old-cross-binutils/gdb/objfiles.c
Jim Kingdon 100f92e2de * Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts
which no longer occur.

	gcc -Wall lint:
	* findvar.c (symbol_read_needs_frame), corelow.c (ignore),
	inflow.c (gdb_has_a_terminal): Make sure to return a value.
	* regex.h: Declare re_set_syntax.
	* printcmd.c: Include valprint.h.
	* infcmd.c, exec.c, maint.c, core.c: Include language.h.
	* maint.c: Include expression.h.
	* infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h.
	* inftarg.c: Include command.h.
	* coredep.c: Include value.h.
	* c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h.
	* ch-typeprint.c: Include typeprint.h.
	* ch-valprint.c: Include c-lang.h.
	* nlmread.c: Include buildsym.h.
	* environ.c: Include gdbcore.h.  Only include defs.h once.
	(set_in_environ): Cast const char * to char * when passing to
	set_gnutarget.
	Remove unused variables:
	* printcmd.c (printf_command): args_to_vprintf.
	* coffread.c (coff_symfile_init): strsection.
	Move variables to within the #ifdefs where they are used:
	* symtab.c (gdb_mangle_name): opname.
	* inftarg.c (child_attach): pid and exec_file.
	* inftarg.c (child_detach): siggnal.
	* objfiles.c (allocate_objfile): mapto, md, and fd.
	* objfiles.c (free_objfile): mmfd.
	* infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch.
	* infrun.c (wait_for_inferior): Remove unused same_pid label.
	* inferior.h: Declare set_sigint_trap and clear_sigint_trap.
	* parser-defs.h: Declare write_exp_elt_block.
	* stabsread.h: Declare elfstab_offset_sections and
	coffstab_build_psymtabs.
1993-10-21 20:41:50 +00:00

782 lines
23 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* GDB routines for manipulating objfiles.
Copyright 1992 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* This file contains support routines for creating, manipulating, and
destroying objfile structures. */
#include "defs.h"
#include "bfd.h" /* Binary File Description */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
#include "gdb-stabs.h"
#include "target.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <obstack.h>
/* Prototypes for local functions */
#if !defined(NO_MMALLOC) && defined(HAVE_MMAP)
static int
open_existing_mapped_file PARAMS ((char *, long, int));
static int
open_mapped_file PARAMS ((char *filename, long mtime, int mapped));
static CORE_ADDR
map_to_address PARAMS ((void));
#endif /* !defined(NO_MMALLOC) && defined(HAVE_MMAP) */
/* Message to be printed before the error message, when an error occurs. */
extern char *error_pre_print;
/* Externally visible variables that are owned by this module.
See declarations in objfile.h for more info. */
struct objfile *object_files; /* Linked list of all objfiles */
struct objfile *current_objfile; /* For symbol file being read in */
struct objfile *symfile_objfile; /* Main symbol table loaded from */
int mapped_symbol_files; /* Try to use mapped symbol files */
/* Locate all mappable sections of a BFD file.
objfile_p_char is a char * to get it through
bfd_map_over_sections; we cast it back to its proper type. */
static void
add_to_objfile_sections (abfd, asect, objfile_p_char)
bfd *abfd;
sec_ptr asect;
PTR objfile_p_char;
{
struct objfile *objfile = (struct objfile *) objfile_p_char;
struct obj_section section;
flagword aflag;
aflag = bfd_get_section_flags (abfd, asect);
/* FIXME, we need to handle BSS segment here...it alloc's but doesn't load */
if (!(aflag & SEC_LOAD))
return;
if (0 == bfd_section_size (abfd, asect))
return;
section.offset = 0;
section.objfile = objfile;
section.sec_ptr = asect;
section.addr = bfd_section_vma (abfd, asect);
section.endaddr = section.addr + bfd_section_size (abfd, asect);
obstack_grow (&objfile->psymbol_obstack, &section, sizeof(section));
objfile->sections_end = (struct obj_section *) (((unsigned long) objfile->sections_end) + 1);
}
/* Builds a section table for OBJFILE.
Returns 0 if OK, 1 on error. */
static int
build_objfile_section_table (objfile)
struct objfile *objfile;
{
if (objfile->sections)
abort();
objfile->sections_end = 0;
bfd_map_over_sections (objfile->obfd, add_to_objfile_sections, (char *)objfile);
objfile->sections = (struct obj_section *)
obstack_finish (&objfile->psymbol_obstack);
objfile->sections_end = objfile->sections + (unsigned long) objfile->sections_end;
return(0);
}
/* Given a pointer to an initialized bfd (ABFD) and a flag that indicates
whether or not an objfile is to be mapped (MAPPED), allocate a new objfile
struct, fill it in as best we can, link it into the list of all known
objfiles, and return a pointer to the new objfile struct. */
struct objfile *
allocate_objfile (abfd, mapped)
bfd *abfd;
int mapped;
{
struct objfile *objfile = NULL;
mapped |= mapped_symbol_files;
#if !defined(NO_MMALLOC) && defined(HAVE_MMAP)
{
/* If we can support mapped symbol files, try to open/reopen the
mapped file that corresponds to the file from which we wish to
read symbols. If the objfile is to be mapped, we must malloc
the structure itself using the mmap version, and arrange that
all memory allocation for the objfile uses the mmap routines.
If we are reusing an existing mapped file, from which we get
our objfile pointer, we have to make sure that we update the
pointers to the alloc/free functions in the obstack, in case
these functions have moved within the current gdb. */
int fd;
fd = open_mapped_file (bfd_get_filename (abfd), bfd_get_mtime (abfd),
mapped);
if (fd >= 0)
{
CORE_ADDR mapto;
PTR md;
if (((mapto = map_to_address ()) == 0) ||
((md = mmalloc_attach (fd, (PTR) mapto)) == NULL))
{
close (fd);
}
else if ((objfile = (struct objfile *) mmalloc_getkey (md, 0)) != NULL)
{
/* Update memory corruption handler function addresses. */
init_malloc (md);
objfile -> md = md;
objfile -> mmfd = fd;
/* Update pointers to functions to *our* copies */
obstack_chunkfun (&objfile -> psymbol_obstack, xmmalloc);
obstack_freefun (&objfile -> psymbol_obstack, mfree);
obstack_chunkfun (&objfile -> symbol_obstack, xmmalloc);
obstack_freefun (&objfile -> symbol_obstack, mfree);
obstack_chunkfun (&objfile -> type_obstack, xmmalloc);
obstack_freefun (&objfile -> type_obstack, mfree);
/* If already in objfile list, unlink it. */
unlink_objfile (objfile);
/* Forget things specific to a particular gdb, may have changed. */
objfile -> sf = NULL;
}
else
{
/* Set up to detect internal memory corruption. MUST be
done before the first malloc. See comments in
init_malloc() and mmcheck(). */
init_malloc (md);
objfile = (struct objfile *)
xmmalloc (md, sizeof (struct objfile));
memset (objfile, 0, sizeof (struct objfile));
objfile -> md = md;
objfile -> mmfd = fd;
objfile -> flags |= OBJF_MAPPED;
mmalloc_setkey (objfile -> md, 0, objfile);
obstack_specify_allocation_with_arg (&objfile -> psymbol_obstack,
0, 0, xmmalloc, mfree,
objfile -> md);
obstack_specify_allocation_with_arg (&objfile -> symbol_obstack,
0, 0, xmmalloc, mfree,
objfile -> md);
obstack_specify_allocation_with_arg (&objfile -> type_obstack,
0, 0, xmmalloc, mfree,
objfile -> md);
}
}
if (mapped && (objfile == NULL))
{
warning ("symbol table for '%s' will not be mapped",
bfd_get_filename (abfd));
}
}
#else /* defined(NO_MMALLOC) || !defined(HAVE_MMAP) */
if (mapped)
{
warning ("this version of gdb does not support mapped symbol tables.");
/* Turn off the global flag so we don't try to do mapped symbol tables
any more, which shuts up gdb unless the user specifically gives the
"mapped" keyword again. */
mapped_symbol_files = 0;
}
#endif /* !defined(NO_MMALLOC) && defined(HAVE_MMAP) */
/* If we don't support mapped symbol files, didn't ask for the file to be
mapped, or failed to open the mapped file for some reason, then revert
back to an unmapped objfile. */
if (objfile == NULL)
{
objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
memset (objfile, 0, sizeof (struct objfile));
objfile -> md = NULL;
obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0, xmalloc,
free);
obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0, xmalloc,
free);
obstack_specify_allocation (&objfile -> type_obstack, 0, 0, xmalloc,
free);
}
/* Update the per-objfile information that comes from the bfd, ensuring
that any data that is reference is saved in the per-objfile data
region. */
objfile -> obfd = abfd;
if (objfile -> name != NULL)
{
mfree (objfile -> md, objfile -> name);
}
objfile -> name = mstrsave (objfile -> md, bfd_get_filename (abfd));
objfile -> mtime = bfd_get_mtime (abfd);
/* Build section table. */
if (build_objfile_section_table (objfile))
{
error ("Can't find the file sections in `%s': %s",
objfile -> name, bfd_errmsg (bfd_error));
}
/* Push this file onto the head of the linked list of other such files. */
objfile -> next = object_files;
object_files = objfile;
return (objfile);
}
/* Unlink OBJFILE from the list of known objfiles, if it is found in the
list.
It is not a bug, or error, to call this function if OBJFILE is not known
to be in the current list. This is done in the case of mapped objfiles,
for example, just to ensure that the mapped objfile doesn't appear twice
in the list. Since the list is threaded, linking in a mapped objfile
twice would create a circular list.
If OBJFILE turns out to be in the list, we zap it's NEXT pointer after
unlinking it, just to ensure that we have completely severed any linkages
between the OBJFILE and the list. */
void
unlink_objfile (objfile)
struct objfile *objfile;
{
struct objfile** objpp;
for (objpp = &object_files; *objpp != NULL; objpp = &((*objpp) -> next))
{
if (*objpp == objfile)
{
*objpp = (*objpp) -> next;
objfile -> next = NULL;
break;
}
}
}
/* Destroy an objfile and all the symtabs and psymtabs under it. Note
that as much as possible is allocated on the symbol_obstack and
psymbol_obstack, so that the memory can be efficiently freed.
Things which we do NOT free because they are not in malloc'd memory
or not in memory specific to the objfile include:
objfile -> sf
FIXME: If the objfile is using reusable symbol information (via mmalloc),
then we need to take into account the fact that more than one process
may be using the symbol information at the same time (when mmalloc is
extended to support cooperative locking). When more than one process
is using the mapped symbol info, we need to be more careful about when
we free objects in the reusable area. */
void
free_objfile (objfile)
struct objfile *objfile;
{
/* First do any symbol file specific actions required when we are
finished with a particular symbol file. Note that if the objfile
is using reusable symbol information (via mmalloc) then each of
these routines is responsible for doing the correct thing, either
freeing things which are valid only during this particular gdb
execution, or leaving them to be reused during the next one. */
if (objfile -> sf != NULL)
{
(*objfile -> sf -> sym_finish) (objfile);
}
/* We always close the bfd. */
if (objfile -> obfd != NULL)
{
char *name = bfd_get_filename (objfile->obfd);
bfd_close (objfile -> obfd);
free (name);
}
/* Remove it from the chain of all objfiles. */
unlink_objfile (objfile);
/* Before the symbol table code was redone to make it easier to
selectively load and remove information particular to a specific
linkage unit, gdb used to do these things whenever the monolithic
symbol table was blown away. How much still needs to be done
is unknown, but we play it safe for now and keep each action until
it is shown to be no longer needed. */
#if defined (CLEAR_SOLIB)
CLEAR_SOLIB ();
/* CLEAR_SOLIB closes the bfd's for any shared libraries. But
the to_sections for a core file might refer to those bfd's. So
detach any core file. */
{
struct target_ops *t = find_core_target ();
if (t != NULL)
(t->to_detach) (NULL, 0);
}
#endif
clear_pc_function_cache ();
/* The last thing we do is free the objfile struct itself for the
non-reusable case, or detach from the mapped file for the reusable
case. Note that the mmalloc_detach or the mfree is the last thing
we can do with this objfile. */
#if !defined(NO_MMALLOC) && defined(HAVE_MMAP)
if (objfile -> flags & OBJF_MAPPED)
{
/* Remember the fd so we can close it. We can't close it before
doing the detach, and after the detach the objfile is gone. */
int mmfd;
mmfd = objfile -> mmfd;
mmalloc_detach (objfile -> md);
objfile = NULL;
close (mmfd);
}
#endif /* !defined(NO_MMALLOC) && defined(HAVE_MMAP) */
/* If we still have an objfile, then either we don't support reusable
objfiles or this one was not reusable. So free it normally. */
if (objfile != NULL)
{
if (objfile -> name != NULL)
{
mfree (objfile -> md, objfile -> name);
}
if (objfile->global_psymbols.list)
mfree (objfile->md, objfile->global_psymbols.list);
if (objfile->static_psymbols.list)
mfree (objfile->md, objfile->static_psymbols.list);
/* Free the obstacks for non-reusable objfiles */
obstack_free (&objfile -> psymbol_obstack, 0);
obstack_free (&objfile -> symbol_obstack, 0);
obstack_free (&objfile -> type_obstack, 0);
mfree (objfile -> md, objfile);
objfile = NULL;
}
}
/* Free all the object files at once and clean up their users. */
void
free_all_objfiles ()
{
struct objfile *objfile, *temp;
ALL_OBJFILES_SAFE (objfile, temp)
{
free_objfile (objfile);
}
clear_symtab_users ();
}
/* Relocate OBJFILE to NEW_OFFSETS. There should be OBJFILE->NUM_SECTIONS
entries in new_offsets. */
void
objfile_relocate (objfile, new_offsets)
struct objfile *objfile;
struct section_offsets *new_offsets;
{
struct section_offsets *delta = (struct section_offsets *) alloca
(sizeof (struct section_offsets)
+ objfile->num_sections * sizeof (delta->offsets));
{
int i;
int something_changed = 0;
for (i = 0; i < objfile->num_sections; ++i)
{
ANOFFSET (delta, i) =
ANOFFSET (new_offsets, i) - ANOFFSET (objfile->section_offsets, i);
if (ANOFFSET (delta, i) != 0)
something_changed = 1;
}
if (!something_changed)
return;
}
/* OK, get all the symtabs. */
{
struct symtab *s;
for (s = objfile->symtabs; s; s = s->next)
{
struct linetable *l;
struct blockvector *bv;
int i;
/* First the line table. */
l = LINETABLE (s);
if (l)
{
for (i = 0; i < l->nitems; ++i)
l->item[i].pc += ANOFFSET (delta, s->block_line_section);
}
/* Don't relocate a shared blockvector more than once. */
if (!s->primary)
continue;
bv = BLOCKVECTOR (s);
for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); ++i)
{
struct block *b;
int j;
b = BLOCKVECTOR_BLOCK (bv, i);
BLOCK_START (b) += ANOFFSET (delta, s->block_line_section);
BLOCK_END (b) += ANOFFSET (delta, s->block_line_section);
for (j = 0; j < BLOCK_NSYMS (b); ++j)
{
struct symbol *sym = BLOCK_SYM (b, j);
/* The RS6000 code from which this was taken skipped
any symbols in STRUCT_NAMESPACE or UNDEF_NAMESPACE.
But I'm leaving out that test, on the theory that
they can't possibly pass the tests below. */
if ((SYMBOL_CLASS (sym) == LOC_LABEL
|| SYMBOL_CLASS (sym) == LOC_STATIC)
&& SYMBOL_SECTION (sym) >= 0)
{
SYMBOL_VALUE_ADDRESS (sym) +=
ANOFFSET (delta, SYMBOL_SECTION (sym));
}
}
}
}
}
{
struct partial_symtab *p;
ALL_OBJFILE_PSYMTABS (objfile, p)
{
/* FIXME: specific to symbol readers which use gdb-stabs.h.
We can only get away with it since objfile_relocate is only
used on XCOFF, which lacks psymtabs, and for gdb-stabs.h
targets. */
p->textlow += ANOFFSET (delta, SECT_OFF_TEXT);
p->texthigh += ANOFFSET (delta, SECT_OFF_TEXT);
}
}
{
struct partial_symbol *psym;
for (psym = objfile->global_psymbols.list;
psym < objfile->global_psymbols.next;
psym++)
if (SYMBOL_SECTION (psym) >= 0)
SYMBOL_VALUE_ADDRESS (psym) += ANOFFSET (delta, SYMBOL_SECTION (psym));
for (psym = objfile->static_psymbols.list;
psym < objfile->static_psymbols.next;
psym++)
if (SYMBOL_SECTION (psym) >= 0)
SYMBOL_VALUE_ADDRESS (psym) += ANOFFSET (delta, SYMBOL_SECTION (psym));
}
{
struct minimal_symbol *msym;
ALL_OBJFILE_MSYMBOLS (objfile, msym)
if (SYMBOL_SECTION (msym) >= 0)
SYMBOL_VALUE_ADDRESS (msym) += ANOFFSET (delta, SYMBOL_SECTION (msym));
}
{
int i;
for (i = 0; i < objfile->num_sections; ++i)
ANOFFSET (objfile->section_offsets, i) = ANOFFSET (new_offsets, i);
}
}
/* Many places in gdb want to test just to see if we have any partial
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_partial_symbols ()
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp -> psymtabs != NULL)
{
return 1;
}
}
return 0;
}
/* Many places in gdb want to test just to see if we have any full
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_full_symbols ()
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp -> symtabs != NULL)
{
return 1;
}
}
return 0;
}
/* Many places in gdb want to test just to see if we have any minimal
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_minimal_symbols ()
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp -> msymbols != NULL)
{
return 1;
}
}
return 0;
}
#if !defined(NO_MMALLOC) && defined(HAVE_MMAP)
/* Given the name of a mapped symbol file in SYMSFILENAME, and the timestamp
of the corresponding symbol file in MTIME, try to open an existing file
with the name SYMSFILENAME and verify it is more recent than the base
file by checking it's timestamp against MTIME.
If SYMSFILENAME does not exist (or can't be stat'd), simply returns -1.
If SYMSFILENAME does exist, but is out of date, we check to see if the
user has specified creation of a mapped file. If so, we don't issue
any warning message because we will be creating a new mapped file anyway,
overwriting the old one. If not, then we issue a warning message so that
the user will know why we aren't using this existing mapped symbol file.
In either case, we return -1.
If SYMSFILENAME does exist and is not out of date, but can't be opened for
some reason, then prints an appropriate system error message and returns -1.
Otherwise, returns the open file descriptor. */
static int
open_existing_mapped_file (symsfilename, mtime, mapped)
char *symsfilename;
long mtime;
int mapped;
{
int fd = -1;
struct stat sbuf;
if (stat (symsfilename, &sbuf) == 0)
{
if (sbuf.st_mtime < mtime)
{
if (!mapped)
{
warning ("mapped symbol file `%s' is out of date, ignored it",
symsfilename);
}
}
else if ((fd = open (symsfilename, O_RDWR)) < 0)
{
if (error_pre_print)
{
printf (error_pre_print);
}
print_sys_errmsg (symsfilename, errno);
}
}
return (fd);
}
/* Look for a mapped symbol file that corresponds to FILENAME and is more
recent than MTIME. If MAPPED is nonzero, the user has asked that gdb
use a mapped symbol file for this file, so create a new one if one does
not currently exist.
If found, then return an open file descriptor for the file, otherwise
return -1.
This routine is responsible for implementing the policy that generates
the name of the mapped symbol file from the name of a file containing
symbols that gdb would like to read. Currently this policy is to append
".syms" to the name of the file.
This routine is also responsible for implementing the policy that
determines where the mapped symbol file is found (the search path).
This policy is that when reading an existing mapped file, a file of
the correct name in the current directory takes precedence over a
file of the correct name in the same directory as the symbol file.
When creating a new mapped file, it is always created in the current
directory. This helps to minimize the chances of a user unknowingly
creating big mapped files in places like /bin and /usr/local/bin, and
allows a local copy to override a manually installed global copy (in
/bin for example). */
static int
open_mapped_file (filename, mtime, mapped)
char *filename;
long mtime;
int mapped;
{
int fd;
char *symsfilename;
/* First try to open an existing file in the current directory, and
then try the directory where the symbol file is located. */
symsfilename = concat ("./", basename (filename), ".syms", (char *) NULL);
if ((fd = open_existing_mapped_file (symsfilename, mtime, mapped)) < 0)
{
free (symsfilename);
symsfilename = concat (filename, ".syms", (char *) NULL);
fd = open_existing_mapped_file (symsfilename, mtime, mapped);
}
/* If we don't have an open file by now, then either the file does not
already exist, or the base file has changed since it was created. In
either case, if the user has specified use of a mapped file, then
create a new mapped file, truncating any existing one. If we can't
create one, print a system error message saying why we can't.
By default the file is rw for everyone, with the user's umask taking
care of turning off the permissions the user wants off. */
if ((fd < 0) && mapped)
{
free (symsfilename);
symsfilename = concat ("./", basename (filename), ".syms",
(char *) NULL);
if ((fd = open (symsfilename, O_RDWR | O_CREAT | O_TRUNC, 0666)) < 0)
{
if (error_pre_print)
{
printf (error_pre_print);
}
print_sys_errmsg (symsfilename, errno);
}
}
free (symsfilename);
return (fd);
}
/* Return the base address at which we would like the next objfile's
mapped data to start.
For now, we use the kludge that the configuration specifies a base
address to which it is safe to map the first mmalloc heap, and an
increment to add to this address for each successive heap. There are
a lot of issues to deal with here to make this work reasonably, including:
Avoid memory collisions with existing mapped address spaces
Reclaim address spaces when their mmalloc heaps are unmapped
When mmalloc heaps are shared between processes they have to be
mapped at the same addresses in each
Once created, a mmalloc heap that is to be mapped back in must be
mapped at the original address. I.E. each objfile will expect to
be remapped at it's original address. This becomes a problem if
the desired address is already in use.
etc, etc, etc.
*/
static CORE_ADDR
map_to_address ()
{
#if defined(MMAP_BASE_ADDRESS) && defined (MMAP_INCREMENT)
static CORE_ADDR next = MMAP_BASE_ADDRESS;
CORE_ADDR mapto = next;
next += MMAP_INCREMENT;
return (mapto);
#else
return (0);
#endif
}
#endif /* !defined(NO_MMALLOC) && defined(HAVE_MMAP) */
/* Returns a section whose range includes PC or NULL if none found. */
struct obj_section *
find_pc_section(pc)
CORE_ADDR pc;
{
struct obj_section *s;
struct objfile *objfile;
ALL_OBJFILES (objfile)
for (s = objfile->sections; s < objfile->sections_end; ++s)
if (s->addr <= pc
&& pc < s->endaddr)
return(s);
return(NULL);
}