old-cross-binutils/gdb/gdbserver/spu-low.c
Pedro Alves 3aee891821 [GDBserver] Multi-process + multi-arch
This patch makes GDBserver support multi-process + biarch.

Currently, if you're debugging more than one process at once with a
single gdbserver (in extended-remote mode), then all processes must
have the same architecture (e.g., 64-bit vs 32-bit).  Otherwise, you
see this:

Added inferior 2
[Switching to inferior 2 [<null>] (<noexec>)]
Reading symbols from /home/pedro/gdb/tests/main32...done.
Temporary breakpoint 2 at 0x4004cf: main. (2 locations)
Starting program: /home/pedro/gdb/tests/main32
warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64
warning: Architecture rejected target-supplied description
Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
... etc, etc ...

Even though the process was running a 32-bit program, GDBserver sent
back to GDB a register set in 64-bit layout.

A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a
while ago made GDB track a target_gdbarch per inferior, and as
consequence, fetch a target description per-inferior.  This patch is
the GDBserver counterpart, that makes GDBserver keep track of each
process'es XML target description and register layout.  So in the
example above, GDBserver will send the correct register set in 32-bit
layout to GDB.

A new "struct target_desc" object (tdesc for short) is added, that
holds the target description and register layout information about
each process.  Each `struct process_info' holds a pointer to a target
description.  The regcache also gains a pointer to a target
description, mainly for convenience, and parallel with GDB (and
possible future support for programs that flip processor modes).

The low target's arch_setup routines are responsible for setting the
process'es correct tdesc.  This isn't that much different to how
things were done before, except that instead of detecting the inferior
process'es architecture and calling the corresponding
init_registers_FOO routine, which would change the regcache layout
globals and recreate the threads' regcaches, the regcache.c globals
are gone, and the init_registers_$BAR routines now each initialize a
separate global struct target_desc object (one for each arch variant
GDBserver supports), and so all the init_registers_$BAR routines that
are built into GDBserver are called early at GDBserver startup time
(similarly to how GDB handles its built-in target descriptions), and
then the arch_setup routine is responsible for making
process_info->tdesc point to one of these target description globals.
The regcache module is all parameterized to get the regcache's layout
from the tdesc object instead of the old register_bytes, etc. globals.

The threads' regcaches are now created lazily.  The old scheme where
we created each of them when we added a new thread doesn't work
anymore, because we add the main thread/lwp before we see it stop for
the first time, and it is only when we see the thread stop for the
first time that we have a chance of determining the inferior's
architecture (through the_low_target.arch_setup).  Therefore when we
add the main thread we don't know which architecture/tdesc its
regcache should have.

This patch makes the gdb.multi/multi-arch.exp test now pass against
(extended-remote) GDBserver.  It currently fails, without this patch.

The IPA also uses the regcache, so it gains a new global struct
target_desc pointer, which points at the description of the process it
is loaded in.

Re. the linux-low.c & friends changes.  Since the register map
etc. may differ between processes (64-bit vs 32-bit) etc., the
linux_target_ops num_regs, regmap and regset_bitmap data fields are no
longer sufficient.  A new method is added in their place that returns
a pointer to a new struct that includes all info linux-low.c needs to
access registers of the current inferior.

The patch/discussion that originally introduced
linux-low.c:disabled_regsets mentions that the disabled_regsets set
may be different per mode (in a biarch setup), and indeed that is
cleared whenever we start a new (first) inferior, so that global is
moved as well behind the new `struct regs_info'.

On the x86 side:

I simply replaced the i387-fp.c:num_xmm_registers global with a check
for 64-bit or 32-bit process, which is equivalent to how the global
was set.  This avoided coming up with some more general mechanism that
would work for all targets that use this module (GNU/Linux, Windows,
etc.).

Tested:

  GNU/Linux IA64
  GNU/Linux MIPS64
  GNU/Linux PowerPC (Fedora 16)
  GNU/Linux s390x (Fedora 16)
  GNU/Linux sparc64 (Debian)
  GNU/Linux x86_64, -m64 and -m32 (Fedora 17)

Cross built, and smoke tested:

  i686-w64-mingw32, under Wine.
  GNU/Linux TI C6x, by Yao Qi.

Cross built but otherwise not tested:

  aarch64-linux-gnu
  arm-linux-gnu
  m68k-linux
  nios2-linux-gnu
  sh-linux-gnu
  spu
  tilegx-unknown-linux-gnu

Completely untested:

  GNU/Linux Blackfin
  GNU/Linux CRIS
  GNU/Linux CRISv32
  GNU/Linux TI Xtensa
  GNU/Linux M32R
  LynxOS
  QNX NTO

gdb/gdbserver/
2013-06-07  Pedro Alves  <palves@redhat.com>

	* Makefile.in (OBS): Add tdesc.o.
	(IPA_OBJS): Add tdesc-ipa.o.
	(tdesc-ipa.o): New rule.
	* ax.c (gdb_eval_agent_expr): Adjust register_size call to new
	interface.
	* linux-low.c (new_inferior): Delete.
	(disabled_regsets, num_regsets): Delete.
	(linux_add_process): Adjust to set the new per-process
	new_inferior flag.
	(linux_detach_one_lwp): Adjust to call regcache_invalidate_thread.
	(linux_wait_for_lwp): Adjust.  Only call arch_setup if the event
	was a stop.  When calling arch_setup, switch the current inferior
	to the thread that got an event.
	(linux_resume_one_lwp): Adjust to call regcache_invalidate_thread.
	(regsets_fetch_inferior_registers)
	(regsets_store_inferior_registers): New regsets_info parameter.
	Adjust to use it.
	(linux_register_in_regsets): New regs_info parameter.  Adjust to
	use it.
	(register_addr, fetch_register, store_register): New usrregs_info
	parameter.  Adjust to use it.
	(usr_fetch_inferior_registers, usr_store_inferior_registers): New
	parameter regs_info.  Adjust to use it.
	(linux_fetch_registers): Get the current inferior's regs_info, and
	adjust to use it.
	(linux_store_registers): Ditto.
	[HAVE_LINUX_REGSETS] (initialize_regsets_info): New.
	(initialize_low): Don't initialize the target_regsets here.  Call
	initialize_low_arch.
	* linux-low.h (target_regsets): Delete declaration.
	(struct regsets_info): New.
	(struct usrregs_info): New.
	(struct regs_info): New.
	(struct process_info_private) <new_inferior>: New field.
	(struct linux_target_ops): Delete the num_regs, regmap, and
	regset_bitmap fields.  New field regs_info.
	[HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare.
	* i387-fp.c (num_xmm_registers): Delete.
	(i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno
	calls to new interface.
	(i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache)
	(i387_xsave_to_cache): Adjust find_regno calls to new interface.
	Infer the number of xmm registers from the regcache's target
	description.
	* i387-fp.h (num_xmm_registers): Delete.
	* inferiors.c (add_thread): Don't install the thread's regcache
	here.
	* proc-service.c (gregset_info): Fetch the current inferior's
	regs_info.  Adjust to use it.
	* regcache.c: Include tdesc.h.
	(register_bytes, reg_defs, num_registers)
	(gdbserver_expedite_regs): Delete.
	(get_thread_regcache): If the thread doesn't have a regcache yet,
	create one, instead of aborting gdbserver.
	(regcache_invalidate_one): Rename to ...
	(regcache_invalidate_thread): ... this.
	(regcache_invalidate_one): New.
	(regcache_invalidate): Only invalidate registers of the current
	process.
	(init_register_cache): Add target_desc parameter, and use it.
	(new_register_cache): Ditto.  Assert the target description has a
	non zero registers_size.
	(regcache_cpy): Add assertions.  Adjust.
	(realloc_register_cache, set_register_cache): Delete.
	(registers_to_string, registers_from_string): Adjust.
	(find_register_by_name, find_regno, find_register_by_number)
	(register_cache_size): Add target_desc parameter, and use it.
	(free_register_cache_thread, free_register_cache_thread_one)
	(regcache_release, register_cache_size): New.
	(register_size): Add target_desc parameter, and use it.
	(register_data, supply_register, supply_register_zeroed)
	(supply_regblock, supply_register_by_name, collect_register)
	(collect_register_as_string, collect_register_by_name): Adjust.
	* regcache.h (struct target_desc): Forward declare.
	(struct regcache) <tdesc>: New field.
	(init_register_cache, new_register_cache): Add target_desc
	parameter.
	(regcache_invalidate_thread): Declare.
	(regcache_invalidate_one): Delete declaration.
	(regcache_release): Declare.
	(find_register_by_number, register_cache_size, register_size)
	(find_regno): Add target_desc parameter.
	(gdbserver_expedite_regs, gdbserver_xmltarget): Delete
	declarations.
	* remote-utils.c: Include tdesc.h.
	(outreg, prepare_resume_reply): Adjust.
	* server.c: Include tdesc.h.
	(gdbserver_xmltarget): Delete declaration.
	(get_features_xml, process_serial_event): Adjust.
	* server.h [IN_PROCESS_AGENT] (struct target_desc): Forward
	declare.
	(struct process_info) <tdesc>: New field.
	(ipa_tdesc): Declare.
	* tdesc.c: New file.
	* tdesc.h: New file.
	* tracepoint.c: Include tdesc.h.
	[IN_PROCESS_AGENT] (ipa_tdesc): Define.
	(get_context_regcache): Adjust to pass ipa_tdesc down.
	(do_action_at_tracepoint): Adjust to get the register cache size
	from the context regcache's description.
	(traceframe_walk_blocks): Adjust to get the register cache size
	from the current trace frame's description.
	(traceframe_get_pc): Adjust to get current trace frame's
	description and pass it down.
	(gdb_collect): Adjust to get the register cache size from the
	IPA's description.
	* linux-amd64-ipa.c (tdesc_amd64_linux): Declare.
	(gdbserver_xmltarget): Delete.
	(initialize_low_tracepoint): Set the ipa's target description.
	* linux-i386-ipa.c (tdesc_i386_linux): Declare.
	(initialize_low_tracepoint): Set the ipa's target description.
	* linux-x86-low.c: Include tdesc.h.
	[__x86_64__] (is_64bit_tdesc): New.
	(ps_get_thread_area, x86_get_thread_area): Use it.
	(i386_cannot_store_register): Rename to ...
	(x86_cannot_store_register): ... this.  Use is_64bit_tdesc.
	(i386_cannot_fetch_register): Rename to ...
	(x86_cannot_fetch_register): ... this.  Use is_64bit_tdesc.
	(x86_fill_gregset, x86_store_gregset): Adjust register_size calls
	to new interface.
	(target_regsets): Rename to ...
	(x86_regsets): ... this.
	(x86_get_pc, x86_set_pc): Adjust register_size calls to new
	interface.
	(x86_siginfo_fixup): Use is_64bit_tdesc.
	[__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux)
	(tdesc_x32_avx_linux, tdesc_x32_linux)
	(tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux):
	Declare.
	(x86_linux_update_xmltarget): Delete.
	(I386_LINUX_XSAVE_XCR0_OFFSET): Define.
	(have_ptrace_getfpxregs, have_ptrace_getregset): New.
	(AMD64_LINUX_USER64_CS): New.
	(x86_linux_read_description): New, based on
	x86_linux_update_xmltarget.
	(same_process_callback): New.
	(x86_arch_setup_process_callback): New.
	(x86_linux_update_xmltarget): New.
	(x86_regsets_info): New.
	(amd64_linux_regs_info): New.
	(i386_linux_usrregs_info): New.
	(i386_linux_regs_info): New.
	(x86_linux_regs_info): New.
	(x86_arch_setup): Reimplement.
	(x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc.
	(x86_emit_ops): Ditto.
	(the_low_target): Adjust.  Install x86_linux_regs_info,
	x86_cannot_fetch_register, and x86_cannot_store_register.
	(initialize_low_arch): New.
	* linux-ia64-low.c (tdesc_ia64): Declare.
	(ia64_fetch_register): Adjust.
	(ia64_usrregs_info, regs_info): New globals.
	(ia64_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-sparc-low.c (tdesc_sparc64): Declare.
	(sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack):
	Adjust.
	(sparc_arch_setup): New function.
	(sparc_regsets_info, sparc_usrregs_info, regs_info): New globals.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l)
	(tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l)
	(tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l)
	(tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l)
	(tdesc_powerpc_64l, tdesc_powerpc_altivec64l)
	(tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l)
	(tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l)
	(tdesc_powerpc_isa205_vsx64l): Declare.
	(ppc_cannot_store_register, ppc_collect_ptrace_register)
	(ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc)
	(ppc_set_pc, ppc_get_hwcap): Adjust.
	(ppc_usrregs_info): Forward declare.
	(!__powerpc64__) ppc_regmap_adjusted: New global.
	(ppc_arch_setup): Adjust to the current process'es target
	description.
	(ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset)
	(ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse)
	(ppc_store_evrregset): Adjust.
	(target_regsets): Rename to ...
	(ppc_regsets): ... this, and make static.
	(ppc_usrregs_info, ppc_regsets_info, regs_info): New globals.
	(ppc_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1)
	(tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1)
	(tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1)
	(tdesc_s390x_linux64v2): Declare.
	(s390_collect_ptrace_register, s390_supply_ptrace_register)
	(s390_fill_gregset, s390_store_last_break): Adjust.
	(target_regsets): Rename to ...
	(s390_regsets): ... this, and make static.
	(s390_get_pc, s390_set_pc): Adjust.
	(s390_get_hwcap): New target_desc parameter, and use it.
	[__s390x__] (have_hwcap_s390_high_gprs): New global.
	(s390_arch_setup): Adjust to set the current process'es target
	description.  Don't adjust the regmap.
	(s390_usrregs_info, s390_regsets_info, regs_info): New globals.
	[__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264)
	(regs_info_3264): New globals.
	(s390_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux)
	(tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare.
	[__mips64] (init_registers_mips_linux)
	(init_registers_mips_dsp_linux): Delete defines.
	[__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines.
	(have_dsp): New global.
	(mips_read_description): New, based on mips_arch_setup.
	(mips_arch_setup): Reimplement.
	(get_usrregs_info): New function.
	(mips_cannot_fetch_register, mips_cannot_store_register)
	(mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset)
	(mips_fill_fpregset, mips_store_fpregset): Adjust.
	(target_regsets): Rename to ...
	(mips_regsets): ... this, and make static.
	(mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info)
	(dsp_regs_info, regs_info): New globals.
	(mips_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt)
	(tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon):
	Declare.
	(arm_fill_vfpregset, arm_store_vfpregset): Adjust.
	(arm_read_description): New, with bits factored from
	arm_arch_setup.
	(arm_arch_setup): Reimplement.
	(target_regsets): Rename to ...
	(arm_regsets): ... this, and make static.
	(arm_regsets_info, arm_usrregs_info, regs_info): New globals.
	(arm_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-m68k-low.c (tdesc_m68k): Declare.
	(target_regsets): Rename to ...
	(m68k_regsets): ... this, and make static.
	(m68k_regsets_info, m68k_usrregs_info, regs_info): New globals.
	(m68k_regs_info): New function.
	(m68k_arch_setup): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-sh-low.c (tdesc_sharch): Declare.
	(target_regsets): Rename to ...
	(sh_regsets): ... this, and make static.
	(sh_regsets_info, sh_usrregs_info, regs_info): New globals.
	(sh_regs_info, sh_arch_setup): New functions.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-bfin-low.c (tdesc_bfin): Declare.
	(bfin_arch_setup): New function.
	(bfin_usrregs_info, regs_info): New globals.
	(bfin_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-cris-low.c (tdesc_cris): Declare.
	(cris_arch_setup): New function.
	(cris_usrregs_info, regs_info): New globals.
	(cris_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-cris-low.c (tdesc_crisv32): Declare.
	(cris_arch_setup): New function.
	(cris_regsets_info, cris_usrregs_info, regs_info): New globals.
	(cris_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-m32r-low.c (tdesc_m32r): Declare.
	(m32r_arch_setup): New function.
	(m32r_usrregs_info, regs_info): New globals.
	(m32r_regs_info): Adjust.
	(initialize_low_arch): New function.
	* linux-tic6x-low.c (tdesc_tic6x_c64xp_linux)
	(tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare.
	(tic6x_usrregs_info): Forward declare.
	(tic6x_read_description): New function, based on ...
	(tic6x_arch_setup): ... this.  Reimplement.
	(target_regsets): Rename to ...
	(tic6x_regsets): ... this, and make static.
	(tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals.
	(tic6x_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-xtensa-low.c (tdesc_xtensa): Declare.
	(xtensa_fill_gregset, xtensa_store_gregset): Adjust.
	(target_regsets): Rename to ...
	(xtensa_regsets): ... this, and make static.
	(xtensa_regsets_info, xtensa_usrregs_info, regs_info): New
	globals.
	(xtensa_arch_setup, xtensa_regs_info): New functions.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* linux-nios2-low.c (tdesc_nios2_linux): Declare.
	(nios2_arch_setup): Set the current process'es tdesc.
	(target_regsets): Rename to ...
	(nios2_regsets): ... this.
	(nios2_regsets_info, nios2_usrregs_info, regs_info): New globals.
	(nios2_regs_info): New function.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
        * linux-aarch64-low.c (tdesc_aarch64): Declare.
        (aarch64_arch_setup): Set the current process'es tdesc.
        (target_regsets): Rename to ...
        (aarch64_regsets): ... this.
        (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals.
        (aarch64_regs_info): New function.
        (the_low_target): Adjust.
        (initialize_low_arch): New function.
	* linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare
	globals.
	(target_regsets): Rename to ...
	(tile_regsets): ... this.
	(tile_regsets_info, tile_usrregs_info, regs_info): New globals.
	(tile_regs_info): New function.
	(tile_arch_setup): Set the current process'es tdesc.
	(the_low_target): Adjust.
	(initialize_low_arch): New function.
	* spu-low.c (tdesc_spu): Declare.
	(spu_create_inferior, spu_attach): Set the new process'es tdesc.
	* win32-arm-low.c (tdesc_arm): Declare.
	(arm_arch_setup): New function.
	(the_low_target): Install arm_arch_setup instead of
	init_registers_arm.
	* win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare.
	(init_windows_x86): Rename to ...
	(i386_arch_setup): ... this.  Set `win32_tdesc'.
	(the_low_target): Adjust.
	* win32-low.c (win32_tdesc): New global.
	(child_add_thread): Don't create the thread cache here.
	(do_initial_child_stuff): Set the new process'es tdesc.
	* win32-low.h (struct target_desc): Forward declare.
	(win32_tdesc): Declare.
	* lynx-i386-low.c (tdesc_i386): Declare global.
	(lynx_i386_arch_setup): Set `lynx_tdesc'.
	* lynx-low.c (lynx_tdesc): New global.
	(lynx_add_process): Set the new process'es tdesc.
	* lynx-low.h (struct target_desc): Forward declare.
	(lynx_tdesc): Declare global.
	* lynx-ppc-low.c (tdesc_powerpc_32): Declare global.
	(lynx_ppc_arch_setup): Set `lynx_tdesc'.
	* nto-low.c (nto_tdesc): New global.
	(do_attach): Set the new process'es tdesc.
	* nto-low.h (struct target_desc): Forward declare.
	(nto_tdesc): Declare.
	* nto-x86-low.c (tdesc_i386): Declare.
	(nto_x86_arch_setup): Set `nto_tdesc'.

gdb/
2013-06-07  Pedro Alves  <palves@redhat.com>

	* regformats/regdat.sh: Output #include tdesc.h.  Make globals
	static.  Output a global target description pointer.
	(init_registers_${name}): Adjust to initialize a
	target description structure.
2013-06-07 10:46:59 +00:00

677 lines
17 KiB
C

/* Low level interface to SPUs, for the remote server for GDB.
Copyright (C) 2006-2013 Free Software Foundation, Inc.
Contributed by Ulrich Weigand <uweigand@de.ibm.com>.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "server.h"
#include "gdb_wait.h"
#include <stdio.h>
#include <sys/ptrace.h>
#include <fcntl.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#include <sys/syscall.h>
/* Some older glibc versions do not define this. */
#ifndef __WNOTHREAD
#define __WNOTHREAD 0x20000000 /* Don't wait on children of other
threads in this group */
#endif
#define PTRACE_TYPE_RET long
#define PTRACE_TYPE_ARG3 long
/* Number of registers. */
#define SPU_NUM_REGS 130
#define SPU_NUM_CORE_REGS 128
/* Special registers. */
#define SPU_ID_REGNUM 128
#define SPU_PC_REGNUM 129
/* PPU side system calls. */
#define INSTR_SC 0x44000002
#define NR_spu_run 0x0116
/* These are used in remote-utils.c. */
int using_threads = 0;
/* Defined in auto-generated file reg-spu.c. */
void init_registers_spu (void);
extern const struct target_desc *tdesc_spu;
/* Fetch PPU register REGNO. */
static CORE_ADDR
fetch_ppc_register (int regno)
{
PTRACE_TYPE_RET res;
int tid = ptid_get_lwp (current_ptid);
#ifndef __powerpc64__
/* If running as a 32-bit process on a 64-bit system, we attempt
to get the full 64-bit register content of the target process.
If the PPC special ptrace call fails, we're on a 32-bit system;
just fall through to the regular ptrace call in that case. */
{
char buf[8];
errno = 0;
ptrace (PPC_PTRACE_PEEKUSR_3264, tid,
(PTRACE_TYPE_ARG3) (regno * 8), buf);
if (errno == 0)
ptrace (PPC_PTRACE_PEEKUSR_3264, tid,
(PTRACE_TYPE_ARG3) (regno * 8 + 4), buf + 4);
if (errno == 0)
return (CORE_ADDR) *(unsigned long long *)buf;
}
#endif
errno = 0;
res = ptrace (PT_READ_U, tid,
(PTRACE_TYPE_ARG3) (regno * sizeof (PTRACE_TYPE_RET)), 0);
if (errno != 0)
{
char mess[128];
sprintf (mess, "reading PPC register #%d", regno);
perror_with_name (mess);
}
return (CORE_ADDR) (unsigned long) res;
}
/* Fetch WORD from PPU memory at (aligned) MEMADDR in thread TID. */
static int
fetch_ppc_memory_1 (int tid, CORE_ADDR memaddr, PTRACE_TYPE_RET *word)
{
errno = 0;
#ifndef __powerpc64__
if (memaddr >> 32)
{
unsigned long long addr_8 = (unsigned long long) memaddr;
ptrace (PPC_PTRACE_PEEKTEXT_3264, tid, (PTRACE_TYPE_ARG3) &addr_8, word);
}
else
#endif
*word = ptrace (PT_READ_I, tid, (PTRACE_TYPE_ARG3) (size_t) memaddr, 0);
return errno;
}
/* Store WORD into PPU memory at (aligned) MEMADDR in thread TID. */
static int
store_ppc_memory_1 (int tid, CORE_ADDR memaddr, PTRACE_TYPE_RET word)
{
errno = 0;
#ifndef __powerpc64__
if (memaddr >> 32)
{
unsigned long long addr_8 = (unsigned long long) memaddr;
ptrace (PPC_PTRACE_POKEDATA_3264, tid, (PTRACE_TYPE_ARG3) &addr_8, word);
}
else
#endif
ptrace (PT_WRITE_D, tid, (PTRACE_TYPE_ARG3) (size_t) memaddr, word);
return errno;
}
/* Fetch LEN bytes of PPU memory at MEMADDR to MYADDR. */
static int
fetch_ppc_memory (CORE_ADDR memaddr, char *myaddr, int len)
{
int i, ret;
CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET);
int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1)
/ sizeof (PTRACE_TYPE_RET));
PTRACE_TYPE_RET *buffer;
int tid = ptid_get_lwp (current_ptid);
buffer = (PTRACE_TYPE_RET *) alloca (count * sizeof (PTRACE_TYPE_RET));
for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
if ((ret = fetch_ppc_memory_1 (tid, addr, &buffer[i])) != 0)
return ret;
memcpy (myaddr,
(char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
len);
return 0;
}
/* Store LEN bytes from MYADDR to PPU memory at MEMADDR. */
static int
store_ppc_memory (CORE_ADDR memaddr, char *myaddr, int len)
{
int i, ret;
CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET);
int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1)
/ sizeof (PTRACE_TYPE_RET));
PTRACE_TYPE_RET *buffer;
int tid = ptid_get_lwp (current_ptid);
buffer = (PTRACE_TYPE_RET *) alloca (count * sizeof (PTRACE_TYPE_RET));
if (addr != memaddr || len < (int) sizeof (PTRACE_TYPE_RET))
if ((ret = fetch_ppc_memory_1 (tid, addr, &buffer[0])) != 0)
return ret;
if (count > 1)
if ((ret = fetch_ppc_memory_1 (tid, addr + (count - 1)
* sizeof (PTRACE_TYPE_RET),
&buffer[count - 1])) != 0)
return ret;
memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
myaddr, len);
for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
if ((ret = store_ppc_memory_1 (tid, addr, buffer[i])) != 0)
return ret;
return 0;
}
/* If the PPU thread is currently stopped on a spu_run system call,
return to FD and ADDR the file handle and NPC parameter address
used with the system call. Return non-zero if successful. */
static int
parse_spufs_run (int *fd, CORE_ADDR *addr)
{
unsigned int insn;
CORE_ADDR pc = fetch_ppc_register (32); /* nip */
/* Fetch instruction preceding current NIP. */
if (fetch_ppc_memory (pc-4, (char *) &insn, 4) != 0)
return 0;
/* It should be a "sc" instruction. */
if (insn != INSTR_SC)
return 0;
/* System call number should be NR_spu_run. */
if (fetch_ppc_register (0) != NR_spu_run)
return 0;
/* Register 3 contains fd, register 4 the NPC param pointer. */
*fd = fetch_ppc_register (34); /* orig_gpr3 */
*addr = fetch_ppc_register (4);
return 1;
}
/* Copy LEN bytes at OFFSET in spufs file ANNEX into/from READBUF or WRITEBUF,
using the /proc file system. */
static int
spu_proc_xfer_spu (const char *annex, unsigned char *readbuf,
const unsigned char *writebuf,
CORE_ADDR offset, int len)
{
char buf[128];
int fd = 0;
int ret = -1;
if (!annex)
return 0;
sprintf (buf, "/proc/%ld/fd/%s", ptid_get_lwp (current_ptid), annex);
fd = open (buf, writebuf? O_WRONLY : O_RDONLY);
if (fd <= 0)
return -1;
if (offset != 0
&& lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
{
close (fd);
return 0;
}
if (writebuf)
ret = write (fd, writebuf, (size_t) len);
else if (readbuf)
ret = read (fd, readbuf, (size_t) len);
close (fd);
return ret;
}
/* Start an inferior process and returns its pid.
ALLARGS is a vector of program-name and args. */
static int
spu_create_inferior (char *program, char **allargs)
{
int pid;
ptid_t ptid;
struct process_info *proc;
pid = fork ();
if (pid < 0)
perror_with_name ("fork");
if (pid == 0)
{
ptrace (PTRACE_TRACEME, 0, 0, 0);
setpgid (0, 0);
execv (program, allargs);
if (errno == ENOENT)
execvp (program, allargs);
fprintf (stderr, "Cannot exec %s: %s.\n", program,
strerror (errno));
fflush (stderr);
_exit (0177);
}
proc = add_process (pid, 0);
proc->tdesc = tdesc_spu;
ptid = ptid_build (pid, pid, 0);
add_thread (ptid, NULL);
return pid;
}
/* Attach to an inferior process. */
int
spu_attach (unsigned long pid)
{
ptid_t ptid;
struct process_info *proc;
if (ptrace (PTRACE_ATTACH, pid, 0, 0) != 0)
{
fprintf (stderr, "Cannot attach to process %ld: %s (%d)\n", pid,
strerror (errno), errno);
fflush (stderr);
_exit (0177);
}
proc = add_process (pid, 1);
proc->tdesc = tdesc_spu;
ptid = ptid_build (pid, pid, 0);
add_thread (ptid, NULL);
return 0;
}
/* Kill the inferior process. */
static int
spu_kill (int pid)
{
int status, ret;
struct process_info *process = find_process_pid (pid);
if (process == NULL)
return -1;
ptrace (PTRACE_KILL, pid, 0, 0);
do {
ret = waitpid (pid, &status, 0);
if (WIFEXITED (status) || WIFSIGNALED (status))
break;
} while (ret != -1 || errno != ECHILD);
clear_inferiors ();
remove_process (process);
return 0;
}
/* Detach from inferior process. */
static int
spu_detach (int pid)
{
struct process_info *process = find_process_pid (pid);
if (process == NULL)
return -1;
ptrace (PTRACE_DETACH, pid, 0, 0);
clear_inferiors ();
remove_process (process);
return 0;
}
static void
spu_mourn (struct process_info *process)
{
remove_process (process);
}
static void
spu_join (int pid)
{
int status, ret;
do {
ret = waitpid (pid, &status, 0);
if (WIFEXITED (status) || WIFSIGNALED (status))
break;
} while (ret != -1 || errno != ECHILD);
}
/* Return nonzero if the given thread is still alive. */
static int
spu_thread_alive (ptid_t ptid)
{
return ptid_equal (ptid, current_ptid);
}
/* Resume process. */
static void
spu_resume (struct thread_resume *resume_info, size_t n)
{
size_t i;
for (i = 0; i < n; i++)
if (ptid_equal (resume_info[i].thread, minus_one_ptid)
|| ptid_equal (resume_info[i].thread, current_ptid))
break;
if (i == n)
return;
/* We don't support hardware single-stepping right now, assume
GDB knows to use software single-stepping. */
if (resume_info[i].kind == resume_step)
fprintf (stderr, "Hardware single-step not supported.\n");
regcache_invalidate ();
errno = 0;
ptrace (PTRACE_CONT, ptid_get_lwp (current_ptid), 0, resume_info[i].sig);
if (errno)
perror_with_name ("ptrace");
}
/* Wait for process, returns status. */
static ptid_t
spu_wait (ptid_t ptid, struct target_waitstatus *ourstatus, int options)
{
int pid = ptid_get_pid (ptid);
int w;
int ret;
while (1)
{
ret = waitpid (pid, &w, WNOHANG | __WALL | __WNOTHREAD);
if (ret == -1)
{
if (errno != ECHILD)
perror_with_name ("waitpid");
}
else if (ret > 0)
break;
usleep (1000);
}
/* On the first wait, continue running the inferior until we are
blocked inside an spu_run system call. */
if (!server_waiting)
{
int fd;
CORE_ADDR addr;
while (!parse_spufs_run (&fd, &addr))
{
ptrace (PT_SYSCALL, pid, (PTRACE_TYPE_ARG3) 0, 0);
waitpid (pid, NULL, __WALL | __WNOTHREAD);
}
}
if (WIFEXITED (w))
{
fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
ourstatus->kind = TARGET_WAITKIND_EXITED;
ourstatus->value.integer = WEXITSTATUS (w);
clear_inferiors ();
return pid_to_ptid (ret);
}
else if (!WIFSTOPPED (w))
{
fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
ourstatus->value.sig = gdb_signal_from_host (WTERMSIG (w));
clear_inferiors ();
return pid_to_ptid (ret);
}
/* After attach, we may have received a SIGSTOP. Do not return this
as signal to GDB, or else it will try to continue with SIGSTOP ... */
if (!server_waiting)
{
ourstatus->kind = TARGET_WAITKIND_STOPPED;
ourstatus->value.sig = GDB_SIGNAL_0;
return ptid_build (ret, ret, 0);
}
ourstatus->kind = TARGET_WAITKIND_STOPPED;
ourstatus->value.sig = gdb_signal_from_host (WSTOPSIG (w));
return ptid_build (ret, ret, 0);
}
/* Fetch inferior registers. */
static void
spu_fetch_registers (struct regcache *regcache, int regno)
{
int fd;
CORE_ADDR addr;
/* We must be stopped on a spu_run system call. */
if (!parse_spufs_run (&fd, &addr))
return;
/* The ID register holds the spufs file handle. */
if (regno == -1 || regno == SPU_ID_REGNUM)
supply_register (regcache, SPU_ID_REGNUM, (char *)&fd);
/* The NPC register is found at ADDR. */
if (regno == -1 || regno == SPU_PC_REGNUM)
{
char buf[4];
if (fetch_ppc_memory (addr, buf, 4) == 0)
supply_register (regcache, SPU_PC_REGNUM, buf);
}
/* The GPRs are found in the "regs" spufs file. */
if (regno == -1 || (regno >= 0 && regno < SPU_NUM_CORE_REGS))
{
unsigned char buf[16*SPU_NUM_CORE_REGS];
char annex[32];
int i;
sprintf (annex, "%d/regs", fd);
if (spu_proc_xfer_spu (annex, buf, NULL, 0, sizeof buf) == sizeof buf)
for (i = 0; i < SPU_NUM_CORE_REGS; i++)
supply_register (regcache, i, buf + i*16);
}
}
/* Store inferior registers. */
static void
spu_store_registers (struct regcache *regcache, int regno)
{
int fd;
CORE_ADDR addr;
/* ??? Some callers use 0 to mean all registers. */
if (regno == 0)
regno = -1;
/* We must be stopped on a spu_run system call. */
if (!parse_spufs_run (&fd, &addr))
return;
/* The NPC register is found at ADDR. */
if (regno == -1 || regno == SPU_PC_REGNUM)
{
char buf[4];
collect_register (regcache, SPU_PC_REGNUM, buf);
store_ppc_memory (addr, buf, 4);
}
/* The GPRs are found in the "regs" spufs file. */
if (regno == -1 || (regno >= 0 && regno < SPU_NUM_CORE_REGS))
{
unsigned char buf[16*SPU_NUM_CORE_REGS];
char annex[32];
int i;
for (i = 0; i < SPU_NUM_CORE_REGS; i++)
collect_register (regcache, i, buf + i*16);
sprintf (annex, "%d/regs", fd);
spu_proc_xfer_spu (annex, NULL, buf, 0, sizeof buf);
}
}
/* Copy LEN bytes from inferior's memory starting at MEMADDR
to debugger memory starting at MYADDR. */
static int
spu_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len)
{
int fd, ret;
CORE_ADDR addr;
char annex[32], lslr_annex[32], buf[32];
CORE_ADDR lslr;
/* We must be stopped on a spu_run system call. */
if (!parse_spufs_run (&fd, &addr))
return 0;
/* Use the "mem" spufs file to access SPU local store. */
sprintf (annex, "%d/mem", fd);
ret = spu_proc_xfer_spu (annex, myaddr, NULL, memaddr, len);
if (ret > 0)
return ret == len ? 0 : EIO;
/* SPU local store access wraps the address around at the
local store limit. We emulate this here. To avoid needing
an extra access to retrieve the LSLR, we only do that after
trying the original address first, and getting end-of-file. */
sprintf (lslr_annex, "%d/lslr", fd);
memset (buf, 0, sizeof buf);
if (spu_proc_xfer_spu (lslr_annex, (unsigned char *)buf, NULL,
0, sizeof buf) <= 0)
return ret;
lslr = strtoul (buf, NULL, 16);
ret = spu_proc_xfer_spu (annex, myaddr, NULL, memaddr & lslr, len);
return ret == len ? 0 : EIO;
}
/* Copy LEN bytes of data from debugger memory at MYADDR
to inferior's memory at MEMADDR.
On failure (cannot write the inferior)
returns the value of errno. */
static int
spu_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len)
{
int fd, ret;
CORE_ADDR addr;
char annex[32], lslr_annex[32], buf[32];
CORE_ADDR lslr;
/* We must be stopped on a spu_run system call. */
if (!parse_spufs_run (&fd, &addr))
return 0;
/* Use the "mem" spufs file to access SPU local store. */
sprintf (annex, "%d/mem", fd);
ret = spu_proc_xfer_spu (annex, NULL, myaddr, memaddr, len);
if (ret > 0)
return ret == len ? 0 : EIO;
/* SPU local store access wraps the address around at the
local store limit. We emulate this here. To avoid needing
an extra access to retrieve the LSLR, we only do that after
trying the original address first, and getting end-of-file. */
sprintf (lslr_annex, "%d/lslr", fd);
memset (buf, 0, sizeof buf);
if (spu_proc_xfer_spu (lslr_annex, (unsigned char *)buf, NULL,
0, sizeof buf) <= 0)
return ret;
lslr = strtoul (buf, NULL, 16);
ret = spu_proc_xfer_spu (annex, NULL, myaddr, memaddr & lslr, len);
return ret == len ? 0 : EIO;
}
/* Look up special symbols -- unneded here. */
static void
spu_look_up_symbols (void)
{
}
/* Send signal to inferior. */
static void
spu_request_interrupt (void)
{
syscall (SYS_tkill, ptid_get_lwp (current_ptid), SIGINT);
}
static struct target_ops spu_target_ops = {
spu_create_inferior,
spu_attach,
spu_kill,
spu_detach,
spu_mourn,
spu_join,
spu_thread_alive,
spu_resume,
spu_wait,
spu_fetch_registers,
spu_store_registers,
NULL, /* prepare_to_access_memory */
NULL, /* done_accessing_memory */
spu_read_memory,
spu_write_memory,
spu_look_up_symbols,
spu_request_interrupt,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
spu_proc_xfer_spu,
hostio_last_error_from_errno,
};
void
initialize_low (void)
{
static const unsigned char breakpoint[] = { 0x00, 0x00, 0x3f, 0xff };
set_target_ops (&spu_target_ops);
set_breakpoint_data (breakpoint, sizeof breakpoint);
init_registers_spu ();
}