old-cross-binutils/opcodes/Makefile.in
Ian Lance Taylor e0bf1022dd Support for building as a shared library, based on patches from
Alan Modra <alan@spri.levels.unisa.edu.au>:
	* configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
	New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
	SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
	* configure: Rebuild.
	* Makefile.in (ALLLIBS): New variable.
	(PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
	(COMMON_SHLIB, SHLINK): New variables.
	(.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
	(STAGESTUFF): Remove variable.
	(all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
	(stamp-piclist, piclist): New targets.
	($(SHLIB), $(SHLINK)): New targets.
	($(OFILES)): Depend upon stamp-picdir.
	(disassemble.o): Build twice if PICFLAG is set.
	(MOSTLYCLEAN): Add pic/*.o.
	(clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
	(distclean): Remove pic and stamp-picdir.
	(install): Install shared libraries.
	(stamp-picdir): New target.
1996-02-05 21:17:52 +00:00

271 lines
7.7 KiB
Makefile

# Makefile template for Configure for the opcodes library.
# Copyright (C) 1990, 1991, 1992, 1995 Free Software Foundation, Inc.
# Written by Cygnus Support.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
VPATH = @srcdir@
srcdir = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
datadir = $(prefix)/lib
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
oldincludedir =
docdir = $(srcdir)/doc
SHELL = /bin/sh
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
AR = @AR@
AR_FLAGS = rc
CC = @CC@
CFLAGS = @CFLAGS@
MAKEINFO = makeinfo
RANLIB = @RANLIB@
ALLLIBS = @ALLLIBS@
PICFLAG = @PICFLAG@
SHLIB = @SHLIB@
SHLIB_CC = @SHLIB_CC@
SHLIB_CFLAGS = @SHLIB_CFLAGS@
COMMON_SHLIB = @COMMON_SHLIB@
SHLINK = @SHLINK@
INCDIR = $(srcdir)/../include
BFDDIR = $(srcdir)/../bfd
CSEARCH = -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR)
DEP = mkdep
TARGETLIB = libopcodes.a
# To circumvent a Sun make VPATH bug, each file listed here
# should also have a foo.o: foo.c line further along in this file.
ALL_MACHINES = a29k-dis.o alpha-dis.o h8300-dis.o h8500-dis.o \
$(start-sanitize-arc) \
arc-dis.o arc-opc.o \
$(end-sanitize-arc) \
hppa-dis.o i386-dis.o i960-dis.o m68k-dis.o m68k-opc.o \
m88k-dis.o mips-dis.o mips-opc.o sh-dis.o sparc-dis.o \
sparc-opc.o z8k-dis.o ns32k-dis.o ppc-dis.o ppc-opc.o \
arm-dis.o w65-dis.o
OFILES = @BFD_MACHINES@ dis-buf.o disassemble.o
FLAGS_TO_PASS = \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)"
ALL_CFLAGS = $(CSEARCH) @HDEFINES@ $(CFLAGS)
.c.o:
if [ -n "$(PICFLAG)" ]; then \
$(CC) -c $(PICFLAG) $(ALL_CFLAGS) $< -o pic/$@; \
else true; fi
$(CC) -c $(ALL_CFLAGS) $<
# C source files that correspond to .o's.
CFILES = i386-dis.c z8k-dis.c m68k-dis.c mips-dis.c ns32k-dis.c ppc-dis.c
all: $(ALLLIBS)
.NOEXPORT:
installcheck check:
info:
clean-info:
install-info:
dvi:
# HDEPFILES comes from the host config; TDEPFILES from the target config.
$(TARGETLIB): $(OFILES)
rm -f $(TARGETLIB)
$(AR) $(AR_FLAGS) $(TARGETLIB) $(OFILES)
$(RANLIB) $(TARGETLIB)
stamp-piclist: Makefile
rm -f tpiclist
if [ -n "$(PICFLAG)" ]; then \
echo $(OFILES) | sed -e 's,\([^ ][^ ]*\),pic/\1,g' > tpiclist; \
else \
echo $(OFILES) > tpiclist; \
fi
$(srcdir)/../move-if-change tpiclist piclist
touch stamp-piclist
piclist: stamp-piclist ; @true
$(SHLIB): stamp-picdir $(OFILES) piclist
rm -f $(SHLIB)
if [ "$(COMMON_SHLIB)" != "yes" ]; then \
$(SHLIB_CC) $(SHLIB_CFLAGS) -o $(SHLIB) `cat piclist`; \
else \
lobjs=`cat ../libiberty/required-list ../libiberty/needed-list`; \
if [ -n "$(PICFLAG)" ]; then \
lobjs=`echo $$lobjs | sed -e 's,\([^ ][^ ]*\),pic/\1,g'`; \
fi; \
lobjs=`echo $$lobjs | sed -e 's,\([^ ][^ ]*\),../libiberty/\1,g'`; \
$(SHLIB_CC) $(SHLIB_CFLAGS) -o $(SHLIB) \
`sed -e 's,\([^ ][^ ]*\),../bfd/\1,g' ../bfd/piclist` \
`cat piclist` $$lobjs; \
fi
$(SHLINK): $(SHLIB)
rm -f $(SHLINK)
ln -sf `echo $(SHLIB) | sed -e 's,^\.\./bfd/,,'` $(SHLINK)
$(OFILES): stamp-picdir
disassemble.o: disassemble.c $(INCDIR)/dis-asm.h
if [ -n "$(PICFLAG)" ]; then \
$(CC) -c @archdefs@ $(PICFLAG) $(ALL_CFLAGS) $(srcdir)/disassemble.c -o pic/disassemble.o; \
else true; fi
$(CC) -c @archdefs@ $(ALL_CFLAGS) $(srcdir)/disassemble.c
a29k-dis.o: a29k-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/a29k.h
dis-buf.o: dis-buf.c $(INCDIR)/dis-asm.h
h8500-dis.o: h8500-dis.c h8500-opc.h $(INCDIR)/dis-asm.h
h8300-dis.o: h8300-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/h8300.h
i386-dis.o: i386-dis.c $(INCDIR)/dis-asm.h
i960-dis.o: i960-dis.c $(INCDIR)/dis-asm.h
w65-dis.o: w65-dis.c
m68k-dis.o: m68k-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/floatformat.h \
$(INCDIR)/opcode/m68k.h
m68k-opc.o: m68k-opc.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/m68k.h
mips-dis.o: mips-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/mips.h
mips-opc.o: mips-opc.c $(INCDIR)/opcode/mips.h
ppc-dis.o: ppc-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/ppc.h
ppc-opc.o: ppc-opc.c $(INCDIR)/opcode/ppc.h
sparc-dis.o: sparc-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/sparc.h
sparc-opc.o: sparc-opc.c $(INCDIR)/opcode/sparc.h
z8k-dis.o: z8k-dis.c z8k-opc.h $(INCDIR)/dis-asm.h
ns32k-dis.o: ns32k-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/ns32k.h
sh-dis.o: sh-dis.c sh-opc.h $(INCDIR)/dis-asm.h
alpha-dis.o: alpha-dis.c alpha-opc.h $(INCDIR)/dis-asm.h
hppa-dis.o: hppa-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/hppa.h
m88k-dis.o: m88k-dis.c $(INCDIR)/dis-asm.h $(INCDIR)/opcode/m88k.h
arm-dis.o: arm-dis.c arm-opc.h $(INCDIR)/dis-asm.h
tags etags: TAGS
TAGS: force
etags $(INCDIR)/*.h $(srcdir)/*.h $(srcdir)/*.c
MOSTLYCLEAN = *.o core *.E *.p *.ip config.log pic/*.o
mostlyclean:
rm -rf $(MOSTLYCLEAN)
clean:
rm -f *.a $(MOSTLYCLEAN) $(SHLIB) $(SHLINK) piclist stamp-piclist
distclean: clean
rm -rf Makefile config.status TAGS config.cache config.h stamp-h \
pic stamp-picdir
clobber realclean maintainer-clean: distclean
# Mark everything as depending on config.status, since the timestamp on
# sysdep.h might actually move backwards if we reconfig and relink it
# to a different hosts/h-xxx.h file. This will force a recompile anyway.
RECONFIG = config.status
# This target should be invoked before building a new release.
# 'VERSION' file must be present and contain a string of the form "x.y"
#
roll:
@V=`cat VERSION` ; \
MAJ=`sed 's/\..*//' VERSION` ; \
MIN=`sed 's/.*\.//' VERSION` ; \
V=$$MAJ.`expr $$MIN + 1` ; \
rm -f VERSION ; \
echo $$V >VERSION ; \
echo Version $$V
# Dummy target to force execution of dependent targets.
#
force:
install: $(ALLLIBS)
for f in $(ALLLIBS); do \
bf=`echo $$f | sed -e 's,^\.\./bfd/,,'`; \
rm -f $(libdir)/$$bf; \
if [ "$$f" = "$(SHLINK)" ]; then \
ln -sf `echo $(SHLIB) | sed -e 's,^\.\./bfd/,,'` $(libdir)/$$bf; \
elif [ "$$f" = "$(SHLIB)" ]; then \
$(INSTALL_PROGRAM) $$f $(libdir)/$$bf; \
else \
$(INSTALL_DATA) $$f $(libdir)/$$bf; \
$(RANLIB) $(libdir)/$$bf; \
chmod a-x $(libdir)/$$bf; \
fi; \
done
Makefile: Makefile.in config.status
CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
config.h: stamp-h ; @true
stamp-h: config.in config.status
CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
config.status : configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/config.bfd
$(SHELL) config.status --recheck
dep: $(CFILES)
mkdep $(CFLAGS) $?
stamp-picdir:
if [ -n "$(PICFLAG)" ] && [ ! -d pic ]; then \
mkdir pic; \
else true; fi
touch stamp-picdir
# What appears below is generated by a hacked mkdep using gcc -MM.
# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY