old-cross-binutils/include/xtensa-config.h
Bob Wilson 33430bd0ae include/
* xtensa-config.h (XCHAL_HAVE_MUL16, XCHAL_HAVE_MUL32, XCHAL_HAVE_DIV32)
	(XCHAL_HAVE_MINMAX, XCHAL_HAVE_SEXT, XCHAL_HAVE_THREADPTR)
	(XCHAL_HAVE_RELEASE_SYNC, XCHAL_HAVE_S32C1I): Change to 1.
	(XCHAL_NUM_AREGS): Change to 32.
	(XCHAL_ICACHE_SIZE, XCHAL_DCACHE_SIZE): Change to 16K.
	(XCHAL_ICACHE_LINESIZE, XCHAL_DCACHE_LINESIZE): Change to 32.
	(XCHAL_ICACHE_LINEWIDTH, XCHAL_DCACHE_LINEWIDTH): Change to 5.
	(XCHAL_DCACHE_IS_WRITEBACK): Change to 1.
	(XCHAL_DEBUGLEVEL): Change to 6.
bfd/
	* xtensa-modules.c (sysregs): Add MMID, VECBASE, EPC5, EPC6, EPC7,
	EXCSAVE5, EXCSAVE6, EXCSAVE7, EPS5, EPS6, EPS7, CPENABLE,
	SCOMPARE1, and THREADPTR registers.
	(NUM_SYSREGS, MAX_USER_REG): Update.
	(states): Change width of INTERRUPT, WindowBase, WindowStart, and
	INTENABLE.  Add VECBASE, EPC5, EPC6, EPC7, EXCSAVE5, EXCSAVE6,
	EXCSAVE7, EPS6, EPS6, EPS7, THREADPTR, CPENABLE, and SCOMPARE1 states.
	(NUM_STATES): Update.
	(enum xtensa_state_id): Add entries for new states.
	(enum xtensa_field_id): Add entries for xt_wbr15_imm and xt_wbr18_imm
	fields, along with functions to extract and set them.
	(regfiles): Change number of AR registers to 32.
	(Operand_ar0_encode, Operand_ar4_encode, Operand_ar8_encode,
	Operand_ar12_encode, Operand_ars_entry_encode): Update register mask.
	(operands): Add entries for tp7, xt_wbr15_label, xt_wbr18_label,
	xt_wbr15_imm, and xt_wbr18_imm operands, along with functions to
	encode and decode them.
	(enum xtensa_operand_id): Add entries for new operands.
	(Iclass_xt_iclass_rfi_stateArgs): Add EPC5, EPC6, EPC7, EPS5, EPS6, and
	EPC7 states.
	(Iclass_xt_iclass_rfdo_stateArgs): Replace EPC4 and EPS4 by EPC6 and
	EPS6, respectively.
	(iclasses): Add entries for rur_threadptr, wur_threadptr,
	xt_iclass_wsr_176, xt_iclass_rsr_epc5, xt_iclass_wsr_epc5,
	xt_iclass_xsr_epc5, xt_iclass_rsr_excsave5, xt_iclass_wsr_excsave5,
	xt_iclass_xsr_excsave5, xt_iclass_rsr_epc6, xt_iclass_wsr_epc6,
	xt_iclass_xsr_epc6, xt_iclass_rsr_excsave6, xt_iclass_wsr_excsave6,
	xt_iclass_xsr_excsave6, xt_iclass_rsr_epc7, xt_iclass_wsr_epc7,
	xt_iclass_xsr_epc7, xt_iclass_rsr_excsave7, xt_iclass_wsr_excsave7,
	xt_iclass_xsr_excsave7, xt_iclass_rsr_eps5, xt_iclass_wsr_eps5,
	xt_iclass_xsr_eps5, xt_iclass_rsr_eps6, xt_iclass_wsr_eps6,
	xt_iclass_xsr_eps6, xt_iclass_rsr_eps7, xt_iclass_wsr_eps7,
	xt_iclass_xsr_eps7, xt_iclass_rsr_vecbase, xt_iclass_wsr_vecbase,
	xt_iclass_xsr_vecbase, xt_iclass_mul16, xt_iclass_wsr_mmid,
	xt_iclass_icache_lock, xt_iclass_dcache_lock, xt_iclass_rsr_cpenable,
	xt_iclass_wsr_cpenable, xt_iclass_xsr_cpenable, xt_iclass_clamp,
	xt_iclass_minmax, xt_iclass_sx, xt_iclass_l32ai, xt_iclass_s32ri,
	xt_iclass_s32c1i, xt_iclass_rsr_scompare1, xt_iclass_wsr_scompare1,
	xt_iclass_xsr_scompare1, xt_iclass_div, and xt_iclass_mul32, along
	with corresponding argument and state argument arrays.  Change
	number of state arguments for xt_iclass_rfi.  Add arguments for
	xt_iclass_rfdo.
	(enum xtensa_iclass_id): Add entries for new iclasses.
	(opcodes): Add entries for RUR_THREADPTR, WUR_THREADPTR, WSR_176,
	RSR_EPC5, WSR_EPC5, XSR_EPC5, RSR_EXCSAVE5, WSR_EXCSAVE5, XSR_EXCSAVE5,
	RSR_EPC6, WSR_EPC6, XSR_EPC6, RSR_EXCSAVE6, WSR_EXCSAVE6, XSR_EXCSAVE6,
	RSR_EPC7, WSR_EPC7, XSR_EPC7, RSR_EXCSAVE7, WSR_EXCSAVE7, XSR_EXCSAVE7,
	RSR_EPS5, WSR_EPS5, XSR_EPS5, RSR_EPS6, WSR_EPS6, XSR_EPS6, RSR_EPS7,
	WSR_EPS7, XSR_EPS7, RSR_VECBASE, WSR_VECBASE, XSR_VECBASE, MUL16U,
	MUL16S, WSR_MMID, IPFL, IHU, IIU, DPFL, DHU, DIU, RSR_CPENABLE,
	WSR_CPENABLE, XSR_CPENABLE, CLAMPS, MIN, MAX, MINU, MAXU, SEXT, L32AI,
	S32RI, S32C1I, RSR_SCOMPARE1, WSR_SCOMPARE1, XSR_SCOMPARE1, QUOU, QUOS,
	REMU, REMS, and MULL opcodes, along with the corresponding functions
	to encode them.
	(enum xtensa_opcode_id): Add entries for new opcodes.
	(Slot_inst_decode): Handle new opcodes.
	(Slot_inst_get_field_fns, Slot_inst_set_field_fns): Add entries for
	xt_wbr15_imm and xt_wbr18_imm fields.
	(Slot_inst16a_get_field_fns, Slot_inst16a_set_field_fns): Likewise.
	(Slot_inst16b_get_field_fns, Slot_inst16b_set_field_fns): Likewise.
	(xtensa_modules): Update number of fields, operands, iclasses and
	opcodes.
2008-11-19 18:25:20 +00:00

172 lines
3.9 KiB
C

/* Xtensa configuration settings.
Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Contributed by Bob Wilson (bwilson@tensilica.com) at Tensilica.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
#ifndef XTENSA_CONFIG_H
#define XTENSA_CONFIG_H
/* The macros defined here match those with the same names in the Xtensa
compile-time HAL (Hardware Abstraction Layer). Please refer to the
Xtensa System Software Reference Manual for documentation of these
macros. */
#undef XCHAL_HAVE_BE
#define XCHAL_HAVE_BE 1
#undef XCHAL_HAVE_DENSITY
#define XCHAL_HAVE_DENSITY 1
#undef XCHAL_HAVE_CONST16
#define XCHAL_HAVE_CONST16 0
#undef XCHAL_HAVE_ABS
#define XCHAL_HAVE_ABS 1
#undef XCHAL_HAVE_ADDX
#define XCHAL_HAVE_ADDX 1
#undef XCHAL_HAVE_L32R
#define XCHAL_HAVE_L32R 1
#undef XSHAL_USE_ABSOLUTE_LITERALS
#define XSHAL_USE_ABSOLUTE_LITERALS 0
#undef XCHAL_HAVE_MAC16
#define XCHAL_HAVE_MAC16 0
#undef XCHAL_HAVE_MUL16
#define XCHAL_HAVE_MUL16 1
#undef XCHAL_HAVE_MUL32
#define XCHAL_HAVE_MUL32 1
#undef XCHAL_HAVE_MUL32_HIGH
#define XCHAL_HAVE_MUL32_HIGH 0
#undef XCHAL_HAVE_DIV32
#define XCHAL_HAVE_DIV32 1
#undef XCHAL_HAVE_NSA
#define XCHAL_HAVE_NSA 1
#undef XCHAL_HAVE_MINMAX
#define XCHAL_HAVE_MINMAX 1
#undef XCHAL_HAVE_SEXT
#define XCHAL_HAVE_SEXT 1
#undef XCHAL_HAVE_LOOPS
#define XCHAL_HAVE_LOOPS 1
#undef XCHAL_HAVE_THREADPTR
#define XCHAL_HAVE_THREADPTR 1
#undef XCHAL_HAVE_RELEASE_SYNC
#define XCHAL_HAVE_RELEASE_SYNC 1
#undef XCHAL_HAVE_S32C1I
#define XCHAL_HAVE_S32C1I 1
#undef XCHAL_HAVE_BOOLEANS
#define XCHAL_HAVE_BOOLEANS 0
#undef XCHAL_HAVE_FP
#define XCHAL_HAVE_FP 0
#undef XCHAL_HAVE_FP_DIV
#define XCHAL_HAVE_FP_DIV 0
#undef XCHAL_HAVE_FP_RECIP
#define XCHAL_HAVE_FP_RECIP 0
#undef XCHAL_HAVE_FP_SQRT
#define XCHAL_HAVE_FP_SQRT 0
#undef XCHAL_HAVE_FP_RSQRT
#define XCHAL_HAVE_FP_RSQRT 0
#undef XCHAL_HAVE_WINDOWED
#define XCHAL_HAVE_WINDOWED 1
#undef XCHAL_NUM_AREGS
#define XCHAL_NUM_AREGS 32
#undef XCHAL_HAVE_WIDE_BRANCHES
#define XCHAL_HAVE_WIDE_BRANCHES 0
#undef XCHAL_HAVE_PREDICTED_BRANCHES
#define XCHAL_HAVE_PREDICTED_BRANCHES 0
#undef XCHAL_ICACHE_SIZE
#define XCHAL_ICACHE_SIZE 16384
#undef XCHAL_DCACHE_SIZE
#define XCHAL_DCACHE_SIZE 16384
#undef XCHAL_ICACHE_LINESIZE
#define XCHAL_ICACHE_LINESIZE 32
#undef XCHAL_DCACHE_LINESIZE
#define XCHAL_DCACHE_LINESIZE 32
#undef XCHAL_ICACHE_LINEWIDTH
#define XCHAL_ICACHE_LINEWIDTH 5
#undef XCHAL_DCACHE_LINEWIDTH
#define XCHAL_DCACHE_LINEWIDTH 5
#undef XCHAL_DCACHE_IS_WRITEBACK
#define XCHAL_DCACHE_IS_WRITEBACK 1
#undef XCHAL_HAVE_MMU
#define XCHAL_HAVE_MMU 1
#undef XCHAL_MMU_MIN_PTE_PAGE_SIZE
#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12
#undef XCHAL_HAVE_DEBUG
#define XCHAL_HAVE_DEBUG 1
#undef XCHAL_NUM_IBREAK
#define XCHAL_NUM_IBREAK 2
#undef XCHAL_NUM_DBREAK
#define XCHAL_NUM_DBREAK 2
#undef XCHAL_DEBUGLEVEL
#define XCHAL_DEBUGLEVEL 6
#undef XCHAL_MAX_INSTRUCTION_SIZE
#define XCHAL_MAX_INSTRUCTION_SIZE 3
#undef XCHAL_INST_FETCH_WIDTH
#define XCHAL_INST_FETCH_WIDTH 4
#undef XSHAL_ABI
#undef XTHAL_ABI_WINDOWED
#undef XTHAL_ABI_CALL0
#define XSHAL_ABI XTHAL_ABI_WINDOWED
#define XTHAL_ABI_WINDOWED 0
#define XTHAL_ABI_CALL0 1
#endif /* !XTENSA_CONFIG_H */