old-cross-binutils/gdb/rs6000-tdep.c
Fred Fish e676a15f0b * Makefile.in (VERSION): Bump to 4.5.6.
* coffread.c (coff_end_symtab):  Cast 2nd arg of complain() to
	correct type.
	* defs.h (NORETURN):  Define away for Lucid compiler.
	* remote.c (remote_timer, remote_interrupt):  Signal handlers
	take one int arg.
	* ser-termios.c (serial_write, serial_close):  Return whatever
	value the write/close call returns, rather than falling off end.
	* inferior.h (PTRACE_ARG3_TYPE):  Third arg to ptrace is int on
	more systems than it is "char *".  Define PTRACE_ARG3_TYPE to
	default to int.
	* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
	inferior.h (call_ptrace):  Use PTRACE_ARG3_TYPE to declare type
	of third arg.
	* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
	m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
	pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
	symm-xdep.c, ultra3-xdep.c:  Use PTRACE_ARG3_TYPE to cast ptrace
	argument 3.
	* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
	store_inferior_registers): Supply missing fourth argument to
	ptrace().
1992-06-24 04:49:48 +00:00

886 lines
25 KiB
C

/* Target-dependent code for GDB, the GNU debugger.
Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "symtab.h"
#include "target.h"
#include <sys/param.h>
#include <sys/dir.h>
#include <sys/user.h>
#include <signal.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <sys/ptrace.h>
#include <sys/reg.h>
#include <a.out.h>
#include <sys/file.h>
#include <sys/stat.h>
#include <sys/core.h>
extern int errno;
extern int attach_flag;
/* Nonzero if we just simulated a single step break. */
int one_stepped;
/* Breakpoint shadows for the single step instructions will be kept here. */
static struct sstep_breaks {
int address;
int data;
} stepBreaks[2];
/*
* Calculate the destination of a branch/jump. Return -1 if not a branch.
*/
static int
branch_dest (opcode, instr, pc, safety)
int opcode, instr, pc, safety;
{
register long offset;
unsigned dest;
int immediate;
int absolute;
int ext_op;
absolute = (int) ((instr >> 1) & 1);
switch (opcode) {
case 18 :
immediate = ((instr & ~3) << 6) >> 6; /* br unconditionl */
case 16 :
if (opcode != 18) /* br conditional */
immediate = ((instr & ~3) << 16) >> 16;
if (absolute)
dest = immediate;
else
dest = pc + immediate;
break;
case 19 :
ext_op = (instr>>1) & 0x3ff;
if (ext_op == 16) /* br conditional register */
dest = read_register (LR_REGNUM) & ~3;
else if (ext_op == 528) /* br cond to count reg */
dest = read_register (CTR_REGNUM) & ~3;
else return -1;
break;
default: return -1;
}
return (dest < TEXT_SEGMENT_BASE) ? safety : dest;
}
/* AIX does not support PT_STEP. Simulate it. */
int
single_step (signal)
int signal;
{
#define INSNLEN(OPCODE) 4
static char breakp[] = BREAKPOINT;
int ii, insn, ret, loc;
int breaks[2], opcode;
if (!one_stepped) {
extern CORE_ADDR text_start;
loc = read_pc ();
ret = read_memory (loc, &insn, sizeof (int));
if (ret)
printf ("Error in single_step()!!\n");
breaks[0] = loc + INSNLEN(insn);
opcode = insn >> 26;
breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
/* Don't put two breakpoints on the same address. */
if (breaks[1] == breaks[0])
breaks[1] = -1;
stepBreaks[1].address = -1;
for (ii=0; ii < 2; ++ii) {
/* ignore invalid breakpoint. */
if ( breaks[ii] == -1)
continue;
read_memory (breaks[ii], &(stepBreaks[ii].data), sizeof(int));
ret = write_memory (breaks[ii], breakp, sizeof(int));
stepBreaks[ii].address = breaks[ii];
}
one_stepped = 1;
ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal, 0);
}
else {
/* remove step breakpoints. */
for (ii=0; ii < 2; ++ii)
if (stepBreaks[ii].address != -1)
write_memory
(stepBreaks[ii].address, &(stepBreaks[ii].data), sizeof(int));
one_stepped = 0;
}
errno = 0;
return 1;
}
/* return pc value after skipping a function prologue. */
skip_prologue (pc)
int pc;
{
unsigned int tmp;
unsigned int op;
if (target_read_memory (pc, (char *)&op, sizeof (op)))
return pc; /* Can't access it -- assume no prologue. */
SWAP_TARGET_AND_HOST (&op, sizeof (op));
/* Assume that subsequent fetches can fail with low probability. */
if (op == 0x7c0802a6) { /* mflr r0 */
pc += 4;
op = read_memory_integer (pc, 4);
}
if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
pc += 4;
op = read_memory_integer (pc, 4);
}
if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
pc += 4;
op = read_memory_integer (pc, 4);
/* At this point, make sure this is not a trampoline function
(a function that simply calls another functions, and nothing else).
If the next is not a nop, this branch was part of the function
prologue. */
if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
op == 0x0)
return pc - 4; /* don't skip over this branch */
}
if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
pc += 4;
op = read_memory_integer (pc, 4);
}
while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
(tmp == 0x9421) || /* stu r1, NUM(r1) */
(op == 0x93e1fffc)) /* st r31,-4(r1) */
{
pc += 4;
op = read_memory_integer (pc, 4);
}
while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
pc += 4; /* l r30, ... */
op = read_memory_integer (pc, 4);
}
/* store parameters into stack */
while(
(op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
(op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
(op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
(op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
{
pc += 4; /* store fpr double */
op = read_memory_integer (pc, 4);
}
if (op == 0x603f0000) { /* oril r31, r1, 0x0 */
pc += 4; /* this happens if r31 is used as */
op = read_memory_integer (pc, 4); /* frame ptr. (gcc does that) */
tmp = 0;
while ((op >> 16) == (0x907f + tmp)) { /* st r3, NUM(r31) */
pc += 4; /* st r4, NUM(r31), ... */
op = read_memory_integer (pc, 4);
tmp += 0x20;
}
}
#if 0
/* I have problems with skipping over __main() that I need to address
* sometime. Previously, I used to use misc_function_vector which
* didn't work as well as I wanted to be. -MGO */
/* If the first thing after skipping a prolog is a branch to a function,
this might be a call to an initializer in main(), introduced by gcc2.
We'd like to skip over it as well. Fortunately, xlc does some extra
work before calling a function right after a prologue, thus we can
single out such gcc2 behaviour. */
if ((op & 0xfc000001) == 0x48000001) { /* bl foo, an initializer function? */
op = read_memory_integer (pc+4, 4);
if (op == 0x4def7b82) { /* cror 0xf, 0xf, 0xf (nop) */
/* check and see if we are in main. If so, skip over this initializer
function as well. */
tmp = find_pc_misc_function (pc);
if (tmp >= 0 && !strcmp (misc_function_vector [tmp].name, "main"))
return pc + 8;
}
}
#endif /* 0 */
return pc;
}
/* text start and end addresses in virtual memory. */
CORE_ADDR text_start;
CORE_ADDR text_end;
/*************************************************************************
Support for creating pushind a dummy frame into the stack, and popping
frames, etc.
*************************************************************************/
/* The total size of dummy frame is 436, which is;
32 gpr's - 128 bytes
32 fpr's - 256 "
7 the rest - 28 "
and 24 extra bytes for the callee's link area. The last 24 bytes
for the link area might not be necessary, since it will be taken
care of by push_arguments(). */
#define DUMMY_FRAME_SIZE 436
#define DUMMY_FRAME_ADDR_SIZE 10
/* Make sure you initialize these in somewhere, in case gdb gives up what it
was debugging and starts debugging something else. FIXMEibm */
static int dummy_frame_count = 0;
static int dummy_frame_size = 0;
static CORE_ADDR *dummy_frame_addr = 0;
extern int stop_stack_dummy;
/* push a dummy frame into stack, save all register. Currently we are saving
only gpr's and fpr's, which is not good enough! FIXMEmgo */
push_dummy_frame ()
{
int sp, pc; /* stack pointer and link register */
int ii;
fetch_inferior_registers (-1);
if (dummy_frame_count >= dummy_frame_size) {
dummy_frame_size += DUMMY_FRAME_ADDR_SIZE;
if (dummy_frame_addr)
dummy_frame_addr = (CORE_ADDR*) xrealloc
(dummy_frame_addr, sizeof(CORE_ADDR) * (dummy_frame_size));
else
dummy_frame_addr = (CORE_ADDR*)
xmalloc (sizeof(CORE_ADDR) * (dummy_frame_size));
}
sp = read_register(SP_REGNUM);
pc = read_register(PC_REGNUM);
dummy_frame_addr [dummy_frame_count++] = sp;
/* Be careful! If the stack pointer is not decremented first, then kernel
thinks he is free to use the space underneath it. And kernel actually
uses that area for IPC purposes when executing ptrace(2) calls. So
before writing register values into the new frame, decrement and update
%sp first in order to secure your frame. */
write_register (SP_REGNUM, sp-DUMMY_FRAME_SIZE);
/* gdb relies on the state of current_frame. We'd better update it,
otherwise things like do_registers_info() wouldn't work properly! */
flush_cached_frames ();
set_current_frame (create_new_frame (sp-DUMMY_FRAME_SIZE, pc));
/* save program counter in link register's space. */
write_memory (sp+8, &pc, 4);
/* save all floating point and general purpose registers here. */
/* fpr's, f0..f31 */
for (ii = 0; ii < 32; ++ii)
write_memory (sp-8-(ii*8), &registers[REGISTER_BYTE (31-ii+FP0_REGNUM)], 8);
/* gpr's r0..r31 */
for (ii=1; ii <=32; ++ii)
write_memory (sp-256-(ii*4), &registers[REGISTER_BYTE (32-ii)], 4);
/* so far, 32*2 + 32 words = 384 bytes have been written.
7 extra registers in our register set: pc, ps, cnd, lr, cnt, xer, mq */
for (ii=1; ii <= (LAST_SP_REGNUM-FIRST_SP_REGNUM+1); ++ii) {
write_memory (sp-384-(ii*4),
&registers[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
}
/* Save sp or so called back chain right here. */
write_memory (sp-DUMMY_FRAME_SIZE, &sp, 4);
sp -= DUMMY_FRAME_SIZE;
/* And finally, this is the back chain. */
write_memory (sp+8, &pc, 4);
}
/* Pop a dummy frame.
In rs6000 when we push a dummy frame, we save all of the registers. This
is usually done before user calls a function explicitly.
After a dummy frame is pushed, some instructions are copied into stack,
and stack pointer is decremented even more. Since we don't have a frame
pointer to get back to the parent frame of the dummy, we start having
trouble poping it. Therefore, we keep a dummy frame stack, keeping
addresses of dummy frames as such. When poping happens and when we
detect that was a dummy frame, we pop it back to its parent by using
dummy frame stack (`dummy_frame_addr' array).
*/
pop_dummy_frame ()
{
CORE_ADDR sp, pc;
int ii;
sp = dummy_frame_addr [--dummy_frame_count];
/* restore all fpr's. */
for (ii = 1; ii <= 32; ++ii)
read_memory (sp-(ii*8), &registers[REGISTER_BYTE (32-ii+FP0_REGNUM)], 8);
/* restore all gpr's */
for (ii=1; ii <= 32; ++ii) {
read_memory (sp-256-(ii*4), &registers[REGISTER_BYTE (32-ii)], 4);
}
/* restore the rest of the registers. */
for (ii=1; ii <=(LAST_SP_REGNUM-FIRST_SP_REGNUM+1); ++ii)
read_memory (sp-384-(ii*4),
&registers[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
read_memory (sp-(DUMMY_FRAME_SIZE-8),
&registers [REGISTER_BYTE(PC_REGNUM)], 4);
/* when a dummy frame was being pushed, we had to decrement %sp first, in
order to secure astack space. Thus, saved %sp (or %r1) value, is not the
one we should restore. Change it with the one we need. */
*(int*)&registers [REGISTER_BYTE(FP_REGNUM)] = sp;
/* Now we can restore all registers. */
store_inferior_registers (-1);
pc = read_pc ();
flush_cached_frames ();
set_current_frame (create_new_frame (sp, pc));
}
/* pop the innermost frame, go back to the caller. */
pop_frame ()
{
int pc, lr, sp, prev_sp; /* %pc, %lr, %sp */
struct aix_framedata fdata;
FRAME fr = get_current_frame ();
int addr, ii;
pc = read_pc ();
sp = FRAME_FP (fr);
if (stop_stack_dummy && dummy_frame_count) {
pop_dummy_frame ();
return;
}
/* figure out previous %pc value. If the function is frameless, it is
still in the link register, otherwise walk the frames and retrieve the
saved %pc value in the previous frame. */
addr = get_pc_function_start (fr->pc) + FUNCTION_START_OFFSET;
function_frame_info (addr, &fdata);
read_memory (sp, &prev_sp, 4);
if (fdata.frameless)
lr = read_register (LR_REGNUM);
else
read_memory (prev_sp+8, &lr, 4);
/* reset %pc value. */
write_register (PC_REGNUM, lr);
/* reset register values if any was saved earlier. */
addr = prev_sp - fdata.offset;
if (fdata.saved_gpr != -1)
for (ii=fdata.saved_gpr; ii <= 31; ++ii) {
read_memory (addr, &registers [REGISTER_BYTE (ii)], 4);
addr += sizeof (int);
}
if (fdata.saved_fpr != -1)
for (ii=fdata.saved_fpr; ii <= 31; ++ii) {
read_memory (addr, &registers [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
addr += 8;
}
write_register (SP_REGNUM, prev_sp);
store_inferior_registers (-1);
flush_cached_frames ();
set_current_frame (create_new_frame (prev_sp, lr));
}
/* fixup the call sequence of a dummy function, with the real function address.
its argumets will be passed by gdb. */
fix_call_dummy(dummyname, pc, fun, nargs, type)
char *dummyname;
int pc;
int fun;
int nargs; /* not used */
int type; /* not used */
{
#define TOC_ADDR_OFFSET 20
#define TARGET_ADDR_OFFSET 28
int ii;
unsigned long target_addr;
unsigned long tocvalue;
target_addr = fun;
tocvalue = find_toc_address (target_addr);
ii = *(int*)((char*)dummyname + TOC_ADDR_OFFSET);
ii = (ii & 0xffff0000) | (tocvalue >> 16);
*(int*)((char*)dummyname + TOC_ADDR_OFFSET) = ii;
ii = *(int*)((char*)dummyname + TOC_ADDR_OFFSET+4);
ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
*(int*)((char*)dummyname + TOC_ADDR_OFFSET+4) = ii;
ii = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET);
ii = (ii & 0xffff0000) | (target_addr >> 16);
*(int*)((char*)dummyname + TARGET_ADDR_OFFSET) = ii;
ii = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4);
ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
*(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4) = ii;
}
/* return information about a function frame.
in struct aix_frameinfo fdata:
- frameless is TRUE, if function does not save %pc value in its frame.
- offset is the number of bytes used in the frame to save registers.
- saved_gpr is the number of the first saved gpr.
- saved_fpr is the number of the first saved fpr.
- alloca_reg is the number of the register used for alloca() handling.
Otherwise -1.
*/
function_frame_info (pc, fdata)
int pc;
struct aix_framedata *fdata;
{
unsigned int tmp;
register unsigned int op;
fdata->offset = 0;
fdata->saved_gpr = fdata->saved_fpr = fdata->alloca_reg = -1;
op = read_memory_integer (pc, 4);
if (op == 0x7c0802a6) { /* mflr r0 */
pc += 4;
op = read_memory_integer (pc, 4);
fdata->frameless = 0;
}
else /* else, this is a frameless invocation */
fdata->frameless = 1;
if ((op & 0xfc00003e) == 0x7c000026) { /* mfcr Rx */
pc += 4;
op = read_memory_integer (pc, 4);
}
if ((op & 0xfc000000) == 0x48000000) { /* bl foo, to save fprs??? */
pc += 4;
op = read_memory_integer (pc, 4);
/* At this point, make sure this is not a trampoline function
(a function that simply calls another functions, and nothing else).
If the next is not a nop, this branch was part of the function
prologue. */
if (op == 0x4def7b82 || /* crorc 15, 15, 15 */
op == 0x0)
return; /* prologue is over */
}
if ((op & 0xfc1f0000) == 0xd8010000) { /* stfd Rx,NUM(r1) */
pc += 4; /* store floating register double */
op = read_memory_integer (pc, 4);
}
if ((op & 0xfc1f0000) == 0xbc010000) { /* stm Rx, NUM(r1) */
int tmp2;
fdata->saved_gpr = (op >> 21) & 0x1f;
tmp2 = op & 0xffff;
if (tmp2 > 0x7fff)
tmp2 = 0xffff0000 | tmp2;
if (tmp2 < 0) {
tmp2 = tmp2 * -1;
fdata->saved_fpr = (tmp2 - ((32 - fdata->saved_gpr) * 4)) / 8;
if ( fdata->saved_fpr > 0)
fdata->saved_fpr = 32 - fdata->saved_fpr;
else
fdata->saved_fpr = -1;
}
fdata->offset = tmp2;
pc += 4;
op = read_memory_integer (pc, 4);
}
while (((tmp = op >> 16) == 0x9001) || /* st r0, NUM(r1) */
(tmp == 0x9421) || /* stu r1, NUM(r1) */
(op == 0x93e1fffc)) /* st r31,-4(r1) */
{
/* gcc takes a short cut and uses this instruction to save r31 only. */
if (op == 0x93e1fffc) {
if (fdata->offset)
/* fatal ("Unrecognized prolog."); */
printf ("Unrecognized prolog!\n");
fdata->saved_gpr = 31;
fdata->offset = 4;
}
pc += 4;
op = read_memory_integer (pc, 4);
}
while ((tmp = (op >> 22)) == 0x20f) { /* l r31, ... or */
pc += 4; /* l r30, ... */
op = read_memory_integer (pc, 4);
}
/* store parameters into stack */
while(
(op & 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
(op & 0xfc1f0000) == 0x90010000 || /* st r?, NUM(r1) */
(op & 0xfc000000) == 0xfc000000 || /* frsp, fp?, .. */
(op & 0xd0000000) == 0xd0000000) /* stfs, fp?, .. */
{
pc += 4; /* store fpr double */
op = read_memory_integer (pc, 4);
}
if (op == 0x603f0000) /* oril r31, r1, 0x0 */
fdata->alloca_reg = 31;
}
/* Pass the arguments in either registers, or in the stack. In RS6000, the first
eight words of the argument list (that might be less than eight parameters if
some parameters occupy more than one word) are passed in r3..r11 registers.
float and double parameters are passed in fpr's, in addition to that. Rest of
the parameters if any are passed in user stack. There might be cases in which
half of the parameter is copied into registers, the other half is pushed into
stack.
If the function is returning a structure, then the return address is passed
in r3, then the first 7 words of the parametes can be passed in registers,
starting from r4. */
CORE_ADDR
push_arguments (nargs, args, sp, struct_return, struct_addr)
int nargs;
value *args;
CORE_ADDR sp;
int struct_return;
CORE_ADDR struct_addr;
{
int ii, len;
int argno; /* current argument number */
int argbytes; /* current argument byte */
char tmp_buffer [50];
value arg;
int f_argno = 0; /* current floating point argno */
CORE_ADDR saved_sp, pc;
if ( dummy_frame_count <= 0)
printf ("FATAL ERROR -push_arguments()! frame not found!!\n");
/* The first eight words of ther arguments are passed in registers. Copy
them appropriately.
If the function is returning a `struct', then the first word (which
will be passed in r3) is used for struct return address. In that
case we should advance one word and start from r4 register to copy
parameters. */
ii = struct_return ? 1 : 0;
for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
arg = value_arg_coerce (args[argno]);
len = TYPE_LENGTH (VALUE_TYPE (arg));
if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT) {
/* floating point arguments are passed in fpr's, as well as gpr's.
There are 13 fpr's reserved for passing parameters. At this point
there is no way we would run out of them. */
if (len > 8)
printf (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
bcopy (VALUE_CONTENTS (arg),
&registers[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], len);
++f_argno;
}
if (len > 4) {
/* Argument takes more than one register. */
while (argbytes < len) {
*(int*)&registers[REGISTER_BYTE(ii+3)] = 0;
bcopy ( ((char*)VALUE_CONTENTS (arg))+argbytes,
&registers[REGISTER_BYTE(ii+3)],
(len - argbytes) > 4 ? 4 : len - argbytes);
++ii, argbytes += 4;
if (ii >= 8)
goto ran_out_of_registers_for_arguments;
}
argbytes = 0;
--ii;
}
else { /* Argument can fit in one register. No problem. */
*(int*)&registers[REGISTER_BYTE(ii+3)] = 0;
bcopy (VALUE_CONTENTS (arg), &registers[REGISTER_BYTE(ii+3)], len);
}
++argno;
}
ran_out_of_registers_for_arguments:
/* location for 8 parameters are always reserved. */
sp -= 4 * 8;
/* another six words for back chain, TOC register, link register, etc. */
sp -= 24;
/* if there are more arguments, allocate space for them in
the stack, then push them starting from the ninth one. */
if ((argno < nargs) || argbytes) {
int space = 0, jj;
value val;
if (argbytes) {
space += ((len - argbytes + 3) & -4);
jj = argno + 1;
}
else
jj = argno;
for (; jj < nargs; ++jj) {
val = value_arg_coerce (args[jj]);
space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
}
/* add location required for the rest of the parameters */
space = (space + 7) & -8;
sp -= space;
/* This is another instance we need to be concerned about securing our
stack space. If we write anything underneath %sp (r1), we might conflict
with the kernel who thinks he is free to use this area. So, update %sp
first before doing anything else. */
write_register (SP_REGNUM, sp);
/* if the last argument copied into the registers didn't fit there
completely, push the rest of it into stack. */
if (argbytes) {
write_memory (
sp+24+(ii*4), ((char*)VALUE_CONTENTS (arg))+argbytes, len - argbytes);
++argno;
ii += ((len - argbytes + 3) & -4) / 4;
}
/* push the rest of the arguments into stack. */
for (; argno < nargs; ++argno) {
arg = value_arg_coerce (args[argno]);
len = TYPE_LENGTH (VALUE_TYPE (arg));
/* float types should be passed in fpr's, as well as in the stack. */
if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FLT && f_argno < 13) {
if (len > 8)
printf (
"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
bcopy (VALUE_CONTENTS (arg),
&registers[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], len);
++f_argno;
}
write_memory (sp+24+(ii*4), VALUE_CONTENTS (arg), len);
ii += ((len + 3) & -4) / 4;
}
}
else
/* Secure stack areas first, before doing anything else. */
write_register (SP_REGNUM, sp);
saved_sp = dummy_frame_addr [dummy_frame_count - 1];
read_memory (saved_sp, tmp_buffer, 24);
write_memory (sp, tmp_buffer, 24);
write_memory (sp, &saved_sp, 4); /* set back chain properly */
store_inferior_registers (-1);
return sp;
}
/* a given return value in `regbuf' with a type `valtype', extract and copy its
value into `valbuf' */
extract_return_value (valtype, regbuf, valbuf)
struct type *valtype;
char regbuf[REGISTER_BYTES];
char *valbuf;
{
if (TYPE_CODE (valtype) == TYPE_CODE_FLT) {
double dd; float ff;
/* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
We need to truncate the return value into float size (4 byte) if
necessary. */
if (TYPE_LENGTH (valtype) > 4) /* this is a double */
bcopy (&regbuf[REGISTER_BYTE (FP0_REGNUM + 1)], valbuf,
TYPE_LENGTH (valtype));
else { /* float */
bcopy (&regbuf[REGISTER_BYTE (FP0_REGNUM + 1)], &dd, 8);
ff = (float)dd;
bcopy (&ff, valbuf, sizeof(float));
}
}
else
/* return value is copied starting from r3. */
bcopy (&regbuf[REGISTER_BYTE (3)], valbuf, TYPE_LENGTH (valtype));
}
/* keep keep structure return address in this variable. */
CORE_ADDR rs6000_struct_return_address;
/* Throw away this debugging code. FIXMEmgo. */
print_frame(fram)
int fram;
{
int ii, val;
for (ii=0; ii<40; ++ii) {
if ((ii % 4) == 0)
printf ("\n");
val = read_memory_integer (fram + ii * 4, 4);
printf ("0x%08x\t", val);
}
printf ("\n");
}
/* Indirect function calls use a piece of trampoline code to do context
switching, i.e. to set the new TOC table. Skip such code if we are on
its first instruction (as when we have single-stepped to here).
Result is desired PC to step until, or NULL if we are not in
trampoline code. */
skip_trampoline_code (pc)
int pc;
{
register unsigned int ii, op;
static unsigned trampoline_code[] = {
0x800b0000, /* l r0,0x0(r11) */
0x90410014, /* st r2,0x14(r1) */
0x7c0903a6, /* mtctr r0 */
0x804b0004, /* l r2,0x4(r11) */
0x816b0008, /* l r11,0x8(r11) */
0x4e800420, /* bctr */
0x4e800020, /* br */
0
};
for (ii=0; trampoline_code[ii]; ++ii) {
op = read_memory_integer (pc + (ii*4), 4);
if (op != trampoline_code [ii])
return NULL;
}
ii = read_register (11); /* r11 holds destination addr */
pc = read_memory_integer (ii, 4); /* (r11) value */
return pc;
}