old-cross-binutils/sim/d10v/ChangeLog
Mike Frysinger ce39bd3890 sim: move many common settings from CPPFLAGS to config.h
Rather than stuffing the command line with a bunch of -D flags, start
moving things to config.h which is managed by autoheader.  This makes
the makefile a bit simpler and the build output tighter, and it makes
the migration to automake easier as there are fewer vars to juggle.

We'll want to move the other options out too, but it'll take more work.
2016-01-10 18:54:41 -05:00

1730 lines
58 KiB
Text

2016-01-10 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call.
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_INLINE): Delete call.
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-10 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2016-01-09 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2016-01-06 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Mark argv const.
(sim_create_inferior): Mark argv and env const.
2016-01-04 Mike Frysinger <vapier@gentoo.org>
* endian.c (get_word): Delete all arch/big endian logic.
(get_longword, write_word, write_longword): Likewise.
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Update sim_parse_args comment.
2016-01-03 Mike Frysinger <vapier@gentoo.org>
* configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
* configure: Regenerate.
2016-01-02 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-12-30 Mike Frysinger <vapier@gentoo.org>
* wrapper.c (d10v_reg_store, d10v_reg_fetch): Define.
(sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
(sim_store_register): Rename to ...
(d10v_reg_store): ... this. Rename cpu to sd.
(sim_fetch_register): Rename to ...
(d10v_reg_fetch): ... this. Rename cpu to sd.
2015-12-27 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-hload.o.
2015-12-26 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_open): Delete sim_create_inferior call.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* d10v_sim.h (d10v_callback): Delete.
* interp.c (d10v_callback): Delete.
(do_long, do_2_short, do_parallel, set_dmap_register,
set_imap_register, xfer_mem, dmem_addr, imem_addr, sim_info,
sim_create_inferior): Replace d10v_callback->printf_filtered
with sim_io_printf.
(sim_open): Delete d10v_callback assignment.
* simops.c (move_to_cr, trace_input_func, do_trace_output_flush,
do_trace_output_finish, trace_output_40, trace_output_32,
trace_output_16, trace_output_void, trace_output_flag, OP_5F20,
OP_5201, OP_27000000, OP_3220, OP_3400, OP_3000, OP_6C1F, OP_6C01,
OP_6E1F, OP_6E01): Replace d10v_callback->printf_filtered with
sim_io_printf and d10v_callback->flush_stdout with
sim_io_flush_stdout.
(OP_5F00): Likewise. Rename d10v_callback to cb.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and
sim-stop.o.
* d10v_sim.h (struct d10v_memory): Delete fault member.
(struct _state): Delete exception member.
* interp.c (lookup_hash): Call sim_engine_halt instead of setting
State.exception.
(do_2_short, do_parallel): Delete State.exception checks.
(sim_size): Mark static.
(map_memory): Call sim_engine_halt instead of returning fault.
Call xcalloc instead of calloc and checking the return.
(dmem_addr): Call sim_engine_halt when phys_size is 0.
(imem_addr): Likewise.
(stop_simulator, sim_stop, sim_stop_reason): Delete.
(sim_resume): Rename to ...
(step_once): ... this. Delete State.exception code and move
siggnal checking to sim_engine_run.
(sim_engine_run): New function.
* simops.c (EXCEPTION): Define.
(move_to_cr): Call EXCEPTION instead of setting State.exception.
(OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
OP_6601, OP_6201, OP_6200, OP_33010000, OP_5201, OP_27000000,
OP_2F000000, OP_3220, OP_3200, OP_3400, OP_3000, OP_34000000,
OP_6800, OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000,
OP_6A00, OP_6E1F, OP_6A01, OP_6E01, OP_37010000, OP_5FE0): Likewise.
(OP_5F20): Call sim_engine_halt instead of setting State.exception.
(OP_5F00): Call sim_engine_halt and EXCEPTION instead of setting
State.exception.
2015-11-15 Mike Frysinger <vapier@gentoo.org>
* d10v_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args.
(SET_CREG, SET_HW_CREG, SET_PSW_BIT): Pass sd and cpu to move_to_cr.
(dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args.
(RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr.
* endian.c: Change d10v_sim.h include to sim-main.h.
* gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs.
* interp.c (lookup_hash, do_long, do_2_short, do_parallel,
map_memory, set_dmap_register, dmap_register, set_imap_register,
imap_register, sim_d10v_translate_dmap_addr, xfer_mem,
sim_d10v_translate_imap_addr, sim_d10v_translate_addr): Add
SIM_DESC and SIM_CPU args and adjust all callers.
(trace_sd): Delete.
(sim_open): Do not assign trace_sd.
(sim_resume, sim_create_inferior, sim_fetch_register,
sim_store_register): Set up cpu from the first one in sd.
* simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args.
(trace_input_func, trace_input, do_trace_output_finish,
do_trace_output_finish, trace_output_40, trace_output_32,
trace_output_16, trace_output_void, trace_output_flag): Add
SIM_DESC arg.
(trace_input_func): Likewise. Change trace_sd to sd.
(OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs.
2015-11-14 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_close): Delete.
2015-11-10 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_d10v_translate_dmap_addr): Mark static.
(sim_d10v_translate_imap_addr): Likewise.
(sim_d10v_translate_addr): Likewise.
2015-06-23 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-06-12 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (SIM_CPU): Delete.
2015-04-18 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (sim_cia): Delete.
2015-04-17 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (CIA_GET, CIA_SET): Delete.
2015-04-17 Mike Frysinger <vapier@gentoo.org>
* interp.c (d10v_pc_get, d10v_pc_set): New functions.
(sim_open): Declare new local var i. Call CPU_PC_FETCH &
CPU_PC_STORE for all cpus.
2015-04-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-cpu.o.
* sim-main.h (STATE_CPU): Delete.
2015-04-13 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2015-04-06 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_OBJS): Delete sim-engine.o.
2015-04-02 Mike Frysinger <vapier@gentoo.org>
* interp.c (lookup_hash): Change SIGILL to GDB_SIGNAL_ILL.
(sim_resume): Change SIGBUS/SIGSEGV to GDB_SIGNAL_BUS, SIGILL to
GDB_SIGNAL_ILL, and SIGTRAP to GDB_SIGNAL_TRAP.
2015-04-01 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_set_profile, sim_set_profile_size): Delete.
2015-03-31 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (simops.o): New rule.
2015-03-30 Mike Frysinger <vapier@gentoo.org>
* d10v_sim.h (text, text_start, text_end, prog_bfd): Delete.
(SEXT8, SEXT16, SEXT32, MASK32): Undefine.
* interp.c: Delete run-sim.h and d10v_sim.h includes. Include
sim-main.h and sim-options.h.
(myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd,
text, text_start, text_end, decode_pc, sim_set_profile,
sim_set_profile_size, sim_set_trace, sim_set_callbacks,
sim_trace, sim_do_command, sim_load): Delete.
(INLINE): Delete define.
(free_state): New function.
(trace_sd): Declare global variable.
(sim_open): Rewrite to use new common logic.
(sim_close): Delete body.
* Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete.
(SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
* sim-main.h: New file.
* simops.c: Change d10v_sim.h include to sim-main.h.
(trace_input_func): Rewrite pc checks to use trace_sd.
2015-03-30 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
* interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
(sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code.
2015-03-30 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (gencode.o, d10v-opc.o): Add $(WARN_CFLAGS).
(gencode): Add $(BUILD_LDFLAGS).
* endian.c (get_word, get_longword, get_longlong, write_word,
write_longword, write_longlong): Convert old style prototypes.
* gencode.c: Include string.h.
(main): Convert old style prototype.
(write_header): Convert old style prototype and fix printf format.
(write_template, write_opcodes): Likewise.
(check_opcodes): Mark static void.
* interp.c: Include inttypes.h and run-sim.h.
(hash, lookup_hash, decode_pc, do_long, do_2_short, do_parallel,
add_commas, sim_size, sim_write, sim_read, sim_open, sim_close,
sim_set_profile, sim_set_profile_size, sim_stop, +sim_resume,
sim_info, sim_set_callbacks, sim_stop_reason, sim_fetch_register,
sim_store_register, sim_do_command, sim_load): Convert old style
prototypes.
(sim_create_inferior): Fix pointer cast to use uintptr_t.
* simops.c (strrchr): Delete prototype.
(trace_input_func): Mark name static.
(trace_input_func, trace_output_void, trace_output_flag): Convert old style
prototypes.
(OP_*): Convert old style prototypes.
2015-03-30 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (interp.o, simops.o, endian.o, table.o): Delete rules.
* configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT,
SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and
SIM_AC_OPTION_INLINE.
* config.in, configure: Regenerate.
* interp.c (sim_trace): Define.
2015-03-16 Mike Frysinger <vapier@gentoo.org>
* config.in, configure: Regenerate.
2015-03-14 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (SIM_EXTRA_CFLAGS): Add
-DSIM_USE_DEPRECATED_RUN_FRONTEND.
(SIM_RUN_OBJS): Set to run.o.
2015-03-14 Mike Frysinger <vapier@gentoo.org>
* configure.ac (AC_CHECK_HEADERS): Delete.
* aclocal.m4, configure: Regenerate.
2014-08-19 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
2014-08-15 Roland McGrath <mcgrathr@google.com>
* configure: Regenerate.
* config.in: Regenerate.
2014-03-10 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_do_command): Add const to cmd.
2014-03-05 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_load): Add const to prog.
2014-03-04 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate.
2013-09-23 Alan Modra <amodra@gmail.com>
* configure: Regenerate.
2013-06-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, configure: Regenerate.
2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
* configure: Rebuild.
2012-06-19 Joel Brobecker <brobecker@adacore.com>
* interp.c: #include "config.h" instead of "sysdep.h".
Add conditional include of string.h or strings.h, as well as
conditional include of stdlib.h.
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-03-24 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
2011-12-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: New file.
* configure: Regenerate.
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change include to common/acinclude.m4.
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
call. Replace common.m4 include with SIM_AC_COMMON.
* configure: Regenerate.
2010-04-14 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_write): Add const to buffer arg.
2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* configure: Regenerate.
2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* config.in: Regenerate.
* configure: Likewise.
* configure: Regenerate.
2008-07-11 Hans-Peter Nilsson <hp@axis.com>
* configure: Regenerate to track ../common/common.m4 changes.
* config.in: Ditto.
2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure: Regenerate.
2006-12-21 Hans-Peter Nilsson <hp@axis.com>
* acconfig.h: Remove.
* config.in: Regenerate.
2006-06-13 Richard Earnshaw <rearnsha@arm.com>
* configure: Regenerated.
2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
* configure: Regenerated.
2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
* configure: Regenerated.
2006-04-18 Nick Clifton <nickc@redhat.com>
* interp.c (sim_stop_reason): Fix typo.
2005-11-28 Mark Mitchell <mark@codesourcery.com>
* interp.c (gdb/signals.h): Include it.
(sim_stop_reason): Use TARGET_SIGNAL_*.
2005-03-23 Mark Kettenis <kettenis@gnu.org>
* configure: Regenerate.
2005-01-14 Andrew Cagney <cagney@gnu.org>
* configure.ac: Sinclude aclocal.m4 before common.m4. Add
explicit call to AC_CONFIG_HEADER.
* configure: Regenerate.
2005-01-12 Andrew Cagney <cagney@gnu.org>
* configure.ac: Update to use ../common/common.m4.
* configure: Re-generate.
2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
* configure: Regenerated to track ../common/aclocal.m4 changes.
2005-01-07 Andrew Cagney <cagney@gnu.org>
* configure.ac: Rename configure.in, require autoconf 2.59.
* configure: Re-generate.
2004-12-08 Hans-Peter Nilsson <hp@axis.com>
* configure: Regenerate for ../common/aclocal.m4 update.
2004-06-28 Andrew Cagney <cagney@gnu.org>
* interp.c (sim_resume): Rename ui_loop_hook to
deprecated_ui_loop_hook.
2003-10-30 Andrew Cagney <cagney@redhat.com>
* simops.c: Replace "struct symbol_cache_entry" with "struct
bfd_symbol".
2003-06-22 Andrew Cagney <cagney@redhat.com>
* interp.c (xfer_mem): Simplify. Only do a single partial
transfer. Problem reported by Tom Rix.
2003-05-07 Andrew Cagney <cagney@redhat.com>
* interp.c (sim_d10v_translate_addr): Add "regcache" parameter.
(sim_d10v_translate_imap_addr): Ditto.
(sim_d10v_translate_dmap_addr): Ditto.
(xfer_mem): Pass NULL regcache to sim_d10v_translate_addr.
(dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr.
(dmap_register, imap_register): Add "regcache" parameter.
(imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr.
(sim_fetch_register): Pass NULL regcache to imap_register and
dmap_register.
2003-02-27 Andrew Cagney <cagney@redhat.com>
* interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
2002-11-13 Andrew Cagney <cagney@redhat.com>
* simops.c: Include <string.h>.
2002-06-17 Andrew Cagney <cagney@redhat.com>
* d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum.
2002-06-16 Andrew Cagney <ac131313@redhat.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
2002-06-13 Tom Rix <trix@redhat.com>
* interp.c (xfer_mem): Fix transfers across multiple segments.
2002-06-09 Andrew Cagney <cagney@redhat.com>
* Makefile.in (INCLUDE): Update path to callback.h.
* gencode.c: Do not include "callback.h".
* d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
* interp.c: Ditto.
2002-06-08 Andrew Cagney <cagney@redhat.com>
* interp.c (sim_fetch_register): Fix name of enum used in cast.
(sim_store_register): Ditto.
2002-06-02 Elena Zannoni <ezannoni@redhat.com>
From Jason Eckhardt <jle@redhat.com>
* d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is
less than MOD_S (post-decrement).
2002-06-01 Andrew Cagney <ac131313@redhat.com>
* interp.c (sim_fetch_register, sim_store_register): Use a switch
statement and enums from "sim-d10v.h".
2002-05-28 Elena Zannoni <ezannoni@redhat.com>
* interp.c (sim_create_inferior): Add comment.
From Alan Matsuoka <alanm@redhat.com>:
From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
* simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
(OP_4401): Output "mvf0t" instead of "mf0t".
(OP_460B): Do not output a flag register.
(OP_4609): Do not output a flag register.
2002-05-23 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
2001-08-01 John R. Moore <jmoore@redhat.com>
* interp.c (sim_create_inferior): Removed a hack that stated
it was setting r0/r1 with argc/argv.
2001-04-15 J.T. Conklin <jtc@redback.com>
* Makefile.in (simops.o): Add simops.h to dependency list.
Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_resume): Deliver SIGILL.
(lookup_hash): Do not print SIGILL message.
Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com>
* Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT.
* interp.c (sim_set_trace): Replace sim_trace. Enable tracing.
Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (SIG_D10V_BUS): Define.
* simops.c (address_exception): Delete function.
(OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to
address_exception with code that sets SIG_D10V_BUS.
* interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus
error to the simulator before resuming execution.
(sim_trace): Check stop reason and use that to determine sim_trace
return value.
(sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV
sigrc.
Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com>
* interp.c (sim_create_inferior): Change internal initial value for
DMAP2 to 0x2000.
Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (lookup_hash): Stop the update of the PC when there was
an illegal instruction exception.
Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (address_exception): New function.
(OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000,
OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800,
OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00,
OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st"
and "st2w" check that the address is aligned.
1999-12-30 Chandra Chavva <cchavva@cygnus.com>
* d10v_sim.h (INC_ADDR): Added code to assign
proper address for loads with predec operations.
1999-11-25 Nick Clifton <nickc@cygnus.com>
* simops.c (OP_4E0F): New function: Simulate new bit pattern for
cpfg instruction.
Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (move_to_cr): Don't allow user to set PSW.DM in either
DPSW and BPSW.
Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5F20): Use SET_HW_PSW when updating PSW.
(PSW_HW_MASK): Declare.
* d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter.
(SET_CREG, SET_PSW_BIT): Update.
(SET_HW_CREG, SET_HW_PSW): Define.
Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP
for DMAP3.
Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_d10v_translate_addr): New function.
(xfer_mem): Rewrite. Use sim_d10v_translate_addr.
(map_memory): Make INLINE.
Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_d10v_translate_dmap_addr): New function.
(dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change
offset parameter to type uint16.
* d10v_sim.h (dmem_addr): Update declaration.
Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (imap_register, set_imap_register, dmap_register,
set_imap_register): Use map_memory.
(DMAP): Update.
(sim_create_inferior): Initialize all DMAP registers. NOTE that
DMAP2, in internal memory mode, is set to 0x0000 and NOT
0x2000. This is consistent with the older d10v boards.
Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_d10v_translate_imap_addr): New function.
(imem_addr): Rewrite. Use sim_d10v_translate_imap_addr.
(last_from, last_to): Declare.
Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (struct d10v_memory): Define. Support very long
memories.
(struct _state): Replace imem, dmem and umem by mem.
(IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS,
DMEM_SEGMENTS, UMEM_SEGMENTS): Define.
* interp.c (map_memory): New function.
(sim_size, xfer_memory, imem_addr, dmem_addr): Update.
(UMEM_SEGMENTS): Moveed to "d10v_sim.h".
(IMEM_SIZEDMEM_SIZE): Delete.
Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c: Include "sim-d10v.h".
(imap_register, set_imap_register, dmap_register,
set_dmap_register, spi_register, spu_register, set_spi_register,
set_spu_register): New functions.
(sim_create_inferior): Update.
(sim_fetch_register, sim_store_register): Rewrite. Use enums
defined in sim-d10v.h.
* d10v_sim.h (DEBUG_MEMORY): Define.
(IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete.
Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Allow a debug value to be passed to the -t
option.
(lookup_hash): Don't exit on an illegal instruction.
(do_long, do_2_short, do_parallel): Check for failed instruction
lookup.
Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
* simops.c (OP_3220): Fix trace output for illegal accumulator
message.
1999-09-14 Nick Clifton <nickc@cygnus.com>
* simops.c: Disable setting of DM bit in PSW.
Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com>
* simops.c (op_types): Added new memory indirect type OP_MEMREF3.
(trace_input_func): Added support for OP_MEMREF3.
(OP_32010000): New instruction ld.
(OP_33010000): New instruction ld2w.
(OP_5209): New instruction sac.
(OP_4209): New instruction sachi.
(OP_3220): New instruction slae.
(OP_36010000): New instruction st.
(OP_37010000): New instruction st2w.
1999-09-09 Stan Shebs <shebs@andros.cygnus.com>
* interp.c (old_segment_mapping): New global.
(xfer_mem): Change the default segment mapping to be the way
that Mitsubishi prefers, but use the previous mapping if
old_segment_mapping is true.
(sim_open): Add an option -oldseg to get the old mapping.
(sim_create_inferior): Init mapping registers based on the
value of old_segment_mapping.
1999-09-07 Nick Clifton <nickc@cygnus.com>
* simops.c (OP_6601): Do not write back decremented address if
either of the destination registers was the same as the address
register.
(OP_6201): Do not write back incremented address if either of the
destination registers was the same as the address register.
Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
1999-05-08 Felix Lee <flee@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
1999-04-02 Keith Seitz <keiths@cygnus.com>
* interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK
defined).
(sim_resume): If the counter has expired, call the ui_loop_hook,
if defined.
(UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of
ui_loop_hook calls.
* Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK.
Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com>
* simops.c: If load instruction with auto increment/decrement
addressing is used when the destination register is the same as
the address register, then ignore the auto increment/decrement.
Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com>
* simops.c (OP_5F00): Ifdef SYS_stat case because
not all systems have it defined.
1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
* simops.c (OP_5607): Correct saturation comparison/assignment.
(OP_1201, OP_1203, OP_17001200, OP_17001202,
OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201,
OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto.
1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com)
* simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation
comparison.
(OP_5607): Ditto.
(OP_2A00): Ditto.
(OP_2800): Ditto.
1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com)
* simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation
comparison.
Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (sys/syscall.h): Include targ-vals.h instead.
(SYS_*): Replace with TARGET_SYS_*.
* Makefile.in: Add dependency on targ-vals.h.
(NL_TARGET): Define as NL_TARGET_d10v.
Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com>
* interp.c (xfer_mem): Missing break, instruction memory case
flowed into unified memory case.
Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com>
* simops.c: If load instruction with auto increment/decrement
addressing is used when the destination register is the same as
the address register, then ignore the auto increment/decrement.
Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com>
* acconfig.h: New file.
* configure.in: Reverted change of Apr 24; use sinclude again.
Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com>
* configure.in: Don't call sinclude.
Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com>
* interp.c (struct hash_entry): OPCODE and MASK are unsigned.
* d10v_sim.h (remote-sim.h, sim-config.h): Include.
Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (trace_input_func): Use move_from_cr / CREGS to obtain
up-to-date CR value.
(OP_OP_1000000, add3): Trace inputs before performing add.
(OP_5F00, <*>): Trace input registers before making system call.
(OP_5F00, <kill>): Trace R0, R1 not REGn.
(OP_5F00, <getpid>): Always return 47.
* d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND,
SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write
back slots.
(struct _state): Add struct slot slot to global state variable.
(struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST,
F0, F1, C from global State variable.
(struct _state): Add struct trace to global State variable.
(GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND.
(PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG.
(CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr.
(INC_ADDR): Re-implement. Use SET_GPR to update registers.
(JMP): Re-implement. Use SET_* to update registers.
* interp.c: Use new SET_* et.al. macros to fetch / store
registers.
(get_operands): Squirrel away trace values at start of each
operand decode.
(do_2_short): Flush pending writes before issuing second
instruction.
(sim_resume): Flush pending writes at end of instruction cycle.
(sim_fetch_register, sim_store_register, sim_create_inferior):
After scheduling updates to registers using SET_*, flush updates.
(sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so
that each sets pc using SET_* and last SET_* eventually winds out.
* simops.c: Use new SET_* et.al. macros to fetch / store
registers.
(move_to_cr): Add MASK argument for selective update of CREG bits.
Re-implement using new SET_* macros.
(trace_output_func, trace_output): Delete. Replace with.
(do_trace_output_flush, trace_output_finish, trace_output_40,
trace_output_32, trace_output_16, trace_output_void,
trace_output_flag): New functions. Handle specific trace cases.
(OP_*): Re-write tracing to use new trace_output_* functions.
(OP_*): Re-write to use new SET_* et.al. macros.
(FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition.
(RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32.
Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure.in (SIM_AC_OPTION_WARNINGS): Add.
configure: Re-generate.
Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_store_register, sim_fetch_register): Pass in
length parameter. Return -1.
Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com>
* (dmem_addr): If address is illegal or in I/O space, signal a bus
error. Allocate unified memory on demand. Fix DMEM address
calculations.
Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5F20): Implement "dbt".
(OP_5F60): Implement "rtd".
* d10v_sim.h (DPC_CR): Define enum.
(DBT_VECTOR_START): Define
(DPSW, DPC): Define.
Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according
to PSW:SM.
* d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU.
(SP_IDX): Define.
Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5F00): Call error instead of abort for unknown
syscalls.
* d10v_sim.h (enum): Define DPSW_CR.
* simops.c (move_to_cr): Mask out hardwired zero bits in DPSW.
Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_write_phys): Delete.
(sim_load): Call sim_load_file with sim_write and LMA.
Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c: Rewrite xfer_mem so that it translates addresses as -
0x00... - DMAP translated memory, 0x01... IMAP translated memory,
0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified
memory.
(pc_addr): Delete.
(imem_addr): New function - translate IMEM address.
(sim_resume): Use imem_addr to translate insn address, abort if
translation failed.
(sim_create_inferior): Write ARGV to memory using sim_write. Pass
argc/argv using r0/r1 not r2/r3.
(sim_size): Do not initialize IMAP/DMAP here.
(sim_open): Call sim_create_inferior and sim_size to initialize
the system.
(sim_create_inferior): Initialize IMAP/DMAP to hardware reset
defaults.
(init_system): Delete.
(xfer_mem, sim_fetch_register, sim_store_register): Do not call
init_system.
(decode_pc): Check prog_bfd is defined before looking up .text
section.
Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com>
* interp.c (sim_stop_reason): Exit status is now in r0, not r2.
Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com>
* d10v_sim.h (DEBUG_TRAP): New debug flag.
* simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into
printing the registers.
Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com>
* simops.c (op_types): New ABI, args are r0..r3, system call # is
in r4.
(trace_{in,out}put_func): Ditto.
(OP_4900): Ditto.
(OP_24800000): Ditto.
(OP_4D00): Ditto.
(OP_5F00): Ditto.
Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com>
* interp.c (UMEM_SEGMENTS): New define, set to 128.
(sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
(sim_close): Reset prog_bfd to NULL after closing it. Also
reset prog_bfd_was_opened_p after closing prog_bfd.
(sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
(sim_create_inferior): Get start address from abfd not prog_bfd.
(xfer_mem): Do bounds checking on addresses and return zero length
read/write on bad addresses, rather than aborting. Prepare to
be able to handle xfers that cross segment boundaries, but not
yet implemented. Only emit debug message when d10v_debug is
set as well as DEBUG being defined.
Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR.
(BPSW): Ditto for BPSW_CR and not PSW_CR.
* simops.c (OP_5F40): JMP to BPC instead of assigning PC directly.
Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change
reserved trap from 0 to 15. Add trap emulation code for 0-14.
* interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check
IBA for SDBT.
* d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START,
SDBT_VECTOR_START, TRAP_VECTOR_START): Define.
* simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW,
use move_to_cr.
(OP_5F00): For "trap", update BPSW with move_to_cr.
Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (enum): Enumerate CR register names.
(enum): Enumerate PSW bit values.
(PSW): Obtain value uing move_from_cr.
(MOD_S, MOD_E, BPSW): Make r-values.
(move_from_cr, move_to_cr): Declare functions.
* interp.c (sim_fetch_register, sim_store_register): Use
move_from_cr and move_to_cr for CR register transfers.
* simops.c (move_from_cr, move_to_cr): New functions.
(OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr.
(OP_5600): For "mvtc", use function move_to_cr.
(OP_5200): For "mvfc", use function move_from_cr.
Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the
LSbit is zero.
Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (struct _state): Add DM - PSW debug mask.
* simops.c (OP_5600): For "mvtc", save PSW.DM.
(OP_5200): Ditto for "mvfc".
Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h (SEXT56): Define.
* simops.c (OP_4201): For "rac", sign extend 56 bit value before
it is shifted.
* d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
SIGNED64 macro.
Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com>
* interp.c (sim_resume): Call do_2_short with LEFT_FIRST or
RIGHT_FIRST, as appropriate, instead of hardcoded ints that
don't match enum values.
Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_3A00): For "macu", perform multiply stage using 32
bit rather than 16 bit precision.
(OP_3C00): For "mulxu", store unsigned product in ACC.
(OP_3800): For "msbu", subtract unsigned product from ACC,
(OP_0): For "sub", compute carry by comparing inputs.
Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_1000): For "sub2w", compute carry by comparing
inputs.
Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract,
carry indicated by value > 0xffff.
Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_resume): Don't set up SIGINT handler using signal,
handled by client.
(sim_resume): Fix race condition of a direct assignment to
stop_simulator, conditionally call sim_stop.
(sim_stop_reason): Check stop_simulator returning SIGINT. Clear
stop_simulator ready for next sim_resume call.
(sim_ctrl_c): Delete function.
Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_resume): For "REP", only check/update the PC when
a branch instruction has not been executed.
Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign
extend bit 44 all constants.
(OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro.
Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
* d10v_sim.h: Include sim-types.h.
(uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef
using unsigned8 et.al. from sim-types.h.
(SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with
SIGNED64 macro.
Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_write_phys): New function, write to physical
instead of virtual memory.
* interp.c (sim_load): Pass lma_p and sim_write_phys to
sim_load_file.
Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com>
* simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move
exception generation code to OP_6E01.
(OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception
generation code.
Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com>
* simops.c (OP_6401): postdecrement on r15 is OK, remove exception.
(OP_6601): Ditto.
Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com>
* interp.c (pc_addr): Discard upper bit(s) of PC in case
IMAP1 selects unified memory.
* d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing
for end condition.
Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com>
* interp.c (sim_resume): Increment PC at end of rep
loop.
* simops.c (OP_4201): Fix rachi instruction.
Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_kill): Delete.
(sim_create_inferior): Add ABFD argument.
(sim_load): Move setting of PC from here.
(sim_create_inferior): To here.
(start_address): Delete variable.
Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add ABFD argument.
Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_open): Add callback argument.
(sim_set_callbacks): Remove SIM_DESC argument.
Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): Undo patch to add -E support.
Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
* interp.c (sim_stop): New function.
Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (SIM_OBJS): Add sim-load.o.
* d10v_sim.h (exec_bfd): Rename to prog_bfd.
* interp.c: #include bfd.h.
(myname, sim_kind, start_address): New static locals.
(prog_bfd_was_opened_p, prog_bfd): New static locals.
(decode_pc): Update to use prog_bfd.
(sim_open): Set sim_kind, myname. Ignore -E arg.
(sim_close): Close prog_bfd if simulator opened it.
(sim_create_inferior): Return SIM_RC. Delete arg start_address.
(sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
Call sim_load_file to load file into simulator.
* simops.c (trace_input_func): exec_bfd renamed to prog_bfd.
Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com>
* simops.c (OP_5F00): Only provide system calls SYS_execv,
SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host.
Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
* config.in: Ditto.
Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c (sim_open): New arg `kind'.
* configure: Regenerated to track ../common/aclocal.m4 changes.
Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Regenerated to track ../common/aclocal.m4 changes.
Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
* configure: Re-generate.
Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
* configure: Regenerate to track ../common/aclocal.m4 changes.
* simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same
as trap 0, which will be deprecated. Only set errno, if an error
in fact was returned.
Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com>
* interp.c: Delete redundant prototypes of sim_foo fns.
(sim_open): New SIM_DESC result. Argument is now in argv form.
(other sim_*): New SIM_DESC argument.
Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com>
* simops.c (trace_{input,output}_func): Call flush_stdout from the
callback functions.
(OP_5F00): Ditto.
(OP_6{4,6,C,A}01): Test for post decrement on the stack pointer.
(OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in
setting the carry bit after an add or a subtract.
Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com>
* simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom
40 bits of accumulators. Sign/zero extend as appropriate.
Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (@COMMON_MAKEFILE_FRAG): Use
COMMON_{PRE,POST}_CONFIG_FRAG instead.
* configure.in: sinclude ../common/aclocal.m4.
* configure: Regenerated.
Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
* configure configure.in Makefile.in: Update to new configure
scheme which is more compatible with WinGDB builds.
* configure.in: Improve comment on how to run autoconf.
* configure: Re-run autoconf to get new ../common/aclocal.m4.
* Makefile.in: Use autoconf substitution to install common
makefile fragment.
Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com)
* gencode.c: patch to not #include "d10v_sim.h" which
unecessarily includes bfd.h and causes wingdb configure
to fail.
Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* interp.c (xfer_mem): Change unified memory to 0x0.
Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_3E01): Fix tracing information.
(OP_300{0,1}): Do not propigate sign.
Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com>
* config.in (WORDS_BIGENDIAN): Add.
* configure: Regenerated.
* d10v_sim.h: #include "config.h"
Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* gencode.c (write_opcodes): Eliminate warnings when generated
table.c is compiled.
Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* interp.c (sim_open): Cast result of calloc, and make sure NULL
was not returned.
(dmem_addr): If address is illegal or in I/O space, signal a bus
error.
(pc_addr): Signal bus error, not illegal instruction for bogus
pc.
Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in: Delete all stuff moved to ../common/Make-common.in.
(SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define.
* configure.in: Simplify using macros in ../common/aclocal.m4.
Call AC_CHECK_HEADERS(unistd.h).
* configure: Regenerated.
* config.in: New file.
* interp.c: #include "callback.h".
* simops.c: #include "config.h". #include <unistd.h> if present.
Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-sim.h (simops): Add flag is_long.
(State): Add pc_changed. Instructions which update the PC should
use the JMP macro which sets this.
(JMP): New macro. Sets the PC and the pc_changed flag.
* gencode.c (write_opcodes): Add is_long field.
* interp.c (lookup_hash): If we blindly apply a short opcode's mask
to a long opcode we could get a false match. Check the opcode size.
(hash): Add a size field to the hash table.
(sim_open): Initialize size field in hash table.
(sim_resume): Change to logic for setting the PC. Used to increment the
PC if it had not been changed. This didn't allow single-instruction loops.
Now checks the flag State.pc_changed. Also now stops when ^C is received.
(dmem_addr): Fix translation of data segments to unified memory.
(sim_ctrl_c): New function. When ^C is received, set stop_simulator flag.
* simops.c: Changed all branch and jump instructions to use new JMP macro.
(OP_20000000): Corrected trace information to show this is a ldi.l, not
a ldi.s instruction.
Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* interp.c (sim_fetch_register, sim_store_register): Fix bug where
updating the accumulators was overwriting other parts of the global
State variable.
Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* interp.c (bfd.h) Don't include it here any more.
(text{,_start,_end}): Move here from simops.c and make extern.
(decode_pc): New function to return the PC as an address that the
debugger can use.
(dmem_addr): Print decoded PC in error message.
(pc_addr): Ditto.
* simops.c (bfd.h) Don't include it here any more.
(text{,_start,_end}): Move to simops.c.
(trace_input_func): Move decoding of PC, and looking up .text
start to decode_pc.
* d10v_sim.h (bfd.h): Include it here.
(text{,_start,_end}): Add external declarations.
(exec_bfd): Ditto.
(decode_pc): Ditto.
Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* interp.c (sim_size): Now allocates unified memory for imap segments
0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0.
(sim_write): Just call xfer_mem().
(sim_read): Just call xfer_mem().
(xfer_mem): New function. Does appropriate memory mapping and copies bytes.
(dmem_addr): New function. Reads dmap register and translates data
addresses to local addresses.
(pc_addr): New function. Reads imap register and computes local address
corresponding to contents of the PC.
(sim_resume): Change to use pc_addr().
(sim_create_inferior): Change reinitialization code. Also reinitializes
imap[01] and dmap.
(sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
(sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap.
* simops.c (MEMPTR): Redefine to use dmem_addr().
(OP_5F00): Replace references to STate.imem with dmem_addr().
* d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128].
(RB,SW,RW,SLW,RLW): Redefine to use dmem_addr().
(IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define.
Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* d10v_sim.h (_ins_type): Reorganize, so that we can provide
better statistics, like not counting NOPS as parallel
instructions, and printing total cycles.
(ins_type_counters): Make unsigned long.
(left_nops,right_nops): Fold into ins_type_counters.
* simops.c (trace_input_func): Print new instruction types.
Handle OP_R2R3 as input types.
(OP_{38000000,7000}): Correctly sign extend bytes.
(OP_5E00): Don't count NOPs as parallel instructions.
(OP_460B): Remove unused variable.
(OP_5F00): Ditto.
* interp.c (ins_type_counters): Make unsigned long.
(left_nops,right_nops): Delete.
(most functions): Add prototypes.
(INLINE): If GCC and optimize define as __inline__.
({,lookup_}hash,get_operands): Declare as INLINE.
(do_parallel): Count conditional operations.
(add_commas): New function, to add commas every 3 digits.
(sim_size): Call add_commas to print numbers.
(sim_{open,resume}): Delete unused variables.
(sim_info): Provide better statistics.
(sim_read): Add int return type.
Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* interp.c (sim_resume): Change the way single-stepping and exceptions
are handled so single-stepping works again.
Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* endian.c: Optimize simulated loads/stores on x86, AIX, and big
endian hosts.
* configure.in (--enable-sim-bswap): New switch to enable using
the BSWAP instruction on x86's.
* configure: Regenerate.
* Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap
support.
Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* endian.c: New file. Move endian functions here from interp.c.
Optimize code, and make it work as either inline functions or as a
separate file.
* interp.c: Move endian functions from here to endian.c.
* Makefile.in (INCLUDE): Add endian.c.
(run,libsim.a): Add dependency on endian.o.
(endian.o): Add dependency.
* d10v_sim.h (read/write support): Always go through the machine
independent endian functions. If compiling with GCC and
optimizing, include endian.c so the endian functions are inlined.
* simops.c (OP_5F00): Correct tracing of accumulators.
Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_5F00): Add support for getpid, kill system calls.
* interp.c (do_{2_short,parallel}): If an exception is raised,
don't execute the second instruction.
Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_{31000000,6601,6201,6200}): Store address in a
temporary in case the register is overriden when loading.
(OP_6200): Output type is OP_DREG for tracing.
Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* d10v_sim.h (struct _state): Add mem_{min,max} fields.
* interp.c (sim_size): Initialize mem_{min,max} fields.
(sim_write): Update mem_{min,max} fields.
(sim_resume): If PC is not in the minimum/maximum memory range,
abort.
(sim_create_inferior): Preserve mem_{min,max} fields.
Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com>
* simops.c (OP_5F00): Add support for time() system call.
Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being
stored if tracing.
(OP_5F00,trace_{in,out}put_func): Add finer grain tracing for
system calls.
Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (op_types): Add OP_{CONSTANT8,R2,R3}.
(trace_input_func): Add support for OP_{CONSTANT8,R2,R3}.
(OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3
to call/subroutine returns to trace the first two arguments and
the return value. For small jumps, use CONSTANT8, not CONSTANT16.
Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* interp.c (sim_create_inferior): Reinitialize State every time
sim_create_inferior() is called.
Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net>
* simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right
on comparisons.
(OP_401): Fix tracing information.
Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output.
(trace_input_func): Use them.
(trace_input_func): Make sure there is a trailing space after the
instruction.
(OP_6200): Fix tracing info.
* Makefile.in (run): Add dependencies on libbfd.a and
libiberity.a.
Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line
numbers and function names in debug trace.
(DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and
DEBUG_LINE_NUMBER.
(SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction
and exit system call trap being executed.
* interp.c (sim_stop_reason): Set exit code correctly for stop
instruction and exit system call trap.
* configure.in (--enable-sim-cflags): Remove trace case.
(--enable-sim-debug): New switch to set the debug values.
* configure: Regenerate.
* simops.c (trace_{input,output}_func): Rename from
trace_{input,output}.
(trace_{input,output}): Call trace_{input,output}_func if
d10v_debug is non-zero.
(SIZE_INSTRUCTION): Cut down to 8.
(SIZE_OPERANDS): Cut down to 18.
(SIZE_LOCATION): New value for size of line number, function name
field.
(init_text_p,text{,_start,_end}): New static variables for
printing line number and function name.
(exec_bfd): New external that run.c sets.
(trace_input_func): Print line number and function name if
available and if desired.
(OP_4E09): Don't print out DBT message.
(OP_5FE0): Set exception field to SIG_D10V_STOP.
(OP_5F00): Set exception field to SIG_D10V_EXIT.
Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* interp.c (do_2_short): If the instruction encodes jump->ins,
don't do the second instruction if the jump succeeds.
Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_5F00): Use unknown traps to print all GPRs,
accumulators, PC, and F0/F1/C flags.
Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com>
* simops.c (OP_5F00): Fix problems with system calls.
Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_5F00): Correct tracing information for trap.
Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* Makefile.in (CSEARCH): Correctly find opcodes directory.
Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (trace_output): Properly align accumulator output.
(OP_3{0,2,4}00): Properly parenthesize test expression. Add error
if shift count is too high.
(OP_4E{00,02,04,20,22,40,42}): Make tests agree with book.
(OP_4E09): Make cpfg properly trace the input flags.
(op_types): Add OP_FLAG_OUTPUT.
(trace_{input,output}): Support OP_FLAG_OUTPUT.
(OP_31000000): This ld2w varient is a 16-bit memory reference, not
an 8-bit memory reference instruction for tracing purposes.
(OP_201): Addi needs to set the carry.
Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* simops.c (OP_2600, OP_2601): Changed min and max comparisons
to use signed register values.
Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* d10v_sim.h (DEBUG_*): Add bit flags for controlling debug
output.
(_ins_type): New enumeration to specify which container an
instruction is in, and whether it is part of a parallel operation.
(_state): Add ins_type field.
({,u}int{8,16,32,64}): Use limits.h to size the appropriate types.
(ins_type_counters): Counters for the various instruction types.
({left,right}_nops): Counters for the number of nops in each
container.
(d10v_debug): New variable to indicate whether debugging is turned
on.
* simops.c: (all functions): Change all #ifdef DEBUG code so that
the input and output values can be traced, along with the
instruction type. Make the -t option enable tracing.
(all functions): Change printf calls to use the printf_filtered
function in the callback table.
* interp.c (_leftright): New enumeration to say whether 2 short
instructions are done left first or right first.
(do_{long,2_short,parallel}): Indicate in the machine state which
type of instruction this is. Count each of the types of
instructions executed.
(sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug
flag is set.
(sim_resume): Pass left/right indication to do_2_short.
(all functions): Change printf calls to use the printf_filtered
function in the callback table.
(sim_trace): Turn on debug flag if DEBUG was defined, and call
sim_resume.
(sim_info): Print out statistics on instructions.
(sim_{trace,create_inferior}): Eliminate extraneous output unless
debugging.
(sim_open): If args == -t and DEBUG was defined, set d10v_debug.
Only initialize the hash table the first time sim_open is called.
* Makefile.in: Make objects depend on d10v_sim.h.
({,SIM_}CFLAGS): Include configure dependent switches. Setting
CFLAGS does not override host/target defines or SIM_CFLAGS.
(CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode.
(run): By default, the math library is not needed to be linked
in.
({BFD,LIBIBERTY}_LIB): Define as variables so they can be
overridden.
(VPATH): Don't set to anything but @srcdir@ to work with non-GNU
makes.
({run,callback}.o): Provide explicit paths to their appropriate
source directories.
(gencode{,.o},d10v-opc.o): Split compilation into creating object
and linking. Instead of linking in libopcodes.a, just compile
d10v-opc.o directly to handle canadian cross.
(CSEARCH): Add opcodes directory.
* configure.in (--enable-sim-cflags): New switch to allow user to
set the defaults.
(CC_FOR_BUILD): Deal with canadian crosses.
* configure: Regenerate.
Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com>
* simops.c: Include correct syscall.h for d10v, not host's.
Fix #ifdef SYS_stat.
Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef.
Add trap 2 to be printf and trap 3 to be putchar.
Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com>
* Makefile.in, d10v_sim.h, interp.c, simops.c: Add support
for low-level system calls.
Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems.
Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v_sim.h (SEXT32): Added.
* interp.c: Commented out printfs.
* simops.c: Fixed error in sb and st2w.
Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining
DSP instructions. Added modulo addressing.
Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot.
Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v_sim.h, simops.c: Snapshot.
Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h,
gencode.c, interp.c, simops.c: Created.