darkkirb/old-cross-binutils
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
old-cross-binutils/gdb/ChangeLog
Tom Tromey 94ae171419 * configure: Rebuild. 
* acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
	Rearrange flags setting.  Add comments.
2009-03-26 01:18:35 +00:00

2831 lines
106 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2009-03-25 Tom Tromey <tromey@redhat.com>
* configure: Rebuild.
* acinclude.m4 (AM_ICONV): Set am_cv_use_build_libiconv.
Rearrange flags setting. Add comments.
2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
* config/i386/nm-i386.h: Remove code within
I386_WATCHPOINTS_IN_TARGET_VECTOR conditional.
* config/i386/nm-cygwin.h: Remove I386_WATCHPOINTS_IN_TARGET_VECTOR
macro.
* config/i386/nm-cygwin64.h: Ditto.
* config/i386/nm-fbsd.h: Ditto.
* config/i386/nm-go32.h: Ditto.
* config/i386/nm-linux.h: Ditto.
* config/i386/nm-linux64.h: Ditto.
2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
ARI fix: "xasprintf" rule.
* printcmd.c (sym_info): Replace xasprintf by xstrprintf.
2009-03-25 Pedro Alves <pedro@codesourcery.com>
* remote.c (remote_start_remote): In non-stop mode, call
init_wait_for_inferior before adding threads and inferiors.
2009-03-25 Joel Brobecker <brobecker@adacore.com>
* breakpoint.c (breakpoint_thread_match): Split a large condition
into several smaller conditions. No behavior change.
2009-03-25 Pedro Alves <pedro@codesourcery.com>
* infrun.c (infrun_thread_thread_exit): New.
(_initialize_infrun): Attach it to the thread_exit observer.
* thread.c (delete_thread_1): Always call the observer, passing it
the silent flag.
* mi/mi-interp.c (mi_thread_exit): Add "silent" parameter. If
SILENT, return immediately.
2009-03-25 Pedro Alves <pedro@codesourcery.com>
* infrun.c (normal_stop): Use has_stack_frames instead of
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
Fix size of FPSCR in Power 7 processors.
* ppc-linux-nat.c (PPC_FEATURE_ARCH_2_05): Remove #define.
(PPC_FEATURE_HAS_DFP): New #define.
(ppc_linux_read_description): Check for DFP feature instead of
ISA 2.05 to decide on size of the FPSCR.
2009-03-25 Kevin Buettner <kevinb@redhat.com>
* mn10300-tdep.c (trad-frame.h): Don't include.
(prologue-value.h): Include.
(mn10300_frame_unwind_cache, set_reg_offsets): Delete.
(struct mn10300_prologue): Define.
(push_reg, translate_rreg, check_for_saved): New functions.
(mn10300_analyze_prologue): Rewrite, using prologue-value
machinery. Handle more instructions than before. Permit
instructions to occur in any order.
(mn10300_skip_prologue): Find the extents of the function
in question; mn10300_analyze_prologue no longer does this.
(mn10300_analyze_frame_prologue): New function.
(mn10300_frame_base): New function.
(mn10300_frame_this_id): Rewrite, no longer using trad-frame
implementation.
(mn10300_frame_prev_register): Likewise.
(mn10300_frame_base_address, mn10300_frame_base struct): Delete.
(mn10300_unwind_pc, mn10300_unwind_sp): Rename `next_frame' to
`this_frame'.
(mn10300_frame_unwind_init): Don't call frame_base_set_default().
2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
Fix completer problem for filename completion on the first try.
* gdb/completer.h (gdb_completion_word_break_characters): New function.
* gdb/completer.c: Include gdb_assert.h.
(complete_line_internal_reason): New enum.
(complete_line_internal): Change last argument type to
complete_line_internal_reason.
Modify function to handle the different complete_line_internal_reason
argument values.
(complete_line): Adapt to change in complete_line_internal.
(command_completer): Ditto.
(gdb_completion_word_break_characters): Implement new function.
* top.c (init_main): Set rl_completion_word_break_hook to
gdb_completion_word_break_characters.
2009-03-25 Pierre Muller <muller@ics.u-strasbg.fr>
ARI fix: "strlen d_name" rule.
* linux-nat.c (linux_nat_xfer_osdata): Use NAMELEN macro.
2009-03-24 Tom Tromey <tromey@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* configure, config.in: Rebuild.
* configure.ac: Check for libiconvlist.
* charset.c: Check HAVE_LIBICONVLIST.
* acinclude.m4 (AM_ICONV): Don't subst LIBICONV, LIBICONV_INCLUDE,
LIBICONV_LIBDIR. Update CPPFLAGS and LIBS.
* Makefile.in (LIBICONV, LIBICONV_INCLUDE, LIBICONV_LIBDIR):
Remove.
(INTERNAL_CFLAGS_BASE): Update.
(INTERNAL_LDFLAGS): Update.
(CLIBS): Update.
2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* configure.ac: Initialize the variable $PREFER_CURSES.
* configure: Regenerated.
2009-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* configure.ac: Enable $PREFER_CURSES even with default $ENABLE_TUI.
* configure: Regenerated.
2009-03-24 Pierre Muller <muller@ics.u-strasbg.fr>
ARI fix: "strerror" rule.
* darwin-nat.c (darwin_ptrace): Use safe_strerror.
(darwin_stop_inferior, darwin_attach, darwin_detach): Ditto.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-exp.y (get_symbol_field_type): Make sure to resolve typedefs
before looking up the fields inside our struct type.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (resolve_subexp) [UNOP_QUAL]: Resolve typedefs before
trying to resolve the type qualification.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp) [UNOP_IN_RANGE]: make sure
we try to apply the attribute on the real type, rather than
its associated typedef.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp) [OP_ATR_MODULUS]: Use check_typdef
to make sure we try to get the modulus of the actual type, not the
associated typedef.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp): [OP_ATR_FIRST, OP_ATR_LAST]
[OP_ATR_LENGTH]: When using the attribute on a type, make sure
to get the real type, not the associated typedef.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_get_field_index): Add handling of the case
when TYPE is a typedef of a struct.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
Add gdb_usleep as a portable version of usleep based on gdb_select.
* gdb_usleep.h, gdb_usleep.c: New files.
* Makefile.in (SFILES): Add gdb_usleep.c.
(HFILES_NO_SRCDIR): Add gdb_usleep.h.
(COMMON_OBS): Add gdb_usleep.o.
* ser-unix.c (hardwire_send_break): Replace call to gdb_select
by call to gdb_usleep.
2009-03-23 Joel Brobecker <brobecker@adacore.com>
* buildsym.c (end_symtab): If we ignore the subfiles, then
unlink the associated symtabs if they were already allocated.
2009-03-23 Jerome Guitton <guitton@adacore.com>
Provide a way to force building of GDB with libcurses.
* configure.ac: Add --with-curses.
* configure: Regenerated.
2009-03-23 Tom Tromey <tromey@redhat.com>
* dwarf2expr.c (execute_stack_op) <DW_OP_GNU_uninit>: Fix typo in
error message.
2009-03-23 Paul Pluzhnikov <ppluzhnikov@google.com>
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Use
solib_contains_address_p instead of searching.
2009-03-23 Tom Tromey <tromey@redhat.com>
* charset.c (ICONV_CONST) <PHONY_ICONV>: Define.
(iconv): Make 'inbuf' argument const.
(convert_between_encodings): Use ICONV_CONST.
(wchar_iterate): Likewise.
2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
* windows-nat.c (AdjustTokenPrivileges): Implement macro wraparound for
dynamically loaded function.
(LookupPrivilegeValueA): Ditto.
(OpenProcessToken): Ditto.
(AdjustTokenPrivileges): Rename and define placeholder for address of
dynamically loaded function.
(LookupPrivilegeValueA): Ditto.
(OpenProcessToken): Ditto.
(set_process_privilege): Remove check for loaded functions.
(bad_OpenProcessToken): Define.
(_initialize_loadable): Load token functions from advapi here, setting
OpenProcessToken function to a dummy static function which always return
error if OS doesn't support this functionality.
2009-03-22 Nicolas Roche <roche@adacore.com>
Christopher Faylor <me+cygwin@cgf.cx>
* win32-nat.c (ctrl_c_handler): New function.
(win32_wait): Register ctrl_c_handler as Ctrl-C handler if the inferior
is run in a separate console.
2009-03-22 Christopher Faylor <me+cygwin@cgf.cx>
* windows-nat.c (DebugActiveProcessStop): Implement macro wraparound
for dynamically loaded function.
(DebugBreakProcess): Ditto.
(DebugSetProcessKillOnExit): Ditto.
(EnumProcessModules): Ditto.
(GetModuleFileNameExA): Ditto.
(GetModuleInformation): Ditto.
(DebugActiveProcessStop): Rename and define placeholder for address of
dynamically loaded function.
(DebugBreakProcess): Ditto.
(DebugSetProcessKillOnExit): Ditto.
(EnumProcessModules): Ditto.
(GetModuleFileNameExA): Ditto.
(GetModuleInformation): Ditto.
(psapi_loaded): Delete.
(get_module_name): Don't check psapi_loaded, just rely on the fact that
dynamically loaded functions will return failure if they weren't
previously found.
(has_detach_ability): Delete.
(windows_attach): Remove call to has_detach_ability (). Just rely on
functions being callable.
(bad_DebugActiveProcessStop): Define.
(bad_DebugBreakProcess): Ditto.
(bad_DebugSetProcessKillOnExit): Ditto.
(bad_EnumProcessModules): Ditto.
(bad_GetModuleFileNameExA): Ditto.
(bad_GetModuleInformation): Ditto.
(_initialize_loadable): Rename from _initialize_psapi. Initialize all
dynamic storage here, setting nonexistent functions to dummy static
functions which always return error.
2009-03-22 Pedro Alves <pedro@codesourcery.com>
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
2009-03-22 Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (struct thread_info): Add in_infcall member.
* infcall.c (run_inferior_call): Save, set and restore in_infcall.
Remove reverences to suppress_resume_observer. Refresh
`call_thread' after returning from `proceed'.
* infcmd.c (suppress_resume_observer): Delete.
* inferior.h (suppress_resume_observer): Delete declaration.
* mi/mi-interp.c (mi_on_resume): Suppress output while calling an
inferior function.
* thread.c (set_running): Remove references to
suppress_resume_observer.
* infrun.c (struct inferior_status): Add in_infcall member.
(save_inferior_status): Save it.
(restore_inferior_status): Restore it.
2009-03-22 Pedro Alves <pedro@codesourcery.com>
* infcall.c (run_inferior_call): Remove references to
suppress_stop_observer.
* infcmd.c (suppress_stop_observer): Delete.
(finish_command_continuation): Remove NOTE. Don't clear
suppress_stop_observer anymore.
(finish_command_continuation_free_arg): Likewise.
(finish_forward): Remove references to suppress_stop_observer.
Call normal_stop observer if we haven't already.
* inferior.h (suppress_stop_observer): Delete.
* infrun.c (normal_stop): When deciding to suppress the
normal_stop observer, check for proceed_to_finish instead of
suppress_stop_observer.
2009-03-22 Pedro Alves <pedro@codesourcery.com>
* symfile.c (symfile_relocate_debug_section): Remove check for
SEC_DEBUGGING.
2009-03-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Jim Blandy <jimb@red-bean.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
Miscellaneous fixes to the Python code.
* python/python-cmd.c (cmdpy_init): Accept keyword
arguments.
* python/python-value.c (valpy_string): Accept keyword
arguments.
(valpy_binop): Use `break' to exit from the TRY_CATCH block.
Do not call value_to_value_object on NULL RES_VAL.
(value_object_methods): Change `string' entry to also accept
keyword arguments.
(convert_value_from_python): Return a copy of the value if obj is
a gdb.Value object.
(value_object_methods): Mark the `string' method as accepting
keywords, and show method "prototype" in the doc string.
* python/python.c (get_parameter): Don't return inside a
TRY_CATCH.
2009-03-20 Tom Tromey <tromey@redhat.com>
Add support for convenience functions in Python.
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-function.o.
(SUBDIR_PYTHON_SRCS): Add python-function.c.
(python-function.o): New target.
* eval.c: Include "python/python.h" and <ctype.h>.
(evaluate_subexp_standard): Handle values of type
TYPE_CODE_INTERNAL_FUNCTION.
* gdbtypes.h (type_code): Add TYPE_CODE_INTERNAL_FUNCTION.
* parse.c (write_exp_string): Remove duplicate word in comment.
* python/python-function.c: New file.
* python/python-internal.h (gdbpy_initialize_functions): Add
prototype.
* python/python.c (_initialize_python): Call
gdbpy_initialize_functions.
* valprint.c (value_check_printable): Handle values of type
TYPE_CODE_INTERNAL_FUNCTION.
* value.c: Include "cli/cli-decode.h".
(internal_function): New struct.
(functionlist, internal_fn_type): New static variables.
(lookup_only_internalvar,
lookup_internalvar): Add const qualifier to name argument.
(create_internalvar): Likewise. Initialize new field.
(set_internal_var): Fix typo in comment. Don't allow assignment
to canonical variable.
(value_create_internal_function, value_internal_function_name,
call_internal_function, function_command, function_destroyer,
add_internal_function): New functions.
(_initialize_values): Create `function' placeholder command.
Initialize internal_fn_type.
* value.h (lookup_only_internalvar, create_internalvar,
lookup_internalvar): Add const qualifier to name argument.
(internal_function_fn, add_internal_function, call_internal_function,
value_internal_function_name): Add prototypes.
(struct internalvar) <canonical>: New field.
2009-03-20 Tom Tromey <tromey@redhat.com>
* c-lang.c (evaluate_subexp_c): Call check_typedef.
2009-03-20 Tom Tromey <tromey@redhat.com>
Julian Brown <julian@codesourcery.com>
PR i18n/7220, PR i18n/7821, PR exp/8815, PR exp/9103,
PR i18n/9401, PR exp/9613:
* NEWS: Update
* value.h (value_typed_string): Declare.
(val_print_string): Update.
* valprint.h (print_char_chars): Update.
* valprint.c (print_char_chars): Add type argument. Update.
(val_print_string): Likewise.
* valops.c (value_typed_string): New function.
* utils.c (host_char_to_target): New function.
(parse_escape): Use host_char_to_target, host_hex_value. Update.
Remove '^' case.
(no_control_char_error): Remove.
* typeprint.c (print_type_scalar): Update.
* scm-valprint.c (scm_scmval_print): Update.
* scm-lang.h (scm_printchar, scm_printstr): Update.
* scm-lang.c (scm_printchar): Add type argument.
(scm_printstr): Likewise.
* printcmd.c (print_formatted): Update.
(print_scalar_formatted): Update.
(printf_command) <wide_string_arg, wide_char_arg>: New constants.
Handle '%lc' and '%ls'.
* parser-defs.h (struct typed_stoken): New type.
(struct stoken_vector): Likewise.
(write_exp_string_vector): Declare.
* parse.c (write_exp_string_vector): New function.
* p-valprint.c (pascal_val_print): Update.
* p-lang.h (is_pascal_string_type, pascal_printchar,
pascal_printstr): Update.
* p-lang.c (is_pascal_string_type): Remove 'char_size' argument.
Add 'char_type' argument.
(pascal_emit_char): Add type argument.
(pascal_printchar): Likewise.
(pascal_printstr): Likewise.
* objc-lang.c (objc_emit_char): Add type argument.
(objc_printchar): Likewise.
(objc_printstr): Likewise.
* macroexp.c (get_character_constant): Handle unicode characters.
Use c_parse_escape.
(get_string_literal): Handle unicode strings. Use
c_parse_escape.
* m2-valprint.c (print_unpacked_pointer): Update.
(m2_print_array_contents): Update.
(m2_val_print): Update.
* m2-lang.c (m2_emit_char): Add type argument.
(m2_printchar): Likewise.
(m2_printstr): Likewise.
* language.h (struct language_defn) <la_printchar>: Add type
argument.
<la_printstr, la_emitchar>: Likewise.
(LA_PRINT_CHAR): Likewise.
(LA_PRINT_STRING): Likewise.
(LA_EMIT_CHAR): Likewise.
* language.c (unk_lang_emit_char): Add type argument.
(unk_lang_printchar): Likewise.
(unk_lang_printstr): Likewise.
* jv-valprint.c (java_val_print): Update.
* jv-lang.c (java_emit_char): Add type argument.
* f-valprint.c (f_val_print): Update.
* f-lang.c (f_emit_char): Add type argument.
(f_printchar): Likewise.
(f_printstr): Likewise.
* expprint.c (print_subexp_standard): Update.
* charset.h (target_wide_charset): Declare.
(c_target_char_has_backslash_escape, c_parse_backslash,
host_char_print_literally, host_char_to_target,
target_char_to_host, target_char_to_control_char): Remove.
(enum transliterations): New type.
(convert_between_encodings): Declare.
(HOST_ESCAPE_CHAR): New define.
(host_letter_to_control_character, host_hex_value): Declare.
(enum wchar_iterate_result): New enum.
(struct wchar_iterator): Declare.
(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
wchar_push_back): Declare.
* charset-list.h: New file.
* c-valprint.c (textual_name): New function.
(textual_element_type): Handle wide character types.
(c_val_print): Pass original type to textual_element_type. Handle
wide character types.
(c_value_print): Use textual_element_type. Pass original type of
value to val_print.
* c-lang.h (enum c_string_type): New type.
(c_printchar, c_printstr): Update.
* c-lang.c (classify_type): New function.
(print_wchar): Likewise.
(c_emit_char): Add type argument. Handle wide characters.
(c_printchar): Likewise.
(c_printstr): Add type argument. Handle wide and multibyte
character sets.
(convert_ucn): New function.
(emit_numeric_character): Likewise.
(convert_octal): Likewise.
(convert_hex): Likewise.
(ADVANCE): New macro.
(convert_escape): New function.
(parse_one_string): Likewise.
(evaluate_subexp_c): Likewise.
(exp_descriptor_c): New global.
(c_language_defn): Use exp_descriptor_c.
(cplus_language_defn): Likewise.
(asm_language_defn): Likewise.
(minimal_language_defn): Likewise.
(charset_for_string_type): New function.
* c-exp.y (%union): Add 'svec' and 'tsval'.
(CHAR): New token.
(exp): Add CHAR production.
(string_exp): Rewrite.
(exp) <string_exp>: Rewrite.
(tempbuf): Now global.
(tempbuf_init): New global.
(parse_string_or_char): New function.
(yylex) <tempbuf>: Now global.
<tokptr, tempbufindex, tempbufsize, token_string, class_prefix>:
Remove.
Handle 'u', 'U', and 'L' prefixes. Call parse_string_or_char.
(c_parse_escape): New function.
* auxv.c (fprint_target_auxv): Update.
* ada-valprint.c (ada_emit_char): Add type argument.
(ada_printchar): Likewise.
(ada_print_scalar): Update.
(printstr): Add type argument. Update calls to ada_emit_char.
(ada_printstr): Add type argument.
(ada_val_print_array): Update.
(ada_val_print_1): Likewise.
* ada-lang.c (emit_char): Add type argument.
* ada-lang.h (ada_emit_char, ada_printchar, ada_printstr): Add
type arguments.
* gdb_locale.h: Include langinfo.h.
* charset.c (_initialize_charset): Set default host charset from
the locale. Don't register charsets. Add target-wide-charset
commands. Call find_charset_names.
(struct charset, struct translation): Remove.
(GDB_DEFAULT_HOST_CHARSET): Remove.
(GDB_DEFAULT_TARGET_WIDE_CHARSET): New define.
(target_wide_charset_name): New global.
(show_host_charset_name): Handle "auto".
(show_target_wide_charset_name): New function.
(host_charset_enum, target_charset_enum): Remove.
(charset_enum): New global.
(all_charsets, register_charset, lookup_charset, all_translations,
register_translation, lookup_translation): Remove.
(simple_charset, ascii_print_literally, ascii_to_control): Remove.
(iso_8859_print_literally, iso_8859_to_control,
iso_8859_family_charset): Remove.
(ebcdic_print_literally, ebcdic_to_control,
ebcdic_family_charset): Remove.
(struct cached_iconv, check_iconv_cache, cached_iconv_convert,
register_iconv_charsets): Remove.
(target_wide_charset_be_name, target_wide_charset_le_name): New
globals.
(identity_either_char_to_other): Remove.
(set_be_le_names, validate): New functions.
(backslashable, backslashed, represented): Remove.
(default_c_target_char_has_backslash_escape): Remove.
(default_c_parse_backslash, iconv_convert): Remove.
(ascii_to_iso_8859_1_table, ascii_to_ebcdic_us_table,
ascii_to_ibm1047_table, iso_8859_1_to_ascii_table,
iso_8859_1_to_ebcdic_us_table, iso_8859_1_to_ibm1047_table,
ebcdic_us_to_ascii_table, ebcdic_us_to_iso_8859_1_table,
ebcdic_us_to_ibm1047_table, ibm1047_to_ascii_table,
ibm1047_to_iso_8859_1_table, ibm1047_to_ebcdic_us_table): Remove.
(table_convert_char, table_translation, simple_table_translation):
Remove.
(current_host_charset, current_target_charset,
c_target_char_has_backslash_escape_func,
c_target_char_has_backslash_escape_baton): Remove.
(c_parse_backslash_func, c_parse_backslash_baton): Remove.
(host_char_to_target_func, host_char_to_target_baton): Remove.
(target_char_to_host_func, target_char_to_host_baton): Remove.
(cached_iconv_host_to_target, cached_iconv_target_to_host):
Remove.
(lookup_charset_or_error, check_valid_host_charset): Remove.
(set_host_and_target_charsets): Remove.
(set_host_charset, set_target_charset): Remove.
(set_host_charset_sfunc, set_target_charset_sfunc): Rewrite.
(set_target_wide_charset_sfunc): New function.
(show_charset): Print target wide character set.
(host_charset, target_charset): Rewrite.
(target_wide_charset): New function.
(c_target_char_has_backslash_escape): Remove.
(c_parse_backslash): Remove.
(host_letter_to_control_character): New function.
(host_char_print_literally): Remove.
(host_hex_value): New function.
(target_char_to_control_char): Remove.
(cleanup_iconv): New function.
(convert_between_encodings): New function.
(target_char_to_host): Remove.
(struct wchar_iterator): Define.
(make_wchar_iterator, make_cleanup_wchar_iterator, wchar_iterator,
wchar_push_back): New functions.
(do_cleanup_iterator): New function.
(char_ptr): New typedef.
(charsets): New global.
(add_one, find_charset_names): New functions.
(default_charset_names): New global.
(auto_host_charset_name): Likewise.
* aclocal.m4, config.in, configure: Rebuild.
* configure.ac: Call AM_LANGINFO_CODESET.
(GDB_DEFAULT_HOST_CHARSET): Default to UTF-8.
(AM_ICONV): Invoke earlier.
* acinclude.m4: Include codeset.m4. Subst LIBICONV_INCLUDE and
LIBICONV_LIBDIR. Check for libiconv in build tree.
* Makefile.in (LIBICONV_LIBDIR, LIBICONV_INCLUDE): New macros.
(INTERNAL_CFLAGS_BASE): Add LIBICONV_INCLUDE.
(INTERNAL_LDFLAGS): Add LIBICONV_LIBDIR.
* gdb_obstack.h (obstack_grow_wstr): New define.
* gdb_wchar.h: New file.
* defs.h: Include it.
2009-03-20 Tom Tromey <tromey@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (process_die): Handle DW_TAG_typedef.
* eval.c (evaluate_subexp_standard) <OP_TYPE>: Strip a single
typedef.
* ada-lang.c (decode_packed_array_type): Call CHECK_TYPEDEF on the
SYMBOL_TYPE result.
* ada-typeprint.c (print_array_type): Do the NULL check
unconditionally.
2009-03-19 Tom Tromey <tromey@redhat.com>
* utils.c (do_obstack_free): New function.
(make_cleanup_obstack_free): Likewise.
* defs.h (make_cleanup_obstack_free): Declare.
2009-03-18 Doug Evans <dje@google.com>
* linux-nat.c (linux_nat_find_memory_regions): Result of PIDGET is an
int, not a long long.
(linux_nat_info_proc_cmd): Store pid in long instead of long long.
* expprint.c (dump_raw_expression): Print note if non-NULL.
* printcmd.c (display_uses_solib_p): Redo loop, scan element list
backwards.
2009-03-18 Nathan Sidwell <nathan@codesourcery.com>
* Makefile.in: Update license to GPLv3.
* ada-exp.y: Update license to GPLv3.
* ada-lex.l: Update license to GPLv3.
* c-exp.y: Update license to GPLv3.
* cp-name-parser.y: Update license to GPLv3.
* darwin-nat-info.c: Update license to GPLv3.
* f-exp.y: Update license to GPLv3.
* gdb_thread_db.h: Update license to GPLv3.
* hppanbsd-nat.c: Update license to GPLv3.
* hppanbsd-tdep.c: Update license to GPLv3.
* hppaobsd-tdep.c: Update license to GPLv3.
* jv-exp.y: Update license to GPLv3.
* m2-exp.y: Update license to GPLv3.
* objc-exp.y: Update license to GPLv3.
* p-exp.y: Update license to GPLv3.
* reply_mig_hack.awk: Update license to GPLv3.
* reverse.c: Update license to GPLv3.
* xtensa-xtregs.c: Update license to GPLv3.
2009-03-18 Pedro Alves <pedro@codesourcery.com>
* remote.c (remote_close): Don't call generic_mourn_inferior.
(remote_mourn_1): Call generic_mourn_inferior after closing the
target.
2009-03-18 Pedro Alves <pedro@codesourcery.com>
* remote.c (remote_start_remote): Add missing call to
init_wait_for_inferior in non-stop mode.
2009-03-18 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (bpstat_should_step): Only consider software
watchpoints that have a location.
2009-03-17 Joel Brobecker <brobecker@adacore.com>
Add a target_ops parameter to the to_kill method in struct target_ops.
* target.h (struct target_ops): Add a "target_ops *" parameter to
method to_kill.
(target_kill): Remove macro. Add declaration.
* target.c (debug_to_kill): Delete, no longer necessary.
(target_kill): New function.
(update_current_target): Stop inheriting the to_kill method.
Do not de_fault it to no_process either.
(setup_target_debug): Do not set current_target.to_kill.
* gnu-nat.c, go32-nat.c, hpux-thread.c, inf-ptrace.c, inf-ttrace.c,
linux-nat.c, monitor.c, nto-procfs.c, procfs.c, remote-m32r-sdi.c,
remote-mips.c, remote-sim.c, remote.c, windows-nat.c: Update
accordingly.
2009-03-17 Doug Evans <dje@google.com>
* amd64-linux-nat.c (si_timerid,si_overrun): Provide definition for
glibc 2.3.2 and earlier.
2009-03-17 Joel Brobecker <brobecker@adacore.com>
* frame.c (get_prev_frame_1): Do not perform the inner_frame
sanity check if this_frame is not NORMAL.
(frame_id_inner): Update the description of this function.
2009-03-17 Hui Zhu <teawater@gmail.com>
* stack.c: Change the introduce of "disassemble-next-line".
2009-03-17 Pedro Alves <pedro@codesourcery.com>
* mi/mi-main.h (mi_print_timing_maybe): Add strict prototype,
declare as extern.
2009-03-17 Hui Zhu <teawater@gmail.com>
* stack.c: Include valprint.h.
(disassemble_next_line): New enum.
(show_disassemble_next_line): New function. Show the current
value of disassemble-next-line.
(gdb_disassembly_stub_args): New struct for argument passing
between function do_gdb_disassembly and function
gdb_disassembly_stub.
(gdb_disassembly_stub): New function. Helper for
gdb_disassembly.
(do_gdb_disassembly): New function. Use TRY_CATCH to catch
the exception from the gdb_disassembly because it will be
broken by filter sometime.
(print_frame_info): If disassemble-next-line is set to auto
or on and doesn't have the line debug messages for $pc,
output the next instruction.
If disassemble-next-line is set to on and there is line debug
messages, output assembly codes for next line.
(_initialize_stack): Make the "set disassemble-next-line"
command an auto-boolean command. Change its class to
class_stack. Place it in the top level set list. Extend help
to describe the auto mode.
2009-03-17 Pedro Alves <pedro@codesourcery.com>
* infrun.c (normal_stop): Don't overwrite old_chain.
2009-03-16 Joel Brobecker <brobecker@adacore.com>
* remote-mips.c (mips_load): Replace call to regcache_set_valid_p,
which is undefined, by call to regcache_invalidate, which should
do what the original author wanted to do.
2009-03-16 Joel Brobecker <brobecker@adacore.com>
* remote-mips.c (mips_mourn_inferior): Add missing ops parameter.
(mips_create_inferior): Likewise.
2009-03-16 Joel Brobecker <brobecker@adacore.com>
* go32-nat.c (go32_create_inferior): Add missing ops parameter.
2009-03-16 Joel Brobecker <brobecker@adacore.com>
* darwin-nat.c (darwin_resume): Fix a compiler warning when
building on x86_64-darwin.
2009-03-16 Tristan Gingold <gingold@adacore.com>
* configure.tgt: Add handling for x86_64-darwin.
2009-03-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* auxv.c (fprint_target_auxv): New TAG for AT_RANDOM.
2009-03-15 Joel Brobecker <brobecker@adacore.com>
* aix-thread.c (aix_thread_thread_alive, aix_thread_pid_to_str):
Use the ops parameter to get to the target beneath, rather than
using the current_target global. Using the current_target global
was an unintended accident.
2009-03-15 Joel Brobecker <brobecker@adacore.com>
Fix an error happening while loading symbols from a core file
(on AIX).
* rs6000-nat.c (xcoff_relocate_symtab): Use target_has_execution
to detect whether we're debugging a core file or not.
2009-03-15 Joel Brobecker <brobecker@adacore.com>
Modernize the aix-thread later by getting rid of the base_target
global. This brings back to life the AIX port which was otherwise
crashing all the time.
* aix-thread.c (base_target): Delete.
(pd_enable): Do not set base_target.
(aix_thread_attach): Use find_target_beneath instead of base_target.
(aix_thread_detach, aix_thread_resume, aix_thread_wait)
(aix_thread_fetch_registers, aix_thread_store_registers),
(aix_thread_xfer_partial, aix_thread_mourn_inferior)
(aix_thread_thread_alive, aix_thread_pid_to_str): Likewise.
(aix_thread_kill): Delete. Does not seem necessary.
(init_aix_thread_ops): Do not set aix_thread_ops.to_kill.
2009-03-15 Jan Kratochvil <jan.kratochvil@redhat.com>
* stack.c (return_command <retval_exp>): New variables retval_expr
and old_chain. Inline parse_and_eval to initialize retval_expr. Check
RETVAL_EXPR for UNOP_CAST and set RETURN_TYPE to the RETURN_VALUE type
if RETURN_TYPE is NULL.
>>>>>>> 1.10280
2009-03-14 Pedro Alves <pedro@codesourcery.com>
* remote.c (PACKET_qAttached): New.
(remote_query_attached): New.
(remote_add_inferior): Add new `attached' argument. Handle it.
(remote_notice_new_inferior, remote_start_remote): Adjust to pass
-1 to remote_add_inferior in new parameter.
(extended_remote_attach_1): Adjust to pass 1 to
remote_add_inferior in the new parameter.
(extended_remote_create_inferior_1): Adjust to pass 0 to
remote_add_inferior in the new parameter.
(_initialize_remote): Add "set/show remote query-attached-packet"
commands.
2009-03-13 Tom Tromey <tromey@redhat.com>
* symtab.c (lookup_symbol_in_language): Use a cleanup.
2009-03-13 Doug Evans <dje@google.com>
* exceptions.h: Clean up some comments on catch_exceptions usage.
* exceptions.c: Ditto. Plus mark catch_errors as superseded by
catch_exceptions.
2009-02-17 Joel Brobecker <brobecker@adacore.com>
The following patch helps getting rid of a warning inside solib-som.c.
* source.c (source_full_path_of): Constify parameter filename.
* defs.h (source_full_path_of): Update declaration accordingly.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp): Merge case BINOP_REM and
BINOP_MOD cases with the handling of case BINOP_DIV and BINOP_MUL.
Remove useless op value checks when EVAL_AVOID_SIDE_EFFECTS.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp) <BINOP_DIV>: make sure to
promote the operands when noside is EVAL_AVOID_SIDE_EFFECTS.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
* ada-tasks.c (ada_task_is_alive): Move up and make static.
* ada-lang.h (ada_task_is_alive): Remove declaration.
2009-03-12 Jerome Guitton <guitton@adacore.com>
* ada-lang.c (ada_delta): Change the type of numerators and
denominators to DOUBLEST, as they may not fit into a long.
(scaling_factor): Ditto.
2009-03-12 Jerome Guitton <guitton@adacore.com>
* language.c (lang_bool_type): Set lai->bool_type_symbol to NULL.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp) [OP_VAR_VALUE]: For tagged
types, if we are unable to determine the actual symbol type
from its tag, then use the static approximation instead.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
Fix crash printing packed record with packed array.
* ada-lang.c (ada_modulus_from_name): New function.
(ada_modulus): In the case where the type length is bigger than
the size of the type used to hold the bounds, try determining
the modulus from the type name.
(ada_value_primitive_packed_val): Fix bug in the computation of
ntarg causing an out-of-buffer invalid access.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
Fix segfault when printing short_integer'last.
* ada-lang.c (ada_find_any_type): Search in the primitive types
if a symbol could not be found.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
* ada-tasks.c (task_states,long_task_states): Add new states
Activating and Acceptor_Delay_Sleep. Update the description
of state Acceptor_Sleep.
2009-03-12 Jonas Maebe <jonas.maebe@elis.ugent.be> (obvious change)
Fix a build failure on Darwin following some changes in
the profile of some target_ops methods.
* darwin-nat.c (darwin_kill_inferior): Add target_ops parameter
where missing.
(darwin_stop_inferior, darwin_detach): Likewise.
2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
Include token in ^running notification for CLI commands.
* mi/mi-main.c (mi_execute_command): Set current_token here.
(mi_cmd_execute): Do not set current_token here.
2009-03-12 Vladimir Prus <vladimir@codesourcery.com>
Fix MI timings.
* mi/mi-main.c (mi_print_timing_maybe): New.
(captured_mi_execute_command): Simplify. Output timings to
CLI commands, too.
(mi_execute_async_cli_command): Do not print timings.
* mi/mi-main.h (mi_print_timing_maybe): Declare.
* mi/mi-interp.c (mi_on_normal_stop): Call mi_print_timing_maybe.
2009-03-12 Jerome Guitton <guitton@adacore.com>
* xcoffread.c (process_linenos): Check if the line in the
include table refers to the main source file and, if so,
add them to the main subfile.
2009-03-12 Joel Brobecker <brobecker@adacore.com>
Fix a build failure on AIX introduced after a change in the profile
of some of the "methods" in the target_ops structure.
* aix-thread.c: Add missing target_ops parameter throughout.
Implement Ada task switching on AIX.
* aix-thread.c (aix_thread_get_ada_task_ptid): New function.
(init_aix_thread_ops): Set aix_thread_ops.to_get_ada_task_ptid.
2009-03-11 Daniel Jacobowitz <dan@codesourcery.com>
* breakpoint.c (bpstat_check_breakpoint_conditions): Use
value_mark and value_free_to_mark.
* objfiles.c (free_objfile): Call objfile_free_data before
freeing the BFD.
2009-03-10 Hui Zhu <teawater@gmail.com>
* disasm.c (gdb_disassembly): Remove unused argument
"line_num".
* disasm.h (gdb_disassembly): Ditto.
* cli/cli-cmds.c (print_disassembly): Ditto.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Ditto.
2009-03-09 Paul Pluzhnikov <ppluzhnikov@google.com>
* solib.c (solib_contains_address_p): New function.
(solib_name_from_address): Use it.
* printcmd.c (display_uses_solib_p): Use it.
* solib.h (solib_contains_address_p): Declare it.
2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* varobj.c (free_variable): Call value_free.
2009-03-09 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/9873:
* dwarf2read.c (dwarf_decode_macros): New variable `at_commandline'.
Move the variable `macinfo_type' out of the loop. Create a new
processing pass before the current one to pre-create `current_file'.
New complaint on misplaced zero/non-zero definitions/includes.
Skip first DW_MACINFO_start_file with `at_commandline' set.
2008-03-09 Vladimir Prus <vladimir@codesourcery.com>
* solib.c (reload_shared_libraries): Give
inferior a chance to reset solib breakpoint.
Reinit frame cache.
2009-03-08 Christopher Faylor <me+cygwin@cgf.cx>
* windows-nat.c (dr): Redefine to use largest possible integer which
holds a pointer.
(cygwin_set_dr): Avoid coercion.
2009-03-08 Oswald Buddenhagen <oswald.buddenhagen@trolltech.de>
* windows-nat.c (windows_create_inferior): Implement --tty handling on
non-cygwin.
2009-03-06 Paul Pluzhnikov <ppluzhnikov@google.com>
Rename solib_address to solib_name_from_address.
* breakpoint.c (insert_bp_location, disable_breakpoints_in_shlibs)
(disable_breakpoints_in_unloaded_shlib): Update.
* printcmd.c (display_uses_solib_p): Likewise.
* stack.c (print_frame): Likewise.
* solib.c: Rename.
* solib.h: Rename.
2009-03-05 Paul Pluzhnikov <ppluzhnikov@google.com>
* printcmd.c (do_one_display): Reparse exp_string.
(display_uses_solib_p): New function.
(clear_dangling_display_expressions): New function.
(_initialize_printcmd): Add observer.
* solib.c (no_shared_libraries): Swap order of calls to
clear_solib and objfile_purge_solibs.
2009-03-05 Joel Brobecker <brobecker@adacore.com>
Implement the target-specific part of Ada tasking support
on Tru64.
* dec-thread.c (dec_thread_get_ada_task_ptid): New function.
(init_dec_thread_ops): Set the to_get_ada_task_ptid method.
2009-03-05 Joel Brobecker <brobecker@adacore.com>
Get rid of the global "base_target" and use "find_target_beneath"
to find the underlying target.
* dec-thread.c (base_target): Delete.
(enable_dec_thread): Remove assignement to base_target.
(dec_thread_detach, dec_thread_wait, dec_thread_wait)
(dec_thread_fetch_registers, dec_thread_store_registers)
(dec_thread_mourn_inferior, dec_thread_pid_to_str):
Update the function profile if necessary.
Use find_target_beneath to call the same method but from
the underlying target, removing the need for "base_target".
* dec-thread.c (dec_thread_get_regsets, dec_thread_set_regsets):
Fix a copy/paste error in a few debug traces...
* solib-osf.c (init_so): Use a simpler method for computing
the size of lm_info structure. This also gets rid of warning
emitted by the compiler.
2009-03-05 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (check_duplicates_for): Skip permanent breakpoints
duplicates of permanent breakpoints.
2009-03-04 Pedro Alves <pedro@codesourcery.com>
* inferior.h (notice_new_inferior): Declare.
* infcmd.c (notice_new_inferior): New.
* remote.c (remote_add_inferior, remote_add_thread): New.
(notice_new_inferiors): Rename to...
(remote_notice_new_inferior): ... this. Add RUNNING argument.
Use remote_add_thread instead of add_thread, passing it the
RUNNING argument. Add an inferior with remote_add_inferior. If
we just learned about an inferior, call notice_new_inferior.
(record_currthread): Adjust.
(remote_threads_info): Adjust to use remote_notice_new_inferior.
(remote_start_remote, extended_remote_attach_1): Use
remote_add_inferior.
(process_stop_reply): Adjust. Call remote_notice_new_inferior
after handling expedited registers and watchpoint state.
(extended_remote_create_inferior_1): Use remote_add_inferior.
2009-03-04 Aleksandar Ristovski <aristovski@qnx.com>
* infcmd.c (registers_info): Remove register number case.
2009-03-03 Pedro Alves <pedro@codesourcery.com>
* top.c (quit_target): Check for target_has_execution before
killing or detaching from inferiors.
2009-03-02 Joel Brobecker <brobecker@adacore.com>
Remove some unused routines.
* ada-lang.c (is_suppressed_name, ada_suppress_symbol_printing):
Delete.
* ada-lang.c (ada_task_list_iterator_ftype)
(iterate_over_live_ada_tasks): Delete.
* ada-tasks.c (ada_get_environment_task, iterate_over_live_ada_tasks):
Delete.
2009-03-01 Doug Evans <dje@google.com>
* symtab.c: Remove trailing whitespace throughout the file.
(expand_line_sal): Fix some typos and whitespace.
* Makefile.in (clean): rm -f $(DEPDIR)/*.
* Makefile.in (GDB_CFLAGS): Add -I$(srcdir)/common.
(init.c): signals/ -> common/.
(signals.o): Update.
* target.h (target_signal_to_string,target_signal_to_string)
(target_signal_from_name,target_signal_to_host_p)
(target_signal_from_host,target_signal_to_host): Move to ...
* common/gdb_signals.h: ... here. New file.
* common/signals.c: Moved here from signals/signals.c.
#include gdb_signals.h, remove #include of target.h in gdb case.
(target_signal_from_command,default_target_signal_to_host)
(default_target_signal_from_host): Move inside #ifndef GDBSERVER.
Include thread ID in target_wait debugging output.
* infrun.c (print_target_wait_results): New function.
(wait_for_inferior,fetch_inferior_event): Call it.
2009-02-27 Pedro Alves <pedro@codesourcery.com>
* gdb_proc_service.h (struct ps_prochandle): Replace pid_t field
with a ptid_t field.
* linux-thread-db.c (thread_get_info_callback): Build the ptid
using the pid stored in proc_handle.ptid.
(thread_from_lwp, thread_db_attach_lwp, enable_thread_event)
(check_for_thread_db, thread_db_detach, check_event)
(thread_db_mourn_inferior, find_new_threads_callback)
(thread_db_find_new_threads_1): Adjust.
* proc-service.c (ps_xfer_memory, ps_lgetregs, ps_lsetregs)
(ps_lgetfpregs, ps_lsetfpregs, ps_getpid): Adjust.
2009-02-27 Phil Muldoon <pmuldoon@redhat.com>
* valprint.c (read_string): Rework clean-up logic. Use
free_current_contents to clean-up buffer.
2009-02-27 Andreas Schwab <schwab@linux-m68k.org>
* MAINTAINERS: Update e-mail address.
2009-02-26 Phil Muldoon <pmuldoon@redhat.com>
* python/python-utils.c (python_string_to_unicode): Always return
a new reference.
(python_string_to_target_string): Decrement transient python
instance.
(python_string_to_host_string): Likewise.
2007-02-26 Pedro Alves <pedro@codesourcery.com>
* mips-linux-nat.c (mips64_linux_fetch_registers): Pass `ops' to
call to super_fetch_registers.
(mips64_linux_store_registers): Pass `ops' to call to
super_store_registers.
2009-02-25 Doug Evans <dje@google.com>
* breakpoint.c (insert_bp_location): Add \n to overlay breakpoint
error message.
* breakpoint.c (disable_breakpoints_in_shlibs): Delete local
disabled_shlib_breaks, unused.
* printcmd.c (build_address_symbolic): Fix comment.
2009-02-25 Hui Zhu <teawater@gmail.com>
* cli/cli-script.c (define_command): Add _() to query.
* gnu-nat.c (inf_validate_task_sc): Ditto.
* infcmd.c (kill_if_already_running): Ditto.
(jump_command): Ditto.
(attach_command): Ditto.
* inflow.c (kill_command): Ditto.
* infrun.c (handle_command): Ditto.
* maint.c (maintenance_dump_me): Ditto.
* memattr.c (mem_delete_command): Ditto.
* monitor.c (monitor_interrupt_query): Ditto.
* nto-procfs.c (interrupt_query): Ditto.
* printcmd.c (undisplay_command): Ditto.
* remote-mips.c (mips_kill): Ditto.
* remote.c (interrupt_query): Ditto.
* solib-irix.c (irix_open_symbol_file_object): Ditto.
* solib-osf.c (osf_open_symbol_file_object): Ditto.
* solib-pa64.c (pa64_open_symbol_file_object): Ditto.
* solib-som.c (som_open_symbol_file_object): Ditto.
* solib-svr4.c (open_symbol_file_object): Ditto.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Ditto.
* target.c (kill_or_be_killed): Ditto.
* tracepoint.c (delete_trace_command): Ditto.
* top.c (quit_confirm): Add _() to s that will be used
in query.
2009-02-24 Pierre Muller <muller@ics.u-strasbg.fr>
Fix windows-nat.c compilation failure.
* windows-nat.c (windows_thread_alive): Fix forward declaration.
(get_windows_debug_event): Add ops parameter to call to windows_resume.
2009-02-23 Pedro Alves <pedro@codesourcery.com>
* remote-sim.c (gdbsim_resume): Add target_ops* argument.
2009-02-23 Jay Krell <jay.krell@cornell.edu> (tiny change)
* symtab.c (find_line_symtab): Initialize exact to avoid
a compiler warning.
2009-02-23 Pedro Alves <pedro@codesourcery.com>
* i386-linux-nat.c (i386_linux_fetch_inferior_registers): Pass
`ops' to recursive call.
2009-02-23 Pedro Alves <pedro@codesourcery.com>
* corelow.c (get_core_registers): Adjust.
(core_file_thread_alive): Rename to...
(core_thread_alive): ... this.
(core_pid_to_str): Try gdbarch_core_pid_to_str first.
(init_core_ops): Adjust.
(coreops_suppress_target): Delete.
(_initialize_corelow): Unconditionally add core_ops.
* procfs.c: Include "inf-child.h".
(procfs_ops): Delete.
(init_procfs_ops): Delete. Reimplement as...
(procfs_target): ... this, inheriting from inf-child.
(procfs_attach, procfs_detach, procfs_fetch_registers): Adjust.
(procfs_prepare_to_store): Delete.
(procfs_store_registers, procfs_resume): Adjust.
(procfs_open): Delete.
(procfs_suppress_run): Delete.
(procfs_can_run): Delete.
(procfs_mourn_inferior): Adjust.
(procfs_init_inferior): Add target_ops parameter. Adjust.
(procfs_create_inferior): Don't pass procfs_init_inferior to
fork_inferior. Instead call it after fork_inferior returns.
(procfs_find_new_threads): Adjust.
(_initialize_procfs): Adjust to use procfs_target instead of
init_procfs_ops.
* sol-thread.c (orig_core_ops, sol_core_ops): Delete.
(lwp_to_thread): Use target_thread_alive.
(sol_thread_open): Delete.
(sol_thread_attach): Delete.
(sol_thread_detach, sol_thread_resume, sol_thread_wait)
(sol_thread_fetch_registers, sol_thread_store_registers): Adjust
to use find_target_beneath.
(sol_thread_prepare_to_store, sol_thread_xfer_memory): Delete.
(sol_thread_xfer_partial): Adjust to use find_target_beneath.
(sol_thread_files_info, sol_thread_kill_inferior): Delete.
(check_for_thread_db): New.
(sol_thread_notice_signals, sol_thread_create_inferior): Delete.
(sol_thread_new_objfile): Call check_for_thread_db.
(sol_thread_mourn_inferior): Adjust to use find_target_beneath.
(sol_thread_can_run): Delete.
(sol_thread_alive): Adjust to use find_target_beneath.
(sol_thread_stop): Delete.
(rw_common): Use target_write_memory or target_read_memory.
(ps_lgetregs, ps_lgetfpregs): Use target_fetch_registers.
(ps_lsetregs, ps_lsetfpregs): Use target_store_registers.
(solaris_pid_to_str): Remove check for libthread_db initialization
failing.
(sol_find_new_threads): Remove check for libthread_db
initialization failing, or for an invalid inferior_ptid. Adjust
to use find_target_beneath.
(sol_core_open, sol_core_close, sol_core_detach,
sol_core_files_info, sol_find_memory_regions,
sol_make_note_section, ignore): Delete.
(init_sol_thread_ops): Make it a thread_stratum target. Remove
unneeded callback settings.
(init_sol_core_ops): Delete.
(_initialize_sol_thread): No longer call init_sol_core_ops, set
procfs_suppress_run, or hack with core_ops.
* target.h (struct target_ops): Add a target_ops * parameter to
to_resume, to_fetch_registers, to_store_registers, to_thread_alive
and to_find_new_threads.
(target_fetch_registers, target_store_registers)
(target_thread_alive, target_find_new_threads): Redeclare as
function.
* target.c (update_current_target): Do not inherit or de_fault
to_resume, to_fetch_registers, to_store_registers,
to_thread_alive, to_find_new_threads.
(target_resume): Adjust.
(target_thread_alive, target_find_new_threads): New.
(debug_to_resume, debug_to_fetch_registers): Delete.
(target_fetch_registers): New.
(debug_to_store_registers): Delete.
(target_store_registers): New.
(debug_to_thread_alive, debug_to_find_new_threads): Delete.
(setup_target_debug): Adjust.
* gdbcore.h (core_ops): Delete declaration.
* inf-ptrace.c, linux-nat.c, remote.c, amd64-linux-nat.c,
inf-child.c, linux-thread-db.c, bsd-uthread.c, inf-ttrace.c,
i386-sol2-tdep.c, darwin-nat.c, gnu-nat.c, go32-nat.c,
hpux-thread.c, i386-linux-nat.c, i386fbsd-nat.c, monitor.c,
nto-procfs.c, remote-m32r-sdi.c, remote-mips.c, windows-nat.c,
alphabsd-nat.c, amd64bsd-nat.c, arm-linux-nat.c, armnbsd-nat.c,
bsd-kvm.c, hppa-hpux-nat.c, hppa-linux-nat.c, hppabsd-nat.c,
hppanbsd-nat.c, i386-darwin-nat.c, i386bsd-nat.c,
ia64-linux-nat.c, m32r-linux-nat.c, m68kbsd-nat.c,
m68klinux-nat.c, m88kbsd-nat.c, mips-linux-nat.c,
mips64obsd-nat.c, mipsnbsd-nat.c, ppc-linux-nat.c, ppcnbsd-nat.c,
ppcobsd-nat.c, remote-sim.c, rs6000-nat.c, s390-nat.c,
shnbsd-nat.c, sparc-nat.c, sparc-nat.h, spu-linux-nat.c,
vaxbsd-nat.c, xtensa-linux-nat.c: Adjust to target_ops changes.
* gdbarch.sh (core_pid_to_str): New gdbarch callback.
* gdbarch.h, gdbarch.c: Regenerate.
* sol2-tdep.c: Include "inferior.h".
(sol2_core_pid_to_str): New.
* sol2-tdep.h (sol2_core_pid_to_str): Declare.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
2009-02-22 Doug Evans <dje@google.com>
* exec.c (exec_file_attach): Fix comment.
2009-02-22 Pedro Alves <pedro@codesourcery.com>
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* alpha-linux-tdep.c (alpha_linux_regset_from_core_section): Make
it static.
* alpha-osf1-tdep.c (_initialize_alpha_osf1_tdep): Declare.
* amd64fbsd-tdep.c (amd64fbsd_init_abi): Make it static.
* amd64nbsd-tdep.c (_initialize_amd64nbsd_ndep): Rename to ...
(_initialize_amd64nbsd_tdep): ... this.
* arm-linux-tdep.c (arm_linux_software_single_step): Make it static.
(_initialize_arm_linux_tdep): Declare.
* armbsd-tdep.c (armbsd_fpreg_offset): Make it static.
* armnbsd-tdep.c (_initialize_arm_netbsd_tdep): Declare.
* armobsd-tdep.c (_initialize_armobsd_tdep): Declare.
* avr-tdep.c (avr_return_value): Make it static.
(avr_frame_unwind_cache): Ditto.
* bsd-uthread.c (bsd_uthread_inferior_created): Ditto.
(bsd_uthread_solib_loaded): Ditto.
(bsd_uthread_solib_unloaded): Ditto.
(bsd_uthread_target): Ditto.
(_initialize_bsd_uthread): Declare.
* cris-tdep.c (crisv32_single_step_through_delay): Make it static.
(cris_frame_unwind_cache): Ditto.
* frv-tdep.c (frv_return_value): Ditto.
* h8300-tdep.c (h8300_use_struct_convention): Ditto.
(h8300h_use_struct_convention): Ditto.
* hppa-tdep.c (hppa_sign_extend, hppa_low_hppa_sign_extend):
Ditto.
* hppa-tdep.h (hppa_low_sign_extend, hppa_sign_extend): Delete
declarations.
* hppabsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_find_global_pointer): Make it static.
* hppabsd-tdep.h: New.
* hppanbsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_init_abi): Remove declaration.
(_initialize_hppabsd_tdep): Remove declaration.
(_initialize_hppanbsd_tdep): Declare.
* hppaobsd-tdep.c: Include hppabsd-tdep.h.
(hppabsd_init_abi): Delete declaration.
(hppaobsd_init_abi): Make it static.
* i386-nto-tdep.c (_initialize_i386nto_tdep): Declare.
* i386nbsd-tdep.c (_initialize_i386nbsd_tdep): Declare.
* ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Declare.
* ia64-tdep.c (ia64_register_reggroup_p): Make it static.
* iq2000-tdep.c (_initialize_iq2000_tdep): Declare.
* m32c-tdep.c (m32c_register_reggroup_p): Make it static.
(m32c_analyze_prologue, m32c_virtual_frame_pointer): Ditto.
(_initialize_m32c_tdep): Declare.
* m32r-rom.c (_initialize_m32r_rom): Declare.
* m32r-tdep.c (m32r_skip_prologue): Make it static.
(m32r_return_value): Ditto.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Make it static.
(m68hc11_return_value): Ditto.
* m68klinux-tdep.c (_initialize_m68k_linux_tdep): Declare.
* m88k-tdep.c (m88k_frame_cache): Make it static.
* mep-tdep.c (mep_gdb_print_insn): Ditto.
(mep_return_value): Ditto.
(_initialize_mep_tdep): Declare.
* mips-irix-tdep.c (_initialize_mips_irix_tdep): Declare.
* mips-linux-tdep.c (supply_64bit_reg): Make it static.
(mips_linux_syscall_next_pc): Ditto.
(_initialize_mips_linux_tdep): Declare.
* mips-tdep.c (mips_single_step_through_delay): Make it static.
* mipsnbsd-tdep.c (_initialize_mipsnbsd_tdep): Declare.
* mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Declare.
* mn10300-tdep.c (_initialize_mn10300_tdep): Declare.
* mt-tdep.c (_initialize_mt_tdep): Declare.
* nbsd-tdep.c: Include nbsd-tdep.h.
* nto-tdep.c (find_load_phdr): Make it static.
(_initialize_nto_tdep): Declare.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Make it
static.
(_initialize_ppc_linux_tdep): Declare.
* remote-m32r-sdi.c (m32r_can_use_hw_watchpoint)
(m32r_insert_watchpoint, m32r_remove_watchpoint)
(m32r_stopped_data_address, m32r_stopped_by_watchpoint): Make
static.
* rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Declare.
* rs6000-nat.c: Include xcoffread.h.
(find_toc_address): Don't extern declare get_toc_offset. Adjust
to call xcoff_get_to_offset.
* rs6000-tdep.c (ppc_vsx_support_p, ppc_displaced_step_fixup)
(rs6000_skip_main_prologue, rs6000_in_solib_return_trampoline)
(rs6000_skip_trampoline_code): Make static.
* s390-tdep.c (s390_regset_from_core_section): Ditto.
* sh-tdep.c (sh_register_reggroup_p): Ditto.
* shnbsd-tdep.c (shnbsd_regset_from_core_section): Ditto.
(_initialize_shnbsd_tdep): Declare.
* solib-frv.c (displacement_from_map): Make static.
(_initialize_frv_solib): Declare.
* solib-irix.c (fetch_lm_info): Make static.
(_initialize_irix_solib): Declare.
* solib-som.c: Include solib-som.h.
(som_solib_select): Line break.
* sparc-tdep.c (sparc_regset_from_core_section): Make static.
* sparcnbsd-tdep.c (_initialize_sparnbsd_tdep): Rename to ...
(_initialize_sparcnbsd_tdep): ... this.
* spu-tdep.c (spu_software_single_step): Make it static.
(_initialize_spu_tdep): Declare.
* vax-tdep.c (vax_frame_cache): Make it static.
* xcoffread.c: Include xcoffread.h.
(get_toc_offset): Rename to ...
(xcoff_get_toc_offset): ... this.
(_initialize_xcoffread): Declare.
* xcoffread.h: New.
* xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Declare.
* xtensa-tdep.c (xtensa_skip_prologue, xtensa_derive_tdep): Make
static.
(_initialize_xtensa_tdep): Declare.
2008-02-21 Pedro Alves <pedro@codesorcery.com>
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
2009-02-20 Pierre Muller <muller@ics.u-strasbg.fr>
Extend use of i386_use_watchpoints to all i386 native files
using hardware watchpoints.
* go32-nat.c (init_go32_ops): Call i386_use_watchpoints.
* i386fbsd-nat.c (_initialize_i386fbsd_nat): Ditto.
* windows-nat.c (init_windows_ops): Ditto.
* config/i386/nm-cygwin.h: Define I386_WATCHPOINTS_IN_TARGET_VECTOR.
* config/i386/nm-cygwin64.h: Ditto.
* config/i386/nm-fbsd.h: Ditto.
* config/i386/nm-go32.h: Ditto.
2009-02-19 Joel Brobecker <brobecker@adacore.com>
* ada-typeprint.c (ada_typedef_print): Remove. Unused.
2009-02-18 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-interp.c (mi_solib_loaded, mi_solib_unloaded): New.
(mi_interpreter_init): Register the above.
* solib.c (clear_solib): Notify solib unload.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Do not
disable breakpoints on a.out targets.
2009-02-17 Vladimir Prus <vladimir@codesourcery.com>
* observer.c (observer_test_first_notification_function)
(observer_test_second_notification_function)
(observer_test_third_notification_function): Adjust prototype.
2009-02-17 Pedro Alves <pedro@codesourcery.com>
* Makefile.in (ALL_64_TARGET_OBS): Add amd64-dicos-tdep.o.
(ALL_TARGET_OBS): Add dicos-tdep.o.
(ALLDEPFILES): Add amd64-dicos-tdep.c and dicos-tdep.c.
* configure.tgt (i[34567]86-*-dicos*): Add dicos-tdep.o to
gdb_target_obs.
(x86_64-*-dicos*): Add dicos-tdep.o and amd64-dicos-tdep.o to
gdb_target_obs.
* dicos-tdep.h, dicos-tdep.c: New.
* amd64-dicos-tdep.c: New.
* i386-dicos-tdep.c: Don't include solib.h, solib-target.h or
inferior.h. Include dicos-tdep.h.
(i386_dicos_init_abi): Call dicos_init_abi.
(i386_dicos_bfd_has_symbol_p): Delete.
(i386_dicos_osabi_sniffer): Use dicos_load_module_p.
* NEWS: Mention x86-64 DICOS target support.
2009-02-16 Doug Evans <dje@google.com>
* amd64-tdep.c (amd64_skip_prefixes): Renamed from skip_prefixes.
All callers updated.
(amd64_get_insn_details): Handle more 3-byte opcode insns.
(amd64_breakpoint_p): Delete.
(amd64_displaced_step_fixup): When fixing up after stepping an int3,
don't back up pc to the start of the int3.
* i386-tdep.c: #include opcode/i386.h.
(i386_skip_prefixes): New function.
(i386_absolute_jmp_p): Constify argument.
(i386_absolute_call_p,i386_ret_p,i386_call_p,i386_syscall_p): Ditto.
(i386_breakpoint_p): Delete.
(i386_displaced_step_fixup): Handle unnecessary or redundant prefixes.
When fixing up after stepping an int3, don't back up pc to the start
of the int3.
2009-02-16 Pedro Alves <pedro@codesourcery.com>
* corelow.c (core_close): Don't hardcode the core's pid.
(core_open): Find core threads before calling
post_create_inferior.
(add_to_thread_list, get_core_register_section): Take into account
systems where the regset section names encode the pid of the
inferior.
* gdbarch.sh (core_reg_section_encodes_pid): New gdbarch setting.
* gdbarch.h, gdbarch.c: Regenerate.
* amd64-sol2-tdep.c (amd64_sol2_init_abi): Set it.
* i386-sol2-tdep.c (i386_sol2_init_abi): Set it.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Set it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Set it.
2009-02-14 Vladimir Prus <vladimir@codesourcery.com>
Include frame information for *stopped due to CLI commands.
* ada-tasks.c (ada_normal_stop_observer): Adjust prototype.
* infcmd.c (finish_command_continuation): Pass '1' for
'print_frame' parameter to the observer.
* infrun.c (normal_stop): Don't print mi-specific information
here. Pass 'stop_print_frame' to the 'print_frame' parameter
of the observer.
* mi/mi-interp.c (mi_on_normal_stop): Adjust prototype.
If we need to print frame, and current uiout is not the MI one,
print frame again.
2009-02-13 Pierre Muller <muller@ics.u-strasbg.fr>
* xtensa-tdep.c (call0_analyze_prologue): Delete BSZ macro.
Replace BSZ macro uses by XTENSA_ISA_BSZ macro.
2009-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
PR fortran/9806
* dwarf2read.c (process_die <DW_TAG_module>, read_module)
(scan_partial_symbols <DW_TAG_module>, add_partial_module): New.
2009-02-11 Pierre Muller <muller@ics.u-strasbg.fr>
* dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
for DW_ATE_signed_char and DW_ATE_unsigned_char
for pascal language.
2009-02-11 Jim Meyering <meyering@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Avoid NULL dereference.
* stack.c (return_command): Guard use of SYMBOL_TYPE (thisfun).
New variable func_type.
2009-02-11 Pedro Alves <pedro@codesourcery.com>
* gdbarch.c: Regenerate.
2009-02-10 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.c (is_pascal_string_type): Fix comment.
Determine exact size of char elements for GPC
strings.
(pascal_printstr): Handle char width of 2 or 4.
* p-valprint.c (pascal_val_print): Handle char
of width 2 or 4.
2009-02-07 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (dwarf2_build_psymtabs_hard): Move lowpc and highpc
inside the loop. Only call addrmap_set_empty if the compilation unit
had DW_AT_high_pc and DW_AT_low_pc. Update call to
scan_partial_symbols.
(scan_partial_symbols): Take NEED_PC argument and pass it along with
LOWPC and HIGHPC.
(add_partial_namespace): Take NEED_PC argument and pass it through.
(add_partial_subprogram): Take NEED_PC argument. Update the addrmap
if necessary.
2009-02-07 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention inspecting extra signal information, $_siginfo,
and the qXfer:siginfo:read and qXfer:siginfo:write packets.
2009-02-07 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (PTRACE_SETSIGINFO): Define if PTRACE_GETSIGINFO
isn't defined.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* amd64-linux-nat.c (compat_int_t, compat_uptr_t, compat_time_t)
(compat_timer_t, compat_clock_t, struct compat_timeval)
(compat_sigval_t, compat_siginfo_t): New types.
(cpt_si_pid, cpt_si_uid, cpt_si_timerid, cpt_si_overrun)
(cpt_si_status, cpt_si_utime, cpt_si_stime, cpt_si_ptr)
(cpt_si_addr, cpt_si_band, cpt_si_fd): New defines.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(amd64_linux_siginfo_fixup): New.
* linux-nat.c (linux_nat_siginfo_fixup): New.
(siginfo_fixup): New.
(linux_xfer_siginfo): Use siginfo_fixup to convert between the
siginfo layout expected by ptrace and the siginfo layout of the
inferior.
(linux_nat_set_siginfo_fixup): New.
* linux-nat.h (linux_nat_set_siginfo_fixup): Declare.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* target.h (enum target_object): Add new TARGET_OBJECT_SIGNAL_INFO.
* infrun.c (siginfo_value_read, siginfo_value_write): New.
(siginfo_value_funcs): New.
(siginfo_make_value): New.
(_initialize_infrun): Create the $_siginfo convenience variable.
* gdbtypes.h (append_composite_type_field_aligned): Declare.
* gdbtypes.c (append_composite_type_field): Rename to...
(append_composite_type_field_aligned): ... this. Add ALIGNMENT
argument. Handle it.
(append_composite_type_field): Rewrite on top of
append_composite_type_field_aligned.
* value.h (internalvar_make_value): New typedef.
(struct internalvar) <make_value>: New field.
(create_internalvar_type_lazy): Declare.
* value.c (create_internalvar): Clear make_value.
(create_internalvar_type_lazy): New.
(value_of_internalvar): If make_value is set use it.
(preserve_values): Skip internal variables that don't have a
value.
* gdbarch.sh (get_siginfo_type): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.h, linux-tdep.c: New.
* amd64-linux-tdep.c: Include "linux-tdep.h".
(amd64_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* i386-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* arm-linux-tdep.c: Include "linux-tdep.h".
(i386_linux_init_abi): Register linux_get_siginfo_type and
linux_get_siginfo_mapper.
* linux-nat.c (linux_xfer_siginfo): New.
(linux_nat_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
* remote.c (PACKET_qXfer_siginfo_read)
(PACKET_qXfer_siginfo_write): New.
(feature remote_protocol_features): Add "qXfer:siginfo:read" and
"qXfer:siginfo:write" features.
(remote_xfer_partial): Handle TARGET_OBJECT_SIGNAL_INFO.
(_initialize_remote): Add "set/show remote read-siginfo-object"
and "set/show remote write-siginfo-object" commands.
* Makefile.in (ALL_TARGET_OBS): Add linux-tdep.o.
(HFILES_NO_SRCDIR): Add linux-tdep.h.
(ALLDEPFILES): Add linux-tdep.c.
* configure.tgt (arm*-*-linux* | arm*-*-uclinux*)
(i[34567]86-*-linux*, x86_64-*-linux*): Add linux-tdep.o to
gdb_target_obs.
2009-02-06 Jim Blandy <jimb@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Vladimir Prus <vladimir@codesourcery.com>
Pedro Alves <pedro@codesourcery.com>
* defs.h (enum lval_type): New value: lval_computed.
* value.h (struct lval_funcs): New type.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New declarations.
* value.c (struct value): Add a structure to the location union
for computed lvalues, containing 'funcs' and 'closure' members.
(allocate_computed_value, value_computed_funcs)
(value_computed_closure): New functions.
(value_free): For computed lvalues, call the closure's
'free_closure' function before freeing the value itself.
(value_copy): If we're copying an lval_computed value, call the
closure's 'copy_closure' function.
(set_value_component_location): If the original value is a
computed lvalue, then call the closure's 'copy_closure' function.
(value_of_internalvar): If an internal variable's value is a
computed lvalue, make retrieving its value produce an equivalent
computed lvalue.
* valops.c (value_fetch_lazy): Unlazy computed lvalues by calling
their read function.
(value_assign): Assign to computed lvalues by calling their write
function.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_nat_wait): Adjust.
(linux_nat_pid_to_str): Adjust. Remove call to thread_db_init.
* linux-nat.h (thread_db_init): Delete declaration.
* linux-thread-db.c (target_beneath): Delete.
(thread_db_init): Delete.
(thread_db_detach): Use find_target_beneath.
(thread_db_wait): Adjust interface. Use find_target_beneath.
(thread_db_mourn_inferior): Use find_target_beneath.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): Delete.
(thread_db_pid_to_str): Adjust interface. Use
find_target_beneath.
(thread_db_get_thread_local_address): Adjust interface. Use
find_target_beneath.
(init_thread_db_ops): Delete references to delete functions.
* target.c (update_current_target): Don't inherit or default
to_wait. Don't inherit to_pid_to_str and
to_get_thread_local_address.
(target_translate_tls_address): Look for a pushed target that
implements to_get_thread_local_address, and use it instead of
checking for target_get_thread_local_address_p.
(target_wait, target_pid_to_str): Reimplement as functions.
(dummy_pid_to_str): New.
(init_dummy_target): Register it.
(debug_to_wait): Delete.
* target.h (struct target_ops): Make to_wait, to_pid_to_str and
to_get_thread_local_address accept a pointer to struct target_ops.
(target_wait): Delete macro, and declare as function.
(target_pid_to_str): Likewise.
(target_get_thread_local_address)
(target_get_thread_local_address_p): Delete.
(noprocess): Add NORETURN and ATTR_NORETURN tags.
* inf-ptrace.c (inf_ptrace_wait): Adjust.
(inf_ptrace_pid_to_str): New.
(inf_ptrace_target): Use inf_ptrace_pid_to_str.
* aix-thread.c (aix_thread_wait, aix_thread_pid_to_str): Adjust.
* bsd-kvm.c (bsd_kvm_pid_to_str): Adjust.
* bsd-uthread.c (bsd_uthread_wait, bsd_uthread_pid_to_str):
Adjust.
* corelow.c (core_pid_to_str): Adjust.
* darwin-nat.c (darwin_wait, darwin_pid_to_str): Adjust.
* dec-thread.c (dec_thread_wait, dec_thread_pid_to_str): Adjust.
* gnu-nat.c (gnu_wait, gnu_pid_to_str): Adjust.
* go32-nat.c (go32_wait, go32_pid_to_str): Adjust.
* hpux-thread.c (hpux_thread_wait): Adjust.
* inf-ttrace.c (inf_ttrace_wait, inf_ttrace_pid_to_str): Adjust.
* monitor.c (monitor_wait, monitor_pid_to_str): Adjust.
* nto-procfs.c (procfs_wait, procfs_pid_to_str): Adjust.
* procfs.c (procfs_pid_to_str): Adjust.
* remote-m32r-sdi.c (m32r_wait, m32r_pid_to_str): Adjust.
* remote-mips.c (mips_wait): Adjust.
* remote-sim.c (gdbsim_wait, gdbsim_pid_to_str): Adjust.
* remote.c (remote_wait, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
* rs6000-nat.c (rs6000_wait): Adjust.
* sol-thread.c (procfs_pid_to_str): Adjust declaration.
(sol_thread_wait, solaris_pid_to_str): Adjust.
* spu-linux-nat.c (spu_child_wait): Adjust.
* windows-nat.c (windows_wait, windows_pid_to_str): Adjust.
2009-02-06 Tom Tromey <tromey@redhat.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Add python-cmd.o.
(SUBDIR_PYTHON_SRCS): Add python-cmd.c.
(python-cmd.o): New target.
* cli/cli-decode.c (set_cmd_completer): Add self parameter to
completer prototype.
(add_cmd): Initialize destroyer member of cmd_list_element. Use
make_symbol_completion_list_fn as completer.
(delete_cmd): Call destroyer if one is set.
* cli/cli-decode.h (cmd_list_element): Add cmd parameter to
completer member. Add destroyer member.
(set_cmd_completer): Add self parameter to
completer prototype.
* command.h (set_cmd_completer): Add cmd parameter to
completer prototype.
* completer.c (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
to new completer prototype.
(complete_line_internal): Pass new parameter to completer function.
* completer.h (noop_completer, filename_completer,
location_completer, expression_completer, command_completer): Adapt
prototypes to new completer prototype.
* interps.c (interpreter_completer): Adapt to new completer
prototype.
* python/python-cmd.c: New file.
* python/python-internal.h (gdbpy_initialize_commands): Add
prototype.
(gdbpy_doc_cst): Add forward declaration.
* python/python.c (gdbpy_doc_cst): Declare.
(_initialize_python): Call gdbpy_initialize_commands. Initialize
gdbpy_doc_cst.
* symtab.c (make_symbol_completion_list_fn): New function.
* symtab.h (make_symbol_completion_list_fn): Add prototype.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* target.c (target_get_osdata): Check for equal or higher than
process_stratum, not dummy_stratum.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* remote.c (extended_remote_can_run): Delete.
(init_remote_ops): Don't register it.
* target.c (target_get_osdata): Don't check for target_can_run.
Instead any target that has already been pushed, otherwise
fallback to the default run target.
2009-02-06 Pedro Alves <pedro@codesourcery.com>
* target.c (target_create_inferior, target_detach)
(target_mourn_inferior, target_attach, target_close): Do target
debug output.
(debug_to_attach, debug_to_detach, debug_to_create_inferior)
(debug_to_mourn_inferior, debug_to_close): Delete.
(setup_target_debug): Adjust.
2009-02-05 Pedro Alves <pedro@codesourcery.com>
* target.h (target_stopped_data_address_p): Delete declaration,
and don't define as macro.
* target.c (target_stopped_data_address_p): Delete.
2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
Tom Tromey <tromey@redhat.com>
* python/python-utils.c (target_string_to_unicode): New function.
* python/python-internal.h (target_string_to_unicode): New prototype.
* python/python-value.c (valpy_string): New function.
(value_object_methods): Add `string' entry.
2009-02-05 Pedro Alves <pedro@codesourcery.com>
* target.h (target_tid_to_str): Delete.
* thread.c (print_thread_info, thread_apply_all_command)
(thread_apply_command, thread_command, do_captured_thread_select):
Use target_pid_to_str instead of target_tid_to_str.
* linux-fork.c (delete_fork_command): Likewise.
2009-02-05 Pedro Alves <pedro@codesourcery.com>
* frame.c (has_stack_frames): Make public.
(get_prev_frame): Don't allow a NULL this_frame anymore.
* frame.h (has_stack_frames): Declare.
* varobj.c (find_frame_addr_in_frame_chain): Don't ever pass NULL
to get_prev_frame, instead start at get_current_frame.
(varobj_create): Check has_stack_frames before getting any frame;
eliminate one usage of deprecated_safe_get_selected_frame.
2009-02-05 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* python/python.c (GdbMethods): Move to bottom of file.
(get_parameter, execute_gdb_command, gdbpy_write,
gdbpy_flush): Remove forward declarations.
(eval_python_from_control_command): Fix error checking of function
PyRun_SimpleString. Fix error string.
(python_command): Likewise.
(execute_gdb_command): Added from_tty argument.
2009-02-05 Thiago Jung Bauermann <bauerman@br.ibm.com>
* language.h (language_dfn): Add la_get_string member.
(LA_GET_STRING): New macro.
(default_get_string): New prototype.
* language.c (default_get_string): New function.
(unknown_language_defn, auto_language_defn, local_language_defn): Use
default_get_string for la_get_string.
* c-lang.c (c_get_string): New function.
(c_language_defn, cplus_language_defn, asm_language_defn): Use
c_get_string for la_get_string.
(minimal_language_defn): Likewise
* ada-lang.c (ada_language_defn): Likewise.
* f-lang.c (f_language_defn): Use default_get_string for
la_get_string.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (p_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise.
* typeprint.c (type_to_string): New function.
* value.h (type_to_string): New prototype.
* valprint.c (val_print_string): Factor out code for reading string
from the inferior into its own function. Put 2 spaces after period
in comments.
(read_string): New function.
* valprint.h (read_string): New prototype.
2009-01-07 Pierre Muller <muller@ics.u-strasbg.fr>
Tom Tromey <tromey@redhat.com>
PR breakpoints/8079:
* breakpoint.c (print_one_breakpoint): Use exp_string field
to display expression of watchpoints.
(mention): Likewise.
(watch_command_1): Remove trailing whitespace from expression.
* printcmd.c (struct display) <exp_string>: New field.
(display_command): Set exp_string.
(free_display): Free exp_string.
(clear_displays): Use free_display.
(do_one_display): Print exp_string.
(display_info): Likewise.
2009-02-04 Tom Tromey <tromey@redhat.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
Phil Muldoon <pmuldoon@redhat.com>
* python/python-internal.h (gdbpy_get_value_from_history): Rename
prototype to gdbpy_history.
(gdbpy_is_string): Declare.
(python_string_to_host_string): Declare.
* python/python-utils.c (gdbpy_is_string): New function.
(unicode_to_encoded_string): New function.
(unicode_to_target_string): Use it.
(python_string_to_host_string): New function.
* python/python-value.c (valpy_address): New function.
(convert_value_from_python): Use gdbpy_is_string. Change to throw
Python exception instead of a GDB exception on error. Properly check
Python booleans.
(valpy_getitem): Convert field name to host string. Handle array
accesses. Adapt to new behaviour of convert_value_from_python.
(valpy_new): Adapt to new behaviour of convert_value_from_python.
(enum valpy_opcode) <VALPY_LSH, VALPY_RSH, VALPY_BITAND,
VALPY_BITXOR, VALPY_BITOR>: New constants.
(valpy_binop): Update. Adapt to new behaviour of
convert_value_from_python.
(valpy_invert): New function.
(valpy_lsh): Likewise.
(valpy_rsh): Likewise.
(valpy_and): Likewise.
(valpy_or): Likewise.
(valpy_xor): Likewise.
(valpy_richcompare): Call convert_value_from_python instead of doing
conversions itself.
(is_intlike, valpy_int, valpy_long, valpy_float): New functions.
(gdbpy_get_value_from_history): Rename
function to gdbpy_history.
(gdbpy_initialize_values): Don't set tp_new.
(value_object_type): Add valpy_new.
(value_object_methods): Add `address' entry.
(value_object_as_number): Update for new methods.
* python/python.c (GdbMethods): Rename entry from
`get_value_from_history' to `history'.
2009-02-04 Jerome Guitton <guitton@adacore.com>
* ada-lang.c (ada_template_to_fixed_record_type_1): Check size
of type to guard against a crash.
2009-02-04 Jerome Guitton <guitton@adacore.com>
* value.c (value_from_contents_and_address): Always return
a lval_memory value, even if address is null.
2009-02-04 Tristan Gingold <gingold@adacore.com>
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr): New function.
(amd64_darwin_sigcontext_addr): Ditto.
(darwin_dwarf_signal_frame_p): Ditto.
(i386_darwin_init_abi): Handle signal frames, use the const for
sc_num_regs.
(x86_darwin_init_abi_64): Ditto.
2009-02-04 Tristan Gingold <gingold@adacore.com>
* i386-tdep.c (i386_sigtramp_p): Make it public.
* i386-tdep.h (i386_sigtramp_p): Declare.
2009-02-04 Tristan Gingold <gingold@adacore.com>
* machoread.c (macho_symfile_read): Read minsymtab also from
shared libraries.
(macho_symfile_read): Try to read dwarf2 frame info from main
object file, but not from OSO files.
(macho_symfile_offsets): Update section names for latest BFD
changes.
* i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
(x86_darwin_init_abi_64): Ditto.
* solib-darwin.c: New file.
* solib-darwin.h: New file.
* configure.tgt: Add solib.o solib-darwin.o for Darwin.
2009-02-04 Tristan Gingold <gingold@adacore.com>
* solist.h (struct target_so_ops): Comment fallback behavior for
operation same.
2009-02-03 Tom Tromey <tromey@redhat.com>
* completer.c (add_struct_fields): Check type_name against NULL
before use.
2009-02-03 Joel Brobecker <brobecker@adacore.com>
* MAINTAINERS: Update Elena's email address.
2009-02-02 Joel Brobecker <brobecker@adacore.com>
* breakpoint (update_watchpoint): Minor comment adjustment.
2009-02-02 Tom Tromey <tromey@redhat.com>
PR gdb/9594:
* completer.c (count_struct_fields): Count method names.
(add_struct_fields): Add matching method names.
2009-02-02 Doug Evans <dje@google.com>
* configure.ac (gdbkt): Check both no_tcl/no_tk first, before
doing any further tcl/tk configury. Don't configure gdbtk if
tcl or tk check fails.
* aclocal.m4: Regenerate.
* configure: Regenerate.
2009-02-02 Tom Tromey <tromey@redhat.com>
PR exp/9059:
* valops.c (find_overload_match): Follow typedefs before taking
address of object argument.
2009-02-01 Doug Evans <dje@google.com>
* target.h (target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New function. Copied from
debug_to_wait. Add missing entries for TARGET_WAITKIND_SYSCALL_ENTRY,
TARGET_WAITKIND_SYSCALL_RETURN, TARGET_WAITKIND_IGNORE,
TARGET_WAITKIND_NO_HISTORY.
(debug_to_wait): Call it.
* infrun.c (wait_for_inferior): If debug_infrun, print result of
target_wait.
(fetch_inferior_event): Ditto.
2009-01-30 Tom Tromey <tromey@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove i386-cygwin-tdep.h.
2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
PR 8145.
* thread.c (do_captured_list_thread_ids): Report the current
thread id.
2009-01-30 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (create_breakpoint, create_breakpoints)
(break_command_really, set_breakpoint): New parameter enabled.
(create_breakpoint, break_command_really): Make breakpoint
disabled if so requested.
* breakpoint.h (set_breakpoint): New parameter enabled.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle the -d option.
2009-01-28 Doug Evans <dje@google.com>
* amd64-tdep.h (amd64_displaced_step_copy_insn): Declare.
(amd64_displaced_step_fixup): Declare.
* amd64-tdep.c: #include opcode/i386.h, dis-asm.h.
(amd64_arch_regmap): Move out of amd64_analyze_stack_align
and make static global.
(amd64_arch_regmap_len): New static global.
(amd64_arch_reg_to_regnum): New function.
(struct amd64_insn): New struct.
(struct displaced_step_closure): New struct.
(onebyte_has_modrm,twobyte_has_modrm): New static globals.
(rex_prefix_p,skip_prefixes)
(amd64_insn_length_fprintf,amd64_insn_length_init_dis)
(amd64_insn_length,amd64_get_unused_input_int_reg)
(amd64_get_insn_details,fixup_riprel,fixup_displaced_copy)
(amd64_displaced_step_copy_insn)
(amd64_absolute_jmp_p,amd64_absolute_call_p,amd64_ret_p)
(amd64_call_p,amd64_breakpoint_p,amd64_syscall_p)
(amd64_displaced_step_fixup): New functions.
* amd64-linux-tdep.c: #include arch-utils.h.
(amd64_linux_init_abi): Install displaced stepping support.
2009-01-28 Daniel Jacobowitz <dan@codesourcery.com>
Jerome Guitton <guitton@adacore.com>
* configure, config.in: Regenerated.
* configure.ac: Add --with-system-gdbinit.
* main.c (get_init_files): New.
(captured_main): Use get_init_files. Load system gdbinit before
$HOME/.gdbinit.
(print_gdb_help): Print location of init files.
2009-01-28 Pedro Alves <pedro@codesourcery.com>
* corefile.c (generic_search): Delete disabled code.
* gdbcore.h (generic_search): Delete declaration.
2009-01-26 Pedro Alves <pedro@codesourcery.com>
* linux-nat.c (linux_child_follow_fork): Copy attach_flag from the
parent to the child.
* inf-ttrace.c (inf_ttrace_follow_fork): Likewise.
* inf-ptrace.c (inf_ptrace_follow_fork): Likewise. Use
remove_breakpoints to remove breakpoints from the parent.
2009-01-26 Pedro Alves <pedro@codesourcery.com>
PR backtrace/9458, PR backtrace/8864:
* frame.c (create_new_frame): Update the frame's cached PC before
finding its unwinder. Use frame_id_build to build the new frame's
id.
* stack.c (parse_frame_specification_1): Correct setting ``addrs''
array values from the ``args'' array values.
2009-01-26 Pedro Alves <pedro@codesourcery.com>
* gdbtypes.c (alloc_type, alloc_type_instance, create_range_type)
(create_array_type, create_set_type, init_flags_type)
(copy_type_recursive): Replace pairs of calls to XALLOC and memset
with a call to XZALLOC or XCALLOC, and pairs of calls to
obstack_alloc and memset with a call to OBSTACK_ZALLOC.
2009-01-26 Pedro Alves <pedro@codesourcery.com>
Add "maint set|show internal-error|internal-warning quit|corefile
ask|yes|no" commands.
PR gdb/7580:
* utils.c (internal_problem_ask, internal_problem_yes)
(internal_problem_no, internal_problem_modes): New.
(struct internal_problem): Remove FIXME. Make should_quit and
should_dump_core types to char *.
(internal_vproblem, internal_error_problem)
(internal_warning_problem): Adjust.
(set_internal_problem_cmd, show_internal_problem_cmd): New dummy
functions.
(add_internal_problem_command): New.
(_initialize_utils): New.
2009-01-25 Pedro Alves <pedro@codesourcery.com>
* infcmd.c (program_info): Use paddress instead of casting stop_pc
to unsigned long.
2009-01-24 Pedro Alves <pedro@codesourcery.com>
* infrun.c (normal_stop): Don't call
deprecated_update_frame_pc_hack.
* frame.c (deprecated_update_frame_pc_hack)
(deprecated_update_frame_base_hack): Delete, and ...
(create_new_frame): ... inline here.
* frame.h (deprecated_update_frame_pc_hack)
(deprecated_update_frame_base_hack): Delete declarations.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
PR gdb/9664:
* infrun.c (normal_stop): Tag threads as stopped, and run the
hook-stop before printing the stack frame.
2009-01-22 Pedro Alves <pedro@codesourcery.com>
PR c++/9631:
* gnu-v3-abi.c (gnuv3_baseclass_offset): Call check_typedef on
vbasetype.
2009-01-20 Kazu Hirata <kazu@codesourcery.com>
* gdb/procfs.c (info_mappings_callback): Cast map->pr_size to
unsigned long.
2009-01-20 Daniel Jacobowitz <dan@codesourcery.com>
PR gdb/9346
* infcmd.c (signal_command): Do not specify a resume PC.
2009-01-19 Doug Evans <dje@google.com>
* dummy-frame.c (dummy_frame): Replace regcache member with
caller_state.
(dummy_frame_push): Replace caller_regcache arg with caller_state.
All callers updated.
(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
(dummy_frame_pop): Rewrite. Verify requested frame is in the
dummy frame stack. Restore program state.
(cleanup_dummy_frames): Rewrite.
(dummy_frame_sniffer): Update. Make static.
* dummy-frame.h (regcache,frame_info): Delete forward decls.
(inferior_thread_state): New forward decl.
(dummy_frame_push): Update prototype.
* frame.c (frame_pop): dummy_frame_pop now does all the work for
DUMMY_FRAMEs.
* infcall.c (breakpoint_auto_delete_contents): Delete.
(get_function_name,run_inferior_call): New fns.
(call_function_by_hand): Simplify by moving some code to
get_function_name, run_inferior_call. Inferior function call wrapped
in TRY_CATCH so there's less need for cleanups and all exits from
proceed are handled similarily. Detect program exit.
Detect program stopping in a different thread.
Make error messages more consistent.
* inferior.h (inferior_thread_state): Declare (opaque type).
(save_inferior_thread_state,restore_inferior_thread_state,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state, get_inferior_thread_state_regcache):
Declare.
(save_inferior_status): Update prototype.
* infrun.c: (normal_stop): When stopped for the completion of an
inferior function call, verify the expected stack frame kind.
(inferior_thread_state): New struct.
(save_inferior_thread_state,restore_inferior_thread_state,
do_restore_inferior_thread_state_cleanup,
make_cleanup_restore_inferior_thread_state,
discard_inferior_thread_state,
get_inferior_thread_state_regcache): New functions.
(inferior_status): Move stop_signal, stop_pc, registers to
inferior_thread_state. Remove restore_stack_info.
(save_inferior_status): Remove arg restore_stack_info.
All callers updated. Remove saving of state now saved by
save_inferior_thread_state.
(restore_inferior_status): Remove restoration of state now done by
restore_inferior_thread_state.
(discard_inferior_status): Remove freeing of registers, now done by
discard_inferior_thread_state.
2009-01-18 Pedro Alves <pedro@codesourcery.com>
* tui/tui-disasm.c (tui_vertical_disassem_scroll): Scroll one line
at a time, times NUM_TO_SCROLL.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Don't try to
fetch the selected frame if there is no stack.
2009-01-18 Pedro Alves <pedro@codesourcery.com>
PR gdb/9747:
* gdbthread.h (finish_thread_state, finish_thread_state_cleanup):
Declare.
* thread.c (finish_thread_state, finish_thread_state_cleanup): New.
* infrun.c (wait_for_inferior, fetch_inferior_event): If an error
is thrown while handling an event, finish the thread state.
(normal_stop): Use finish_thread_state cleanup.
* infcmd.c (run_command_1): If an error is thrown while starting
the inferior, finish the thread state.
2009-01-18 Pedro Alves <pedro@codesourcery.com>
* tui/tui-winsource.c (tui_update_breakpoint_info): In asm layout,
skip breakpoints without a location (pending breakpoints).
2009-01-18 Pedro Alves <pedro@codesourcery.com>
PR build/9186:
* hppa-hpux-tdep.c (hppa_hpux_write_pc): Remove 'return'.
2009-01-18 Nick Roberts <nickrob@snap.net.nz>
* thread.c (thread_command): Move call to annotate_thread_changed
to...
(do_captured_thread_select): ... here, to avoid printing an
annotation if the thread change generates an exception.
2009-01-16 Joel Brobecker <brobecker@adacore.com>
* NEWS: Document x86_64/MinGW as a new native configuration.
2009-01-16 Joel Brobecker <brobecker@adacore.com>
* NEWS: Move the documentation of "info os processes" to
the appropriate section (documenting the new commands).
2009-01-15 Doug Evans <dje@google.com>
* target.h (target_signal_to_string): Make return type const char *.
(target_signal_to_name): Ditto.
(target_signal_from_name): Make arg const char *.
* infrun.c (sig_print_info): Update.
* signals/signals.c (signals): Make array and struct members const.
(target_signal_to_string): Make return type const char *.
(target_signal_to_name): Ditto.
(target_signal_from_name): Make arg const char *.
2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
Tristan Gingold <gingold@adacore.com>
* solist.h (struct target_so_ops): New member bfd_open.
(solib_find): Add prototype.
(solib_bfd_fopen): Add prototype.
* solib.c (solib_find, solib_bfd_fopen): New functions, extracted
from solib_bfd_open.
(solib_bfd_open): Use ops->bfd_open override if present. Call
solib_find and solib_bfd_open otherwise.
* objfiles.h (OBJF_KEEPBFD): New define.
* objfiles.c (free_objfile): Do not close BFD if OBJF_KEEPBFD
objfile flag is set.
* solib.c (symbol_add_stub): Do not allocate second BFD for
shared library; use OBJF_KEEPBFD flag on solib objfile.
2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
* frame.c (get_frame_arch): Abort if called with NULL this_frame.
2009-01-15 Ulrich Weigand <uweigand@de.ibm.com>
* value.h (address_of_variable): Add prototype.
(locate_var_value): Remove prototype.
* findvar.c (read_var_value): Do not attempt to default frame
to selected frame.
(locate_var_value): Remove function.
* valops.c (value_of_variable): Retrieve selected frame for
symbols that require a frame when called with NULL block.
* valops.c (address_of_variable): New function.
* eval.c (evaluate_subexp_for_address): Call address_of_variable
instead of calling locate_var_value.
(evaluate_subexp_with_coercion): Likewise.
2009-01-14 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Document "define" for prefixed commands.
* cli/cli-cmds.c (show_user): Update calls to show_user_1. Call
show_user_1 for prefix commands.
* cli/cli-decode.c (help_cmd_list): Recurse for "help user-defined".
* cli/cli-script.c (validate_comname): Rewrite to handle prefix
commands. Return the containing command list.
(define_command, document_command): Update to handle prefix commands.
(show_user_1): Add prefix and name arguments. Handle prefix
commands.
* cli/cli-script.h (show_user_1): Update prototype.
2009-01-14 Kai Tietz <kai.tietz@onevision.com>
* mingw-ser.c (console_select_thread): Add return to make
compiler happy.
(pipe_select_thread): Likewise.
(file_select_thread): Likewise.
2009-01-14 Pedro Alves <pedro@codesourcery.com>
* mi/mi-main.c (mi_cmd_execute): Clean up parenthesis mess from
previous change.
2009-01-14 Pedro Alves <pedro@codesourcery.com>
* remote.c (extended_remote_mourn_1): Invalidate our notion of
current general thread.
2009-01-14 Pedro Alves <pedro@codesourcery.com>
* mi/mi-main.c (mi_cmd_execute): Also allow -list-thread-groups
without a live selected thread.
2009-01-14 Joel Brobecker <brobecker@adacore.com>
Update the copyright notice of some of the files I missed
in the previous copyright update.
2009-01-14 Joel Brobecker <brobecker@adacore.com>
* windows-nat.c (handle_unload_dll): Use %p to print the DLL
base address instead of casting it to DWORD.
2009-01-13 Ulrich Weigand <uweigand@de.ibm.com>
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Do not call get_frame_arch
for NULL frame pointers.
2009-01-13 Mark Kettenis <kettenis@gnu.org>
* utils.c (host_address_to_string): Reimplement in a way that
avoids the cast of the address to long.
2009-01-13 Joel Brobecker <brobecker@adacore.com>
* mdebugread.c (parse_symbol): Save the symbol private data
using SYMBOL_VALUE_BYTES instead of SYMBOL_VALUE.
(psymtab_to_symtab_1): Likewise.
(parse_procedure): Declare variable "e" only in the scope
where it is used. Extract the symbol private data using
SYMBOL_VALUE_BYTES.
2009-01-13 Jim Blandy <jimb@codesourcery.com>
Abstract out common code for copying value locations.
* value.h (set_value_component_location): New declaration.
* value.c (set_value_component_location): New function.
(value_primitive_field): Use it.
* valarith.c (value_subscript, value_subscripted_rvalue): Same.
* valops.c (search_struct_field, value_slice): Same.
* ada-lang.c (coerce_unspec_val_to_type)
(ada_value_primitive_packed_val): Same.
2009-01-13 Joel Brobecker <brobecker@adacore.com>
* MAINTAINERS (GLOBAL MAINTAINERS): Add Tom Tromey.
2009-01-12 Christopher Faylor <me+cygwin@cgf.cx>
* amd64-windows-nat.c Rename gdb-specific win32_* to windows_*
throughout.
* i386-cygwin-tdep.c: Ditto.
* i386-windows-nat.c: Ditto.
* windows-nat.h: Ditto.
* windows-tdep.c: Ditto.
* windows-tdep.h: Ditto.
* windows-nat.c: Ditto.
(cygwin_load_start): Redefine as CORE_ADDR.
(cygwin_load_end): Ditto.
(windows_make_so): Coerce result of address arithmetic to uintptr_t
before coercing to CORE_ADDR to avoid a compiler warning.
(handle_exception): Define addr as CORE_ADDR and coerce
ExceptionAddress to uintptr_t before assigining to avoid a compiler
warning.
* config/djgpp/fnchange.lst: Add mappings for recently renamed windows
files.
2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix linking with --enable-targets=all:
* Makefile.in (ALL_TARGET_OBS): Add windows-tdep.o.
(HFILES_NO_SRCDIR): Add windows-tdep.h.
(ALLDEPFILES): Add windows-tdep.c.
2009-01-11 Chris Faylor <me.gdb@cgf.cx>
* win32-nat.h: Delete.
* windows-nat.h: Rename from win32-nat.h.
* win32-nat.c: Delete.
* windows-nat.c: Rename from win32-nat.c.
* win32-termcap.c: Delete.
* windows-termcap.c: Rename from win32-termcap.c.
* amd64-windows-nat.c: Handle rename from win32-nat.h -> windows-nat.h.
* configure.ac: Handle rename from win32-termcap.c ->
windows-termcap.c.
* configure: Regenerate.
* gdb_curses.h: Change comment to reflect rename from win32-termcap.c
-> windows-termcap.c.
* i386-cygwin-tdep.c: Handle rename from win32-tdep.h ->
windows-tdep.h.
* i386-windows-nat.c: Refect rename from win32-nat.h -> windows-nat.h.
* windows-nat.c: Ditto. Also reflect rename from from win32-tdep.h ->
windows-tdep.h.
(win32_make_so): Handle cygwin compiler warning due to change of
load_addr from DWORD to LPVOID.
(handle_load_dll): Use %p in format string to properly print address
and avoid a compiler warning.
(DEBUG_EXCEPTION_SIMPLE): Ditto.
(handle_exception): Ditto.
* windows-tdep.c: Handle rename from win32-tdep.h -> windows-tdep.h.
* config/i386/cygwin.mh: Handle rename from win32-nat.o ->
windows-nat.o.
* config/i386/mingw.mh: Ditto.
* config/i386/mingw64.mh: Ditto.
2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* f-typeprint.c (f_type_print_varspec_suffix): Convert the autovariable
arrayprint_recurse_level to a parameter. Update all the callers. New
comment at autovariables.
2009-01-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdbtypes.c (make_qualified_type, replace_type): Reformat to the GNU
coding style.
2009-01-11 Joel Brobecker <brobecker@adacore.com>
* target.c (target_xfer_partial): Use host_address_to_string to
print the address of readbuf and writebuf. Cast the address of
elements inside the myaddr buffer into intptr_t.
(deprecated_debug_xfer_memory): Use paddress to print memaddr.
Cast the address of elements inside the myaddr buffer into
intptr_t.
2009-01-11 Joel Brobecker <brobecker@adacore.com>
* amd64-windows-nat.c, amd64-windows-tdep.c: New files.
* config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
* configure.host, configure.tgt: Add handling for x86_64/windows.
* config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
and amd64-windows-tdep.c.
2009-01-11 Joel Brobecker <brobecker@adacore.com>
* win32-tdep.h, win32-tdep.c: New files.
* i386-cygwin-tdep.h: Delete.
* i386-cygwin-tdep.c: Include win32-tdep.h instead of
i386-cygwin-tdep.h.
(win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
* win32-nat.c: Likewise.
* configure.tgt: Add win32-tdep.o to the list of target object
files for i386-cygwin and i386-mingw targets.
2009-01-11 Joel Brobecker <brobecker@adacore.com>
* win32-nat.h: New file.
* win32-nat.c (mappings): Initialize to NULL.
(win32_set_context_register_offsets): New function.
* i386-windows-nat.c: New file.
(mappings): Moved here from win32-nat.c.
(_initialize_i386_windows_nat): New function.
* config/i386/mingw.mh (NATDEPFILES): Add i386-windows-nat.o.
* config/i386/cygwin.mh (NATDEPFILES): Likewise.
2009-01-09 Andreas Schwab <schwab@suse.de>
* Makefile.in (init.c): Set LANG/LC_ALL to C, not c.
2009-01-09 Daniel Jacobowitz <dan@codesourcery.com>
* gdbtypes.c (append_composite_type_field): Correct the location of
appended fields.
2009-01-09 Pedro Alves <pedro@codesourcery.com>
* defs.h (deprecated_error_hook): Delete declaration.
* interps.c (clear_interpreter_hooks): Adjust.
* remote-sim.c (gdb_os_error): Don't try to call
deprecated_error_hook. No need to call exit anymore.
* top.c (deprecated_error_hook): Delete.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* arch-utils.c (gdbarch_update_p): Use host_address_to_string
to print the address of the gdbarch pointer.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* gdbarch.sh: Fix all the compilation errors on amd64-windows
due to casting a pointer to a long when printing a function
address. Instead, use host_address_to_string to convert our
address to a string.
* gdbarch.c: Regenerate.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* event-top.c (async_disconnect, async_stop_sig): use "raise"
instead of "kill" to raise a signal.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (get_module_name): Change the type of parameter
"base_address" to LPVOID. Remove unnecessary cast.
(struct lm_info): Change type of load_addr to LPVOID.
(win32_make_so): Change the type of parameter "load_addr"
to LPVOID. Remove some unnecessary casts.
(handle_unload_dll): Change the type of "lpBaseOfDll" to LPVOID.
(win32_xfer_shared_libraries): Add missing cast.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (has_detach_ability, set_process_privilege):
Cast the result of GetProcAddress to (void *) to avoid
a compilation warning.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (CONTEXT_EXTENDED_REGISTERS): Define to 0 if not
already defined.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (get_image_name, win32_xfer_memory): Fix type
definition of local variable "done".
(info_w32_command, handle_exception): Remove unnecessary cast.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (kernel32_DebugSetProcessKillOnExit): Renames
DebugSetProcessKillOnExit. Update all uses in this file.
(kernel32_DebugActiveProcessStop): Renames DebugActiveProcessStop.
Update all uses in this file.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* win32-nat.c (do_initial_win32_stuff): Add new ops parameter,
and use it when pushing the target.
(win32_attach, win32_create_inferior): Update call to
do_initial_win32_stuff.
(win32_detach, win32_mourn_inferior): Use our ops parameter
instead of the global win32_ops to unpush the target.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* ser-mingw.c (ser_windows_open): Use proper type when casting
in call to _open_osfhandle.
2009-01-09 Kai Tietz <kai.tietz@onevision.com>
* coff-pe-read.c (read_pe_exported_syms): Fix typo.
2009-01-09 Joel Brobecker <brobecker@adacore.com>
* CONTRIBUTE: Minor reformatting.
2009-01-08 Kai Tietz <kai.tietz@onevision.com>
* MAINTAINERS: Add myself to Write After Approval.
* coff-pe-read.c (read_pe_exported_syms): Enable read of PE+
export directory.
2009-01-08 Nathan Froyd <froydnj@codesourcery.com>
* remote-sim.c (gdb_os_error): Mark as a noreturn function.
Call exit to make it obvious to GCC.
2009-01-08 Tom Tromey <tromey@redhat.com>
PR breakpoints/9350:
* varobj.c (varobj_invalidate): Unconditionally free
all_rootvarobj.
* symfile.c (syms_from_objfile): Free local_addr when returning
normally.
* exec.c (exec_file_attach): Do cleanups before returning.
(exec_file_command): Likewise.
* corefile.c (reopen_exec_file): Do cleanups before returning.
* breakpoint.c (insert_breakpoint_locations): Do cleanups before
returning.
(do_vec_free): New function.
(update_global_location_list): Make a cleanup for old_locations.
Do cleanups before returning. Remove unused variable 'e'.
(find_condition_and_thread): Free result of parsing the
expression.
(print_it_typical): Do cleanups before returning.
(breakpoint_re_set_one): Always free sals.sals.
2009-01-08 Joel Brobecker <brobecker@adacore.com>
Emi Suzuki <emi-suzuki@tjsys.co.jp>
* breakpoint.c (do_enable_breakpoint): Use update_watchpoint for
watchpoints.
2009-01-07 Doug Evans <dje@google.com>
* top.c (gdb_prompt_string): Delete, unused.
2009-01-07 Pedro Alves <pedro@codesourcery.com>
Delete ONE_PROCESS_WRITETEXT leftovers.
* breakpoint.c (insert_bp_location): Delete process_warning
argument. Adjust.
(insert_breakpoint_locations): Adjust.
(reattach_breakpoints): Adjust.
* infrun.c (normal_stop): Drop "It might be running in another
process" notice.
2009-01-07 Stan Shebs <stan@codesourcery.com>
* config/pa/linux.mh (XDEPFILES): Remove.
2009-01-07 Doug Evans <dje@google.com>
* cli/cli-cmds.c (set_debug): Fix cut-n-paste error.
2009-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* f-typeprint.c (f_type_print_base <TYPE_CODE_STRUCT>): Fix output
spacing, a regression from 2008-04-22.
2009-01-07 Joel Brobecker <brobecker@adacore.com>
* utils.c (gdb_print_host_address): Adjust implementation to
reuse host_address_to_string. Move comment explaining the conversion
from host address to string from here...
(host_address_to_string): ... to there.
2009-01-07 Emi Suzuki <emi-suzuki@tjsys.co.jp>
* MAINTAINERS: Add myself for write after approval privileges.
2009-01-06 Tom Tromey <tromey@redhat.com>
* value.c (set_internalvar): Use value_free, not xfree.
2009-01-06 Jim Blandy <jimb@red-bean.com>
Check return values of functions declared with warn_unused_result
attribute in GLIBC 2.8.
* cli/cli-cmds.c (pwd_command): Check return value from getcwd.
* inflow.c (check_syscall): New function.
(new_tty): Use check_syscall to check return values from open and dup.
* linux-nat.c (linux_nat_info_proc_cmd): Check return value from fgets.
* main.c (captured_main): Call cwd after setting up gdb_stderr;
check for errors from getcwd.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Check return value from getcwd.
* ui-file.c (stdio_file_write): Ignore return value from fwrite.
(stdio_file_fputs): Same.
* utils.c (internal_vproblem): abort if last-ditch error message
write fails.
* top.c (gdb_init): Don't set the current directory here; that's
already been done in captured_main.
2009-01-06 Sandra Loosemore <sandra@codesourcery.com>
* ser-tcp.c: Adjust includes.
(tcp_set_cmdlist, tcp_show_cmdlist): Declare.
(tcp_auto_retry, tcp_retry_limit): Declare.
(TIMEOUT): Remove, in favor of tcp_retry_limit.
(POLL_INTERVAL): Increase to 5, in favor of backoff logic.
(wait_for_connect): New function.
(net_open): Use it. Add auto-retry logic.
(set_tcp_cmd, show_tcp_cmd): New functions.
(_initialize_ser_tcp): Initialize new "set/show tcp auto-retry"
and "set/show tcp connect-timeout" commands.
* NEWS: Document new commands.
2009-01-05 Tom Tromey <tromey@redhat.com>
* python/python-internal.h (Py_ssize_t): Define as int.
2009-01-05 Jim Blandy <jimb@red-bean.com>
* MAINTAINERS: Fix my e-mail address as steering committee member.
2009-01-03 Joel Brobecker <brobecker@adacore.com>
Updated copyright notices for most files.
2009-01-03 Joel Brobecker <brobecker@adacore.com>
* top.c (print_gdb_version): Update copyright year.
2009-01-03 Joel Brobecker <brobecker@adacore.com>
* config/djgpp/fnchange.lst: Add entry for ChangeLog-2008.
2009-01-01 Pedro Alves <pedro@codesourcery.com>
PR breakpoints/9681:
* exceptions.h (enum errors): New error type, MEMORY_ERROR.
* corefile.c (memory_error): Rewrite to throw a MEMORY_ERROR.
* breakpoint.c (fetch_watchpoint_value): Ignore MEMORY_ERRORs, but
retrow all other exceptions.
For older changes see ChangeLog-2008.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
coding: utf-8
End:
Reference in a new issue View git blame Copy permalink