2ed3c037cf
This patch fixes a problem that prevented use of the Dwarf unwinders on SPU, because dwarf2-frame.c common code did not support the situation where the stack and/or frame pointer is maintained in a *vector* register. This is because read_addr_from_reg is hard-coded to assume that such pointers can be read from registers via a simple get_frame_register / unpack_pointer operation. Now, there *is* a routine address_from_register that calls into the appropriate tdep routines to handle pointer values in "weird" registers like on SPU, but it turns out I cannot simply change dwarf2-frame.c to use address_from_register. This is because address_from_register uses value_from_register to create a (temporary) value, and that routine at some point calls get_frame_id in order to set up that value's VALUE_FRAME_ID entry. However, the dwarf2-frame.c read_addr_from_reg routine will be called during early unwinding (to unwind the frame's CFA), at which point the frame's ID is not actually known yet! This would cause an assert. On the other hand, we may notice that VALUE_FRAME_ID is only needed in the value returned by value_from_register if that value is later used as an lvalue. But this is obviously never done to the temporary value used in address_from_register. So, if we could change address_from_register to not call value_from_register but instead accept constructing a value that doesn't have VALUE_FRAME_ID set, things should be fine. To do that, we can change the value_from_register callback to accept a FRAME_ID instead of a FRAME; the only existing uses of the FRAME argument were either to extract its frame ID, or its gdbarch. (To keep a way of getting at the latter, we also change the callback's type from "f" to "m".) Together with the required follow-on changes in the existing value_from_register implementations (including the default one), this seems to fix the problem. As another minor interface cleanup, I've removed the explicit TYPE argument from address_from_register. This routine really always uses a default pointer type, and in the new implementation it -to some extent- relies on that fact, in that it will now no longer handle types that require gdbarch_convert_register_p handling. gdb: 2014-04-17 Ulrich Weigand <uweigand@de.ibm.com> * gdbarch.sh (value_from_register): Make class "m" instead of "f". Replace FRAME argument with FRAME_ID. * gdbarch.c, gdbarch.h: Regenerate. * findvar.c (default_value_from_register): Add GDBARCH argument; replace FRAME by FRAME_ID. No longer call get_frame_id. (value_from_register): Update call to gdbarch_value_from_register. * value.h (default_value_from_register): Update prototype. * s390-linux-tdep.c (s390_value_from_register): Update interface and call to default_value_from_register. * spu-tdep.c (spu_value_from_register): Likewise. * findvar.c (address_from_register): Remove TYPE argument. Do not call value_from_register; use gdbarch_value_from_register with null_frame_id instead. * value.h (address_from_register): Update prototype. * dwarf2-frame.c (read_addr_from_reg): Use address_from_register. * dwarf2loc.c (dwarf_expr_read_addr_from_reg): Update for address_from_register interface change.
3446 lines
104 KiB
C
3446 lines
104 KiB
C
/* Target-dependent code for GDB, the GNU debugger.
|
|
|
|
Copyright (C) 2001-2014 Free Software Foundation, Inc.
|
|
|
|
Contributed by D.J. Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
|
|
for IBM Deutschland Entwicklung GmbH, IBM Corporation.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "defs.h"
|
|
#include "arch-utils.h"
|
|
#include "frame.h"
|
|
#include "inferior.h"
|
|
#include "symtab.h"
|
|
#include "target.h"
|
|
#include "gdbcore.h"
|
|
#include "gdbcmd.h"
|
|
#include "objfiles.h"
|
|
#include "floatformat.h"
|
|
#include "regcache.h"
|
|
#include "trad-frame.h"
|
|
#include "frame-base.h"
|
|
#include "frame-unwind.h"
|
|
#include "dwarf2-frame.h"
|
|
#include "reggroups.h"
|
|
#include "regset.h"
|
|
#include "value.h"
|
|
#include "gdb_assert.h"
|
|
#include "dis-asm.h"
|
|
#include "solib-svr4.h"
|
|
#include "prologue-value.h"
|
|
#include "linux-tdep.h"
|
|
#include "s390-linux-tdep.h"
|
|
#include "auxv.h"
|
|
#include "xml-syscall.h"
|
|
|
|
#include "stap-probe.h"
|
|
#include "ax.h"
|
|
#include "ax-gdb.h"
|
|
#include "user-regs.h"
|
|
#include "cli/cli-utils.h"
|
|
#include <ctype.h>
|
|
#include "elf/common.h"
|
|
|
|
#include "features/s390-linux32.c"
|
|
#include "features/s390-linux32v1.c"
|
|
#include "features/s390-linux32v2.c"
|
|
#include "features/s390-linux64.c"
|
|
#include "features/s390-linux64v1.c"
|
|
#include "features/s390-linux64v2.c"
|
|
#include "features/s390-te-linux64.c"
|
|
#include "features/s390x-linux64.c"
|
|
#include "features/s390x-linux64v1.c"
|
|
#include "features/s390x-linux64v2.c"
|
|
#include "features/s390x-te-linux64.c"
|
|
|
|
#define XML_SYSCALL_FILENAME_S390 "syscalls/s390-linux.xml"
|
|
#define XML_SYSCALL_FILENAME_S390X "syscalls/s390x-linux.xml"
|
|
|
|
/* The tdep structure. */
|
|
|
|
struct gdbarch_tdep
|
|
{
|
|
/* ABI version. */
|
|
enum { ABI_LINUX_S390, ABI_LINUX_ZSERIES } abi;
|
|
|
|
/* Pseudo register numbers. */
|
|
int gpr_full_regnum;
|
|
int pc_regnum;
|
|
int cc_regnum;
|
|
|
|
/* Core file register sets. */
|
|
const struct regset *gregset;
|
|
int sizeof_gregset;
|
|
|
|
const struct regset *fpregset;
|
|
int sizeof_fpregset;
|
|
};
|
|
|
|
|
|
/* ABI call-saved register information. */
|
|
|
|
static int
|
|
s390_register_call_saved (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
switch (tdep->abi)
|
|
{
|
|
case ABI_LINUX_S390:
|
|
if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
|
|
|| regnum == S390_F4_REGNUM || regnum == S390_F6_REGNUM
|
|
|| regnum == S390_A0_REGNUM)
|
|
return 1;
|
|
|
|
break;
|
|
|
|
case ABI_LINUX_ZSERIES:
|
|
if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
|
|
|| (regnum >= S390_F8_REGNUM && regnum <= S390_F15_REGNUM)
|
|
|| (regnum >= S390_A0_REGNUM && regnum <= S390_A1_REGNUM))
|
|
return 1;
|
|
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
s390_cannot_store_register (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
/* The last-break address is read-only. */
|
|
return regnum == S390_LAST_BREAK_REGNUM;
|
|
}
|
|
|
|
static void
|
|
s390_write_pc (struct regcache *regcache, CORE_ADDR pc)
|
|
{
|
|
struct gdbarch *gdbarch = get_regcache_arch (regcache);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
regcache_cooked_write_unsigned (regcache, tdep->pc_regnum, pc);
|
|
|
|
/* Set special SYSTEM_CALL register to 0 to prevent the kernel from
|
|
messing with the PC we just installed, if we happen to be within
|
|
an interrupted system call that the kernel wants to restart.
|
|
|
|
Note that after we return from the dummy call, the SYSTEM_CALL and
|
|
ORIG_R2 registers will be automatically restored, and the kernel
|
|
continues to restart the system call at this point. */
|
|
if (register_size (gdbarch, S390_SYSTEM_CALL_REGNUM) > 0)
|
|
regcache_cooked_write_unsigned (regcache, S390_SYSTEM_CALL_REGNUM, 0);
|
|
}
|
|
|
|
|
|
/* DWARF Register Mapping. */
|
|
|
|
static const short s390_dwarf_regmap[] =
|
|
{
|
|
/* General Purpose Registers. */
|
|
S390_R0_REGNUM, S390_R1_REGNUM, S390_R2_REGNUM, S390_R3_REGNUM,
|
|
S390_R4_REGNUM, S390_R5_REGNUM, S390_R6_REGNUM, S390_R7_REGNUM,
|
|
S390_R8_REGNUM, S390_R9_REGNUM, S390_R10_REGNUM, S390_R11_REGNUM,
|
|
S390_R12_REGNUM, S390_R13_REGNUM, S390_R14_REGNUM, S390_R15_REGNUM,
|
|
|
|
/* Floating Point Registers. */
|
|
S390_F0_REGNUM, S390_F2_REGNUM, S390_F4_REGNUM, S390_F6_REGNUM,
|
|
S390_F1_REGNUM, S390_F3_REGNUM, S390_F5_REGNUM, S390_F7_REGNUM,
|
|
S390_F8_REGNUM, S390_F10_REGNUM, S390_F12_REGNUM, S390_F14_REGNUM,
|
|
S390_F9_REGNUM, S390_F11_REGNUM, S390_F13_REGNUM, S390_F15_REGNUM,
|
|
|
|
/* Control Registers (not mapped). */
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1,
|
|
|
|
/* Access Registers. */
|
|
S390_A0_REGNUM, S390_A1_REGNUM, S390_A2_REGNUM, S390_A3_REGNUM,
|
|
S390_A4_REGNUM, S390_A5_REGNUM, S390_A6_REGNUM, S390_A7_REGNUM,
|
|
S390_A8_REGNUM, S390_A9_REGNUM, S390_A10_REGNUM, S390_A11_REGNUM,
|
|
S390_A12_REGNUM, S390_A13_REGNUM, S390_A14_REGNUM, S390_A15_REGNUM,
|
|
|
|
/* Program Status Word. */
|
|
S390_PSWM_REGNUM,
|
|
S390_PSWA_REGNUM,
|
|
|
|
/* GPR Lower Half Access. */
|
|
S390_R0_REGNUM, S390_R1_REGNUM, S390_R2_REGNUM, S390_R3_REGNUM,
|
|
S390_R4_REGNUM, S390_R5_REGNUM, S390_R6_REGNUM, S390_R7_REGNUM,
|
|
S390_R8_REGNUM, S390_R9_REGNUM, S390_R10_REGNUM, S390_R11_REGNUM,
|
|
S390_R12_REGNUM, S390_R13_REGNUM, S390_R14_REGNUM, S390_R15_REGNUM,
|
|
|
|
/* GNU/Linux-specific registers (not mapped). */
|
|
-1, -1, -1,
|
|
};
|
|
|
|
/* Convert DWARF register number REG to the appropriate register
|
|
number used by GDB. */
|
|
static int
|
|
s390_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
/* In a 32-on-64 debug scenario, debug info refers to the full 64-bit
|
|
GPRs. Note that call frame information still refers to the 32-bit
|
|
lower halves, because s390_adjust_frame_regnum uses register numbers
|
|
66 .. 81 to access GPRs. */
|
|
if (tdep->gpr_full_regnum != -1 && reg >= 0 && reg < 16)
|
|
return tdep->gpr_full_regnum + reg;
|
|
|
|
if (reg >= 0 && reg < ARRAY_SIZE (s390_dwarf_regmap))
|
|
return s390_dwarf_regmap[reg];
|
|
|
|
warning (_("Unmapped DWARF Register #%d encountered."), reg);
|
|
return -1;
|
|
}
|
|
|
|
/* Translate a .eh_frame register to DWARF register, or adjust a
|
|
.debug_frame register. */
|
|
static int
|
|
s390_adjust_frame_regnum (struct gdbarch *gdbarch, int num, int eh_frame_p)
|
|
{
|
|
/* See s390_dwarf_reg_to_regnum for comments. */
|
|
return (num >= 0 && num < 16)? num + 66 : num;
|
|
}
|
|
|
|
|
|
/* Pseudo registers. */
|
|
|
|
static int
|
|
regnum_is_gpr_full (struct gdbarch_tdep *tdep, int regnum)
|
|
{
|
|
return (tdep->gpr_full_regnum != -1
|
|
&& regnum >= tdep->gpr_full_regnum
|
|
&& regnum <= tdep->gpr_full_regnum + 15);
|
|
}
|
|
|
|
static const char *
|
|
s390_pseudo_register_name (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
if (regnum == tdep->pc_regnum)
|
|
return "pc";
|
|
|
|
if (regnum == tdep->cc_regnum)
|
|
return "cc";
|
|
|
|
if (regnum_is_gpr_full (tdep, regnum))
|
|
{
|
|
static const char *full_name[] = {
|
|
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
|
|
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
|
|
};
|
|
return full_name[regnum - tdep->gpr_full_regnum];
|
|
}
|
|
|
|
internal_error (__FILE__, __LINE__, _("invalid regnum"));
|
|
}
|
|
|
|
static struct type *
|
|
s390_pseudo_register_type (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
if (regnum == tdep->pc_regnum)
|
|
return builtin_type (gdbarch)->builtin_func_ptr;
|
|
|
|
if (regnum == tdep->cc_regnum)
|
|
return builtin_type (gdbarch)->builtin_int;
|
|
|
|
if (regnum_is_gpr_full (tdep, regnum))
|
|
return builtin_type (gdbarch)->builtin_uint64;
|
|
|
|
internal_error (__FILE__, __LINE__, _("invalid regnum"));
|
|
}
|
|
|
|
static enum register_status
|
|
s390_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
|
|
int regnum, gdb_byte *buf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int regsize = register_size (gdbarch, regnum);
|
|
ULONGEST val;
|
|
|
|
if (regnum == tdep->pc_regnum)
|
|
{
|
|
enum register_status status;
|
|
|
|
status = regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &val);
|
|
if (status == REG_VALID)
|
|
{
|
|
if (register_size (gdbarch, S390_PSWA_REGNUM) == 4)
|
|
val &= 0x7fffffff;
|
|
store_unsigned_integer (buf, regsize, byte_order, val);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
if (regnum == tdep->cc_regnum)
|
|
{
|
|
enum register_status status;
|
|
|
|
status = regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val);
|
|
if (status == REG_VALID)
|
|
{
|
|
if (register_size (gdbarch, S390_PSWA_REGNUM) == 4)
|
|
val = (val >> 12) & 3;
|
|
else
|
|
val = (val >> 44) & 3;
|
|
store_unsigned_integer (buf, regsize, byte_order, val);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
if (regnum_is_gpr_full (tdep, regnum))
|
|
{
|
|
enum register_status status;
|
|
ULONGEST val_upper;
|
|
|
|
regnum -= tdep->gpr_full_regnum;
|
|
|
|
status = regcache_raw_read_unsigned (regcache, S390_R0_REGNUM + regnum, &val);
|
|
if (status == REG_VALID)
|
|
status = regcache_raw_read_unsigned (regcache, S390_R0_UPPER_REGNUM + regnum,
|
|
&val_upper);
|
|
if (status == REG_VALID)
|
|
{
|
|
val |= val_upper << 32;
|
|
store_unsigned_integer (buf, regsize, byte_order, val);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
internal_error (__FILE__, __LINE__, _("invalid regnum"));
|
|
}
|
|
|
|
static void
|
|
s390_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
|
|
int regnum, const gdb_byte *buf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int regsize = register_size (gdbarch, regnum);
|
|
ULONGEST val, psw;
|
|
|
|
if (regnum == tdep->pc_regnum)
|
|
{
|
|
val = extract_unsigned_integer (buf, regsize, byte_order);
|
|
if (register_size (gdbarch, S390_PSWA_REGNUM) == 4)
|
|
{
|
|
regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &psw);
|
|
val = (psw & 0x80000000) | (val & 0x7fffffff);
|
|
}
|
|
regcache_raw_write_unsigned (regcache, S390_PSWA_REGNUM, val);
|
|
return;
|
|
}
|
|
|
|
if (regnum == tdep->cc_regnum)
|
|
{
|
|
val = extract_unsigned_integer (buf, regsize, byte_order);
|
|
regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw);
|
|
if (register_size (gdbarch, S390_PSWA_REGNUM) == 4)
|
|
val = (psw & ~((ULONGEST)3 << 12)) | ((val & 3) << 12);
|
|
else
|
|
val = (psw & ~((ULONGEST)3 << 44)) | ((val & 3) << 44);
|
|
regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, val);
|
|
return;
|
|
}
|
|
|
|
if (regnum_is_gpr_full (tdep, regnum))
|
|
{
|
|
regnum -= tdep->gpr_full_regnum;
|
|
val = extract_unsigned_integer (buf, regsize, byte_order);
|
|
regcache_raw_write_unsigned (regcache, S390_R0_REGNUM + regnum,
|
|
val & 0xffffffff);
|
|
regcache_raw_write_unsigned (regcache, S390_R0_UPPER_REGNUM + regnum,
|
|
val >> 32);
|
|
return;
|
|
}
|
|
|
|
internal_error (__FILE__, __LINE__, _("invalid regnum"));
|
|
}
|
|
|
|
/* 'float' values are stored in the upper half of floating-point
|
|
registers, even though we are otherwise a big-endian platform. */
|
|
|
|
static struct value *
|
|
s390_value_from_register (struct gdbarch *gdbarch, struct type *type,
|
|
int regnum, struct frame_id frame_id)
|
|
{
|
|
struct value *value = default_value_from_register (gdbarch, type,
|
|
regnum, frame_id);
|
|
check_typedef (type);
|
|
|
|
if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM
|
|
&& TYPE_LENGTH (type) < 8)
|
|
set_value_offset (value, 0);
|
|
|
|
return value;
|
|
}
|
|
|
|
/* Register groups. */
|
|
|
|
static int
|
|
s390_pseudo_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
|
|
struct reggroup *group)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
/* We usually save/restore the whole PSW, which includes PC and CC.
|
|
However, some older gdbservers may not support saving/restoring
|
|
the whole PSW yet, and will return an XML register description
|
|
excluding those from the save/restore register groups. In those
|
|
cases, we still need to explicitly save/restore PC and CC in order
|
|
to push or pop frames. Since this doesn't hurt anything if we
|
|
already save/restore the whole PSW (it's just redundant), we add
|
|
PC and CC at this point unconditionally. */
|
|
if (group == save_reggroup || group == restore_reggroup)
|
|
return regnum == tdep->pc_regnum || regnum == tdep->cc_regnum;
|
|
|
|
return default_register_reggroup_p (gdbarch, regnum, group);
|
|
}
|
|
|
|
|
|
/* Maps for register sets. */
|
|
|
|
const short s390_regmap_gregset[] =
|
|
{
|
|
0x00, S390_PSWM_REGNUM,
|
|
0x04, S390_PSWA_REGNUM,
|
|
0x08, S390_R0_REGNUM,
|
|
0x0c, S390_R1_REGNUM,
|
|
0x10, S390_R2_REGNUM,
|
|
0x14, S390_R3_REGNUM,
|
|
0x18, S390_R4_REGNUM,
|
|
0x1c, S390_R5_REGNUM,
|
|
0x20, S390_R6_REGNUM,
|
|
0x24, S390_R7_REGNUM,
|
|
0x28, S390_R8_REGNUM,
|
|
0x2c, S390_R9_REGNUM,
|
|
0x30, S390_R10_REGNUM,
|
|
0x34, S390_R11_REGNUM,
|
|
0x38, S390_R12_REGNUM,
|
|
0x3c, S390_R13_REGNUM,
|
|
0x40, S390_R14_REGNUM,
|
|
0x44, S390_R15_REGNUM,
|
|
0x48, S390_A0_REGNUM,
|
|
0x4c, S390_A1_REGNUM,
|
|
0x50, S390_A2_REGNUM,
|
|
0x54, S390_A3_REGNUM,
|
|
0x58, S390_A4_REGNUM,
|
|
0x5c, S390_A5_REGNUM,
|
|
0x60, S390_A6_REGNUM,
|
|
0x64, S390_A7_REGNUM,
|
|
0x68, S390_A8_REGNUM,
|
|
0x6c, S390_A9_REGNUM,
|
|
0x70, S390_A10_REGNUM,
|
|
0x74, S390_A11_REGNUM,
|
|
0x78, S390_A12_REGNUM,
|
|
0x7c, S390_A13_REGNUM,
|
|
0x80, S390_A14_REGNUM,
|
|
0x84, S390_A15_REGNUM,
|
|
0x88, S390_ORIG_R2_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390x_regmap_gregset[] =
|
|
{
|
|
0x00, S390_PSWM_REGNUM,
|
|
0x08, S390_PSWA_REGNUM,
|
|
0x10, S390_R0_REGNUM,
|
|
0x18, S390_R1_REGNUM,
|
|
0x20, S390_R2_REGNUM,
|
|
0x28, S390_R3_REGNUM,
|
|
0x30, S390_R4_REGNUM,
|
|
0x38, S390_R5_REGNUM,
|
|
0x40, S390_R6_REGNUM,
|
|
0x48, S390_R7_REGNUM,
|
|
0x50, S390_R8_REGNUM,
|
|
0x58, S390_R9_REGNUM,
|
|
0x60, S390_R10_REGNUM,
|
|
0x68, S390_R11_REGNUM,
|
|
0x70, S390_R12_REGNUM,
|
|
0x78, S390_R13_REGNUM,
|
|
0x80, S390_R14_REGNUM,
|
|
0x88, S390_R15_REGNUM,
|
|
0x90, S390_A0_REGNUM,
|
|
0x94, S390_A1_REGNUM,
|
|
0x98, S390_A2_REGNUM,
|
|
0x9c, S390_A3_REGNUM,
|
|
0xa0, S390_A4_REGNUM,
|
|
0xa4, S390_A5_REGNUM,
|
|
0xa8, S390_A6_REGNUM,
|
|
0xac, S390_A7_REGNUM,
|
|
0xb0, S390_A8_REGNUM,
|
|
0xb4, S390_A9_REGNUM,
|
|
0xb8, S390_A10_REGNUM,
|
|
0xbc, S390_A11_REGNUM,
|
|
0xc0, S390_A12_REGNUM,
|
|
0xc4, S390_A13_REGNUM,
|
|
0xc8, S390_A14_REGNUM,
|
|
0xcc, S390_A15_REGNUM,
|
|
0x10, S390_R0_UPPER_REGNUM,
|
|
0x18, S390_R1_UPPER_REGNUM,
|
|
0x20, S390_R2_UPPER_REGNUM,
|
|
0x28, S390_R3_UPPER_REGNUM,
|
|
0x30, S390_R4_UPPER_REGNUM,
|
|
0x38, S390_R5_UPPER_REGNUM,
|
|
0x40, S390_R6_UPPER_REGNUM,
|
|
0x48, S390_R7_UPPER_REGNUM,
|
|
0x50, S390_R8_UPPER_REGNUM,
|
|
0x58, S390_R9_UPPER_REGNUM,
|
|
0x60, S390_R10_UPPER_REGNUM,
|
|
0x68, S390_R11_UPPER_REGNUM,
|
|
0x70, S390_R12_UPPER_REGNUM,
|
|
0x78, S390_R13_UPPER_REGNUM,
|
|
0x80, S390_R14_UPPER_REGNUM,
|
|
0x88, S390_R15_UPPER_REGNUM,
|
|
0xd0, S390_ORIG_R2_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390_regmap_fpregset[] =
|
|
{
|
|
0x00, S390_FPC_REGNUM,
|
|
0x08, S390_F0_REGNUM,
|
|
0x10, S390_F1_REGNUM,
|
|
0x18, S390_F2_REGNUM,
|
|
0x20, S390_F3_REGNUM,
|
|
0x28, S390_F4_REGNUM,
|
|
0x30, S390_F5_REGNUM,
|
|
0x38, S390_F6_REGNUM,
|
|
0x40, S390_F7_REGNUM,
|
|
0x48, S390_F8_REGNUM,
|
|
0x50, S390_F9_REGNUM,
|
|
0x58, S390_F10_REGNUM,
|
|
0x60, S390_F11_REGNUM,
|
|
0x68, S390_F12_REGNUM,
|
|
0x70, S390_F13_REGNUM,
|
|
0x78, S390_F14_REGNUM,
|
|
0x80, S390_F15_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390_regmap_upper[] =
|
|
{
|
|
0x00, S390_R0_UPPER_REGNUM,
|
|
0x04, S390_R1_UPPER_REGNUM,
|
|
0x08, S390_R2_UPPER_REGNUM,
|
|
0x0c, S390_R3_UPPER_REGNUM,
|
|
0x10, S390_R4_UPPER_REGNUM,
|
|
0x14, S390_R5_UPPER_REGNUM,
|
|
0x18, S390_R6_UPPER_REGNUM,
|
|
0x1c, S390_R7_UPPER_REGNUM,
|
|
0x20, S390_R8_UPPER_REGNUM,
|
|
0x24, S390_R9_UPPER_REGNUM,
|
|
0x28, S390_R10_UPPER_REGNUM,
|
|
0x2c, S390_R11_UPPER_REGNUM,
|
|
0x30, S390_R12_UPPER_REGNUM,
|
|
0x34, S390_R13_UPPER_REGNUM,
|
|
0x38, S390_R14_UPPER_REGNUM,
|
|
0x3c, S390_R15_UPPER_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390_regmap_last_break[] =
|
|
{
|
|
0x04, S390_LAST_BREAK_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390x_regmap_last_break[] =
|
|
{
|
|
0x00, S390_LAST_BREAK_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390_regmap_system_call[] =
|
|
{
|
|
0x00, S390_SYSTEM_CALL_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
const short s390_regmap_tdb[] =
|
|
{
|
|
0x00, S390_TDB_DWORD0_REGNUM,
|
|
0x08, S390_TDB_ABORT_CODE_REGNUM,
|
|
0x10, S390_TDB_CONFLICT_TOKEN_REGNUM,
|
|
0x18, S390_TDB_ATIA_REGNUM,
|
|
0x80, S390_TDB_R0_REGNUM,
|
|
0x88, S390_TDB_R1_REGNUM,
|
|
0x90, S390_TDB_R2_REGNUM,
|
|
0x98, S390_TDB_R3_REGNUM,
|
|
0xa0, S390_TDB_R4_REGNUM,
|
|
0xa8, S390_TDB_R5_REGNUM,
|
|
0xb0, S390_TDB_R6_REGNUM,
|
|
0xb8, S390_TDB_R7_REGNUM,
|
|
0xc0, S390_TDB_R8_REGNUM,
|
|
0xc8, S390_TDB_R9_REGNUM,
|
|
0xd0, S390_TDB_R10_REGNUM,
|
|
0xd8, S390_TDB_R11_REGNUM,
|
|
0xe0, S390_TDB_R12_REGNUM,
|
|
0xe8, S390_TDB_R13_REGNUM,
|
|
0xf0, S390_TDB_R14_REGNUM,
|
|
0xf8, S390_TDB_R15_REGNUM,
|
|
-1, -1
|
|
};
|
|
|
|
|
|
/* Supply register REGNUM from the register set REGSET to register cache
|
|
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
|
|
static void
|
|
s390_supply_regset (const struct regset *regset, struct regcache *regcache,
|
|
int regnum, const void *regs, size_t len)
|
|
{
|
|
const short *map;
|
|
for (map = regset->descr; map[0] >= 0; map += 2)
|
|
if (regnum == -1 || regnum == map[1])
|
|
regcache_raw_supply (regcache, map[1],
|
|
regs ? (const char *)regs + map[0] : NULL);
|
|
}
|
|
|
|
/* Supply the TDB regset. Like s390_supply_regset, but invalidate the
|
|
TDB registers unless the TDB format field is valid. */
|
|
|
|
static void
|
|
s390_supply_tdb_regset (const struct regset *regset, struct regcache *regcache,
|
|
int regnum, const void *regs, size_t len)
|
|
{
|
|
ULONGEST tdw;
|
|
enum register_status ret;
|
|
int i;
|
|
|
|
s390_supply_regset (regset, regcache, regnum, regs, len);
|
|
ret = regcache_cooked_read_unsigned (regcache, S390_TDB_DWORD0_REGNUM, &tdw);
|
|
if (ret != REG_VALID || (tdw >> 56) != 1)
|
|
s390_supply_regset (regset, regcache, regnum, NULL, len);
|
|
}
|
|
|
|
/* Collect register REGNUM from the register cache REGCACHE and store
|
|
it in the buffer specified by REGS and LEN as described by the
|
|
general-purpose register set REGSET. If REGNUM is -1, do this for
|
|
all registers in REGSET. */
|
|
static void
|
|
s390_collect_regset (const struct regset *regset,
|
|
const struct regcache *regcache,
|
|
int regnum, void *regs, size_t len)
|
|
{
|
|
const short *map;
|
|
for (map = regset->descr; map[0] >= 0; map += 2)
|
|
if (regnum == -1 || regnum == map[1])
|
|
regcache_raw_collect (regcache, map[1], (char *)regs + map[0]);
|
|
}
|
|
|
|
static const struct regset s390_gregset = {
|
|
s390_regmap_gregset,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390x_gregset = {
|
|
s390x_regmap_gregset,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390_fpregset = {
|
|
s390_regmap_fpregset,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390_upper_regset = {
|
|
s390_regmap_upper,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390_last_break_regset = {
|
|
s390_regmap_last_break,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390x_last_break_regset = {
|
|
s390x_regmap_last_break,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390_system_call_regset = {
|
|
s390_regmap_system_call,
|
|
s390_supply_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static const struct regset s390_tdb_regset = {
|
|
s390_regmap_tdb,
|
|
s390_supply_tdb_regset,
|
|
s390_collect_regset
|
|
};
|
|
|
|
static struct core_regset_section s390_linux32_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390_linux32v1_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-last-break", 8, "s390 last-break address" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390_linux32v2_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-last-break", 8, "s390 last-break address" },
|
|
{ ".reg-s390-system-call", 4, "s390 system-call" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390_linux64_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-high-gprs", 16*4, "s390 GPR upper halves" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390_linux64v1_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-high-gprs", 16*4, "s390 GPR upper halves" },
|
|
{ ".reg-s390-last-break", 8, "s930 last-break address" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390_linux64v2_regset_sections[] =
|
|
{
|
|
{ ".reg", s390_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-high-gprs", 16*4, "s390 GPR upper halves" },
|
|
{ ".reg-s390-last-break", 8, "s930 last-break address" },
|
|
{ ".reg-s390-system-call", 4, "s390 system-call" },
|
|
{ ".reg-s390-tdb", s390_sizeof_tdbregset, "s390 TDB" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390x_linux64_regset_sections[] =
|
|
{
|
|
{ ".reg", s390x_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390x_linux64v1_regset_sections[] =
|
|
{
|
|
{ ".reg", s390x_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-last-break", 8, "s930 last-break address" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
static struct core_regset_section s390x_linux64v2_regset_sections[] =
|
|
{
|
|
{ ".reg", s390x_sizeof_gregset, "general-purpose" },
|
|
{ ".reg2", s390_sizeof_fpregset, "floating-point" },
|
|
{ ".reg-s390-last-break", 8, "s930 last-break address" },
|
|
{ ".reg-s390-system-call", 4, "s390 system-call" },
|
|
{ ".reg-s390-tdb", s390_sizeof_tdbregset, "s390 TDB" },
|
|
{ NULL, 0}
|
|
};
|
|
|
|
|
|
/* Return the appropriate register set for the core section identified
|
|
by SECT_NAME and SECT_SIZE. */
|
|
static const struct regset *
|
|
s390_regset_from_core_section (struct gdbarch *gdbarch,
|
|
const char *sect_name, size_t sect_size)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset)
|
|
return tdep->gregset;
|
|
|
|
if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset)
|
|
return tdep->fpregset;
|
|
|
|
if (strcmp (sect_name, ".reg-s390-high-gprs") == 0 && sect_size >= 16*4)
|
|
return &s390_upper_regset;
|
|
|
|
if (strcmp (sect_name, ".reg-s390-last-break") == 0 && sect_size >= 8)
|
|
return (gdbarch_ptr_bit (gdbarch) == 32
|
|
? &s390_last_break_regset : &s390x_last_break_regset);
|
|
|
|
if (strcmp (sect_name, ".reg-s390-system-call") == 0 && sect_size >= 4)
|
|
return &s390_system_call_regset;
|
|
|
|
if (strcmp (sect_name, ".reg-s390-tdb") == 0 && sect_size >= 256)
|
|
return &s390_tdb_regset;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static const struct target_desc *
|
|
s390_core_read_description (struct gdbarch *gdbarch,
|
|
struct target_ops *target, bfd *abfd)
|
|
{
|
|
asection *high_gprs = bfd_get_section_by_name (abfd, ".reg-s390-high-gprs");
|
|
asection *v1 = bfd_get_section_by_name (abfd, ".reg-s390-last-break");
|
|
asection *v2 = bfd_get_section_by_name (abfd, ".reg-s390-system-call");
|
|
asection *section = bfd_get_section_by_name (abfd, ".reg");
|
|
CORE_ADDR hwcap = 0;
|
|
|
|
target_auxv_search (target, AT_HWCAP, &hwcap);
|
|
if (!section)
|
|
return NULL;
|
|
|
|
switch (bfd_section_size (abfd, section))
|
|
{
|
|
case s390_sizeof_gregset:
|
|
if (high_gprs)
|
|
return ((hwcap & HWCAP_S390_TE) ? tdesc_s390_te_linux64 :
|
|
v2? tdesc_s390_linux64v2 :
|
|
v1? tdesc_s390_linux64v1 : tdesc_s390_linux64);
|
|
else
|
|
return (v2? tdesc_s390_linux32v2 :
|
|
v1? tdesc_s390_linux32v1 : tdesc_s390_linux32);
|
|
|
|
case s390x_sizeof_gregset:
|
|
return ((hwcap & HWCAP_S390_TE) ? tdesc_s390x_te_linux64 :
|
|
v2? tdesc_s390x_linux64v2 :
|
|
v1? tdesc_s390x_linux64v1 : tdesc_s390x_linux64);
|
|
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/* Decoding S/390 instructions. */
|
|
|
|
/* Named opcode values for the S/390 instructions we recognize. Some
|
|
instructions have their opcode split across two fields; those are the
|
|
op1_* and op2_* enums. */
|
|
enum
|
|
{
|
|
op1_lhi = 0xa7, op2_lhi = 0x08,
|
|
op1_lghi = 0xa7, op2_lghi = 0x09,
|
|
op1_lgfi = 0xc0, op2_lgfi = 0x01,
|
|
op_lr = 0x18,
|
|
op_lgr = 0xb904,
|
|
op_l = 0x58,
|
|
op1_ly = 0xe3, op2_ly = 0x58,
|
|
op1_lg = 0xe3, op2_lg = 0x04,
|
|
op_lm = 0x98,
|
|
op1_lmy = 0xeb, op2_lmy = 0x98,
|
|
op1_lmg = 0xeb, op2_lmg = 0x04,
|
|
op_st = 0x50,
|
|
op1_sty = 0xe3, op2_sty = 0x50,
|
|
op1_stg = 0xe3, op2_stg = 0x24,
|
|
op_std = 0x60,
|
|
op_stm = 0x90,
|
|
op1_stmy = 0xeb, op2_stmy = 0x90,
|
|
op1_stmg = 0xeb, op2_stmg = 0x24,
|
|
op1_aghi = 0xa7, op2_aghi = 0x0b,
|
|
op1_ahi = 0xa7, op2_ahi = 0x0a,
|
|
op1_agfi = 0xc2, op2_agfi = 0x08,
|
|
op1_afi = 0xc2, op2_afi = 0x09,
|
|
op1_algfi= 0xc2, op2_algfi= 0x0a,
|
|
op1_alfi = 0xc2, op2_alfi = 0x0b,
|
|
op_ar = 0x1a,
|
|
op_agr = 0xb908,
|
|
op_a = 0x5a,
|
|
op1_ay = 0xe3, op2_ay = 0x5a,
|
|
op1_ag = 0xe3, op2_ag = 0x08,
|
|
op1_slgfi= 0xc2, op2_slgfi= 0x04,
|
|
op1_slfi = 0xc2, op2_slfi = 0x05,
|
|
op_sr = 0x1b,
|
|
op_sgr = 0xb909,
|
|
op_s = 0x5b,
|
|
op1_sy = 0xe3, op2_sy = 0x5b,
|
|
op1_sg = 0xe3, op2_sg = 0x09,
|
|
op_nr = 0x14,
|
|
op_ngr = 0xb980,
|
|
op_la = 0x41,
|
|
op1_lay = 0xe3, op2_lay = 0x71,
|
|
op1_larl = 0xc0, op2_larl = 0x00,
|
|
op_basr = 0x0d,
|
|
op_bas = 0x4d,
|
|
op_bcr = 0x07,
|
|
op_bc = 0x0d,
|
|
op_bctr = 0x06,
|
|
op_bctgr = 0xb946,
|
|
op_bct = 0x46,
|
|
op1_bctg = 0xe3, op2_bctg = 0x46,
|
|
op_bxh = 0x86,
|
|
op1_bxhg = 0xeb, op2_bxhg = 0x44,
|
|
op_bxle = 0x87,
|
|
op1_bxleg= 0xeb, op2_bxleg= 0x45,
|
|
op1_bras = 0xa7, op2_bras = 0x05,
|
|
op1_brasl= 0xc0, op2_brasl= 0x05,
|
|
op1_brc = 0xa7, op2_brc = 0x04,
|
|
op1_brcl = 0xc0, op2_brcl = 0x04,
|
|
op1_brct = 0xa7, op2_brct = 0x06,
|
|
op1_brctg= 0xa7, op2_brctg= 0x07,
|
|
op_brxh = 0x84,
|
|
op1_brxhg= 0xec, op2_brxhg= 0x44,
|
|
op_brxle = 0x85,
|
|
op1_brxlg= 0xec, op2_brxlg= 0x45,
|
|
op_svc = 0x0a,
|
|
};
|
|
|
|
|
|
/* Read a single instruction from address AT. */
|
|
|
|
#define S390_MAX_INSTR_SIZE 6
|
|
static int
|
|
s390_readinstruction (bfd_byte instr[], CORE_ADDR at)
|
|
{
|
|
static int s390_instrlen[] = { 2, 4, 4, 6 };
|
|
int instrlen;
|
|
|
|
if (target_read_memory (at, &instr[0], 2))
|
|
return -1;
|
|
instrlen = s390_instrlen[instr[0] >> 6];
|
|
if (instrlen > 2)
|
|
{
|
|
if (target_read_memory (at + 2, &instr[2], instrlen - 2))
|
|
return -1;
|
|
}
|
|
return instrlen;
|
|
}
|
|
|
|
|
|
/* The functions below are for recognizing and decoding S/390
|
|
instructions of various formats. Each of them checks whether INSN
|
|
is an instruction of the given format, with the specified opcodes.
|
|
If it is, it sets the remaining arguments to the values of the
|
|
instruction's fields, and returns a non-zero value; otherwise, it
|
|
returns zero.
|
|
|
|
These functions' arguments appear in the order they appear in the
|
|
instruction, not in the machine-language form. So, opcodes always
|
|
come first, even though they're sometimes scattered around the
|
|
instructions. And displacements appear before base and extension
|
|
registers, as they do in the assembly syntax, not at the end, as
|
|
they do in the machine language. */
|
|
static int
|
|
is_ri (bfd_byte *insn, int op1, int op2, unsigned int *r1, int *i2)
|
|
{
|
|
if (insn[0] == op1 && (insn[1] & 0xf) == op2)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
/* i2 is a 16-bit signed quantity. */
|
|
*i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_ril (bfd_byte *insn, int op1, int op2,
|
|
unsigned int *r1, int *i2)
|
|
{
|
|
if (insn[0] == op1 && (insn[1] & 0xf) == op2)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
/* i2 is a signed quantity. If the host 'int' is 32 bits long,
|
|
no sign extension is necessary, but we don't want to assume
|
|
that. */
|
|
*i2 = (((insn[2] << 24)
|
|
| (insn[3] << 16)
|
|
| (insn[4] << 8)
|
|
| (insn[5])) ^ 0x80000000) - 0x80000000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rr (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
|
|
{
|
|
if (insn[0] == op)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*r2 = insn[1] & 0xf;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rre (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
|
|
{
|
|
if (((insn[0] << 8) | insn[1]) == op)
|
|
{
|
|
/* Yes, insn[3]. insn[2] is unused in RRE format. */
|
|
*r1 = (insn[3] >> 4) & 0xf;
|
|
*r2 = insn[3] & 0xf;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rs (bfd_byte *insn, int op,
|
|
unsigned int *r1, unsigned int *r3, int *d2, unsigned int *b2)
|
|
{
|
|
if (insn[0] == op)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*r3 = insn[1] & 0xf;
|
|
*b2 = (insn[2] >> 4) & 0xf;
|
|
*d2 = ((insn[2] & 0xf) << 8) | insn[3];
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rsy (bfd_byte *insn, int op1, int op2,
|
|
unsigned int *r1, unsigned int *r3, int *d2, unsigned int *b2)
|
|
{
|
|
if (insn[0] == op1
|
|
&& insn[5] == op2)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*r3 = insn[1] & 0xf;
|
|
*b2 = (insn[2] >> 4) & 0xf;
|
|
/* The 'long displacement' is a 20-bit signed integer. */
|
|
*d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
|
|
^ 0x80000) - 0x80000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rsi (bfd_byte *insn, int op,
|
|
unsigned int *r1, unsigned int *r3, int *i2)
|
|
{
|
|
if (insn[0] == op)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*r3 = insn[1] & 0xf;
|
|
/* i2 is a 16-bit signed quantity. */
|
|
*i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rie (bfd_byte *insn, int op1, int op2,
|
|
unsigned int *r1, unsigned int *r3, int *i2)
|
|
{
|
|
if (insn[0] == op1
|
|
&& insn[5] == op2)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*r3 = insn[1] & 0xf;
|
|
/* i2 is a 16-bit signed quantity. */
|
|
*i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rx (bfd_byte *insn, int op,
|
|
unsigned int *r1, int *d2, unsigned int *x2, unsigned int *b2)
|
|
{
|
|
if (insn[0] == op)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*x2 = insn[1] & 0xf;
|
|
*b2 = (insn[2] >> 4) & 0xf;
|
|
*d2 = ((insn[2] & 0xf) << 8) | insn[3];
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
is_rxy (bfd_byte *insn, int op1, int op2,
|
|
unsigned int *r1, int *d2, unsigned int *x2, unsigned int *b2)
|
|
{
|
|
if (insn[0] == op1
|
|
&& insn[5] == op2)
|
|
{
|
|
*r1 = (insn[1] >> 4) & 0xf;
|
|
*x2 = insn[1] & 0xf;
|
|
*b2 = (insn[2] >> 4) & 0xf;
|
|
/* The 'long displacement' is a 20-bit signed integer. */
|
|
*d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
|
|
^ 0x80000) - 0x80000;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Prologue analysis. */
|
|
|
|
#define S390_NUM_GPRS 16
|
|
#define S390_NUM_FPRS 16
|
|
|
|
struct s390_prologue_data {
|
|
|
|
/* The stack. */
|
|
struct pv_area *stack;
|
|
|
|
/* The size and byte-order of a GPR or FPR. */
|
|
int gpr_size;
|
|
int fpr_size;
|
|
enum bfd_endian byte_order;
|
|
|
|
/* The general-purpose registers. */
|
|
pv_t gpr[S390_NUM_GPRS];
|
|
|
|
/* The floating-point registers. */
|
|
pv_t fpr[S390_NUM_FPRS];
|
|
|
|
/* The offset relative to the CFA where the incoming GPR N was saved
|
|
by the function prologue. 0 if not saved or unknown. */
|
|
int gpr_slot[S390_NUM_GPRS];
|
|
|
|
/* Likewise for FPRs. */
|
|
int fpr_slot[S390_NUM_FPRS];
|
|
|
|
/* Nonzero if the backchain was saved. This is assumed to be the
|
|
case when the incoming SP is saved at the current SP location. */
|
|
int back_chain_saved_p;
|
|
};
|
|
|
|
/* Return the effective address for an X-style instruction, like:
|
|
|
|
L R1, D2(X2, B2)
|
|
|
|
Here, X2 and B2 are registers, and D2 is a signed 20-bit
|
|
constant; the effective address is the sum of all three. If either
|
|
X2 or B2 are zero, then it doesn't contribute to the sum --- this
|
|
means that r0 can't be used as either X2 or B2. */
|
|
static pv_t
|
|
s390_addr (struct s390_prologue_data *data,
|
|
int d2, unsigned int x2, unsigned int b2)
|
|
{
|
|
pv_t result;
|
|
|
|
result = pv_constant (d2);
|
|
if (x2)
|
|
result = pv_add (result, data->gpr[x2]);
|
|
if (b2)
|
|
result = pv_add (result, data->gpr[b2]);
|
|
|
|
return result;
|
|
}
|
|
|
|
/* Do a SIZE-byte store of VALUE to D2(X2,B2). */
|
|
static void
|
|
s390_store (struct s390_prologue_data *data,
|
|
int d2, unsigned int x2, unsigned int b2, CORE_ADDR size,
|
|
pv_t value)
|
|
{
|
|
pv_t addr = s390_addr (data, d2, x2, b2);
|
|
pv_t offset;
|
|
|
|
/* Check whether we are storing the backchain. */
|
|
offset = pv_subtract (data->gpr[S390_SP_REGNUM - S390_R0_REGNUM], addr);
|
|
|
|
if (pv_is_constant (offset) && offset.k == 0)
|
|
if (size == data->gpr_size
|
|
&& pv_is_register_k (value, S390_SP_REGNUM, 0))
|
|
{
|
|
data->back_chain_saved_p = 1;
|
|
return;
|
|
}
|
|
|
|
|
|
/* Check whether we are storing a register into the stack. */
|
|
if (!pv_area_store_would_trash (data->stack, addr))
|
|
pv_area_store (data->stack, addr, size, value);
|
|
|
|
|
|
/* Note: If this is some store we cannot identify, you might think we
|
|
should forget our cached values, as any of those might have been hit.
|
|
|
|
However, we make the assumption that the register save areas are only
|
|
ever stored to once in any given function, and we do recognize these
|
|
stores. Thus every store we cannot recognize does not hit our data. */
|
|
}
|
|
|
|
/* Do a SIZE-byte load from D2(X2,B2). */
|
|
static pv_t
|
|
s390_load (struct s390_prologue_data *data,
|
|
int d2, unsigned int x2, unsigned int b2, CORE_ADDR size)
|
|
|
|
{
|
|
pv_t addr = s390_addr (data, d2, x2, b2);
|
|
|
|
/* If it's a load from an in-line constant pool, then we can
|
|
simulate that, under the assumption that the code isn't
|
|
going to change between the time the processor actually
|
|
executed it creating the current frame, and the time when
|
|
we're analyzing the code to unwind past that frame. */
|
|
if (pv_is_constant (addr))
|
|
{
|
|
struct target_section *secp;
|
|
secp = target_section_by_addr (¤t_target, addr.k);
|
|
if (secp != NULL
|
|
&& (bfd_get_section_flags (secp->the_bfd_section->owner,
|
|
secp->the_bfd_section)
|
|
& SEC_READONLY))
|
|
return pv_constant (read_memory_integer (addr.k, size,
|
|
data->byte_order));
|
|
}
|
|
|
|
/* Check whether we are accessing one of our save slots. */
|
|
return pv_area_fetch (data->stack, addr, size);
|
|
}
|
|
|
|
/* Function for finding saved registers in a 'struct pv_area'; we pass
|
|
this to pv_area_scan.
|
|
|
|
If VALUE is a saved register, ADDR says it was saved at a constant
|
|
offset from the frame base, and SIZE indicates that the whole
|
|
register was saved, record its offset in the reg_offset table in
|
|
PROLOGUE_UNTYPED. */
|
|
static void
|
|
s390_check_for_saved (void *data_untyped, pv_t addr,
|
|
CORE_ADDR size, pv_t value)
|
|
{
|
|
struct s390_prologue_data *data = data_untyped;
|
|
int i, offset;
|
|
|
|
if (!pv_is_register (addr, S390_SP_REGNUM))
|
|
return;
|
|
|
|
offset = 16 * data->gpr_size + 32 - addr.k;
|
|
|
|
/* If we are storing the original value of a register, we want to
|
|
record the CFA offset. If the same register is stored multiple
|
|
times, the stack slot with the highest address counts. */
|
|
|
|
for (i = 0; i < S390_NUM_GPRS; i++)
|
|
if (size == data->gpr_size
|
|
&& pv_is_register_k (value, S390_R0_REGNUM + i, 0))
|
|
if (data->gpr_slot[i] == 0
|
|
|| data->gpr_slot[i] > offset)
|
|
{
|
|
data->gpr_slot[i] = offset;
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < S390_NUM_FPRS; i++)
|
|
if (size == data->fpr_size
|
|
&& pv_is_register_k (value, S390_F0_REGNUM + i, 0))
|
|
if (data->fpr_slot[i] == 0
|
|
|| data->fpr_slot[i] > offset)
|
|
{
|
|
data->fpr_slot[i] = offset;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Analyze the prologue of the function starting at START_PC,
|
|
continuing at most until CURRENT_PC. Initialize DATA to
|
|
hold all information we find out about the state of the registers
|
|
and stack slots. Return the address of the instruction after
|
|
the last one that changed the SP, FP, or back chain; or zero
|
|
on error. */
|
|
static CORE_ADDR
|
|
s390_analyze_prologue (struct gdbarch *gdbarch,
|
|
CORE_ADDR start_pc,
|
|
CORE_ADDR current_pc,
|
|
struct s390_prologue_data *data)
|
|
{
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
|
|
/* Our return value:
|
|
The address of the instruction after the last one that changed
|
|
the SP, FP, or back chain; zero if we got an error trying to
|
|
read memory. */
|
|
CORE_ADDR result = start_pc;
|
|
|
|
/* The current PC for our abstract interpretation. */
|
|
CORE_ADDR pc;
|
|
|
|
/* The address of the next instruction after that. */
|
|
CORE_ADDR next_pc;
|
|
|
|
/* Set up everything's initial value. */
|
|
{
|
|
int i;
|
|
|
|
data->stack = make_pv_area (S390_SP_REGNUM, gdbarch_addr_bit (gdbarch));
|
|
|
|
/* For the purpose of prologue tracking, we consider the GPR size to
|
|
be equal to the ABI word size, even if it is actually larger
|
|
(i.e. when running a 32-bit binary under a 64-bit kernel). */
|
|
data->gpr_size = word_size;
|
|
data->fpr_size = 8;
|
|
data->byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
for (i = 0; i < S390_NUM_GPRS; i++)
|
|
data->gpr[i] = pv_register (S390_R0_REGNUM + i, 0);
|
|
|
|
for (i = 0; i < S390_NUM_FPRS; i++)
|
|
data->fpr[i] = pv_register (S390_F0_REGNUM + i, 0);
|
|
|
|
for (i = 0; i < S390_NUM_GPRS; i++)
|
|
data->gpr_slot[i] = 0;
|
|
|
|
for (i = 0; i < S390_NUM_FPRS; i++)
|
|
data->fpr_slot[i] = 0;
|
|
|
|
data->back_chain_saved_p = 0;
|
|
}
|
|
|
|
/* Start interpreting instructions, until we hit the frame's
|
|
current PC or the first branch instruction. */
|
|
for (pc = start_pc; pc > 0 && pc < current_pc; pc = next_pc)
|
|
{
|
|
bfd_byte insn[S390_MAX_INSTR_SIZE];
|
|
int insn_len = s390_readinstruction (insn, pc);
|
|
|
|
bfd_byte dummy[S390_MAX_INSTR_SIZE] = { 0 };
|
|
bfd_byte *insn32 = word_size == 4 ? insn : dummy;
|
|
bfd_byte *insn64 = word_size == 8 ? insn : dummy;
|
|
|
|
/* Fields for various kinds of instructions. */
|
|
unsigned int b2, r1, r2, x2, r3;
|
|
int i2, d2;
|
|
|
|
/* The values of SP and FP before this instruction,
|
|
for detecting instructions that change them. */
|
|
pv_t pre_insn_sp, pre_insn_fp;
|
|
/* Likewise for the flag whether the back chain was saved. */
|
|
int pre_insn_back_chain_saved_p;
|
|
|
|
/* If we got an error trying to read the instruction, report it. */
|
|
if (insn_len < 0)
|
|
{
|
|
result = 0;
|
|
break;
|
|
}
|
|
|
|
next_pc = pc + insn_len;
|
|
|
|
pre_insn_sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
|
|
pre_insn_fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
|
|
pre_insn_back_chain_saved_p = data->back_chain_saved_p;
|
|
|
|
|
|
/* LHI r1, i2 --- load halfword immediate. */
|
|
/* LGHI r1, i2 --- load halfword immediate (64-bit version). */
|
|
/* LGFI r1, i2 --- load fullword immediate. */
|
|
if (is_ri (insn32, op1_lhi, op2_lhi, &r1, &i2)
|
|
|| is_ri (insn64, op1_lghi, op2_lghi, &r1, &i2)
|
|
|| is_ril (insn, op1_lgfi, op2_lgfi, &r1, &i2))
|
|
data->gpr[r1] = pv_constant (i2);
|
|
|
|
/* LR r1, r2 --- load from register. */
|
|
/* LGR r1, r2 --- load from register (64-bit version). */
|
|
else if (is_rr (insn32, op_lr, &r1, &r2)
|
|
|| is_rre (insn64, op_lgr, &r1, &r2))
|
|
data->gpr[r1] = data->gpr[r2];
|
|
|
|
/* L r1, d2(x2, b2) --- load. */
|
|
/* LY r1, d2(x2, b2) --- load (long-displacement version). */
|
|
/* LG r1, d2(x2, b2) --- load (64-bit version). */
|
|
else if (is_rx (insn32, op_l, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn32, op1_ly, op2_ly, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn64, op1_lg, op2_lg, &r1, &d2, &x2, &b2))
|
|
data->gpr[r1] = s390_load (data, d2, x2, b2, data->gpr_size);
|
|
|
|
/* ST r1, d2(x2, b2) --- store. */
|
|
/* STY r1, d2(x2, b2) --- store (long-displacement version). */
|
|
/* STG r1, d2(x2, b2) --- store (64-bit version). */
|
|
else if (is_rx (insn32, op_st, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn32, op1_sty, op2_sty, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn64, op1_stg, op2_stg, &r1, &d2, &x2, &b2))
|
|
s390_store (data, d2, x2, b2, data->gpr_size, data->gpr[r1]);
|
|
|
|
/* STD r1, d2(x2,b2) --- store floating-point register. */
|
|
else if (is_rx (insn, op_std, &r1, &d2, &x2, &b2))
|
|
s390_store (data, d2, x2, b2, data->fpr_size, data->fpr[r1]);
|
|
|
|
/* STM r1, r3, d2(b2) --- store multiple. */
|
|
/* STMY r1, r3, d2(b2) --- store multiple (long-displacement
|
|
version). */
|
|
/* STMG r1, r3, d2(b2) --- store multiple (64-bit version). */
|
|
else if (is_rs (insn32, op_stm, &r1, &r3, &d2, &b2)
|
|
|| is_rsy (insn32, op1_stmy, op2_stmy, &r1, &r3, &d2, &b2)
|
|
|| is_rsy (insn64, op1_stmg, op2_stmg, &r1, &r3, &d2, &b2))
|
|
{
|
|
for (; r1 <= r3; r1++, d2 += data->gpr_size)
|
|
s390_store (data, d2, 0, b2, data->gpr_size, data->gpr[r1]);
|
|
}
|
|
|
|
/* AHI r1, i2 --- add halfword immediate. */
|
|
/* AGHI r1, i2 --- add halfword immediate (64-bit version). */
|
|
/* AFI r1, i2 --- add fullword immediate. */
|
|
/* AGFI r1, i2 --- add fullword immediate (64-bit version). */
|
|
else if (is_ri (insn32, op1_ahi, op2_ahi, &r1, &i2)
|
|
|| is_ri (insn64, op1_aghi, op2_aghi, &r1, &i2)
|
|
|| is_ril (insn32, op1_afi, op2_afi, &r1, &i2)
|
|
|| is_ril (insn64, op1_agfi, op2_agfi, &r1, &i2))
|
|
data->gpr[r1] = pv_add_constant (data->gpr[r1], i2);
|
|
|
|
/* ALFI r1, i2 --- add logical immediate. */
|
|
/* ALGFI r1, i2 --- add logical immediate (64-bit version). */
|
|
else if (is_ril (insn32, op1_alfi, op2_alfi, &r1, &i2)
|
|
|| is_ril (insn64, op1_algfi, op2_algfi, &r1, &i2))
|
|
data->gpr[r1] = pv_add_constant (data->gpr[r1],
|
|
(CORE_ADDR)i2 & 0xffffffff);
|
|
|
|
/* AR r1, r2 -- add register. */
|
|
/* AGR r1, r2 -- add register (64-bit version). */
|
|
else if (is_rr (insn32, op_ar, &r1, &r2)
|
|
|| is_rre (insn64, op_agr, &r1, &r2))
|
|
data->gpr[r1] = pv_add (data->gpr[r1], data->gpr[r2]);
|
|
|
|
/* A r1, d2(x2, b2) -- add. */
|
|
/* AY r1, d2(x2, b2) -- add (long-displacement version). */
|
|
/* AG r1, d2(x2, b2) -- add (64-bit version). */
|
|
else if (is_rx (insn32, op_a, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn32, op1_ay, op2_ay, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn64, op1_ag, op2_ag, &r1, &d2, &x2, &b2))
|
|
data->gpr[r1] = pv_add (data->gpr[r1],
|
|
s390_load (data, d2, x2, b2, data->gpr_size));
|
|
|
|
/* SLFI r1, i2 --- subtract logical immediate. */
|
|
/* SLGFI r1, i2 --- subtract logical immediate (64-bit version). */
|
|
else if (is_ril (insn32, op1_slfi, op2_slfi, &r1, &i2)
|
|
|| is_ril (insn64, op1_slgfi, op2_slgfi, &r1, &i2))
|
|
data->gpr[r1] = pv_add_constant (data->gpr[r1],
|
|
-((CORE_ADDR)i2 & 0xffffffff));
|
|
|
|
/* SR r1, r2 -- subtract register. */
|
|
/* SGR r1, r2 -- subtract register (64-bit version). */
|
|
else if (is_rr (insn32, op_sr, &r1, &r2)
|
|
|| is_rre (insn64, op_sgr, &r1, &r2))
|
|
data->gpr[r1] = pv_subtract (data->gpr[r1], data->gpr[r2]);
|
|
|
|
/* S r1, d2(x2, b2) -- subtract. */
|
|
/* SY r1, d2(x2, b2) -- subtract (long-displacement version). */
|
|
/* SG r1, d2(x2, b2) -- subtract (64-bit version). */
|
|
else if (is_rx (insn32, op_s, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn32, op1_sy, op2_sy, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn64, op1_sg, op2_sg, &r1, &d2, &x2, &b2))
|
|
data->gpr[r1] = pv_subtract (data->gpr[r1],
|
|
s390_load (data, d2, x2, b2, data->gpr_size));
|
|
|
|
/* LA r1, d2(x2, b2) --- load address. */
|
|
/* LAY r1, d2(x2, b2) --- load address (long-displacement version). */
|
|
else if (is_rx (insn, op_la, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn, op1_lay, op2_lay, &r1, &d2, &x2, &b2))
|
|
data->gpr[r1] = s390_addr (data, d2, x2, b2);
|
|
|
|
/* LARL r1, i2 --- load address relative long. */
|
|
else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2))
|
|
data->gpr[r1] = pv_constant (pc + i2 * 2);
|
|
|
|
/* BASR r1, 0 --- branch and save.
|
|
Since r2 is zero, this saves the PC in r1, but doesn't branch. */
|
|
else if (is_rr (insn, op_basr, &r1, &r2)
|
|
&& r2 == 0)
|
|
data->gpr[r1] = pv_constant (next_pc);
|
|
|
|
/* BRAS r1, i2 --- branch relative and save. */
|
|
else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2))
|
|
{
|
|
data->gpr[r1] = pv_constant (next_pc);
|
|
next_pc = pc + i2 * 2;
|
|
|
|
/* We'd better not interpret any backward branches. We'll
|
|
never terminate. */
|
|
if (next_pc <= pc)
|
|
break;
|
|
}
|
|
|
|
/* Terminate search when hitting any other branch instruction. */
|
|
else if (is_rr (insn, op_basr, &r1, &r2)
|
|
|| is_rx (insn, op_bas, &r1, &d2, &x2, &b2)
|
|
|| is_rr (insn, op_bcr, &r1, &r2)
|
|
|| is_rx (insn, op_bc, &r1, &d2, &x2, &b2)
|
|
|| is_ri (insn, op1_brc, op2_brc, &r1, &i2)
|
|
|| is_ril (insn, op1_brcl, op2_brcl, &r1, &i2)
|
|
|| is_ril (insn, op1_brasl, op2_brasl, &r2, &i2))
|
|
break;
|
|
|
|
else
|
|
{
|
|
/* An instruction we don't know how to simulate. The only
|
|
safe thing to do would be to set every value we're tracking
|
|
to 'unknown'. Instead, we'll be optimistic: we assume that
|
|
we *can* interpret every instruction that the compiler uses
|
|
to manipulate any of the data we're interested in here --
|
|
then we can just ignore anything else. */
|
|
}
|
|
|
|
/* Record the address after the last instruction that changed
|
|
the FP, SP, or backlink. Ignore instructions that changed
|
|
them back to their original values --- those are probably
|
|
restore instructions. (The back chain is never restored,
|
|
just popped.) */
|
|
{
|
|
pv_t sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
|
|
pv_t fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
|
|
|
|
if ((! pv_is_identical (pre_insn_sp, sp)
|
|
&& ! pv_is_register_k (sp, S390_SP_REGNUM, 0)
|
|
&& sp.kind != pvk_unknown)
|
|
|| (! pv_is_identical (pre_insn_fp, fp)
|
|
&& ! pv_is_register_k (fp, S390_FRAME_REGNUM, 0)
|
|
&& fp.kind != pvk_unknown)
|
|
|| pre_insn_back_chain_saved_p != data->back_chain_saved_p)
|
|
result = next_pc;
|
|
}
|
|
}
|
|
|
|
/* Record where all the registers were saved. */
|
|
pv_area_scan (data->stack, s390_check_for_saved, data);
|
|
|
|
free_pv_area (data->stack);
|
|
data->stack = NULL;
|
|
|
|
return result;
|
|
}
|
|
|
|
/* Advance PC across any function entry prologue instructions to reach
|
|
some "real" code. */
|
|
static CORE_ADDR
|
|
s390_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
struct s390_prologue_data data;
|
|
CORE_ADDR skip_pc;
|
|
skip_pc = s390_analyze_prologue (gdbarch, pc, (CORE_ADDR)-1, &data);
|
|
return skip_pc ? skip_pc : pc;
|
|
}
|
|
|
|
/* Return true if we are in the functin's epilogue, i.e. after the
|
|
instruction that destroyed the function's stack frame. */
|
|
static int
|
|
s390_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
|
|
/* In frameless functions, there's not frame to destroy and thus
|
|
we don't care about the epilogue.
|
|
|
|
In functions with frame, the epilogue sequence is a pair of
|
|
a LM-type instruction that restores (amongst others) the
|
|
return register %r14 and the stack pointer %r15, followed
|
|
by a branch 'br %r14' --or equivalent-- that effects the
|
|
actual return.
|
|
|
|
In that situation, this function needs to return 'true' in
|
|
exactly one case: when pc points to that branch instruction.
|
|
|
|
Thus we try to disassemble the one instructions immediately
|
|
preceding pc and check whether it is an LM-type instruction
|
|
modifying the stack pointer.
|
|
|
|
Note that disassembling backwards is not reliable, so there
|
|
is a slight chance of false positives here ... */
|
|
|
|
bfd_byte insn[6];
|
|
unsigned int r1, r3, b2;
|
|
int d2;
|
|
|
|
if (word_size == 4
|
|
&& !target_read_memory (pc - 4, insn, 4)
|
|
&& is_rs (insn, op_lm, &r1, &r3, &d2, &b2)
|
|
&& r3 == S390_SP_REGNUM - S390_R0_REGNUM)
|
|
return 1;
|
|
|
|
if (word_size == 4
|
|
&& !target_read_memory (pc - 6, insn, 6)
|
|
&& is_rsy (insn, op1_lmy, op2_lmy, &r1, &r3, &d2, &b2)
|
|
&& r3 == S390_SP_REGNUM - S390_R0_REGNUM)
|
|
return 1;
|
|
|
|
if (word_size == 8
|
|
&& !target_read_memory (pc - 6, insn, 6)
|
|
&& is_rsy (insn, op1_lmg, op2_lmg, &r1, &r3, &d2, &b2)
|
|
&& r3 == S390_SP_REGNUM - S390_R0_REGNUM)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Displaced stepping. */
|
|
|
|
/* Fix up the state of registers and memory after having single-stepped
|
|
a displaced instruction. */
|
|
static void
|
|
s390_displaced_step_fixup (struct gdbarch *gdbarch,
|
|
struct displaced_step_closure *closure,
|
|
CORE_ADDR from, CORE_ADDR to,
|
|
struct regcache *regs)
|
|
{
|
|
/* Since we use simple_displaced_step_copy_insn, our closure is a
|
|
copy of the instruction. */
|
|
gdb_byte *insn = (gdb_byte *) closure;
|
|
static int s390_instrlen[] = { 2, 4, 4, 6 };
|
|
int insnlen = s390_instrlen[insn[0] >> 6];
|
|
|
|
/* Fields for various kinds of instructions. */
|
|
unsigned int b2, r1, r2, x2, r3;
|
|
int i2, d2;
|
|
|
|
/* Get current PC and addressing mode bit. */
|
|
CORE_ADDR pc = regcache_read_pc (regs);
|
|
ULONGEST amode = 0;
|
|
|
|
if (register_size (gdbarch, S390_PSWA_REGNUM) == 4)
|
|
{
|
|
regcache_cooked_read_unsigned (regs, S390_PSWA_REGNUM, &amode);
|
|
amode &= 0x80000000;
|
|
}
|
|
|
|
if (debug_displaced)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"displaced: (s390) fixup (%s, %s) pc %s len %d amode 0x%x\n",
|
|
paddress (gdbarch, from), paddress (gdbarch, to),
|
|
paddress (gdbarch, pc), insnlen, (int) amode);
|
|
|
|
/* Handle absolute branch and save instructions. */
|
|
if (is_rr (insn, op_basr, &r1, &r2)
|
|
|| is_rx (insn, op_bas, &r1, &d2, &x2, &b2))
|
|
{
|
|
/* Recompute saved return address in R1. */
|
|
regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1,
|
|
amode | (from + insnlen));
|
|
}
|
|
|
|
/* Handle absolute branch instructions. */
|
|
else if (is_rr (insn, op_bcr, &r1, &r2)
|
|
|| is_rx (insn, op_bc, &r1, &d2, &x2, &b2)
|
|
|| is_rr (insn, op_bctr, &r1, &r2)
|
|
|| is_rre (insn, op_bctgr, &r1, &r2)
|
|
|| is_rx (insn, op_bct, &r1, &d2, &x2, &b2)
|
|
|| is_rxy (insn, op1_bctg, op2_brctg, &r1, &d2, &x2, &b2)
|
|
|| is_rs (insn, op_bxh, &r1, &r3, &d2, &b2)
|
|
|| is_rsy (insn, op1_bxhg, op2_bxhg, &r1, &r3, &d2, &b2)
|
|
|| is_rs (insn, op_bxle, &r1, &r3, &d2, &b2)
|
|
|| is_rsy (insn, op1_bxleg, op2_bxleg, &r1, &r3, &d2, &b2))
|
|
{
|
|
/* Update PC iff branch was *not* taken. */
|
|
if (pc == to + insnlen)
|
|
regcache_write_pc (regs, from + insnlen);
|
|
}
|
|
|
|
/* Handle PC-relative branch and save instructions. */
|
|
else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2)
|
|
|| is_ril (insn, op1_brasl, op2_brasl, &r1, &i2))
|
|
{
|
|
/* Update PC. */
|
|
regcache_write_pc (regs, pc - to + from);
|
|
/* Recompute saved return address in R1. */
|
|
regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1,
|
|
amode | (from + insnlen));
|
|
}
|
|
|
|
/* Handle PC-relative branch instructions. */
|
|
else if (is_ri (insn, op1_brc, op2_brc, &r1, &i2)
|
|
|| is_ril (insn, op1_brcl, op2_brcl, &r1, &i2)
|
|
|| is_ri (insn, op1_brct, op2_brct, &r1, &i2)
|
|
|| is_ri (insn, op1_brctg, op2_brctg, &r1, &i2)
|
|
|| is_rsi (insn, op_brxh, &r1, &r3, &i2)
|
|
|| is_rie (insn, op1_brxhg, op2_brxhg, &r1, &r3, &i2)
|
|
|| is_rsi (insn, op_brxle, &r1, &r3, &i2)
|
|
|| is_rie (insn, op1_brxlg, op2_brxlg, &r1, &r3, &i2))
|
|
{
|
|
/* Update PC. */
|
|
regcache_write_pc (regs, pc - to + from);
|
|
}
|
|
|
|
/* Handle LOAD ADDRESS RELATIVE LONG. */
|
|
else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2))
|
|
{
|
|
/* Update PC. */
|
|
regcache_write_pc (regs, from + insnlen);
|
|
/* Recompute output address in R1. */
|
|
regcache_cooked_write_unsigned (regs, S390_R0_REGNUM + r1,
|
|
amode | (from + i2 * 2));
|
|
}
|
|
|
|
/* If we executed a breakpoint instruction, point PC right back at it. */
|
|
else if (insn[0] == 0x0 && insn[1] == 0x1)
|
|
regcache_write_pc (regs, from);
|
|
|
|
/* For any other insn, PC points right after the original instruction. */
|
|
else
|
|
regcache_write_pc (regs, from + insnlen);
|
|
|
|
if (debug_displaced)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"displaced: (s390) pc is now %s\n",
|
|
paddress (gdbarch, regcache_read_pc (regs)));
|
|
}
|
|
|
|
|
|
/* Helper routine to unwind pseudo registers. */
|
|
|
|
static struct value *
|
|
s390_unwind_pseudo_register (struct frame_info *this_frame, int regnum)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
struct type *type = register_type (gdbarch, regnum);
|
|
|
|
/* Unwind PC via PSW address. */
|
|
if (regnum == tdep->pc_regnum)
|
|
{
|
|
struct value *val;
|
|
|
|
val = frame_unwind_register_value (this_frame, S390_PSWA_REGNUM);
|
|
if (!value_optimized_out (val))
|
|
{
|
|
LONGEST pswa = value_as_long (val);
|
|
|
|
if (TYPE_LENGTH (type) == 4)
|
|
return value_from_pointer (type, pswa & 0x7fffffff);
|
|
else
|
|
return value_from_pointer (type, pswa);
|
|
}
|
|
}
|
|
|
|
/* Unwind CC via PSW mask. */
|
|
if (regnum == tdep->cc_regnum)
|
|
{
|
|
struct value *val;
|
|
|
|
val = frame_unwind_register_value (this_frame, S390_PSWM_REGNUM);
|
|
if (!value_optimized_out (val))
|
|
{
|
|
LONGEST pswm = value_as_long (val);
|
|
|
|
if (TYPE_LENGTH (type) == 4)
|
|
return value_from_longest (type, (pswm >> 12) & 3);
|
|
else
|
|
return value_from_longest (type, (pswm >> 44) & 3);
|
|
}
|
|
}
|
|
|
|
/* Unwind full GPRs to show at least the lower halves (as the
|
|
upper halves are undefined). */
|
|
if (regnum_is_gpr_full (tdep, regnum))
|
|
{
|
|
int reg = regnum - tdep->gpr_full_regnum;
|
|
struct value *val;
|
|
|
|
val = frame_unwind_register_value (this_frame, S390_R0_REGNUM + reg);
|
|
if (!value_optimized_out (val))
|
|
return value_cast (type, val);
|
|
}
|
|
|
|
return allocate_optimized_out_value (type);
|
|
}
|
|
|
|
static struct value *
|
|
s390_trad_frame_prev_register (struct frame_info *this_frame,
|
|
struct trad_frame_saved_reg saved_regs[],
|
|
int regnum)
|
|
{
|
|
if (regnum < S390_NUM_REGS)
|
|
return trad_frame_get_prev_register (this_frame, saved_regs, regnum);
|
|
else
|
|
return s390_unwind_pseudo_register (this_frame, regnum);
|
|
}
|
|
|
|
|
|
/* Normal stack frames. */
|
|
|
|
struct s390_unwind_cache {
|
|
|
|
CORE_ADDR func;
|
|
CORE_ADDR frame_base;
|
|
CORE_ADDR local_base;
|
|
|
|
struct trad_frame_saved_reg *saved_regs;
|
|
};
|
|
|
|
static int
|
|
s390_prologue_frame_unwind_cache (struct frame_info *this_frame,
|
|
struct s390_unwind_cache *info)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
struct s390_prologue_data data;
|
|
pv_t *fp = &data.gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
|
|
pv_t *sp = &data.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
|
|
int i;
|
|
CORE_ADDR cfa;
|
|
CORE_ADDR func;
|
|
CORE_ADDR result;
|
|
ULONGEST reg;
|
|
CORE_ADDR prev_sp;
|
|
int frame_pointer;
|
|
int size;
|
|
struct frame_info *next_frame;
|
|
|
|
/* Try to find the function start address. If we can't find it, we don't
|
|
bother searching for it -- with modern compilers this would be mostly
|
|
pointless anyway. Trust that we'll either have valid DWARF-2 CFI data
|
|
or else a valid backchain ... */
|
|
func = get_frame_func (this_frame);
|
|
if (!func)
|
|
return 0;
|
|
|
|
/* Try to analyze the prologue. */
|
|
result = s390_analyze_prologue (gdbarch, func,
|
|
get_frame_pc (this_frame), &data);
|
|
if (!result)
|
|
return 0;
|
|
|
|
/* If this was successful, we should have found the instruction that
|
|
sets the stack pointer register to the previous value of the stack
|
|
pointer minus the frame size. */
|
|
if (!pv_is_register (*sp, S390_SP_REGNUM))
|
|
return 0;
|
|
|
|
/* A frame size of zero at this point can mean either a real
|
|
frameless function, or else a failure to find the prologue.
|
|
Perform some sanity checks to verify we really have a
|
|
frameless function. */
|
|
if (sp->k == 0)
|
|
{
|
|
/* If the next frame is a NORMAL_FRAME, this frame *cannot* have frame
|
|
size zero. This is only possible if the next frame is a sentinel
|
|
frame, a dummy frame, or a signal trampoline frame. */
|
|
/* FIXME: cagney/2004-05-01: This sanity check shouldn't be
|
|
needed, instead the code should simpliy rely on its
|
|
analysis. */
|
|
next_frame = get_next_frame (this_frame);
|
|
while (next_frame && get_frame_type (next_frame) == INLINE_FRAME)
|
|
next_frame = get_next_frame (next_frame);
|
|
if (next_frame
|
|
&& get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME)
|
|
return 0;
|
|
|
|
/* If we really have a frameless function, %r14 must be valid
|
|
-- in particular, it must point to a different function. */
|
|
reg = get_frame_register_unsigned (this_frame, S390_RETADDR_REGNUM);
|
|
reg = gdbarch_addr_bits_remove (gdbarch, reg) - 1;
|
|
if (get_pc_function_start (reg) == func)
|
|
{
|
|
/* However, there is one case where it *is* valid for %r14
|
|
to point to the same function -- if this is a recursive
|
|
call, and we have stopped in the prologue *before* the
|
|
stack frame was allocated.
|
|
|
|
Recognize this case by looking ahead a bit ... */
|
|
|
|
struct s390_prologue_data data2;
|
|
pv_t *sp = &data2.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
|
|
|
|
if (!(s390_analyze_prologue (gdbarch, func, (CORE_ADDR)-1, &data2)
|
|
&& pv_is_register (*sp, S390_SP_REGNUM)
|
|
&& sp->k != 0))
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
|
|
/* OK, we've found valid prologue data. */
|
|
size = -sp->k;
|
|
|
|
/* If the frame pointer originally also holds the same value
|
|
as the stack pointer, we're probably using it. If it holds
|
|
some other value -- even a constant offset -- it is most
|
|
likely used as temp register. */
|
|
if (pv_is_identical (*sp, *fp))
|
|
frame_pointer = S390_FRAME_REGNUM;
|
|
else
|
|
frame_pointer = S390_SP_REGNUM;
|
|
|
|
/* If we've detected a function with stack frame, we'll still have to
|
|
treat it as frameless if we're currently within the function epilog
|
|
code at a point where the frame pointer has already been restored.
|
|
This can only happen in an innermost frame. */
|
|
/* FIXME: cagney/2004-05-01: This sanity check shouldn't be needed,
|
|
instead the code should simpliy rely on its analysis. */
|
|
next_frame = get_next_frame (this_frame);
|
|
while (next_frame && get_frame_type (next_frame) == INLINE_FRAME)
|
|
next_frame = get_next_frame (next_frame);
|
|
if (size > 0
|
|
&& (next_frame == NULL
|
|
|| get_frame_type (get_next_frame (this_frame)) != NORMAL_FRAME))
|
|
{
|
|
/* See the comment in s390_in_function_epilogue_p on why this is
|
|
not completely reliable ... */
|
|
if (s390_in_function_epilogue_p (gdbarch, get_frame_pc (this_frame)))
|
|
{
|
|
memset (&data, 0, sizeof (data));
|
|
size = 0;
|
|
frame_pointer = S390_SP_REGNUM;
|
|
}
|
|
}
|
|
|
|
/* Once we know the frame register and the frame size, we can unwind
|
|
the current value of the frame register from the next frame, and
|
|
add back the frame size to arrive that the previous frame's
|
|
stack pointer value. */
|
|
prev_sp = get_frame_register_unsigned (this_frame, frame_pointer) + size;
|
|
cfa = prev_sp + 16*word_size + 32;
|
|
|
|
/* Set up ABI call-saved/call-clobbered registers. */
|
|
for (i = 0; i < S390_NUM_REGS; i++)
|
|
if (!s390_register_call_saved (gdbarch, i))
|
|
trad_frame_set_unknown (info->saved_regs, i);
|
|
|
|
/* CC is always call-clobbered. */
|
|
trad_frame_set_unknown (info->saved_regs, S390_PSWM_REGNUM);
|
|
|
|
/* Record the addresses of all register spill slots the prologue parser
|
|
has recognized. Consider only registers defined as call-saved by the
|
|
ABI; for call-clobbered registers the parser may have recognized
|
|
spurious stores. */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
if (s390_register_call_saved (gdbarch, S390_R0_REGNUM + i)
|
|
&& data.gpr_slot[i] != 0)
|
|
info->saved_regs[S390_R0_REGNUM + i].addr = cfa - data.gpr_slot[i];
|
|
|
|
for (i = 0; i < 16; i++)
|
|
if (s390_register_call_saved (gdbarch, S390_F0_REGNUM + i)
|
|
&& data.fpr_slot[i] != 0)
|
|
info->saved_regs[S390_F0_REGNUM + i].addr = cfa - data.fpr_slot[i];
|
|
|
|
/* Function return will set PC to %r14. */
|
|
info->saved_regs[S390_PSWA_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM];
|
|
|
|
/* In frameless functions, we unwind simply by moving the return
|
|
address to the PC. However, if we actually stored to the
|
|
save area, use that -- we might only think the function frameless
|
|
because we're in the middle of the prologue ... */
|
|
if (size == 0
|
|
&& !trad_frame_addr_p (info->saved_regs, S390_PSWA_REGNUM))
|
|
{
|
|
info->saved_regs[S390_PSWA_REGNUM].realreg = S390_RETADDR_REGNUM;
|
|
}
|
|
|
|
/* Another sanity check: unless this is a frameless function,
|
|
we should have found spill slots for SP and PC.
|
|
If not, we cannot unwind further -- this happens e.g. in
|
|
libc's thread_start routine. */
|
|
if (size > 0)
|
|
{
|
|
if (!trad_frame_addr_p (info->saved_regs, S390_SP_REGNUM)
|
|
|| !trad_frame_addr_p (info->saved_regs, S390_PSWA_REGNUM))
|
|
prev_sp = -1;
|
|
}
|
|
|
|
/* We use the current value of the frame register as local_base,
|
|
and the top of the register save area as frame_base. */
|
|
if (prev_sp != -1)
|
|
{
|
|
info->frame_base = prev_sp + 16*word_size + 32;
|
|
info->local_base = prev_sp - size;
|
|
}
|
|
|
|
info->func = func;
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
s390_backchain_frame_unwind_cache (struct frame_info *this_frame,
|
|
struct s390_unwind_cache *info)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
CORE_ADDR backchain;
|
|
ULONGEST reg;
|
|
LONGEST sp;
|
|
int i;
|
|
|
|
/* Set up ABI call-saved/call-clobbered registers. */
|
|
for (i = 0; i < S390_NUM_REGS; i++)
|
|
if (!s390_register_call_saved (gdbarch, i))
|
|
trad_frame_set_unknown (info->saved_regs, i);
|
|
|
|
/* CC is always call-clobbered. */
|
|
trad_frame_set_unknown (info->saved_regs, S390_PSWM_REGNUM);
|
|
|
|
/* Get the backchain. */
|
|
reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
|
|
backchain = read_memory_unsigned_integer (reg, word_size, byte_order);
|
|
|
|
/* A zero backchain terminates the frame chain. As additional
|
|
sanity check, let's verify that the spill slot for SP in the
|
|
save area pointed to by the backchain in fact links back to
|
|
the save area. */
|
|
if (backchain != 0
|
|
&& safe_read_memory_integer (backchain + 15*word_size,
|
|
word_size, byte_order, &sp)
|
|
&& (CORE_ADDR)sp == backchain)
|
|
{
|
|
/* We don't know which registers were saved, but it will have
|
|
to be at least %r14 and %r15. This will allow us to continue
|
|
unwinding, but other prev-frame registers may be incorrect ... */
|
|
info->saved_regs[S390_SP_REGNUM].addr = backchain + 15*word_size;
|
|
info->saved_regs[S390_RETADDR_REGNUM].addr = backchain + 14*word_size;
|
|
|
|
/* Function return will set PC to %r14. */
|
|
info->saved_regs[S390_PSWA_REGNUM]
|
|
= info->saved_regs[S390_RETADDR_REGNUM];
|
|
|
|
/* We use the current value of the frame register as local_base,
|
|
and the top of the register save area as frame_base. */
|
|
info->frame_base = backchain + 16*word_size + 32;
|
|
info->local_base = reg;
|
|
}
|
|
|
|
info->func = get_frame_pc (this_frame);
|
|
}
|
|
|
|
static struct s390_unwind_cache *
|
|
s390_frame_unwind_cache (struct frame_info *this_frame,
|
|
void **this_prologue_cache)
|
|
{
|
|
volatile struct gdb_exception ex;
|
|
struct s390_unwind_cache *info;
|
|
|
|
if (*this_prologue_cache)
|
|
return *this_prologue_cache;
|
|
|
|
info = FRAME_OBSTACK_ZALLOC (struct s390_unwind_cache);
|
|
*this_prologue_cache = info;
|
|
info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
|
|
info->func = -1;
|
|
info->frame_base = -1;
|
|
info->local_base = -1;
|
|
|
|
TRY_CATCH (ex, RETURN_MASK_ERROR)
|
|
{
|
|
/* Try to use prologue analysis to fill the unwind cache.
|
|
If this fails, fall back to reading the stack backchain. */
|
|
if (!s390_prologue_frame_unwind_cache (this_frame, info))
|
|
s390_backchain_frame_unwind_cache (this_frame, info);
|
|
}
|
|
if (ex.reason < 0 && ex.error != NOT_AVAILABLE_ERROR)
|
|
throw_exception (ex);
|
|
|
|
return info;
|
|
}
|
|
|
|
static void
|
|
s390_frame_this_id (struct frame_info *this_frame,
|
|
void **this_prologue_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
struct s390_unwind_cache *info
|
|
= s390_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
|
|
if (info->frame_base == -1)
|
|
return;
|
|
|
|
*this_id = frame_id_build (info->frame_base, info->func);
|
|
}
|
|
|
|
static struct value *
|
|
s390_frame_prev_register (struct frame_info *this_frame,
|
|
void **this_prologue_cache, int regnum)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
struct s390_unwind_cache *info
|
|
= s390_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
|
|
return s390_trad_frame_prev_register (this_frame, info->saved_regs, regnum);
|
|
}
|
|
|
|
static const struct frame_unwind s390_frame_unwind = {
|
|
NORMAL_FRAME,
|
|
default_frame_unwind_stop_reason,
|
|
s390_frame_this_id,
|
|
s390_frame_prev_register,
|
|
NULL,
|
|
default_frame_sniffer
|
|
};
|
|
|
|
|
|
/* Code stubs and their stack frames. For things like PLTs and NULL
|
|
function calls (where there is no true frame and the return address
|
|
is in the RETADDR register). */
|
|
|
|
struct s390_stub_unwind_cache
|
|
{
|
|
CORE_ADDR frame_base;
|
|
struct trad_frame_saved_reg *saved_regs;
|
|
};
|
|
|
|
static struct s390_stub_unwind_cache *
|
|
s390_stub_frame_unwind_cache (struct frame_info *this_frame,
|
|
void **this_prologue_cache)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
struct s390_stub_unwind_cache *info;
|
|
ULONGEST reg;
|
|
|
|
if (*this_prologue_cache)
|
|
return *this_prologue_cache;
|
|
|
|
info = FRAME_OBSTACK_ZALLOC (struct s390_stub_unwind_cache);
|
|
*this_prologue_cache = info;
|
|
info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
|
|
|
|
/* The return address is in register %r14. */
|
|
info->saved_regs[S390_PSWA_REGNUM].realreg = S390_RETADDR_REGNUM;
|
|
|
|
/* Retrieve stack pointer and determine our frame base. */
|
|
reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
|
|
info->frame_base = reg + 16*word_size + 32;
|
|
|
|
return info;
|
|
}
|
|
|
|
static void
|
|
s390_stub_frame_this_id (struct frame_info *this_frame,
|
|
void **this_prologue_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
struct s390_stub_unwind_cache *info
|
|
= s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
*this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
|
|
}
|
|
|
|
static struct value *
|
|
s390_stub_frame_prev_register (struct frame_info *this_frame,
|
|
void **this_prologue_cache, int regnum)
|
|
{
|
|
struct s390_stub_unwind_cache *info
|
|
= s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
return s390_trad_frame_prev_register (this_frame, info->saved_regs, regnum);
|
|
}
|
|
|
|
static int
|
|
s390_stub_frame_sniffer (const struct frame_unwind *self,
|
|
struct frame_info *this_frame,
|
|
void **this_prologue_cache)
|
|
{
|
|
CORE_ADDR addr_in_block;
|
|
bfd_byte insn[S390_MAX_INSTR_SIZE];
|
|
|
|
/* If the current PC points to non-readable memory, we assume we
|
|
have trapped due to an invalid function pointer call. We handle
|
|
the non-existing current function like a PLT stub. */
|
|
addr_in_block = get_frame_address_in_block (this_frame);
|
|
if (in_plt_section (addr_in_block)
|
|
|| s390_readinstruction (insn, get_frame_pc (this_frame)) < 0)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static const struct frame_unwind s390_stub_frame_unwind = {
|
|
NORMAL_FRAME,
|
|
default_frame_unwind_stop_reason,
|
|
s390_stub_frame_this_id,
|
|
s390_stub_frame_prev_register,
|
|
NULL,
|
|
s390_stub_frame_sniffer
|
|
};
|
|
|
|
|
|
/* Signal trampoline stack frames. */
|
|
|
|
struct s390_sigtramp_unwind_cache {
|
|
CORE_ADDR frame_base;
|
|
struct trad_frame_saved_reg *saved_regs;
|
|
};
|
|
|
|
static struct s390_sigtramp_unwind_cache *
|
|
s390_sigtramp_frame_unwind_cache (struct frame_info *this_frame,
|
|
void **this_prologue_cache)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
struct s390_sigtramp_unwind_cache *info;
|
|
ULONGEST this_sp, prev_sp;
|
|
CORE_ADDR next_ra, next_cfa, sigreg_ptr, sigreg_high_off;
|
|
int i;
|
|
|
|
if (*this_prologue_cache)
|
|
return *this_prologue_cache;
|
|
|
|
info = FRAME_OBSTACK_ZALLOC (struct s390_sigtramp_unwind_cache);
|
|
*this_prologue_cache = info;
|
|
info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
|
|
|
|
this_sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
|
|
next_ra = get_frame_pc (this_frame);
|
|
next_cfa = this_sp + 16*word_size + 32;
|
|
|
|
/* New-style RT frame:
|
|
retcode + alignment (8 bytes)
|
|
siginfo (128 bytes)
|
|
ucontext (contains sigregs at offset 5 words). */
|
|
if (next_ra == next_cfa)
|
|
{
|
|
sigreg_ptr = next_cfa + 8 + 128 + align_up (5*word_size, 8);
|
|
/* sigregs are followed by uc_sigmask (8 bytes), then by the
|
|
upper GPR halves if present. */
|
|
sigreg_high_off = 8;
|
|
}
|
|
|
|
/* Old-style RT frame and all non-RT frames:
|
|
old signal mask (8 bytes)
|
|
pointer to sigregs. */
|
|
else
|
|
{
|
|
sigreg_ptr = read_memory_unsigned_integer (next_cfa + 8,
|
|
word_size, byte_order);
|
|
/* sigregs are followed by signo (4 bytes), then by the
|
|
upper GPR halves if present. */
|
|
sigreg_high_off = 4;
|
|
}
|
|
|
|
/* The sigregs structure looks like this:
|
|
long psw_mask;
|
|
long psw_addr;
|
|
long gprs[16];
|
|
int acrs[16];
|
|
int fpc;
|
|
int __pad;
|
|
double fprs[16]; */
|
|
|
|
/* PSW mask and address. */
|
|
info->saved_regs[S390_PSWM_REGNUM].addr = sigreg_ptr;
|
|
sigreg_ptr += word_size;
|
|
info->saved_regs[S390_PSWA_REGNUM].addr = sigreg_ptr;
|
|
sigreg_ptr += word_size;
|
|
|
|
/* Then the GPRs. */
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
info->saved_regs[S390_R0_REGNUM + i].addr = sigreg_ptr;
|
|
sigreg_ptr += word_size;
|
|
}
|
|
|
|
/* Then the ACRs. */
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
info->saved_regs[S390_A0_REGNUM + i].addr = sigreg_ptr;
|
|
sigreg_ptr += 4;
|
|
}
|
|
|
|
/* The floating-point control word. */
|
|
info->saved_regs[S390_FPC_REGNUM].addr = sigreg_ptr;
|
|
sigreg_ptr += 8;
|
|
|
|
/* And finally the FPRs. */
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
info->saved_regs[S390_F0_REGNUM + i].addr = sigreg_ptr;
|
|
sigreg_ptr += 8;
|
|
}
|
|
|
|
/* If we have them, the GPR upper halves are appended at the end. */
|
|
sigreg_ptr += sigreg_high_off;
|
|
if (tdep->gpr_full_regnum != -1)
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
info->saved_regs[S390_R0_UPPER_REGNUM + i].addr = sigreg_ptr;
|
|
sigreg_ptr += 4;
|
|
}
|
|
|
|
/* Restore the previous frame's SP. */
|
|
prev_sp = read_memory_unsigned_integer (
|
|
info->saved_regs[S390_SP_REGNUM].addr,
|
|
word_size, byte_order);
|
|
|
|
/* Determine our frame base. */
|
|
info->frame_base = prev_sp + 16*word_size + 32;
|
|
|
|
return info;
|
|
}
|
|
|
|
static void
|
|
s390_sigtramp_frame_this_id (struct frame_info *this_frame,
|
|
void **this_prologue_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
struct s390_sigtramp_unwind_cache *info
|
|
= s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
*this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
|
|
}
|
|
|
|
static struct value *
|
|
s390_sigtramp_frame_prev_register (struct frame_info *this_frame,
|
|
void **this_prologue_cache, int regnum)
|
|
{
|
|
struct s390_sigtramp_unwind_cache *info
|
|
= s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
return s390_trad_frame_prev_register (this_frame, info->saved_regs, regnum);
|
|
}
|
|
|
|
static int
|
|
s390_sigtramp_frame_sniffer (const struct frame_unwind *self,
|
|
struct frame_info *this_frame,
|
|
void **this_prologue_cache)
|
|
{
|
|
CORE_ADDR pc = get_frame_pc (this_frame);
|
|
bfd_byte sigreturn[2];
|
|
|
|
if (target_read_memory (pc, sigreturn, 2))
|
|
return 0;
|
|
|
|
if (sigreturn[0] != op_svc)
|
|
return 0;
|
|
|
|
if (sigreturn[1] != 119 /* sigreturn */
|
|
&& sigreturn[1] != 173 /* rt_sigreturn */)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct frame_unwind s390_sigtramp_frame_unwind = {
|
|
SIGTRAMP_FRAME,
|
|
default_frame_unwind_stop_reason,
|
|
s390_sigtramp_frame_this_id,
|
|
s390_sigtramp_frame_prev_register,
|
|
NULL,
|
|
s390_sigtramp_frame_sniffer
|
|
};
|
|
|
|
/* Retrieve the syscall number at a ptrace syscall-stop. Return -1
|
|
upon error. */
|
|
|
|
static LONGEST
|
|
s390_linux_get_syscall_number (struct gdbarch *gdbarch,
|
|
ptid_t ptid)
|
|
{
|
|
struct regcache *regs = get_thread_regcache (ptid);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
ULONGEST pc;
|
|
ULONGEST svc_number = -1;
|
|
unsigned opcode;
|
|
|
|
/* Assume that the PC points after the 2-byte SVC instruction. We
|
|
don't currently support SVC via EXECUTE. */
|
|
regcache_cooked_read_unsigned (regs, tdep->pc_regnum, &pc);
|
|
pc -= 2;
|
|
opcode = read_memory_unsigned_integer ((CORE_ADDR) pc, 1, byte_order);
|
|
if (opcode != op_svc)
|
|
return -1;
|
|
|
|
svc_number = read_memory_unsigned_integer ((CORE_ADDR) pc + 1, 1,
|
|
byte_order);
|
|
if (svc_number == 0)
|
|
regcache_cooked_read_unsigned (regs, S390_R1_REGNUM, &svc_number);
|
|
|
|
return svc_number;
|
|
}
|
|
|
|
|
|
/* Frame base handling. */
|
|
|
|
static CORE_ADDR
|
|
s390_frame_base_address (struct frame_info *this_frame, void **this_cache)
|
|
{
|
|
struct s390_unwind_cache *info
|
|
= s390_frame_unwind_cache (this_frame, this_cache);
|
|
return info->frame_base;
|
|
}
|
|
|
|
static CORE_ADDR
|
|
s390_local_base_address (struct frame_info *this_frame, void **this_cache)
|
|
{
|
|
struct s390_unwind_cache *info
|
|
= s390_frame_unwind_cache (this_frame, this_cache);
|
|
return info->local_base;
|
|
}
|
|
|
|
static const struct frame_base s390_frame_base = {
|
|
&s390_frame_unwind,
|
|
s390_frame_base_address,
|
|
s390_local_base_address,
|
|
s390_local_base_address
|
|
};
|
|
|
|
static CORE_ADDR
|
|
s390_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
ULONGEST pc;
|
|
pc = frame_unwind_register_unsigned (next_frame, tdep->pc_regnum);
|
|
return gdbarch_addr_bits_remove (gdbarch, pc);
|
|
}
|
|
|
|
static CORE_ADDR
|
|
s390_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
|
|
{
|
|
ULONGEST sp;
|
|
sp = frame_unwind_register_unsigned (next_frame, S390_SP_REGNUM);
|
|
return gdbarch_addr_bits_remove (gdbarch, sp);
|
|
}
|
|
|
|
|
|
/* DWARF-2 frame support. */
|
|
|
|
static struct value *
|
|
s390_dwarf2_prev_register (struct frame_info *this_frame, void **this_cache,
|
|
int regnum)
|
|
{
|
|
return s390_unwind_pseudo_register (this_frame, regnum);
|
|
}
|
|
|
|
static void
|
|
s390_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
|
|
struct dwarf2_frame_state_reg *reg,
|
|
struct frame_info *this_frame)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
/* The condition code (and thus PSW mask) is call-clobbered. */
|
|
if (regnum == S390_PSWM_REGNUM)
|
|
reg->how = DWARF2_FRAME_REG_UNDEFINED;
|
|
|
|
/* The PSW address unwinds to the return address. */
|
|
else if (regnum == S390_PSWA_REGNUM)
|
|
reg->how = DWARF2_FRAME_REG_RA;
|
|
|
|
/* Fixed registers are call-saved or call-clobbered
|
|
depending on the ABI in use. */
|
|
else if (regnum < S390_NUM_REGS)
|
|
{
|
|
if (s390_register_call_saved (gdbarch, regnum))
|
|
reg->how = DWARF2_FRAME_REG_SAME_VALUE;
|
|
else
|
|
reg->how = DWARF2_FRAME_REG_UNDEFINED;
|
|
}
|
|
|
|
/* We install a special function to unwind pseudos. */
|
|
else
|
|
{
|
|
reg->how = DWARF2_FRAME_REG_FN;
|
|
reg->loc.fn = s390_dwarf2_prev_register;
|
|
}
|
|
}
|
|
|
|
|
|
/* Dummy function calls. */
|
|
|
|
/* Return non-zero if TYPE is an integer-like type, zero otherwise.
|
|
"Integer-like" types are those that should be passed the way
|
|
integers are: integers, enums, ranges, characters, and booleans. */
|
|
static int
|
|
is_integer_like (struct type *type)
|
|
{
|
|
enum type_code code = TYPE_CODE (type);
|
|
|
|
return (code == TYPE_CODE_INT
|
|
|| code == TYPE_CODE_ENUM
|
|
|| code == TYPE_CODE_RANGE
|
|
|| code == TYPE_CODE_CHAR
|
|
|| code == TYPE_CODE_BOOL);
|
|
}
|
|
|
|
/* Return non-zero if TYPE is a pointer-like type, zero otherwise.
|
|
"Pointer-like" types are those that should be passed the way
|
|
pointers are: pointers and references. */
|
|
static int
|
|
is_pointer_like (struct type *type)
|
|
{
|
|
enum type_code code = TYPE_CODE (type);
|
|
|
|
return (code == TYPE_CODE_PTR
|
|
|| code == TYPE_CODE_REF);
|
|
}
|
|
|
|
|
|
/* Return non-zero if TYPE is a `float singleton' or `double
|
|
singleton', zero otherwise.
|
|
|
|
A `T singleton' is a struct type with one member, whose type is
|
|
either T or a `T singleton'. So, the following are all float
|
|
singletons:
|
|
|
|
struct { float x };
|
|
struct { struct { float x; } x; };
|
|
struct { struct { struct { float x; } x; } x; };
|
|
|
|
... and so on.
|
|
|
|
All such structures are passed as if they were floats or doubles,
|
|
as the (revised) ABI says. */
|
|
static int
|
|
is_float_singleton (struct type *type)
|
|
{
|
|
if (TYPE_CODE (type) == TYPE_CODE_STRUCT && TYPE_NFIELDS (type) == 1)
|
|
{
|
|
struct type *singleton_type = TYPE_FIELD_TYPE (type, 0);
|
|
CHECK_TYPEDEF (singleton_type);
|
|
|
|
return (TYPE_CODE (singleton_type) == TYPE_CODE_FLT
|
|
|| TYPE_CODE (singleton_type) == TYPE_CODE_DECFLOAT
|
|
|| is_float_singleton (singleton_type));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Return non-zero if TYPE is a struct-like type, zero otherwise.
|
|
"Struct-like" types are those that should be passed as structs are:
|
|
structs and unions.
|
|
|
|
As an odd quirk, not mentioned in the ABI, GCC passes float and
|
|
double singletons as if they were a plain float, double, etc. (The
|
|
corresponding union types are handled normally.) So we exclude
|
|
those types here. *shrug* */
|
|
static int
|
|
is_struct_like (struct type *type)
|
|
{
|
|
enum type_code code = TYPE_CODE (type);
|
|
|
|
return (code == TYPE_CODE_UNION
|
|
|| (code == TYPE_CODE_STRUCT && ! is_float_singleton (type)));
|
|
}
|
|
|
|
|
|
/* Return non-zero if TYPE is a float-like type, zero otherwise.
|
|
"Float-like" types are those that should be passed as
|
|
floating-point values are.
|
|
|
|
You'd think this would just be floats, doubles, long doubles, etc.
|
|
But as an odd quirk, not mentioned in the ABI, GCC passes float and
|
|
double singletons as if they were a plain float, double, etc. (The
|
|
corresponding union types are handled normally.) So we include
|
|
those types here. *shrug* */
|
|
static int
|
|
is_float_like (struct type *type)
|
|
{
|
|
return (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
|| TYPE_CODE (type) == TYPE_CODE_DECFLOAT
|
|
|| is_float_singleton (type));
|
|
}
|
|
|
|
|
|
static int
|
|
is_power_of_two (unsigned int n)
|
|
{
|
|
return ((n & (n - 1)) == 0);
|
|
}
|
|
|
|
/* Return non-zero if TYPE should be passed as a pointer to a copy,
|
|
zero otherwise. */
|
|
static int
|
|
s390_function_arg_pass_by_reference (struct type *type)
|
|
{
|
|
if (TYPE_LENGTH (type) > 8)
|
|
return 1;
|
|
|
|
return (is_struct_like (type) && !is_power_of_two (TYPE_LENGTH (type)))
|
|
|| TYPE_CODE (type) == TYPE_CODE_COMPLEX
|
|
|| (TYPE_CODE (type) == TYPE_CODE_ARRAY && TYPE_VECTOR (type));
|
|
}
|
|
|
|
/* Return non-zero if TYPE should be passed in a float register
|
|
if possible. */
|
|
static int
|
|
s390_function_arg_float (struct type *type)
|
|
{
|
|
if (TYPE_LENGTH (type) > 8)
|
|
return 0;
|
|
|
|
return is_float_like (type);
|
|
}
|
|
|
|
/* Return non-zero if TYPE should be passed in an integer register
|
|
(or a pair of integer registers) if possible. */
|
|
static int
|
|
s390_function_arg_integer (struct type *type)
|
|
{
|
|
if (TYPE_LENGTH (type) > 8)
|
|
return 0;
|
|
|
|
return is_integer_like (type)
|
|
|| is_pointer_like (type)
|
|
|| (is_struct_like (type) && is_power_of_two (TYPE_LENGTH (type)));
|
|
}
|
|
|
|
/* Return ARG, a `SIMPLE_ARG', sign-extended or zero-extended to a full
|
|
word as required for the ABI. */
|
|
static LONGEST
|
|
extend_simple_arg (struct gdbarch *gdbarch, struct value *arg)
|
|
{
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
struct type *type = check_typedef (value_type (arg));
|
|
|
|
/* Even structs get passed in the least significant bits of the
|
|
register / memory word. It's not really right to extract them as
|
|
an integer, but it does take care of the extension. */
|
|
if (TYPE_UNSIGNED (type))
|
|
return extract_unsigned_integer (value_contents (arg),
|
|
TYPE_LENGTH (type), byte_order);
|
|
else
|
|
return extract_signed_integer (value_contents (arg),
|
|
TYPE_LENGTH (type), byte_order);
|
|
}
|
|
|
|
|
|
/* Return the alignment required by TYPE. */
|
|
static int
|
|
alignment_of (struct type *type)
|
|
{
|
|
int alignment;
|
|
|
|
if (is_integer_like (type)
|
|
|| is_pointer_like (type)
|
|
|| TYPE_CODE (type) == TYPE_CODE_FLT
|
|
|| TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
|
|
alignment = TYPE_LENGTH (type);
|
|
else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
|
|
|| TYPE_CODE (type) == TYPE_CODE_UNION)
|
|
{
|
|
int i;
|
|
|
|
alignment = 1;
|
|
for (i = 0; i < TYPE_NFIELDS (type); i++)
|
|
{
|
|
int field_alignment
|
|
= alignment_of (check_typedef (TYPE_FIELD_TYPE (type, i)));
|
|
|
|
if (field_alignment > alignment)
|
|
alignment = field_alignment;
|
|
}
|
|
}
|
|
else
|
|
alignment = 1;
|
|
|
|
/* Check that everything we ever return is a power of two. Lots of
|
|
code doesn't want to deal with aligning things to arbitrary
|
|
boundaries. */
|
|
gdb_assert ((alignment & (alignment - 1)) == 0);
|
|
|
|
return alignment;
|
|
}
|
|
|
|
|
|
/* Put the actual parameter values pointed to by ARGS[0..NARGS-1] in
|
|
place to be passed to a function, as specified by the "GNU/Linux
|
|
for S/390 ELF Application Binary Interface Supplement".
|
|
|
|
SP is the current stack pointer. We must put arguments, links,
|
|
padding, etc. whereever they belong, and return the new stack
|
|
pointer value.
|
|
|
|
If STRUCT_RETURN is non-zero, then the function we're calling is
|
|
going to return a structure by value; STRUCT_ADDR is the address of
|
|
a block we've allocated for it on the stack.
|
|
|
|
Our caller has taken care of any type promotions needed to satisfy
|
|
prototypes or the old K&R argument-passing rules. */
|
|
static CORE_ADDR
|
|
s390_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
|
|
struct regcache *regcache, CORE_ADDR bp_addr,
|
|
int nargs, struct value **args, CORE_ADDR sp,
|
|
int struct_return, CORE_ADDR struct_addr)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int i;
|
|
|
|
/* If the i'th argument is passed as a reference to a copy, then
|
|
copy_addr[i] is the address of the copy we made. */
|
|
CORE_ADDR *copy_addr = alloca (nargs * sizeof (CORE_ADDR));
|
|
|
|
/* Reserve space for the reference-to-copy area. */
|
|
for (i = 0; i < nargs; i++)
|
|
{
|
|
struct value *arg = args[i];
|
|
struct type *type = check_typedef (value_type (arg));
|
|
|
|
if (s390_function_arg_pass_by_reference (type))
|
|
{
|
|
sp -= TYPE_LENGTH (type);
|
|
sp = align_down (sp, alignment_of (type));
|
|
copy_addr[i] = sp;
|
|
}
|
|
}
|
|
|
|
/* Reserve space for the parameter area. As a conservative
|
|
simplification, we assume that everything will be passed on the
|
|
stack. Since every argument larger than 8 bytes will be
|
|
passed by reference, we use this simple upper bound. */
|
|
sp -= nargs * 8;
|
|
|
|
/* After all that, make sure it's still aligned on an eight-byte
|
|
boundary. */
|
|
sp = align_down (sp, 8);
|
|
|
|
/* Allocate the standard frame areas: the register save area, the
|
|
word reserved for the compiler (which seems kind of meaningless),
|
|
and the back chain pointer. */
|
|
sp -= 16*word_size + 32;
|
|
|
|
/* Now we have the final SP value. Make sure we didn't underflow;
|
|
on 31-bit, this would result in addresses with the high bit set,
|
|
which causes confusion elsewhere. Note that if we error out
|
|
here, stack and registers remain untouched. */
|
|
if (gdbarch_addr_bits_remove (gdbarch, sp) != sp)
|
|
error (_("Stack overflow"));
|
|
|
|
|
|
/* Finally, place the actual parameters, working from SP towards
|
|
higher addresses. The code above is supposed to reserve enough
|
|
space for this. */
|
|
{
|
|
int fr = 0;
|
|
int gr = 2;
|
|
CORE_ADDR starg = sp + 16*word_size + 32;
|
|
|
|
/* A struct is returned using general register 2. */
|
|
if (struct_return)
|
|
{
|
|
regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
|
|
struct_addr);
|
|
gr++;
|
|
}
|
|
|
|
for (i = 0; i < nargs; i++)
|
|
{
|
|
struct value *arg = args[i];
|
|
struct type *type = check_typedef (value_type (arg));
|
|
unsigned length = TYPE_LENGTH (type);
|
|
|
|
if (s390_function_arg_pass_by_reference (type))
|
|
{
|
|
/* Actually copy the argument contents to the stack slot
|
|
that was reserved above. */
|
|
write_memory (copy_addr[i], value_contents (arg), length);
|
|
|
|
if (gr <= 6)
|
|
{
|
|
regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
|
|
copy_addr[i]);
|
|
gr++;
|
|
}
|
|
else
|
|
{
|
|
write_memory_unsigned_integer (starg, word_size, byte_order,
|
|
copy_addr[i]);
|
|
starg += word_size;
|
|
}
|
|
}
|
|
else if (s390_function_arg_float (type))
|
|
{
|
|
/* The GNU/Linux for S/390 ABI uses FPRs 0 and 2 to pass arguments,
|
|
the GNU/Linux for zSeries ABI uses 0, 2, 4, and 6. */
|
|
if (fr <= (tdep->abi == ABI_LINUX_S390 ? 2 : 6))
|
|
{
|
|
/* When we store a single-precision value in an FP register,
|
|
it occupies the leftmost bits. */
|
|
regcache_cooked_write_part (regcache, S390_F0_REGNUM + fr,
|
|
0, length, value_contents (arg));
|
|
fr += 2;
|
|
}
|
|
else
|
|
{
|
|
/* When we store a single-precision value in a stack slot,
|
|
it occupies the rightmost bits. */
|
|
starg = align_up (starg + length, word_size);
|
|
write_memory (starg - length, value_contents (arg), length);
|
|
}
|
|
}
|
|
else if (s390_function_arg_integer (type) && length <= word_size)
|
|
{
|
|
if (gr <= 6)
|
|
{
|
|
/* Integer arguments are always extended to word size. */
|
|
regcache_cooked_write_signed (regcache, S390_R0_REGNUM + gr,
|
|
extend_simple_arg (gdbarch,
|
|
arg));
|
|
gr++;
|
|
}
|
|
else
|
|
{
|
|
/* Integer arguments are always extended to word size. */
|
|
write_memory_signed_integer (starg, word_size, byte_order,
|
|
extend_simple_arg (gdbarch, arg));
|
|
starg += word_size;
|
|
}
|
|
}
|
|
else if (s390_function_arg_integer (type) && length == 2*word_size)
|
|
{
|
|
if (gr <= 5)
|
|
{
|
|
regcache_cooked_write (regcache, S390_R0_REGNUM + gr,
|
|
value_contents (arg));
|
|
regcache_cooked_write (regcache, S390_R0_REGNUM + gr + 1,
|
|
value_contents (arg) + word_size);
|
|
gr += 2;
|
|
}
|
|
else
|
|
{
|
|
/* If we skipped r6 because we couldn't fit a DOUBLE_ARG
|
|
in it, then don't go back and use it again later. */
|
|
gr = 7;
|
|
|
|
write_memory (starg, value_contents (arg), length);
|
|
starg += length;
|
|
}
|
|
}
|
|
else
|
|
internal_error (__FILE__, __LINE__, _("unknown argument type"));
|
|
}
|
|
}
|
|
|
|
/* Store return PSWA. In 31-bit mode, keep addressing mode bit. */
|
|
if (word_size == 4)
|
|
{
|
|
ULONGEST pswa;
|
|
regcache_cooked_read_unsigned (regcache, S390_PSWA_REGNUM, &pswa);
|
|
bp_addr = (bp_addr & 0x7fffffff) | (pswa & 0x80000000);
|
|
}
|
|
regcache_cooked_write_unsigned (regcache, S390_RETADDR_REGNUM, bp_addr);
|
|
|
|
/* Store updated stack pointer. */
|
|
regcache_cooked_write_unsigned (regcache, S390_SP_REGNUM, sp);
|
|
|
|
/* We need to return the 'stack part' of the frame ID,
|
|
which is actually the top of the register save area. */
|
|
return sp + 16*word_size + 32;
|
|
}
|
|
|
|
/* Assuming THIS_FRAME is a dummy, return the frame ID of that
|
|
dummy frame. The frame ID's base needs to match the TOS value
|
|
returned by push_dummy_call, and the PC match the dummy frame's
|
|
breakpoint. */
|
|
static struct frame_id
|
|
s390_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
|
|
{
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
CORE_ADDR sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
|
|
sp = gdbarch_addr_bits_remove (gdbarch, sp);
|
|
|
|
return frame_id_build (sp + 16*word_size + 32,
|
|
get_frame_pc (this_frame));
|
|
}
|
|
|
|
static CORE_ADDR
|
|
s390_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
|
|
{
|
|
/* Both the 32- and 64-bit ABI's say that the stack pointer should
|
|
always be aligned on an eight-byte boundary. */
|
|
return (addr & -8);
|
|
}
|
|
|
|
|
|
/* Function return value access. */
|
|
|
|
static enum return_value_convention
|
|
s390_return_value_convention (struct gdbarch *gdbarch, struct type *type)
|
|
{
|
|
if (TYPE_LENGTH (type) > 8)
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
|
|
switch (TYPE_CODE (type))
|
|
{
|
|
case TYPE_CODE_STRUCT:
|
|
case TYPE_CODE_UNION:
|
|
case TYPE_CODE_ARRAY:
|
|
case TYPE_CODE_COMPLEX:
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
|
|
default:
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
}
|
|
|
|
static enum return_value_convention
|
|
s390_return_value (struct gdbarch *gdbarch, struct value *function,
|
|
struct type *type, struct regcache *regcache,
|
|
gdb_byte *out, const gdb_byte *in)
|
|
{
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
|
enum return_value_convention rvc;
|
|
int length;
|
|
|
|
type = check_typedef (type);
|
|
rvc = s390_return_value_convention (gdbarch, type);
|
|
length = TYPE_LENGTH (type);
|
|
|
|
if (in)
|
|
{
|
|
switch (rvc)
|
|
{
|
|
case RETURN_VALUE_REGISTER_CONVENTION:
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
|| TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
|
|
{
|
|
/* When we store a single-precision value in an FP register,
|
|
it occupies the leftmost bits. */
|
|
regcache_cooked_write_part (regcache, S390_F0_REGNUM,
|
|
0, length, in);
|
|
}
|
|
else if (length <= word_size)
|
|
{
|
|
/* Integer arguments are always extended to word size. */
|
|
if (TYPE_UNSIGNED (type))
|
|
regcache_cooked_write_unsigned (regcache, S390_R2_REGNUM,
|
|
extract_unsigned_integer (in, length, byte_order));
|
|
else
|
|
regcache_cooked_write_signed (regcache, S390_R2_REGNUM,
|
|
extract_signed_integer (in, length, byte_order));
|
|
}
|
|
else if (length == 2*word_size)
|
|
{
|
|
regcache_cooked_write (regcache, S390_R2_REGNUM, in);
|
|
regcache_cooked_write (regcache, S390_R3_REGNUM, in + word_size);
|
|
}
|
|
else
|
|
internal_error (__FILE__, __LINE__, _("invalid return type"));
|
|
break;
|
|
|
|
case RETURN_VALUE_STRUCT_CONVENTION:
|
|
error (_("Cannot set function return value."));
|
|
break;
|
|
}
|
|
}
|
|
else if (out)
|
|
{
|
|
switch (rvc)
|
|
{
|
|
case RETURN_VALUE_REGISTER_CONVENTION:
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT
|
|
|| TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
|
|
{
|
|
/* When we store a single-precision value in an FP register,
|
|
it occupies the leftmost bits. */
|
|
regcache_cooked_read_part (regcache, S390_F0_REGNUM,
|
|
0, length, out);
|
|
}
|
|
else if (length <= word_size)
|
|
{
|
|
/* Integer arguments occupy the rightmost bits. */
|
|
regcache_cooked_read_part (regcache, S390_R2_REGNUM,
|
|
word_size - length, length, out);
|
|
}
|
|
else if (length == 2*word_size)
|
|
{
|
|
regcache_cooked_read (regcache, S390_R2_REGNUM, out);
|
|
regcache_cooked_read (regcache, S390_R3_REGNUM, out + word_size);
|
|
}
|
|
else
|
|
internal_error (__FILE__, __LINE__, _("invalid return type"));
|
|
break;
|
|
|
|
case RETURN_VALUE_STRUCT_CONVENTION:
|
|
error (_("Function return value unknown."));
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rvc;
|
|
}
|
|
|
|
|
|
/* Breakpoints. */
|
|
|
|
static const gdb_byte *
|
|
s390_breakpoint_from_pc (struct gdbarch *gdbarch,
|
|
CORE_ADDR *pcptr, int *lenptr)
|
|
{
|
|
static const gdb_byte breakpoint[] = { 0x0, 0x1 };
|
|
|
|
*lenptr = sizeof (breakpoint);
|
|
return breakpoint;
|
|
}
|
|
|
|
|
|
/* Address handling. */
|
|
|
|
static CORE_ADDR
|
|
s390_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
|
|
{
|
|
return addr & 0x7fffffff;
|
|
}
|
|
|
|
static int
|
|
s390_address_class_type_flags (int byte_size, int dwarf2_addr_class)
|
|
{
|
|
if (byte_size == 4)
|
|
return TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static const char *
|
|
s390_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags)
|
|
{
|
|
if (type_flags & TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1)
|
|
return "mode32";
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
s390_address_class_name_to_type_flags (struct gdbarch *gdbarch,
|
|
const char *name,
|
|
int *type_flags_ptr)
|
|
{
|
|
if (strcmp (name, "mode32") == 0)
|
|
{
|
|
*type_flags_ptr = TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
|
|
return 1;
|
|
}
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Implementation of `gdbarch_stap_is_single_operand', as defined in
|
|
gdbarch.h. */
|
|
|
|
static int
|
|
s390_stap_is_single_operand (struct gdbarch *gdbarch, const char *s)
|
|
{
|
|
return ((isdigit (*s) && s[1] == '(' && s[2] == '%') /* Displacement
|
|
or indirection. */
|
|
|| *s == '%' /* Register access. */
|
|
|| isdigit (*s)); /* Literal number. */
|
|
}
|
|
|
|
/* Set up gdbarch struct. */
|
|
|
|
static struct gdbarch *
|
|
s390_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
|
|
{
|
|
const struct target_desc *tdesc = info.target_desc;
|
|
struct tdesc_arch_data *tdesc_data = NULL;
|
|
struct gdbarch *gdbarch;
|
|
struct gdbarch_tdep *tdep;
|
|
int tdep_abi;
|
|
int have_upper = 0;
|
|
int have_linux_v1 = 0;
|
|
int have_linux_v2 = 0;
|
|
int first_pseudo_reg, last_pseudo_reg;
|
|
static const char *const stap_register_prefixes[] = { "%", NULL };
|
|
static const char *const stap_register_indirection_prefixes[] = { "(",
|
|
NULL };
|
|
static const char *const stap_register_indirection_suffixes[] = { ")",
|
|
NULL };
|
|
|
|
/* Default ABI and register size. */
|
|
switch (info.bfd_arch_info->mach)
|
|
{
|
|
case bfd_mach_s390_31:
|
|
tdep_abi = ABI_LINUX_S390;
|
|
break;
|
|
|
|
case bfd_mach_s390_64:
|
|
tdep_abi = ABI_LINUX_ZSERIES;
|
|
break;
|
|
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
/* Use default target description if none provided by the target. */
|
|
if (!tdesc_has_registers (tdesc))
|
|
{
|
|
if (tdep_abi == ABI_LINUX_S390)
|
|
tdesc = tdesc_s390_linux32;
|
|
else
|
|
tdesc = tdesc_s390x_linux64;
|
|
}
|
|
|
|
/* Check any target description for validity. */
|
|
if (tdesc_has_registers (tdesc))
|
|
{
|
|
static const char *const gprs[] = {
|
|
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
|
|
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15"
|
|
};
|
|
static const char *const fprs[] = {
|
|
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
|
|
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15"
|
|
};
|
|
static const char *const acrs[] = {
|
|
"acr0", "acr1", "acr2", "acr3", "acr4", "acr5", "acr6", "acr7",
|
|
"acr8", "acr9", "acr10", "acr11", "acr12", "acr13", "acr14", "acr15"
|
|
};
|
|
static const char *const gprs_lower[] = {
|
|
"r0l", "r1l", "r2l", "r3l", "r4l", "r5l", "r6l", "r7l",
|
|
"r8l", "r9l", "r10l", "r11l", "r12l", "r13l", "r14l", "r15l"
|
|
};
|
|
static const char *const gprs_upper[] = {
|
|
"r0h", "r1h", "r2h", "r3h", "r4h", "r5h", "r6h", "r7h",
|
|
"r8h", "r9h", "r10h", "r11h", "r12h", "r13h", "r14h", "r15h"
|
|
};
|
|
static const char *const tdb_regs[] = {
|
|
"tdb0", "tac", "tct", "atia",
|
|
"tr0", "tr1", "tr2", "tr3", "tr4", "tr5", "tr6", "tr7",
|
|
"tr8", "tr9", "tr10", "tr11", "tr12", "tr13", "tr14", "tr15"
|
|
};
|
|
const struct tdesc_feature *feature;
|
|
int i, valid_p = 1;
|
|
|
|
feature = tdesc_find_feature (tdesc, "org.gnu.gdb.s390.core");
|
|
if (feature == NULL)
|
|
return NULL;
|
|
|
|
tdesc_data = tdesc_data_alloc ();
|
|
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_PSWM_REGNUM, "pswm");
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_PSWA_REGNUM, "pswa");
|
|
|
|
if (tdesc_unnumbered_register (feature, "r0"))
|
|
{
|
|
for (i = 0; i < 16; i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_R0_REGNUM + i, gprs[i]);
|
|
}
|
|
else
|
|
{
|
|
have_upper = 1;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_R0_REGNUM + i,
|
|
gprs_lower[i]);
|
|
for (i = 0; i < 16; i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_R0_UPPER_REGNUM + i,
|
|
gprs_upper[i]);
|
|
}
|
|
|
|
feature = tdesc_find_feature (tdesc, "org.gnu.gdb.s390.fpr");
|
|
if (feature == NULL)
|
|
{
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return NULL;
|
|
}
|
|
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_FPC_REGNUM, "fpc");
|
|
for (i = 0; i < 16; i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_F0_REGNUM + i, fprs[i]);
|
|
|
|
feature = tdesc_find_feature (tdesc, "org.gnu.gdb.s390.acr");
|
|
if (feature == NULL)
|
|
{
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return NULL;
|
|
}
|
|
|
|
for (i = 0; i < 16; i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_A0_REGNUM + i, acrs[i]);
|
|
|
|
/* Optional GNU/Linux-specific "registers". */
|
|
feature = tdesc_find_feature (tdesc, "org.gnu.gdb.s390.linux");
|
|
if (feature)
|
|
{
|
|
tdesc_numbered_register (feature, tdesc_data,
|
|
S390_ORIG_R2_REGNUM, "orig_r2");
|
|
|
|
if (tdesc_numbered_register (feature, tdesc_data,
|
|
S390_LAST_BREAK_REGNUM, "last_break"))
|
|
have_linux_v1 = 1;
|
|
|
|
if (tdesc_numbered_register (feature, tdesc_data,
|
|
S390_SYSTEM_CALL_REGNUM, "system_call"))
|
|
have_linux_v2 = 1;
|
|
|
|
if (have_linux_v2 > have_linux_v1)
|
|
valid_p = 0;
|
|
}
|
|
|
|
/* Transaction diagnostic block. */
|
|
feature = tdesc_find_feature (tdesc, "org.gnu.gdb.s390.tdb");
|
|
if (feature)
|
|
{
|
|
for (i = 0; i < ARRAY_SIZE (tdb_regs); i++)
|
|
valid_p &= tdesc_numbered_register (feature, tdesc_data,
|
|
S390_TDB_DWORD0_REGNUM + i,
|
|
tdb_regs[i]);
|
|
}
|
|
|
|
if (!valid_p)
|
|
{
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
/* Find a candidate among extant architectures. */
|
|
for (arches = gdbarch_list_lookup_by_info (arches, &info);
|
|
arches != NULL;
|
|
arches = gdbarch_list_lookup_by_info (arches->next, &info))
|
|
{
|
|
tdep = gdbarch_tdep (arches->gdbarch);
|
|
if (!tdep)
|
|
continue;
|
|
if (tdep->abi != tdep_abi)
|
|
continue;
|
|
if ((tdep->gpr_full_regnum != -1) != have_upper)
|
|
continue;
|
|
if (tdesc_data != NULL)
|
|
tdesc_data_cleanup (tdesc_data);
|
|
return arches->gdbarch;
|
|
}
|
|
|
|
/* Otherwise create a new gdbarch for the specified machine type. */
|
|
tdep = XCNEW (struct gdbarch_tdep);
|
|
tdep->abi = tdep_abi;
|
|
gdbarch = gdbarch_alloc (&info, tdep);
|
|
|
|
set_gdbarch_believe_pcc_promotion (gdbarch, 0);
|
|
set_gdbarch_char_signed (gdbarch, 0);
|
|
|
|
/* S/390 GNU/Linux uses either 64-bit or 128-bit long doubles.
|
|
We can safely let them default to 128-bit, since the debug info
|
|
will give the size of type actually used in each case. */
|
|
set_gdbarch_long_double_bit (gdbarch, 128);
|
|
set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
|
|
|
|
/* Amount PC must be decremented by after a breakpoint. This is
|
|
often the number of bytes returned by gdbarch_breakpoint_from_pc but not
|
|
always. */
|
|
set_gdbarch_decr_pc_after_break (gdbarch, 2);
|
|
/* Stack grows downward. */
|
|
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
|
|
set_gdbarch_breakpoint_from_pc (gdbarch, s390_breakpoint_from_pc);
|
|
set_gdbarch_skip_prologue (gdbarch, s390_skip_prologue);
|
|
set_gdbarch_in_function_epilogue_p (gdbarch, s390_in_function_epilogue_p);
|
|
|
|
set_gdbarch_num_regs (gdbarch, S390_NUM_REGS);
|
|
set_gdbarch_sp_regnum (gdbarch, S390_SP_REGNUM);
|
|
set_gdbarch_fp0_regnum (gdbarch, S390_F0_REGNUM);
|
|
set_gdbarch_stab_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
|
|
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
|
|
set_gdbarch_value_from_register (gdbarch, s390_value_from_register);
|
|
set_gdbarch_regset_from_core_section (gdbarch,
|
|
s390_regset_from_core_section);
|
|
set_gdbarch_core_read_description (gdbarch, s390_core_read_description);
|
|
set_gdbarch_cannot_store_register (gdbarch, s390_cannot_store_register);
|
|
set_gdbarch_write_pc (gdbarch, s390_write_pc);
|
|
set_gdbarch_pseudo_register_read (gdbarch, s390_pseudo_register_read);
|
|
set_gdbarch_pseudo_register_write (gdbarch, s390_pseudo_register_write);
|
|
set_tdesc_pseudo_register_name (gdbarch, s390_pseudo_register_name);
|
|
set_tdesc_pseudo_register_type (gdbarch, s390_pseudo_register_type);
|
|
set_tdesc_pseudo_register_reggroup_p (gdbarch,
|
|
s390_pseudo_register_reggroup_p);
|
|
tdesc_use_registers (gdbarch, tdesc, tdesc_data);
|
|
|
|
/* Assign pseudo register numbers. */
|
|
first_pseudo_reg = gdbarch_num_regs (gdbarch);
|
|
last_pseudo_reg = first_pseudo_reg;
|
|
tdep->gpr_full_regnum = -1;
|
|
if (have_upper)
|
|
{
|
|
tdep->gpr_full_regnum = last_pseudo_reg;
|
|
last_pseudo_reg += 16;
|
|
}
|
|
tdep->pc_regnum = last_pseudo_reg++;
|
|
tdep->cc_regnum = last_pseudo_reg++;
|
|
set_gdbarch_pc_regnum (gdbarch, tdep->pc_regnum);
|
|
set_gdbarch_num_pseudo_regs (gdbarch, last_pseudo_reg - first_pseudo_reg);
|
|
|
|
/* Inferior function calls. */
|
|
set_gdbarch_push_dummy_call (gdbarch, s390_push_dummy_call);
|
|
set_gdbarch_dummy_id (gdbarch, s390_dummy_id);
|
|
set_gdbarch_frame_align (gdbarch, s390_frame_align);
|
|
set_gdbarch_return_value (gdbarch, s390_return_value);
|
|
|
|
/* Syscall handling. */
|
|
set_gdbarch_get_syscall_number (gdbarch, s390_linux_get_syscall_number);
|
|
|
|
/* Frame handling. */
|
|
dwarf2_frame_set_init_reg (gdbarch, s390_dwarf2_frame_init_reg);
|
|
dwarf2_frame_set_adjust_regnum (gdbarch, s390_adjust_frame_regnum);
|
|
dwarf2_append_unwinders (gdbarch);
|
|
frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer);
|
|
frame_unwind_append_unwinder (gdbarch, &s390_stub_frame_unwind);
|
|
frame_unwind_append_unwinder (gdbarch, &s390_sigtramp_frame_unwind);
|
|
frame_unwind_append_unwinder (gdbarch, &s390_frame_unwind);
|
|
frame_base_set_default (gdbarch, &s390_frame_base);
|
|
set_gdbarch_unwind_pc (gdbarch, s390_unwind_pc);
|
|
set_gdbarch_unwind_sp (gdbarch, s390_unwind_sp);
|
|
|
|
/* Displaced stepping. */
|
|
set_gdbarch_displaced_step_copy_insn (gdbarch,
|
|
simple_displaced_step_copy_insn);
|
|
set_gdbarch_displaced_step_fixup (gdbarch, s390_displaced_step_fixup);
|
|
set_gdbarch_displaced_step_free_closure (gdbarch,
|
|
simple_displaced_step_free_closure);
|
|
set_gdbarch_displaced_step_location (gdbarch,
|
|
displaced_step_at_entry_point);
|
|
set_gdbarch_max_insn_length (gdbarch, S390_MAX_INSTR_SIZE);
|
|
|
|
/* Note that GNU/Linux is the only OS supported on this
|
|
platform. */
|
|
linux_init_abi (info, gdbarch);
|
|
|
|
switch (tdep->abi)
|
|
{
|
|
case ABI_LINUX_S390:
|
|
tdep->gregset = &s390_gregset;
|
|
tdep->sizeof_gregset = s390_sizeof_gregset;
|
|
tdep->fpregset = &s390_fpregset;
|
|
tdep->sizeof_fpregset = s390_sizeof_fpregset;
|
|
|
|
set_gdbarch_addr_bits_remove (gdbarch, s390_addr_bits_remove);
|
|
set_solib_svr4_fetch_link_map_offsets
|
|
(gdbarch, svr4_ilp32_fetch_link_map_offsets);
|
|
|
|
set_xml_syscall_file_name (XML_SYSCALL_FILENAME_S390);
|
|
|
|
if (have_upper)
|
|
{
|
|
if (have_linux_v2)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux64v2_regset_sections);
|
|
else if (have_linux_v1)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux64v1_regset_sections);
|
|
else
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux64_regset_sections);
|
|
}
|
|
else
|
|
{
|
|
if (have_linux_v2)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux32v2_regset_sections);
|
|
else if (have_linux_v1)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux32v1_regset_sections);
|
|
else
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390_linux32_regset_sections);
|
|
}
|
|
break;
|
|
|
|
case ABI_LINUX_ZSERIES:
|
|
tdep->gregset = &s390x_gregset;
|
|
tdep->sizeof_gregset = s390x_sizeof_gregset;
|
|
tdep->fpregset = &s390_fpregset;
|
|
tdep->sizeof_fpregset = s390_sizeof_fpregset;
|
|
|
|
set_gdbarch_long_bit (gdbarch, 64);
|
|
set_gdbarch_long_long_bit (gdbarch, 64);
|
|
set_gdbarch_ptr_bit (gdbarch, 64);
|
|
set_solib_svr4_fetch_link_map_offsets
|
|
(gdbarch, svr4_lp64_fetch_link_map_offsets);
|
|
set_gdbarch_address_class_type_flags (gdbarch,
|
|
s390_address_class_type_flags);
|
|
set_gdbarch_address_class_type_flags_to_name (gdbarch,
|
|
s390_address_class_type_flags_to_name);
|
|
set_gdbarch_address_class_name_to_type_flags (gdbarch,
|
|
s390_address_class_name_to_type_flags);
|
|
|
|
set_xml_syscall_file_name (XML_SYSCALL_FILENAME_S390);
|
|
|
|
if (have_linux_v2)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390x_linux64v2_regset_sections);
|
|
else if (have_linux_v1)
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390x_linux64v1_regset_sections);
|
|
else
|
|
set_gdbarch_core_regset_sections (gdbarch,
|
|
s390x_linux64_regset_sections);
|
|
break;
|
|
}
|
|
|
|
set_gdbarch_print_insn (gdbarch, print_insn_s390);
|
|
|
|
set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
|
|
|
|
/* Enable TLS support. */
|
|
set_gdbarch_fetch_tls_load_module_address (gdbarch,
|
|
svr4_fetch_objfile_link_map);
|
|
|
|
set_gdbarch_get_siginfo_type (gdbarch, linux_get_siginfo_type);
|
|
|
|
/* SystemTap functions. */
|
|
set_gdbarch_stap_register_prefixes (gdbarch, stap_register_prefixes);
|
|
set_gdbarch_stap_register_indirection_prefixes (gdbarch,
|
|
stap_register_indirection_prefixes);
|
|
set_gdbarch_stap_register_indirection_suffixes (gdbarch,
|
|
stap_register_indirection_suffixes);
|
|
set_gdbarch_stap_is_single_operand (gdbarch, s390_stap_is_single_operand);
|
|
|
|
return gdbarch;
|
|
}
|
|
|
|
|
|
extern initialize_file_ftype _initialize_s390_tdep; /* -Wmissing-prototypes */
|
|
|
|
void
|
|
_initialize_s390_tdep (void)
|
|
{
|
|
/* Hook us into the gdbarch mechanism. */
|
|
register_gdbarch_init (bfd_arch_s390, s390_gdbarch_init);
|
|
|
|
/* Initialize the GNU/Linux target descriptions. */
|
|
initialize_tdesc_s390_linux32 ();
|
|
initialize_tdesc_s390_linux32v1 ();
|
|
initialize_tdesc_s390_linux32v2 ();
|
|
initialize_tdesc_s390_linux64 ();
|
|
initialize_tdesc_s390_linux64v1 ();
|
|
initialize_tdesc_s390_linux64v2 ();
|
|
initialize_tdesc_s390_te_linux64 ();
|
|
initialize_tdesc_s390x_linux64 ();
|
|
initialize_tdesc_s390x_linux64v1 ();
|
|
initialize_tdesc_s390x_linux64v2 ();
|
|
initialize_tdesc_s390x_te_linux64 ();
|
|
}
|