darkkirb/old-cross-binutils
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
old-cross-binutils/gdb/testsuite/ChangeLog
Jan Kratochvil 775a3298dc Fix gdb.arch/i386-biarch-core.exp FAIL on i386. 
This new test fails on i686 buildbot slaves,

(gdb) core-file /home/gdb-buildbot-2/fedora-x86-64-2/fedora-i686/build/gdb/testsuite/gdb.arch/i386-biarch-core.core
"/home/gdb-buildbot-2/fedora-x86-64-2/fedora-i686/build/gdb/testsuite/gdb.arch/i386-biarch-core.core"
is not a core dump: File format not recognized
(gdb) FAIL: gdb.arch/i386-biarch-core.exp: core-file

There are two problems:

(1) The testcase did not really test if elf64-i386 is supported by GDB (BFD).
That was OK for a Fedora testcase but I forgot about it when submitting it
upstream.

I haven't really verified if the GNU target is elf64-little but it seems so,
no other one seems suitable from:
	elf32-x86-64
	elf64-big
	elf64-k1om
	elf64-l1om
	elf64-little
	elf64-x86-64
	pei-x86-64

(2) The output of the "core-file" command itself can be arbitrary as the
elf64-i386 file with x86_64 registers is really broken; but that does not
matter much, important is the following test whether core file memory is
readable.
	./configure --enable-64-bit-bfd
	(gdb) core-file /home/jkratoch/redhat/gdb-test-build32-plus64/gdb/testsuite/gdb.arch/i386-biarch-core.core^M
	warning: Couldn't find general-purpose registers in core file.^M
	Failed to read a valid object file image from memory.^M
	warning: Couldn't find general-purpose registers in core file.^M
	#0  <unavailable> in ?? ()^M
	(gdb) FAIL: gdb.arch/i386-biarch-core.exp: core-file
	x/i 0x400078^M
	   0x400078:    hlt    ^M
	(gdb) PASS: gdb.arch/i386-biarch-core.exp: .text is readable

I do not know much dejagnu but I expect 'istarget' tests against the site.exp
'target_triplet' content which is set to the primary GDB target
(--target=...).

GDB is normally never configured for primary target elf64-i386, I think BFD
does not know such explicit target, it gets recognized as elf64-little.

In fact many testfiles of the GDB testsuite are wrong as they require
'istarget' (therefore primary GDB target) even for just loading arch specific
files which would be sufficient with secondary target (--enable-targets=...)
support.

This my new patch removes this 'istarget' check as it is IMO unrelated to what
we need to test.  Although you are right we do 'x/i' and test for 'hlt' so
I think we should test also for available 'set architecture i386'.
We could also test by 'x/bx' instead of 'x/i' to avoid such additional
test/requirement.

This testcase comes from a different bug from 2009:
	https://bugzilla.redhat.com/show_bug.cgi?id=457187
	http://pkgs.fedoraproject.org/cgit/gdb.git/commit/?id=94cd124608bf0dd359cb48a710800d72c21b30c3

That bug has been fixed in the meantime but the same testcase was reproducing
this new different bug - internal error regression - so I submitted it.

We can remove the "x/bx $address" test but it was useful for the previous bug
from 2009 as that time the internal error regression did not happen, just the
core file was not recognized (which would not be detected by the proposed
ignoring of the "core-file" command output) and so the core file was not
available.  That can be tested by the "x/bx $address" test.

gdb/testsuite/ChangeLog
2015-07-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

	* gdb.arch/i386-biarch-core.exp: Replace istarget
	by "complete set gnutarget". Remove expectation for the "core-file"
	command.
2015-07-16 18:01:22 +02:00

5351 lines
171 KiB
Text
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2015-07-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-biarch-core.exp: Replace istarget
by "complete set gnutarget". Remove expectation for the "core-file"
command.
2015-07-15 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous commit:
Tests for validate symbol file using build-id.
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Tests for validate symbol file using build-id.
* gdb.base/solib-mismatch-lib.c: New file.
* gdb.base/solib-mismatch-libmod.c: New file.
* gdb.base/solib-mismatch.c: New file.
* gdb.base/solib-mismatch.exp: New file.
2015-07-15 Sandra Loosemore <sandra@codesourcery.com>
* gdb.base/sigaltstack.exp (finish_test): Add kfail for
nios2-*-linux*.
* gdb.base/sigbpt.exp (stepi_out): Likewise.
* gdb.base/siginfo.exp: Likewise.
* gdb.base/sigstep.exp (advance, advancei): Likewise.
2015-07-15 Pierre Langlois <pierre.langlois@arm.com>
* gdb.base/range-stepping.exp (gdb_range_stepping_enabled):
Move it to ...
* lib/range-stepping-support.exp (gdb_range_stepping_enabled):
... here.
* gdb.trace/range-stepping.exp: Check that the target supports
range stepping.
2015-07-14 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/i386-biarch-core.exp: Fix comment typo.
2015-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/killed-outside.exp: New file.
* gdb.base/killed-outside.c: New file.
2015-07-10 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.asm/asm-source.exp (f at main): Stop at gdbasm_enter.
(n at main): New.
* gdb.asm/asmsrc1.s: Add comment "mark: main enter".
2015-07-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/gnu_vector.exp: On x86 and x86_64 targets, skip the
infcall tests instead of setting up for KFAIL.
2015-07-10 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/record_goto-step.exp: New.
2015-07-08 Jan Kratochvil <jan.kratochvil@redhat.com>
PR compile/18484
* gdb.compile/compile.c (struct struct_type): Add volatile to
selffield's type.
* gdb.compile/compile.exp
(compile code struct_object.selffield = &struct_object): Skip further
struct_object tests if this one xfails.
2015-07-08 Robert O'Callahan <robert@ocallahan.org>
PR exp/18617
* gdb.trace/ax.exp: Add test.
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.arch/aarch64-atomic-inst.exp: Check is_aarch64_target
instead of istarget "aarch64*-*-*".
* gdb.arch/aarch64-fp.exp: Likewise.
* gdb.base/float.exp: Likewise.
* gdb.reverse/aarch64.exp: Likewise.
* lib/gdb.exp (is_aarch64_target): New proc.
2015-07-07 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (is_aarch32_target): New proc.
* gdb.arch/arm-bl-branch-dest.exp: Check is_aarch32_target
instead of "istarget "arm*-*-*"".
* gdb.arch/arm-disp-step.exp: Likewise.
* gdb.arch/thumb-bx-pc.exp: Likewise.
* gdb.arch/thumb-prologue.exp: Likewise.
* gdb.arch/thumb-singlestep.exp: Likewise.
* gdb.base/disp-step-syscall.exp: Likewise.
* gdb.base/float.exp: Likewise.
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch):
Set arch1, arch2, syscall1_name, syscall2_name and syscall_number.
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.multi/multi-arch-exec.exp: Set march1 and march2 to "" if target
is aarch64. If target is aarch64, set compiler=${ARM_CC_FOR_TARGET}
if it exists.
* gdb.multi/multi-arch.exp: Likewise.
2015-07-07 Simon Marchi <simon.marchi@ericsson.com>
* gdb.python/py-lazy-string.exp: Add missing parentheses to
print.
2015-07-07 Yao Qi <yao.qi@linaro.org>
* gdb.arch/thumb-singlestep.exp: Do one more single step.
2015-06-30 Martin Galvan <martin.galvan@tallertechnologies.com>
* lib/gdb.exp (test_class_help): Remove the unneeded escaping of
'[' and ']' characters.
2015-06-30 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/demangle.exp: Sync tests from libiberty testsuite.
2015-06-29 Pedro Alves <palves@redhat.com>
PR threads/18127
* gdb.threads/hand-call-new-thread.c: New file.
* gdb.threads/hand-call-new-thread.c: New file.
2015-06-26 Keith Seitz <keiths@redhat.com>
Doug Evans <dje@google.com>
PR 16253
* gdb.cp/var-tag-2.cc: New file.
* gdb.cp/var-tag-3.cc: New file.
* gdb.cp/var-tag-4.cc: New file.
* gdb.cp/var-tag.cc: New file.
* gdb.cp/var-tag.exp: New file.
2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/history-duplicates.exp: New test.
2015-06-26 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/completion.exp: Test the completion of the "focus"
command.
2015-06-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-prologue-skip.S: New file.
* gdb.arch/amd64-prologue-skip.exp: New file.
2015-06-25 Simon Marchi <simon.marchi@ericsson.com>
* gdb.python/py-prettyprint.exp (run_lang_tests): Add
is_address_zero_readable check.
2015-06-24 Peter Bergner <bergner@vnet.ibm.com>
* gdb.arch/powerpc-power.exp <rfebb>: Fixup test results.
* gdb.arch/powerpc-power.s <rfebb>: Likewise.
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
linux targets.
2015-06-24 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (supports_get_siginfo_type): New proc.
* gdb.base/siginfo-obj.exp: Invoke supports_get_siginfo_type.
* gdb.base/siginfo-thread.exp: Likewise.
2015-06-22 Yao Qi <yao.qi@linaro.org>
* boards/remote-gdbserver-on-localhost.exp: Add comments.
2015-06-22 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (skip_hw_breakpoint_tests): Return 0 for target
aarch64*-*-*.
(skip_hw_watchpoint_tests): Likewise.
2015-06-18 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/gdbinit-history.exp: Test the interaction between
setting GDBHISTSIZE and setting the history size via .gdbinit.
2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
PR gdb/16999
* gdb.base/gdbhistsize-history.exp: New test.
2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/gdbinit-history.exp: Replace occurrences of HISTSIZE
with GDBHISTSIZE.
* gdb.base/readline.exp: Likewise.
2015-06-17 Yao Qi <yao.qi@linaro.org>
* lib/gdb.exp (get_build_id): Move braces and "else" to the same
line.
2015-06-17 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/gdbinit-history.exp: Add test case to check that
an unlimited history file does not get truncated on exit.
2015-06-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/gnu_vector.c: Include stdarg.h and stdio.h.
(VECTOR): New macro. Use it...
(int4, uint4, char4, float4, int2, longlong2, float2, double2):
...for these typedefs.
(int8, char1, int1, double1): New typedefs.
(struct just_int2, struct two_int2): New structures.
(add_some_intvecs, add_many_charvecs, add_various_floatvecs)
(add_structvecs, add_singlevecs): New functions.
(main): Call add_some_intvecs twice.
* gdb.base/gnu_vector.exp: Drop GCC version check; just attempt
the compile and exit upon failure. Try compiling for the "native"
architecture. Test inferior function calls with vector arguments
and vector return value handling with "finish" and "return".
2015-06-10 Jon Turney <jon.turney@dronecode.org.uk>
* gdb.base/sepdebug.exp: Add EXEEXT where needed.
* lib/gdb.exp (get_build_id): Teach how to extract build-id from a
PE file.
* lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.
2015-06-12 Antoine Tremblay <antoine.tremblay@ericsson.com>
PR breakpoints/16465
* gdb.mi/mi-dprintf-pending.c: New file.
* gdb.mi/mi-dprintf-pending.exp: New test.
* gdb.mi/mi-dprintf-pendshr.c: New file.
2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
Mircea Gherzan <mircea.gherzan@intel.com>
* gdb.arch/i386-mpx-map.c: New file.
* gdb.arch/i386-mpx-map.exp: New File.
2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
* gdb.arch/i386-mpx.c (have_mpx): Indentation fixed.
* gdb.arch/i386-mpx.exp: Indentation fixed.
2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
* gdb.arch/i386-mpx.c: Added final return to the have_mpx
function and improved indentation.
* gdb.arch/i386-mpx.exp: Exchanging gdb_send and gdb_expect for
gdb_test_multiple. Added additional tests to skip the test.
2015-06-10 Walfred Tedeschi <walfred.tedeschi@intel.com>
* gdb.arch/i386-avx512.c: Change path in include file.
* gdb.arch/i386-avx512.exp: Change include dir path
compilation flag.
* gdb.arch/i386-mpx.c: Change path in include file.
* gdb.arch/i386-mpx.exp: Change include dir path compilation
flag.
2015-06-04 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-print.exp (compile print *vararray@3)
(compile print *vararrayp@3): Change xfail to kfail compile/18489.
2015-06-03 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile.exp (keep jit in memory): Rename to ...
(do not keep jit in memory): ... this.
(expect 5): Change it to ...
(expect no 5): ... this.
2015-06-02 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/15564
* gdb.mi/mi-detach.exp: New file.
2015-06-01 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/18392
* gdb.arch/amd64-tailcall-self.S: New file.
* gdb.arch/amd64-tailcall-self.c: New file.
* gdb.arch/amd64-tailcall-self.exp: New file.
2015-05-28 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-vfork.exp (main): Disable exec-dependent
tests for remote targets by checking is_target_gdbserver.
2015-05-27 Doug Evans <dje@google.com>
* gdb.dwarf2/opaque-type-lookup-2.c: New file.
* gdb.dwarf2/opaque-type-lookup.c: New file.
* gdb.dwarf2/opaque-type-lookup.exp: New file.
2015-05-26 Doug Evans <dje@google.com>
* gdb.cp/iostream.cc: New file.
* gdb.cp/iostream.exp: New file.
2015-05-26 Doug Evans <dje@google.com>
* gdb.dwarf2/dw2-op-call.exp: Update.
* gdb.dwarf2/dw4-sig-types.exp: Update.
* gdb.dwarf2/implptr.exp: Update.
* gdb.mi/mi-cmd-param-changed.exp: Update.
2015-05-26 Doug Evans <dje@google.com>
* gdb.python/py-lazy-string.c: New file.
* gdb.python/py-lazy-string.exp: New file.
* gdb.python/py-prettyprint.c (lazystring) <len>: New member.
(main): Update. Add estring3.
* gdb.python/py-prettyprint.exp: Add tests for strings at address 0.
* gdb.python/py-prettyprint.py (pp_ls): Handle length.
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
Yao Qi <yao.qi@linaro.org>
* gdb.reverse/aarch64.c: New.
* gdb.reverse/aarch64.exp: New.
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
* lib/gdb.exp (supports_process_record): Return true for aarch64*-linux*.
(supports_reverse): Likewise.
2015-05-22 Patrick Palka <patrick@parcs.ath.cx>
* gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
Use with_test_prefix.
2015-05-21 Andrew Burgess <andrew.burgess@embecosm.com>
* gdb.base/completion.exp: Add test for completion of layout
names.
2015-05-20 Andrew Burgess <andrew.burgess@embecosm.com>
* lib/gdb.exp (skip_tui_tests): New proc.
* gdb.base/tui-layout.exp: Check skip_tui_tests.
2015-05-19 Pedro Alves <palves@redhat.com>
* gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
Save the whole env array instead of just HOME. Unset HISTSIZE in
the environment while testing. Restore whole environment
afterwards.
2015-05-16 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-ports.c: New file.
* gdb.guile/scm-ports.exp: Add memory port tests.
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-print.c: New file.
* gdb.compile/compile-print.exp: New file.
2015-05-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-ops.exp: Cast param to void.
* gdb.compile/compile.exp: Complete type for _gdb_expr.
(compile code struct_object.selffield = &struct_object): Add xfail.
2015-05-15 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/arr_enum_with_gap: New testcase.
2015-05-15 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/byte_packed_arr: New testcase.
2015-05-15 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/pckd_neg: New testcase.
2015-05-13 Patrick Palka <patrick@parcs.ath.cx>
PR gdb/17820
* gdb.base/gdbinit-history.exp: New test.
* gdb.base/gdbinit-history/unlimited/.gdbinit: New file.
* gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-05-09 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-xmethods.cc: Enhance test case.
* gdb.python/py-xmethods.exp: New tests.
* gdb.python/py-xmethods.py (A_indexoper): New xmethod worker
function.
(B_indexoper): Likewise.
(global_dm_list) : Add new xmethod worker functions.
2015-05-08 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/coredump-filter.exp: Correctly unset
"coredump_var_addr" array.
2015-05-08 Pedro Alves <palves@redhat.com>
* gdb.server/non-existing-program.exp: Unset spawn_id.
2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
PR python/18291
* gdb.python/py-xmethods.exp: Add tests.
2015-05-08 Yao Qi <yao.qi@linaro.org>
PR gdb/18208
* gdb.base/coredump-filter.c (set_coredump_filter): New function.
* gdb.base/coredump-filter.exp (do_save_core): Call inferior
function set_coredump_filter, and remove remote_exec call.
Remove argument ipid. Callers update.
(top level): Don't get inferior's PID.
2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/watch_thread_num.exp: Skip test on targets without
access watchpoints.
2015-05-06 Pedro Alves <palves@redhat.com>
PR server/18081
* gdb.server/non-existing-program.exp: New file.
2015-05-05 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests.
2015-05-05 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/out_of_line_in_inlined: New testcase.
2015-05-05 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/var_rec_arr: New testcase.
2015-04-30 Yao Qi <yao.qi@linaro.org>
* gdb.base/break-idempotent.exp: If
skip_hw_watchpoint_multi_tests returns true, skip the tests
on "rwatch" and "awatch".
2015-04-30 Yao Qi <yao.qi@linaro.org>
* gdb.base/relativedebug.exp: Invoke gdb command
"info sharedlibrary", and if libc.so doesn't have debug info,
skip the test.
2015-04-29 Doug Evans <dje@google.com>
* gdb.python/py-xmethods.exp: Add ptype tests.
* gdb.python/py-xmethods.py (E_method_char_worker): Add
get_result_type method.
2015-04-29 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/watch-bitfields.exp: Switch to software watchpoints if
the target does not support hardware watchpoints.
2015-04-29 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/break-always.exp: Abort testing if writing to memory
causes an error.
2015-04-28 Doug Evans <dje@google.com>
* gdb.python/py-pp-maint.py: Move "replace" testing to ...
* gdb.python/py-pp-registration.exp: ... here. New file.
* gdb.python/py-pp-registration.c: New file.
* gdb.python/py-pp-registration.py: New file.
2015-04-28 Doug Evans <dje@google.com>
* gdb.python/py-bad-printers.c: New file.
* gdb.python/py-bad-printers.py: New file.
* gdb.python/py-bad-printers.exp: New file.
2015-04-28 Sasha Smundak <asmundak@google.com>
* gdb.python/py-type.exp: New test.
2015-04-28 Andy Wingo <wingo@igalia.com>
* gdb.python/py-parameter.exp:
* gdb.guile/scm-parameter.exp: Escape the path that we are
matching against, as it might contain characters that are special
to regular expressions.
2015-04-27 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/rec_comp: New testcase.
2015-04-26 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/coredump-filter.exp: Clear variable "coredump_var_addr"
before using it.
2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
* gdb.base/dump.exp: Add *.verilog files to all_files list. Add
new tests for verilog output.
2015-04-24 Yao Qi <yao.qi@linaro.org>
* boards/remote-gdbserver-on-localhost.exp: New file.
2015-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Use an indirect spawn id list holding
$inferior_spawn_id instead of $inferior_spawn_id directly. On
"end of file", remove $inferior_spawn_id from the indirect list.
2015-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Rename saw_eof to saw_end_of_file.
2015-04-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): Match eof/full_buffer/timeout
on $any_spawn_id instead of only on $gdb_spawn_id.
2015-04-21 Pierre Muller <muller@sourceware.org>
PR pascal/17815
* lib/pascal.exp (gpc_compile): Add new option "class".
(fpc_compile): Likewise.
* gdb.pascal/case-insensitive-symbols.pas: New file.
* gdb.pascal/case-insensitive-symbols.exp: New file.
2015-04-20 Gary Benson <gbenson@redhat.com>
* gdb.base/attach.exp: Fix three extended remote failures.
2015-04-17 Gary Benson <gbenson@redhat.com>
* gdb.server/server-exec-info.exp: Inhibit GDB from accessing
the main executable over the remote protocol.
2015-04-16 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
a new gdbserver if gdbserver_reconnect_p is set.
2015-04-16 Pedro Alves <palves@redhat.com>
* lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
is set, don't exit gdbserver.
2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
appropriate .insn, such that an older assembler can be used.
* gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
the z/Architecture instruction set on 31-bit targets as well.
2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.go/handcall.exp: Remove all logic related to the first
breakpoint and rely on go_runto_main instead.
* gdb.go/strings.exp: Likewise.
* gdb.go/unsafe.exp: Likewise.
* gdb.go/hello.exp: Likewise. Also rename the remaining
breakpoint marker to "breakpoint 1".
* gdb.go/handcall.go: Remove comment "set breakpoint 1 here".
* gdb.go/strings.go: Likewise.
* gdb.go/unsafe.go: Likewise.
* gdb.go/hello.go: Likewise. Also remove the second occurrence of
"set breakpoint 2 here" and rename the remaining breakpoint marker
to "breakpoint 1".
2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
* gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function
if itertools.imap is not present.
* gdb.python/py-objfile.exp: Add parentheses.
* gdb.python/py-type.exp: Same.
* gdb.python/py-unwind-maint.py: Same.
2015-04-15 Yao Qi <yao.qi@linaro.org>
* gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead
of ":$ptr_size" and set its form explicitly.
2015-04-15 Pedro Alves <palves@redhat.com>
Yao Qi <yao.qi@linaro.org>
* gdb.base/watch-bitfields.exp (test_watch_location): Increase
timeout by factor of 4.
(test_regular_watch): Likewise.
* gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* lib/gdb.exp (with_timeout_factor): New proc.
(gdb_expect): Move some code to ...
(get_largest_timeout): ... here. New procedure.
2015-04-14 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Reinstate correct test message.
2015-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/bp-permanent.exp (test): Handle the case of being unable
to write to the .text section.
2015-04-13 Luis Machado <lgustavo@codesourcery.com>
* gdb.base/coredump-filter.exp: Restrict test to Linux systems only.
Handle the case of targets that do not provide PID information.
2015-04-13 Yao Qi <yao.qi@linaro.org>
* lib/gdbserver-support.exp (gdb_exit): Catch exception
and use expect instead of gdb_expect.
2015-04-13 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/coredump-filter.exp: Rename variable "addr" to
"coredump_var_addr" to avoid naming conflict with other testcases.
2015-04-10 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Use
gdb_test_sequence and gdb_assert.
2015-04-10 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Use
test messages that don't include the breakpoint address.
2015-04-10 Yao Qi <yao.qi@linaro.org>
* gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): Return
false for some offset and width combinations which aren't
supported by linux kernel.
2015-04-10 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-lands-on-breakpoint.exp (do_test): New
procedure, factored out from ...
(top level): ... here. Add "set displaced-stepping" testing axis.
* gdb.threads/step-over-trips-on-watchpoint.exp (do_test): New
parameter "displaced". Use it.
(top level): Use foreach and add "set displaced-stepping" testing
axis.
2015-04-10 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-trips-on-watchpoint.c (child_function):
Remove comment.
* gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Find
both the address of the instruction that triggers the watchpoint
and the address of the instruction immediately after, and use
those addresses for the test. Fix comment.
2015-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/sigstep.exp (breakpoint_to_handler)
(breakpoint_to_handler_entry): New parameter 'displaced'. Use it.
Test "backtrace" in handler.
(breakpoint_over_handler): New parameter 'displaced'. Use it.
(top level): Add new "displaced" test axis to
breakpoint_to_handler, breakpoint_to_handler_entry and
breakpoint_over_handler.
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/18216
* gdb.threads/multiple-step-overs.exp: Remove expected eof.
2015-04-10 Yao Qi <yao.qi@linaro.org>
* gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc.
(test_add_rn_pc): New function.
* gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc.
(top level): Invoke test_add_rn_pc.
2015-04-10 Pedro Alves <palves@redhat.com>
PR gdb/13858
* gdb.base/step-over-no-symbols.exp: New file.
2015-04-09 Andy Wingo <wingo@igalia.com>
* gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled
after the Python tests.
2015-04-08 Keith Seitz <keiths@redhat.com>
PR python/16699
* gdb.python/py-completion.exp: New tests for completion.
* gdb.python/py-completion.py (CompleteLimit1): New class.
(CompleteLimit2): Likewise.
(CompleteLimit3): Likewise.
(CompleteLimit4): Likewise.
(CompleteLimit5): Likewise.
(CompleteLimit6): Likewise.
(CompleteLimit7): Likewise.
2015-04-08 Pedro Alves <palves@redhat.com>
PR gdb/18214
PR gdb/18216
* gdb.threads/multiple-step-overs.c (sigusr1_handler): New
function.
(main): Install it as SIGUSR1 handler.
* gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix'
parameter. Always use "setup" as prefix. Toggle "set
displaced-stepping" off/on depending on global. Don't switch to
thread 1 here.
(top level): Add displaced stepping "off/on" test axis. Update
"setup" calls. Wrap each subtest with with_test_prefix. Test
continuing with a queued signal in each thread.
2015-04-08 Pedro Alves <palves@redhat.com>
* gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd.
* gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd. Use
gdb_breakpoint instead of gdb_test that doesn't expect anything.
Return early if running to main fails.
* gdb.trace/while-stepping.exp: Likewise.
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id !=
$gdb_spawn_id. Use send_inferior and $inferior_spawn_id to
interact with inferior program.
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (inferior_spawn_id): New global.
(gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's
spawn id after processing the user code.
(default_gdb_start): Set inferior_spawn_id.
(send_inferior): New procedure.
* lib/gdbserver-support.exp (gdbserver_start): Set
inferior_spawn_id.
(close_gdbserver, gdb_exit): Unset inferior_spawn_id.
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
* lib/gdbserver-support.exp (gdbserver_start): Make
$server_spawn_id global.
(gdbserver_start): Don't wait for gdbserver's spawn id with
expect_background.
(close_gdbserver): New procedure.
(gdb_exit): Rename the default version and reimplement.
2015-04-07 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple): When processing an argument,
append the substituted item, not the original item.
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Use gdb_test_multiple instead of
gdb_expect.
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.base/interrupt.exp: Don't handle the case of the inferior
output appearing once only.
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
that doesn't expect anything. Return early if running to main
fails.
2015-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
(child_function): Call alarm.
(main): Move call to alarm into the loop.
* gdb.threads/non-stop-fair-events.exp: Build program with
-DTIMEOUT=$timeout.
2015-04-06 Doug Evans <xdje42@gmail.com>
* lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
Fix dest parameter to board_info.
(fpc_compile): Ditto.
(gdb_compile_pascal): Rename dest arg to destfile.
2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
* gdb.ada/funcall_ref.exp: New file.
* gdb.ada/funcall_ref/foo.adb: New file.
2015-04-02 Yao Qi <yao.qi@linaro.org>
* gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
is remote.
2015-04-02 Gary Benson <gbenson@redhat.com>
* gdb.base/break-probes.exp: Cope with "target:" sysroot.
2015-04-01 Sasha Smundak <asmundak@google.com>
* gdb.python/py-unwind-maint.c: New file.
* gdb.python/py-unwind-maint.exp: New test.
* gdb.python/py-unwind-maint.py: New file.
* gdb.python/py-unwind.c: New file.
* gdb.python/py-unwind.exp: New test.
* gdb.python/py-unwind.py: New test.
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
to fail instead of non-existent $test.
2015-04-01 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
GDBFLAGS if not empty.
2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
* gdb.ada/complete.exp: Remove "multi_line".
* gdb.ada/info_exc.exp: Remove "multi_line".
* gdb.ada/packed_tagged.exp: Remove "multi_line".
* gdb.ada/ptype_field.exp: Remove "multi_line".
* gdb.ada/sym_print_name.exp: Remove "multi_line".
* gdb.ada/tagged.exp: Remove "multi_line".
* gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
[multi_line ...]
* gdb.btrace/delta.exp: Likewise.
* gdb.btrace/exception.exp: Likewise.
* gdb.btrace/function_call_history.exp: Likewise.
* gdb.btrace/instruction_history.exp: Likewise.
* gdb.btrace/nohist.exp: Likewise.
* gdb.btrace/record_goto.exp: Likewise.
* gdb.btrace/segv.exp: Likewise.
* gdb.btrace/stepi.exp: Likewise.
* gdb.btrace/tailcall.exp: Likewise.
* gdb.btrace/unknown_functions.exp: Likewise.
* gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
* lib/gdb.exp: Add the "multi_line" helper.
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/tid-reuse.c: New file.
* gdb.threads/tid-reuse.exp: New file.
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.base/coredump-filter.c: New file.
* gdb.base/coredump-filter.exp: Likewise.
2015-03-27 Petr Machata <pmachata@redhat.com>
* lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset.
(Dwarf::_line_count, Dwarf::_line_saw_file): New variables.
(Dwarf::assemble): Initialize them.
(Dwarf::lines): New function.
2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
* lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
SYMBOL_PREFIX for x86_64-*-cygwin.
2015-03-26 Andy Wingo <wingo@igalia.com>
PR symtab/18148
* gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
const_value but not a location.
* gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
location defined in non-main CUs are visible.
2015-03-26 Yao Qi <yao.qi@linaro.org>
PR testsuite/18139
* gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
Add a line number entry for the same line.
* gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
Add a line number entry for the same line.
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.linespec/break-asm-file0.s (func2): Use nop instead of
.int 0.
(func): Likewise. Add .Lfunc_1 label.
Use .Lfunc_1 label.
* gdb.linespec/break-asm-file1.s (func3): Use nop instead of
.int 0.
(func): Likewise.
Use .Lfunc_1 label.
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
Call gdb_compile instead to compile each .s files without debug
information.
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/savedregs.exp (process_saved_regs): Make
"Saved registers:" optional in the pattern.
2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/next.exp: Merged into step.exp.
* gdb.btrace/finish.exp: Merged into step.exp.
* gdb.btrace/nexti.exp: Merged into stepi.exp.
* gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using
"record goto" and checking the exact replay position.
* gdb.btrace/stepi.exp: Choose test file based on target. Do not
check for "Recording format" in "info record" output.
* gdb.btrace/record_goto.exp: Choose test file based on target.
* gdb.btrace/x86-record_goto.S: Renamed into ...
* gdb.btrace/x86_64-record_goto.S: ... this.
* gdb.btrace/i686-record_goto.S: New.
* gdb.btrace/x86-tailcall.S: Renamed into ...
* gdb.btrace/x86_64-tailcall.S: ... this.
* gdb.btrace/i686-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: Renamed into ...
* gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two
separate statements. Update test.
* gdb.btrace/delta.exp: Use record_goto.c as test file.
* gdb.btrace/gcore.exp: Use record_goto.c as test file.
* gdb.btrace/nohist.exp: Use record_goto.c as test file.
* gdb.btrace/tailcall.exp: Choose test file based on target.
* gdb.btrace/Makefile.in: Remove next, finish, and nexti.
2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/exception.exp: Increase BTS buffer size.
2015-03-24 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".
2015-03-24 Pedro Alves <palves@redhat.com>
* gdb.threads/schedlock.exp (test_step): No longer expect that
"set scheduler-locking step" with "next" over a function call runs
threads unlocked.
2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.mi/mi-pending.exp: Fix output of breakpoint test.
2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
PR breakpoints/16466
* gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
* gdb.mi/mi-pending.c (thread_func): New function.
(int main): Add threading support required.
* gdb.mi/mi-pending.exp: Add tests for this issue.
* gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
(pendfunc2): Remove stdio dependency.
* gdb.mi/mi-pendshr2.c: New file.
2015-03-23 Keith Seitz <keiths@redhat.com>
* gdb.linespec/keywords.c: New file.
* gdb.linespec/keywords.exp: New file.
2015-03-23 Keith Seitz <keiths@redhat.com>
PR gdb/18021
* gdb.dwarf2/staticvirtual.exp: New test.
2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
* README: Remove HP-UX and gdb.hp.
(configuration):
* configure: Regenerate.
* configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
gdb.hp/gdb.defects/Makefile.
* gdb.hp/Makefile.in: File deleted.
* gdb.hp/gdb.aCC/Makefile.in: File deleted.
* gdb.hp/gdb.aCC/optimize.c: File deleted.
* gdb.hp/gdb.aCC/optimize.exp: File deleted.
* gdb.hp/gdb.aCC/run.c: File deleted.
* gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
* gdb.hp/gdb.base-hp/Makefile.in: File deleted.
* gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
* gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
* gdb.hp/gdb.base-hp/dollar.c: File deleted.
* gdb.hp/gdb.base-hp/dollar.exp: File deleted.
* gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
* gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
* gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
* gdb.hp/gdb.base-hp/pxdb.c: File deleted.
* gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
* gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
* gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
* gdb.hp/gdb.base-hp/reg.exp: File deleted.
* gdb.hp/gdb.base-hp/reg.s: File deleted.
* gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
* gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
* gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
* gdb.hp/gdb.compat/Makefile.in: File deleted.
* gdb.hp/gdb.compat/average.c: File deleted.
* gdb.hp/gdb.compat/sum.c: File deleted.
* gdb.hp/gdb.compat/xdb.c: File deleted.
* gdb.hp/gdb.compat/xdb0.c: File deleted.
* gdb.hp/gdb.compat/xdb0.h: File deleted.
* gdb.hp/gdb.compat/xdb1.c: File deleted.
* gdb.hp/gdb.compat/xdb1.exp: File deleted.
* gdb.hp/gdb.compat/xdb2.exp: File deleted.
* gdb.hp/gdb.compat/xdb3.exp: File deleted.
* gdb.hp/gdb.defects/Makefile.in: File deleted.
* gdb.hp/gdb.defects/bs14602.c: File deleted.
* gdb.hp/gdb.defects/bs14602.exp: File deleted.
* gdb.hp/gdb.defects/solib-d.c: File deleted.
* gdb.hp/gdb.defects/solib-d.exp: File deleted.
* gdb.hp/gdb.defects/solib-d1.c: File deleted.
* gdb.hp/gdb.defects/solib-d2.c: File deleted.
* gdb.hp/gdb.objdbg/Makefile.in: File deleted.
* gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
* gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
* gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
* gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
* gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
* gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
* gdb.hp/tools/odump: File deleted.
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.exp (saw_thread_2)
(saw_thread_3): New globals.
(top level): Increment them when an event for the corresponding
thread is seen.
(no thread starvation): New test.
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.c: New file.
* gdb.threads/continue-pending-status.exp: New file.
2015-03-18 Pedro Alves <palves@redhat.com>
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Use gdb_is_target_remote instead of is_remote. Use
gdb_test_multiple instead of gdb_expect. Exit early if
gdb_test_multiple hits its internal matches. Tighten stepi tests
expected output. Fail on exit with any signal, instead of just
SIGILL.
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
variable.
* gdb.base/catch-syscall.exp: Don't skip it on
aarch64*-*-linux* target. Remove elements in all_syscalls.
(test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
target.
(setup_all_syscalls): New proc.
2015-03-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
(top level): Skip tests if valid_addr_p returns false for
$cmd1 or $cmd2.
2015-03-11 Andy Wingo <wingo@igalia.com>
* gdb.guile/scm-objfile.exp: Add objfile-progspace test.
2015-03-11 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Fix typo in comments.
2015-03-11 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Skip it on HP-UX target.
2015-03-09 Pedro Alves <palves@redhat.com>
* dg-extract-results.py: Delete.
2015-03-09 Pedro Alves <palves@redhat.com>
Merge dg-extract-results.sh from GCC upstream (r218843).
2014-12-17 Sergio Durigan Junior <sergiodj@redhat.com>
* dg-extract-results.sh: Use --text with grep to avoid issues with
binary files. Fall back to cat -v, if that doesn't work.
2015-03-05 Pedro Alves <palves@redhat.com>
* gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
2015-03-04 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_expect_interrupt): Accept
alternative event for when in all-stop mode.
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
2015-03-04 Mark Kettenis <kettenis@gnu.org>
* gdb.base/foll-fork.exp: Enable on *-*-openbsd*.
2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
regexps for GDB's current line display, accept a hex address
preceding the line number.
2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
the 'arch1' variable for "s390*-linux*" targets.
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
(main): Pass missing retval argument to pthread_join call.
2015-03-02 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): Handle non-stop.
(top level): Call do_test with non-stop as well.
2015-03-02 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
-1.
2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-vregs.exp: New test.
* gdb.arch/s390-vregs.S: New file.
2015-02-27 Pedro Alves <palves@redhat.com>
* gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
call to catch_command_errors.
* gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
catch_command_errors.
2015-02-27 Pedro Alves <palves@redhat.com>
* gdb.gdb/complaints.exp (test_initial_complaints): Also accept
"true" for boolean result.
* gdb.gdb/selftest.exp (test_with_self): Also accept full
prototype of main.
2015-02-27 Pedro Alves <palves@redhat.com>
* lib/unbuffer_output.c: New file.
* gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
2015-02-27 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
target.
2015-02-26 Doug Evans <dje@google.com>
* gdb.cp/class2.cc (Dbase, D): New classes.
(main): New local delta.
* gdb.cp/class2.exp: Test printing delta.
* gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes.
(dynbar): New global.
* gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar.
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-ifunc.c: New file.
* gdb.compile/compile-ifunc.exp: New file.
2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.base/structs.exp: Check for correct struct on finish.
2015-02-26 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (function_range): Adjust pattern when $func_length
is zero.
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/cordic.ko.bz2: New file.
* gdb.arch/cordic.ko.debug.bz2: New file.
* gdb.arch/ppc64-symtab-cordic.exp: New file.
2015-02-25 Yao Qi <yao.qi@linaro.org>
* gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
aarch64*-*-* target.
2015-02-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (delete_breakpoints): Rewrite using
gdb_test_multiple.
2015-02-23 Pedro Alves <palves@redhat.com>
* gdb.base/info-os.c: Include stdlib.h.
2015-02-22 Doug Evans <xdje42@gmail.com>
PR symtab/17855
* gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
is read after symbols have been re-read.
* gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
* gdb.ada/exec_changed/second.adb (Second): Ditto.
2015-02-21 Doug Evans <dje@google.com>
* gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.
2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
PR corefiles/17808
* gdb.arch/i386-biarch-core.core.bz2: New file.
* gdb.arch/i386-biarch-core.exp: New file.
2015-02-21 Pedro Alves <palves@redhat.com>
* gdb.threads/multi-create-ns-info-thr.exp: Return early if
runto_main fails.
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.base/solib-corrupted.exp: Expect "stap" as first column of
info probes.
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.threads/multi-create-ns-info-thr.exp: New file.
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.trace/no-attach-trace.exp: Don't run to main. Do
clean_restart before gdb_target_supports_trace.
2015-02-20 Pedro Alves <palves@redhat.com>
PR threads/18006
* gdb.threads/clone-thread_db.c: New file.
* gdb.threads/clone-thread_db.exp: New file.
2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
PR breakpoints/16812
* gdb.base/catch-gdb-caused-signals.c: New file.
* gdb.base/catch-gdb-caused-signals.exp: New file.
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
expected message when trying to access $_probe_* convenience
variables while not on a probe.
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-framefilter.exp (pagination quit - *): New tests.
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
2015-02-10 Doug Evans <xdje42@gmail.com>
* lib/gdb.exp (gdb_load): Always return a result.
2015-02-10 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-sigtrap.c: New file.
* gdb.threads/signal-sigtrap.exp: New file.
2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
* gdb.trace/no-attach-trace.c: New file.
* gdb.trace/no-attach-trace.exp: New file.
2015-02-09 Mark Wielaard <mjw@redhat.com>
* gdb.dwarf2/atomic.c: New file.
* gdb.dwarf2/atomic-type.exp: Likewise.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/buffer-size.exp: Update "info record" output.
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/buffer-size: New.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/15678
* gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
macro.
(seconds_left, again): New globals.
(main): Wait seconds_left in a 1-second sleep loop instead of
sleeping 180 seconds. If 'again' is set, reset the seconds
counter.
* gdb.threads/attach-many-short-lived-threads.exp (test): Set
'again' in the inferior before detaching. Print the seconds left.
(options): New global.
(top level): Build program with -DTIMEOUT=$timeout.
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
determine how many seconds to pass to 'alarm'.
* gdb.base/gdb-sigterm.exp (top level): Build program with
-DTIMEOUT=$timeout.
(do_test): Return success/failure indication. Add more verbose
logging. Don't fail if 200 single steps are seen. Instead, fail
when the test times out.
(passes): New global.
(top level): Break the testing loop if testing fails on any
iteration. Use gdb_assert.
2015-02-04 Don Breazeal <donb@codesourcery.com>
* gdb.base/info-os.c (shmid, semid, msqid): Make variables static
and initialize them.
(ipc_cleanup): New function.
(main): Don't declare shmid, semid, and msqid. Add a call to
atexit so that we call ipc_cleanup on exit.
2015-02-04 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove any target variant
specifications from the board name before clearing the isremote
flag from board_info.
2015-01-31 Doug Evans <xdje42@gmail.com>
* gdb.base/maint.exp <maint print type argc>: Update expected output.
2015-01-31 Gary Benson <gbenson@redhat.com>
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
2015-01-31 Doug Evans <xdje42@gmail.com>
* gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12.
2015-01-31 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-section-script.c: Add duplicate inlined section script
entries. Duplicate file section script entries.
* gdb.guile/scm-section-script.exp: Add tests for duplicate entries,
inlined entries. Add test for safe-path rejection.
* gdb.python/py-section-script.c: Add duplicate inlined section script
entries. Duplicate file section script entries.
* gdb.python/py-section-script.exp: Add tests for duplicate entries,
inlined entries. Add test for safe-path rejection.
2015-01-29 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/disc_arr_bound: New testcase.
2015-01-29 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/mi_var_array: New testcase.
2015-01-27 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Add tests for objfile.username.
Add test for objfile.filename, objfile.username after objfile
has been unloaded.
2015-01-26 Joel Brobecker <brobecker@adacore.com>
* gdb.python/py-lookup-type.exp (test_lookup_type): Change
the second test to print the name attribute of value
returned by the call to gdb.lookup_type, and adjust
the expected output accordingly.
2015-01-25 Mark Wielaard <mjw@redhat.com>
* gdb.arch/i386-bp_permanent.c (standard): New declaration.
* gdb.base/disp-step-fork.c: Include unistd.h.
* gdb.base/siginfo-obj.c: Include stdio.h.
* gdb.base/siginfo-thread.c: Likewise.
* gdb.mi/non-stop.c: Include unistd.h.
* gdb.mi/nsthrexec.c: Include stdio.h.
* gdb.mi/pthreads.c: Include unistd.h.
* gdb.modula2/unbounded1.c (main): Declare returns int.
* gdb.reverse/consecutive-reverse.c: Likewise.
* gdb.threads/create-fail.c: Include unistd.h.
* gdb.threads/killed.c: Likewise.
* gdb.threads/linux-dp.c: Likewise.
* gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
* gdb.threads/non-ldr-exc-2.c: Likewise.
* gdb.threads/non-ldr-exc-3.c: Likewise.
* gdb.threads/non-ldr-exc-4.c: Likewise.
* gdb.threads/pthreads.c: Include unistd.h.
(main): Declare returns int.
* gdb.threads/tls-main.c (foo): New declaration.
* gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
* gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
* gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
2015-01-15 Mark Wielaard <mjw@redhat.com>
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
2015-01-23 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-after-query.c: New file.
* gdb.threads/continue-pending-after-query.exp: New file.
2015-01-22 Anders Granlund <anders.granlund@ericsson.com>
Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile.exp (pointer to jit function): New test.
2015-01-17 Wei-cheng Wang <cole945@gmail.com>
* lib/gdb.exp (supports_process_record): Return true for
powerpc*-*-linux*.
(supports_reverse): Likewise.
2015-01-15 Don Breazeal <donb@codesourcery.com>
* gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
instead of checking whether the target board is remote and
use spawn_wait_for_attach instead of exec/sleep.
* gdb.base/attach-twice.exp: Likewise.
2015-01-15 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/var_arr_attrs: New testcase.
2015-01-14 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
PR gdb/17525
* gdb.base/bp-cmds-execution-x-script.c: New file.
* gdb.base/bp-cmds-execution-x-script.exp: New file.
* gdb.base/bp-cmds-execution-x-script.gdb: New file.
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* gdb.base/batch-preserve-term-settings.c: New file.
* gdb.base/batch-preserve-term-settings.exp: New file.
2015-01-13 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
binary.
2015-01-13 Joel Brobecker <brobecker@adacore.com>
* Makefile.in (clean mostlyclean): Do not delete *.py.
2015-01-13 Joel Brobecker <brobecker@adacore.com>
* gdb.python/py-lookup-type.exp: New file.
2015-01-12 Pedro Alves <palves@redhat.com>
* gdb.python/py-prompt.exp: When the board can't spawn for attach,
restore GDBFLAGS before returning.
2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
is_amd64_regs_target and is_x86_like_target.
2015-01-11 Doug Evans <xdje42@gmail.com>
* lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
is given without an explicit form.
* gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
attributes.
* gdb.dwarf/corrupt.exp: Ditto.
* gdb.dwarf2/enum-type.exp: Ditto.
* gdb.trace/entry-values.exp: Ditto.
* gdb.trace/unavailable-dwarf-piece.exp: Ditto.
2015-01-11 Doug Evans <xdje42@gmail.com>
PR gdb/15830
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.c: New file.
* gdb.threads/non-stop-fair-events.exp: New file.
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
the global scope. Set a breakpoint after all threads are started
rather than stepping over two source lines. Expect the prompt.
* gdb.base/watch_thread_num.c (threads_started_barrier): New
global.
(NUM): Now 15.
(main): Use threads_started_barrier to wait for all threads to
start. Main thread no longer calls thread_function. Exit after
180 seconds.
(loop): New function.
(thread_function): Wait on threads_started_barrier barrier. Call
'loop' at each iteration.
* gdb.base/watch_thread_num.exp: Continue to breakpoint after all
threads have started, instead of hardcoding number of "next"
steps. Use an access watchpoint instead of a write watchpoint.
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
(thread_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/siginfo-threads.c (threads_started_barrier): New
global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/watchthreads-reorder.c (threads_started_barrier):
New global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c: New file.
* gdb.threads/attach-many-short-lived-threads.exp: New file.
2014-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/fork-thread-pending.exp: Switch to the main thread
instead of to thread 2.
* gdb.threads/signal-command-multiple-signals-pending.c (main):
Add barrier around each pthread_create call instead of around all
calls.
* gdb.threads/signal-command-multiple-signals-pending.exp (test):
Set a break on thread_function and have the child threads hit it
one at at a time.
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
2015-01-08 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Set call_insn for MIPS target.
2015-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix testcase compilation.
* gdb.arch/i386-avx512.exp (comp_flags): Remove /common.
2015-01-06 Joel Brobecker <brobecker@adacore.com>
* gdb.python/py-type.exp: Add a couple test about empty
array creation, and negative-length array creation.
2015-01-02 Doug Evans <xdje42@gmail.com>
* gdb.cp/nsalias.exp: Fix output of external/declaration flags.
2015-01-02 Doug Evans <dje@google.com>
* gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc.
2014-12-29 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Update comments. Rename variable
bar_call_foo to returned_from_foo.
2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
PR gdb/17394
* gdb.linespec/break-asm-file.c: New file.
* gdb.linespec/break-asm-file.exp: New file.
* gdb.linespec/break-asm-file0.s: New file.
* gdb.linespec/break-asm-file1.s: New file.
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/float.exp: Handle the new output from "info float" on
MIPS targets.
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
2014-12-16 Doug Evans <xdje42@gmail.com>
* boards/stabs.exp: New file.
2014-12-16 Andreas Arnez <arnez@vnet.linux.ibm.com>
* gdb.base/completion.exp: Adjust to format changes of "maint
print user-registers".
2014-12-16 Catalin Udma <catalin.udma@freescale.com>
PR server/17457
* gdb.arch/aarch64-fp.c: New file.
* gdb.arch/aarch64-fp.exp: New file.
2014-12-15 Sergio Durigan Junior <sergiodj@redhat.com>
Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
r210637, r210913, r211666, r215400, r215817).
2014-05-08 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py: New file.
* dg-extract-results.sh: Use it if the environment seems
suitable.
2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py (parse_run): Handle warnings that
are printed before a test harness is run.
2014-05-25 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py (Named): Remove __cmp__ method.
(output_variation): Use a key to sort variation.harnesses.
2014-06-14 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py: For Python 3, force sys.stdout to
handle surrogate escape sequences.
(safe_open): New function.
(output_segment, main): Use it.
2014-09-19 Segher Boessenkool <segher@kernel.crashing.org>
* dg-extract-results.py (Prog.result_re): Include options
in test name.
2014-10-02 Segher Boessenkool <segher@kernel.crashing.org>
* dg-extract-results.py (output_variation): Always sort if
do_sum.
2014-12-15 Simon Marchi <simon.marchi@ericsson.com>
* lib/gdb.exp (default_gdb_start): After starting gdb, loop
as long as we get pagination notifications.
2014-12-15 Jason Merrill <jason@redhat.com>
* Makefile.in (check-gdb.%): Restore.
* README: Mention it.
2014-12-13 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/str_uninit: New testcase.
2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/17642
* gdb.base/vla-stub-define.c: New file.
* gdb.base/vla-stub.c: New file.
* gdb.base/vla-stub.exp: New file.
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
2014-12-12 Tom Tromey <tromey@redhat.com>
* lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
2014-12-12 Doug Evans <dje@google.com>
* lib/gdb-python.exp (get_python_valueof): New function.
* gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.
2014-12-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/completion.exp: Add test for completion of "info
registers ".
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
PR breakpoints/17012
* gdb.base/dprintf-detach.c: New file.
* gdb.base/dprintf-detach.exp: New file.
2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
* gdb.trace/qtro.exp: Replace gdbserver detection code by...
* lib/gdb.exp (target_is_gdbserver): New procedure.
2014-12-08 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Add tests for objfile.owner.
2014-12-05 Yao Qi <yao@codesourcery.com>
* gdb.guile/scm-error.exp: Remove the third argument to
gdb_remote_download.
* gdb.guile/scm-frame-args.exp: Likewise.
* gdb.guile/scm-section-script.exp: Likewise.
2014-12-05 Yao Qi <yao@codesourcery.com>
* gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
2014-12-04 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Add tests for
objfile.add_separate_debug_file.
2014-12-04 Doug Evans <dje@google.com>
* lib/gdb.exp (get_build_id): New function.
(build_id_debug_filename_get): Rewrite to use it.
* gdb.python/py-objfile.exp: Add test for objfile.build_id.
2014-12-04 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
`method(long)', not just 0x0.
* gdb.cp/nsalias.exp: Align code labels to 4.
* gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
* gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
* gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
* gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
(cu_text_start, FUNC_lang_start): Use `START_INSNS'.
* gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.
2014-12-02 Doug Evans <dje@google.com>
PR symtab/17602
* gdb.cp/anon-ns.cc: Move guts of this file to ...
* gdb.cp/anon-ns2.cc: ... here. New file.
* gdb.cp/anon-ns.exp: Update.
2014-12-02 Nick Bull <nicholaspbull@gmail.com>
* gdb.python/py-events.py (inferior_call_handler): New.
(register_changed_handler, memory_changed_handler): New.
(test_events.invoke): Register new handlers.
* gdb.python/py-events.exp: Add tests for inferior call,
memory_changed and register_changed events.
2014-12-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/execl-update-breakpoints.exp: Specify the link address
with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
if the linker doesn't understand this.
2014-12-01 Simon Marchi <simon.marchi@ericsson.com>
* gdb.python/python.exp: Change expected reply to help().
2014-12-01 Yao Qi <yao@codesourcery.com>
* configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
AC_CONFIG_SUBDIRS(gdb.gdbtk).
* configure: Re-generated.
2014-11-28 Siva Chandra Reddy <sivachandra@google.com>
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
2014-11-28 Simon Marchi <simon.marchi@ericsson.com>
* gdb.ada/py_range.exp: Add parentheses to python calls to print.
* gdb.dwarf2/symtab-producer.exp: Same.
* gdb.gdb/python-interrupts.exp: Same.
* gdb.gdb/python-selftest.exp: Same.
* gdb.python/py-linetable.exp: Same.
* gdb.python/py-type.exp: Same.
* gdb.python/py-value-cc.exp: Same.
* gdb.python/py-value.exp: Same.
2014-11-28 Yao Qi <yao@codesourcery.com>
* gdb.base/break-probes.exp: Match library name prefixed with
sysroot.
2014-11-27 Simon Marchi <simon.marchi@ericsson.com>
* gdb.python/py-linetable.exp: Escape properly sorted(fset)
test expected output. Add parentheses for the call to print.
Remove L suffix from integers.
2014-11-26 Doug Evans <dje@google.com>
* gdb.dwarf2/dw2-op-out-param.S: Fix comment.
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.c: Remove asms.
(foo): Add foo_label.
(bar): Add bar_label.
* gdb.trace/entry-values.exp: Remove code computing foo's
length and bar's length.
(Dwarf::assemble): Invoke function_range for bar and use
MACRO_AT_func for foo.
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
Use .Lgcc43_procstart instead of gcc43.
2014-11-21 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/n_arr_bound: New testcase.
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
2014-11-20 Doug Evans <xdje42@gmail.com>
* gdb.base/maint.exp: Update expected output.
2014-11-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
4-byte instruction on S390.
2014-11-19 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/arr_arr: New testcase.
2014-11-19 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/pkd_arr_elem: New Testcase.
2014-11-18 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/break-precsave: Expect completion message for
core file reads.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/bp-permanent.c: Include unistd.h.
* gdb.python/py-framefilter-mi.c (main): Add return type.
* gdb.python/py-framefilter.c (main): Likewise.
* gdb.trace/actions-changed.c (main): Likewise.
2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.mi/until.c: Add eye-catchers.
* gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
line numbers.
2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/condbreak.exp: Drop references to removed non-prototype
function header variants in break1.c.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.reverse/until-precsave.exp: Drop references to removed
non-prototype function header variants in ur1.c.
* gdb.reverse/until-reverse.exp: Likewise.
2014-11-17 Petr Machata <pmachata@redhat.com>
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
${_cu_offset_size} bytes abbrev offset.
2014-11-15 Doug Evans <xdje42@gmail.com>
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
(func): Add label func_label.
* gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
Replace low_pc and high_pc with MACRO_AT_range.
Replace name, low_pc and high_pc with MACRO_AT_func.
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
Replace name, low_pc and high_pc with MACRO_AT_func.
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
produce debug information.
* gdb.dwarf2/implptr-optimized-out.S: Removed.
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
object and get function length.
(Dwarf::assemble): Replace name, low_pc and high_pc attributes
with MACRO_AT_func.
(top-level): Replace gdb_compile and clean_restart with
prepare_for_testing.
* gdb.dwarf2/main.c (main): Add label main_label.
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (function_range): New procedure.
(Dwarf::_handle_macro_at_func): New procedure.
(Dwarf::_handle_macro_at_range): New procedure.
(Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
(_handle_attribute): New procedure.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.ada/cond_lang/foo.c (callme): Add return type.
* gdb.base/call-sc.c (zed): Likewise.
* gdb.base/checkpoint.c (main): Likewise.
* gdb.base/dump.c (main): Likewise.
* gdb.base/gcore.c (main): Likewise.
* gdb.base/huge.c (main): Likewise.
* gdb.base/multi-forks.c (main): Likewise.
* gdb.base/pr10179-a.c (main): Likewise.
* gdb.base/savedregs.c (main): Likewise.
* gdb.base/sigaltstack.c (main): Likewise.
* gdb.base/siginfo.c (main): Likewise.
* gdb.base/structs.c (zed): Likewise.
* gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
* gdb.mi/mi-syn-frame.c (main): Likewise.
* gdb.mi/until.c (foo, main): Likewise.
* gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
* gdb.base/solib-weak.c (foo): Declare.
* gdb.base/attach-twice.c: Include stdio.h.
* gdb.base/weaklib1.c: Likewise.
* gdb.base/weaklib2.c: Likewise.
* gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
* gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
unistd.h.
* gdb.base/attach-pie-misread.c: Include stdlib.h.
* gdb.mi/mi-exit-code.c: Likewise.
* gdb.base/break-interp-lib.c: Include string.h.
* gdb.base/coremaker.c: Likewise.
* gdb.base/testenv.c: Likewise.
* gdb.python/py-finish-breakpoint.c: Likewise.
* gdb.base/inferior-died.c: Include sys/wait.h.
* gdb.base/fileio.c: Include time.h.
* gdb.base/async-shell.c: Include unistd.h.
* gdb.base/dprintf-non-stop.c: Likewise.
* gdb.base/info-os.c: Likewise.
* gdb.mi/mi-console.c: Likewise.
* gdb.mi/watch-nonstop.c: Likewise.
* gdb.python/py-events.c: Likewise.
* gdb.base/async.c (baz): Move up before its invocation.
* gdb.base/code_elim2.c (my_global_func): Likewise.
* gdb.base/skip-solib-lib.c (multiply): Likewise.
* gdb.base/advance.c (func2): Likewise.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/annota3.c: Likewise.
* gdb.base/async.c: Likewise.
* gdb.base/average.c: Likewise.
* gdb.base/call-ar-st.c: Likewise.
* gdb.base/call-rt-st.c: Likewise.
* gdb.base/call-sc.c: Likewise.
* gdb.base/call-strs.c: Likewise.
* gdb.base/ending-run.c: Likewise.
* gdb.base/execd-prog.c: Likewise.
* gdb.base/exprs.c: Likewise.
* gdb.base/foll-exec.c: Likewise.
* gdb.base/foll-fork.c: Likewise.
* gdb.base/foll-vfork.c: Likewise.
* gdb.base/funcargs.c: Likewise.
* gdb.base/gcore.c: Likewise.
* gdb.base/jump.c: Likewise.
* gdb.base/langs0.c: Likewise.
* gdb.base/langs1.c: Likewise.
* gdb.base/langs2.c: Likewise.
* gdb.base/mips_pro.c: Likewise.
* gdb.base/nodebug.c: Likewise.
* gdb.base/opaque0.c: Likewise.
* gdb.base/opaque1.c: Likewise.
* gdb.base/recurse.c: Likewise.
* gdb.base/run.c: Likewise.
* gdb.base/scope0.c: Likewise.
* gdb.base/scope1.c: Likewise.
* gdb.base/setshow.c: Likewise.
* gdb.base/setvar.c: Likewise.
* gdb.base/shmain.c: Likewise.
* gdb.base/shr1.c: Likewise.
* gdb.base/shr2.c: Likewise.
* gdb.base/sigall.c: Likewise.
* gdb.base/signals.c: Likewise.
* gdb.base/so-indr-cl.c: Likewise.
* gdb.base/solib2.c: Likewise.
* gdb.base/structs.c: Likewise.
* gdb.base/sum.c: Likewise.
* gdb.base/vforked-prog.c: Likewise.
* gdb.base/watchpoint.c: Likewise.
* gdb.reverse/shr2.c: Likewise.
* gdb.reverse/until-reverse.c: Likewise.
* gdb.reverse/ur1.c: Likewise.
* gdb.reverse/watch-reverse.c: Likewise.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/sepdebug.exp: Drop references to removed code.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
variant. Preserve original line numbering.
* gdb.base/list1.c: Likewise.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/break1.c: Likewise.
* gdb.base/break.exp: Drop references to removed code.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
logic into perform_all_tests() and invoke it with and without
function header prototypes.
(do_function_calls): Remove conditional XFAIL for PR 5318.
(rerun_and_prepare): Remove duplicate code.
(perform_all_tests): New. Main logic moved here.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
code guarded by #ifdef NO_PROTOTYPES.
(t_double_many_args): Likewise.
(DEF_FUNC_MANY_ARGS_1): Likewise.
(DEF_FUNC_VALUES_1): Likewise.
(t_structs_ldc): Renamed from t_structs_fc in conditional code
guarded by #ifdef PROTOTYPES.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.mi/mi-console.c: Add eye-catcher.
* gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
instead of literal line number.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/shr2.c: Add eye-catcher.
* gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
line number.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/jump.c: Add eye-catchers.
* gdb.base/jump.exp: Refer to eye-catchers instead of literal line
numbers.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/execd-prog.c: Add eye-catchers.
* gdb.base/foll-exec.c: Likewise.
* gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
line numbers.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/ending-run.c: Add eye-catchers.
* gdb.base/ending-run.exp: Refer to eye-catchers instead of
literal line numbers.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/call-rt-st.c: Add eye-catchers.
* gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
literal line numbers.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/call-ar-st.c: Add eye-catchers.
* gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
literal line numbers.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/average.c: Add eye-catchers.
* gdb.base/sum.c: Likewise.
* gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
regexps dynamically.
2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/solib1.c: Add eye-catchers.
* gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
literal line numbers.
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
leader has exited.
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-bp_permanent.c: New file.
* gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
(srcfile): Set to i386-bp_permanent.c.
(top level): Adjust to work in both 32-bit and 64-bit modes. Test
that stepi does not execute the 'leave' instruction, instead of
testing it does execute.
* gdb.base/bp-permanent.c: New file.
* gdb.base/bp-permanent.exp: New file.
2014-11-10 Doug Evans <xdje42@gmail.com>
PR symtab/17564
* gdb.base/symtab-search-order.exp: New file.
* gdb.base/symtab-search-order.c: New file.
* gdb.base/symtab-search-order-1.c: New file.
* gdb.base/symtab-search-order-shlib-1.c: New file.
2014-11-07 Pedro Alves <palves@redhat.com>
PR gdb/17511
* gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
i?86-*-linux*.
2014-11-03 Siva Chandra Reddy <sivachandra@google.com>
PR c++/17494
* gdb.cp/pr17494.cc: New file.
* gdb.cp/pr17494.exp: New file.
2014-11-02 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Get working directory and match the
output of "set extended-prompt \\w " with it.
2014-10-30 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Add tests for setting random attributes
in objfiles.
* gdb.python/py-progspace.exp: Add tests for setting random attributes
in progspaces.
2014-10-30 Janis Johnson <janisjo@codesourcery.com>
* gdb.base/fullpath-expand.exp: Skip for a remote host.
* gdb.base/realname-expand.exp: Likewise.
* gdb.linespec/macro-relative.exp: Likewise.
2014-10-29 Pedro Alves <palves@redhat.com>
PR gdb/17408
* gdb.threads/schedlock.c (some_function): New function.
(call_function): New global.
(MAYBE_CALL_SOME_FUNCTION): New macro.
(thread_function): Call it.
* gdb.threads/schedlock.exp (get_args): Add description parameter,
and use it instead of a global counter. Adjust all callers.
(get_current_thread): Use "find current thread" for test message
here rather than having all callers pass down the same string.
(goto_loop): New procedure, factored out from ...
(my_continue): ... this.
(step_ten_loops): Change parameter from test message to command to
use. Adjust.
(list_count): Delete global.
(check_result): New procedure, factored out from duplicate top
level code.
(continue tests): Wrap in with_test_prefix.
(test_step): New procedure, factored out from duplicate top level
code.
(top level): Test "step" in combination with all scheduler-locking
modes. Test "next" in combination with all scheduler-locking
modes, and in combination with stepping over a function call or
not.
* gdb.threads/next-bp-other-thread.c: New file.
* gdb.threads/next-bp-other-thread.exp: New file.
2014-10-29 Pedro Alves <palves@redhat.com>
PR python/17372
* gdb.python/python.exp: Test a multi-line command that spawns
interactive Python.
* gdb.base/multi-line-starts-subshell.exp: New file.
2014-10-29 Yao Qi <yao@codesourcery.com>
* gdb.base/fileio.exp: Make directories on host.
2014-10-29 Yao Qi <yao@codesourcery.com>
* gdb.base/fileio.c (test_write): Close the file.
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdb.base/sigstep.c (no_handler): New global.
(main): If 'no_handler is true, set the signal handlers to
SIG_IGN.
* gdb.base/sigstep.exp (breakpoint_over_handler): Add
with_sw_watch and no_handler parameters. Handle them.
(top level) <stepping over handler when stopped at a breakpoint
test>: Add a test axis for testing with a software watchpoint, and
another for testing with the signal handler set to SIG_IGN.
* gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
* gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/17511
* gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
* gdb.base/sigstep.exp (other_handler_location): New global.
(advance): Support stepping into the signal handler, and running
commands while in the handler.
(in_handler_map): New global.
(top level): In the advance test, add combinations for getting
into the handler with stepping commands, and for running commands
in the handler. Add comment descripting the advancei tests.
2014-10-28 Pedro Alves <palves@redhat.com>
* gdb.base/sigstep.exp: Use build_executable instead of
prepare_for_testing.
(top level): Move code that starts GDB, runs to main and creates a
display to ...
(restart): ... this new procedure.
(top level): Move backtrace from signal handler test to ...
(validate_backtrace): ... this new procedure.
(advance, advancei): Rename parameter from 'i' to 'cmd'. Use
with_test_prefix. Always restart GDB.
(skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
with_test_prefix. Always restart GDB. No need to delete
breakpoints after the test.
(test_skip_handler): Remove prefix parameter.
(skip_over_handler, breakpoint_to_handler)
(breakpoint_to_handler_entry, breakpoint_over_handler): Rename
parameter from 'i' to 'cmd'. Use with_test_prefix. Always
restart GDB. No need to delete breakpoints after the test.
(top level): Use foreach to call the test procedures with
different commands.
2014-10-28 Pedro Alves <palves@redhat.com>
* gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
instead of GNATS numbers.
* gdb.base/sigbpt.exp: Likewise.
* gdb.base/siginfo.exp: Likewise.
* gdb.base/sigstep.exp: Likewise.
2014-10-27 Pedro Alves <palves@redhat.com>
* gdb.base/sigstep.c (dummy): New global.
(main): Issue a couple writes to the new global.
* gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
procedures.
(skip_over_handler): Use test_skip_handler.
(top level): Call skip_over_handler for stepi and nexti too.
(breakpoint_over_handler): Use test_skip_handler.
(top level): Call breakpoint_over_handler for stepi and nexti too.
2014-10-27 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c (adjust_function_address)
[__powerpc64__ && _CALL_ELF != 2]: Get function address from
function descriptor.
2014-10-24 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-fork.exp (test_follow_fork,
catch_fork_child_follow): Check for updated fork messages emitted
from infrun.c.
* gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
vfork_and_exec_child_follow_through_step): Check for updated vfork
messages emitted from infrun.c.
2014-10-24 Pedro Alves <palves@redhat.com>
* gdb.base/corefile.exp: Remove references to ultrix.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/whatis.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.threads/manythreads.exp: Likewise.
* gdb.threads/print-threads.exp: Likewise.
* gdb.threads/pthreads.exp:: Likewise.
* gdb.threads/schedlock.exp: Likewise.
2014-10-24 Siva Chandra Reddy <sivachandra@google.com>
* gdb.cp/non-trivial-retval.cc: Add a test case.
* gdb.cp/non-trivial-retval.exp: Add a test.
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
* gdb.python/py-objfile-script-gdb.py: New file.
* gdb.python/py-objfile-script.exp: Update reference to
py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
of remote_download. Remove the dest file.
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.base/checkpoint.exp: Don't remove file copied on host.
* gdb.base/step-line.exp: Likewise.
* gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
* gdb.dwarf2/dw2-basic.exp: Likewise.
* gdb.dwarf2/dw2-compressed.exp: Likewise.
* gdb.dwarf2/dw2-filename.exp: Likewise.
* gdb.dwarf2/dw2-intercu.exp: Likewise.
* gdb.dwarf2/dw2-intermix.exp: Likewise.
* gdb.dwarf2/dw2-producer.exp: Likewise.
* gdb.dwarf2/mac-fileno.exp: Likewise.
* gdb.python/py-frame-args.exp: Likewise.
* gdb.python/py-framefilter.exp: Likewise.
* gdb.python/py-mi.exp: Likewise.
* gdb.python/py-objfile-script.exp: Likewise
* gdb.python/py-pp-integral.exp: Likewise.
* gdb.python/py-pp-re-notag.exp: Likewise.
* gdb.python/py-prettyprint.exp: Likewise.
* gdb.python/py-section-script.exp: Likewise.
* gdb.python/py-typeprint.exp: Likewise.
* gdb.python/py-xmethods.exp: Likewise.
* gdb.stabs/weird.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Likewise.
2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
* gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
(out_cu): Use addr_len for the size of addresses.
(out_line): Likewise. Size DW_LNE_set_address instruction
according to addr_len.
* gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
(FUNC): Add START_INSNS to definition.
2014-10-18 Yao Qi <yao@codesourcery.com>
* gdb.base/argv0-symlink.exp: Check argv[0] value if
gdb_has_argv0 return true.
* gdb.guile/scm-value.exp (test_value_in_inferior): Don't
check [target_info exists noargs], check [gdb_has_argv0]
instead.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
procedures.
2014-10-17 Doug Evans <dje@google.com>
* gdb.python/py-events.exp: Update expected output for clear_objfiles
event.
* gdb.python/py-events.py: Add clear_objfiles event.
2014-10-17 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Test progspace attribute.
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* gdb.base/bg-execution-repeat.c: New file.
* gdb.base/bg-execution-repeat.exp: New file.
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* gdb.base/continue-all-already-running.c: New file.
* gdb.base/continue-all-already-running.exp: New file.
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
2014-10-17 Yao Qi <yao@codesourcery.com>
* gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
check 'target_info exists noargs'.
(test_command_prompt_position): Likewise.
(progvar_simple_if_test): Don't check 'target_info exists noargs'.
Remove "set args".
(progvar_simple_while_test): Likewise.
(progvar_complex_if_while_test): Likewise.
(if_while_breakpoint_command_test): Likewise.
(infrun_breakpoint_command_test): Likewise.
(breakpoint_command_test): Likewise.
(watchpoint_command_test): Likewise.
(bp_deleted_in_command_test): Likewise.
(temporary_breakpoint_commands): Likewise.
2014-10-16 Yao Qi <yao@codesourcery.com>
* gdb.base/remotetimeout.exp: Remove noargs checking.
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
2014-10-15 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/demangle.exp: Update for demangling changes.
2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
* gdb.cp/non-trivial-retval.cc: Add new test cases.
* gdb.cp/non-trivial-retval.exp: Add new tests.
2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
PR c++/13403
PR c++/15154
* gdb.cp/non-trivial-retval.cc: New file.
* gdb.cp/non-trivial-retval.exp: New file.
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
remote host.
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
2014-10-14 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/addr_arith: New testcase.
2014-10-14 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
* gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/stap-eval-lang-ada.S: Likewise.
* gdb.arch/stap-eval-lang-ada.c: Likewise.
* gdb.arch/stap-eval-lang-ada.exp: New file.
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-child.exp: Step over new added statements.
Update test to match the new output.
* gdb.mi/var-cmd.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-display.exp: Update test to match output.
Step to the line specified by $line_dct_nothing.
Increase the number of lines to step.
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
tests.
* gdb.mi/mi2-var-child.exp: Likewise.
2014-10-13 Doug Evans <dje@google.com>
* gdb.python/py-objfile.exp: Change name of file name test.
2014-10-13 Doug Evans <dje@google.com>
* gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
from the start of the CU.
2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Yao Qi <yao@codesourcery.com>
Fix "save breakpoints" for "catch" command.
* gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
Remove -nonewline. Match also the added "main" line.
2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "save breakpoints" for "disable $bpnum" command.
* gdb.base/save-bp.c (main): Add label.
* gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.exp: Execute command
"set remote trace-status-packet on" before "tstatus".
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.c: Include sys/types.h and unistd.h.
(main): Call getppid.
* gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
and continue to it. Read variable "server_pid".
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.exp: Remove "delete_breakpoints".
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.threads/thread-find.exp: Don't execute command
"info threads".
* gdb.threads/attach-into-signal.exp (corefunc): Likewise.
* gdb.threads/linux-dp.exp: Don't check the condition
$threads_created equals to zero.
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
PR symtab/14466
* gdb.base/vdso-warning.c: New file.
* gdb.base/vdso-warning.exp: New file.
2014-10-02 Doug Evans <dje@google.com>
* gdb.base/structs.c (main): Don't run forever.
2014-10-02 Pedro Alves <palves@redhat.com>
* gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
(top level) <stop threads 1, stop threads 2>: Use it.
2014-10-02 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp (test): Add new
'update_thread_list' argument. Skip "info threads" if false.
(top level): Add new 'update_thread_list' axis.
2014-10-02 Pedro Alves <palves@redhat.com>
PR breakpoints/17431
* gdb.base/execl-update-breakpoints.c: New file.
* gdb.base/execl-update-breakpoints.exp: New file.
2014-10-01 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.c: New file.
* gdb.base/breakpoint-in-ro-region.exp: New file.
2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
* gdb.mi/mi-exit-code.exp: New file.
* gdb.mi/mi-exit-code.c: New file.
2014-09-30 Yao Qi <yao@codesourcery.com>
* lib/prelink-support.exp (build_executable_own_libs): Error if
the target isn't native.
2014-09-30 Yao Qi <yao@codesourcery.com>
* gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
false.
2014-09-22 Pedro Alves <palves@redhat.com>
* gdb.threads/break-while-running.exp: New file.
* gdb.threads/break-while-running.c: New file.
2014-09-19 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
Invoke test. Restart GDB with --readnow and invoke test again.
2014-09-19 Yao Qi <yao@codesourcery.com>
* gdb.base/break-on-linker-gcd-function.exp: Move test into new
proc set_breakpoint_on_gcd_function. Invoke
set_breakpoint_on_gcd_function. Restart GDB with --readnow and
invoke set_breakpoint_on_gcd_function again.
2014-09-18 Doug Evans <dje@google.com>
* gdb.dwarf2/symtab-producer.exp: New file.
2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/global-var-nested-by-dso-solib1.c: New file.
* gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
* gdb.base/global-var-nested-by-dso.c: Likewise.
* gdb.base/global-var-nested-by-dso.exp: Likewise.
2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.base/watch-bitfields.exp: Pass string other than test file
name to prepare_for_testing.
(watch): New procedure.
(expect_watchpoint): Use with_test_prefix.
(top level): Factor out tests to ...
(test_watch_location, test_regular_watch): ... these new
procedures, and use with_test_prefix and gdb_continue_to_end.
2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
PR breakpoints/12526
* gdb.base/watch-bitfields.exp: New file.
* gdb.base/watch-bitfields.c: New file.
2014-09-16 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
software and hardware addresses, not software address against
itself.
2014-09-16 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-stops-at-right-insn.c: New file.
* gdb.base/watchpoint-stops-at-right-insn.exp: New file.
2014-09-16 Pedro Alves <palves@redhat.com>
* config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
files.
* gdb.base/a2-run.exp: Remove all code guarded by istarget
"*-*-vxworks*" throughout.
* gdb.base/break.exp: Likewise.
* gdb.base/default.exp: Likewise.
* gdb.base/scope.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/break.c: Remove all code guarded by #ifdef vxworks
throughout.
* gdb.base/run.c: Likewise.
* gdb.base/sepdebug.c: Likewise.
* gdb.hp/gdb.aCC/run.c: Likewise.
* gdb.reverse/until-reverse.c: Likewise.
* lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
2014-09-16 Yao Qi <yao@codesourcery.com>
* boards/local-remote-host-native.exp: New file.
2014-09-14 Doug Evans <xdje42@gmail.com>
* gdb.threads/queue-signal.c (thread_count): New variable.
(thread_count_mutex, thread_count_condvar): New variables.
(incr_thread_count, wait_all_threads_running): New functions.
(main): Wait for all threads to be in their thread functions.
2014-09-13 Doug Evans <xdje42@gmail.com>
* gdb.threads/queue-signal.c: New file.
* gdb.threads/queue-signal.exp: New file.
2014-09-13 Doug Evans <xdje42@gmail.com>
* lib/gdb.exp (gdb_prompt): Add comment and change initial value to
be consistent with what default_gdb_init uses.
(with_gdb_prompt): Change form of PROMPT argument from a regexp to
the plain text of the prompt. Add some logging printfs.
* gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
2014-09-12 Pedro Alves <palves@redhat.com>
* gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
* gdb.arch/i386-size-overlap.exp: Likewise.
* gdb.arch/i386-size.exp: Likewise.
* gdb.arch/i386-unwind.exp: Likewise.
* gdb.base/a2-run.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/charset.exp: Likewise.
* gdb.base/chng-syms.exp: Likewise.
* gdb.base/commands.exp: Likewise.
* gdb.base/dbx.exp: Likewise.
* gdb.base/find.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/jit-simple.exp: Likewise.
* gdb.base/reread.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/step-bt.exp: Likewise.
* gdb.cp/mb-inline.exp: Likewise.
* gdb.cp/mb-templates.exp: Likewise.
* gdb.objc/basicclass.exp: Likewise.
* gdb.threads/killed.exp: Likewise.
2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
PR tdep/17379
* gdb.arch/powerpc-stackless.S: New file.
* gdb.arch/powerpc-stackless.exp: New file.
2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/attach.c: Include unistd.h.
(main): Call alarm. Add label postloop.
* gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
gdb_breakpoint, gdb_continue_to_breakpoint.
(test_command_line_attach_run): Kill ${testpid} in one exit path.
2014-09-11 Pedro Alves <palves@redhat.com>
PR gdb/17347
* lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
* gdb.base/attach.exp (test_command_line_attach_run): New
procedure.
(top level): Call it.
2014-09-11 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (spawn_wait_for_attach): New procedure.
* gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
(do_command_attach_tests): Use spawn_wait_for_attach.
* gdb.base/solib-overlap.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
* gdb.fortran/array-element.exp: Remove unexpected "continue"
command in testcase. Simplify testcase.
2014-09-10 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
2014-09-10 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
2014-09-10 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
2014-09-10 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dynarr-ptr.c: New file.
* gdb.dwarf2/dynarr-ptr.exp: New file.
2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
of 30 rather than hardcoding 120 for a slow test case. Take the
`gdb,timeout' target setting into account for this calculation.
Don't extend the timeout for the test cases that don't need it.
2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.reverse/sigall-reverse.exp: Increase the timeout by
a factor of 2 for a slow test case. Take the `gdb,timeout'
target setting into account for this calculation.
* gdb.reverse/until-precsave.exp: Increase the timeout by
a factor of 15 and 3 respectively rather than adding 120
for a pair of slow test cases. Take the `gdb,timeout'
target setting into account for this calculation.
2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
* lib/gdb.exp (gdb_test_multiple): Remove code to select the
timeout, don't pass one down to gdb_expect.
(gdb_expect): Rework timeout selection.
2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
* lib/gdbserver-support.exp (gdbserver_start): Throw an error
exception on timeout.
(gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
(gdbserver_start_extended): Catch any `gdbserver_start' error
exceptions.
(gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
* lib/mi-support.exp (mi_gdb_target_load): Catch any
`gdbserver_gdb_load' error exceptions.
2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
* lib/gdbserver-support.exp (gdbserver_start): Set timeout to
120 on waiting for the TCP socket to open.
2014-09-09 Doug Evans <xdje42@gmail.com>
* gdb.base/default.exp (show_conv_list): Add _caller_is,
_caller_matches, _any_caller_is, _any_caller_matches.
2014-09-09 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
2014-09-09 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-display.exp: Set print symbol off.
2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
PR gdb/17035
* gdb.base/commands.exp: Add tests to verify user-defined
commands with empty bodies.
* gdb.python/py-cmd.exp: Test that we don't show user-defined
python commands in `show user command`.
* gdb.python/scm-cmd.exp: Test that we don't show user-defined
scheme commands in `show user command`.
2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
PR python/17355
* gdb.python/amd64-py-framefilter-invalidarg.S: New file.
* gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
* gdb.python/py-framefilter-invalidarg.exp: New file.
* gdb.python/py-framefilter-invalidarg.py: New file.
2014-09-06 Doug Evans <xdje42@gmail.com>
PR 15276
* gdb.python/py-caller-is.c: New file.
* gdb.python/py-caller-is.exp: New file.
2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/17235
* gdb.arch/amd64-stap-wrong-subexp.exp: New file.
* gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
PR fortran/17237
* gdb.fortran/print-formatted.exp: New file.
* gdb.fortran/print-formatted.f90: Likewise.
2014-09-03 Sasha Smundak <asmundak@google.com>
* gdb.python/py-frame.exp: Test Frame.read_register.
2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
PR python/16699
* gdb.python/py-completion.exp: New file.
* gdb.python/py-completion.py: Likewise.
2014-08-28 Doug Evans <dje@google.com>
* gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
eax,etc. are live with values set by gdb and thus the compiler can't
use them.
* gdb.arch/i386-pseudo.c (main): Ditto.
2014-08-27 Doug Evans <dje@google.com>
* lib/gdb.exp (gdb_compile_shlib): Add support for clang.
2014-08-25 Doug Evans <dje@google.com>
* gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
(main): Ditto.
2014-08-25 Doug Evans <dje@google.com>
* gdb.threads/thread-execl.exp: #include <stdio.h>.
2014-08-24 Yao Qi <yao@codesourcery.com>
* gdb.guile/scm-value.exp (test_lazy_strings): Set print
symbol off.
* gdb.python/py-value.exp (test_lazy_strings): Likewise.
2014-08-22 Doug Evans <dje@google.com>
PR 17276
* gdb.dwarf2/dw2-single-line-discriminators.S: New file.
* gdb.dwarf2/dw2-single-line-discriminators.c: New file.
* gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
2014-08-22 Yao Qi <yao@codesourcery.com>
* gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
* gdb.python/py-finish-breakpoint2.exp: Likewise.
* gdb.python/python.exp: Likewise. Use .py file on the host
instead of the build.
2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/gcore-stale-thread.c: New file.
* gdb.threads/gcore-stale-thread.exp: New file.
2014-08-21 Pedro Alves <palves@redhat.com>
* gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
* gdb.base/gcore-relro-pie.exp: Likewise.
* gdb.base/gcore-relro.exp: Likewise.
* gdb.base/gcore.exp: Likewise.
* gdb.base/print-symbol-loading.exp: Likewise.
* gdb.threads/gcore-thread.exp: Likewise.
* lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
2014-08-20 Pedro Alves <palves@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (EXTRA_RULES, CC): New variables, get from
configure.
(EXPECT): Handle READ1 being set.
(all): Depend on EXTRA_RULES.
(check-read1, expect-read1, read1.so, read1): New rules.
* README (Testsuite Parameters): Document the READ1 make variable.
(Race detection): New section.
* configure: Regenerate.
* configure.ac: If build==host==target, and running under a
GNU/glibc system, add read1 to the extra Makefile rules.
(EXTRA_RULES): AC_SUBST it.
* lib/read1.c: New file.
2014-08-20 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/data-loc.exp: Add additional tests exercising
the handling of variables declared as a typedef to an array
which a DW_AT_data_location attribute.
2014-08-19 Andrew Burgess <aburgess@broadcom.com>
Pedro Alves <palves@redhat.com>
PR symtab/14604
PR symtab/14605
* gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
gdb_test.
2014-08-19 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
2014-08-19 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
right line.
2014-08-18 David Blaikie <dblaikie@gmail.com>
* boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
2014-08-18 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
attribute in array range.
2014-08-18 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
PR c++/17132
* gdb.cp/pr17132.cc: New file.
* gdb.cp/pr17132.exp: New file.
2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-xmethods.py (A_getarrayind)
(E_method_char_worker.__call__, E_method_int_worker.__call__):
Use 'print' with function call syntax.
(E_method_matcher.match): Fix tab vs space indentation mixup.
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
false.
2014-08-15 Yao Qi <yao@codesourcery.com>
* gdb.cp/casts.exp: Set print symbol off.
* gdb.cp/class2.exp: Likewise.
* gdb.cp/overload.exp: Likewise.
* gdb.cp/templates.exp: Likewise.
2014-08-11 Doug Evans <dje@google.com>
* gdb.base/print-symbol-loading.exp (test_load_core): Update.
(test_load_shlib): Update.
2014-08-09 Yao Qi <yao@codesourcery.com>
* gdb.base/display.exp: Invoke is_address_zero_readable.
* gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* gdb.base/hbreak-unmapped.exp: Return if
is_address_zero_readable returns true.
* gdb.base/signest.exp: Likewise.
* gdb.base/signull.exp: Likewise.
* gdb.base/sigbpt.exp: Likewise.
* gdb.guile/scm-disasm.exp: Do the test if
is_address_zero_readable returns false.
* gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
* gdb.python/py-arch.exp: Likewise.
* gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
* lib/gdb.exp (is_address_zero_readable): New proc.
2014-08-09 Yao Qi <yao@codesourcery.com>
PR testsuite/13443
* gdb.mi/mi-var-display.exp: Make test messages unique.
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
target 0".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
"target_resume".
2014-08-01 Joel Brobecker <brobecker@adacore.com>
* gdb.base/vla-datatypes.c (vla_factory): Add new variable
inner_vla_struct_object_size.
* gdb.base/vla-datatypes.exp: Adjust last test, and mark it
as xfail.
2014-07-30 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.exp (test): Add
comment.
2014-07-29 Yao Qi <yao@codesourcery.com>
PR gdb/17206
* gdb.base/until-nodebug.exp: New.
2014-07-28 Doug Evans <xdje42@gmail.com>
PR guile/17203
* gdb.guile/scm-parameter.exp: Add tests for trying to create
previously existing parameter, and previously ambiguously spelled
parameter.
2014-07-28 Will Newton <will.newton@linaro.org>
* gdb.base/varargs.exp: Remove KFAILs for ARM.
2014-07-26 Ludovic Courtès <ludo@gnu.org>
Doug Evans <xdje42@gmail.com>
PR guile/17146
* gdb.guile/types-module.exp: Add tests for wrong type arguments.
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-command-handle-nopass.c: New file.
* gdb.threads/signal-command-handle-nopass.exp: New file.
* gdb.threads/signal-command-multiple-signals-pending.c: New file.
* gdb.threads/signal-command-multiple-signals-pending.exp: New file.
* gdb.threads/signal-delivered-right-thread.c: New file.
* gdb.threads/signal-delivered-right-thread.exp: New file.
2014-07-25 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.exp
(cancel_pagination_in_target_event): Remove '-notransfer <return>'
match.
(cancel_pagination_in_target_event): Rework double prompt
detection.
* gdb.base/paginate-after-ctrl-c-running.exp
(test_ctrlc_while_target_running_paginates): Remove '-notransfer
<return>' match.
* gdb.base/paginate-bg-execution.exp
(test_bg_execution_pagination_return)
(test_bg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-execution-startup.exp
(test_fg_execution_pagination_return)
(test_fg_execution_pagination_cancel): Remove '-notransfer
<return>' matches.
* gdb.base/paginate-inferior-exit.exp
(test_paginate_inferior_exited): Remove '-notransfer <return>'
match.
* lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
* lib/gdb.exp (pagination_prompt): Run text through
string_to_regexp.
(gdb_test_multiple): Match $pagination_prompt instead of
"<return>".
(string_to_regexp): Move to lib/gdb-utils.exp.
2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-entry-value-paramref.S: New file.
* gdb.arch/amd64-entry-value-paramref.cc: New file.
* gdb.arch/amd64-entry-value-paramref.exp: New file.
* gdb.arch/amd64-optimout-repeat.S: New file.
* gdb.arch/amd64-optimout-repeat.c: New file.
* gdb.arch/amd64-optimout-repeat.exp: New file.
2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/17170
* gdb.base/statistics.exp: New file.
2014-07-17 Doug Evans <dje@google.com>
PR gdb/17170
* gdb.base/maint.exp: Update testing of per-command stats.
2014-07-16 Pedro Alves <palves@redhat.com>
* gdb.trace/tfile.c: Include unistd.h and stdint.h.
(start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
(tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
(tfile_write_buf): New functions.
(add_memory_block): Rewrite using the above.
(adjust_function_address): New function.
(FUNCTION_ADDRESS): New macro.
(write_basic_trace_file): Remove short_x local, and use
tfile_write_16. Change type of func_addr local to unsigned long
long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
here. Cast argument of add_memory_block to char pointer.
(write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
(main): Remove parameters.
* gdb.trace/tfile.exp: Remove nowarnings.
2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
* gdb.base/debug-expr.exp: Test string evaluation with
"debug expression" on.
2014-07-15 Pedro Alves <palves@redhat.com>
* gdb.base/reread.exp: Use clean_restart.
2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
* gdb.arch/avr-flash-qualifer.c: New.
* gdb.arch/avr-flash-qualifer.exp: New.
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/paginate-after-ctrl-c-running.c: New file.
* gdb.base/paginate-after-ctrl-c-running.exp: New file.
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/double-prompt-target-event-error.c: New file.
* gdb.base/double-prompt-target-event-error.exp: New file.
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-inferior-exit.c: New file.
* gdb.base/paginate-inferior-exit.exp: New file.
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-bg-execution.c: New file.
* gdb.base/paginate-bg-execution.exp: New file.
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* gdb.base/paginate-execution-startup.c: New file.
* gdb.base/paginate-execution-startup.exp: New file.
* lib/gdb.exp (pagination_prompt): New global.
(default_gdb_spawn): New procedure, factored out from
default_gdb_spawn.
(default_gdb_start): Adjust to call default_gdb_spawn.
(gdb_spawn): New procedure.
2014-07-14 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_assert): New procedure.
* gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
2014-07-14 Pedro Alves <palves@redhat.com>
* gdb.base/execution-termios.c: New file.
* gdb.base/execution-termios.exp: New file.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.cp/vla-cxx.cc: New file.
* gdb.cp/vla-cxx.exp: New file.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.reverse/rerun-prec.c: New file.
* gdb.reverse/rerun-prec.exp: New file.
2014-07-12 Maciej W. Rozycki <macro@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* lib/gdb-utils.exp: New file.
* lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
inline `gdb_init_command' processing.
(gdb_start_cmd): Likewise.
* lib/mi-support.exp (mi_run_cmd): Likewise.
* README: Document `gdb_init_command' and `gdb_init_commands'.
2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix false FAIL running under a very long directory name.
* gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
and "set print elements 10000". Twice.
2014-07-11 Yao Qi <yao@codesourcery.com>
* gdb.base/exprs.exp: "set print symbol off".
2014-07-11 Pedro Alves <palves@redhat.com>
* gdb.threads/kill.c: New file.
* gdb.threads/kill.exp: New file.
2014-07-10 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c (write_basic_trace_file)
[__thumb__||__thumb2__]: Clear the Thumb bit of the function
address written to trace file.
2014-07-09 Pedro Alves <palves@redhat.com>
* gdb.base/attach-wait-input.exp: New file.
* gdb.base/attach-wait-input.c: New file.
2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
* gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
setting up test structures.
(main): Call new test function.
* gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
test function, continue into test function and walk test
structures.
2014-07-02 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.c: Define labels 'foo_start' and
'bar_start' at the beginning of functions 'foo' and 'bar'
respectively.
* gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
instead of 'foo' and 'bar'.
2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/segv.exp: New.
* gdb.btrace/segv.c: New.
2014-07-02 Luis Machado <lgustavo@codesourcery.com>
* gdb.trace/entry-values.exp: Handle powerpc-specific branch
instruction.
2014-06-30 Mark Wielaard <mjw@redhat.com>
* gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
vulture, vilify, villar): New volatile array constants.
(vindictive, vegetation): New const volatile array constants.
* gdb.base/volatile.exp: Test volatile and const volatile array
types.
2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
target lacks support for awatch, rwatch, or hbreak.
2014-06-27 Yao Qi <yao@codesourcery.com>
* gdb.multi/dummy-frame-restore.exp: New.
* gdb.multi/dummy-frame-restore.c: New.
2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/gcore.exp: New.
2014-06-23 Pedro Alves <palves@redhat.com>
* gdb.base/watchpoint-reuse-slot.c: New file.
* gdb.base/watchpoint-reuse-slot.exp: New file.
2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-xmethods.exp: Use "progspace" instead of the
progspace's filename in 'info', 'enable' and 'disable' command
tests.
2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
* gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
2014-06-20 Gary Benson <gbenson@redhat.com>
* gdb.arch/i386-avx.exp: Fix include file location.
* gdb.arch/i386-sse.exp: Likewise.
2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/expression.exp: New file.
2014-06-19 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): New procedure, factored
out from ...
(top level): ... here. Iterate running tests under different
scheduler-locking settings.
2014-06-18 Luis Machado <lgustavo@codesourcery.com>
* gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
to DW_FORM_addr and use non-zero addresses.
2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
PR gdb/17017
* gdb.python/py-xmethods.cc: Add global function call counters and
increment them in their respective functions. Remove "cout"
statements.
* gdb.python/py-xmethods.exp: Make tests check the global function
call counters instead of depending on inferior IO.
2014-06-18 Don Breazeal <donb@codesourcery.com>
* gdb.base/foll-fork.exp (default_fork_parent_follow):
Deleted procedure.
(explicit_fork_parent_follow): Deleted procedure.
(explicit_fork_child_follow): Deleted procedure.
(test_follow_fork): New procedure.
(do_fork_tests): Replace calls to deleted procedures with
calls to test_follow_fork and reset GDB for subsequent
procedure calls.
2014-06-17 Yao Qi <yao@codesourcery.com>
* gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
CP1252.
2014-06-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
Initialize ptr and S explicitly.
(skip_type_update_when_not_use_rtti_test): Likewise.
2014-06-16 Keith Seitz <keiths@redhat.com>
PR mi/15863
* gdb.mi/mi-var-cmd.exp: Add test for -var-update before
the inferior is started.
2014-06-16 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.c: New file.
* gdb.base/break-main-file-remove-fail.exp: New file.
* gdb.base/break-unload-file.exp: Use build_executable instead of
prepare_for_testing.
(test_break): New parameter "initial_load". Handle it.
(top level): Add initial_load cmdline/file axis.
2014-06-12 Tom Tromey <tromey@redhat.com>
* gdb.base/completion.exp: Don't use directory name in test.
2014-06-09 Gary Benson <gbenson@redhat.com>
* gdb.base/sigall.c [Functions to send signals]: Reorder to
separate the always-available ANSI-standard signals from the
signals that require checking.
(main): Likewise.
* gdb.reverse/sigall-reverse.c [Functions to send signals]:
Likewise.
(main): Likewise.
2014-06-07 Keith Seitz <keiths@redhat.com>
Revert:
PR c++/16253
* gdb.cp/var-tag.cc: New file.
* gdb.cp/var-tag.exp: New file.
* gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
* gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
* gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
* gdb.dwarf2/dw2-inheritance.exp: Likewise.
2014-06-06 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
2014-06-06 Pedro Alves <palves@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
in target debug output instead of looking at RSP packets,
disabling the test on any target that uses hardware stepping.
Update comments.
2014-06-06 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.exp: Fix typo.
2014-06-06 Yao Qi <yao@codesourcery.com>
* gdb.base/jit.exp (one_jit_test): Restrict the pattern
from "jit_function" to "^jit_function".
2014-06-06 Yao Qi <yao@codesourcery.com>
* gdb.base/async.c (foo): Add one statement.
* gdb.base/async.exp: Get the next instruction address and
match the output of "nexti" by instruction address. Match
the hex address in the output of "finish".
2014-06-06 Gary Benson <gbenson@redhat.com>
* gdb.base/call-signals.c: Remove preprocessor conditionals
for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
SIGSEGV and SIGTERM.
* gdb.base/sigall.c: Likewise.
* gdb.base/unwindonsignal.c: Likewise.
* gdb.reverse/sigall-reverse.c: Likewise.
2014-06-06 Yao Qi <yao@codesourcery.com>
* gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
readable, skip the test.
2014-06-06 Yao Qi <yao@codesourcery.com>
* gdb.threads/staticthreads.c (thread_function): Move the line
setting breakpoint on forward.
* gdb.threads/staticthreads.exp: Update comments.
2014-06-05 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/scm-value.exp (test_value_in_inferior): Add test
"history-append! type error".
2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
* gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
erroneous dprintf expected input.
2014-06-04 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-generics.exp: Delete.
2014-06-04 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-breakpoint.exp: Update.
Add tests for breakpoint registration.
2014-06-04 Tom Tromey <tromey@redhat.com>
* gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
VLA-in-union.
* gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
inner_vla_struct, vla_union types. Initialize objects of those
types and compute their sizes.
2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
Hui Zhu <hui@codesourcery.com>
* gdb.base/fileio.exp: Add test for shell not available as well as
available.
* gdb.base/fileio.c (test_system): Check for shell twice.
2014-06-04 Yao Qi <yao@codesourcery.com>
* gdb.base/auto-connect-native-target.exp: Remove redundant
space from the regexp pattern.
2014-06-04 Yao Qi <yao@codesourcery.com>
* gdb.base/default.exp: Replace "child" with "native" in
regexp pattern.
2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-xmethods.cc: New testcase to test xmethods.
* gdb.python/py-xmethods.exp: New tests to test xmethods.
* gdb.python/py-xmethods.py: Python script supporting the
new testcase and tests.
2014-06-03 Joel Brobecker <brobecker@adacore.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/17000
* gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
* gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
* gdb.base/subst.exp: Add tests to verify partial path matching
output.
2014-06-03 Pedro Alves <palves@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
target that doesn't use software single-stepping.
2014-06-03 Pedro Alves <palves@redhat.com>
PR breakpoints/17000
* gdb.base/sss-bp-on-user-bp-2.c: New file.
* gdb.base/sss-bp-on-user-bp-2.exp: New file.
2014-06-02 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-parameter.exp: New file.
2014-06-02 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-cmd.c: New file.
* gdb.guile/scm-cmd.exp: New file.
2014-06-02 Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
pretty-printer lookup.
* gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
(make-pp_s-printer): Call it.
(make-pretty-printer-from-dict): New function.
(lookup-pretty-printer-maker-from-dict): New function.
(*pretty-printer*): Simplify.
(make-objfile-pp_s-printer): New function.
(install-objfile-pretty-printers!): New function.
(make-progspace-pp_s-printer): New function.
(install-progspace-pretty-printers!): New function.
* gdb.guile/scm-progspace.c: New file.
* gdb.guile/scm-progspace.exp: New file.
2014-06-02 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-bp-same-addr.c: New file.
* gdb.base/dprintf-bp-same-addr.exp: New file.
2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
* gdb.arch/powerpc-power.s: Likewise.
2014-06-02 Joel Brobecker <brobecker@adacore.com>
* gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
2014-06-01 Yao Qi <yao@codesourcery.com>
* gdb.base/watchpoint.exp (test_watch_location): Check null
pointer can be dereferenced. If not, do the test, otherwise
skip it.
2014-05-30 Andrew Burgess <aburgess@broadcom.com>
* gdb.arch/amd64-invalid-stack-middle.exp: Update expected
results.
* gdb.arch/amd64-invalid-stack-top.exp: Likewise.
2014-05-30 Andrew Burgess <aburgess@broadcom.com>
* gdb.arch/amd64-invalid-stack-middle.S: New file.
* gdb.arch/amd64-invalid-stack-middle.c: New file.
* gdb.arch/amd64-invalid-stack-middle.exp: New file.
* gdb.arch/amd64-invalid-stack-top.c: New file.
* gdb.arch/amd64-invalid-stack-top.exp: New file.
2014-05-30 Pedro Alves <palves@redhat.com>
PR breakpoints/17000
* gdb.base/sss-bp-on-user-bp.c: New file.
* gdb.base/sss-bp-on-user-bp.exp: New file.
2014-05-30 David Blaikie <dblaikie@gmail.com>
* gdb.opt/inline-break.c: Fix clang compatibility by specifying
gnu_inline semantics via attribute.
* gdb.opt/inline-break.exp: Remove -std=c89 now that the test
source explicitly specifies the required semantics.
2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.reverse/sigall-reverse.exp: Fix a typo.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
2014-05-29 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
reason, even in sync mode.
2014-05-29 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR PR15693
* gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
* gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
* gdb.mi/mi-condbreak-call-thr-state.c: New file.
* gdb.mi/mi-condbreak-call-thr-state.exp: New file.
2014-05-28 Joel Brobecker <brobecker@adacore.com>
* config/monitor.exp (gdb_target_monitor): Replace use of
"set remotebaud" by "set serial baud".
2014-05-26 Andy Wingo <wingo@igalia.com>
* gdb.guile/scm-breakpoint.exp:
* gdb.guile/scm-gsmob.exp: Update to use plain old object
properties instead of gdb-object-properties.
2014-05-26 Yao Qi <yao@codesourcery.com>
* gdb.server/no-thread-db.exp: Specify source file name
explicitly when setting a breakpoint.
2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/vdso.c: New.
* gdb.btrace/vdso.exp: New.
2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
* gdb.base/gcore.exp (capture_command_output): Move ...
* lib/gdb.exp (capture_command_output): ... here.
2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/data.exp: Test memory access during btrace replay.
2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_run_cmd_full): Add comments.
2014-05-21 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
(top level): Test that output related to execution commands is
sent to the console with CLI commands, but not with MI commands.
Test that breakpoint events are always mirrored to the console.
Also expect the new source line to be output after a "next" in
async mode too. Make it a pass/fail test.
* gdb.mi/mi-solib.exp: Test that the CLI solib event note is
output.
* lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.base/list.exp (build_pattern, test_list): New procedures.
Use them to test variations of "list" after reaching a breakpoint.
* gdb.mi/mi-cli.exp (line_main_callme_2): New global.
Test "list" with listsize 10 after reaching a breakpoint.
* gdb.python/python.exp (decode_line current location line
number): Adjust expected line number.
2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_run_cmd_full): Revert to original
behavior for $args, pass it directly to "run".
2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
* lib/gdb.exp (default_gdb_init): Bump `match_max' up from
30000 to 65536.
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Test "target native" instead of "target
child".
2014-05-21 Mark Wielaard <mjw@redhat.com>
* gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
<HAVE_TLS> (thread_function, main): Initialize it.
* gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
Add clean_restart.
<$have_tls != "">: Check TLSVAR.
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.base/dcache-line-read-error.c: New.
* gdb.base/dcache-line-read-error.exp: New.
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/compare-sections.c: New file.
* gdb.base/compare-sections.exp: New file.
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/break-idempotent.c: New file.
* gdb.base/break-idempotent.exp: New file.
2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/nohist.exp: New.
2014-05-20 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_init): Set timeout if test file is under
gdb.reverse directory and gdb_reverse_timeout exists in board
setting.
* README: Document gdb_reverse_timeout.
2014-05-20 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (default_gdb_init): Rename argument 'args' by
'test_file_name'. Treat args as a string instead of a list.
(gdb_init): Rename argument 'args' by 'test_file_name'.
2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/powerpc-power.exp: New file.
* gdb.arch/powerpc-power.s: New file.
2014-05-16 Doug Evans <dje@google.com>
* gdb.base/Makefile.in (EXECUTABLES): Add completion.
* gdb.base/completion.exp: Check that all expected files exist
before doing file completion.
2014-05-16 Doug Evans <dje@google.com>
* gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
Update.
(do_syscall_tests_without_xml): Update.
2014-05-16 Pedro Alves <palves@redhat.com>
* lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
instead of "unknown output after running".
2014-05-16 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
file1.txt from host at the end.
* gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
2014-05-15 Doug Evans <dje@google.com>
* gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
* gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
loading file. Add test for TU lookup.
2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_run_cmd_full): Set arguments by
calling "-exec-arguments" or "set args" before running the
inferior.
2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
* lib/mi-support.exp (mi_expect_stop): Expect message for
inferiors that exit with non-zero exit code.
2014-05-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
match absolute path on remote host.
(test_file_list_exec_source_files): Remove "/" from the
pattern.
2014-05-14 Yao Qi <yao@codesourcery.com>
* boards/local-remote-host-notty.exp (${board}_file): New
proc.
2014-05-07 Kyle McMartin <kyle@redhat.com>
Pushed by Joel Brobecker <brobecker@adacore.com>.
* gdb.arch/aarch64-atomic-inst.c: New file.
* gdb.arch/aarch64-atomic-inst.exp: New file.
2014-05-07 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
in current context" too.
2014-05-05 Keith Seitz <keiths@redhat.com>
* gdb.linespec/ls-dollar.exp: Add test for linespec
file:convenience_variable.
2014-05-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/unavailable.exp (gdb_collect_args_test): Save
traceframes into tfile and ctf trace files. Read data from
trace file and test collected data.
(gdb_collect_locals_test): Likewise.
(gdb_unavailable_registers_test): Likewise.
(gdb_unavailable_floats): Likewise.
(gdb_collect_globals_test): Likewise.
(top-level): Append "ctf" to trace_file_targets if GDB
supports.
2014-05-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
code to ...
(gdb_collect_args_test_1): ... it. New proc.
(gdb_collect_locals_test): Move some code to ...
(gdb_collect_locals_test_1): ... it. New proc.
(gdb_unavailable_registers_test): Move some code to ...
(gdb_unavailable_registers_test_1): ... it. New proc.
(gdb_unavailable_floats): Move some code to ...
(gdb_unavailable_floats_1): ... it. New proc.
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/amd64-stap-optional-prefix.S (main): Add several
probes to test for bitness recognition.
* gdb.arch/amd64-stap-optional-prefix.exp
(test_probe_value_without_reg): New procedure.
Add code to test for different kinds of bitness.
2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/16889
* gdb.arch/amd64-stap-optional-prefix.S: New file.
* gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
2014-05-01 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_load): Extend comment. Skip calling
gdb_file_cmd if no file is specified.
* boards/native-extended-gdbserver.exp (gdb_load): Use the
last_loaded_file to set the remote exec-file.
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: New file.
2014-05-01 Pedro Alves <palves@redhat.com>
* boards/local-remote-host.exp: Rename to ...
* boards/local-remote-host-notty.exp: ... this.
2014-04-28 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/dyn_arrayidx: New testcase.
2014-04-26 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
and compute the length of function main. Save it in
$main_length.
(Dwarf::assemble): Use $main_length instead of hard-coded 10.
(top-level): Use gdb_compile to compile objects into
executable and restart GDB. Remove invocation to
prepare_for_testing.
2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
Pedro Alves <palves@redhat.com>
PR server/16255
* gdb.multi/multi-attach.c: New file.
* gdb.multi/multi-attach.exp: New file.
2014-04-25 Pedro Alves <palves@redhat.com>
* gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
user.
(top level): Test that "set remote conditional-breakpoints-packet
off" works as intended.
* gdb.base/dprintf.exp: Test that "set remote
breakpoint-commands-packet off" works as intended.
* gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
New function.
(top level): Call it.
* gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
remote fast-tracepoints-packet off" works as intended.
* gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.base/catch-syscall.c: Make unreferenced statics non-static to
ensure clang would not discard them.
* gdb.base/gdbvars.c: Ditto.
* gdb.base/memattr.c: Ditto.
* gdb.base/whatis.c: Ditto.
* gdb.python/py-prettyprint.c: Ditto.
* gdb.trace/actions.c: Ditto.
* gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
ensure clang would not discard it.
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
clang to emit the full definition of type required by the test
* gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
coax Clang into emitting the definition of the type.
* gdb.cp/pr10728-x.h (y): Ditto.
* gdb.cp/pr10728-y.cc (y): Ditto.
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.base/label.exp: XFAIL label related tests under Clang.
* gdb.cp/cplabel.exp: Ditto.
* gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
under Clang those using labels.
2014-04-25 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
double_label.
* gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
partial_label and double_label.
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
2014-04-24 David Blaikie <dblaikie@gmail.com>
* gdb.cp/cpexprs.cc: Move braces to the same line as the start
of the function to work across GCC and Clang.
* gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
pointer types (const void ** const V void **).
2014-04-24 Michael Sturm <michael.sturm@mintel.com>
Walfred Tedeschi <walfred.tedeschi@intel.com>
* Makefile.in (EXECUTABLES): Added i386-avx512.
* gdb.arch/i386-avx512.c: New file.
* gdb.arch/i386-avx512.exp: Likewise.
2014-04-23 Keith Seitz <keiths@redhat.com>
* lib/mi-support.exp (mi_list_breakpoints): Delete.
(mi_make_breakpoint_table): New procedure.
(mi_create_breakpoint): Use mi_make_breakpoint
and return the result.
(mi_make_breakpoint): New procedure.
(mi_build_kv_pairs): New procedure.
* gdb.mi/mi-break.exp: Remove unused globals,
update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
All callers updated.
* gdb.mi/mi-dprintf.exp: Use variable to track command
number.
Update all callers of mi_create_breakpoint and use
mi_make_breakpoint_table.
Remove any unused global variables.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-reverse.exp: Likewise.
* gdb.mi/mi-simplerun.exp: Likewise.
* gdb.mi/mi-stepn.exp: Likewise.
* gdb.mi/mi-syn-frame.exp: Likewise.
* gdb.mi/mi-until.exp: Likewise.
* gdb.mi/mi-var-cp.exp: Likewise.
* gdb.mi/mi-var-display.exp: Likewise.
* gdb.mi/mi2-amd64-entry-value.exp: Likewise.
* gdb.mi/mi2-var-child.exp: Likewise.
* gdb.mi/mi-vla-c99.exp: Likewise.
* lib/mi-support.exp: Likewise.
From Ian Lance Taylor <iant@cygnus.com>:
* lib/gdb.exp (parse_args): New procedure.
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/break-unload-file.c: New file.
* gdb.base/break-unload-file.exp: New file.
* gdb.base/sym-file-lib.c (baz): New function.
* gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
field.
(load): Store the segment's mapped size.
(unload): New function.
(unload_shlib): New function.
* gdb.base/sym-file-loader.h (unload_shlib): New declaration.
* gdb.base/sym-file-main.c (main): Unload, and reload the library,
set a breakpoint at baz, and call it.
* gdb.base/sym-file.exp: New tests for stale breakpoint
instructions.
2014-04-23 Pedro Alves <palves@redhat.com>
* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
* gdb.base/hbreak-in-shr-unsupported.c: New file.
* gdb.base/hbreak-in-shr-unsupported.exp: New file.
* gdb.base/hbreak-unmapped.c: New file.
* gdb.base/hbreak-unmapped.exp: New file.
* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
* lib/gdb.exp (gdb_is_target_remote): ... here.
2014-04-22 Pedro Alves <palves@redhat.com>
* gdb.base/consecutive-step-over.c: New file.
* gdb.base/consecutive-step-over.exp: New file.
2014-04-22 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
instead of send_gdb/gdb_expect.
2014-04-22 Yao Qi <yao@codesourcery.com>
* lib/trace-support.exp (generate_tracefile): New procedure.
* gdb.trace/tfile.exp: Skip the test if generate_tracefile
return 0.
* gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
if generate_tracefile returns 1.
2014-04-18 Tom Tromey <palves@redhat.com>
Pedro alves <tromey@redhat.com>
PR backtrace/15558
* gdb.opt/inline-bt.exp: Test backtracing from an inline function
with a backtrace limit.
* gdb.python/py-frame-inline.exp: Test running to an inline
function with a backtrace limit, and printing the newest frame.
* gdb.python/py-frame-inline.c (main): Call f.
2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
* gdb.java/jnpe.exp: Drop srcdir from untested path.
2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
* lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
Drop prefix from unsupported source file path.
2014-04-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (with_target_charset): New proc.
* gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
with_target_charset.
(test_print_strings): Likewise.
(test_repeat_bytes): Likewise.
* gdb.base/setvar.exp: Set target-charset to ASCII temporarily
for some tests.
2014-04-16 Keith Seitz <keiths@redhat.com>
PR gdb/15827
* gdb.dwarf2/corrupt.c: New file.
* gdb.dwarf2/corrupt.exp: New file.
2014-04-16 Keith Seitz <keiths@redhat.com>
PR c++/16597
* gdb.cp/namelessclass.cc: New file.
* gdb.cp/namelessclass.exp: New file.
* gdb.cp/namelessclass.S: New file.
2014-04-16 Doug Evans <dje@google.com>
* lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
Add comment.
(gdbserver_default_get_comm_port): New function.
(gdbserver_start): Check if board file provided
"gdbserver,get_comm_port" and use it if so.
* boards/native-stdio-gdbserver.exp (sockethost): Set to "".
(gdb,socketport): Set to "stdio".
(gdbserver,get_comm_port): Set to ${board}_get_comm_port.
(stdio_gdbserver_template): Delete.
(${board}_get_remote_address): Update.
(${board}_build_remote_cmd): Delete.
(${board}_get_comm_port): New function.
(${board}_spawn): Update.
* boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
Delete.
(${board}_get_remote_address): Update.
(${board}_get_comm_port): New function.
2014-04-16 Andrew Burgess <aburgess@broadcom.com>
* gdb.base/memattr.exp: Improve regexps to handle memory regions
appearing in any order.
2014-04-15 Doug Evans <dje@google.com>
* gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
uninitialized value of "description".
2014-04-15 Keith Seitz <keiths@redhat.com>
* gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
Remove unused globals.
(test_running_the_program): Likewise.
(test_controlled_execution): Likewise.
(test_controlling_breakpoints): Likewise.
(test_program_termination): Likewise.
2014-04-15 Keith Seitz <keiths@redhat.com>
* gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
unused globals.
(test_rbreak_creation_and_listing): Likewise.
(test_ignore_count): Likewise.
(test_error): Likewise.
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
<ansidecl.h>, <elf/common.h> and <elf/external.h> to
sym-file-loader.c.
(Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
(Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
to sym-file-loader.c.
(struct library): Forward declare.
(load_shlib, lookup_function): Change prototypes.
(find_shstrtab, find_strtab, find_shdr, find_symtab)
(translate_offset): Remove declarations.
(get_text_addr): New declaration.
* gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
<ansidecl.h>, <elf/common.h> and <elf/external.h> here from
sym-file-loader.h.
(Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
(Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
here from sym-file-loader.h.
(struct library): New structure.
(load_shlib, lookup_function): Change prototypes and adjust to
work with a struct library.
(find_shstrtab, find_strtab, find_shdr, find_symtab)
(translate_offset): Make static.
(get_text_addr): New function.
* gdb.base/sym-file-main.c (main): Adjust to new loader interface.
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file-loader.c: Include <limits.h>.
(SELF_LINK): New define.
(get_origin): New function.
(load_shlib): Use it.
* gdb.base/sym-file.exp: Don't early return if the target is
remote. Use runto_main, and issue fail is that fails. Use
gdb_load_shlibs.
(shlib_name): Delete.
(lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
2014-04-15 Pedro Alves <palves@redhat.com>
* gdb.base/sym-file.exp: Remove regex characters from test
message. Don't refer to breakpoint numbers in test messages.
2014-04-14 Keith Seitz <keiths@redhat.com>
PR c++/16253
* gdb.cp/var-tag.cc: New file.
* gdb.cp/var-tag.exp: New file.
* gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
* gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
* gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
* gdb.dwarf2/dw2-inheritance.exp: Likewise.
2014-04-14 Tom Tromey <tromey@redhat.com>
* gdb.cp/classes.exp (test_enums): Handle underlying type.
* gdb.dwarf2/enum-type.exp: Add test for enum with underlying
type.
* gdb.cp/enum-class.exp: New file.
* gdb.cp/enum-class.cc: New file.
2014-04-14 Tom Tromey <tromey@redhat.com>
* gdb.dwarf2/enum-type.exp: New file.
2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.dwarf2/count.exp: New file.
2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
2014-04-14 David Blaikie <dblaikie@gmail.com>
* gdb.mi/non-stop.c: Add return value for non-void function return
statement.
* gdb.threads/staticthreads.c: Ditto.
2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-value.c: Improve test case.
* gdb.guile/scm-value.exp: Add new test.
2014-04-11 David Blaikie <dblaikie@gmail.com>
* gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
override Clang's default.
2014-04-11 Joel Brobecker <brobecker@adacore.com>
Revert the following changes (regressions):
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
* gdb.dwarf2/count.exp: New file.
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
2014-04-11 Keith Seitz <keiths@redhat.com>
PR c++/16675
* gdb.cp/cpsizeof.exp: New file.
* gdb.cp/cpsizeof.cc: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.mi/mi-vla-c99.exp: New file.
* gdb.mi/vla.c: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-datatypes.c: New file.
* gdb.base/vla-datatypes.exp: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-ptr.c: New file.
* gdb.base/vla-ptr.exp: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-multi.c: New file.
* gdb.base/vla-multi.exp: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.dwarf2/count.exp: New file.
2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
* gdb.base/vla-sideeffect.c: New file.
* gdb.base/vla-sideeffect.exp: New file.
2014-04-11 Yao Qi <yao@codesourcery.com>
* gdb.base/completion.exp: Check file exists before running tests
on file completion.
2014-04-10 Pedro Alves <palves@redhat.com>
* gdb.base/cond-eval-mode.c: New file.
* gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
prepare_for_testing to build the new file. Check result of
runto_main.
(test_break, test_watch): New procedures.
(top level): Use them.
2014-04-08 Pierre Muller <muller@sourceware.org>
* gdb.base/printcmds.exp (test_artificial_arrays): Disable
Ctrl-V use for mingw hosts.
2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-value.c: Improve test case.
* gdb.python/py-value.exp: Add new test.
2014-04-07 David Blaikie <dblaikie@gmail.com>
* lib/compiler.c: Identify the clang compiler.
* lib/compiler.cc: Ditto.
2014-04-03 Yao Qi <yao@codesourcery.com>
* gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
2014-04-01 Anton Blanchard <anton@samba.org>
* gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
messages unique.
2014-04-01 Anton Blanchard <anton@samba.org>
* gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
prepare_for_testing.
2014-04-01 Anton Blanchard <anton@samba.org>
* gdb.arch/ppc64-atomic-inst.c: Remove.
* gdb.arch/ppc64-atomic-inst.S: New file.
* gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
2014-03-31 Doug Evans <dje@google.com>
* gdb.base/print-symbol-loading-lib.c: New file.
* gdb.base/print-symbol-loading-main.c: New file.
* gdb.base/print-symbol-loading.exp: New file.
2014-03-31 Yao Qi <yao@codesourcery.com>
* gdb.base/source-dir.exp: Allow ';' as a directory separator.
2014-03-28 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/mi_dyn_arr: New testcase.
2014-03-27 Doug Evans <dje@google.com>
* gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
2014-03-27 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (can_single_step_to_signal_handler): Return zero
if target is nios2-*-*.
2014-03-26 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (readline_is_used): New proc.
* gdb.base/completion.exp: Move tests on command complete up.
Skip the rest of tests if readline is not used.
* gdb.ada/complete.exp: Skp the test if readline is not
used.
* gdb.base/filesym.exp: Likewise.
* gdb.base/macscp.exp: Likewise.
* gdb.base/readline-ask.exp: Likewise.
* gdb.base/readline.exp: Likewise.
* gdb.python/py-cmd.exp: Likewise.
* gdb.trace/tfile.exp: Likewise.
2014-03-26 Yao Qi <yao@codesourcery.com>
* gdb.base/macscp.exp: Fix code format issues.
2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
* gdb.asm/powerpc64le.inc: New file.
2014-03-25 Pedro Alves <palves@redhat.com>
Doug Evans <dje@google.com>
* gdb.base/source-execution.c: New file.
* gdb.base/source-execution.exp: New file.
* gdb.base/source-execution.gdb: New file.
2014-03-24 Doug Evans <dje@google.com>
* gdb.linespec/macro-relative.exp: Mark the test as unsupported if
using fission.
2014-03-24 Hui Zhu <hui@codesourcery.com>
Pedro Alves <palves@redhat.com>
PR breakpoints/16101
* gdb.base/dprintf.exp: Use unsupported rather than changing the
test pass/fail messages. Detect missing support for dprintf when
breakpoints are actually inserted.
* gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
breakpoints are actually inserted.
* lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
fails.
2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
2014-03-22 Doug Evans <xdje42@gmail.com>
* gdb.python/python.exp (python not supported): Verify multi-line
python command issues an error.
* gdb.guile/guile.exp (guile not supported): Verify multi-line
guile command issues an error.
2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.threads/thread-specific.exp: Handle the lack of usable
$this_breakpoint and $this_thread.
2014-03-21 Hui Zhu <hui@codesourcery.com>
* gdb.base/attach.exp (do_command_attach_tests): New.
2014-03-20 Tom Tromey <tromey@redhat.com>
Pedro Alves <palves@redhat.com>
PR cli/15718
* gdb.base/condbreak-call-false.c: New file.
* gdb.base/condbreak-call-false.exp: New file.
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
Delete.
(block_signals, unblock_signals): Delete.
(child_function_2, main): Remove references to deleted variable
and functions.
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
Use pthread_kill to signal thread 2.
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
Adjust to make the test send itself a signal rather than using the
host's "kill" command.
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/multiple-step-overs.c: New file.
* gdb.threads/multiple-step-overs.exp: New file.
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
Adjust expected infrun debug output.
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-trips-on-watchpoint.c: New file.
* gdb.threads/step-over-trips-on-watchpoint.exp: New file.
2014-03-20 Pedro Alves <palves@redhat.com>
PR breakpoints/7143
* gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
of gdb_test_multiple.
* gdb.cp/annota2.exp: Remove kfail for gdb/38.
* gdb.cp/annota3.exp: Remove kfail for gdb/38.
2014-03-20 Pedro Alves <palves@redhat.com>
* gdb.threads/step-over-lands-on-breakpoint.c: New file.
* gdb.threads/step-over-lands-on-breakpoint.exp: New file.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp: Remove early return.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp (step& tests): Pass explicit test messages.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp (test_background): Expect \r\n after
"completed." in the fail pattern.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp (test_background): New procedure.
Use it for all background execution command tests.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp: Use prepare_for_testing.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
the same line.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.c (main): Add "jump here" and "until here" line
marker comments.
* gdb.base/async.exp (jump_here): New global.
(jump& test): Use it.
(until_here): New global.
(until& test): Use it.
2014-03-19 Pedro Alves <palves@redhat.com>
* gdb.base/async.exp: Don't frob gdb_protocol.
2014-03-18 Doug Evans <xdje42@gmail.com>
* gdb.base/async.exp: Whitespace fixes. Turn on target-async.
Fix spelling of exec-done-display.
2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/15358
* gdb.base/gdb-sigterm.c: New file.
* gdb.base/gdb-sigterm.exp: New file.
2014-03-18 Pedro Alves <palves@redhat.com>
PR gdb/13860
* gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
* lib/mi-support.exp (mi_expect_stop): Add special handling for
solib-event.
2014-03-17 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/pckd_arr_ren: New testcase.
2014-03-13 Doug Evans <xdje42@gmail.com>
PR guile/16612
* gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
collect after discarding symbols.
2014-03-13 Ludovic Courtès <ludo@gnu.org>
Doug Evans <xdje42@gmail.com>
* gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
to history survives a gc.
2014-03-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Don't test "target procfs".
2014-03-13 Pedro Alves <palves@redhat.com>
* gdb.base/default.exp: Update "target child" and "target procfs"
tests to not expect "Unix".
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
'func_start' and 'func_end' for the beginning and end of the
function code, respectively.
* gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
'func_end' instead of 'func' and 'main'.
2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
* gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
generate the debug info assembler source.
2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
* gdb.dwarf2/arr-subrange.exp: Likewise.
* gdb.dwarf2/dwz.exp: Likewise.
* gdb.dwarf2/method-ptr.exp: Likewise.
* gdb.dwarf2/missing-sig-type.exp: Likewise.
* gdb.dwarf2/subrange.exp: Likewise.
* gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
* gdb.dwarf2/implptrpiece.exp: Likewise.
* gdb.dwarf2/nostaticblock.exp: Likewise.
2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
* lib/gdb.exp (build_executable_from_specs): Don't prepend source
directory to absolute path name arguments.
2014-03-10 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/tagged_access: New testcase.
2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/data.exp: Update expected output.
2014-03-06 Yao Qi <yao@codesourcery.com>
* gdb.trace/pr16508.exp: New file.
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* gdb.base/breakpoint-shadow.exp (compare_disassembly): New
procedure.
(top level): Adjust to use it. Add tests that exercise breakpoint
interaction with the code-cache.
2014-02-26 Ludovic Courtès <ludo@gnu.org>
* gdb.guile/scm-value.exp (test_value_in_inferior): Add
test for 'history-append!'.
2014-02-26 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
* gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.c: New file.
* gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
2014-02-26 Joel Brobecker <brobecker@adacore.com>
* testsuite/gdb.python/py-pp-re-notag.c: New file.
* testsuite/gdb.python/py-pp-re-notag.ex: New file.
* testsuite/gdb.python/py-pp-re-notag.p: New file.
2014-02-26 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
2014-02-26 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/arr-stride.c: New file.
* gdb.dwarf2/arr-stride.exp: New file.
2014-02-26 Pedro Alves <palves@redhat.com>
* gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
that won't ever trigger. Make sure that GDB reports the correct
breakpoint that caused the stop.
2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
PR gdb/16626
* gdb.base/auto-load-script: New file.
* gdb.base/auto-load.c: New file.
* gdb.base/auto-load.exp: New file.
PR gdb/16626
* gdb.base/auto-load.exp: Fix out-of-srctree run.
2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix dw2-icycle.exp -fsanitize=address GDB crash.
* gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
2014-02-24 Doug Evans <dje@google.com>
* lib/gdb.exp (run_on_host): Log error output if program fails.
2014-02-21 Pedro Alves <palves@redhat.com>
* gdb.threads/step-after-sr-lock.c: Rename to ...
* gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
* gdb.threads/step-after-sr-lock.exp: Rename to ...
* gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
... this.
2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR tdep/16397
* gdb.arch/amd64-stap-special-operands.exp: New file.
* gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
* gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
* gdb.arch/amd64-stap-triplet.S: Likewise.
* gdb.arch/amd64-stap-triplet.c: Likewise.
2014-02-20 Joel Brobecker <brobecker@adacore.com>
* gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
in .section pseudo-op.
2014-02-20 lin zuojian <manjian2006@gmail.com>
Joel Brobecker <brobecker@adacore.com>
Doug Evans <xdje42@gmail.com>
PR symtab/16581
* gdb.dwarf2/dw2-icycle.S: New file.
* gdb.dwarf2/dw2-icycle.c: New file.
* gdb.dwarf2/dw2-icycle.exp: New file.
2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
* gdb.python/py-value-cc.cc: Improve test case to enable testing
operations on gdb.Value objects.
* gdb.python/py-value-cc.exp: Add new test to test operations on
gdb.Value objects.
2014-02-18 Doug Evans <dje@google.com>
* Makefile.in (TESTS): New variable.
(expanded_tests, expanded_tests_or_none): New variables
(check-single): Pass $(expanded_tests_or_none) to runtest.
(check-parallel): Only run tests in $(TESTS) if non-empty.
(check/no-matching-tests-found): New rule.
* README: Document TESTS makefile variable.
2014-02-18 Doug Evans <dje@google.com>
* Makefile.in (check-parallel): rm -rf outputs temp.
2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "ERROR: no fileid for" in the testsuite.
* lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
2014-02-12 Doug Evans <dje@google.com>
* gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
(MISCELLANEOUS): New variable.
(clean): rm -rf $(MISCELLANEOUS).
* gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
dwp live in the same directory as symlinks, with each symlink pointed
to a differently named file in a different directory.
2014-02-11 Doug Evans <dje@google.com>
* gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
of Tcl file commands.
2014-02-10 Mark Kettenis <kettenis@gnu.org>
* gdb.threads/step-after-sr-lock.exp: Avoid executing
"kill -SIGUSR1 -1".
2014-02-10 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/tick_length_array_enum_idx: New testcase.
2014-02-10 Doug Evans <xdje42@gmail.com>
* configure.ac (AC_OUTPUT): Add gdb.guile.
* configure: Regenerate.
* lib/gdb-guile.exp: New file.
* lib/gdb.exp (get_target_charset): New function.
* gdb.base/help.exp: Update expected output from "apropos apropos".
* gdb.guile/Makefile.in: New file.
* gdb.guile/guile.exp: New file.
* gdb.guile/scm-arch.c: New file.
* gdb.guile/scm-arch.exp: New file.
* gdb.guile/scm-block.c: New file.
* gdb.guile/scm-block.exp: New file.
* gdb.guile/scm-breakpoint.c: New file.
* gdb.guile/scm-breakpoint.exp: New file.
* gdb.guile/scm-disasm.c: New file.
* gdb.guile/scm-disasm.exp: New file.
* gdb.guile/scm-equal.c: New file.
* gdb.guile/scm-equal.exp: New file.
* gdb.guile/scm-error.exp: New file.
* gdb.guile/scm-error.scm: New file.
* gdb.guile/scm-frame-args.c: New file.
* gdb.guile/scm-frame-args.exp: New file.
* gdb.guile/scm-frame-args.scm: New file.
* gdb.guile/scm-frame-inline.c: New file.
* gdb.guile/scm-frame-inline.exp: New file.
* gdb.guile/scm-frame.c: New file.
* gdb.guile/scm-frame.exp: New file.
* gdb.guile/scm-generics.exp: New file.
* gdb.guile/scm-gsmob.exp: New file.
* gdb.guile/scm-iterator.c: New file.
* gdb.guile/scm-iterator.exp: New file.
* gdb.guile/scm-math.c: New file.
* gdb.guile/scm-math.exp: New file.
* gdb.guile/scm-objfile-script-gdb.in: New file.
* gdb.guile/scm-objfile-script.c: New file.
* gdb.guile/scm-objfile-script.exp: New file.
* gdb.guile/scm-objfile.c: New file.
* gdb.guile/scm-objfile.exp: New file.
* gdb.guile/scm-ports.exp: New file.
* gdb.guile/scm-pretty-print.c: New file.
* gdb.guile/scm-pretty-print.exp: New file.
* gdb.guile/scm-pretty-print.scm: New file.
* gdb.guile/scm-section-script.c: New file.
* gdb.guile/scm-section-script.exp: New file.
* gdb.guile/scm-section-script.scm: New file.
* gdb.guile/scm-symbol.c: New file.
* gdb.guile/scm-symbol.exp: New file.
* gdb.guile/scm-symtab-2.c: New file.
* gdb.guile/scm-symtab.c: New file.
* gdb.guile/scm-symtab.exp: New file.
* gdb.guile/scm-type.c: New file.
* gdb.guile/scm-type.exp: New file.
* gdb.guile/scm-value-cc.cc: New file.
* gdb.guile/scm-value-cc.exp: New file.
* gdb.guile/scm-value.c: New file.
* gdb.guile/scm-value.exp: New file.
* gdb.guile/source2.scm: New file.
* gdb.guile/types-module.cc: New file.
* gdb.guile/types-module.exp: New file.
2014-02-10 Yao Qi <yao@codesourcery.com>
PR testsuite/16543
* configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
* configure: Regenerated.
* Makefile.in: New file.
2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
* gdb.python/py-framefilter.exp: Fix typo.
2014-02-08 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
that no =breakpoint-modified is emitted when breakpoints are
modified through MI commands.
2014-02-07 Pedro Alves <pedro@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/step-after-sr-lock.c: New file.
* gdb.threads/step-after-sr-lock.exp: New file.
2014-02-07 Pedro Alves <palves@redhat.com>
* gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
* gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
2014-02-06 Doug Evans <xdje42@gmail.com>
* gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
output.
* gdb.gdb/python-interrupts.exp: New file.
2014-02-05 Yao Qi <yao@codesourcery.com>
* gdb.trace/report.exp (use_collected_data): Test the output
of "info threads" and "info inferiors".
2014-02-05 Yao Qi <yao@codesourcery.com>
Revert this patch:
2013-05-24 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.exp: Test inferior and thread.
2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
on a function.
* gdb.base/step-bt.c: Call hello via function pointer to make
sure its first instruction is executed on powerpc64le-linux.
2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
of the test patterns for use on little-endian systems.
2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
(decimal_vector): Fix for little-endian.
2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.arch/sparc-sysstep.exp: New file.
* gdb.arch/sparc-sysstep.c: Likewise.
* gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
2014-01-23 Tom Tromey <tromey@redhat.com>
* gdb.ada/array_char_idx: New testcase.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16487:
* gdb.python/py-framefilter.exp: Add test using "Error" filter.
* gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
classes.
2014-01-23 Tom Tromey <tromey@redhat.com>
PR python/16491:
* gdb.python/py-framefilter.py (Reverse_Function.function): Read a
string from an inferior frame.
* gdb.python/py-framefilter-mi.exp: Update.
2014-01-22 Doug Evans <dje@google.com>
* gdb.server/server-mon.exp: Add tests for "set debug-format".
2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
* gdb.base/catch-syscall.exp: Activate test on s390*-linux.
2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
* gdb.trace/entry-values.exp: Remove excess space character from
regex patterns. Handle s390 call instruction.
2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
define "*_start" label. Make "name" static.
* gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
${name} by references to ${name}_start.
2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
* gdb.base/info-macros.exp: Remove "debug" from the compile
options.
2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/demangle.exp: New file.
2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
* gdb.dlang/primitive-types.exp: New file.
2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
* configure.ac: Create gdb.dlang/Makefile.
* configure: Regenerate.
* Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
* gdb.dlang/Makefile.in: New file.
* lib/d-support.exp: New file.
* lib/gdb.exp (skip_d_tests): New proc.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/delta.exp: Check reverse stepi.
* gdb.btrace/tailcall.exp: Update. Add stepping tests.
* gdb.btrace/finish.exp: New.
* gdb.btrace/next.exp: New.
* gdb.btrace/nexti.exp: New.
* gdb.btrace/record_goto.c: Add comments.
* gdb.btrace/step.exp: New.
* gdb.btrace/stepi.exp: New.
* gdb.btrace/multi-thread-step.c: New.
* gdb.btrace/multi-thread-step.exp: New.
* gdb.btrace/rn-dl-bind.c: New.
* gdb.btrace/rn-dl-bind.exp: New.
* gdb.btrace/data.c: New.
* gdb.btrace/data.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
* gdb.btrace/exception.exp: Update.
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/record_goto.exp: Update.
* gdb.btrace/tailcall.exp: Update.
* gdb.btrace/unknown_functions.exp: Update.
* gdb.btrace/delta.exp: New.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/record_goto.exp: Add backtrace test.
* gdb.btrace/tailcall.exp: Add backtrace test.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
* gdb.btrace/record_goto.c: New.
* gdb.btrace/record_goto.exp: New.
* gdb.btrace/x86-record_goto.S: New.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/function_call_history.exp: Update tests.
* gdb.btrace/instruction_history.exp: Update tests.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/function_call_history.exp: Fix expected field
order for "record function-call-history".
Add new tests for "record function-call-history /c".
* gdb.btrace/exception.cc: New.
* gdb.btrace/exception.exp: New.
* gdb.btrace/tailcall.exp: New.
* gdb.btrace/x86-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: New.
* gdb.btrace/unknown_functions.c: New.
* gdb.btrace/unknown_functions.exp: New.
* gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/instruction_history.exp: Update.
* gdb.btrace/function_call_history.exp: Update.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/function_call_history.exp: Fix expected function
trace.
* gdb.btrace/instruction_history.exp: Initialize traced.
Remove traced_functions.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/function_call_history.exp: Update
* gdb.btrace/instruction_history.exp: Update.
2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
* gdb.btrace/enable.exp: Update expected text.
2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
* gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
bytes.
2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/float.exp: Handle "aarch64*-*-*" targets.
2014-01-15 Omair Javaid <omair.javaid@linaro.org>
* lib/gdb.exp (supports_process_record): Return true for
arm*-linux*. (supports_reverse): Likewise.
2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
PR python/15464
PR python/16113
* gdb.python/py-type.c: Enhance test case.
* gdb.python/py-value-cc.cc: Likewise
* gdb.python/py-type.exp: Add new tests.
* gdb.python/py-value-cc.exp: Likewise
2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
Pedro Alves <palves@redhat.com>
* gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
Make "name" extern.
* gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
references to ${name}_start by references to ${name}.
2014-01-10 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/pp-rec-component.exp: Remove path from "source" test.
2014-01-10 Joel Brobecker <brobecker@adacore.com>
* gdb.python/py-pp-integral.exp: Remove path from "source" test.
2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.mi/mi-info-os.exp: Connect to the target with
mi_gdb_target_load.
2014-01-08 Pedro Alves <palves@redhat.com>
* gdb.threads/reconnect-signal.c: New file.
* gdb.threads/reconnect-signal.exp: New file.
2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/source-dir.exp: New file.
2014-01-07 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/mi_interface: New testcase.
2014-01-07 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
gdb.ada/pp-rec-component/pck.ads: New files.
2014-01-07 Joel Brobecker <brobecker@adacore.com>
* gdb.python/py-pp-integral.c: New file.
* gdb.python/py-pp-integral.py: New file.
* gdb.python/py-pp-integral.exp: New file.
For older changes see ChangeLog-1993-2013.
;; Local Variables:
;; mode: change-log
;; left-margin: 8
;; fill-column: 74
;; version-control: never
;; End:
Copyright 2014-2015 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted provided the copyright notice and this notice are preserved.
Reference in a new issue View git blame Copy permalink