old-cross-binutils/gdb/valprint.c
Fred Fish 7efb57c33d * defs.h (CC_HAS_LONG_LONG): Set up to define CC_HAS_LONG_LONG
when compiling with gcc, but disable it for now.  See comment.
	* defs.h (LONGEST):  Define as either "long" or "long long"
	based on CC_HAS_LONG_LONG.
	* defs.h (longest_to_int):  Use CC_HAS_LONG_LONG to control
	how longest_to_int is defined.
	* c-valprint.c (c_val_print):  Call print_longest.
	* expprint.c (dump_expression):  Use PRINTF_HAS_LONG_LONG
	instead of LONG_LONG.
	* {printcmd.c, gdbtypes.h} (LONG_LONG):  Replace usages with
	CC_HAS_LONG_LONG.
	* printcmd.c (print_scalar_formatted):  Call print_longest
	and let it figure out what to do for PRINTF_HAS_LONG_LONG.
	* typeprint.c (print_type_scalar):  Call print_longest and let
	it figure out what to do for PRINTF_HAS_LONG_LONG.
	* valprint.c (val_print_type_code_int):  Call print_longest
	and let it figure out what to do for PRINTF_HAS_LONG_LONG.
	* stabsread.c (LONG_LONG):  Replace usages with CC_HAS_LONG_LONG.
	* value.h (struct value):  Replace usage of LONG_LONG with
	CC_HAS_LONG_LONG.
	* value.h (print_longest):  Add prototype.
	* values.c (LONG_LONG):  Replace usages with CC_HAS_LONG_LONG.
	* values.c (unpack_double):  Collapse code that was unnecessarily
	dependent on CC_HAS_LONG_LONG.  Use LONGEST instead of direct types.
	* values.c (value_from_longest):  Remove dependency on
	CC_HAS_LONG_LONG and just use LONGEST.
	* solib.c (solib_map_sections):  Use bfd_get_filename
	to access filename field.
	* solib.c (clear_solib):  Save filename and free it later, after
	bfd_close, since bfd_close may reference it.  Use bfd_get_filename
	to access the field.
	* config/convex/xm-convex.h (LONG_LONG):  Replace with
	CC_HAS_LONG_LONG.  Add define for PRINTF_HAS_LONG_LONG.
	* doc/gdbint.texinfo (LONG_LONG):  Replace with CC_HAS_LONG_LONG.
	Add PRINTF_HAS_LONG_LONG references.
1993-04-29 07:07:39 +00:00

962 lines
27 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Print values for GDB, the GNU debugger.
Copyright 1986, 1988, 1989, 1991 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include <string.h>
#include "symtab.h"
#include "gdbtypes.h"
#include "value.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
#include "obstack.h"
#include "language.h"
#include "demangle.h"
#include <errno.h>
/* Prototypes for local functions */
static void
print_hex_chars PARAMS ((FILE *, unsigned char *, unsigned int));
static void
show_print PARAMS ((char *, int));
static void
set_print PARAMS ((char *, int));
static void
set_radix PARAMS ((char *, int, struct cmd_list_element *));
static void
set_output_radix PARAMS ((char *, int, struct cmd_list_element *));
static void
value_print_array_elements PARAMS ((value, FILE *, int, enum val_prettyprint));
/* Maximum number of chars to print for a string pointer value
or vector contents, or UINT_MAX for no limit. */
unsigned int print_max;
/* Default input and output radixes, and output format letter. */
unsigned input_radix = 10;
unsigned output_radix = 10;
int output_format = 0;
/* Print repeat counts if there are more than this many repetitions of an
element in an array. Referenced by the low level language dependent
print routines. */
unsigned int repeat_count_threshold = 10;
int prettyprint_structs; /* Controls pretty printing of structures */
int prettyprint_arrays; /* Controls pretty printing of arrays. */
/* If nonzero, causes unions inside structures or other unions to be
printed. */
int unionprint; /* Controls printing of nested unions. */
/* If nonzero, causes machine addresses to be printed in certain contexts. */
int addressprint; /* Controls printing of machine addresses */
/* Print data of type TYPE located at VALADDR (within GDB), which came from
the inferior at address ADDRESS, onto stdio stream STREAM according to
FORMAT (a letter, or 0 for natural format using TYPE).
If DEREF_REF is nonzero, then dereference references, otherwise just print
them like pointers.
The PRETTY parameter controls prettyprinting.
If the data are a string pointer, returns the number of string characters
printed.
FIXME: The data at VALADDR is in target byte order. If gdb is ever
enhanced to be able to debug more than the single target it was compiled
for (specific CPU type and thus specific target byte ordering), then
either the print routines are going to have to take this into account,
or the data is going to have to be passed into here already converted
to the host byte ordering, whichever is more convenient. */
int
val_print (type, valaddr, address, stream, format, deref_ref, recurse, pretty)
struct type *type;
char *valaddr;
CORE_ADDR address;
FILE *stream;
int format;
int deref_ref;
int recurse;
enum val_prettyprint pretty;
{
if (pretty == Val_pretty_default)
{
pretty = prettyprint_structs ? Val_prettyprint : Val_no_prettyprint;
}
QUIT;
/* Ensure that the type is complete and not just a stub. If the type is
only a stub and we can't find and substitute its complete type, then
print appropriate string and return. Typical types that my be stubs
are structs, unions, and C++ methods. */
check_stub_type (type);
if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
{
fprintf_filtered (stream, "<incomplete type>");
fflush (stream);
return (0);
}
return (LA_VAL_PRINT (type, valaddr, address, stream, format, deref_ref,
recurse, pretty));
}
/* Print the value VAL in C-ish syntax on stream STREAM.
FORMAT is a format-letter, or 0 for print in natural format of data type.
If the object printed is a string pointer, returns
the number of string bytes printed. */
int
value_print (val, stream, format, pretty)
value val;
FILE *stream;
int format;
enum val_prettyprint pretty;
{
register unsigned int n, typelen;
if (val == 0)
{
printf_filtered ("<address of value unknown>");
return 0;
}
if (VALUE_OPTIMIZED_OUT (val))
{
printf_filtered ("<value optimized out>");
return 0;
}
/* A "repeated" value really contains several values in a row.
They are made by the @ operator.
Print such values as if they were arrays. */
if (VALUE_REPEATED (val))
{
n = VALUE_REPETITIONS (val);
typelen = TYPE_LENGTH (VALUE_TYPE (val));
fprintf_filtered (stream, "{");
/* Print arrays of characters using string syntax. */
if (typelen == 1 && TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT
&& format == 0)
LA_PRINT_STRING (stream, VALUE_CONTENTS (val), n, 0);
else
{
value_print_array_elements (val, stream, format, pretty);
}
fprintf_filtered (stream, "}");
return (n * typelen);
}
else
{
struct type *type = VALUE_TYPE (val);
/* If it is a pointer, indicate what it points to.
Print type also if it is a reference.
C++: if it is a member pointer, we will take care
of that when we print it. */
if (TYPE_CODE (type) == TYPE_CODE_PTR ||
TYPE_CODE (type) == TYPE_CODE_REF)
{
/* Hack: remove (char *) for char strings. Their
type is indicated by the quoted string anyway. */
if (TYPE_CODE (type) == TYPE_CODE_PTR &&
TYPE_LENGTH (TYPE_TARGET_TYPE (type)) == sizeof(char) &&
TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_INT &&
!TYPE_UNSIGNED (TYPE_TARGET_TYPE (type)))
{
/* Print nothing */
}
else
{
fprintf_filtered (stream, "(");
type_print (type, "", stream, -1);
fprintf_filtered (stream, ") ");
}
}
return (val_print (type, VALUE_CONTENTS (val),
VALUE_ADDRESS (val), stream, format, 1, 0, pretty));
}
}
/* Called by various <lang>_val_print routines to print TYPE_CODE_INT's */
void
val_print_type_code_int (type, valaddr, stream)
struct type *type;
char *valaddr;
FILE *stream;
{
char *p;
/* Pointer to first (i.e. lowest address) nonzero character. */
char *first_addr;
unsigned int len;
if (TYPE_LENGTH (type) > sizeof (LONGEST))
{
if (TYPE_UNSIGNED (type))
{
/* First figure out whether the number in fact has zeros
in all its bytes more significant than least significant
sizeof (LONGEST) ones. */
len = TYPE_LENGTH (type);
#if TARGET_BYTE_ORDER == BIG_ENDIAN
for (p = valaddr;
len > sizeof (LONGEST) && p < valaddr + TYPE_LENGTH (type);
p++)
#else /* Little endian. */
first_addr = valaddr;
for (p = valaddr + TYPE_LENGTH (type);
len > sizeof (LONGEST) && p >= valaddr;
p--)
#endif /* Little endian. */
{
if (*p == 0)
{
len--;
}
else
{
break;
}
}
#if TARGET_BYTE_ORDER == BIG_ENDIAN
first_addr = p;
#endif
if (len <= sizeof (LONGEST))
{
/* We can print it in decimal. */
print_longest (stream, 'u', 0,
unpack_long (BUILTIN_TYPE_LONGEST, first_addr));
}
else
{
/* It is big, so print it in hex. */
print_hex_chars (stream, (unsigned char *) first_addr, len);
}
}
else
{
/* Signed. One could assume two's complement (a reasonable
assumption, I think) and do better than this. */
print_hex_chars (stream, (unsigned char *) valaddr,
TYPE_LENGTH (type));
}
}
else
{
#ifdef PRINT_TYPELESS_INTEGER
PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
#else
print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
unpack_long (type, valaddr));
#endif
}
}
/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
The raison d'etre of this function is to consolidate printing of LONG_LONG's
into this one function. Some platforms have long longs but don't have a
printf() that supports "ll" in the format string. We handle these by seeing
if the number is actually a long, and if not we just bail out and print the
number in hex. The format chars b,h,w,g are from
print_scalar_formatted(). USE_LOCAL says whether or not to call the
local formatting routine to get the format. */
void
print_longest (stream, format, use_local, val_long)
FILE *stream;
char format;
int use_local;
LONGEST val_long;
{
#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
long vtop, vbot;
vtop = val_long >> (sizeof (long) * HOST_CHAR_BIT);
vbot = (long) val_long;
if ((format == 'd' && (val_long < INT_MIN || val_long > INT_MAX))
|| ((format == 'u' || format == 'x') && val_long > UINT_MAX))
{
fprintf_filtered (stream, "0x%x%08x", vtop, vbot);
return;
}
#endif
#ifdef PRINTF_HAS_LONG_LONG
switch (format)
{
case 'd':
fprintf_filtered (stream,
use_local ? local_decimal_format_custom ("ll")
: "%lld",
val_long);
break;
case 'u':
fprintf_filtered (stream, "%llu", val_long);
break;
case 'x':
fprintf_filtered (stream,
use_local ? local_hex_format_custom ("ll")
: "%llx",
val_long);
break;
case 'o':
fprintf_filtered (stream,
use_local ? local_octal_format_custom ("ll")
: "%llo",
break;
case 'b':
fprintf_filtered (stream, local_hex_format_custom ("02ll"), val_long);
break;
case 'h':
fprintf_filtered (stream, local_hex_format_custom ("04ll"), val_long);
break;
case 'w':
fprintf_filtered (stream, local_hex_format_custom ("08ll"), val_long);
break;
case 'g':
fprintf_filtered (stream, local_hex_format_custom ("016ll"), val_long);
break;
default:
abort ();
}
#else /* !PRINTF_HAS_LONG_LONG */
/* In the following it is important to coerce (val_long) to a long. It does
nothing if !LONG_LONG, but it will chop off the top half (which we know
we can ignore) if the host supports long longs. */
switch (format)
{
case 'd':
fprintf_filtered (stream,
use_local ? local_decimal_format_custom ("l")
: "%ld",
(long) val_long);
break;
case 'u':
fprintf_filtered (stream, "%lu", (unsigned long) val_long);
break;
case 'x':
fprintf_filtered (stream,
use_local ? local_hex_format_custom ("l")
: "%lx",
(long) val_long);
break;
case 'o':
fprintf_filtered (stream,
use_local ? local_octal_format_custom ("l")
: "%lo",
(long) val_long);
break;
case 'b':
fprintf_filtered (stream, local_hex_format_custom ("02l"),
(long) val_long);
break;
case 'h':
fprintf_filtered (stream, local_hex_format_custom ("04l"),
(long) val_long);
break;
case 'w':
fprintf_filtered (stream, local_hex_format_custom ("08l"),
(long) val_long);
break;
case 'g':
fprintf_filtered (stream, local_hex_format_custom ("016l"),
(long) val_long);
break;
default:
abort ();
}
#endif /* !PRINTF_HAS_LONG_LONG */
}
/* Print a floating point value of type TYPE, pointed to in GDB by VALADDR,
on STREAM. */
void
print_floating (valaddr, type, stream)
char *valaddr;
struct type *type;
FILE *stream;
{
double doub;
int inv;
unsigned len = TYPE_LENGTH (type);
#if defined (IEEE_FLOAT)
/* Check for NaN's. Note that this code does not depend on us being
on an IEEE conforming system. It only depends on the target
machine using IEEE representation. This means (a)
cross-debugging works right, and (2) IEEE_FLOAT can (and should)
be defined for systems like the 68881, which uses IEEE
representation, but is not IEEE conforming. */
{
long low, high;
/* Is the sign bit 0? */
int nonnegative;
/* Is it is a NaN (i.e. the exponent is all ones and
the fraction is nonzero)? */
int is_nan;
if (len == sizeof (float))
{
/* It's single precision. */
memcpy ((char *) &low, valaddr, sizeof (low));
/* target -> host. */
SWAP_TARGET_AND_HOST (&low, sizeof (float));
nonnegative = low >= 0;
is_nan = ((((low >> 23) & 0xFF) == 0xFF)
&& 0 != (low & 0x7FFFFF));
low &= 0x7fffff;
high = 0;
}
else
{
/* It's double precision. Get the high and low words. */
#if TARGET_BYTE_ORDER == BIG_ENDIAN
memcpy (&low, valaddr+4, sizeof (low));
memcpy (&high, valaddr+0, sizeof (high));
#else
memcpy (&low, valaddr+0, sizeof (low));
memcpy (&high, valaddr+4, sizeof (high));
#endif
SWAP_TARGET_AND_HOST (&low, sizeof (low));
SWAP_TARGET_AND_HOST (&high, sizeof (high));
nonnegative = high >= 0;
is_nan = (((high >> 20) & 0x7ff) == 0x7ff
&& ! ((((high & 0xfffff) == 0)) && (low == 0)));
high &= 0xfffff;
}
if (is_nan)
{
/* The meaning of the sign and fraction is not defined by IEEE.
But the user might know what they mean. For example, they
(in an implementation-defined manner) distinguish between
signaling and quiet NaN's. */
if (high)
fprintf_filtered (stream, "-NaN(0x%lx%.8lx)" + nonnegative,
high, low);
else
fprintf_filtered (stream, "-NaN(0x%lx)" + nonnegative, low);
return;
}
}
#endif /* IEEE_FLOAT. */
doub = unpack_double (type, valaddr, &inv);
if (inv)
fprintf_filtered (stream, "<invalid float value>");
else
fprintf_filtered (stream, len <= sizeof(float) ? "%.9g" : "%.17g", doub);
}
/* VALADDR points to an integer of LEN bytes. Print it in hex on stream. */
static void
print_hex_chars (stream, valaddr, len)
FILE *stream;
unsigned char *valaddr;
unsigned len;
{
unsigned char *p;
fprintf_filtered (stream, "0x");
#if TARGET_BYTE_ORDER == BIG_ENDIAN
for (p = valaddr;
p < valaddr + len;
p++)
#else /* Little endian. */
for (p = valaddr + len - 1;
p >= valaddr;
p--)
#endif
{
fprintf_filtered (stream, "%02x", *p);
}
}
/* Called by various <lang>_val_print routines to print elements of an
array in the form "<elem1>, <elem2>, <elem3>, ...".
(FIXME?) Assumes array element separator is a comma, which is correct
for all languages currently handled.
(FIXME?) Some languages have a notation for repeated array elements,
perhaps we should try to use that notation when appropriate.
*/
void
val_print_array_elements (type, valaddr, address, stream, format, deref_ref,
recurse, pretty, i)
struct type *type;
char *valaddr;
CORE_ADDR address;
FILE *stream;
int format;
int deref_ref;
int recurse;
enum val_prettyprint pretty;
unsigned int i;
{
unsigned int things_printed = 0;
unsigned len;
struct type *elttype;
unsigned eltlen;
/* Position of the array element we are examining to see
whether it is repeated. */
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
elttype = TYPE_TARGET_TYPE (type);
eltlen = TYPE_LENGTH (elttype);
len = TYPE_LENGTH (type) / eltlen;
for (; i < len && things_printed < print_max; i++)
{
if (i != 0)
{
if (prettyprint_arrays)
{
fprintf_filtered (stream, ",\n");
print_spaces_filtered (2 + 2 * recurse, stream);
}
else
{
fprintf_filtered (stream, ", ");
}
}
wrap_here (n_spaces (2 + 2 * recurse));
rep1 = i + 1;
reps = 1;
while ((rep1 < len) &&
!memcmp (valaddr + i * eltlen, valaddr + rep1 * eltlen, eltlen))
{
++reps;
++rep1;
}
if (reps > repeat_count_threshold)
{
val_print (elttype, valaddr + i * eltlen, 0, stream, format,
deref_ref, recurse + 1, pretty);
fprintf_filtered (stream, " <repeats %u times>", reps);
i = rep1 - 1;
things_printed += repeat_count_threshold;
}
else
{
val_print (elttype, valaddr + i * eltlen, 0, stream, format,
deref_ref, recurse + 1, pretty);
things_printed++;
}
}
if (i < len)
{
fprintf_filtered (stream, "...");
}
}
static void
value_print_array_elements (val, stream, format, pretty)
value val;
FILE *stream;
int format;
enum val_prettyprint pretty;
{
unsigned int things_printed = 0;
register unsigned int i, n, typelen;
/* Position of the array elem we are examining to see if it is repeated. */
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
n = VALUE_REPETITIONS (val);
typelen = TYPE_LENGTH (VALUE_TYPE (val));
for (i = 0; i < n && things_printed < print_max; i++)
{
if (i != 0)
{
fprintf_filtered (stream, ", ");
}
wrap_here ("");
rep1 = i + 1;
reps = 1;
while (rep1 < n && !memcmp (VALUE_CONTENTS (val) + typelen * i,
VALUE_CONTENTS (val) + typelen * rep1,
typelen))
{
++reps;
++rep1;
}
if (reps > repeat_count_threshold)
{
val_print (VALUE_TYPE (val), VALUE_CONTENTS (val) + typelen * i,
VALUE_ADDRESS (val) + typelen * i, stream, format, 1,
0, pretty);
fprintf (stream, " <repeats %u times>", reps);
i = rep1 - 1;
things_printed += repeat_count_threshold;
}
else
{
val_print (VALUE_TYPE (val), VALUE_CONTENTS (val) + typelen * i,
VALUE_ADDRESS (val) + typelen * i, stream, format, 1,
0, pretty);
things_printed++;
}
}
if (i < n)
{
fprintf_filtered (stream, "...");
}
}
/* Print a string from the inferior, starting at ADDR and printing up to LEN
characters, to STREAM. If LEN is zero, printing stops at the first null
byte, otherwise printing proceeds (including null bytes) until either
print_max or LEN characters have been printed.
Always fetch print_max+1 characters, even though LA_PRINT_STRING might want
to print more or fewer (with repeated characters). This is so that we
don't spend forever fetching if we print a long string consisting of the
same character repeated. Also so we can do it all in one memory operation,
which is faster. However, this will be slower if print_max is set high,
e.g. if you set print_max to 1000, not only will it take a long time to
fetch short strings, but if you are near the end of the address space, it
might not work.
If the number of characters we actually print is limited because of hitting
print_max, when LEN would have explicitly or implicitly (in the case of a
null terminated string with another non-null character available to print)
allowed us to print more, we print ellipsis ("...") after the printed string
to indicate that more characters were available to print but that we were
limited by print_max. To do this correctly requires that we always fetch
one more than the number of characters we could potentially print, so that
if we do print the maximum number, we can tell whether or not a null byte
would have been the next character, in the case of C style strings.
For non-C style strings, only the value of LEN is pertinent in deciding
whether or not to print ellipsis.
FIXME: If LEN is nonzero and less than print_max, we could get away
with only fetching the specified number of characters from the inferior. */
int
val_print_string (addr, len, stream)
CORE_ADDR addr;
unsigned int len;
FILE *stream;
{
int first_addr_err = 0; /* Nonzero if first address out of bounds */
int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero */
int errcode;
unsigned char c;
char *string;
/* Get first character. */
errcode = target_read_memory (addr, (char *)&c, 1);
if (errcode != 0)
{
/* First address out of bounds. */
first_addr_err = 1;
}
else if (print_max < UINT_MAX)
{
string = (char *) alloca (print_max + 1);
memset (string, 0, print_max + 1);
QUIT;
errcode = target_read_memory (addr, string, print_max + 1);
if (errcode != 0)
{
/* Try reading just one character. If that succeeds, assume we hit
the end of the address space, but the initial part of the string
is probably safe. */
char x[1];
errcode = target_read_memory (addr, x, 1);
}
if (len == 0)
{
/* When the length is unspecified, such as when printing C style
null byte terminated strings, then scan the string looking for
the terminator in the first print_max characters. If a terminator
is found, then it determines the length, otherwise print_max
determines the length. */
for (;len < print_max; len++)
{
if (string[len] == '\0')
{
break;
}
}
/* If the first unprinted character is not the null terminator, set
the flag to force ellipses. This is true whether or not we broke
out of the above loop because we found a terminator, or whether
we simply hit the limit on how many characters to print. */
if (string[len] != '\0')
{
force_ellipsis = 1;
}
}
else if (len > print_max)
{
/* Printing less than the number of characters actually requested
always makes us print ellipsis. */
len = print_max;
force_ellipsis = 1;
}
QUIT;
if (addressprint)
{
fputs_filtered (" ", stream);
}
LA_PRINT_STRING (stream, string, len, force_ellipsis);
}
if (errcode != 0)
{
if (errcode == EIO)
{
fprintf_filtered (stream,
(" <Address 0x%x out of bounds>" + first_addr_err),
addr + len);
}
else
{
error ("Error reading memory address 0x%x: %s.", addr + len,
safe_strerror (errcode));
}
}
fflush (stream);
return (len);
}
#if 0
/* Validate an input or output radix setting, and make sure the user
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
/* ARGSUSED */
static void
set_input_radix (args, from_tty, c)
char *args;
int from_tty;
struct cmd_list_element *c;
{
unsigned radix = *(unsigned *)c->var;
if (from_tty)
printf_filtered ("Input radix set to decimal %d, hex %x, octal %o\n",
radix, radix, radix);
}
#endif
/* ARGSUSED */
static void
set_output_radix (args, from_tty, c)
char *args;
int from_tty;
struct cmd_list_element *c;
{
unsigned radix = *(unsigned *)c->var;
if (from_tty)
printf_filtered ("Output radix set to decimal %d, hex %x, octal %o\n",
radix, radix, radix);
/* FIXME, we really should be able to validate the setting BEFORE
it takes effect. */
switch (radix)
{
case 16:
output_format = 'x';
break;
case 10:
output_format = 0;
break;
case 8:
output_format = 'o'; /* octal */
break;
default:
output_format = 0;
error ("Unsupported radix ``decimal %d''; using decimal output",
radix);
}
}
/* Both at once */
static void
set_radix (arg, from_tty, c)
char *arg;
int from_tty;
struct cmd_list_element *c;
{
unsigned radix = *(unsigned *)c->var;
if (from_tty)
printf_filtered ("Radix set to decimal %d, hex %x, octal %o\n",
radix, radix, radix);
input_radix = radix;
output_radix = radix;
set_output_radix (arg, 0, c);
}
/*ARGSUSED*/
static void
set_print (arg, from_tty)
char *arg;
int from_tty;
{
printf (
"\"set print\" must be followed by the name of a print subcommand.\n");
help_list (setprintlist, "set print ", -1, stdout);
}
/*ARGSUSED*/
static void
show_print (args, from_tty)
char *args;
int from_tty;
{
cmd_show_list (showprintlist, from_tty, "");
}
void
_initialize_valprint ()
{
struct cmd_list_element *c;
add_prefix_cmd ("print", no_class, set_print,
"Generic command for setting how things print.",
&setprintlist, "set print ", 0, &setlist);
add_alias_cmd ("p", "print", no_class, 1, &setlist);
add_alias_cmd ("pr", "print", no_class, 1, &setlist); /* prefer set print
to set prompt */
add_prefix_cmd ("print", no_class, show_print,
"Generic command for showing print settings.",
&showprintlist, "show print ", 0, &showlist);
add_alias_cmd ("p", "print", no_class, 1, &showlist);
add_alias_cmd ("pr", "print", no_class, 1, &showlist);
add_show_from_set
(add_set_cmd ("elements", no_class, var_uinteger, (char *)&print_max,
"Set limit on string chars or array elements to print.\n\
\"set print elements 0\" causes there to be no limit.",
&setprintlist),
&showprintlist);
add_show_from_set
(add_set_cmd ("repeats", no_class, var_uinteger,
(char *)&repeat_count_threshold,
"Set threshold for repeated print elements.\n\
\"set print repeats 0\" causes all elements to be individually printed.",
&setprintlist),
&showprintlist);
add_show_from_set
(add_set_cmd ("pretty", class_support, var_boolean,
(char *)&prettyprint_structs,
"Set prettyprinting of structures.",
&setprintlist),
&showprintlist);
add_show_from_set
(add_set_cmd ("union", class_support, var_boolean, (char *)&unionprint,
"Set printing of unions interior to structures.",
&setprintlist),
&showprintlist);
add_show_from_set
(add_set_cmd ("array", class_support, var_boolean,
(char *)&prettyprint_arrays,
"Set prettyprinting of arrays.",
&setprintlist),
&showprintlist);
add_show_from_set
(add_set_cmd ("address", class_support, var_boolean, (char *)&addressprint,
"Set printing of addresses.",
&setprintlist),
&showprintlist);
#if 0
/* The "show radix" cmd isn't good enough to show two separate values.
The rest of the code works, but the show part is confusing, so don't
let them be set separately 'til we work out "show". */
c = add_set_cmd ("input-radix", class_support, var_uinteger,
(char *)&input_radix,
"Set default input radix for entering numbers.",
&setlist);
add_show_from_set (c, &showlist);
c->function = set_input_radix;
c = add_set_cmd ("output-radix", class_support, var_uinteger,
(char *)&output_radix,
"Set default output radix for printing of values.",
&setlist);
add_show_from_set (c, &showlist);
c->function = set_output_radix;
#endif
c = add_set_cmd ("radix", class_support, var_uinteger,
(char *)&output_radix,
"Set default input and output number radix.",
&setlist);
add_show_from_set (c, &showlist);
c->function.sfunc = set_radix;
/* Give people the defaults which they are used to. */
prettyprint_structs = 0;
prettyprint_arrays = 0;
unionprint = 1;
addressprint = 1;
print_max = 200;
}