old-cross-binutils/gdb/remote-udi.c
Stu Grossman b58a197344 * infrun.c (wait_for_inferior): Fix PC out of subroutine bounds
check to use prev_func_start/end instead of stop_func_start/end.
	* remote-udi.c (store_register):  Invalidate NPC/PC_REGNUM after
	changing PC.
1993-10-25 22:24:02 +00:00

1626 lines
43 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Remote debugging interface for AMD 29k interfaced via UDI, for GDB.
Copyright 1990, 1992 Free Software Foundation, Inc.
Written by Daniel Mann. Contributed by AMD.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* This is like remote.c but uses the Universal Debug Interface (UDI) to
talk to the target hardware (or simulator). UDI is a TCP/IP based
protocol; for hardware that doesn't run TCP, an interface adapter
daemon talks UDI on one side, and talks to the hardware (typically
over a serial port) on the other side.
- Originally written by Daniel Mann at AMD for MiniMON and gdb 3.91.6.
- David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this
file to gdb 3.95. I was unable to get this working on sun3os4
with termio, only with sgtty.
- Daniel Mann at AMD took the 3.95 adaptions above and replaced
MiniMON interface with UDI-p interface. */
#include "defs.h"
#include "inferior.h"
#include "wait.h"
#include "value.h"
#include <ctype.h>
#include <fcntl.h>
#include <signal.h>
#include <errno.h>
#include <string.h>
#include "terminal.h"
#include "target.h"
#include "29k-share/udi/udiproc.h"
#include "gdbcmd.h"
#include "bfd.h"
#include "gdbcore.h" /* For download function */
/* access the register store directly, without going through
the normal handler functions. This avoids an extra data copy. */
extern int stop_soon_quietly; /* for wait_for_inferior */
extern struct value *call_function_by_hand();
static void udi_resume PARAMS ((int pid, int step, int sig));
static void udi_fetch_registers PARAMS ((int regno));
static void udi_load PARAMS ((char *args, int from_tty));
static void fetch_register PARAMS ((int regno));
static void udi_store_registers PARAMS ((int regno));
static int store_register PARAMS ((int regno));
static int regnum_to_srnum PARAMS ((int regno));
static void udi_close PARAMS ((int quitting));
static CPUSpace udi_memory_space PARAMS ((CORE_ADDR addr));
static int udi_write_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
int len));
static int udi_read_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
int len));
static void download PARAMS ((char *load_arg_string, int from_tty));
char CoffFileName[100] = "";
#define FREEZE_MODE (read_register(CPS_REGNUM) & 0x400)
#define USE_SHADOW_PC ((processor_type == a29k_freeze_mode) && FREEZE_MODE)
/* FIXME: Replace with `set remotedebug'. Also, seems not to be used. */
#define LLOG_FILE "udi.log"
#if defined (LOG_FILE)
FILE *log_file;
#endif
static int timeout = 5;
extern struct target_ops udi_ops; /* Forward declaration */
/* Special register enumeration.
*/
/******************************************************************* UDI DATA*/
#define MAXDATA 2*1024 /* max UDI[read/write] byte size */
/* Descriptor for I/O to remote machine. Initialize it to -1 so that
udi_open knows that we don't have a file open when the program
starts. */
UDISessionId udi_session_id = -1;
CPUOffset IMemStart = 0;
CPUSizeT IMemSize = 0;
CPUOffset DMemStart = 0;
CPUSizeT DMemSize = 0;
CPUOffset RMemStart = 0;
CPUSizeT RMemSize = 0;
UDIUInt32 CPUPRL;
UDIUInt32 CoProcPRL;
UDIMemoryRange address_ranges[2]; /* Text and data */
UDIResource entry = {0, 0}; /* Entry point */
CPUSizeT stack_sizes[2]; /* Regular and memory stacks */
#define SBUF_MAX 1024 /* maximum size of string handling buffer */
char sbuf[SBUF_MAX];
typedef struct bkpt_entry_str
{
UDIResource Addr;
UDIUInt32 PassCount;
UDIBreakType Type;
unsigned int BreakId;
} bkpt_entry_t;
#define BKPT_TABLE_SIZE 40
static bkpt_entry_t bkpt_table[BKPT_TABLE_SIZE];
extern char dfe_errmsg[]; /* error string */
/* malloc'd name of the program on the remote system. */
static char *prog_name = NULL;
/* Number of SIGTRAPs we need to simulate. That is, the next
NEED_ARTIFICIAL_TRAP calls to udi_wait should just return
SIGTRAP without actually waiting for anything. */
/* This is called not only when we first attach, but also when the
user types "run" after having attached. */
static void
udi_create_inferior (execfile, args, env)
char *execfile;
char *args;
char **env;
{
char *args1;
if (execfile)
{
if (prog_name != NULL)
free (prog_name);
prog_name = savestring (execfile, strlen (execfile));
}
else if (entry.Offset)
execfile = "";
else
error ("No image loaded into target.");
if (udi_session_id < 0)
{
printf("UDI connection not open yet.\n");
return;
}
inferior_pid = 40000;
if (!entry.Offset)
download(execfile, 0);
args1 = alloca (strlen(execfile) + strlen(args) + 2);
strcpy (args1, execfile);
strcat (args1, " ");
strcat (args1, args);
UDIInitializeProcess (address_ranges, /* ProcessMemory[] */
(UDIInt)2, /* NumberOfRanges */
entry, /* EntryPoint */
stack_sizes, /* *StackSizes */
(UDIInt)2, /* NumberOfStacks */
args1); /* ArgString */
init_wait_for_inferior ();
clear_proceed_status ();
proceed(-1,-1,0);
}
static void
udi_mourn()
{
#if 0
/* Requiring "target udi" each time you run is a major pain. I suspect
this was just blindy copied from remote.c, in which "target" and
"run" are combined. Having a udi target without an inferior seems
to work between "target udi" and "run", so why not now? */
pop_target (); /* Pop back to no-child state */
#endif
generic_mourn_inferior ();
}
/******************************************************************** UDI_OPEN
** Open a connection to remote TIP.
NAME is the socket domain used for communication with the TIP,
then a space and the socket name or TIP-host name.
'<udi_udi_config_id>' for example.
*/
/* XXX - need cleanups for udiconnect for various failures!!! */
static char *udi_config_id;
static void
udi_open (name, from_tty)
char *name;
int from_tty;
{
unsigned int prl;
char *p;
int cnt;
UDIMemoryRange KnownMemory[10];
UDIUInt32 ChipVersions[10];
UDIInt NumberOfRanges = 10;
UDIInt NumberOfChips = 10;
UDIPId PId;
UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId;
target_preopen(from_tty);
entry.Offset = 0;
for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
bkpt_table[cnt].Type = 0;
if (udi_config_id)
free (udi_config_id);
if (!name)
error("Usage: target udi config_id, where config_id appears in udi_soc file");
udi_config_id = strdup (strtok (name, " \t"));
if (UDIConnect (udi_config_id, &udi_session_id))
error("UDIConnect() failed: %s\n", dfe_errmsg);
push_target (&udi_ops);
#if defined (LOG_FILE)
log_file = fopen (LOG_FILE, "w");
if (log_file == NULL)
error ("udi_open: fopen(%s) %s", LOG_FILE, safe_strerror(errno));
#endif
/*
** Initialize target configuration structure (global)
*/
if (UDIGetTargetConfig (KnownMemory, &NumberOfRanges,
ChipVersions, &NumberOfChips))
error ("UDIGetTargetConfig() failed");
if (NumberOfChips > 2)
fprintf(stderr,"Target has more than one processor\n");
for (cnt=0; cnt < NumberOfRanges; cnt++)
{
switch(KnownMemory[cnt].Space)
{
default:
fprintf(stderr, "UDIGetTargetConfig() unknown memory space\n");
break;
case UDI29KCP_S:
break;
case UDI29KIROMSpace:
RMemStart = KnownMemory[cnt].Offset;
RMemSize = KnownMemory[cnt].Size;
break;
case UDI29KIRAMSpace:
IMemStart = KnownMemory[cnt].Offset;
IMemSize = KnownMemory[cnt].Size;
break;
case UDI29KDRAMSpace:
DMemStart = KnownMemory[cnt].Offset;
DMemSize = KnownMemory[cnt].Size;
break;
}
}
a29k_get_processor_type ();
if (UDICreateProcess (&PId))
fprintf(stderr, "UDICreateProcess() failed\n");
/* Print out some stuff, letting the user now what's going on */
if (UDICapabilities (&TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId,
&TIPIPCId, sbuf))
error ("UDICapabilities() failed");
if (from_tty)
{
printf_filtered ("Connected via UDI socket,\n\
DFE-IPC version %x.%x.%x TIP-IPC version %x.%x.%x TIP version %x.%x.%x\n %s\n",
(DFEIPCId>>8)&0xf, (DFEIPCId>>4)&0xf, DFEIPCId&0xf,
(TIPIPCId>>8)&0xf, (TIPIPCId>>4)&0xf, TIPIPCId&0xf,
(TargetId>>8)&0xf, (TargetId>>4)&0xf, TargetId&0xf,
sbuf);
}
}
/******************************************************************* UDI_CLOSE
Close the open connection to the TIP process.
Use this when you want to detach and do something else
with your gdb. */
static void
udi_close (quitting) /*FIXME: how is quitting used */
int quitting;
{
if (udi_session_id < 0)
return;
/* We should never get here if there isn't something valid in
udi_session_id. */
if (UDIDisconnect (udi_session_id, UDITerminateSession))
error ("UDIDisconnect() failed in udi_close");
/* Do not try to close udi_session_id again, later in the program. */
udi_session_id = -1;
inferior_pid = 0;
#if defined (LOG_FILE)
if (ferror (log_file))
printf ("Error writing log file.\n");
if (fclose (log_file) != 0)
printf ("Error closing log file.\n");
#endif
printf_filtered (" Ending remote debugging\n");
}
/**************************************************************** UDI_ATACH */
/* Attach to a program that is already loaded and running
* Upon exiting the process's execution is stopped.
*/
static void
udi_attach (args, from_tty)
char *args;
int from_tty;
{
UDIResource From;
UDIInt32 PC_adds;
UDICount Count = 1;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
UDIError err;
if (udi_session_id < 0)
error ("UDI connection not opened yet, use the 'target udi' command.\n");
if (from_tty)
printf ("Attaching to remote program %s...\n", prog_name);
UDIStop();
From.Space = UDI29KSpecialRegs;
From.Offset = 11;
if (err = UDIRead(From, &PC_adds, Count, Size, &CountDone, HostEndian))
error ("UDIRead failed in udi_attach");
printf ("Remote process is now halted, pc1 = 0x%x.\n", PC_adds);
}
/************************************************************* UDI_DETACH */
/* Terminate the open connection to the TIP process.
Use this when you want to detach and do something else
with your gdb. Leave remote process running (with no breakpoints set). */
static void
udi_detach (args,from_tty)
char *args;
int from_tty;
{
remove_breakpoints(); /* Just in case there were any left in */
if (UDIDisconnect (udi_session_id, UDIContinueSession))
error ("UDIDisconnect() failed in udi_detach");
pop_target(); /* calls udi_close to do the real work */
if (from_tty)
printf ("Ending remote debugging\n");
}
/****************************************************************** UDI_RESUME
** Tell the remote machine to resume. */
static void
udi_resume (pid, step, sig)
int pid, step, sig;
{
UDIError tip_error;
UDIUInt32 Steps = 1;
UDIStepType StepType = UDIStepNatural;
UDIRange Range;
if (step) /* step 1 instruction */
{
tip_error = UDIStep (Steps, StepType, Range);
if (!tip_error)
return;
fprintf (stderr, "UDIStep() error = %d\n", tip_error);
error ("failed in udi_resume");
}
if (UDIExecute())
error ("UDIExecute() failed in udi_resume");
}
/******************************************************************** UDI_WAIT
** Wait until the remote machine stops, then return,
storing status in STATUS just as `wait' would. */
static int
udi_wait (pid, status)
int pid;
WAITTYPE *status;
{
UDIInt32 MaxTime;
UDIPId PId;
UDIInt32 StopReason;
UDISizeT CountDone;
int old_timeout = timeout;
int old_immediate_quit = immediate_quit;
int i;
WSETEXIT ((*status), 0);
/* wait for message to arrive. It should be:
If the target stops executing, udi_wait() should return.
*/
timeout = 0; /* Wait indefinetly for a message */
immediate_quit = 1; /* Helps ability to QUIT */
while(1)
{
i = 0;
MaxTime = UDIWaitForever;
UDIWait(MaxTime, &PId, &StopReason);
QUIT; /* Let user quit if they want */
switch (StopReason & UDIGrossState)
{
case UDIStdoutReady:
if (UDIGetStdout (sbuf, (UDISizeT)SBUF_MAX, &CountDone))
/* This is said to happen if the program tries to output
a whole bunch of output (more than SBUF_MAX, I would
guess). It doesn't seem to happen with the simulator. */
warning ("UDIGetStdout() failed in udi_wait");
fwrite (sbuf, 1, CountDone, stdout);
fflush(stdout);
continue;
case UDIStderrReady:
UDIGetStderr (sbuf, (UDISizeT)SBUF_MAX, &CountDone);
fwrite (sbuf, 1, CountDone, stderr);
fflush(stderr);
continue;
case UDIStdinNeeded:
{
int ch;
i = 0;
do
{
ch = getchar ();
if (ch == EOF)
break;
sbuf[i++] = ch;
} while (i < SBUF_MAX && ch != '\n');
UDIPutStdin (sbuf, (UDISizeT)i, &CountDone);
continue;
}
case UDIRunning:
/* In spite of the fact that we told UDIWait to wait forever, it will
return spuriously sometimes. */
case UDIStdinModeX:
continue;
default:
break;
}
break;
}
switch (StopReason & UDIGrossState)
{
case UDITrapped:
printf("Am290*0 received vector number %d\n", StopReason >> 24);
switch (StopReason >> 8)
{
case 0: /* Illegal opcode */
printf(" (break point)\n");
WSETSTOP ((*status), SIGTRAP);
break;
case 1: /* Unaligned Access */
WSETSTOP ((*status), SIGBUS);
break;
case 3:
case 4:
WSETSTOP ((*status), SIGFPE);
break;
case 5: /* Protection Violation */
WSETSTOP ((*status), SIGILL);
break;
case 6:
case 7:
case 8: /* User Instruction Mapping Miss */
case 9: /* User Data Mapping Miss */
case 10: /* Supervisor Instruction Mapping Miss */
case 11: /* Supervisor Data Mapping Miss */
WSETSTOP ((*status), SIGSEGV);
break;
case 12:
case 13:
WSETSTOP ((*status), SIGILL);
break;
case 14: /* Timer */
WSETSTOP ((*status), SIGALRM);
break;
case 15: /* Trace */
WSETSTOP ((*status), SIGTRAP);
break;
case 16: /* INTR0 */
case 17: /* INTR1 */
case 18: /* INTR2 */
case 19: /* INTR3/Internal */
case 20: /* TRAP0 */
case 21: /* TRAP1 */
WSETSTOP ((*status), SIGINT);
break;
case 22: /* Floating-Point Exception */
WSETSTOP ((*status), SIGILL);
break;
case 77: /* assert 77 */
WSETSTOP ((*status), SIGTRAP);
break;
default:
WSETEXIT ((*status), 0);
}
break;
case UDINotExecuting:
WSETSTOP ((*status), SIGTERM);
break;
case UDIStopped:
WSETSTOP ((*status), SIGTSTP);
break;
case UDIWarned:
WSETSTOP ((*status), SIGURG);
break;
case UDIStepped:
case UDIBreak:
WSETSTOP ((*status), SIGTRAP);
break;
case UDIWaiting:
WSETSTOP ((*status), SIGSTOP);
break;
case UDIHalted:
WSETSTOP ((*status), SIGKILL);
break;
case UDIExited:
default:
WSETEXIT ((*status), 0);
}
timeout = old_timeout; /* Restore original timeout value */
immediate_quit = old_immediate_quit;
return inferior_pid;
}
#if 0
/* Handy for debugging */
udi_pc()
{
UDIResource From;
UDIUInt32 *To;
UDICount Count;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
UDIError err;
int pc[2];
unsigned long myregs[256];
int i;
From.Space = UDI29KPC;
From.Offset = 0;
To = (UDIUInt32 *)pc;
Count = 2;
err = UDIRead(From, To, Count, Size, &CountDone, HostEndian);
printf ("err = %d, CountDone = %d, pc[0] = 0x%x, pc[1] = 0x%x\n",
err, CountDone, pc[0], pc[1]);
udi_fetch_registers(-1);
printf("other pc1 = 0x%x, pc0 = 0x%x\n", *(int *)&registers[4 * PC_REGNUM],
*(int *)&registers[4 * NPC_REGNUM]);
/* Now, read all the registers globally */
From.Space = UDI29KGlobalRegs;
From.Offset = 0;
err = UDIRead(From, myregs, 256, 4, &CountDone, HostEndian);
printf ("err = %d, CountDone = %d\n", err, CountDone);
printf("\n");
for (i = 0; i < 256; i += 2)
printf("%d:\t%#10x\t%11d\t%#10x\t%11d\n", i, myregs[i], myregs[i],
myregs[i+1], myregs[i+1]);
printf("\n");
return pc[0];
}
#endif
/********************************************************** UDI_FETCH_REGISTERS
* Read a remote register 'regno'.
* If regno==-1 then read all the registers.
*/
static void
udi_fetch_registers (regno)
int regno;
{
UDIResource From;
UDIUInt32 *To;
UDICount Count;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
UDIError err;
int i;
if (regno >= 0) {
fetch_register(regno);
return;
}
/* Gr1/rsp */
From.Space = UDI29KGlobalRegs;
From.Offset = 1;
To = (UDIUInt32 *)&registers[4 * GR1_REGNUM];
Count = 1;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
register_valid[GR1_REGNUM] = 1;
#if defined(GR64_REGNUM) /* Read gr64-127 */
/* Global Registers gr64-gr95 */
From.Space = UDI29KGlobalRegs;
From.Offset = 64;
To = (UDIUInt32 *)&registers[4 * GR64_REGNUM];
Count = 32;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = GR64_REGNUM; i < GR64_REGNUM + 32; i++)
register_valid[i] = 1;
#endif /* GR64_REGNUM */
/* Global Registers gr96-gr127 */
From.Space = UDI29KGlobalRegs;
From.Offset = 96;
To = (UDIUInt32 *)&registers[4 * GR96_REGNUM];
Count = 32;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = GR96_REGNUM; i < GR96_REGNUM + 32; i++)
register_valid[i] = 1;
/* Local Registers */
From.Space = UDI29KLocalRegs;
From.Offset = 0;
To = (UDIUInt32 *)&registers[4 * LR0_REGNUM];
Count = 128;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = LR0_REGNUM; i < LR0_REGNUM + 128; i++)
register_valid[i] = 1;
/* Protected Special Registers */
From.Space = UDI29KSpecialRegs;
From.Offset = 0;
To = (UDIUInt32 *)&registers[4 * SR_REGNUM(0)];
Count = 15;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = SR_REGNUM(0); i < SR_REGNUM(0) + 15; i++)
register_valid[i] = 1;
if (USE_SHADOW_PC) { /* Let regno_to_srnum() handle the register number */
fetch_register(NPC_REGNUM);
fetch_register(PC_REGNUM);
fetch_register(PC2_REGNUM);
/* Unprotected Special Registers sr128-sr135 */
From.Space = UDI29KSpecialRegs;
From.Offset = 128;
To = (UDIUInt32 *)&registers[4 * SR_REGNUM(128)];
Count = 135-128 + 1;
if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
for (i = SR_REGNUM(128); i < SR_REGNUM(128) + 135-128+1; i++)
register_valid[i] = 1;
}
if (remote_debug)
{
printf("Fetching all registers\n");
printf("Fetching PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n",
read_register(NPC_REGNUM), read_register(PC_REGNUM),
read_register(PC2_REGNUM));
}
/* There doesn't seem to be any way to get these. */
{
int val = -1;
supply_register (FPE_REGNUM, (char *) &val);
supply_register (INTE_REGNUM, (char *) &val);
supply_register (FPS_REGNUM, (char *) &val);
supply_register (EXO_REGNUM, (char *) &val);
}
}
/********************************************************* UDI_STORE_REGISTERS
** Store register regno into the target.
* If regno==-1 then store all the registers.
*/
static void
udi_store_registers (regno)
int regno;
{
UDIUInt32 *From;
UDIResource To;
UDICount Count;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
if (regno >= 0)
{
store_register(regno);
return;
}
if (remote_debug)
{
printf("Storing all registers\n");
printf("PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", read_register(NPC_REGNUM),
read_register(PC_REGNUM), read_register(PC2_REGNUM));
}
/* Gr1/rsp */
From = (UDIUInt32 *)&registers[4 * GR1_REGNUM];
To.Space = UDI29KGlobalRegs;
To.Offset = 1;
Count = 1;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
#if defined(GR64_REGNUM)
/* Global registers gr64-gr95 */
From = (UDIUInt32 *)&registers[4 * GR64_REGNUM];
To.Space = UDI29KGlobalRegs;
To.Offset = 64;
Count = 32;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
#endif /* GR64_REGNUM */
/* Global registers gr96-gr127 */
From = (UDIUInt32 *)&registers[4 * GR96_REGNUM];
To.Space = UDI29KGlobalRegs;
To.Offset = 96;
Count = 32;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
/* Local Registers */
From = (UDIUInt32 *)&registers[4 * LR0_REGNUM];
To.Space = UDI29KLocalRegs;
To.Offset = 0;
Count = 128;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
/* Protected Special Registers */ /* VAB through TMR */
From = (UDIUInt32 *)&registers[4 * SR_REGNUM(0)];
To.Space = UDI29KSpecialRegs;
To.Offset = 0;
Count = 10;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
/* PC0, PC1, PC2 possibly as shadow registers */
From = (UDIUInt32 *)&registers[4 * SR_REGNUM(10)];
To.Space = UDI29KSpecialRegs;
Count = 3;
if (USE_SHADOW_PC)
To.Offset = 20; /* SPC0 */
else
To.Offset = 10; /* PC0 */
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
/* PC1 via UDI29KPC */
From = (UDIUInt32 *)&registers[4 * PC_REGNUM];
To.Space = UDI29KPC;
To.Offset = 0; /* PC1 */
Count = 1;
if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian))
error ("UDIWrite() failed in udi_store_regisetrs");
/* LRU and MMU */
From = (UDIUInt32 *)&registers[4 * SR_REGNUM(13)];
To.Space = UDI29KSpecialRegs;
To.Offset = 13;
Count = 2;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
/* Unprotected Special Registers */
From = (UDIUInt32 *)&registers[4 * SR_REGNUM(128)];
To.Space = UDI29KSpecialRegs;
To.Offset = 128;
Count = 135-128 +1;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
error("UDIWrite() failed in udi_store_regisetrs");
registers_changed ();
}
/****************************************************** UDI_PREPARE_TO_STORE */
/* Get ready to modify the registers array. On machines which store
individual registers, this doesn't need to do anything. On machines
which store all the registers in one fell swoop, this makes sure
that registers contains all the registers from the program being
debugged. */
static void
udi_prepare_to_store ()
{
/* Do nothing, since we can store individual regs */
}
/********************************************************** TRANSLATE_ADDR */
static CORE_ADDR
translate_addr(addr)
CORE_ADDR addr;
{
#if defined(ULTRA3) && defined(KERNEL_DEBUGGING)
/* Check for a virtual address in the kernel */
/* Assume physical address of ublock is in paddr_u register */
/* FIXME: doesn't work for user virtual addresses */
if (addr >= UVADDR) {
/* PADDR_U register holds the physical address of the ublock */
CORE_ADDR i = (CORE_ADDR)read_register(PADDR_U_REGNUM);
return(i + addr - (CORE_ADDR)UVADDR);
} else {
return(addr);
}
#else
return(addr);
#endif
}
/************************************************* UDI_XFER_INFERIOR_MEMORY */
/* FIXME! Merge these two. */
static int
udi_xfer_inferior_memory (memaddr, myaddr, len, write)
CORE_ADDR memaddr;
char *myaddr;
int len;
int write;
{
memaddr = translate_addr(memaddr);
if (write)
return udi_write_inferior_memory (memaddr, myaddr, len);
else
return udi_read_inferior_memory (memaddr, myaddr, len);
}
/********************************************************** UDI_FILES_INFO */
static void
udi_files_info ()
{
printf ("\tAttached to UDI socket to %s and running program %s.\n",
udi_config_id, prog_name);
}
/**************************************************** UDI_INSERT_BREAKPOINT */
static int
udi_insert_breakpoint (addr, contents_cache)
CORE_ADDR addr;
char *contents_cache;
{
int cnt;
UDIError err;
for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
if (bkpt_table[cnt].Type == 0) /* Find first free slot */
break;
if(cnt >= BKPT_TABLE_SIZE)
error("Too many breakpoints set");
bkpt_table[cnt].Addr.Offset = addr;
bkpt_table[cnt].Addr.Space = UDI29KIRAMSpace;
bkpt_table[cnt].PassCount = 1;
bkpt_table[cnt].Type = UDIBreakFlagExecute;
err = UDISetBreakpoint(bkpt_table[cnt].Addr,
bkpt_table[cnt].PassCount,
bkpt_table[cnt].Type,
&bkpt_table[cnt].BreakId);
if (err == 0) return 0; /* Success */
bkpt_table[cnt].Type = 0;
error("UDISetBreakpoint returned error code %d\n", err);
}
/**************************************************** UDI_REMOVE_BREAKPOINT */
static int
udi_remove_breakpoint (addr, contents_cache)
CORE_ADDR addr;
char *contents_cache;
{
int cnt;
UDIError err;
for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
if (bkpt_table[cnt].Addr.Offset == addr) /* Find matching breakpoint */
break;
if(cnt >= BKPT_TABLE_SIZE)
error("Can't find breakpoint in table");
bkpt_table[cnt].Type = 0;
err = UDIClearBreakpoint(bkpt_table[cnt].BreakId);
if (err == 0) return 0; /* Success */
error("UDIClearBreakpoint returned error code %d\n", err);
}
static void
udi_kill(arg,from_tty)
char *arg;
int from_tty;
{
#if 0
/*
UDIStop does not really work as advertised. It causes the TIP to close it's
connection, which usually results in GDB dying with a SIGPIPE. For now, we
just invoke udi_close, which seems to get things right.
*/
UDIStop();
udi_session_id = -1;
inferior_pid = 0;
if (from_tty)
printf("Target has been stopped.");
#else
udi_close(0);
#endif
pop_target();
}
/*
Load a program into the target. Args are: `program {options}'. The options
are used to control loading of the program, and are NOT passed onto the
loaded code as arguments. (You need to use the `run' command to do that.)
The options are:
-ms %d Set mem stack size to %d
-rs %d Set regular stack size to %d
-i send init info (default)
-noi don't send init info
-[tT] Load Text section
-[dD] Load Data section
-[bB] Load BSS section
-[lL] Load Lit section
*/
static void
download(load_arg_string, from_tty)
char *load_arg_string;
int from_tty;
{
#define DEFAULT_MEM_STACK_SIZE 0x6000
#define DEFAULT_REG_STACK_SIZE 0x2000
char *token;
char *filename;
asection *section;
bfd *pbfd;
UDIError err;
int load_text = 1, load_data = 1, load_bss = 1, load_lit = 1;
address_ranges[0].Space = UDI29KIRAMSpace;
address_ranges[0].Offset = 0xffffffff;
address_ranges[0].Size = 0;
address_ranges[1].Space = UDI29KDRAMSpace;
address_ranges[1].Offset = 0xffffffff;
address_ranges[1].Size = 0;
stack_sizes[0] = DEFAULT_REG_STACK_SIZE;
stack_sizes[1] = DEFAULT_MEM_STACK_SIZE;
dont_repeat ();
filename = strtok(load_arg_string, " \t");
if (!filename)
error ("Must specify at least a file name with the load command");
filename = tilde_expand (filename);
make_cleanup (free, filename);
while (token = strtok (NULL, " \t"))
{
if (token[0] == '-')
{
token++;
if (STREQ (token, "ms"))
stack_sizes[1] = atol (strtok (NULL, " \t"));
else if (STREQ (token, "rs"))
stack_sizes[0] = atol (strtok (NULL, " \t"));
else
{
load_text = load_data = load_bss = load_lit = 0;
while (*token)
{
switch (*token++)
{
case 't':
case 'T':
load_text = 1;
break;
case 'd':
case 'D':
load_data = 1;
break;
case 'b':
case 'B':
load_bss = 1;
break;
case 'l':
case 'L':
load_lit = 1;
break;
default:
error ("Unknown UDI load option -%s", token-1);
}
}
}
}
}
pbfd = bfd_openr (filename, gnutarget);
if (!pbfd)
perror_with_name (filename);
make_cleanup (bfd_close, pbfd);
QUIT;
immediate_quit++;
if (!bfd_check_format (pbfd, bfd_object))
error ("It doesn't seem to be an object file");
for (section = pbfd->sections; section; section = section->next)
{
if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC)
{
UDIResource To;
UDICount Count;
unsigned long section_size, section_end;
const char *section_name;
section_name = bfd_get_section_name (pbfd, section);
if (STREQ (section_name, ".text") && !load_text)
continue;
else if (STREQ (section_name, ".data") && !load_data)
continue;
else if (STREQ (section_name, ".bss") && !load_bss)
continue;
else if (STREQ (section_name, ".lit") && !load_lit)
continue;
To.Offset = bfd_get_section_vma (pbfd, section);
section_size = bfd_section_size (pbfd, section);
section_end = To.Offset + section_size;
if (section_size == 0)
/* This is needed at least in the BSS case, where the code
below starts writing before it even checks the size. */
continue;
printf("[Loading section %s at %x (%d bytes)]\n",
section_name,
To.Offset,
section_size);
if (bfd_get_section_flags (pbfd, section) & SEC_CODE)
{
To.Space = UDI29KIRAMSpace;
address_ranges[0].Offset = min (address_ranges[0].Offset,
To.Offset);
address_ranges[0].Size = max (address_ranges[0].Size,
section_end
- address_ranges[0].Offset);
}
else
{
To.Space = UDI29KDRAMSpace;
address_ranges[1].Offset = min (address_ranges[1].Offset,
To.Offset);
address_ranges[1].Size = max (address_ranges[1].Size,
section_end
- address_ranges[1].Offset);
}
if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) /* Text, data or lit */
{
file_ptr fptr;
fptr = 0;
while (section_size > 0)
{
char buffer[1024];
Count = min (section_size, 1024);
bfd_get_section_contents (pbfd, section, buffer, fptr,
Count);
err = UDIWrite ((UDIHostMemPtr)buffer, /* From */
To, /* To */
Count, /* Count */
(UDISizeT)1, /* Size */
&Count, /* CountDone */
(UDIBool)0); /* HostEndian */
if (err)
error ("UDIWrite failed, error = %d", err);
To.Offset += Count;
fptr += Count;
section_size -= Count;
}
}
else /* BSS */
{
UDIResource From;
unsigned long zero = 0;
/* Write a zero byte at the vma */
/* FIXME: Broken for sections of 1-3 bytes (we test for
zero above). */
err = UDIWrite ((UDIHostMemPtr)&zero, /* From */
To, /* To */
(UDICount)1, /* Count */
(UDISizeT)4, /* Size */
&Count, /* CountDone */
(UDIBool)0); /* HostEndian */
if (err)
error ("UDIWrite failed, error = %d", err);
From = To;
To.Offset+=4;
/* Now, duplicate it for the length of the BSS */
err = UDICopy (From, /* From */
To, /* To */
(UDICount)(section_size/4 - 1), /* Count */
(UDISizeT)4, /* Size */
&Count, /* CountDone */
(UDIBool)1); /* Direction */
if (err)
{
char message[100];
int xerr;
xerr = UDIGetErrorMsg(err, 100, message, &Count);
if (!xerr)
fprintf (stderr, "Error is %s\n", message);
else
fprintf (stderr, "xerr is %d\n", xerr);
error ("UDICopy failed, error = %d", err);
}
}
}
}
entry.Space = UDI29KIRAMSpace;
entry.Offset = bfd_get_start_address (pbfd);
immediate_quit--;
}
/* User interface to download an image into the remote target. See download()
* for details on args.
*/
static void
udi_load(args, from_tty)
char *args;
int from_tty;
{
download (args, from_tty);
symbol_file_add (strtok (args, " \t"), from_tty, 0, 0, 0, 0);
}
/*************************************************** UDI_WRITE_INFERIOR_MEMORY
** Copy LEN bytes of data from debugger memory at MYADDR
to inferior's memory at MEMADDR. Returns number of bytes written. */
static int
udi_write_inferior_memory (memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int nwritten = 0;
UDIUInt32 *From;
UDIResource To;
UDICount Count;
UDISizeT Size = 1;
UDICount CountDone = 0;
UDIBool HostEndian = 0;
To.Space = udi_memory_space(memaddr);
From = (UDIUInt32*)myaddr;
while (nwritten < len)
{ Count = len - nwritten;
if (Count > MAXDATA) Count = MAXDATA;
To.Offset = memaddr + nwritten;
if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
{ error("UDIWrite() failed in udi_write_inferrior_memory");
break;
}
else
{ nwritten += CountDone;
From += CountDone;
}
}
return(nwritten);
}
/**************************************************** UDI_READ_INFERIOR_MEMORY
** Read LEN bytes from inferior memory at MEMADDR. Put the result
at debugger address MYADDR. Returns number of bytes read. */
static int
udi_read_inferior_memory(memaddr, myaddr, len)
CORE_ADDR memaddr;
char *myaddr;
int len;
{
int nread = 0;
UDIResource From;
UDIUInt32 *To;
UDICount Count;
UDISizeT Size = 1;
UDICount CountDone = 0;
UDIBool HostEndian = 0;
UDIError err;
From.Space = udi_memory_space(memaddr);
To = (UDIUInt32*)myaddr;
while (nread < len)
{ Count = len - nread;
if (Count > MAXDATA) Count = MAXDATA;
From.Offset = memaddr + nread;
if(err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
{ error("UDIRead() failed in udi_read_inferrior_memory");
break;
}
else
{ nread += CountDone;
To += CountDone;
}
}
return(nread);
}
/********************************************************************* WARNING
*/
udi_warning(num)
int num;
{
error ("ERROR while loading program into remote TIP: $d\n", num);
}
/*****************************************************************************/
/* Fetch a single register indicatated by 'regno'.
* Returns 0/-1 on success/failure.
*/
static void
fetch_register (regno)
int regno;
{
UDIResource From;
UDIUInt32 To;
UDICount Count = 1;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
UDIError err;
int result;
if (regno == GR1_REGNUM)
{
From.Space = UDI29KGlobalRegs;
From.Offset = 1;
}
else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
{
From.Space = UDI29KGlobalRegs;
From.Offset = (regno - GR96_REGNUM) + 96;;
}
#if defined(GR64_REGNUM)
else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
{
From.Space = UDI29KGlobalRegs;
From.Offset = (regno - GR64_REGNUM) + 64;
}
#endif /* GR64_REGNUM */
else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
{
From.Space = UDI29KLocalRegs;
From.Offset = (regno - LR0_REGNUM);
}
else if (regno>=FPE_REGNUM && regno<=EXO_REGNUM)
{
int val = -1;
supply_register(160 + (regno - FPE_REGNUM),(char *) &val);
return; /* Pretend Success */
}
else
{
From.Space = UDI29KSpecialRegs;
From.Offset = regnum_to_srnum(regno);
}
if (err = UDIRead(From, &To, Count, Size, &CountDone, HostEndian))
error("UDIRead() failed in udi_fetch_registers");
supply_register(regno, (char *) &To);
if (remote_debug)
printf("Fetching register %s = 0x%x\n", reg_names[regno], To);
}
/*****************************************************************************/
/* Store a single register indicated by 'regno'.
* Returns 0/-1 on success/failure.
*/
static int
store_register (regno)
int regno;
{
int result;
UDIUInt32 From;
UDIResource To;
UDICount Count = 1;
UDISizeT Size = 4;
UDICount CountDone;
UDIBool HostEndian = 0;
From = read_register (regno); /* get data value */
if (remote_debug)
printf("Storing register %s = 0x%x\n", reg_names[regno], From);
if (regno == GR1_REGNUM)
{
To.Space = UDI29KGlobalRegs;
To.Offset = 1;
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
/* Setting GR1 changes the numbers of all the locals, so invalidate the
* register cache. Do this *after* calling read_register, because we want
* read_register to return the value that write_register has just stuffed
* into the registers array, not the value of the register fetched from
* the inferior.
*/
registers_changed ();
}
#if defined(GR64_REGNUM)
else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
{
To.Space = UDI29KGlobalRegs;
To.Offset = (regno - GR64_REGNUM) + 64;
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
}
#endif /* GR64_REGNUM */
else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
{
To.Space = UDI29KGlobalRegs;
To.Offset = (regno - GR96_REGNUM) + 96;
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
}
else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
{
To.Space = UDI29KLocalRegs;
To.Offset = (regno - LR0_REGNUM);
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
}
else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM)
return 0; /* Pretend Success */
else if (regno == PC_REGNUM)
{
/* PC1 via UDI29KPC */
To.Space = UDI29KPC;
To.Offset = 0; /* PC1 */
result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian);
/* Writing to this loc actually changes the values of pc0 & pc1 */
register_valid[PC_REGNUM] = 0; /* pc1 */
register_valid[NPC_REGNUM] = 0; /* pc0 */
}
else /* An unprotected or protected special register */
{
To.Space = UDI29KSpecialRegs;
To.Offset = regnum_to_srnum(regno);
result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
}
if (result != 0)
error("UDIWrite() failed in store_registers");
return 0;
}
/********************************************************** REGNUM_TO_SRNUM */
/*
* Convert a gdb special register number to a 29000 special register number.
*/
static int
regnum_to_srnum(regno)
int regno;
{
switch(regno) {
case VAB_REGNUM: return(0);
case OPS_REGNUM: return(1);
case CPS_REGNUM: return(2);
case CFG_REGNUM: return(3);
case CHA_REGNUM: return(4);
case CHD_REGNUM: return(5);
case CHC_REGNUM: return(6);
case RBP_REGNUM: return(7);
case TMC_REGNUM: return(8);
case TMR_REGNUM: return(9);
case NPC_REGNUM: return(USE_SHADOW_PC ? (20) : (10));
case PC_REGNUM: return(USE_SHADOW_PC ? (21) : (11));
case PC2_REGNUM: return(USE_SHADOW_PC ? (22) : (12));
case MMU_REGNUM: return(13);
case LRU_REGNUM: return(14);
case IPC_REGNUM: return(128);
case IPA_REGNUM: return(129);
case IPB_REGNUM: return(130);
case Q_REGNUM: return(131);
case ALU_REGNUM: return(132);
case BP_REGNUM: return(133);
case FC_REGNUM: return(134);
case CR_REGNUM: return(135);
case FPE_REGNUM: return(160);
case INTE_REGNUM: return(161);
case FPS_REGNUM: return(162);
case EXO_REGNUM:return(164);
default:
return(255); /* Failure ? */
}
}
/****************************************************************************/
/*
* Determine the Target memory space qualifier based on the addr.
* FIXME: Can't distinguis I_ROM/D_ROM.
* FIXME: Doesn't know anything about I_CACHE/D_CACHE.
*/
static CPUSpace
udi_memory_space(addr)
CORE_ADDR addr;
{
UDIUInt32 tstart = IMemStart;
UDIUInt32 tend = tstart + IMemSize;
UDIUInt32 dstart = DMemStart;
UDIUInt32 dend = tstart + DMemSize;
UDIUInt32 rstart = RMemStart;
UDIUInt32 rend = tstart + RMemSize;
if (((UDIUInt32)addr >= tstart) && ((UDIUInt32)addr < tend)) {
return UDI29KIRAMSpace;
} else if (((UDIUInt32)addr >= dstart) && ((UDIUInt32)addr < dend)) {
return UDI29KDRAMSpace;
} else if (((UDIUInt32)addr >= rstart) && ((UDIUInt32)addr < rend)) {
/* FIXME: how do we determine between D_ROM and I_ROM */
return UDI29KIROMSpace;
} else /* FIXME: what do me do now? */
return UDI29KDRAMSpace; /* Hmmm! */
}
/*********************************************************************** STUBS
*/
void convert16() {;}
void convert32() {;}
FILE* EchoFile = 0; /* used for debugging */
int QuietMode = 0; /* used for debugging */
#ifdef NO_HIF_SUPPORT
service_HIF(msg)
union msg_t *msg;
{
return(0); /* Emulate a failure */
}
#endif
/* Target_ops vector. Not static because there does not seem to be
any portable way to do a forward declaration of a static variable.
The RS/6000 doesn't like "extern" followed by "static"; SunOS
/bin/cc doesn't like "static" twice. */
struct target_ops udi_ops = {
"udi",
"Remote UDI connected TIP",
"Remote debug an AMD 29k using UDI socket connection to TIP process.\n\
Arguments are\n\
`configuration-id AF_INET hostname port-number'\n\
To connect via the network, where hostname and port-number specify the\n\
host and port where you can connect via UDI.\n\
configuration-id is unused.\n\
\n\
`configuration-id AF_UNIX socket-name tip-program'\n\
To connect using a local connection to the \"tip.exe\" program which is\n\
supplied by AMD. If socket-name specifies an AF_UNIX socket then the\n\
tip program must already be started; connect to it using that socket.\n\
If not, start up tip-program, which should be the name of the tip\n\
program. If appropriate, the PATH environment variable is searched.\n\
configuration-id is unused.\n\
\n\
`configuration-id'\n\
Look up the configuration in ./udi_soc or /etc/udi_soc, which\n\
are files containing lines in the above formats. configuration-id is\n\
used to pick which line of the file to use.",
udi_open,
udi_close,
udi_attach,
udi_detach,
udi_resume,
udi_wait,
udi_fetch_registers,
udi_store_registers,
udi_prepare_to_store,
udi_xfer_inferior_memory,
udi_files_info,
udi_insert_breakpoint,
udi_remove_breakpoint,
0, /* termial_init */
0, /* terminal_inferior */
0, /* terminal_ours_for_output */
0, /* terminal_ours */
0, /* terminal_info */
udi_kill, /* FIXME, kill */
udi_load,
0, /* lookup_symbol */
udi_create_inferior,
udi_mourn, /* mourn_inferior FIXME */
0, /* can_run */
0, /* notice_signals */
process_stratum,
0, /* next */
1, /* has_all_memory */
1, /* has_memory */
1, /* has_stack */
1, /* has_registers */
1, /* has_execution */
0, /* sections */
0, /* sections_end */
OPS_MAGIC, /* Always the last thing */
};
void
_initialize_remote_udi ()
{
add_target (&udi_ops);
}