old-cross-binutils/gdb/xtensa-tdep.h
Simon Marchi f486487f55 Mostly trivial enum fixes
This is a patch I extracted from Pedro's C++ branch.  It contains the
most trivial enum fixes, where an integer type/value was used instead
of the appropriate enum type/value.  It fixes many C++ errors, since
in C++ you can't mix integers and enums implicitely.

Regardless of the C++ conversion, I think this is a good cleanup to make
use of the appropriate enum types.

Regression-tested on native x86_64.

gdb/ChangeLog:

	* aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum
	type or value instead of integer.
	(aarch64_linux_insert_watchpoint): Likewise.
	(aarch64_linux_remove_watchpoint): Likewise.
	* ada-lang.c (ada_op_print_tab): Likewise.
	* amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise.
	(amd64_linux_syscall_record_common): Likewise.
	* arch-utils.c (target_byte_order_user): Likewise.
	(default_byte_order): Likewise.
	* arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise.
	(arm_linux_get_hwbp_type): Likewise.
	(arm_linux_hw_watchpoint_initialize): Likewise.
	(arm_linux_insert_watchpoint): Likewise.
	* arm-linux-tdep.c (arm_canonicalize_syscall): Likewise.
	(arm_linux_syscall_record): Likewise.
	* breakpoint.c (update_watchpoint): Likewise.
	(breakpoint_here_p): Likewise.
	(bpstat_print): Likewise.
	(enable_breakpoint_disp): Likewise.
	* c-lang.c (c_op_print_tab): Likewise.
	* cli/cli-decode.c (add_info_alias): Likewise.
	* d-lang.c (d_op_print_tab): Likewise.
	* eval.c (evaluate_subexp_standard): Likewise.
	* f-exp.y (dot_ops): Likewise.
	(f77_keywords): Likewise.
	* f-lang.c (f_op_print_tab): Likewise.
	* go-lang.c (go_op_print_tab): Likewise.
	* guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise.
	* guile/scm-cmd.c (gdbscm_make_command): Likewise.
	* guile/scm-param.c (gdbscm_make_parameter): Likewise.
	* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise.
	* guile/scm-string.c (struct scm_to_stringn_data): Likewise.
	(struct scm_from_stringn_data): Likewise.
	* i386-linux-tdep.c (i386_canonicalize_syscall): Likewise.
	* ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise.
	(ia64_linux_remove_watchpoint): Likewise.
	(ia64_linux_can_use_hw_breakpoint): Likewise.
	* infrun.c (print_stop_event): Likewise.
	* jv-lang.c (java_op_print_tab): Likewise.
	* linux-nat.c (linux_proc_xfer_partial): Likewise.
	* linux-nat.h (struct lwp_info): Likewise.
	* linux-thread-db.c (enable_thread_event): Likewise.
	* m2-lang.c (m2_op_print_tab): Likewise.
	* mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise.
	(mi_cmd_stack_list_variables): Likewise.
	* mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise.
	* mi/mi-out.c (mi_table_begin): Likewise.
	(mi_table_header): Likewise.
	* mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise.
	(mips_linux_insert_watchpoint): Likewise.
	(mips_linux_remove_watchpoint): Likewise.
	* nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise.
	* nat/mips-linux-watch.h (struct mips_watchpoint): Likewise.
	(mips_linux_watch_type_to_irw): Likewise.
	* nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_hw_watchpoint): Likewise.
	(procfs_can_use_hw_breakpoint): Likewise.
	(procfs_remove_hw_watchpoint): Likewise.
	(procfs_insert_hw_watchpoint): Likewise.
	* p-lang.c (pascal_op_print_tab): Likewise.
	* ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise.
	* ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise.
	* ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise.
	* procfs.c (procfs_can_use_hw_breakpoint): Likewise.
	(procfs_insert_watchpoint): Likewise.
	(procfs_remove_watchpoint): Likewise.
	* psymtab.c (recursively_search_psymtabs): Likewise.
	* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise.
	(m32r_insert_watchpoint): Likewise.
	* remote-mips.c (mips_can_use_watchpoint): Likewise.
	(mips_insert_watchpoint): Likewise.
	(mips_remove_watchpoint): Likewise.
	* remote.c (watchpoint_to_Z_packet): Likewise.
	(remote_insert_watchpoint): Likewise.
	(remote_remove_watchpoint): Likewise.
	(remote_check_watch_resources): Likewise.
	* s390-linux-nat.c (s390_insert_watchpoint): Likewise.
	(s390_remove_watchpoint): Likewise.
	(s390_can_use_hw_breakpoint): Likewise.
	* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
	* spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise.
	* target.h (struct target_ops): Likewise.
	* tilegx-tdep.c (tilegx_analyze_prologue): Likewise.
	* ui-out.c (struct ui_out_hdr): Likewise.
	(append_header_to_list): Likewise.
	(get_next_header): Likewise.
	(verify_field): Likewise.
	(ui_out_begin): Likewise.
	(ui_out_field_int): Likewise.
	(ui_out_field_fmt_int): Likewise.
	(ui_out_field_skip): Likewise.
	(ui_out_field_string): Likewise.
	(ui_out_field_fmt): Likewise.
	* varobj.c (new_variable): Likewise.
	* x86-nat.c (x86_insert_watchpoint): Likewise.
	(x86_remove_watchpoint): Likewise.
	(x86_can_use_hw_breakpoint): Likewise.
	* xtensa-tdep.h (struct gdbarch_tdep): Likewise.
	* inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to
	previously anonymous enumeration type..
	* linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall
	value.
	* target-debug.h (target_debug_print_enum_target_hw_bp_type): New.
	(target_debug_print_enum_bptype): New.
	* target-delegates.c: Regenerate.
2015-07-31 13:19:53 -04:00

306 lines
9.8 KiB
C

/* Target-dependent code for the Xtensa port of GDB, the GNU debugger.
Copyright (C) 2003-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* XTENSA_TDEP_VERSION can/should be changed along with XTENSA_CONFIG_VERSION
whenever the "tdep" structure changes in an incompatible way. */
#define XTENSA_TDEP_VERSION 0x60
/* Xtensa register type. */
typedef enum
{
xtRegisterTypeArRegfile = 1, /* Register File ar0..arXX. */
xtRegisterTypeSpecialReg, /* CPU states, such as PS, Booleans, (rsr). */
xtRegisterTypeUserReg, /* User defined registers (rur). */
xtRegisterTypeTieRegfile, /* User define register files. */
xtRegisterTypeTieState, /* TIE States (mapped on user regs). */
xtRegisterTypeMapped, /* Mapped on Special Registers. */
xtRegisterTypeUnmapped, /* Special case of masked registers. */
xtRegisterTypeWindow, /* Live window registers (a0..a15). */
xtRegisterTypeVirtual, /* PC, FP. */
xtRegisterTypeUnknown
} xtensa_register_type_t;
/* Xtensa register group. */
#define XTENSA_MAX_COPROCESSOR 0x10 /* Number of Xtensa coprocessors. */
typedef enum
{
xtRegisterGroupUnknown = 0,
xtRegisterGroupRegFile = 0x0001, /* Register files without ARx. */
xtRegisterGroupAddrReg = 0x0002, /* ARx. */
xtRegisterGroupSpecialReg = 0x0004, /* SRxx. */
xtRegisterGroupUserReg = 0x0008, /* URxx. */
xtRegisterGroupState = 0x0010, /* States. */
xtRegisterGroupGeneral = 0x0100, /* General registers, Ax, SR. */
xtRegisterGroupUser = 0x0200, /* User registers. */
xtRegisterGroupFloat = 0x0400, /* Floating Point. */
xtRegisterGroupVectra = 0x0800, /* Vectra. */
xtRegisterGroupSystem = 0x1000, /* System. */
xtRegisterGroupNCP = 0x00800000, /* Non-CP non-base opt/custom. */
xtRegisterGroupCP0 = 0x01000000, /* CP0. */
xtRegisterGroupCP1 = 0x02000000, /* CP1. */
xtRegisterGroupCP2 = 0x04000000, /* CP2. */
xtRegisterGroupCP3 = 0x08000000, /* CP3. */
xtRegisterGroupCP4 = 0x10000000, /* CP4. */
xtRegisterGroupCP5 = 0x20000000, /* CP5. */
xtRegisterGroupCP6 = 0x40000000, /* CP6. */
xtRegisterGroupCP7 = 0x80000000, /* CP7. */
} xtensa_register_group_t;
/* Xtensa target flags. */
typedef enum
{
xtTargetFlagsNonVisibleRegs = 0x0001,
xtTargetFlagsUseFetchStore = 0x0002,
} xtensa_target_flags_t;
/* Xtensa ELF core file register set representation ('.reg' section).
Copied from target-side ELF header <xtensa/elf.h>. */
typedef uint32_t xtensa_elf_greg_t;
typedef struct
{
xtensa_elf_greg_t pc;
xtensa_elf_greg_t ps;
xtensa_elf_greg_t lbeg;
xtensa_elf_greg_t lend;
xtensa_elf_greg_t lcount;
xtensa_elf_greg_t sar;
xtensa_elf_greg_t windowstart;
xtensa_elf_greg_t windowbase;
xtensa_elf_greg_t reserved[8+48];
xtensa_elf_greg_t ar[64];
} xtensa_elf_gregset_t;
#define XTENSA_ELF_NGREG (sizeof (xtensa_elf_gregset_t) \
/ sizeof (xtensa_elf_greg_t))
/* Mask. */
typedef struct
{
int reg_num;
int bit_start;
int bit_size;
} xtensa_reg_mask_t;
typedef struct
{
int count;
xtensa_reg_mask_t *mask;
} xtensa_mask_t;
/* Xtensa register representation. */
typedef struct
{
char* name; /* Register name. */
int offset; /* Offset. */
xtensa_register_type_t type; /* Register type. */
xtensa_register_group_t group;/* Register group. */
struct type* ctype; /* C-type. */
int bit_size; /* The actual bit size in the target. */
int byte_size; /* Actual space allocated in registers[]. */
int align; /* Alignment for this register. */
unsigned int target_number; /* Register target number. */
int flags; /* Flags. */
int coprocessor; /* Coprocessor num, -1 for non-CP, else -2. */
const xtensa_mask_t *mask; /* Register is a compilation of other regs. */
const char *fetch; /* Instruction sequence to fetch register. */
const char *store; /* Instruction sequence to store register. */
} xtensa_register_t;
/* For xtensa-config.c to expand to the structure above. */
#define XTREG(index,ofs,bsz,sz,al,tnum,flg,cp,ty,gr,name,fet,sto,mas,ct,x,y) \
{#name, ofs, ty, ((gr) | ((xtRegisterGroupNCP >> 2) << (cp + 2))), \
ct, bsz, sz, al, tnum, flg, cp, mas, fet, sto},
#define XTREG_END {0, 0, 0, 0, 0, 0, 0, 0, -1, 0, 0, 0, 0, 0},
#define XTENSA_REGISTER_FLAGS_PRIVILEGED 0x0001
#define XTENSA_REGISTER_FLAGS_READABLE 0x0002
#define XTENSA_REGISTER_FLAGS_WRITABLE 0x0004
#define XTENSA_REGISTER_FLAGS_VOLATILE 0x0008
/* Call-ABI for stack frame. */
typedef enum
{
CallAbiDefault = 0, /* Any 'callX' instructions; default stack. */
CallAbiCall0Only, /* Only 'call0' instructions; flat stack. */
} call_abi_t;
struct ctype_cache
{
struct ctype_cache *next;
int size;
struct type *virtual_type;
};
/* Xtensa-specific target dependencies. */
struct gdbarch_tdep
{
unsigned int target_flags;
/* Spill location for TIE register files under ocd. */
unsigned int spill_location;
unsigned int spill_size;
char *unused; /* Placeholder for compatibility. */
call_abi_t call_abi; /* Calling convention. */
/* CPU configuration. */
unsigned int debug_interrupt_level;
unsigned int icache_line_bytes;
unsigned int dcache_line_bytes;
unsigned int dcache_writeback;
unsigned int isa_use_windowed_registers;
unsigned int isa_use_density_instructions;
unsigned int isa_use_exceptions;
unsigned int isa_use_ext_l32r;
unsigned int isa_max_insn_size; /* Maximum instruction length. */
unsigned int debug_num_ibreaks; /* Number of IBREAKs. */
unsigned int debug_num_dbreaks;
/* Register map. */
xtensa_register_t* regmap;
unsigned int num_regs; /* Number of registers in register map. */
unsigned int num_nopriv_regs; /* Number of non-privileged registers. */
unsigned int num_pseudo_regs; /* Number of pseudo registers. */
unsigned int num_aregs; /* Size of register file. */
unsigned int num_contexts;
int ar_base; /* Register number for AR0. */
int a0_base; /* Register number for A0 (pseudo). */
int wb_regnum; /* Register number for WB. */
int ws_regnum; /* Register number for WS. */
int pc_regnum; /* Register number for PC. */
int ps_regnum; /* Register number for PS. */
int lbeg_regnum; /* Register numbers for count regs. */
int lend_regnum;
int lcount_regnum;
int sar_regnum; /* Register number of SAR. */
int litbase_regnum; /* Register number of LITBASE. */
int interrupt_regnum; /* Register number for interrupt. */
int interrupt2_regnum; /* Register number for interrupt2. */
int cpenable_regnum; /* Register number for cpenable. */
int debugcause_regnum; /* Register number for debugcause. */
int exccause_regnum; /* Register number for exccause. */
int excvaddr_regnum; /* Register number for excvaddr. */
int max_register_raw_size;
int max_register_virtual_size;
unsigned long *fp_layout; /* Layout of custom/TIE regs in 'FP' area. */
unsigned int fp_layout_bytes; /* Size of layout information (in bytes). */
unsigned long *gregmap;
/* Cached register types. */
struct ctype_cache *type_entries;
};
/* Macro to instantiate a gdbarch_tdep structure. */
#define XTENSA_GDBARCH_TDEP_INSTANTIATE(rmap,spillsz) \
{ \
.target_flags = 0, \
.spill_location = -1, \
.spill_size = (spillsz), \
.unused = 0, \
.call_abi = CallAbiDefault, \
.debug_interrupt_level = XCHAL_DEBUGLEVEL, \
.icache_line_bytes = XCHAL_ICACHE_LINESIZE, \
.dcache_line_bytes = XCHAL_DCACHE_LINESIZE, \
.dcache_writeback = XCHAL_DCACHE_IS_WRITEBACK, \
.isa_use_windowed_registers = (XSHAL_ABI != XTHAL_ABI_CALL0), \
.isa_use_density_instructions = XCHAL_HAVE_DENSITY, \
.isa_use_exceptions = XCHAL_HAVE_EXCEPTIONS, \
.isa_use_ext_l32r = XSHAL_USE_ABSOLUTE_LITERALS, \
.isa_max_insn_size = XCHAL_MAX_INSTRUCTION_SIZE, \
.debug_num_ibreaks = XCHAL_NUM_IBREAK, \
.debug_num_dbreaks = XCHAL_NUM_DBREAK, \
.regmap = rmap, \
.num_regs = 0, \
.num_nopriv_regs = 0, \
.num_pseudo_regs = 0, \
.num_aregs = XCHAL_NUM_AREGS, \
.num_contexts = XCHAL_NUM_CONTEXTS, \
.ar_base = -1, \
.a0_base = -1, \
.wb_regnum = -1, \
.ws_regnum = -1, \
.pc_regnum = -1, \
.ps_regnum = -1, \
.lbeg_regnum = -1, \
.lend_regnum = -1, \
.lcount_regnum = -1, \
.sar_regnum = -1, \
.litbase_regnum = -1, \
.interrupt_regnum = -1, \
.interrupt2_regnum = -1, \
.cpenable_regnum = -1, \
.debugcause_regnum = -1, \
.exccause_regnum = -1, \
.excvaddr_regnum = -1, \
.max_register_raw_size = 0, \
.max_register_virtual_size = 0, \
.fp_layout = 0, \
.fp_layout_bytes = 0, \
.gregmap = 0, \
}
#define XTENSA_CONFIG_INSTANTIATE(rmap,spill_size) \
struct gdbarch_tdep xtensa_tdep = \
XTENSA_GDBARCH_TDEP_INSTANTIATE(rmap,spill_size);
#ifndef XCHAL_NUM_CONTEXTS
#define XCHAL_NUM_CONTEXTS 0
#endif
#ifndef XCHAL_HAVE_EXCEPTIONS
#define XCHAL_HAVE_EXCEPTIONS 1
#endif
#define WB_SHIFT 2
/* We assign fixed numbers to the registers of the "current" window
(i.e., relative to WB). The registers get remapped via the reg_map
data structure to their corresponding register in the AR register
file (see xtensa-tdep.c). */