old-cross-binutils/opcodes/ChangeLog
Nick Clifton c1e2689731 PR binutils/10924
* arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
        (print_insn_arm): Extend %s format control code to check for
        unpredictable addressing modes.  Add support for %S format control
        code which suppresses this check.
        (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
        (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
        PRE_BIT_SET): New macros.
        (print_insn_coprocessor): Use the new macros instead of magic
        constants.
        (print_arm_address): Likewise.
        (pirnt_insn_arm): Likewise.
        (print_insn_thumb32): Likewise.
2009-11-11 09:44:45 +00:00

1385 lines
44 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2009-11-11 Nick Clifton <nickc@redhat.com>
PR binutils/10924
* arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
(print_insn_arm): Extend %s format control code to check for
unpredictable addressing modes. Add support for %S format control
code which suppresses this check.
(W_BIT, I_BIT, U_BIT, P_BIT): New macros.
(WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
PRE_BIT_SET): New macros.
(print_insn_coprocessor): Use the new macros instead of magic
constants.
(print_arm_address): Likewise.
(pirnt_insn_arm): Likewise.
(print_insn_thumb32): Likewise.
2009-11-11 Nick Clifton <nickc@redhat.com>
* po/id.po: Updated Indonesian translation.
2009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
* m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
2009-11-06 Sebastian Pop <sebastian.pop@amd.com>
* i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
the xop_table.
(get_valid_dis386): Removed unused condition (from cut/n/paste) for
XOP instructions.
2009-11-05 Sebastian Pop <sebastian.pop@amd.com>
Quentin Neill <quentin.neill@amd.com>
* opcodes/i386-dis.c (OP_LWPCB_E): New.
(OP_LWP_E): New.
(OP_LWP_I): New.
(USE_XOP_8F_TABLE): New.
(XOP_8F_TABLE): New.
(REG_XOP_LWPCB): New.
(REG_XOP_LWP): New.
(XOP_09): New.
(XOP_0A): New.
(reg_table): Redirect REG_8F to XOP_8F_TABLE.
Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
(xop_table): New.
(get_valid_dis386): Handle USE_XOP_8F_TABLE.
Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
to access to the vex_table.
(OP_LWPCB_E): New.
(OP_LWP_E): New.
(OP_LWP_I): New.
* opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
(cpu_flags): Add CpuLWP.
(opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
* opcodes/i386-opc.h (CpuLWP): New.
(i386_cpu_flags): Add bit cpulwp.
(VexLWP): New.
(XOP09): New.
(XOP0A): New.
(i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
* opcodes/i386-opc.tbl (llwpcb): Added.
(lwpval): Added.
(lwpins): Added.
2009-11-04 DJ Delorie <dj@redhat.com>
* rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
(mvtcp, mvfcp, opecp): Remove.
* rx-decode.c: Regenerate.
* rx-dis.c (cpen): Remove.
2009-11-03 Doug Evans <dje@sebabeach.org>
* m32c-desc.c: Regenerate.
* mep-desc.c: Regenerate.
2009-11-02 Paul Brook <paul@codesourcery.com>
* arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
Add VFPv4 instructions.
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* i386-dis.c (OP_VEX_FMA): Removed.
(VexFMA): Removed.
(Vex128FMA): Removed.
(prefix_table): First source operand of FMA4 insns is decoded
with Vex not with VexFMA.
(OP_EX_VexW): Second source operand is decoded with get_vex_imm8
when vex.w is set. Third source operand is decoded with
2009-10-27 Alan Modra <amodra@bigpond.net.au>
* Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2009-10-23 Doug Evans <dje@sebabeach.org>
* cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
* cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
* cgen-bitset.c: Update.
* fr30-desc.h: Regenerate.
* frv-desc.h: Regenerate.
* ip2k-desc.h: Regenerate.
* iq2000-desc.h: Regenerate.
* lm32-desc.h: Regenerate.
* m32c-desc.h: Regenerate.
* m32c-opc.h: Regenerate.
* m32r-desc.h: Regenerate.
* mep-desc.h: Regenerate.
* mt-desc.h: Regenerate.
* openrisc-desc.h: Regenerate.
* xc16x-desc.h: Regenerate.
* xstormy16-desc.h: Regenerate.
2009-10-22 DJ Delorie <dj@redhat.com>
* rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
* rx-decode.c: Regenerated.
2009-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10775
* i386-dis.c: Document LB, LS and LV macros.
(dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
with the 64-bit displacement or immediate operand.
(putop): Handle LB, LS and LV macros.
2009-10-18 Doug Evans <dje@sebabeach.org>
* lm32-opinst.c: Regenerate.
* m32c-desc.c: Regenerate.
* m32r-opinst.c: Regenerate.
* openrisc-ibld.c: Regenerate.
* xc16x-desc.c: Regenerate.
* xc16x-desc.h: Regenerate.
2009-10-17 Doug Evans <dje@sebabeach.org>
* Makefile.am (CGEN_CPUS): Add iq2000, lm32.
(FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
sorted alphabetically.
(stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
stamp-* rules are sorted alphabetically.
* Makefile.in: Regenerate.
2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h: Use enum instead of nested macros.
2009-10-16 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c: Simplify enums.
2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
Ineiev <ineiev@gmail.com>
PR binutils/10767
* i386-dis.c: Use enum instead of nested macros.
2009-10-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (MAX_BYTEMODE): Removed.
2009-10-14 Tomas Hurka <tom@hukatronic.cz>
PR 969
* m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
2009-10-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
and vex_w_done.
2009-10-07 Michael Eager <eager@eagercon.com>
* microblaze-dis.c: Add include for microblaze-dis.h,
eliminate local extern decls.
* microblaze-dis.h: New.
2009-10-06 Nick Clifton <nickc@redhat.com>
* po/fi.po: Updated Finnish translation.
2009-10-03 Andreas Schwab <schwab@linux-m68k.org>
* opc2c.c: Include "libiberty.h" and <errno.h>.
(orig_filename): Constify.
(dump_lines): Fix line number directive.
(main): Set orig_filename to basename of input file. Use
xstrerror.
* Makefile.am (rx-dis.lo): Remove explicit dependencies.
($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
instead of $(EXEEXT).
(opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
$(LINK_FOR_BUILD). Link with libiberty.
(MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
(MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
* Makefile.in: Regenerated.
* rx-decode.c: Regenerated.
2009-10-03 Paul Reed <paulreed@paddedcell.com>
* arm-dis.c (print_insn): Check symtab_size not *symtab.
2009-10-02 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Drop Disp64 on jump and loop instructions.
* i386-tbl.h: Regenerated.
2009-10-02 Peter Bergner <bergner@vnet.ibm.com>
* ppc-dis.c (ppc_opts): Add "476" entry.
* ppc-opc.c (PPC476): Define.
(powerpc_opcodes): Update mnemonics where required for 476.
2009-10-01 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
* ppc-dis.c (ppc_opts): Likewise.
Rename "ppca2" to "a2".
2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
* crx-dis.c (match_opcode): Truncate mcode to 32-bit.
2009-09-29 DJ Delorie <dj@redhat.com>
* Makefile.am: Add RX files.
* configure.in: Add support for RX target.
* disassemble.c: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* opc2c.c: New file.
* rx-decode.c: New file.
* rx-decode.opc: New file.
* rx-dis.c: New file.
2009-09-29 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
"lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
2009-09-25 Michael Eager <eager@eagercon.com>
* microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
microblaze_decode_insn): Add declarations.
(get_delay_slots_microblaze): Remove.
2009-09-25 Martin Thuresson <martint@google.com>
Update sources to make arc and arm targets compile cleanly with
-Wc++-compat:
* arc-dis.c Fix casts.
* arc-ext.c: Add casts.
* arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
enum.
2009-09-24 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (opcode_modifiers): Remove Vex256.
(set_bitfield): Handle XXX=V.
* i386-opc.h (Vex): Update comments.
(Vex256): Removed.
(VexNDS): Updated.
(i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
* i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
* i386-tbl.h: Regenerated.
2009-09-23 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
2009-09-21 Ben Elliston <bje@au.ibm.com>
Peter Bergner <bergner@vnet.ibm.com>
* ppc-dis.c (ppc_opts): Add "ppca2" entry.
* ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
ici mnemonics.
(ERAT_T): New operand.
(XWC_MASK): New mask.
(XOPL2): New macro.
(PPCA2): Define.
2009-09-18 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
* po/vi.po: Updated Vietnamese translation.
2009-09-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
disp == -disp.
2009-09-14 Nick Clifton <nickc@redhat.com>
* po/nl.po: Updated Dutch translation.
2009-09-11 Nick Clifton <nickc@redhat.com>
* po/opcodes.pot: Updated by the Translation project.
2009-09-11 Martin Thuresson <martint@google.com>
Updated sources to compile cleanly with -Wc++-compat:
* ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
* ldcref.c: Add casts.
* ldctor.c: Add casts.
* ldexp.c
* ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
* ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
* ldlang.h (enum statement_enum): Move to top level.
* ldmain.c: Add casts.
* ldwrite.c: Add casts.
* lexsup.c: Add casts. (enum control_enum): Move to top level.
* mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-dis.c (print_insn_s390): Avoid 'long long'.
2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
(print_insn_s390): Signextend and shift pcrel operands before printing.
2009-09-09 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
VEX_LEN_AE_R_X_M_0 in comments.
2009-09-08 DJ Delorie <dj@redhat.com>
* mep-opc.c: Regenerate.
2009-09-08 Andreas Schwab <schwab@linux-m68k.org>
* z8kgen.c (struct op): Replace unused flavor with id.
(opt): Remove extra xorb entry.
(func): Use id field as fallback.
(sub): Return new string, caller changed.
(internal): Allocate end marker. Assign unique id before sorting.
(gas): Likewise. Fix loop end condition.
* z8k-opc.h: Regenerate.
2009-09-08 Alan Modra <amodra@bigpond.net.au>
* ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
2009-09-07 Alan Modra <amodra@bigpond.net.au>
* z8kgen.c (func): Fix thinko last patch.
2009-09-07 Alan Modra <amodra@bigpond.net.au>
* z8kgen.c (func): Stabilize qsort of identically named entries.
* z8k-opc.h: Regenerate.
2009-09-07 Tristan Gingold <gingold@adacore.com>
* po/opcodes.pot: Regenerate.
2009-09-07 Alan Modra <amodra@bigpond.net.au>
* configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
* configure: Regenerate.
* Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
(BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
(i386-gen, ia64-gen, z8kgen): ..here.
* Makefile.in: Regenerate.
2009-09-07 Tristan Gingold <gingold@adacore.com>
* z8k-opc.h: Regenerate.
2009-09-05 Martin Thuresson <martin@mtme.org>
* ia64-dis.c (print_insn_ia64): Update code to use renamed member.
* m88k-dis.c (m88kdis): Rename variable class to in_class.
* tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
Rename argument class to symbol_class.
2009-09-04 Jie Zhang <jie.zhang@analog.com>
* bfin-dis.c (decode_pseudodbg_assert_0): Change according
to the new encoding of DBGA, DBGAH, and DBGAL.
(_print_insn_bfin): Likewise.
2009-09-03 Jie Zhang <jie.zhang@analog.com>
* bfin-dis.c (_print_insn_bfin): Don't declare.
(print_insn_bfin): Don't declare.
(dregs_pair): Remove.
(ignore_bits): Remove.
(ccstat): Remove.
2009-09-03 Jie Zhang <jie.zhang@analog.com>
* bfin-dis.c (IS_DREG): Define.
(IS_PREG): Define.
(IS_AREG): Define.
(IS_GENREG): Define.
(IS_DAGREG): Define.
(IS_SYSREG): Define.
(decode_REGMV_0): Check illegal register move instructions.
2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
* Makefile.am (BUILD_LIBINTL): New variable.
(i386-gen$(EXEEXT_FOR_BUILD)): Use it.
(ia64-gen$(EXEEXT_FOR_BUILD)): And here.
(z8kgen$(EXEEXT_FOR_BUILD)): And here.
* Makefile.in: Regenerate.
2009-09-01 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-opc.c: Regenerate.
2009-09-01 Tristan Gingold <gingold@adacore.com>
* makefile.vms: Ported to Itanium VMS. Remove useless targets and
dependencies. Remove unused FORMAT variable.
* configure.com: New file to create build.com DCL script for
Itanium VMS or Alpha VMS.
2009-08-29 Martin Thuresson <martin@mtme.org>
* cris-dis.c (bytes_to_skip): Update code to use new name.
* i386-dis.c (putop): Update code to use new name.
* i386-gen.c (process_i386_opcodes): Update code to use
new name.
* i386-opc.h (struct template): Rename struct template to
insn_template. Update code accordingly.
* i386-tbl.h (i386_optab): Update type to use new name.
* ia64-dis.c (print_insn_ia64): Rename variable template
to template_val.
* tic30-dis.c (struct instruction, get_tic30_instruction):
Update code to use new name.
* tic54x-dis.c (has_lkaddr, get_insn_size)
(print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
Update code to use new name.
* tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
Update type to new name.
* z8kgen.c (internal, gas): Rename variable new to new_op.
2009-08-28 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
(LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
* Makefile.in: Regenerated.
2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
[INSTALL_LIBBFD]: ... here, ...
[INSTALL_LIBBFD]: ... and empty overrides here.
[!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
[!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
* Makefile.in: Regenerate.
* configure: Regenerate.
2009-08-26 Philippe De Muyter <phdm@macqel.be>
* m68k-dis.c (print_insn_arg): Add movecr register names for
coldfire v4e families.
2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (SUBDIRS): Build '.' before 'po'.
(COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
(MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
(i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
(i386-gen.o): New rule.
($(srcdir)/i386-init.h): Adjust.
(i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
(ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
(ia64-gen.o): New rule.
(ia64_asmtab_deps): New variable.
($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
(ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
(s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
likewise.
(s390-opc.tab): Adjust.
(z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
rules.
(z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
* Makefile.in: Regenerate.
* z8kgen.c (gas): Avoid '/*' in comment.
* z8k-opc.h (func): Regenerate.
2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
msp430-dis.c added.
(LIBOPCODES_CFILES): New variable, adding to
TARGET_LIBOPCODES_CFILES also non-target library sources.
(CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
files.
(ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
(EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
[INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
[INSTALL_LIBBFD] (bfdinclude_DATA): New.
[!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
[!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
is built shared even if it is not to be installed.
(install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
(install_libopcodes, uninstall_libopcodes): Remove.
(AM_CPPFLAGS): Renamed from ...
(INCLUDES): ... this.
* Makefile.in: Regenerate.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
1.11, foreign, no-dist.
(MKDEP, m32c_opc_h): Remove variables.
(disassemble.lo): Rewrite using automake-style dependency
tracking rules; only list the dependency upon the primary source
file, but no included headers.
(m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
(i386-gen.o, ia64-gen.o): Remove dependency statements.
(EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
ensure all dependency fragments are included in the Makefile.
(s390-opc.lo): Depend on s390-opc.tab.
(DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
(mkdep section): Remove.
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
* Makefile.in: Regenerate.
* aclocal.m4: Likewise.
* config.in: Likewise.
* configure: Likewise.
2009-08-06 Michael Eager <eager@eagercon.com>
* Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
* Makefile.in: Regenerate.
* configure.in: Add bfd_microblaze_arch target.
* configure: Regenerate.
* disassemble.c: Define ARCH_microblaze, return
print_insn_microblaze().
* microblaze-dis.c: New MicroBlaze disassembler.
* microblaze-opc.h: New MicroBlaze opcode definitions.
* microblaze-opcm.h: New MicroBlaze opcode types.
2009-07-25 H.J. Lu <hongjiu.lu@intel.com>
* configure.in: Handle bfd_l1om_arch.
* disassemble.c (disassembler): Likewise.
* configure: Regenerated.
* i386-dis.c (print_insn): Handle bfd_mach_l1om and
bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
* i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
Add CPU_L1OM_FLAGS.
(cpu_flags): Add CpuL1OM.
(set_bitfield): Take an argument to set the value field.
(process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
(process_i386_opcode_modifier): Updated.
(process_i386_operand_type): Likewise.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
* i386-opc.h (CpuL1OM): New.
(CpuXsave): Updated.
(i386_cpu_flags): Add cpul1om.
2009-07-24 Jan Beulich <jbeulich@novell.com>
* i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
frstpm.
* i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
(cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
(set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
* i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
Define.
(union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
and cpufisttp.
* i386-opc.tbl: Qualify floating point instructions by their
respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
and fsincos to be avilable only on 387. Fix fstsw ax to be
available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
and frstpm.
* i386-init.h, i386-tbl.h: Regenerate.
2009-07-20 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
offset or indexed based addressing mode 3.
2009-07-14 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
patterns.
(arm_decode_shift): Catch illegal register based shifts.
(print_insn_arm): Properly handle negative register r0
post-indexed addressing.
2009-07-10 Doug Kwan <dougkwan@google.com>
* arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
lower 32 bits of long types to make hexadecimal output consistent
on both 32-bit and 64-bit hosts.
2009-07-10 Alan Modra <amodra@bigpond.net.au>
* fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
* frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
* ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
* iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
* lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
* lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
* m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
* m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
* mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
* openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
* xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
* xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
* arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
2009-07-07 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (arm_opcodes): Be more strict about decoding scaled
addressing modes.
2009-07-06 DJ Delorie <dj@redhat.com>
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
* i386-opc.h (CpuFMA4): Add CpuFMA4.
(i386_cpu_flags): New.
* i386-gen.c: Add CPU_FMA4_FLAGS.
* i386-opc.tbl: Add FMA4 instructions.
* i386-tbl.h: Regenerate.
* i386-init.h: Regenerate.
* i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
(OP_XMM_VexW): Ditto.
(OP_EX_VexW): Ditto.
(VEXI4_Fixup): Ditto.
(VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
(PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
(PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
(PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
(PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
(PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
(PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
(PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
(VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
(VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
(VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
(get_vex_imm8): New. handle FMA4.
(OP_EX_VexReg): Ditto.
2009-06-30 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (coprocessor): Print the LDC and STC versions of the
LFM and SFM instructions as comments,.
Improve consistency of formatting for instructions displayed as
comments and decimal values displayed with their hexadecimal
equivalents.
Formatting tidy ups.
2009-06-29 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (enum opcode_sentinels): New: Used to mark the
boundary between variaant and generic coprocessor instuctions.
(coprocessor): Use it.
Fix architecture version of MCRR and MRRC instructions.
(arm_opcdes): Fix patterns for STRB and STRH instructions.
(print_insn_coprocessor): Check architecture and extension masks.
Print a hexadecimal version of any decimal constant that is
outside of the range of -16 to +32.
(print_arm_address): Add a return value of the offset used in the
adress, if it is worth printing a hexadecimal version of it.
(print_insn_neon): Print a hexadecimal version of any decimal
constant that is outside of the range of -16 to +32.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
PR 10297
* arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
of an undefined instruction.
(arm_opcodes): Use it.
(thumb_opcod): Use it.
(thumb32_opc): Use it.
2009-06-23 DJ Delorie <dj@redhat.com>
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-asm.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-06-22 Nick Clifton <nickc@redhat.com>
* po/fi.po: Updated Finish translation.
2009-06-22 Alan Modra <amodra@bigpond.net.au>
* m32c-asm.c: Regenerate.
2009-06-22 Alan Modra <amodra@bigpond.net.au>
* score-dis.c (print_insn_score48, print_insn_score32): Move default
case label to proper lexical block.
* score7-dis.c (print_insn_score32): Likewise.
2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
* s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
* s390-opc.txt (nopr, nop): Use new instruction format.
2009-06-18 Nick Clifton <nickc@redhat.com>
PR 10288
* arm-dis.c (print_insn_coprocessor): Check that a user specified
ARM architecture supports the matched instruction.
(print_insn_arm): Likewise.
(select_arm_features): New function. Fills in the fields of an
arm_feature_set structure based on a given arm machine number.
(print_insn): Initialise an arm_feature_set structure.
2009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
* vax-dis.c (is_function_entry): Return success for synthetic
symbols too.
(is_plt_tail): New function.
(print_insn_vax): Decode PLT entry offset longword.
2009-06-15 Nick Clifton <nickc@redhat.com>
PR 10186
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
PR 10173
* cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
2009-06-15 Nick Clifton <nickc@redhat.com>
PR 10263
* arm-dis.c (print_insn): Ignore is_data if the user has requested
the disassembly of data as well as instructions.
2009-06-11 Doug Evans <dje@sebabeach.org>
* cgen.sh: Handle multiple simultaneous runs for parallel makes.
2009-06-11 Anthony Green <green@moxielogic.com>
* moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
(moxie_form3_opc_info): Add branch instructions.
* moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
encoded instructions.
2009-06-06 Anthony Green <green@moxielogic.com>
* moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
* moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
2009-06-04 Alan Modra <amodra@bigpond.net.au>
* dep-in.sed: Don't use \n in replacement part of s command.
* Makefile.am (DEP1): LC_ALL for uniq.
* Makefile.in: Regenerate.
2009-06-02 Nick Clifton <nickc@redhat.com>
* po/nl.po: Updated Dutch translation.
2009-06-02 Tristan Gingold <gingold@adacore.com>
* ia64-gen.c (parse_resource_users, print_dependency_table,
add_dis_table_ent, finish_distable, insert_bit_table_ent,
add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
insert_completer_entry, print_completer_entry, print_completer_table,
opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
2009-05-28 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
2009-05-26 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-05-26 Nick Clifton <nickc@redhat.com>
* po/id.po: Updated Indonesian translation.
* po/opcodes.pot: Updated template file.
2009-05-26 Alan Modra <amodra@bigpond.net.au>
* dep-in.sed: Don't modify .o to .lo here. Output one filename
per line with all lines having continuation backslash. Prefix
first line with "A", following lines with "B".
* Makefile.am (DEP): Don't use dep.sed here.
(DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
dep.sed here on dependencies, sort and uniq.
* Makefile.in: Regenerate.
2009-05-25 Tristan Gingold <gingold@adacore.com>
* makefile.vms (OPT): New variable.
(CFLAGS): Update compilation flags.
2009-05-22 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
* i386-opc.h (Cpusse5): Delete.
(i386_cpu_flags): Delete.
* i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
* i386-opc.tbl: Remove SSE5 instructions.
* i386-tbl.h: Regenerate.
* i386-init.h: Regenerate.
* i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
(print_drex_arg): Delete.
(OP_DREX4): Delete.
(OP_DREX3): Delete.
(OP_DREX_ICMP): Delete.
(OP_DREX_FCMP): Delete.
(DREX_*): Delete.
(THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
2009-05-22 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2009-05-19 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-opc.c: Regenerate.
2009-04-30 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-04-17 DJ Delorie <dj@redhat.com
* mep-desc.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-04-15 Anthony Green <green@moxielogic.com>
* moxie-opc.c, moxie-dis.c: Created.
* Makefile.am: Build the moxie source files.
* configure.in: Add moxie support.
* Makefile.in, configure: Rebuilt.
* disassemble.c (disassembler): Add moxie support.
(ARCH_moxie): Define.
2009-04-15 Jan Beulich <jbeulich@novell.com>
* i386-opc.tbl (protb, protw, protd, protq): Set opcode
extension to None.
(pshab, pshaw, pshad, pshaq): Likewise.
* i386-tbl.h: Re-generate.
2009-04-08 DJ Delorie <dj@redhat.com
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-04-07 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
Reorder entries so the extended mnemonics are listed before tlbilx.
2009-04-02 Peter Bergner <bergner@vnet.ibm.com>
* ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
due to -many/-Many.
(print_insn_powerpc): Make sure we only deprecate instructions using
the original dialect and not a modified dialect due to -Many handling.
Move the handling of the condition register and default operands to
the end of the if/else if/else chain.
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
<"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
that have instructions with conflicting opcodes.
2009-04-01 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
E500MC entries.
2009-04-01 Christophe Lyon <christophe.lyon@st.com>
* arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
2009-03-30 Joseph Myers <joseph@codesourcery.com>
* arm-dis.c (print_insn): Also check section matches in backwards
search for mapping symbol.
2009-03-26 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (get_valid_dis386): Abort on unhandled table.
2009-03-18 Alan Modra <amodra@bigpond.net.au>
* cgen-opc.c: Include alloca-conf.h rather than alloca.h.
* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* openrisc-opc.c: Regenerate.
2009-03-10 Nick Clifton <nickc@redhat.com>
* po/id.po: Updated Indonesian translation.
2009-03-10 Alan Modra <amodra@bigpond.net.au>
* ppc-dis.c: Include "opintl.h".
(struct ppc_mopt, ppc_opts): New.
(ppc_parse_cpu): New function.
(powerpc_init_dialect): Use it.
(print_ppc_disassembler_options): Dump options from ppc_opts.
Internationalize message.
2009-03-06 Nick Clifton <nickc@redhat.com>
* po/es.po: Updated Spanish translation.
2009-03-04 Alan Modra <amodra@bigpond.net.au>
PR 6768
* configure.in: Test for ld --as-needed support. Link shared
libopcodes against libm.
* configure: Regenerate.
2009-03-03 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
instructions from newer processors are listed before older ones.
2009-03-03 Alan Modra <amodra@bigpond.net.au>
* Makefile.am: Run "make dep-am".
(HFILES): Move lm32-desc.h and lm32-opc.h from..
(CFILES): ..here.
* Makefile.in: Regenerate.
2009-03-02 Qinwei <qinwei@sunnorth.com.cn>
* score7-dis.c: New file.
* Makefile.am: Add dependencies for score7-dis.c.
* Makefile.in: Regenerate.
* configure.in: Add score7-dis to score files.
* configure: Regenerate.
* score-dis.c: Add support for score7 architecture.
* score-opc.h: Likewise.
2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure: Regenerate.
2009-02-27 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
2009-02-26 Peter Bergner <bergner@vnet.ibm.com>
* ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
the power7 and the isel instructions.
* ppc-opc.c (insert_xc6, extract_xc6): New static functions.
(insert_dm, extract_dm): Likewise.
(XB6): Update comment to include XX2 form.
(WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
(RemoveXX3DM): Delete.
(powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
"mftgpr">: Deprecate for POWER7.
<"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
"frsqrte.">: Deprecate the three operand form and enable the two
operand form for POWER7 and later.
<"wait">: Extend to accept optional parameter. Enable for POWER7.
<"waitsrv", "waitimpl">: Add extended opcodes.
<"ldbrx", "stdbrx">: Enable for POWER7.
<"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
<"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
"divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
"divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
"divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
"fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
"fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
"lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
<"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
"stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
"xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
"xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
"xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
"xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
"xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
"xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
"xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
"xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
"xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
"xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
"xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
"xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
"xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
"xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
"xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
"xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
"xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
"xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
"xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
"xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
"xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
"xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
"xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
"xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
"xxspltw", "xxswapd">: Add VSX opcodes.
2009-02-23 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
(operand_types): Remove Vex_Imm4.
* i386-opc.h (Vex_Imm4): Removed.
(OTMax): Updated.
(i386_operand_type): Remove vex_imm4.
* i386-opc.tbl: Remove Vex_Imm4 comments.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2009-02-23 Richard Earnshaw <rearnsha@arm.com>
* arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
vq{r}shr{u}n.s64 insnstructions.
2009-02-19 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
operand to be a float point register (FRT/FRS).
2009-02-18 Adam Nemet <anemet@caviumnetworks.com>
* mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
dmfc2 and dmtc2 before the architecture-level variants.
2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
* fr30-opc.c: Regenerate.
* frv-opc.c: Regenerate.
* ip2k-opc.c: Regenerate.
* iq2000-opc.c: Regenerate.
* lm32-opc.c: Regenerate.
* m32c-opc.c: Regenerate.
* m32r-opc.c: Regenerate.
* mep-opc.c: Regenerate.
* mt-opc.c: Regenerate.
* xc16x-opc.c: Regenerate.
* xstormy16-opc.c: Regenerate.
* tic54x-dis.c (print_instruction): Avoid compiler warning on
sprintf call.
2009-02-12 Nathan Sidwell <nathan@codesourcery.com>
* m68k-opc.c (m68k_opcodes): Add stldsr instruction.
2009-02-05 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c: Update copyright year.
(powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
ordering for POWER4 and later and use the correct Server ordering.
2009-02-04 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (January, 2009)
* i386-dis.c (PREFIX_VEX_3A44): New.
(VEX_LEN_3A44_P_2): Likewise.
(PREFIX_VEX_3A48): Updated.
(VEX_LEN_3A4C_P_2): Likewise.
(prefix_table): Add PREFIX_VEX_3A44.
(vex_table): Likewise.
(vex_len_table): Add VEX_LEN_3A44_P_2.
* i386-opc.tbl: Add PCLMUL + AVX instructions.
* i386-tbl.h: Regenerated.
2009-02-03 Sandip Matte <sandip@rmicorp.com>
* mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
(mips_arch_choices): Add XLR entry.
* mips-opc.c (XLR): Define.
(mips_builtin_opcodes): Add XLR instructions.
2009-02-03 Carlos O'Donell <carlos@codesourcery.com>
* Makefile.am: Add install-pdf target.
* po/Make-in: Add install-pdf target.
* Makefile.in: Regenerate.
2009-02-02 DJ Delorie <dj@redhat.com>
* mep-asm.c: Regenerate.
* mep-desc.c: Regenerate.
* mep-desc.h: Regenerate.
* mep-dis.c: Regenerate.
* mep-ibld.c: Regenerate.
* mep-opc.c: Regenerate.
* mep-opc.h: Regenerate.
2009-01-29 Mark Mitchell <mark@codesourcery.com>
* arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
qsub, and qdsub.
2009-01-28 Chao-ying Fu <fu@mips.com>
* mips-opc.c (suxc1): Add the flag of FP_D.
2009-01-20 Alan Modra <amodra@bigpond.net.au>
* fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
* frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
* iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
* m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
* m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
* mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
* openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
* xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
2009-01-16 Alan Modra <amodra@bigpond.net.au>
* configure.in (commonbfdlib): Delete.
(SHARED_LIBADD): Add pic libiberty if such is available.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2009-01-14 Peter Bergner <bergner@vnet.ibm.com>
* ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
* ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
operand form and enable the four operand form for POWER6 and later.
<mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
three operand form for POWER6 and later.
2009-01-14 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (OUTS): Use "%s" as format string.
2009-01-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Remove a white space.
(operand_type_init): Likewise.
2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
* i386-tbl.h: Regenerated.
2009-01-12 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
subS, xorS and cmpS.
2009-01-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
(cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
and CpuSYSCALL.
(lineno): Removed.
(set_bitfield): Take an argument, lineno. Don't report lineno
on error if it is -1.
(process_i386_cpu_flag): Take an argument, lineno.
(process_i386_opcode_modifier): Likewise.
(process_i386_operand_type): Likewise.
(output_i386_opcode): Likewise.
(opcode_hash_entry): Add lineno.
(process_i386_opcodes): Updated.
(process_i386_registers): Likewise.
(process_i386_initializers): Likewise.
* i386-opc.h (CpuP4): Removed.
(CpuK6): Likewise.
(CpuK8): Likewise.
(CpuClflush): New.
(CpuSYSCALL): Likewise.
(CpuMMX): Updated.
(i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
cpuclflush and cpusyscall.
* i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
syscall and sysret.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2009-01-09 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
(cpu_flags): Add CpuRdtscp.
(set_bitfield): Remove CpuSledgehammer check.
* i386-opc.h (CpuRdtscp): New.
(CpuLM): Updated.
(i386_cpu_flags): Add cpurdtscp.
* i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2009-01-09 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (PPCNONE): Define.
(NOPOWER4): Delete.
(powerpc_opcodes): Initialize the new "deprecated" field.
2009-01-06 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (December, 2008)
* i386-dis.c (VEX_LEN_2B_M_0): Removed.
(VEX_LEN_E7_P_2_M_0): Likewise.
(VEX_LEN_2C_P_1): Updated.
(VEX_LEN_E8_P_2): Likewise.
(vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
(mod_table): Likewise.
* i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
* i386-tbl.h: Regenerated.
2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
* i386-gen.c (process_copyright): Update for 2009.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
AVX Programming Reference (December, 2008)
* i386-dis.c (OP_VEX_FMA): Removed.
(OP_EX_VexW): Likewise.
(OP_EX_VexImmW): Likewise.
(OP_XMM_VexW): Likewise.
(VEXI4_Fixup): Likewise.
(VPERMIL2_Fixup): Likewise.
(VexI4): Likewise.
(VexFMA): Likewise.
(Vex128FMA): Likewise.
(EXVexW): Likewise.
(EXdVexW): Likewise.
(EXqVexW): Likewise.
(EXVexImmW): Likewise.
(XMVexW): Likewise.
(VPERMIL2): Likewise.
(PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
(PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
(PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
(PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
(VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
(VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
(get_vex_imm8): Likewise.
(OP_EX_VexReg): Likewise.
vpermil2_op): Likewise.
(EXVexWdq): New.
(vex_w_dq_mode): Likewise.
(PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
(PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
(PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
(es_reg): Updated.
(PREFIX_VEX_38DB): Likewise.
(PREFIX_VEX_3A4A): Likewise.
(PREFIX_VEX_3A60): Likewise.
(PREFIX_VEX_3ADF): Likewise.
(VEX_LEN_3ADF_P_2): Likewise.
(prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
PREFIX_VEX_3896...PREFIX_VEX_389F,
PREFIX_VEX_38A6...PREFIX_VEX_38AF and
PREFIX_VEX_38B6...PREFIX_VEX_38BF.
(vex_table): Likewise.
(vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
(putop): Support "%XW".
(intel_operand_size): Handle vex_w_dq_mode.
* i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
* i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
instructions. Add new FMA instructions.
* i386-tbl.h: Regenerated.
2009-01-02 Matthias Klose <doko@ubuntu.com>
* or32-opc.c (or32_print_register, or32_print_immediate,
disassemble_insn): Don't rely on undefined sprintf behaviour.
For older changes see ChangeLog-2008
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: