptid))
nullify_last_target_wait_ptid ();
}
/* Callback for iterate_over_threads. */
static int
delete_step_resume_breakpoint_callback (struct thread_info *info, void *data)
{
if (is_exited (info->ptid))
return 0;
delete_step_resume_breakpoint (info);
return 0;
}
/* In all-stop, delete the step resume breakpoint of any thread that
had one. In non-stop, delete the step resume breakpoint of the
thread that just stopped. */
static void
delete_step_thread_step_resume_breakpoint (void)
{
if (!target_has_execution
|| ptid_equal (inferior_ptid, null_ptid))
/* If the inferior has exited, we have already deleted the step
resume breakpoints out of GDB's lists. */
return;
if (non_stop)
{
/* If in non-stop mode, only delete the step-resume or
longjmp-resume breakpoint of the thread that just stopped
stepping. */
struct thread_info *tp = inferior_thread ();
delete_step_resume_breakpoint (tp);
}
else
/* In all-stop mode, delete all step-resume and longjmp-resume
breakpoints of any thread that had them. */
iterate_over_threads (delete_step_resume_breakpoint_callback, NULL);
}
/* A cleanup wrapper. */
static void
delete_step_thread_step_resume_breakpoint_cleanup (void *arg)
{
delete_step_thread_step_resume_breakpoint ();
}
/* Pretty print the results of target_wait, for debugging purposes. */
static void
print_target_wait_results (ptid_t waiton_ptid, ptid_t result_ptid,
const struct target_waitstatus *ws)
{
char *status_string = target_waitstatus_to_string (ws);
struct ui_file *tmp_stream = mem_fileopen ();
char *text;
long len;
/* The text is split over several lines because it was getting too long.
Call fprintf_unfiltered (gdb_stdlog) once so that the text is still
output as a unit; we want only one timestamp printed if debug_timestamp
is set. */
fprintf_unfiltered (tmp_stream,
"infrun: target_wait (%d", PIDGET (waiton_ptid));
if (PIDGET (waiton_ptid) != -1)
fprintf_unfiltered (tmp_stream,
" [%s]", target_pid_to_str (waiton_ptid));
fprintf_unfiltered (tmp_stream, ", status) =\n");
fprintf_unfiltered (tmp_stream,
"infrun: %d [%s],\n",
PIDGET (result_ptid), target_pid_to_str (result_ptid));
fprintf_unfiltered (tmp_stream,
"infrun: %s\n",
status_string);
text = ui_file_xstrdup (tmp_stream, &len);
/* This uses %s in part to handle %'s in the text, but also to avoid
a gcc error: the format attribute requires a string literal. */
fprintf_unfiltered (gdb_stdlog, "%s", text);
xfree (status_string);
xfree (text);
ui_file_delete (tmp_stream);
}
/* Wait for control to return from inferior to debugger.
If TREAT_EXEC_AS_SIGTRAP is non-zero, then handle EXEC signals
as if they were SIGTRAP signals. This can be useful during
the startup sequence on some targets such as HP/UX, where
we receive an EXEC event instead of the expected SIGTRAP.
If inferior gets a signal, we may decide to start it up again
instead of returning. That is why there is a loop in this function.
When this function actually returns it means the inferior
should be left stopped and GDB should read more commands. */
void
wait_for_inferior (int treat_exec_as_sigtrap)
{
struct cleanup *old_cleanups;
struct execution_control_state ecss;
struct execution_control_state *ecs;
if (debug_infrun)
fprintf_unfiltered
(gdb_stdlog, "infrun: wait_for_inferior (treat_exec_as_sigtrap=%d)\n",
treat_exec_as_sigtrap);
old_cleanups =
make_cleanup (delete_step_thread_step_resume_breakpoint_cleanup, NULL);
ecs = &ecss;
memset (ecs, 0, sizeof (*ecs));
overlay_cache_invalid = 1;
/* We'll update this if & when we switch to a new thread. */
previous_inferior_ptid = inferior_ptid;
/* We have to invalidate the registers BEFORE calling target_wait
because they can be loaded from the target while in target_wait.
This makes remote debugging a bit more efficient for those
targets that provide critical registers as part of their normal
status mechanism. */
registers_changed ();
while (1)
{
struct cleanup *old_chain;
if (deprecated_target_wait_hook)
ecs->ptid = deprecated_target_wait_hook (waiton_ptid, &ecs->ws, 0);
else
ecs->ptid = target_wait (waiton_ptid, &ecs->ws, 0);
if (debug_infrun)
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
if (treat_exec_as_sigtrap && ecs->ws.kind == TARGET_WAITKIND_EXECD)
{
xfree (ecs->ws.value.execd_pathname);
ecs->ws.kind = TARGET_WAITKIND_STOPPED;
ecs->ws.value.sig = TARGET_SIGNAL_TRAP;
}
/* If an error happens while handling the event, propagate GDB's
knowledge of the executing state to the frontend/user running
state. */
old_chain = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
/* No error, don't finish the state yet. */
discard_cleanups (old_chain);
if (!ecs->wait_some_more)
break;
}
do_cleanups (old_cleanups);
}
/* Asynchronous version of wait_for_inferior. It is called by the
event loop whenever a change of state is detected on the file
descriptor corresponding to the target. It can be called more than
once to complete a single execution command. In such cases we need
to keep the state in a global variable ECSS. If it is the last time
that this function is called for a single execution command, then
report to the user that the inferior has stopped, and do the
necessary cleanups. */
void
fetch_inferior_event (void *client_data)
{
struct execution_control_state ecss;
struct execution_control_state *ecs = &ecss;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
struct cleanup *ts_old_chain;
int was_sync = sync_execution;
memset (ecs, 0, sizeof (*ecs));
overlay_cache_invalid = 1;
/* We can only rely on wait_for_more being correct before handling
the event in all-stop, but previous_inferior_ptid isn't used in
non-stop. */
if (!ecs->wait_some_more)
/* We'll update this if & when we switch to a new thread. */
previous_inferior_ptid = inferior_ptid;
if (non_stop)
/* In non-stop mode, the user/frontend should not notice a thread
switch due to internal events. Make sure we reverse to the
user selected thread and frame after handling the event and
running any breakpoint commands. */
make_cleanup_restore_current_thread ();
/* We have to invalidate the registers BEFORE calling target_wait
because they can be loaded from the target while in target_wait.
This makes remote debugging a bit more efficient for those
targets that provide critical registers as part of their normal
status mechanism. */
registers_changed ();
if (deprecated_target_wait_hook)
ecs->ptid =
deprecated_target_wait_hook (waiton_ptid, &ecs->ws, TARGET_WNOHANG);
else
ecs->ptid = target_wait (waiton_ptid, &ecs->ws, TARGET_WNOHANG);
if (debug_infrun)
print_target_wait_results (waiton_ptid, ecs->ptid, &ecs->ws);
if (non_stop
&& ecs->ws.kind != TARGET_WAITKIND_IGNORE
&& ecs->ws.kind != TARGET_WAITKIND_EXITED
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
/* In non-stop mode, each thread is handled individually. Switch
early, so the global state is set correctly for this
thread. */
context_switch (ecs->ptid);
/* If an error happens while handling the event, propagate GDB's
knowledge of the executing state to the frontend/user running
state. */
if (!non_stop)
ts_old_chain = make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
else
ts_old_chain = make_cleanup (finish_thread_state_cleanup, &ecs->ptid);
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
if (!ecs->wait_some_more)
{
struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid));
delete_step_thread_step_resume_breakpoint ();
/* We may not find an inferior if this was a process exit. */
if (inf == NULL || inf->stop_soon == NO_STOP_QUIETLY)
normal_stop ();
if (target_has_execution
&& ecs->ws.kind != TARGET_WAITKIND_EXITED
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
&& ecs->event_thread->step_multi
&& ecs->event_thread->stop_step)
inferior_event_handler (INF_EXEC_CONTINUE, NULL);
else
inferior_event_handler (INF_EXEC_COMPLETE, NULL);
}
/* No error, don't finish the thread states yet. */
discard_cleanups (ts_old_chain);
/* Revert thread and frame. */
do_cleanups (old_chain);
/* If the inferior was in sync execution mode, and now isn't,
restore the prompt. */
if (was_sync && !sync_execution)
display_gdb_prompt (0);
}
/* Prepare an execution control state for looping through a
wait_for_inferior-type loop. */
void
init_execution_control_state (struct execution_control_state *ecs)
{
ecs->random_signal = 0;
}
/* Clear context switchable stepping state. */
void
init_thread_stepping_state (struct thread_info *tss)
{
struct symtab_and_line sal;
tss->stepping_over_breakpoint = 0;
tss->step_after_step_resume_breakpoint = 0;
tss->stepping_through_solib_after_catch = 0;
tss->stepping_through_solib_catchpoints = NULL;
sal = find_pc_line (tss->prev_pc, 0);
tss->current_line = sal.line;
tss->current_symtab = sal.symtab;
}
/* Return the cached copy of the last pid/waitstatus returned by
target_wait()/deprecated_target_wait_hook(). The data is actually
cached by handle_inferior_event(), which gets called immediately
after target_wait()/deprecated_target_wait_hook(). */
void
get_last_target_status (ptid_t *ptidp, struct target_waitstatus *status)
{
*ptidp = target_last_wait_ptid;
*status = target_last_waitstatus;
}
void
nullify_last_target_wait_ptid (void)
{
target_last_wait_ptid = minus_one_ptid;
}
/* Switch thread contexts. */
static void
context_switch (ptid_t ptid)
{
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: Switching context from %s ",
target_pid_to_str (inferior_ptid));
fprintf_unfiltered (gdb_stdlog, "to %s\n",
target_pid_to_str (ptid));
}
switch_to_thread (ptid);
}
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
struct regcache *regcache;
struct gdbarch *gdbarch;
CORE_ADDR breakpoint_pc;
/* If we've hit a breakpoint, we'll normally be stopped with SIGTRAP. If
we aren't, just return.
We assume that waitkinds other than TARGET_WAITKIND_STOPPED are not
affected by gdbarch_decr_pc_after_break. Other waitkinds which are
implemented by software breakpoints should be handled through the normal
breakpoint layer.
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
gdbarch_decr_pc_after_break. I don't know any specific target that
generates these signals at breakpoints (the code has been in GDB since at
least 1992) so I can not guess how to handle them here.
In earlier versions of GDB, a target with
gdbarch_have_nonsteppable_watchpoint would have the PC after hitting a
watchpoint affected by gdbarch_decr_pc_after_break. I haven't found any
target with both of these set in GDB history, and it seems unlikely to be
correct, so gdbarch_have_nonsteppable_watchpoint is not checked here. */
if (ecs->ws.kind != TARGET_WAITKIND_STOPPED)
return;
if (ecs->ws.value.sig != TARGET_SIGNAL_TRAP)
return;
/* In reverse execution, when a breakpoint is hit, the instruction
under it has already been de-executed. The reported PC always
points at the breakpoint address, so adjusting it further would
be wrong. E.g., consider this case on a decr_pc_after_break == 1
architecture:
B1 0x08000000 : INSN1
B2 0x08000001 : INSN2
0x08000002 : INSN3
PC -> 0x08000003 : INSN4
Say you're stopped at 0x08000003 as above. Reverse continuing
from that point should hit B2 as below. Reading the PC when the
SIGTRAP is reported should read 0x08000001 and INSN2 should have
been de-executed already.
B1 0x08000000 : INSN1
B2 PC -> 0x08000001 : INSN2
0x08000002 : INSN3
0x08000003 : INSN4
We can't apply the same logic as for forward execution, because
we would wrongly adjust the PC to 0x08000000, since there's a
breakpoint at PC - 1. We'd then report a hit on B1, although
INSN1 hadn't been de-executed yet. Doing nothing is the correct
behaviour. */
if (execution_direction == EXEC_REVERSE)
return;
/* If this target does not decrement the PC after breakpoints, then
we have nothing to do. */
regcache = get_thread_regcache (ecs->ptid);
gdbarch = get_regcache_arch (regcache);
if (gdbarch_decr_pc_after_break (gdbarch) == 0)
return;
/* Find the location where (if we've hit a breakpoint) the
breakpoint would be. */
breakpoint_pc = regcache_read_pc (regcache)
- gdbarch_decr_pc_after_break (gdbarch);
/* Check whether there actually is a software breakpoint inserted at
that location.
If in non-stop mode, a race condition is possible where we've
removed a breakpoint, but stop events for that breakpoint were
already queued and arrive later. To suppress those spurious
SIGTRAPs, we keep a list of such breakpoint locations for a bit,
and retire them after a number of stop events are reported. */
if (software_breakpoint_inserted_here_p (breakpoint_pc)
|| (non_stop && moribund_breakpoint_here_p (breakpoint_pc)))
{
struct cleanup *old_cleanups = NULL;
if (RECORD_IS_USED)
old_cleanups = record_gdb_operation_disable_set ();
/* When using hardware single-step, a SIGTRAP is reported for both
a completed single-step and a software breakpoint. Need to
differentiate between the two, as the latter needs adjusting
but the former does not.
The SIGTRAP can be due to a completed hardware single-step only if
- we didn't insert software single-step breakpoints
- the thread to be examined is still the current thread
- this thread is currently being stepped
If any of these events did not occur, we must have stopped due
to hitting a software breakpoint, and have to back up to the
breakpoint address.
As a special case, we could have hardware single-stepped a
software breakpoint. In this case (prev_pc == breakpoint_pc),
we also need to back up to the breakpoint address. */
if (singlestep_breakpoints_inserted_p
|| !ptid_equal (ecs->ptid, inferior_ptid)
|| !currently_stepping (ecs->event_thread)
|| ecs->event_thread->prev_pc == breakpoint_pc)
regcache_write_pc (regcache, breakpoint_pc);
if (RECORD_IS_USED)
do_cleanups (old_cleanups);
}
}
void
init_infwait_state (void)
{
waiton_ptid = pid_to_ptid (-1);
infwait_state = infwait_normal_state;
}
void
error_is_running (void)
{
error (_("\
Cannot execute this command while the selected thread is running."));
}
void
ensure_not_running (void)
{
if (is_running (inferior_ptid))
error_is_running ();
}
/* Given an execution control state that has been freshly filled in
by an event from the inferior, figure out what it means and take
appropriate action. */
void
handle_inferior_event (struct execution_control_state *ecs)
{
int sw_single_step_trap_p = 0;
int stopped_by_watchpoint;
int stepped_after_stopped_by_watchpoint = 0;
struct symtab_and_line stop_pc_sal;
enum stop_kind stop_soon;
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
&& ecs->ws.kind != TARGET_WAITKIND_IGNORE)
{
struct inferior *inf = find_inferior_pid (ptid_get_pid (ecs->ptid));
gdb_assert (inf);
stop_soon = inf->stop_soon;
}
else
stop_soon = NO_STOP_QUIETLY;
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
target_last_waitstatus = ecs->ws;
/* Always clear state belonging to the previous time we stopped. */
stop_stack_dummy = 0;
/* If it's a new process, add it to the thread database */
ecs->new_thread_event = (!ptid_equal (ecs->ptid, inferior_ptid)
&& !ptid_equal (ecs->ptid, minus_one_ptid)
&& !in_thread_list (ecs->ptid));
if (ecs->ws.kind != TARGET_WAITKIND_EXITED
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
add_thread (ecs->ptid);
ecs->event_thread = find_thread_ptid (ecs->ptid);
/* Dependent on valid ECS->EVENT_THREAD. */
adjust_pc_after_break (ecs);
/* Dependent on the current PC value modified by adjust_pc_after_break. */
reinit_frame_cache ();
if (ecs->ws.kind != TARGET_WAITKIND_IGNORE)
{
breakpoint_retire_moribund ();
/* Mark the non-executing threads accordingly. In all-stop, all
threads of all processes are stopped when we get any event
reported. In non-stop mode, only the event thread stops. If
we're handling a process exit in non-stop mode, there's
nothing to do, as threads of the dead process are gone, and
threads of any other process were left running. */
if (!non_stop)
set_executing (minus_one_ptid, 0);
else if (ecs->ws.kind != TARGET_WAITKIND_SIGNALLED
&& ecs->ws.kind != TARGET_WAITKIND_EXITED)
set_executing (inferior_ptid, 0);
}
switch (infwait_state)
{
case infwait_thread_hop_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: infwait_thread_hop_state\n");
/* Cancel the waiton_ptid. */
waiton_ptid = pid_to_ptid (-1);
break;
case infwait_normal_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: infwait_normal_state\n");
break;
case infwait_step_watch_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: infwait_step_watch_state\n");
stepped_after_stopped_by_watchpoint = 1;
break;
case infwait_nonstep_watch_state:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: infwait_nonstep_watch_state\n");
insert_breakpoints ();
/* FIXME-maybe: is this cleaner than setting a flag? Does it
handle things like signals arriving and other things happening
in combination correctly? */
stepped_after_stopped_by_watchpoint = 1;
break;
default:
internal_error (__FILE__, __LINE__, _("bad switch"));
}
infwait_state = infwait_normal_state;
switch (ecs->ws.kind)
{
case TARGET_WAITKIND_LOADED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_LOADED\n");
/* Ignore gracefully during startup of the inferior, as it might
be the shell which has just loaded some objects, otherwise
add the symbols for the newly loaded objects. Also ignore at
the beginning of an attach or remote session; we will query
the full list of libraries once the connection is
established. */
if (stop_soon == NO_STOP_QUIETLY)
{
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
terminal for any messages produced by
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
stack's section table is kept up-to-date. Architectures,
(e.g., PPC64), use the section table to perform
operations such as address => section name and hence
require the table to contain all sections (including
those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
exec_ops to SOLIB_ADD. This is because current GDB is
only tooled to propagate section_table changes out from
the "current_target" (see target_resize_to_sections), and
not up from the exec stratum. This, of course, isn't
right. "infrun.c" should only interact with the
exec/process stratum, instead relying on the target stack
to propagate relevant changes (stop, section table
changed, ...) up to other layers. */
#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, &current_target, auto_solib_add);
#else
solib_add (NULL, 0, &current_target, auto_solib_add);
#endif
target_terminal_inferior ();
/* If requested, stop when the dynamic linker notifies
gdb of events. This allows the user to get control
and place breakpoints in initializer routines for
dynamically loaded objects (among other things). */
if (stop_on_solib_events)
{
stop_stepping (ecs);
return;
}
/* NOTE drow/2007-05-11: This might be a good place to check
for "catch load". */
}
/* If we are skipping through a shell, or through shared library
loading that we aren't interested in, resume the program. If
we're running the program normally, also resume. But stop if
we're attaching or setting up a remote connection. */
if (stop_soon == STOP_QUIETLY || stop_soon == NO_STOP_QUIETLY)
{
/* Loading of shared libraries might have changed breakpoint
addresses. Make sure new breakpoints are inserted. */
if (stop_soon == NO_STOP_QUIETLY
&& !breakpoints_always_inserted_mode ())
insert_breakpoints ();
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
break;
case TARGET_WAITKIND_SPURIOUS:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SPURIOUS\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_EXITED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXITED\n");
inferior_ptid = ecs->ptid;
target_terminal_ours (); /* Must do this before mourn anyway */
print_stop_reason (EXITED, ecs->ws.value.integer);
/* Record the exit code in the convenience variable $_exitcode, so
that the user can inspect this again later. */
set_internalvar (lookup_internalvar ("_exitcode"),
value_from_longest (builtin_type_int32,
(LONGEST) ecs->ws.value.integer));
gdb_flush (gdb_stdout);
target_mourn_inferior ();
singlestep_breakpoints_inserted_p = 0;
stop_print_frame = 0;
stop_stepping (ecs);
return;
case TARGET_WAITKIND_SIGNALLED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SIGNALLED\n");
inferior_ptid = ecs->ptid;
stop_print_frame = 0;
target_terminal_ours (); /* Must do this before mourn anyway */
/* Note: By definition of TARGET_WAITKIND_SIGNALLED, we shouldn't
reach here unless the inferior is dead. However, for years
target_kill() was called here, which hints that fatal signals aren't
really fatal on some systems. If that's true, then some changes
may be needed. */
target_mourn_inferior ();
print_stop_reason (SIGNAL_EXITED, ecs->ws.value.sig);
singlestep_breakpoints_inserted_p = 0;
stop_stepping (ecs);
return;
/* The following are the only cases in which we keep going;
the above cases end in a continue or goto. */
case TARGET_WAITKIND_FORKED:
case TARGET_WAITKIND_VFORKED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_FORKED\n");
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
context_switch (ecs->ptid);
reinit_frame_cache ();
}
/* Immediately detach breakpoints from the child before there's
any chance of letting the user delete breakpoints from the
breakpoint lists. If we don't do this early, it's easy to
leave left over traps in the child, vis: "break foo; catch
fork; c; <fork>; del; c; <child calls foo>". We only follow
the fork on the last `continue', and by that time the
breakpoint at "foo" is long gone from the breakpoint table.
If we vforked, then we don't need to unpatch here, since both
parent and child are sharing the same memory pages; we'll
need to unpatch at follow/detach time instead to be certain
that new breakpoints added between catchpoint hit time and
vfork follow are detached. */
if (ecs->ws.kind != TARGET_WAITKIND_VFORKED)
{
int child_pid = ptid_get_pid (ecs->ws.value.related_pid);
/* This won't actually modify the breakpoint list, but will
physically remove the breakpoints from the child. */
detach_breakpoints (child_pid);
}
/* In case the event is caught by a catchpoint, remember that
the event is to be followed at the next resume of the thread,
and not immediately. */
ecs->event_thread->pending_follow = ecs->ws;
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
int should_resume;
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
should_resume = follow_fork ();
ecs->event_thread = inferior_thread ();
ecs->ptid = inferior_ptid;
if (should_resume)
keep_going (ecs);
else
stop_stepping (ecs);
return;
}
ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
case TARGET_WAITKIND_EXECD:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_EXECD\n");
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
context_switch (ecs->ptid);
reinit_frame_cache ();
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
/* This causes the eventpoints and symbol table to be reset.
Must do this now, before trying to determine whether to
stop. */
follow_exec (inferior_ptid, ecs->ws.value.execd_pathname);
ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
/* Note that this may be referenced from inside
bpstat_stop_status above, through inferior_has_execd. */
xfree (ecs->ws.value.execd_pathname);
ecs->ws.value.execd_pathname = NULL;
/* If no catchpoint triggered for this, then keep going. */
if (ecs->random_signal)
{
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
keep_going (ecs);
return;
}
ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
goto process_event_stop_test;
/* Be careful not to try to gather much state about a thread
that's in a syscall. It's frequently a losing proposition. */
case TARGET_WAITKIND_SYSCALL_ENTRY:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_ENTRY\n");
resume (0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
/* Before examining the threads further, step this thread to
get it entirely out of the syscall. (We get notice of the
event when the thread is just on the verge of exiting a
syscall. Stepping one instruction seems to get it back
into user code.) */
case TARGET_WAITKIND_SYSCALL_RETURN:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_SYSCALL_RETURN\n");
target_resume (ecs->ptid, 1, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
case TARGET_WAITKIND_STOPPED:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_STOPPED\n");
ecs->event_thread->stop_signal = ecs->ws.value.sig;
break;
case TARGET_WAITKIND_NO_HISTORY:
/* Reverse execution: target ran out of history info. */
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
print_stop_reason (NO_HISTORY, 0);
stop_stepping (ecs);
return;
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
done what needs to be done, if anything.
One of the possible circumstances for this is when the
inferior produces output for the console. The inferior has
not stopped, and we are ignoring the event. Another possible
circumstance is any event which the lower level knows will be
reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: TARGET_WAITKIND_IGNORE\n");
prepare_to_wait (ecs);
return;
}
if (ecs->new_thread_event)
{
if (non_stop)
/* Non-stop assumes that the target handles adding new threads
to the thread list. */
internal_error (__FILE__, __LINE__, "\
targets should add new threads to the thread list themselves in non-stop mode.");
/* We may want to consider not doing a resume here in order to
give the user a chance to play with the new thread. It might
be good to make that a user-settable option. */
/* At this point, all threads are stopped (happens automatically
in either the OS or the native code). Therefore we need to
continue all threads in order to make progress. */
target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
if (ecs->ws.kind == TARGET_WAITKIND_STOPPED)
{
/* Do we need to clean up the state of a thread that has
completed a displaced single-step? (Doing so usually affects
the PC, so do it here, before we set stop_pc.) */
displaced_step_fixup (ecs->ptid, ecs->event_thread->stop_signal);
/* If we either finished a single-step or hit a breakpoint, but
the user wanted this thread to be stopped, pretend we got a
SIG0 (generic unsignaled stop). */
if (ecs->event_thread->stop_requested
&& ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
}
stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid));
if (debug_infrun)
{
fprintf_unfiltered (gdb_stdlog, "infrun: stop_pc = 0x%s\n",
paddr_nz (stop_pc));
if (target_stopped_by_watchpoint ())
{
CORE_ADDR addr;
fprintf_unfiltered (gdb_stdlog, "infrun: stopped by watchpoint\n");
if (target_stopped_data_address (&current_target, &addr))
fprintf_unfiltered (gdb_stdlog,
"infrun: stopped data address = 0x%s\n",
paddr_nz (addr));
else
fprintf_unfiltered (gdb_stdlog,
"infrun: (no data address available)\n");
}
}
if (stepping_past_singlestep_breakpoint)
{
gdb_assert (singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
stepping_past_singlestep_breakpoint = 0;
/* We've either finished single-stepping past the single-step
breakpoint, or stopped for some other reason. It would be nice if
we could tell, but we can't reliably. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping_past_singlestep_breakpoint\n");
/* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
ecs->random_signal = 0;
context_switch (saved_singlestep_ptid);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
resume (1, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
}
if (!ptid_equal (deferred_step_ptid, null_ptid))
{
/* In non-stop mode, there's never a deferred_step_ptid set. */
gdb_assert (!non_stop);
/* If we stopped for some other reason than single-stepping, ignore
the fact that we were supposed to switch back. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: handling deferred step\n");
/* Pull the single step breakpoints out of the target. */
if (singlestep_breakpoints_inserted_p)
{
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
/* Note: We do not call context_switch at this point, as the
context is already set up for stepping the original thread. */
switch_to_thread (deferred_step_ptid);
deferred_step_ptid = null_ptid;
/* Suppress spurious "Switching to ..." message. */
previous_inferior_ptid = inferior_ptid;
resume (1, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
}
deferred_step_ptid = null_ptid;
}
/* See if a thread hit a thread-specific breakpoint that was meant for
another thread. If so, then step that thread past the breakpoint,
and continue it. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
{
int thread_hop_needed = 0;
/* Check if a regular breakpoint has been hit before checking
for a potential single step breakpoint. Otherwise, GDB will
not see this breakpoint hit when stepping onto breakpoints. */
if (regular_breakpoint_inserted_here_p (stop_pc))
{
ecs->random_signal = 0;
if (!breakpoint_thread_match (stop_pc, ecs->ptid))
thread_hop_needed = 1;
}
else if (singlestep_breakpoints_inserted_p)
{
/* We have not context switched yet, so this should be true
no matter which thread hit the singlestep breakpoint. */
gdb_assert (ptid_equal (inferior_ptid, singlestep_ptid));
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: software single step "
"trap for %s\n",
target_pid_to_str (ecs->ptid));
ecs->random_signal = 0;
/* The call to in_thread_list is necessary because PTIDs sometimes
change when we go from single-threaded to multi-threaded. If
the singlestep_ptid is still in the list, assume that it is
really different from ecs->ptid. */
if (!ptid_equal (singlestep_ptid, ecs->ptid)
&& in_thread_list (singlestep_ptid))
{
/* If the PC of the thread we were trying to single-step
has changed, discard this event (which we were going
to ignore anyway), and pretend we saw that thread
trap. This prevents us continuously moving the
single-step breakpoint forward, one instruction at a
time. If the PC has changed, then the thread we were
trying to single-step has trapped or been signalled,
but the event has not been reported to GDB yet.
There might be some cases where this loses signal
information, if a signal has arrived at exactly the
same time that the PC changed, but this is the best
we can do with the information available. Perhaps we
should arrange to report all events for all threads
when they stop, or to re-poll the remote looking for
this particular thread (i.e. temporarily enable
schedlock). */
CORE_ADDR new_singlestep_pc
= regcache_read_pc (get_thread_regcache (singlestep_ptid));
if (new_singlestep_pc != singlestep_pc)
{
enum target_signal stop_signal;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: unexpected thread,"
" but expected thread advanced also\n");
/* The current context still belongs to
singlestep_ptid. Don't swap here, since that's
the context we want to use. Just fudge our
state and continue. */
stop_signal = ecs->event_thread->stop_signal;
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
ecs->ptid = singlestep_ptid;
ecs->event_thread = find_thread_ptid (ecs->ptid);
ecs->event_thread->stop_signal = stop_signal;
stop_pc = new_singlestep_pc;
}
else
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: unexpected thread\n");
thread_hop_needed = 1;
stepping_past_singlestep_breakpoint = 1;
saved_singlestep_ptid = singlestep_ptid;
}
}
}
if (thread_hop_needed)
{
int remove_status = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: thread_hop_needed\n");
/* Switch context before touching inferior memory, the
previous thread may have exited. */
if (!ptid_equal (inferior_ptid, ecs->ptid))
context_switch (ecs->ptid);
/* Saw a breakpoint, but it was hit by the wrong thread.
Just continue. */
if (singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
/* If the arch can displace step, don't remove the
breakpoints. */
if (!use_displaced_stepping (current_gdbarch))
remove_status = remove_breakpoints ();
/* Did we fail to remove breakpoints? If so, try
to set the PC past the bp. (There's at least
one situation in which we can fail to remove
the bp's: On HP-UX's that use ttrace, we can't
change the address space of a vforking child
process until the child exits (well, okay, not
then either :-) or execs. */
if (remove_status != 0)
error (_("Cannot step over breakpoint hit in wrong thread"));
else
{ /* Single step */
if (!non_stop)
{
/* Only need to require the next event from this
thread in all-stop mode. */
waiton_ptid = ecs->ptid;
infwait_state = infwait_thread_hop_state;
}
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
registers_changed ();
return;
}
}
else if (singlestep_breakpoints_inserted_p)
{
sw_single_step_trap_p = 1;
ecs->random_signal = 0;
}
}
else
ecs->random_signal = 1;
/* See if something interesting happened to the non-current thread. If
so, then switch to that thread. */
if (!ptid_equal (ecs->ptid, inferior_ptid))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: context switch\n");
context_switch (ecs->ptid);
if (deprecated_context_hook)
deprecated_context_hook (pid_to_thread_id (ecs->ptid));
}
if (singlestep_breakpoints_inserted_p)
{
/* Pull the single step breakpoints out of the target. */
remove_single_step_breakpoints ();
singlestep_breakpoints_inserted_p = 0;
}
if (stepped_after_stopped_by_watchpoint)
stopped_by_watchpoint = 0;
else
stopped_by_watchpoint = watchpoints_triggered (&ecs->ws);
/* If necessary, step over this watchpoint. We'll be back to display
it in a moment. */
if (stopped_by_watchpoint
&& (target_have_steppable_watchpoint
|| gdbarch_have_nonsteppable_watchpoint (current_gdbarch)))
{
/* At this point, we are stopped at an instruction which has
attempted to write to a piece of memory under control of
a watchpoint. The instruction hasn't actually executed
yet. If we were to evaluate the watchpoint expression
now, we would get the old value, and therefore no change
would seem to have occurred.
In order to make watchpoints work `right', we really need
to complete the memory write, and then evaluate the
watchpoint expression. We do this by single-stepping the
target.
It may not be necessary to disable the watchpoint to stop over
it. For example, the PA can (with some kernel cooperation)
single step over a watchpoint without disabling the watchpoint.
It is far more common to need to disable a watchpoint to step
the inferior over it. If we have non-steppable watchpoints,
we must disable the current watchpoint; it's simplest to
disable all watchpoints and breakpoints. */
int hw_step = 1;
if (!target_have_steppable_watchpoint)
remove_breakpoints ();
/* Single step */
hw_step = maybe_software_singlestep (current_gdbarch, stop_pc);
target_resume (ecs->ptid, hw_step, TARGET_SIGNAL_0);
registers_changed ();
waiton_ptid = ecs->ptid;
if (target_have_steppable_watchpoint)
infwait_state = infwait_step_watch_state;
else
infwait_state = infwait_nonstep_watch_state;
prepare_to_wait (ecs);
return;
}
ecs->stop_func_start = 0;
ecs->stop_func_end = 0;
ecs->stop_func_name = 0;
/* Don't care about return value; stop_func_start and stop_func_name
will both be 0 if it doesn't work. */
find_pc_partial_function (stop_pc, &ecs->stop_func_name,
&ecs->stop_func_start, &ecs->stop_func_end);
ecs->stop_func_start
+= gdbarch_deprecated_function_start_offset (current_gdbarch);
ecs->event_thread->stepping_over_breakpoint = 0;
bpstat_clear (&ecs->event_thread->stop_bpstat);
ecs->event_thread->stop_step = 0;
stop_print_frame = 1;
ecs->random_signal = 0;
stopped_by_random_signal = 0;
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
&& ecs->event_thread->trap_expected
&& gdbarch_single_step_through_delay_p (current_gdbarch)
&& currently_stepping (ecs->event_thread))
{
/* We're trying to step off a breakpoint. Turns out that we're
also on an instruction that needs to be stepped multiple
times before it's been fully executing. E.g., architectures
with a delay slot. It needs to be stepped twice, once for
the instruction and once for the delay slot. */
int step_through_delay
= gdbarch_single_step_through_delay (current_gdbarch,
get_current_frame ());
if (debug_infrun && step_through_delay)
fprintf_unfiltered (gdb_stdlog, "infrun: step through delay\n");
if (ecs->event_thread->step_range_end == 0 && step_through_delay)
{
/* The user issued a continue when stopped at a breakpoint.
Set up for another trap and get out of here. */
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
else if (step_through_delay)
{
/* The user issued a step when stopped at a breakpoint.
Maybe we should stop, maybe we should not - the delay
slot *might* correspond to a line of source. In any
case, don't decide that here, just set
ecs->stepping_over_breakpoint, making sure we
single-step again before breakpoints are re-inserted. */
ecs->event_thread->stepping_over_breakpoint = 1;
}
}
/* Look at the cause of the stop, and decide what to do.
The alternatives are:
1) stop_stepping and return; to really stop and return to the debugger,
2) keep_going and return to start up again
(set ecs->event_thread->stepping_over_breakpoint to 1 to single step once)
3) set ecs->random_signal to 1, and the decision between 1 and 2
will be made according to the signal handling tables. */
/* First, distinguish signals caused by the debugger from signals
that have to do with the program's own actions. Note that
breakpoint insns may cause SIGTRAP or SIGILL or SIGEMT, depending
on the operating system version. Here we detect when a SIGILL or
SIGEMT is really a breakpoint and change it to SIGTRAP. We do
something similar for SIGSEGV, since a SIGSEGV will be generated
when we're trying to execute a breakpoint instruction on a
non-executable stack. This happens for call dummy breakpoints
for architectures like SPARC that place call dummies on the
stack.
If we're doing a displaced step past a breakpoint, then the
breakpoint is always inserted at the original instruction;
non-standard signals can't be explained by the breakpoint. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
|| (! ecs->event_thread->trap_expected
&& breakpoint_inserted_here_p (stop_pc)
&& (ecs->event_thread->stop_signal == TARGET_SIGNAL_ILL
|| ecs->event_thread->stop_signal == TARGET_SIGNAL_SEGV
|| ecs->event_thread->stop_signal == TARGET_SIGNAL_EMT))
|| stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP
|| stop_soon == STOP_QUIETLY_REMOTE)
{
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stopped\n");
stop_print_frame = 0;
stop_stepping (ecs);
return;
}
/* This is originated from start_remote(), start_inferior() and
shared libraries hook functions. */
if (stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_REMOTE)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: quietly stopped\n");
stop_stepping (ecs);
return;
}
/* This originates from attach_command(). We need to overwrite
the stop_signal here, because some kernels don't ignore a
SIGSTOP in a subsequent ptrace(PTRACE_CONT,SIGSTOP) call.
See more comments in inferior.h. On the other hand, if we
get a non-SIGSTOP, report it to the user - assume the backend
will handle the SIGSTOP if it should show up later.
Also consider that the attach is complete when we see a
SIGTRAP. Some systems (e.g. Windows), and stubs supporting
target extended-remote report it instead of a SIGSTOP
(e.g. gdbserver). We already rely on SIGTRAP being our
signal, so this is no exception.
Also consider that the attach is complete when we see a
TARGET_SIGNAL_0. In non-stop mode, GDB will explicitly tell
the target to stop all threads of the inferior, in case the
low level attach operation doesn't stop them implicitly. If
they weren't stopped implicitly, then the stub will report a
TARGET_SIGNAL_0, meaning: stopped for no particular reason
other than GDB's request. */
if (stop_soon == STOP_QUIETLY_NO_SIGSTOP
&& (ecs->event_thread->stop_signal == TARGET_SIGNAL_STOP
|| ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
|| ecs->event_thread->stop_signal == TARGET_SIGNAL_0))
{
stop_stepping (ecs);
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
return;
}
/* See if there is a breakpoint at the current PC. */
ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid);
/* Following in case break condition called a
function. */
stop_print_frame = 1;
/* NOTE: cagney/2003-03-29: These two checks for a random signal
at one stage in the past included checks for an inferior
function call's call dummy's return breakpoint. The original
comment, that went with the test, read:
``End of a stack dummy. Some systems (e.g. Sony news) give
another signal besides SIGTRAP, so check here as well as
above.''
If someone ever tries to get call dummys on a
non-executable stack to work (where the target would stop
with something like a SIGSEGV), then those tests might need
to be re-instated. Given, however, that the tests were only
enabled when momentary breakpoints were not being used, I
suspect that it won't be the case.
NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
be necessary for call dummies on a non-executable stack on
SPARC. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
= !(bpstat_explains_signal (ecs->event_thread->stop_bpstat)
|| ecs->event_thread->trap_expected
|| (ecs->event_thread->step_range_end
&& ecs->event_thread->step_resume_breakpoint == NULL));
else
{
ecs->random_signal = !bpstat_explains_signal (ecs->event_thread->stop_bpstat);
if (!ecs->random_signal)
ecs->event_thread->stop_signal = TARGET_SIGNAL_TRAP;
}
}
/* When we reach this point, we've pretty much decided
that the reason for stopping must've been a random
(unexpected) signal. */
else
ecs->random_signal = 1;
process_event_stop_test:
/* For the program's own signals, act according to
the signal handling tables. */
if (ecs->random_signal)
{
/* Signal not for debugging purposes. */
int printed = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: random signal %d\n",
ecs->event_thread->stop_signal);
stopped_by_random_signal = 1;
if (signal_print[ecs->event_thread->stop_signal])
{
printed = 1;
target_terminal_ours_for_output ();
print_stop_reason (SIGNAL_RECEIVED, ecs->event_thread->stop_signal);
}
/* Always stop on signals if we're either just gaining control
of the program, or the user explicitly requested this thread
to remain stopped. */
if (stop_soon != NO_STOP_QUIETLY
|| ecs->event_thread->stop_requested
|| signal_stop_state (ecs->event_thread->stop_signal))
{
stop_stepping (ecs);
return;
}
/* If not going to stop, give terminal back
if we took it away. */
else if (printed)
target_terminal_inferior ();
/* Clear the signal if it should not be passed. */
if (signal_program[ecs->event_thread->stop_signal] == 0)
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
if (ecs->event_thread->prev_pc == stop_pc
&& ecs->event_thread->trap_expected
&& ecs->event_thread->step_resume_breakpoint == NULL)
{
/* We were just starting a new sequence, attempting to
single-step off of a breakpoint and expecting a SIGTRAP.
Instead this signal arrives. This signal will take us out
of the stepping range so GDB needs to remember to, when
the signal handler returns, resume stepping off that
breakpoint. */
/* To simplify things, "continue" is forced to use the same
code paths as single-step - set a breakpoint at the
signal return address and then, once hit, step off that
breakpoint. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: signal arrived while stepping over "
"breakpoint\n");
insert_step_resume_breakpoint_at_frame (get_current_frame ());
ecs->event_thread->step_after_step_resume_breakpoint = 1;
keep_going (ecs);
return;
}
if (ecs->event_thread->step_range_end != 0
&& ecs->event_thread->stop_signal != TARGET_SIGNAL_0
&& (ecs->event_thread->step_range_start <= stop_pc
&& stop_pc < ecs->event_thread->step_range_end)
&& frame_id_eq (get_frame_id (get_current_frame ()),
ecs->event_thread->step_frame_id)
&& ecs->event_thread->step_resume_breakpoint == NULL)
{
/* The inferior is about to take a signal that will take it
out of the single step range. Set a breakpoint at the
current PC (which is presumably where the signal handler
will eventually return) and then allow the inferior to
run free.
Note that this is only needed for a signal delivered
while in the single-step range. Nested signals aren't a
problem as they eventually all return. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: signal may take us out of "
"single-step range\n");
insert_step_resume_breakpoint_at_frame (get_current_frame ());
keep_going (ecs);
return;
}
/* Note: step_resume_breakpoint may be non-NULL. This occures
when either there's a nested signal, or when there's a
pending signal enabled just as the signal handler returns
(leaving the inferior at the step-resume-breakpoint without
actually executing it). Either way continue until the
breakpoint is really hit. */
keep_going (ecs);
return;
}
/* Handle cases caused by hitting a breakpoint. */
{
CORE_ADDR jmp_buf_pc;
struct bpstat_what what;
what = bpstat_what (ecs->event_thread->stop_bpstat);
if (what.call_dummy)
{
stop_stack_dummy = 1;
}
switch (what.main_action)
{
case BPSTAT_WHAT_SET_LONGJMP_RESUME:
/* If we hit the breakpoint at longjmp while stepping, we
install a momentary breakpoint at the target of the
jmp_buf. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
ecs->event_thread->stepping_over_breakpoint = 1;
if (!gdbarch_get_longjmp_target_p (current_gdbarch)
|| !gdbarch_get_longjmp_target (current_gdbarch,
get_current_frame (), &jmp_buf_pc))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "\
infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME (!gdbarch_get_longjmp_target)\n");
keep_going (ecs);
return;
}
/* We're going to replace the current step-resume breakpoint
with a longjmp-resume breakpoint. */
delete_step_resume_breakpoint (ecs->event_thread);
/* Insert a breakpoint at resume address. */
insert_longjmp_resume_breakpoint (jmp_buf_pc);
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
gdb_assert (ecs->event_thread->step_resume_breakpoint != NULL);
delete_step_resume_breakpoint (ecs->event_thread);
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
case BPSTAT_WHAT_SINGLE:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
ecs->event_thread->stepping_over_breakpoint = 1;
/* Still need to check other stuff, at least the case
where we are stepping and step out of the right range. */
break;
case BPSTAT_WHAT_STOP_NOISY:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
stop_print_frame = 1;
/* We are about to nuke the step_resume_breakpointt via the
cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
case BPSTAT_WHAT_STOP_SILENT:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
stop_print_frame = 0;
/* We are about to nuke the step_resume_breakpoin via the
cleanup chain, so no need to worry about it here. */
stop_stepping (ecs);
return;
case BPSTAT_WHAT_STEP_RESUME:
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
delete_step_resume_breakpoint (ecs->event_thread);
if (ecs->event_thread->step_after_step_resume_breakpoint)
{
/* Back when the step-resume breakpoint was inserted, we
were trying to single-step off a breakpoint. Go back
to doing that. */
ecs->event_thread->step_after_step_resume_breakpoint = 0;
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
if (stop_pc == ecs->stop_func_start
&& execution_direction == EXEC_REVERSE)
{
/* We are stepping over a function call in reverse, and
just hit the step-resume breakpoint at the start
address of the function. Go back to single-stepping,
which should take us back to the function call. */
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
break;
case BPSTAT_WHAT_CHECK_SHLIBS:
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_CHECK_SHLIBS\n");
/* Check for any newly added shared libraries if we're
supposed to be adding them automatically. Switch
terminal for any messages produced by
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
stack's section table is kept up-to-date. Architectures,
(e.g., PPC64), use the section table to perform
operations such as address => section name and hence
require the table to contain all sections (including
those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
exec_ops to SOLIB_ADD. This is because current GDB is
only tooled to propagate section_table changes out from
the "current_target" (see target_resize_to_sections), and
not up from the exec stratum. This, of course, isn't
right. "infrun.c" should only interact with the
exec/process stratum, instead relying on the target stack
to propagate relevant changes (stop, section table
changed, ...) up to other layers. */
#ifdef SOLIB_ADD
SOLIB_ADD (NULL, 0, &current_target, auto_solib_add);
#else
solib_add (NULL, 0, &current_target, auto_solib_add);
#endif
target_terminal_inferior ();
/* If requested, stop when the dynamic linker notifies
gdb of events. This allows the user to get control
and place breakpoints in initializer routines for
dynamically loaded objects (among other things). */
if (stop_on_solib_events || stop_stack_dummy)
{
stop_stepping (ecs);
return;
}
else
{
/* We want to step over this breakpoint, then keep going. */
ecs->event_thread->stepping_over_breakpoint = 1;
break;
}
}
break;
case BPSTAT_WHAT_LAST:
/* Not a real code, but listed here to shut up gcc -Wall. */
case BPSTAT_WHAT_KEEP_CHECKING:
break;
}
}
/* We come here if we hit a breakpoint but should not
stop for it. Possibly we also were stepping
and should stop for that. So fall through and
test for stepping. But, if not stepping,
do not stop. */
/* In all-stop mode, if we're currently stepping but have stopped in
some other thread, we need to switch back to the stepped thread. */
if (!non_stop)
{
struct thread_info *tp;
tp = iterate_over_threads (currently_stepping_or_nexting_callback,
ecs->event_thread);
if (tp)
{
/* However, if the current thread is blocked on some internal
breakpoint, and we simply need to step over that breakpoint
to get it going again, do that first. */
if ((ecs->event_thread->trap_expected
&& ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
|| ecs->event_thread->stepping_over_breakpoint)
{
keep_going (ecs);
return;
}
/* If the stepping thread exited, then don't try reverting
back to it, just keep going. We need to query the target
in case it doesn't support thread exit events. */
if (is_exited (tp->ptid)
|| !target_thread_alive (tp->ptid))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "\
infrun: not switching back to stepped thread, it has vanished\n");
delete_thread (tp->ptid);
keep_going (ecs);
return;
}
/* Otherwise, we no longer expect a trap in the current thread.
Clear the trap_expected flag before switching back -- this is
what keep_going would do as well, if we called it. */
ecs->event_thread->trap_expected = 0;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: switching back to stepped thread\n");
ecs->event_thread = tp;
ecs->ptid = tp->ptid;
context_switch (ecs->ptid);
keep_going (ecs);
return;
}
}
/* Are we stepping to get the inferior out of the dynamic linker's
hook (and possibly the dld itself) after catching a shlib
event? */
if (ecs->event_thread->stepping_through_solib_after_catch)
{
#if defined(SOLIB_ADD)
/* Have we reached our destination? If not, keep going. */
if (SOLIB_IN_DYNAMIC_LINKER (PIDGET (ecs->ptid), stop_pc))
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping in dynamic linker\n");
ecs->event_thread->stepping_over_breakpoint = 1;
keep_going (ecs);
return;
}
#endif
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: step past dynamic linker\n");
/* Else, stop and report the catchpoint(s) whose triggering
caused us to begin stepping. */
ecs->event_thread->stepping_through_solib_after_catch = 0;
bpstat_clear (&ecs->event_thread->stop_bpstat);
ecs->event_thread->stop_bpstat
= bpstat_copy (ecs->event_thread->stepping_through_solib_catchpoints);
bpstat_clear (&ecs->event_thread->stepping_through_solib_catchpoints);
stop_print_frame = 1;
stop_stepping (ecs);
return;
}
if (ecs->event_thread->step_resume_breakpoint)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: step-resume breakpoint is inserted\n");
/* Having a step-resume breakpoint overrides anything
else having to do with stepping commands until
that breakpoint is reached. */
keep_going (ecs);
return;
}
if (ecs->event_thread->step_range_end == 0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no stepping, continue\n");
/* Likewise if we aren't even stepping. */
keep_going (ecs);
return;
}
/* If stepping through a line, keep going if still within it.
Note that step_range_end is the address of the first instruction
beyond the step range, and NOT the address of the last instruction
within it! */
if (stop_pc >= ecs->event_thread->step_range_start
&& stop_pc < ecs->event_thread->step_range_end)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepping inside range [0x%s-0x%s]\n",
paddr_nz (ecs->event_thread->step_range_start),
paddr_nz (ecs->event_thread->step_range_end));
/* When stepping backward, stop at beginning of line range
(unless it's the function entry point, in which case
keep going back to the call point). */
if (stop_pc == ecs->event_thread->step_range_start
&& stop_pc != ecs->stop_func_start
&& execution_direction == EXEC_REVERSE)
{
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
}
else
keep_going (ecs);
return;
}
/* We stepped out of the stepping range. */
/* If we are stepping at the source level and entered the runtime
loader dynamic symbol resolution code, we keep on single stepping
until we exit the run time loader code and reach the callee's
address. */
if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
&& in_solib_dynsym_resolve_code (stop_pc))
{
CORE_ADDR pc_after_resolver =
gdbarch_skip_solib_resolver (current_gdbarch, stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into dynsym resolve code\n");
if (pc_after_resolver)
{
/* Set up a step-resume breakpoint at the address
indicated by SKIP_SOLIB_RESOLVER. */
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
sr_sal.pc = pc_after_resolver;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
keep_going (ecs);
return;
}
if (ecs->event_thread->step_range_end != 1
&& (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
|| ecs->event_thread->step_over_calls == STEP_OVER_ALL)
&& get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into signal trampoline\n");
/* The inferior, while doing a "step" or "next", has ended up in
a signal trampoline (either by a signal being delivered or by
the signal handler returning). Just single-step until the
inferior leaves the trampoline (either by calling the handler
or returning). */
keep_going (ecs);
return;
}
/* Check for subroutine calls. The check for the current frame
equalling the step ID is not necessary - the check of the
previous frame's ID is sufficient - but it is a common case and
cheaper than checking the previous frame's ID.
NOTE: frame_id_eq will never report two invalid frame IDs as
being equal, so to get into this block, both the current and
previous frame must have valid frame IDs. */
if (!frame_id_eq (get_frame_id (get_current_frame ()),
ecs->event_thread->step_frame_id)
&& (frame_id_eq (frame_unwind_id (get_current_frame ()),
ecs->event_thread->step_frame_id)
|| execution_direction == EXEC_REVERSE))
{
CORE_ADDR real_stop_pc;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into subroutine\n");
if ((ecs->event_thread->step_over_calls == STEP_OVER_NONE)
|| ((ecs->event_thread->step_range_end == 1)
&& in_prologue (ecs->event_thread->prev_pc,
ecs->stop_func_start)))
{
/* I presume that step_over_calls is only 0 when we're
supposed to be stepping at the assembly language level
("stepi"). Just stop. */
/* Also, maybe we just did a "nexti" inside a prolog, so we
thought it was a subroutine call but it was not. Stop as
well. FENN */
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
if (ecs->event_thread->step_over_calls == STEP_OVER_ALL)
{
/* We're doing a "next".
Normal (forward) execution: set a breakpoint at the
callee's return address (the address at which the caller
will resume).
Reverse (backward) execution. set the step-resume
breakpoint at the start of the function that we just
stepped into (backwards), and continue to there. When we
get there, we'll need to single-step back to the caller. */
if (execution_direction == EXEC_REVERSE)
{
struct symtab_and_line sr_sal;
if (ecs->stop_func_start == 0
&& in_solib_dynsym_resolve_code (stop_pc))
{
/* Stepped into runtime loader dynamic symbol
resolution code. Since we're in reverse,
we have already backed up through the runtime
loader and the dynamic function. This is just
the trampoline (jump table).
Just keep stepping, we'll soon be home.
*/
keep_going (ecs);
return;
}
/* Normal (staticly linked) function call return. */
init_sal (&sr_sal);
sr_sal.pc = ecs->stop_func_start;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
else
insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
/* If we are in a function call trampoline (a stub between the
calling routine and the real function), locate the real
function. That's what tells us (a) whether we want to step
into it at all, and (b) what prologue we want to run to the
end of, if we do step into it. */
real_stop_pc = skip_language_trampoline (get_current_frame (), stop_pc);
if (real_stop_pc == 0)
real_stop_pc = gdbarch_skip_trampoline_code
(current_gdbarch, get_current_frame (), stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
if (real_stop_pc != 0 && in_solib_dynsym_resolve_code (real_stop_pc))
{
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
sr_sal.pc = ecs->stop_func_start;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
keep_going (ecs);
return;
}
/* If we have line number information for the function we are
thinking of stepping into, step into it.
If there are several symtabs at that PC (e.g. with include
files), just want to know whether *any* of them have line
numbers. find_pc_line handles this. */
{
struct symtab_and_line tmp_sal;
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0)
{
if (execution_direction == EXEC_REVERSE)
handle_step_into_function_backward (ecs);
else
handle_step_into_function (ecs);
return;
}
}
/* If we have no line number and the step-stop-if-no-debug is
set, we stop the step so that the user has a chance to switch
in assembly mode. */
if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
&& step_stop_if_no_debug)
{
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
if (execution_direction == EXEC_REVERSE)
{
/* Set a breakpoint at callee's start address.
From there we can step once and be back in the caller. */
struct symtab_and_line sr_sal;
init_sal (&sr_sal);
sr_sal.pc = ecs->stop_func_start;
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
}
else
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
/* If we're in the return path from a shared library trampoline,
we want to proceed through the trampoline when stepping. */
if (gdbarch_in_solib_return_trampoline (current_gdbarch,
stop_pc, ecs->stop_func_name))
{
/* Determine where this trampoline returns. */
CORE_ADDR real_stop_pc;
real_stop_pc = gdbarch_skip_trampoline_code
(current_gdbarch, get_current_frame (), stop_pc);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into solib return tramp\n");
/* Only proceed through if we know where it's going. */
if (real_stop_pc)
{
/* And put the step-breakpoint there and go until there. */
struct symtab_and_line sr_sal;
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = real_stop_pc;
sr_sal.section = find_pc_overlay (sr_sal.pc);
/* Do not specify what the fp should be when we stop since
on some machines the prologue is where the new fp value
is established. */
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* Restart without fiddling with the step ranges or
other state. */
keep_going (ecs);
return;
}
}
stop_pc_sal = find_pc_line (stop_pc, 0);
/* NOTE: tausq/2004-05-24: This if block used to be done before all
the trampoline processing logic, however, there are some trampolines
that have no names, so we should do trampoline handling first. */
if (ecs->event_thread->step_over_calls == STEP_OVER_UNDEBUGGABLE
&& ecs->stop_func_name == NULL
&& stop_pc_sal.line == 0)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped into undebuggable function\n");
/* The inferior just stepped into, or returned to, an
undebuggable function (where there is no debugging information
and no line number corresponding to the address where the
inferior stopped). Since we want to skip this kind of code,
we keep going until the inferior returns from this
function - unless the user has asked us not to (via
set step-mode) or we no longer know how to get back
to the call site. */
if (step_stop_if_no_debug
|| !frame_id_p (frame_unwind_id (get_current_frame ())))
{
/* If we have no line number and the step-stop-if-no-debug
is set, we stop the step so that the user has a chance to
switch in assembly mode. */
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
else
{
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
insert_step_resume_breakpoint_at_caller (get_current_frame ());
keep_going (ecs);
return;
}
}
if (ecs->event_thread->step_range_end == 1)
{
/* It is stepi or nexti. We always want to stop stepping after
one instruction. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepi/nexti\n");
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
if (stop_pc_sal.line == 0)
{
/* We have no line number information. That means to stop
stepping (does this always happen right after one instruction,
when we do "s" in a function with no line numbers,
or can this happen as a result of a return or longjmp?). */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: no line number info\n");
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
if ((stop_pc == stop_pc_sal.pc)
&& (ecs->event_thread->current_line != stop_pc_sal.line
|| ecs->event_thread->current_symtab != stop_pc_sal.symtab))
{
/* We are at the start of a different line. So stop. Note that
we don't stop if we step into the middle of a different line.
That is said to make things like for (;;) statements work
better. */
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stepped to a different line\n");
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
/* We aren't done stepping.
Optimize by setting the stepping range to the line.
(We might not be in the original line, but if we entered a
new line in mid-statement, we continue stepping. This makes
things like for(;;) statements work better.) */
ecs->event_thread->step_range_start = stop_pc_sal.pc;
ecs->event_thread->step_range_end = stop_pc_sal.end;
ecs->event_thread->step_frame_id = get_frame_id (get_current_frame ());
ecs->event_thread->current_line = stop_pc_sal.line;
ecs->event_thread->current_symtab = stop_pc_sal.symtab;
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: keep going\n");
keep_going (ecs);
}
/* Is thread TP in the middle of single-stepping? */
static int
currently_stepping (struct thread_info *tp)
{
return ((tp->step_range_end && tp->step_resume_breakpoint == NULL)
|| tp->trap_expected
|| tp->stepping_through_solib_after_catch
|| bpstat_should_step ());
}
/* Returns true if any thread *but* the one passed in "data" is in the
middle of stepping or of handling a "next". */
static int
currently_stepping_or_nexting_callback (struct thread_info *tp, void *data)
{
if (tp == data)
return 0;
return (tp->step_range_end
|| tp->trap_expected
|| tp->stepping_through_solib_after_catch);
}
/* Inferior has stepped into a subroutine call with source code that
we should not step over. Do step to the first line of code in
it. */
static void
handle_step_into_function (struct execution_control_state *ecs)
{
struct symtab *s;
struct symtab_and_line stop_func_sal, sr_sal;
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch,
ecs->stop_func_start);
stop_func_sal = find_pc_line (ecs->stop_func_start, 0);
/* Use the step_resume_break to step until the end of the prologue,
even if that involves jumps (as it seems to on the vax under
4.2). */
/* If the prologue ends in the middle of a source line, continue to
the end of that source line (if it is still within the function).
Otherwise, just go to end of prologue. */
if (stop_func_sal.end
&& stop_func_sal.pc != ecs->stop_func_start
&& stop_func_sal.end < ecs->stop_func_end)
ecs->stop_func_start = stop_func_sal.end;
/* Architectures which require breakpoint adjustment might not be able
to place a breakpoint at the computed address. If so, the test
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
ecs->stop_func_start to an address at which a breakpoint may be
legitimately placed.
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
made, GDB will enter an infinite loop when stepping through
optimized code consisting of VLIW instructions which contain
subinstructions corresponding to different source lines. On
FR-V, it's not permitted to place a breakpoint on any but the
first subinstruction of a VLIW instruction. When a breakpoint is
set, GDB will adjust the breakpoint address to the beginning of
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
{
ecs->stop_func_start
= gdbarch_adjust_breakpoint_address (current_gdbarch,
ecs->stop_func_start);
}
if (ecs->stop_func_start == stop_pc)
{
/* We are already there: stop now. */
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
return;
}
else
{
/* Put the step-breakpoint there and go until there. */
init_sal (&sr_sal); /* initialize to zeroes */
sr_sal.pc = ecs->stop_func_start;
sr_sal.section = find_pc_overlay (ecs->stop_func_start);
/* Do not specify what the fp should be when we stop since on
some machines the prologue is where the new fp value is
established. */
insert_step_resume_breakpoint_at_sal (sr_sal, null_frame_id);
/* And make sure stepping stops right away then. */
ecs->event_thread->step_range_end = ecs->event_thread->step_range_start;
}
keep_going (ecs);
}
/* Inferior has stepped backward into a subroutine call with source
code that we should not step over. Do step to the beginning of the
last line of code in it. */
static void
handle_step_into_function_backward (struct execution_control_state *ecs)
{
struct symtab *s;
struct symtab_and_line stop_func_sal, sr_sal;
s = find_pc_symtab (stop_pc);
if (s && s->language != language_asm)
ecs->stop_func_start = gdbarch_skip_prologue (current_gdbarch,
ecs->stop_func_start);
stop_func_sal = find_pc_line (stop_pc, 0);
/* OK, we're just going to keep stepping here. */
if (stop_func_sal.pc == stop_pc)
{
/* We're there already. Just stop stepping now. */
ecs->event_thread->stop_step = 1;
print_stop_reason (END_STEPPING_RANGE, 0);
stop_stepping (ecs);
}
else
{
/* Else just reset the step range and keep going.
No step-resume breakpoint, they don't work for
epilogues, which can have multiple entry paths. */
ecs->event_thread->step_range_start = stop_func_sal.pc;
ecs->event_thread->step_range_end = stop_func_sal.end;
keep_going (ecs);
}
return;
}
/* Insert a "step-resume breakpoint" at SR_SAL with frame ID SR_ID.
This is used to both functions and to skip over code. */
static void
insert_step_resume_breakpoint_at_sal (struct symtab_and_line sr_sal,
struct frame_id sr_id)
{
/* There should never be more than one step-resume or longjmp-resume
breakpoint per thread, so we should never be setting a new
step_resume_breakpoint when one is already active. */
gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting step-resume breakpoint at 0x%s\n",
paddr_nz (sr_sal.pc));
inferior_thread ()->step_resume_breakpoint
= set_momentary_breakpoint (sr_sal, sr_id, bp_step_resume);
}
/* Insert a "step-resume breakpoint" at RETURN_FRAME.pc. This is used
to skip a potential signal handler.
This is called with the interrupted function's frame. The signal
handler, when it returns, will resume the interrupted function at
RETURN_FRAME.pc. */
static void
insert_step_resume_breakpoint_at_frame (struct frame_info *return_frame)
{
struct symtab_and_line sr_sal;
gdb_assert (return_frame != NULL);
init_sal (&sr_sal); /* initialize to zeros */
sr_sal.pc = gdbarch_addr_bits_remove
(current_gdbarch, get_frame_pc (return_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, get_frame_id (return_frame));
}
/* Similar to insert_step_resume_breakpoint_at_frame, except
but a breakpoint at the previous frame's PC. This is used to
skip a function after stepping into it (for "next" or if the called
function has no debugging information).
The current function has almost always been reached by single
stepping a call or return instruction. NEXT_FRAME belongs to the
current function, and the breakpoint will be set at the caller's
resume address.
This is a separate function rather than reusing
insert_step_resume_breakpoint_at_frame in order to avoid
get_prev_frame, which may stop prematurely (see the implementation
of frame_unwind_id for an example). */
static void
insert_step_resume_breakpoint_at_caller (struct frame_info *next_frame)
{
struct symtab_and_line sr_sal;
/* We shouldn't have gotten here if we don't know where the call site
is. */
gdb_assert (frame_id_p (frame_unwind_id (next_frame)));
init_sal (&sr_sal); /* initialize to zeros */
sr_sal.pc = gdbarch_addr_bits_remove
(current_gdbarch, frame_pc_unwind (next_frame));
sr_sal.section = find_pc_overlay (sr_sal.pc);
insert_step_resume_breakpoint_at_sal (sr_sal, frame_unwind_id (next_frame));
}
/* Insert a "longjmp-resume" breakpoint at PC. This is used to set a
new breakpoint at the target of a jmp_buf. The handling of
longjmp-resume uses the same mechanisms used for handling
"step-resume" breakpoints. */
static void
insert_longjmp_resume_breakpoint (CORE_ADDR pc)
{
/* There should never be more than one step-resume or longjmp-resume
breakpoint per thread, so we should never be setting a new
longjmp_resume_breakpoint when one is already active. */
gdb_assert (inferior_thread ()->step_resume_breakpoint == NULL);
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog,
"infrun: inserting longjmp-resume breakpoint at 0x%s\n",
paddr_nz (pc));
inferior_thread ()->step_resume_breakpoint =
set_momentary_breakpoint_at_pc (pc, bp_longjmp_resume);
}
static void
stop_stepping (struct execution_control_state *ecs)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: stop_stepping\n");
/* Let callers know we don't want to wait for the inferior anymore. */
ecs->wait_some_more = 0;
}
/* This function handles various cases where we need to continue
waiting for the inferior. */
/* (Used to be the keep_going: label in the old wait_for_inferior) */
static void
keep_going (struct execution_control_state *ecs)
{
/* Save the pc before execution, to compare with pc after stop. */
ecs->event_thread->prev_pc
= regcache_read_pc (get_thread_regcache (ecs->ptid));
/* If we did not do break;, it means we should keep running the
inferior and not return to debugger. */
if (ecs->event_thread->trap_expected
&& ecs->event_thread->stop_signal != TARGET_SIGNAL_TRAP)
{
/* We took a signal (which we are supposed to pass through to
the inferior, else we'd not get here) and we haven't yet
gotten our trap. Simply continue. */
resume (currently_stepping (ecs->event_thread),
ecs->event_thread->stop_signal);
}
else
{
/* Either the trap was not expected, but we are continuing
anyway (the user asked that this signal be passed to the
child)
-- or --
The signal was SIGTRAP, e.g. it was our signal, but we
decided we should resume from it.
We're going to run this baby now!
Note that insert_breakpoints won't try to re-insert
already inserted breakpoints. Therefore, we don't
care if breakpoints were already inserted, or not. */
if (ecs->event_thread->stepping_over_breakpoint)
{
if (! use_displaced_stepping (current_gdbarch))
/* Since we can't do a displaced step, we have to remove
the breakpoint while we step it. To keep things
simple, we remove them all. */
remove_breakpoints ();
}
else
{
struct gdb_exception e;
/* Stop stepping when inserting breakpoints
has failed. */
TRY_CATCH (e, RETURN_MASK_ERROR)
{
insert_breakpoints ();
}
if (e.reason < 0)
{
stop_stepping (ecs);
return;
}
}
ecs->event_thread->trap_expected = ecs->event_thread->stepping_over_breakpoint;
/* Do not deliver SIGNAL_TRAP (except when the user explicitly
specifies that such a signal should be delivered to the
target program).
Typically, this would occure when a user is debugging a
target monitor on a simulator: the target monitor sets a
breakpoint; the simulator encounters this break-point and
halts the simulation handing control to GDB; GDB, noteing
that the break-point isn't valid, returns control back to the
simulator; the simulator then delivers the hardware
equivalent of a SIGNAL_TRAP to the program being debugged. */
if (ecs->event_thread->stop_signal == TARGET_SIGNAL_TRAP
&& !signal_program[ecs->event_thread->stop_signal])
ecs->event_thread->stop_signal = TARGET_SIGNAL_0;
resume (currently_stepping (ecs->event_thread),
ecs->event_thread->stop_signal);
}
prepare_to_wait (ecs);
}
/* This function normally comes after a resume, before
handle_inferior_event exits. It takes care of any last bits of
housekeeping, and sets the all-important wait_some_more flag. */
static void
prepare_to_wait (struct execution_control_state *ecs)
{
if (debug_infrun)
fprintf_unfiltered (gdb_stdlog, "infrun: prepare_to_wait\n");
if (infwait_state == infwait_normal_state)
{
overlay_cache_invalid = 1;
/* We have to invalidate the registers BEFORE calling
target_wait because they can be loaded from the target while
in target_wait. This makes remote debugging a bit more
efficient for those targets that provide critical registers
as part of their normal status mechanism. */
registers_changed ();
waiton_ptid = pid_to_ptid (-1);
}
/* This is the old end of the while loop. Let everybody know we
want to wait for the inferior some more and get called again
soon. */
ecs->wait_some_more = 1;
}
/* Print why the inferior has stopped. We always print something when
the inferior exits, or receives a signal. The rest of the cases are
dealt with later on in normal_stop() and print_it_typical(). Ideally
there should be a call to this function from handle_inferior_event()
each time stop_stepping() is called.*/
static void
print_stop_reason (enum inferior_stop_reason stop_reason, int stop_info)
{
switch (stop_reason)
{
case END_STEPPING_RANGE:
/* We are done with a step/next/si/ni command. */
/* For now print nothing. */
/* Print a message only if not in the middle of doing a "step n"
operation for n > 1 */
if (!inferior_thread ()->step_multi
|| !inferior_thread ()->stop_step)
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason",
async_reason_lookup (EXEC_ASYNC_END_STEPPING_RANGE));
break;
case SIGNAL_EXITED:
/* The inferior was terminated by a signal. */
annotate_signalled ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason",
async_reason_lookup (EXEC_ASYNC_EXITED_SIGNALLED));
ui_out_text (uiout, "\nProgram terminated with signal ");
annotate_signal_name ();
ui_out_field_string (uiout, "signal-name",
target_signal_to_name (stop_info));
annotate_signal_name_end ();
ui_out_text (uiout, ", ");
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
target_signal_to_string (stop_info));
annotate_signal_string_end ();
ui_out_text (uiout, ".\n");
ui_out_text (uiout, "The program no longer exists.\n");
break;
case EXITED:
/* The inferior program is finished. */
annotate_exited (stop_info);
if (stop_info)
{
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string (uiout, "reason",
async_reason_lookup (EXEC_ASYNC_EXITED));
ui_out_text (uiout, "\nProgram exited with code ");
ui_out_field_fmt (uiout, "exit-code", "0%o",
(unsigned int) stop_info);
ui_out_text (uiout, ".\n");
}
else
{
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason",
async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
ui_out_text (uiout, "\nProgram exited normally.\n");
}
/* Support the --return-child-result option. */
return_child_result_value = stop_info;
break;
case SIGNAL_RECEIVED:
/* Signal received. The signal table tells us to print about
it. */
annotate_signal ();
if (stop_info == TARGET_SIGNAL_0 && !ui_out_is_mi_like_p (uiout))
{
struct thread_info *t = inferior_thread ();
ui_out_text (uiout, "\n[");
ui_out_field_string (uiout, "thread-name",
target_pid_to_str (t->ptid));
ui_out_field_fmt (uiout, "thread-id", "] #%d", t->num);
ui_out_text (uiout, " stopped");
}
else
{
ui_out_text (uiout, "\nProgram received signal ");
annotate_signal_name ();
if (ui_out_is_mi_like_p (uiout))
ui_out_field_string
(uiout, "reason", async_reason_lookup (EXEC_ASYNC_SIGNAL_RECEIVED));
ui_out_field_string (uiout, "signal-name",
target_signal_to_name (stop_info));
annotate_signal_name_end ();
ui_out_text (uiout, ", ");
annotate_signal_string ();
ui_out_field_string (uiout, "signal-meaning",
target_signal_to_string (stop_info));
annotate_signal_string_end ();
}
ui_out_text (uiout, ".\n");
break;
case NO_HISTORY:
/* Reverse execution: target ran out of history info. */
ui_out_text (uiout, "\nNo more reverse-execution history.\n");
break;
default:
internal_error (__FILE__, __LINE__,
_("print_stop_reason: unrecognized enum value"));
break;
}
}
/* Here to return control to GDB when the inferior stops for real.
Print appropriate messages, remove breakpoints, give terminal our modes.
STOP_PRINT_FRAME nonzero means print the executing frame
(pc, function, args, file, line number and line text).
BREAKPOINTS_FAILED nonzero means stop was due to error
attempting to insert breakpoints. */
void
normal_stop (void)
{
struct target_waitstatus last;
ptid_t last_ptid;
struct cleanup *old_chain = make_cleanup (null_cleanup, NULL);
get_last_target_status (&last_ptid, &last);
/* If an exception is thrown from this point on, make sure to
propagate GDB's knowledge of the executing state to the
frontend/user running state. A QUIT is an easy exception to see
here, so do this before any filtered output. */
if (target_has_execution)
{
if (!non_stop)
make_cleanup (finish_thread_state_cleanup, &minus_one_ptid);
else if (last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED)
make_cleanup (finish_thread_state_cleanup, &inferior_ptid);
}
/* In non-stop mode, we don't want GDB to switch threads behind the
user's back, to avoid races where the user is typing a command to
apply to thread x, but GDB switches to thread y before the user
finishes entering the command. */
/* As with the notification of thread events, we want to delay
notifying the user that we've switched thread context until
the inferior actually stops.
There's no point in saying anything if the inferior has exited.
Note that SIGNALLED here means "exited with a signal", not
"received a signal". */
if (!non_stop
&& !ptid_equal (previous_inferior_ptid, inferior_ptid)
&& target_has_execution
&& last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED)
{
target_terminal_ours_for_output ();
printf_filtered (_("[Switching to %s]\n"),
target_pid_to_str (inferior_ptid));
annotate_thread_changed ();
previous_inferior_ptid = inferior_ptid;
}
if (!breakpoints_always_inserted_mode () && target_has_execution)
{
if (remove_breakpoints ())
{
target_terminal_ours_for_output ();
printf_filtered (_("\
Cannot remove breakpoints because program is no longer writable.\n\
Further execution is probably impossible.\n"));
}
}
/* If an auto-display called a function and that got a signal,
delete that auto-display to avoid an infinite recursion. */
if (stopped_by_random_signal)
disable_current_display ();
/* Don't print a message if in the middle of doing a "step n"
operation for n > 1 */
if (target_has_execution
&& last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED
&& inferior_thread ()->step_multi
&& inferior_thread ()->stop_step)
goto done;
target_terminal_ours ();
/* Set the current source location. This will also happen if we
display the frame below, but the current SAL will be incorrect
during a user hook-stop function. */
if (has_stack_frames () && !stop_stack_dummy)
set_current_sal_from_frame (get_current_frame (), 1);
/* Let the user/frontend see the threads as stopped. */
do_cleanups (old_chain);
/* Look up the hook_stop and run it (CLI internally handles problem
of stop_command's pre-hook not existing). */
if (stop_command)
catch_errors (hook_stop_stub, stop_command,
"Error while running hook_stop:\n", RETURN_MASK_ALL);
if (!has_stack_frames ())
goto done;
if (last.kind == TARGET_WAITKIND_SIGNALLED
|| last.kind == TARGET_WAITKIND_EXITED)
goto done;
/* Select innermost stack frame - i.e., current frame is frame 0,
and current location is based on that.
Don't do this on return from a stack dummy routine,
or if the program has exited. */
if (!stop_stack_dummy)
{
select_frame (get_current_frame ());
/* Print current location without a level number, if
we have changed functions or hit a breakpoint.
Print source line if we have one.
bpstat_print() contains the logic deciding in detail
what to print, based on the event(s) that just occurred. */
/* If --batch-silent is enabled then there's no need to print the current
source location, and to try risks causing an error message about
missing source files. */
if (stop_print_frame && !batch_silent)
{
int bpstat_ret;
int source_flag;
int do_frame_printing = 1;
struct thread_info *tp = inferior_thread ();
bpstat_ret = bpstat_print (tp->stop_bpstat);
switch (bpstat_ret)
{
case PRINT_UNKNOWN:
/* If we had hit a shared library event breakpoint,
bpstat_print would print out this message. If we hit
an OS-level shared library event, do the same
thing. */
if (last.kind == TARGET_WAITKIND_LOADED)
{
printf_filtered (_("Stopped due to shared library event\n"));
source_flag = SRC_LINE; /* something bogus */
do_frame_printing = 0;
break;
}
/* FIXME: cagney/2002-12-01: Given that a frame ID does
(or should) carry around the function and does (or
should) use that when doing a frame comparison. */
if (tp->stop_step
&& frame_id_eq (tp->step_frame_id,
get_frame_id (get_current_frame ()))
&& step_start_function == find_pc_function (stop_pc))
source_flag = SRC_LINE; /* finished step, just print source line */
else
source_flag = SRC_AND_LOC; /* print location and source line */
break;
case PRINT_SRC_AND_LOC:
source_flag = SRC_AND_LOC; /* print location and source line */
break;
case PRINT_SRC_ONLY:
source_flag = SRC_LINE;
break;
case PRINT_NOTHING:
source_flag = SRC_LINE; /* something bogus */
do_frame_printing = 0;
break;
default:
internal_error (__FILE__, __LINE__, _("Unknown value."));
}
/* The behavior of this routine with respect to the source
flag is:
SRC_LINE: Print only source line
LOCATION: Print only location
SRC_AND_LOC: Print location and source line */
if (do_frame_printing)
print_stack_frame (get_selected_frame (NULL), 0, source_flag);
/* Display the auto-display expressions. */
do_displays ();
}
}
/* Save the function value return registers, if we care.
We might be about to restore their previous contents. */
if (inferior_thread ()->proceed_to_finish)
{
/* This should not be necessary. */
if (stop_registers)
regcache_xfree (stop_registers);
/* NB: The copy goes through to the target picking up the value of
all the registers. */
stop_registers = regcache_dup (get_current_regcache ());
}
if (stop_stack_dummy)
{
/* Pop the empty frame that contains the stack dummy.
This also restores inferior state prior to the call
(struct inferior_thread_state). */
struct frame_info *frame = get_current_frame ();
gdb_assert (get_frame_type (frame) == DUMMY_FRAME);
frame_pop (frame);
/* frame_pop() calls reinit_frame_cache as the last thing it does
which means there's currently no selected frame. We don't need
to re-establish a selected frame if the dummy call returns normally,
that will be done by restore_inferior_status. However, we do have
to handle the case where the dummy call is returning after being
stopped (e.g. the dummy call previously hit a breakpoint). We
can't know which case we have so just always re-establish a
selected frame here. */
select_frame (get_current_frame ());
}
done:
annotate_stopped ();
/* Suppress the stop observer if we're in the middle of:
- a step n (n > 1), as there still more steps to be done.
- a "finish" command, as the observer will be called in
finish_command_continuation, so it can include the inferior
function's return value.
- calling an inferior function, as we pretend we inferior didn't
run at all. The return value of the call is handled by the
expression evaluator, through call_function_by_hand. */
if (!target_has_execution
|| last.kind == TARGET_WAITKIND_SIGNALLED
|| last.kind == TARGET_WAITKIND_EXITED
|| (!inferior_thread ()->step_multi
&& !(inferior_thread ()->stop_bpstat
&& inferior_thread ()->proceed_to_finish)
&& !inferior_thread ()->in_infcall))
{
if (!ptid_equal (inferior_ptid, null_ptid))
observer_notify_normal_stop (inferior_thread ()->stop_bpstat,
stop_print_frame);
else
observer_notify_normal_stop (NULL, stop_print_frame);
}
if (target_has_execution)
{
if (last.kind != TARGET_WAITKIND_SIGNALLED
&& last.kind != TARGET_WAITKIND_EXITED)
/* Delete the breakpoint we stopped at, if it wants to be deleted.
Delete any breakpoint that is to be deleted at the next stop. */
breakpoint_auto_delete (inferior_thread ()->stop_bpstat);
}
}
static int
hook_stop_stub (void *cmd)
{
execute_cmd_pre_hook ((struct cmd_list_element *) cmd);
return (0);
}
int
signal_stop_state (int signo)
{
return signal_stop[signo];
}
int
signal_print_state (int signo)
{
return signal_print[signo];
}
int
signal_pass_state (int signo)
{
return signal_program[signo];
}
int
signal_stop_update (int signo, int state)
{
int ret = signal_stop[signo];
signal_stop[signo] = state;
return ret;
}
int
signal_print_update (int signo, int state)
{
int ret = signal_print[signo];
signal_print[signo] = state;
return ret;
}
int
signal_pass_update (int signo, int state)
{
int ret = signal_program[signo];
signal_program[signo] = state;
return ret;
}
static void
sig_print_header (void)
{
printf_filtered (_("\
Signal Stop\tPrint\tPass to program\tDescription\n"));
}
static void
sig_print_info (enum target_signal oursig)
{
const char *name = target_signal_to_name (oursig);
int name_padding = 13 - strlen (name);
if (name_padding <= 0)
name_padding = 0;
printf_filtered ("%s", name);
printf_filtered ("%*.*s ", name_padding, name_padding, " ");
printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
printf_filtered ("%s\n", target_signal_to_string (oursig));
}
/* Specify how various signals in the inferior should be handled. */
static void
handle_command (char *args, int from_tty)
{
char **argv;
int digits, wordlen;
int sigfirst, signum, siglast;
enum target_signal oursig;
int allsigs;
int nsigs;
unsigned char *sigs;
struct cleanup *old_chain;
if (args == NULL)
{
error_no_arg (_("signal to handle"));
}
/* Allocate and zero an array of flags for which signals to handle. */
nsigs = (int) TARGET_SIGNAL_LAST;
sigs = (unsigned char *) alloca (nsigs);
memset (sigs, 0, nsigs);
/* Break the command line up into args. */
argv = gdb_buildargv (args);
old_chain = make_cleanup_freeargv (argv);
/* Walk through the args, looking for signal oursigs, signal names, and
actions. Signal numbers and signal names may be interspersed with
actions, with the actions being performed for all signals cumulatively
specified. Signal ranges can be specified as <LOW>-<HIGH>. */
while (*argv != NULL)
{
wordlen = strlen (*argv);
for (digits = 0; isdigit ((*argv)[digits]); digits++)
{;
}
allsigs = 0;
sigfirst = siglast = -1;
if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
{
/* Apply action to all signals except those used by the
debugger. Silently skip those. */
allsigs = 1;
sigfirst = 0;
siglast = nsigs - 1;
}
else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
{
SET_SIGS (nsigs, sigs, signal_stop);
SET_SIGS (nsigs, sigs, signal_print);
}
else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_program);
}
else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
{
SET_SIGS (nsigs, sigs, signal_print);
}
else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
{
SET_SIGS (nsigs, sigs, signal_program);
}
else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_stop);
}
else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
{
SET_SIGS (nsigs, sigs, signal_program);
}
else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_print);
UNSET_SIGS (nsigs, sigs, signal_stop);
}
else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
{
UNSET_SIGS (nsigs, sigs, signal_program);
}
else if (digits > 0)
{
/* It is numeric. The numeric signal refers to our own
internal signal numbering from target.h, not to host/target
signal number. This is a feature; users really should be
using symbolic names anyway, and the common ones like
SIGHUP, SIGINT, SIGALRM, etc. will work right anyway. */
sigfirst = siglast = (int)
target_signal_from_command (atoi (*argv));
if ((*argv)[digits] == '-')
{
siglast = (int)
target_signal_from_command (atoi ((*argv) + digits + 1));
}
if (sigfirst > siglast)
{
/* Bet he didn't figure we'd think of this case... */
signum = sigfirst;
sigfirst = siglast;
siglast = signum;
}
}
else
{
oursig = target_signal_from_name (*argv);
if (oursig != TARGET_SIGNAL_UNKNOWN)
{
sigfirst = siglast = (int) oursig;
}
else
{
/* Not a number and not a recognized flag word => complain. */
error (_("Unrecognized or ambiguous flag word: \"%s\"."), *argv);
}
}
/* If any signal numbers or symbol names were found, set flags for
which signals to apply actions to. */
for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
{
switch ((enum target_signal) signum)
{
case TARGET_SIGNAL_TRAP:
case TARGET_SIGNAL_INT:
if (!allsigs && !sigs[signum])
{
if (query (_("%s is used by the debugger.\n\
Are you sure you want to change it? "), target_signal_to_name ((enum target_signal) signum)))
{
sigs[signum] = 1;
}
else
{
printf_unfiltered (_("Not confirmed, unchanged.\n"));
gdb_flush (gdb_stdout);
}
}
break;
case TARGET_SIGNAL_0:
case TARGET_SIGNAL_DEFAULT:
case TARGET_SIGNAL_UNKNOWN:
/* Make sure that "all" doesn't print these. */
break;
default:
sigs[signum] = 1;
break;
}
}
argv++;
}
for (signum = 0; signum < nsigs; signum++)
if (sigs[signum])
{
target_notice_signals (inferior_ptid);
if (from_tty)
{
/* Show the results. */
sig_print_header ();
for (; signum < nsigs; signum++)
if (sigs[signum])
sig_print_info (signum);
}
break;
}
do_cleanups (old_chain);
}
static void
xdb_handle_command (char *args, int from_tty)
{
char **argv;
struct cleanup *old_chain;
if (args == NULL)
error_no_arg (_("xdb command"));
/* Break the command line up into args. */
argv = gdb_buildargv (args);
old_chain = make_cleanup_freeargv (argv);
if (argv[1] != (char *) NULL)
{
char *argBuf;
int bufLen;
bufLen = strlen (argv[0]) + 20;
argBuf = (char *) xmalloc (bufLen);
if (argBuf)
{
int validFlag = 1;
enum target_signal oursig;
oursig = target_signal_from_name (argv[0]);
memset (argBuf, 0, bufLen);
if (strcmp (argv[1], "Q") == 0)
sprintf (argBuf, "%s %s", argv[0], "noprint");
else
{
if (strcmp (argv[1], "s") == 0)
{
if (!signal_stop[oursig])
sprintf (argBuf, "%s %s", argv[0], "stop");
else
sprintf (argBuf, "%s %s", argv[0], "nostop");
}
else if (strcmp (argv[1], "i") == 0)
{
if (!signal_program[oursig])
sprintf (argBuf, "%s %s", argv[0], "pass");
else
sprintf (argBuf, "%s %s", argv[0], "nopass");
}
else if (strcmp (argv[1], "r") == 0)
{
if (!signal_print[oursig])
sprintf (argBuf, "%s %s", argv[0], "print");
else
sprintf (argBuf, "%s %s", argv[0], "noprint");
}
else
validFlag = 0;
}
if (validFlag)
handle_command (argBuf, from_tty);
else
printf_filtered (_("Invalid signal handling flag.\n"));
if (argBuf)
xfree (argBuf);
}
}
do_cleanups (old_chain);
}
/* Print current contents of the tables set by the handle command.
It is possible we should just be printing signals actually used
by the current target (but for things to work right when switching
targets, all signals should be in the signal tables). */
static void
signals_info (char *signum_exp, int from_tty)
{
enum target_signal oursig;
sig_print_header ();
if (signum_exp)
{
/* First see if this is a symbol name. */
oursig = target_signal_from_name (signum_exp);
if (oursig == TARGET_SIGNAL_UNKNOWN)
{
/* No, try numeric. */
oursig =
target_signal_from_command (parse_and_eval_long (signum_exp));
}
sig_print_info (oursig);
return;
}
printf_filtered ("\n");
/* These ugly casts brought to you by the native VAX compiler. */
for (oursig = TARGET_SIGNAL_FIRST;
(int) oursig < (int) TARGET_SIGNAL_LAST;
oursig = (enum target_signal) ((int) oursig + 1))
{
QUIT;
if (oursig != TARGET_SIGNAL_UNKNOWN
&& oursig != TARGET_SIGNAL_DEFAULT && oursig != TARGET_SIGNAL_0)
sig_print_info (oursig);
}
printf_filtered (_("\nUse the \"handle\" command to change these tables.\n"));
}
/* The $_siginfo convenience variable is a bit special. We don't know
for sure the type of the value until we actually have a chance to
fetch the data. The type can change depending on gdbarch, so it it
also dependent on which thread you have selected.
1. making $_siginfo be an internalvar that creates a new value on
access.
2. making the value of $_siginfo be an lval_computed value. */
/* This function implements the lval_computed support for reading a
$_siginfo value. */
static void
siginfo_value_read (struct value *v)
{
LONGEST transferred;
transferred =
target_read (&current_target, TARGET_OBJECT_SIGNAL_INFO,
NULL,
value_contents_all_raw (v),
value_offset (v),
TYPE_LENGTH (value_type (v)));
if (transferred != TYPE_LENGTH (value_type (v)))
error (_("Unable to read siginfo"));
}
/* This function implements the lval_computed support for writing a
$_siginfo value. */
static void
siginfo_value_write (struct value *v, struct value *fromval)
{
LONGEST transferred;
transferred = target_write (&current_target,
TARGET_OBJECT_SIGNAL_INFO,
NULL,
value_contents_all_raw (fromval),
value_offset (v),
TYPE_LENGTH (value_type (fromval)));
if (transferred != TYPE_LENGTH (value_type (fromval)))
error (_("Unable to write siginfo"));
}
static struct lval_funcs siginfo_value_funcs =
{
siginfo_value_read,
siginfo_value_write
};
/* Return a new value with the correct type for the siginfo object of
the current thread. Return a void value if there's no object
available. */
static struct value *
siginfo_make_value (struct internalvar *var)
{
struct type *type;
struct gdbarch *gdbarch;
if (target_has_stack
&& !ptid_equal (inferior_ptid, null_ptid))
{
gdbarch = get_frame_arch (get_current_frame ());
if (gdbarch_get_siginfo_type_p (gdbarch))
{
type = gdbarch_get_siginfo_type (gdbarch);
return allocate_computed_value (type, &siginfo_value_funcs, NULL);
}
}
return allocate_value (builtin_type_void);
}
/* Inferior thread state.
These are details related to the inferior itself, and don't include
things like what frame the user had selected or what gdb was doing
with the target at the time.
For inferior function calls these are things we want to restore
regardless of whether the function call successfully completes
or the dummy frame has to be manually popped. */
struct inferior_thread_state
{
enum target_signal stop_signal;
CORE_ADDR stop_pc;
struct regcache *registers;
};
struct inferior_thread_state *
save_inferior_thread_state (void)
{
struct inferior_thread_state *inf_state = XMALLOC (struct inferior_thread_state);
struct thread_info *tp = inferior_thread ();
inf_state->stop_signal = tp->stop_signal;
inf_state->stop_pc = stop_pc;
inf_state->registers = regcache_dup (get_current_regcache ());
return inf_state;
}
/* Restore inferior session state to INF_STATE. */
void
restore_inferior_thread_state (struct inferior_thread_state *inf_state)
{
struct thread_info *tp = inferior_thread ();
tp->stop_signal = inf_state->stop_signal;
stop_pc = inf_state->stop_pc;
/* The inferior can be gone if the user types "print exit(0)"
(and perhaps other times). */
if (target_has_execution)
/* NB: The register write goes through to the target. */
regcache_cpy (get_current_regcache (), inf_state->registers);
regcache_xfree (inf_state->registers);
xfree (inf_state);
}
static void
do_restore_inferior_thread_state_cleanup (void *state)
{
restore_inferior_thread_state (state);
}
struct cleanup *
make_cleanup_restore_inferior_thread_state (struct inferior_thread_state *inf_state)
{
return make_cleanup (do_restore_inferior_thread_state_cleanup, inf_state);
}
void
discard_inferior_thread_state (struct inferior_thread_state *inf_state)
{
regcache_xfree (inf_state->registers);
xfree (inf_state);
}
struct regcache *
get_inferior_thread_state_regcache (struct inferior_thread_state *inf_state)
{
return inf_state->registers;
}
/* Session related state for inferior function calls.
These are the additional bits of state that need to be restored
when an inferior function call successfully completes. */
struct inferior_status
{
bpstat stop_bpstat;
int stop_step;
int stop_stack_dummy;
int stopped_by_random_signal;
int stepping_over_breakpoint;
CORE_ADDR step_range_start;
CORE_ADDR step_range_end;
struct frame_id step_frame_id;
enum step_over_calls_kind step_over_calls;
CORE_ADDR step_resume_break_address;
int stop_after_trap;
int stop_soon;
/* ID if the selected frame when the inferior function call was made. */
struct frame_id selected_frame_id;
int proceed_to_finish;
int in_infcall;
};
/* Save all of the information associated with the inferior<==>gdb
connection. */
struct inferior_status *
save_inferior_status (void)
{
struct inferior_status *inf_status = XMALLOC (struct inferior_status);
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
inf_status->stop_step = tp->stop_step;
inf_status->stop_stack_dummy = stop_stack_dummy;
inf_status->stopped_by_random_signal = stopped_by_random_signal;
inf_status->stepping_over_breakpoint = tp->trap_expected;
inf_status->step_range_start = tp->step_range_start;
inf_status->step_range_end = tp->step_range_end;
inf_status->step_frame_id = tp->step_frame_id;
inf_status->step_over_calls = tp->step_over_calls;
inf_status->stop_after_trap = stop_after_trap;
inf_status->stop_soon = inf->stop_soon;
/* Save original bpstat chain here; replace it with copy of chain.
If caller's caller is walking the chain, they'll be happier if we
hand them back the original chain when restore_inferior_status is
called. */
inf_status->stop_bpstat = tp->stop_bpstat;
tp->stop_bpstat = bpstat_copy (tp->stop_bpstat);
inf_status->proceed_to_finish = tp->proceed_to_finish;
inf_status->in_infcall = tp->in_infcall;
inf_status->selected_frame_id = get_frame_id (get_selected_frame (NULL));
return inf_status;
}
static int
restore_selected_frame (void *args)
{
struct frame_id *fid = (struct frame_id *) args;
struct frame_info *frame;
frame = frame_find_by_id (*fid);
/* If inf_status->selected_frame_id is NULL, there was no previously
selected frame. */
if (frame == NULL)
{
warning (_("Unable to restore previously selected frame."));
return 0;
}
select_frame (frame);
return (1);
}
/* Restore inferior session state to INF_STATUS. */
void
restore_inferior_status (struct inferior_status *inf_status)
{
struct thread_info *tp = inferior_thread ();
struct inferior *inf = current_inferior ();
tp->stop_step = inf_status->stop_step;
stop_stack_dummy = inf_status->stop_stack_dummy;
stopped_by_random_signal = inf_status->stopped_by_random_signal;
tp->trap_expected = inf_status->stepping_over_breakpoint;
tp->step_range_start = inf_status->step_range_start;
tp->step_range_end = inf_status->step_range_end;
tp->step_frame_id = inf_status->step_frame_id;
tp->step_over_calls = inf_status->step_over_calls;
stop_after_trap = inf_status->stop_after_trap;
inf->stop_soon = inf_status->stop_soon;
bpstat_clear (&tp->stop_bpstat);
tp->stop_bpstat = inf_status->stop_bpstat;
inf_status->stop_bpstat = NULL;
tp->proceed_to_finish = inf_status->proceed_to_finish;
tp->in_infcall = inf_status->in_infcall;
if (target_has_stack)
{
/* The point of catch_errors is that if the stack is clobbered,
walking the stack might encounter a garbage pointer and
error() trying to dereference it. */
if (catch_errors
(restore_selected_frame, &inf_status->selected_frame_id,
"Unable to restore previously selected frame:\n",
RETURN_MASK_ERROR) == 0)
/* Error in restoring the selected frame. Select the innermost
frame. */
select_frame (get_current_frame ());
}
xfree (inf_status);
}
static void
do_restore_inferior_status_cleanup (void *sts)
{
restore_inferior_status (sts);
}
struct cleanup *
make_cleanup_restore_inferior_status (struct inferior_status *inf_status)
{
return make_cleanup (do_restore_inferior_status_cleanup, inf_status);
}
void
discard_inferior_status (struct inferior_status *inf_status)
{
/* See save_inferior_status for info on stop_bpstat. */
bpstat_clear (&inf_status->stop_bpstat);
xfree (inf_status);
}
int
inferior_has_forked (ptid_t pid, ptid_t *child_pid)
{
struct target_waitstatus last;
ptid_t last_ptid;
get_last_target_status (&last_ptid, &last);
if (last.kind != TARGET_WAITKIND_FORKED)
return 0;
if (!ptid_equal (last_ptid, pid))
return 0;
*child_pid = last.value.related_pid;
return 1;
}
int
inferior_has_vforked (ptid_t pid, ptid_t *child_pid)
{
struct target_waitstatus last;
ptid_t last_ptid;
get_last_target_status (&last_ptid, &last);
if (last.kind != TARGET_WAITKIND_VFORKED)
return 0;
if (!ptid_equal (last_ptid, pid))
return 0;
*child_pid = last.value.related_pid;
return 1;
}
int
inferior_has_execd (ptid_t pid, char **execd_pathname)
{
struct target_waitstatus last;
ptid_t last_ptid;
get_last_target_status (&last_ptid, &last);
if (last.kind != TARGET_WAITKIND_EXECD)
return 0;
if (!ptid_equal (last_ptid, pid))
return 0;
*execd_pathname = xstrdup (last.value.execd_pathname);
return 1;
}
/* Oft used ptids */
ptid_t null_ptid;
ptid_t minus_one_ptid;
/* Create a ptid given the necessary PID, LWP, and TID components. */
ptid_t
ptid_build (int pid, long lwp, long tid)
{
ptid_t ptid;
ptid.pid = pid;
ptid.lwp = lwp;
ptid.tid = tid;
return ptid;
}
/* Create a ptid from just a pid. */
ptid_t
pid_to_ptid (int pid)
{
return ptid_build (pid, 0, 0);
}
/* Fetch the pid (process id) component from a ptid. */
int
ptid_get_pid (ptid_t ptid)
{
return ptid.pid;
}
/* Fetch the lwp (lightweight process) component from a ptid. */
long
ptid_get_lwp (ptid_t ptid)
{
return ptid.lwp;
}
/* Fetch the tid (thread id) component from a ptid. */
long
ptid_get_tid (ptid_t ptid)
{
return ptid.tid;
}
/* ptid_equal() is used to test equality of two ptids. */
int
ptid_equal (ptid_t ptid1, ptid_t ptid2)
{
return (ptid1.pid == ptid2.pid && ptid1.lwp == ptid2.lwp
&& ptid1.tid == ptid2.tid);
}
/* Returns true if PTID represents a process. */
int
ptid_is_pid (ptid_t ptid)
{
if (ptid_equal (minus_one_ptid, ptid))
return 0;
if (ptid_equal (null_ptid, ptid))
return 0;
return (ptid_get_lwp (ptid) == 0 && ptid_get_tid (ptid) == 0);
}
/* restore_inferior_ptid() will be used by the cleanup machinery
to restore the inferior_ptid value saved in a call to
save_inferior_ptid(). */
static void
restore_inferior_ptid (void *arg)
{
ptid_t *saved_ptid_ptr = arg;
inferior_ptid = *saved_ptid_ptr;
xfree (arg);
}
/* Save the value of inferior_ptid so that it may be restored by a
later call to do_cleanups(). Returns the struct cleanup pointer
needed for later doing the cleanup. */
struct cleanup *
save_inferior_ptid (void)
{
ptid_t *saved_ptid_ptr;
saved_ptid_ptr = xmalloc (sizeof (ptid_t));
*saved_ptid_ptr = inferior_ptid;
return make_cleanup (restore_inferior_ptid, saved_ptid_ptr);
}
/* User interface for reverse debugging:
Set exec-direction / show exec-direction commands
(returns error unless target implements to_set_exec_direction method). */
enum exec_direction_kind execution_direction = EXEC_FORWARD;
static const char exec_forward[] = "forward";
static const char exec_reverse[] = "reverse";
static const char *exec_direction = exec_forward;
static const char *exec_direction_names[] = {
exec_forward,
exec_reverse,
NULL
};
static void
set_exec_direction_func (char *args, int from_tty,
struct cmd_list_element *cmd)
{
if (target_can_execute_reverse)
{
if (!strcmp (exec_direction, exec_forward))
execution_direction = EXEC_FORWARD;
else if (!strcmp (exec_direction, exec_reverse))
execution_direction = EXEC_REVERSE;
}
}
static void
show_exec_direction_func (struct ui_file *out, int from_tty,
struct cmd_list_element *cmd, const char *value)
{
switch (execution_direction) {
case EXEC_FORWARD:
fprintf_filtered (out, _("Forward.\n"));
break;
case EXEC_REVERSE:
fprintf_filtered (out, _("Reverse.\n"));
break;
case EXEC_ERROR:
default:
fprintf_filtered (out,
_("Forward (target `%s' does not support exec-direction).\n"),
target_shortname);
break;
}
}
/* User interface for non-stop mode. */
int non_stop = 0;
static int non_stop_1 = 0;
static void
set_non_stop (char *args, int from_tty,
struct cmd_list_element *c)
{
if (target_has_execution)
{
non_stop_1 = non_stop;
error (_("Cannot change this setting while the inferior is running."));
}
non_stop = non_stop_1;
}
static void
show_non_stop (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file,
_("Controlling the inferior in non-stop mode is %s.\n"),
value);
}
void
_initialize_infrun (void)
{
int i;
int numsigs;
struct cmd_list_element *c;
add_info ("signals", signals_info, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
add_info_alias ("handle", "signals", 0);
add_com ("handle", class_run, handle_command, _("\
Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
used by the debugger, typically SIGTRAP and SIGINT.\n\
Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
Pass and Stop may be combined."));
if (xdb_commands)
{
add_com ("lz", class_info, signals_info, _("\
What debugger does when program gets various signals.\n\
Specify a signal as argument to print info on that signal only."));
add_com ("z", class_run, xdb_handle_command, _("\
Specify how to handle a signal.\n\
Args are signals and actions to apply to those signals.\n\
Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
from 1-15 are allowed for compatibility with old versions of GDB.\n\
Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
The special arg \"all\" is recognized to mean all signals except those\n\
used by the debugger, typically SIGTRAP and SIGINT.\n\
Recognized actions include \"s\" (toggles between stop and nostop), \n\
\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
nopass), \"Q\" (noprint)\n\
Stop means reenter debugger if this signal happens (implies print).\n\
Print means print a message if this signal happens.\n\
Pass means let program see this signal; otherwise program doesn't know.\n\
Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
Pass and Stop may be combined."));
}
if (!dbx_commands)
stop_command = add_cmd ("stop", class_obscure,
not_just_help_class_command, _("\
There is no `stop' command, but you can set a hook on `stop'.\n\
This allows you to set a list of commands to be run each time execution\n\
of the program stops."), &cmdlist);
add_setshow_zinteger_cmd ("infrun", class_maintenance, &debug_infrun, _("\
Set inferior debugging."), _("\
Show inferior debugging."), _("\
When non-zero, inferior specific debugging is enabled."),
NULL,
show_debug_infrun,
&setdebuglist, &showdebuglist);
add_setshow_boolean_cmd ("displaced", class_maintenance, &debug_displaced, _("\
Set displaced stepping debugging."), _("\
Show displaced stepping debugging."), _("\
When non-zero, displaced stepping specific debugging is enabled."),
NULL,
show_debug_displaced,
&setdebuglist, &showdebuglist);
add_setshow_boolean_cmd ("non-stop", no_class,
&non_stop_1, _("\
Set whether gdb controls the inferior in non-stop mode."), _("\
Show whether gdb controls the inferior in non-stop mode."), _("\
When debugging a multi-threaded program and this setting is\n\
off (the default, also called all-stop mode), when one thread stops\n\
(for a breakpoint, watchpoint, exception, or similar events), GDB stops\n\
all other threads in the program while you interact with the thread of\n\
interest. When you continue or step a thread, you can allow the other\n\
threads to run, or have them remain stopped, but while you inspect any\n\
thread's state, all threads stop.\n\
\n\
In non-stop mode, when one thread stops, other threads can continue\n\
to run freely. You'll be able to step each thread independently,\n\
leave it stopped or free to run as needed."),
set_non_stop,
show_non_stop,
&setlist,
&showlist);
numsigs = (int) TARGET_SIGNAL_LAST;
signal_stop = (unsigned char *) xmalloc (sizeof (signal_stop[0]) * numsigs);
signal_print = (unsigned char *)
xmalloc (sizeof (signal_print[0]) * numsigs);
signal_program = (unsigned char *)
xmalloc (sizeof (signal_program[0]) * numsigs);
for (i = 0; i < numsigs; i++)
{
signal_stop[i] = 1;
signal_print[i] = 1;
signal_program[i] = 1;
}
/* Signals caused by debugger's own actions
should not be given to the program afterwards. */
signal_program[TARGET_SIGNAL_TRAP] = 0;
signal_program[TARGET_SIGNAL_INT] = 0;
/* Signals that are not errors should not normally enter the debugger. */
signal_stop[TARGET_SIGNAL_ALRM] = 0;
signal_print[TARGET_SIGNAL_ALRM] = 0;
signal_stop[TARGET_SIGNAL_VTALRM] = 0;
signal_print[TARGET_SIGNAL_VTALRM] = 0;
signal_stop[TARGET_SIGNAL_PROF] = 0;
signal_print[TARGET_SIGNAL_PROF] = 0;
signal_stop[TARGET_SIGNAL_CHLD] = 0;
signal_print[TARGET_SIGNAL_CHLD] = 0;
signal_stop[TARGET_SIGNAL_IO] = 0;
signal_print[TARGET_SIGNAL_IO] = 0;
signal_stop[TARGET_SIGNAL_POLL] = 0;
signal_print[TARGET_SIGNAL_POLL] = 0;
signal_stop[TARGET_SIGNAL_URG] = 0;
signal_print[TARGET_SIGNAL_URG] = 0;
signal_stop[TARGET_SIGNAL_WINCH] = 0;
signal_print[TARGET_SIGNAL_WINCH] = 0;
/* These signals are used internally by user-level thread
implementations. (See signal(5) on Solaris.) Like the above
signals, a healthy program receives and handles them as part of
its normal operation. */
signal_stop[TARGET_SIGNAL_LWP] = 0;
signal_print[TARGET_SIGNAL_LWP] = 0;
signal_stop[TARGET_SIGNAL_WAITING] = 0;
signal_print[TARGET_SIGNAL_WAITING] = 0;
signal_stop[TARGET_SIGNAL_CANCEL] = 0;
signal_print[TARGET_SIGNAL_CANCEL] = 0;
add_setshow_zinteger_cmd ("stop-on-solib-events", class_support,
&stop_on_solib_events, _("\
Set stopping for shared library events."), _("\
Show stopping for shared library events."), _("\
If nonzero, gdb will give control to the user when the dynamic linker\n\
notifies gdb of shared library events. The most common event of interest\n\
to the user would be loading/unloading of a new library."),
NULL,
show_stop_on_solib_events,
&setlist, &showlist);
add_setshow_enum_cmd ("follow-fork-mode", class_run,
follow_fork_mode_kind_names,
&follow_fork_mode_string, _("\
Set debugger response to a program call of fork or vfork."), _("\
Show debugger response to a program call of fork or vfork."), _("\
A fork or vfork creates a new process. follow-fork-mode can be:\n\
parent - the original process is debugged after a fork\n\
child - the new process is debugged after a fork\n\
The unfollowed process will continue to run.\n\
By default, the debugger will follow the parent process."),
NULL,
show_follow_fork_mode_string,
&setlist, &showlist);
add_setshow_enum_cmd ("scheduler-locking", class_run,
scheduler_enums, &scheduler_mode, _("\
Set mode for locking scheduler during execution."), _("\
Show mode for locking scheduler during execution."), _("\
off == no locking (threads may preempt at any time)\n\
on == full locking (no thread except the current thread may run)\n\
step == scheduler locked during every single-step operation.\n\
In this mode, no other thread may run during a step command.\n\
Other threads may run while stepping over a function call ('next')."),
set_schedlock_func, /* traps on target vector */
show_scheduler_mode,
&setlist, &showlist);
add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
Set mode of the step operation."), _("\
Show mode of the step operation."), _("\
When set, doing a step over a function without debug line information\n\
will stop at the first instruction of that function. Otherwise, the\n\
function is skipped and the step command stops at a different source line."),
NULL,
show_step_stop_if_no_debug,
&setlist, &showlist);
add_setshow_enum_cmd ("displaced-stepping", class_run,
can_use_displaced_stepping_enum,
&can_use_displaced_stepping, _("\
Set debugger's willingness to use displaced stepping."), _("\
Show debugger's willingness to use displaced stepping."), _("\
If on, gdb will use displaced stepping to step over breakpoints if it is\n\
supported by the target architecture. If off, gdb will not use displaced\n\
stepping to step over breakpoints, even if such is supported by the target\n\
architecture. If auto (which is the default), gdb will use displaced stepping\n\
if the target architecture supports it and non-stop mode is active, but will not\n\
use it in all-stop mode (see help set non-stop)."),
NULL,
show_can_use_displaced_stepping,
&setlist, &showlist);
add_setshow_enum_cmd ("exec-direction", class_run, exec_direction_names,
&exec_direction, _("Set direction of execution.\n\
Options are 'forward' or 'reverse'."),
_("Show direction of execution (forward/reverse)."),
_("Tells gdb whether to execute forward or backward."),
set_exec_direction_func, show_exec_direction_func,
&setlist, &showlist);
/* ptid initializations */
null_ptid = ptid_build (0, 0, 0);
minus_one_ptid = ptid_build (-1, 0, 0);
inferior_ptid = null_ptid;
target_last_wait_ptid = minus_one_ptid;
displaced_step_ptid = null_ptid;
observer_attach_thread_ptid_changed (infrun_thread_ptid_changed);
observer_attach_thread_stop_requested (infrun_thread_stop_requested);
observer_attach_thread_exit (infrun_thread_thread_exit);
/* Explicitly create without lookup, since that tries to create a
value with a void typed value, and when we get here, gdbarch
isn't initialized yet. At this point, we're quite sure there
isn't another convenience variable of the same name. */
create_internalvar_type_lazy ("_siginfo", siginfo_make_value);
}
Reference in a new issue View git blame Copy permalink