old-cross-binutils/gdb/doc/Makefile.in
Joseph Myers 89a34d1b2c gdb:
2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>

	* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
	* configure: Regenerate.
	* Makefile.in: Set datarootdir, docdir, htmldir, and pdfdir from
	configure substitutions.
	(FLAGS_TO_PASS): Add datarootdir, docdir, and htmldir.

gdb/doc:
2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in: Set pdfdir and htmldir from configure
	substitutions.
	* configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
	* configure: Regenerate.

readline:
2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in: Add html target.  Add dummy install-html and
	install-pdf targets.

sim:
2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in: Add dummy install-pdf, html, and
	install-html targets.
2009-04-17 17:44:05 +00:00

533 lines
16 KiB
Makefile

##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
##2007, 2008, 2009 Free Software Foundation, Inc.
# Makefile for GDB documentation.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
srcdir = @srcdir@
VPATH = @srcdir@
prefix = @prefix@
infodir = @infodir@
pdfdir = @pdfdir@
htmldir = @htmldir@
SHELL = @SHELL@
LN_S = @LN_S@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
# main GDB source directory
gdbdir = $(srcdir)/..
# where to find texinfo; GDB dist should include a recent one
TEXIDIR=${gdbdir}/../texinfo
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Note that texinfo 4.0's makeinfo --html can only generate a
# single file, which would be too large, so continue to use
# texi2html. -sts 2000-03-28
# Contrary to documentation, the current directory is not
# searched by texi2html, so specify it explicitly.
# -macro 2007-07-26
MAKEHTML = texi2html
MAKEHTMLFLAGS = -menu -split_chapter -I .
# where to find texi2roff, ditto
TEXI2ROFF=texi2roff
# where to find texi2dvi, ditto
TEXI2DVI=texi2dvi
# Package version and bug-reporting URL.
PKGVERSION = @PKGVERSION@
BUGURL_TEXI = @REPORT_BUGS_TEXI@
# Where is the source dir for the READLINE library doc?
# Traditionally readline is in .. or .
READLINE_DIR = ${gdbdir}/../readline/doc
# The GDB/MI docs come from a sibling directory ../mi
GDBMI_DIR = ${gdbdir}/mi
SET_TEXINPUTS = \
TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
# Files which should be generated via 'info' and installed by 'install-info'
INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
# Files which should be generated via 'pdf' and installed by 'install-pdf'
PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
# There may be alternate predefined collections of switches to configure
# the GDB manual. Normally this is not done in synch with the software
# config system, since this choice tends to be independent; most people
# want a doc config of `all' for a generic manual, regardless of sw config.
DOC_CONFIG = all
# This list of sed edits will edit the GDB reference card
# for what fonts and what papersize to use.
# By default (NO edits applied), the refcard uses:
# - Computer Modern (CM) fonts
# - US letter paper (8.5x11in)
# List some of the following files for alternative fonts and paper:
# a4rc.sed use A4 paper (297 x 210 mm)
# psrc.sed use PostScript fonts (Karl Berry short TeX names)
# lpsrc.sed use PostScript fonts (full PostScript names in TeX)
# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed
# for A4, CM fonts: REFEDITS = a4rc.sed
# for US, PS fonts: REFEDITS = psrc.sed
# for default:
REFEDITS =
# Don Knuth's TeX formatter
TEX = tex
PDFTEX = pdftex
# Program to generate Postscript files from DVI files.
DVIPS = dvips
# Main GDB manual
GDB_DOC_SOURCE_INCLUDES = \
$(srcdir)/fdl.texi \
$(srcdir)/gpl.texi \
$(srcdir)/agentexpr.texi \
$(READLINE_DIR)/rluser.texi \
$(READLINE_DIR)/inc-hist.texinfo
GDB_DOC_BUILD_INCLUDES = \
gdb-cfg.texi \
GDBvn.texi
GDB_DOC_FILES = \
$(srcdir)/gdb.texinfo \
$(GDB_DOC_SOURCE_INCLUDES) \
$(GDB_DOC_BUILD_INCLUDES)
# Internals Manual
GDBINT_DOC_SOURCE_INCLUDES = \
$(srcdir)/fdl.texi \
$(srcdir)/observer.texi
GDBINT_DOC_BUILD_INCLUDES = \
gdb-cfg.texi \
GDBvn.texi
GDBINT_DOC_FILES = \
$(srcdir)/gdbint.texinfo \
$(GDBINT_DOC_SOURCE_INCLUDES) \
$(GDBINT_DOC_BUILD_INCLUDES)
# Stabs manual: All files
STABS_DOC_SOURCE_INCLUDES = \
$(srcdir)/fdl.texi
STABS_DOC_BUILD_INCLUDES =
STABS_DOC_FILES = \
$(srcdir)/stabs.texinfo \
$(STABS_DOC_SOURCE_INCLUDES) \
$(STABS_DOC_BUILD_INCLUDES)
# Annotate migration document
ANNOTATE_DOC_SOURCE_INCLUDES = \
$(srcdir)/fdl.texi
ANNOTATE_DOC_BUILD_INCLUDES = \
gdb-cfg.texi
ANNOTATE_DOC_FILES = \
$(srcdir)/annotate.texinfo \
$(ANNOTATE_DOC_SOURCE_INCLUDES) \
$(ANNOTATE_DOC_BUILD_INCLUDES)
#### Host, target, and site specific Makefile fragments come in here.
###
all:
info: $(INFO_DEPS)
dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
pdf: $(PDFFILES)
all-doc: info dvi ps # pdf
diststuff: info
install-info: $(INFO_DEPS)
$(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
if test -f $$d/$$ifile; then \
echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
$(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
else : ; fi; \
done; \
done
$(POST_INSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
done; \
else : ; fi
uninstall-info:
$(PRE_UNINSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
ii=yes; \
else ii=; fi; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
test -z "$$ii" \
|| install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
done
$(NORMAL_UNINSTALL)
list='$(INFO_DEPS)'; \
for file in $$list; do \
(cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
done
install-html: html
for i in *.html ; do \
$(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
done
pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
install-pdf: $(PDFFILES)
@$(NORMAL_INSTALL)
test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
@list='$(PDFFILES)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(pdf__strip_dir) \
echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
done
STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
# Copy the object files from a particular stage into a subdirectory.
stage1: force
-mkdir stage1
-mv $(STAGESTUFF) stage1
stage2: force
-mkdir stage2
-mv $(STAGESTUFF) stage2
stage3: force
-mkdir stage3
-mv $(STAGESTUFF) stage3
against=stage2
comparison: force
for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
de-stage1: force
-(cd stage1 ; mv -f * ..)
-rmdir stage1
de-stage2: force
-(cd stage2 ; mv -f * ..)
-rmdir stage2
de-stage3: force
-(cd stage3 ; mv -f * ..)
-rmdir stage3
# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
echo > tmp.sed
for f in x $(REFEDITS) ; do \
test x$$f = xx && continue ; \
cat $(srcdir)/$$f >>tmp.sed ; \
done
sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
$(SET_TEXINPUTS) $(TEX) sedref.tex
mv sedref.dvi refcard.dvi
rm -f sedref.log sedref.tex tmp.sed
refcard.ps : refcard.dvi
$(DVIPS) -t landscape -o $@ $?
refcard.pdf : refcard.tex $(REFEDITS)
echo > tmp.sed
for f in x $(REFEDITS) ; do \
test x$$f = xx && continue ; \
cat $(srcdir)/$$f >>tmp.sed ; \
done
sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
$(SET_TEXINPUTS) $(PDFTEX) sedref.tex
mv sedref.pdf refcard.pdf
rm -f sedref.log sedref.tex tmp.sed
# File to record current GDB version number (copied from main dir version.in)
GDBvn.texi : ${gdbdir}/version.in
echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
if [ -n "$(PKGVERSION)" ]; then \
echo "@set VERSION_PACKAGE $(PKGVERSION)" >> ./GDBvn.new; \
fi
echo "@set BUGURL $(BUGURL_TEXI)" >> ./GDBvn.new
if [ "$(BUGURL_TEXI)" = "@uref{http://www.gnu.org/software/gdb/bugs/}" ]; then \
echo "@set BUGURL_DEFAULT" >> ./GDBvn.new; \
fi
mv GDBvn.new GDBvn.texi
# Updated atomically
.PRECIOUS: GDBvn.texi
# Choose configuration for GDB manual (normally `all'; normally not tied into
# `configure' script because most users prefer generic version of manual,
# not one for their binary config---which may not be specifically
# defined anyways).
gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
(test "$(LN_S)" = "ln -s" && \
ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
# If your texinfo or makeinfo don't support these, get a new texinfo release
#
# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
# Note that we can *generate* GDBvn.texi, but since we distribute one in the
# source directory for the benefit of people who *don't* use this makefile,
# VPATH will often tell make not to bother building it, because the one
# in the srcdir is up to date. (if not, then make should build one here).
# Clean these up before each run. Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
gdb.tp* gdb.vr*
# GDB MANUAL: TeX dvi file
gdb.dvi: ${GDB_DOC_FILES}
if [ ! -f ./GDBvn.texi ]; then \
(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
ln $(srcdir)/GDBvn.texi . || \
cp $(srcdir)/GDBvn.texi . ; else true; fi
rm -f $(GDB_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
gdb.ps: gdb.dvi
$(DVIPS) -o $@ $?
gdb.pdf: ${GDB_DOC_FILES}
if [ ! -f ./GDBvn.texi ]; then \
(test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
ln $(srcdir)/GDBvn.texi . || \
cp $(srcdir)/GDBvn.texi . ; else true; fi
rm -f $(GDB_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
# GDB MANUAL: info file
gdb.info: ${GDB_DOC_FILES}
$(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
-o gdb.info $(srcdir)/gdb.texinfo
# GDB MANUAL: roff translations
# Try to use a recent texi2roff. v2 was put on prep in jan91.
# If you want an index, see texi2roff doc for postprocessing
# and add -i to texi2roff invocations below.
# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
# corresponding -e lines when later texi2roff's are current)
# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
# + @c's deleted explicitly because texi2roff sees texinfo commands in them
# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank
# + @alphaenumerate is ridiculously new, turned into @enumerate
# texi2roff doesn't have a notion of include dirs, so we have to fake
# it out for gdb manual's include files---but only if not configured
# in main sourcedir.
links2roff: $(GDB_DOC_SOURCE_INCLUDES)
if [ ! -f gdb.texinfo ]; then \
(test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
ln $(GDB_DOC_SOURCE_INCLUDES) . || \
cp $(GDB_DOC_SOURCE_INCLUDES) . ; \
fi
touch links2roff
# gdb manual suitable for [gtn]roff -me
gdb.me: $(GDB_DOC_FILES) links2roff
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -me | \
sed -e 's/---/\\(em/g' \
>gdb.me
# gdb manual suitable for [gtn]roff -ms
gdb.ms: $(GDB_DOC_FILES) links2roff
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -ms | \
sed -e 's/---/\\(em/g' \
>gdb.ms
# gdb manual suitable for [tn]roff -mm
# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
# try leaving them in
gdb.mm: $(GDB_DOC_FILES) links2roff
sed -e '/\\input texinfo/d' \
-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-e '/^@ifinfo/,/^@end ifinfo/d' \
-e '/^@c /d' \
-e 's/{.*,,/{/' \
-e '/@noindent/d' \
-e 's/@ / /g' \
-e 's/^@alphaenumerate/@enumerate/g' \
-e 's/^@end alphaenumerate/@end enumerate/g' \
$(srcdir)/gdb.texinfo | \
$(TEXI2ROFF) -mm | \
sed -e 's/---/\\(em/g' \
>gdb.mm
# GDB MANUAL: HTML file
gdb_toc.html: ${GDB_DOC_FILES}
$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
# Clean these up before each run. Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
# GDB INTERNALS MANUAL: TeX dvi file
gdbint.dvi: $(GDBINT_DOC_FILES)
rm -f $(GDBINT_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
gdbint.ps : gdbint.dvi
$(DVIPS) -o $@ $?
gdbint.pdf: $(GDBINT_DOC_FILES)
rm -f $(GDBINT_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
# GDB INTERNALS MANUAL: info file
gdbint.info: $(GDBINT_DOC_FILES)
$(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
# GDB INTERNALS MANUAL: HTML file
gdbint_toc.html: $(GDBINT_DOC_FILES)
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
stabs.info: $(STABS_DOC_FILES)
$(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
# STABS DOCUMENTATION: HTML file
stabs_toc.html: $(STABS_DOC_FILES)
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
# Clean these up before each run. Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
# STABS DOCUMENTATION: TeX dvi file
stabs.dvi : $(STABS_DOC_FILES)
rm -f $(STABS_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
stabs.ps: stabs.dvi
$(DVIPS) -o $@ $?
stabs.pdf: $(STABS_DOC_FILES)
rm -f $(STABS_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
# Clean these up before each run. Avoids a catch 22 with not being
# able to re-generate these files (to fix a corruption) because these
# files contain a corruption.
ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
# ANNOTATE DOCUMENTATION: TeX dvi file
annotate.dvi : $(ANNOTATE_DOC_FILES)
rm -f $(ANNOTATE_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
annotate.ps: annotate.dvi
$(DVIPS) -o $@ $?
annotate.pdf: $(ANNOTATE_DOC_FILES)
rm -f $(ANNOTATE_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
annotate.info: $(ANNOTATE_DOC_FILES)
$(MAKEINFO) -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
annotate_toc.html: $(ANNOTATE_DOC_FILES)
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
force:
Makefile: Makefile.in $(host_makefile_frag) config.status
$(SHELL) ./config.status
# The "least clean" level of cleaning. Get rid of files which are
# automatically generated files that are just intermediate files,
mostlyclean:
rm -f gdb.mm gdb.ms gdb.me links2roff
rm -f $(GDB_TEX_TMPS)
rm -f $(GDBINT_TEX_TMPS)
rm -f $(STABS_TEX_TMPS)
rm -f $(ANNOTATE_TEX_TMPS)
rm -f sedref.dvi sedref.tex tmp.sed
clean: mostlyclean
rm -f gdb-cfg.texi
distclean: clean
rm -f Makefile config.status config.log
# GDBvn.texi, the dvi files, the info files, and the postscript files,
# are all part of the distribution, so it should not be removed by
# "clean" or "distclean". Use maintainer-clean to remove them.
maintainer-clean realclean: distclean
rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
install: install-info
uninstall: uninstall-info