old-cross-binutils/gdb/serial.h
2001-03-06 08:22:02 +00:00

262 lines
9.8 KiB
C

/* Remote serial support interface definitions for GDB, the GNU Debugger.
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#ifndef SERIAL_H
#define SERIAL_H
/* For most routines, if a failure is indicated, then errno should be
examined. */
/* Terminal state pointer. This is specific to each type of
interface. */
typedef void *serial_ttystate;
struct _serial_t;
typedef struct _serial_t *serial_t;
/* Try to open NAME. Returns a new serial_t on success, NULL on
failure. */
extern serial_t serial_open (const char *name);
#define SERIAL_OPEN(NAME) serial_open(NAME)
/* Open a new serial stream using a file handle. */
extern serial_t serial_fdopen (const int fd);
#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
/* Push out all buffers, close the device and destroy SERIAL_T. */
extern void serial_close (serial_t);
#define SERIAL_CLOSE(SERIAL_T) serial_close ((SERIAL_T))
/* Push out all buffers and destroy SERIAL_T without closing the
device. */
extern void serial_un_fdopen (serial_t scb);
#define SERIAL_UN_FDOPEN(SERIAL_T) serial_un_fdopen ((SERIAL_T))
/* Read one char from the serial device with TIMEOUT seconds to wait
or -1 to wait forever. Use timeout of 0 to effect a poll.
Infinite waits are not permitted. Returns unsigned char if ok, else
one of the following codes. Note that all error return-codes are
guaranteed to be < 0. */
enum serial_rc {
SERIAL_ERROR = -1, /* General error. */
SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read.
Unfortunately, through ui_loop_hook(), this
can also be a QUIT indication. */
SERIAL_EOF = -3 /* General end-of-file or remote target
connection closed, indication. Includes
things like the line dropping dead. */
};
extern int serial_readchar (serial_t scb, int timeout);
#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar ((SERIAL_T), (TIMEOUT))
/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for
success, non-zero for failure. */
extern int serial_write (serial_t scb, const char *str, int len);
#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN)
/* Write a printf style string onto the serial port. */
extern void serial_printf (serial_t desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
/* Allow pending output to drain. */
extern int serial_drain_output (serial_t);
#define SERIAL_DRAIN_OUTPUT(SERIAL_T) serial_drain_output ((SERIAL_T))
/* Flush (discard) pending output. Might also flush input (if this
system can't flush only output). */
extern int serial_flush_output (serial_t);
#define SERIAL_FLUSH_OUTPUT(SERIAL_T) serial_flush_output ((SERIAL_T))
/* Flush pending input. Might also flush output (if this system can't
flush only input). */
extern int serial_flush_input (serial_t);
#define SERIAL_FLUSH_INPUT(SERIAL_T) serial_flush_input ((SERIAL_T))
/* Send a break between 0.25 and 0.5 seconds long. */
extern int serial_send_break (serial_t scb);
#define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
/* Turn the port into raw mode. */
extern void serial_raw (serial_t scb);
#define SERIAL_RAW(SERIAL_T) serial_raw ((SERIAL_T))
/* Return a pointer to a newly malloc'd ttystate containing the state
of the tty. */
extern serial_ttystate serial_get_tty_state (serial_t scb);
#define SERIAL_GET_TTY_STATE(SERIAL_T) serial_get_tty_state ((SERIAL_T))
/* Set the state of the tty to TTYSTATE. The change is immediate.
When changing to or from raw mode, input might be discarded.
Returns 0 for success, negative value for error (in which case
errno contains the error). */
extern int serial_set_tty_state (serial_t scb, serial_ttystate ttystate);
#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) serial_set_tty_state ((SERIAL_T), (TTYSTATE))
/* printf_filtered a user-comprehensible description of ttystate on
the specified STREAM. FIXME: At present this sends output to the
default stream - GDB_STDOUT. */
extern void serial_print_tty_state (serial_t scb, serial_ttystate ttystate, struct ui_file *);
#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE, STREAM) serial_print_tty_state ((SERIAL_T), (TTYSTATE), (STREAM))
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
current state (generally obtained from a recent call to
SERIAL_GET_TTY_STATE), but be careful not to discard any input.
This means that we never switch in or out of raw mode, even if
NEW_TTYSTATE specifies a switch. */
extern int serial_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
serial_noflush_set_tty_state ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE))
/* Set the baudrate to the decimal value supplied. Returns 0 for
success, -1 for failure. */
extern int serial_setbaudrate (serial_t scb, int rate);
#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) serial_setbaudrate ((SERIAL_T), (RATE))
/* Set the number of stop bits to the value specified. Returns 0 for
success, -1 for failure. */
#define SERIAL_1_STOPBITS 1
#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
#define SERIAL_2_STOPBITS 3
extern int serial_setstopbits (serial_t scb, int num);
#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) serial_setstopbits ((SERIAL_T), (NUM))
/* Asynchronous serial interface: */
/* Can the serial device support asynchronous mode? */
extern int serial_can_async_p (serial_t scb);
#define SERIAL_CAN_ASYNC_P(SERIAL_T) serial_can_async_p ((SERIAL_T))
/* Has the serial device been put in asynchronous mode? */
extern int serial_is_async_p (serial_t scb);
#define SERIAL_IS_ASYNC_P(SERIAL_T) serial_is_async_p ((SERIAL_T))
/* For ASYNC enabled devices, register a callback and enable
asynchronous mode. To disable asynchronous mode, register a NULL
callback. */
typedef void (serial_event_ftype) (serial_t scb, void *context);
extern void serial_async (serial_t scb, serial_event_ftype *handler, void *context);
#define SERIAL_ASYNC(SERIAL_T, HANDLER, CONTEXT) serial_async ((SERIAL_T), (HANDLER), (CONTEXT))
/* Provide direct access to the underlying FD (if any) used to
implement the serial device. This interface is clearly
deprecated. Will call internal_error() if the operation isn't
applicable to the current serial device. */
extern int deprecated_serial_fd (serial_t scb);
#define DEPRECATED_SERIAL_FD(SERIAL_T) deprecated_serial_fd ((SERIAL_T))
/* Trace/debug mechanism.
SERIAL_DEBUG() enables/disables internal debugging.
SERIAL_DEBUG_P() indicates the current debug state. */
extern void serial_debug (serial_t scb, int debug_p);
#define SERIAL_DEBUG(SERIAL_T, DEBUG_P) serial_debug ((SERIAL_T), (DEBUG_P))
extern int serial_debug_p (serial_t scb);
#define SERIAL_DEBUG_P(SERIAL_T) serial_debug_p ((SERIAL_T))
/* Details of an instance of a serial object */
struct _serial_t
{
int fd; /* File descriptor */
struct serial_ops *ops; /* Function vector */
void *state; /* Local context info for open FD */
serial_ttystate ttystate; /* Not used (yet) */
int bufcnt; /* Amount of data remaining in receive
buffer. -ve for sticky errors. */
unsigned char *bufp; /* Current byte */
unsigned char buf[BUFSIZ]; /* Da buffer itself */
int current_timeout; /* (ser-unix.c termio{,s} only), last
value of VTIME */
int timeout_remaining; /* (ser-unix.c termio{,s} only), we
still need to wait for this many
more seconds. */
char *name; /* The name of the device or host */
struct _serial_t *next; /* Pointer to the next serial_t */
int refcnt; /* Number of pointers to this block */
int debug_p; /* Trace this serial devices operation. */
int async_state; /* Async internal state. */
void *async_context; /* Async event thread's context */
serial_event_ftype *async_handler;/* Async event handler */
};
struct serial_ops
{
char *name;
struct serial_ops *next;
int (*open) (serial_t, const char *name);
void (*close) (serial_t);
int (*readchar) (serial_t, int timeout);
int (*write) (serial_t, const char *str, int len);
/* Discard pending output */
int (*flush_output) (serial_t);
/* Discard pending input */
int (*flush_input) (serial_t);
int (*send_break) (serial_t);
void (*go_raw) (serial_t);
serial_ttystate (*get_tty_state) (serial_t);
int (*set_tty_state) (serial_t, serial_ttystate);
void (*print_tty_state) (serial_t, serial_ttystate, struct ui_file *);
int (*noflush_set_tty_state) (serial_t, serial_ttystate, serial_ttystate);
int (*setbaudrate) (serial_t, int rate);
int (*setstopbits) (serial_t, int num);
/* Wait for output to drain */
int (*drain_output) (serial_t);
/* Change the serial device into/out of asynchronous mode, call
the specified function when ever there is something
interesting. */
void (*async) (serial_t scb, int async_p);
};
/* Add a new serial interface to the interface list */
extern void serial_add_interface (struct serial_ops * optable);
/* File in which to record the remote debugging session */
extern void serial_log_command (const char *);
#endif /* SERIAL_H */