old-cross-binutils/gdb/testsuite/gdb.base/charset.exp
Jim Blandy f21565d2ff * gdb.base/call-ar-st.exp: Call 'untested' and return -1 instead of
calling gdb_suppress_entire_file.
* gdb.base/charset.exp: Same.
* gdb.base/call-rt-st.exp: Same.
2005-05-13 17:36:43 +00:00

550 lines
20 KiB
Text

# This testcase is part of GDB, the GNU debugger.
# Copyright 2001, 2004 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@gnu.org
# Test GDB's character set support.
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
set testfile "charset"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
return -1
}
# Start with a fresh gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
# Parse the output from a `show charset' command. Return the host
# and target charset as a two-element list.
proc parse_show_charset_output {testname} {
global gdb_prompt
gdb_expect {
-re "The current host and target character set is `(.*)'\\.\[\r\n\]+$gdb_prompt $" {
set host_charset $expect_out(1,string)
set target_charset $expect_out(1,string)
set retlist [list $host_charset $target_charset]
pass $testname
}
-re "The current host character set is `(.*)'\\.\[\r\n\]+The current target character set is `(.*)'\\.\[\r\n\]+$gdb_prompt $" {
set host_charset $expect_out(1,string)
set target_charset $expect_out(2,string)
set retlist [list $host_charset $target_charset]
pass $testname
}
-re "The host character set is \"(.*)\"\\.\[\r\n\]+$gdb_prompt $" {
set host_charset $expect_out(1,string)
set retlist [list $host_charset]
pass $testname
}
-re "The target character set is \"(.*)\"\\.\[\r\n\]+$gdb_prompt $" {
set target_charset $expect_out(1,string)
set retlist [list $target_charset]
pass $testname
}
-re ".*$gdb_prompt $" {
fail $testname
}
timeout {
fail "$testname (timeout)"
}
}
return $retlist
}
# Try the various `show charset' commands. These are all aliases of each
# other; `show target-charset' and `show host-charset' actually print
# both the host and target charsets.
send_gdb "show charset\n"
set show_charset [parse_show_charset_output "show charset"]
send_gdb "show target-charset\n"
set show_target_charset [parse_show_charset_output "show target-charset"]
if {[lsearch $show_charset $show_target_charset] >= 0} {
pass "check `show target-charset' against `show charset'"
} else {
fail "check `show target-charset' against `show charset'"
}
send_gdb "show host-charset\n"
set show_host_charset [parse_show_charset_output "show host-charset"]
if {[lsearch $show_charset $show_host_charset] >= 0} {
pass "check `show host-charset' against `show charset'"
} else {
fail "check `show host-charset' against `show charset'"
}
# Get the list of supported (host) charsets as possible completions.
send_gdb "set charset \t\t"
# Check that we can at least use ASCII as a host character set.
sleep 1
gdb_expect {
-re "^set charset .*\r\nASCII.*\r\n$gdb_prompt set charset " {
# We got the output that we wanted, including ASCII as possible
# charset. Send a newline to get us back to the prompt. This will
# also generate an error message. Let's not check here that the error
# message makes sense, we do that below, as a separate testcase.
send_gdb "\n"
gdb_expect {
-re ".*Requires an argument.*$gdb_prompt $" {
pass "get valid character sets"
}
-re ".*$gdb_prompt $" {
send_gdb "\n"
gdb_expect {
-re ".*$gdb_prompt $" {
fail "get valid character sets"
}
}
}
timeout {
fail "(timeout) get valid character sets"
}
}
}
-re ".*$gdb_prompt $" {
# We got some output that ended with a regular prompt
fail "get valid character sets"
}
-re ".*$gdb_prompt set charset.*$" {
# We got some other output, send a cntrl-c to gdb to get us back
# to the prompt.
send_gdb "\003"
fail "get valid character sets"
}
timeout {
fail "get valid character sets (timeout)"
}
}
# Try a malformed `set charset'.
gdb_test "set charset" \
"Requires an argument. Valid arguments are.*" \
"try malformed `set charset'"
# Try using `set host-charset' on an invalid character set.
gdb_test "set host-charset my_grandma_bonnie" \
"Undefined item: \"my_grandma_bonnie\"." \
"try `set host-charset' with invalid charset"
# Try using `set target-charset' on an invalid character set.
gdb_test "set target-charset my_grandma_bonnie" \
"Undefined item: \"my_grandma_bonnie\"." \
"try `set target-charset' with invalid charset"
# A Tcl array mapping the names of all the character sets we've seen
# to "1" if the character set can be used as a host character set, or
# "0" otherwise. We can use `array names charsets' just to get a list
# of all character sets.
array set charsets {}
proc all_charset_names {} {
global charsets
return [array names charsets]
}
proc valid_host_charset {charset} {
global charsets
return $charsets($charset)
}
send_gdb "set host-charset\n"
gdb_expect {
-re "Requires an argument. Valid arguments are (\[^ \t\n\r,.\]*)" {
#set host_charset_list $expect_out(1,string)
set charsets($expect_out(1,string)) 1
exp_continue
#pass "capture valid host charsets"
}
-re ", (\[^ \t\n\r,.\]*)" {
#set host_charset_list $expect_out(1,string)
set charsets($expect_out(1,string)) 1
exp_continue
#pass "capture valid host charsets"
}
-re "\\.\r\n$gdb_prompt $" {
#set host_charset_list $expect_out(1,string)
pass "capture valid host charsets"
}
-re ".*$gdb_prompt $" {
fail "capture valid host charsets"
}
timeout {
fail "(timeout) capture valid host charsets"
}
}
send_gdb "set target-charset\n"
gdb_expect {
-re "Requires an argument. Valid arguments are (\[^ \t\n\r,.\]*)" {
set target_charset $expect_out(1,string)
if {! [info exists charsets($target_charset)]} {
set charsets($target_charset) 0
}
exp_continue
}
-re ", (\[^ \t\n\r,.\]*)" {
set target_charset $expect_out(1,string)
if {! [info exists charsets($target_charset)]} {
set charsets($target_charset) 0
}
exp_continue
}
-re "\\.\r\n$gdb_prompt $" {
pass "capture valid target charsets"
}
-re ".*$gdb_prompt $" {
fail "capture valid target charsets"
}
timeout {
fail "(timeout) capture valid target charsets"
}
}
# Make sure that GDB supports every host/target charset combination.
foreach host_charset [all_charset_names] {
if {[valid_host_charset $host_charset]} {
set testname "try `set host-charset $host_charset'"
send_gdb "set host-charset $host_charset\n"
gdb_expect {
-re "GDB doesn't know of any character set named.*\[\r\n]+${gdb_prompt} $" {
# How did it get into `charsets' then?
fail "$testname (didn't recognize name)"
}
-re "GDB can't use `.*' as its host character set\\.\[\r\n]+${gdb_prompt} $" {
# Well, then why does its `charsets' entry say it can?
fail $testname
}
-re "${gdb_prompt} $" {
pass $testname
}
timeout {
fail "$testname (timeout)"
}
}
# Check that the command actually had its intended effect:
# $host_charset should now be the host character set.
send_gdb "show charset\n"
set result [parse_show_charset_output "parse `show charset' after `set host-charset $host_charset'"]
if {! [string compare [lindex $result 0] $host_charset]} {
pass "check effect of `set host-charset $host_charset'"
} else {
fail "check effect of `set host-charset $host_charset'"
}
# Now try setting every possible target character set,
# given that host charset.
foreach target_charset [all_charset_names] {
set testname "try `set target-charset $target_charset'"
send_gdb "set target-charset $target_charset\n"
gdb_expect {
-re "GDB doesn't know of any character set named.*\[\r\n]+${gdb_prompt} $" {
fail "$testname (didn't recognize name)"
}
-re "GDB can't convert from the .* character set to .*\\.\[\r\n\]+${gdb_prompt} $" {
# This is a serious problem. GDB should be able to convert
# between any arbitrary pair of character sets.
fail "$testname (can't convert)"
}
-re "${gdb_prompt} $" {
pass $testname
}
timeout {
fail "$testname (timeout)"
}
}
# Check that the command actually had its intended effect:
# $target_charset should now be the target charset.
send_gdb "show charset\n"
set result [parse_show_charset_output "parse `show charset' after `set target-charset $target_charset'"]
if {! [string compare $result [list $host_charset $target_charset]]} {
pass "check effect of `set target-charset $target_charset'"
} else {
fail "check effect of `set target-charset $target_charset'"
}
# Test handling of characters in the host charset which
# can't be translated into the target charset. \xA2 is
# `cent' in ISO-8859-1, which has no equivalent in ASCII.
#
# On some systems, the pseudo-tty through which we
# communicate with GDB insists on stripping the high bit
# from input characters, meaning that `cent' turns into
# `"'. Since ISO-8859-1 and ASCII are identical in the
# lower 128 characters, it's tough to see how we can test
# this behavior on such systems, so we just xfail it.
#
# Note: the \x16 (Control-V) is an escape to allow \xA2 to
# get past readline.
if {! [string compare $host_charset iso-8859-1] && ! [string compare $target_charset ascii]} {
set testname "untranslatable character in character literal"
send_gdb "print '\x16\xA2'\n"
gdb_expect {
-re "There is no character corresponding to .* in the target character set .*\\.\[\r\n\]+$gdb_prompt $" {
pass $testname
}
-re " = 34 '\"'\[\r\n\]+$gdb_prompt $" {
xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
}
-re "$gdb_prompt $" {
fail $testname
}
timeout {
fail "$testname (timeout)"
}
}
set testname "untranslatable character in string literal"
# If the PTTY zeros bit seven, then this turns into
# print """
# which gets us a syntax error. We don't care.
send_gdb "print \"\x16\xA2\"\n"
gdb_expect {
-re "There is no character corresponding to .* in the target character set .*\\.\[\r\n\]+$gdb_prompt $" {
pass $testname
}
-re "Unterminated string in expression.\[\r\n\]+$gdb_prompt $" {
xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
}
-re "$gdb_prompt $" {
fail $testname
}
timeout {
fail "$testname (timeout)"
}
}
set testname "untranslatable characters in backslash escape"
send_gdb "print '\\\x16\xA2'\n"
gdb_expect {
-re "The escape sequence .* is equivalent to plain .*, which has no equivalent\[\r\n\]+in the .* character set\\.\[\r\n\]+$gdb_prompt $" {
pass $testname
}
-re " = 34 '\"'\[\r\n\]+$gdb_prompt $" {
xfail "$testname (DejaGNU's pseudo-tty strips eighth bit)"
}
-re "$gdb_prompt $" {
fail $testname
}
timeout {
fail "$testname (timeout)"
}
}
}
}
}
}
# Set the host character set to plain ASCII, and try actually printing
# some strings in various target character sets. We need to run the
# test program to the point at which the strings have been
# initialized.
gdb_test "break [gdb_get_line_number "all strings initialized"]" \
".*Breakpoint.* at .*" \
"set breakpoint after all strings have been initialized"
gdb_run_cmd
gdb_expect {
-re "Breakpoint.*all strings initialized.*$gdb_prompt $" {
pass "run until all strings have been initialized"
}
-re "$gdb_prompt $" {
fail "run until all strings have been initialized"
}
timeout {
fail "run until all strings have been initialized (timeout)"
}
}
gdb_test "set host-charset ASCII" ""
foreach target_charset [all_charset_names] {
send_gdb "set target-charset $target_charset\n"
gdb_expect {
-re "$gdb_prompt $" {
pass "set target-charset $target_charset"
}
timeout {
fail "set target-charset $target_charset (timeout)"
}
}
# Try printing the null character. There seems to be a bug in
# gdb_test that requires us to use gdb_expect here.
send_gdb "print '\\0'\n"
gdb_expect {
-re "\\\$${decimal} = 0 '\\\\0'\[\r\n\]+$gdb_prompt $" {
pass "print the null character in ${target_charset}"
}
-re "$gdb_prompt $" {
fail "print the null character in ${target_charset}"
}
timeout {
fail "print the null character in ${target_charset} (timeout)"
}
}
# Compute the name of the variable in the test program that holds
# a string in $target_charset. The variable's name is the
# character set's name, in lower-case, with all non-identifier
# characters replaced with '_', with "_string" stuck on the end.
set var_name [string tolower "${target_charset}_string"]
regsub -all -- "\[^a-z0-9_\]" $var_name "_" var_name
# Compute a regexp matching the results we expect. This is static,
# but it's easier than writing it out.
regsub -all "." "abfnrtv" "(\\\\&|x)" escapes
set uppercase "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
set lowercase "abcdefghijklmnopqrstuvwxyz"
set digits "0123456789"
set octal_escape "\\\\\[0-9\]\[0-9\]\[0-9\]"
send_gdb "print $var_name\n"
# ${escapes}${uppercase}${lowercase}${digits}${octal}${octal}
gdb_expect {
-re ".* = \"(\\\\a|x)(\\\\b|x)(\\\\f|x)(\\\\n|x)(\\\\r|x)(\\\\t|x)(\\\\v|x)${uppercase}${lowercase}${digits}(\\\\\[0-9\]\[0-9\]\[0-9\]|x)(\\\\\[0-9\]\[0-9\]\[0-9\]|x).*\"\[\r\n\]+$gdb_prompt $" {
pass "print string in $target_charset"
}
-re "$gdb_prompt $" {
fail "print string in $target_charset"
}
timeout {
fail "print string in $target_charset (timeout)"
}
}
# Try entering a character literal, and see if it comes back unchanged.
gdb_test "print 'A'" \
" = \[0-9-\]+ 'A'" \
"parse character literal in ${target_charset}"
# Check that the character literal was encoded correctly.
gdb_test "print 'A' == $var_name\[7\]" \
" = 1" \
"check value of parsed character literal in ${target_charset}"
# Try entering a string literal, and see if it comes back unchanged.
gdb_test "print \"abcdefABCDEF012345\"" \
" = \"abcdefABCDEF012345\"" \
"parse string literal in ${target_charset}"
# Check that the string literal was encoded correctly.
gdb_test "print \"q\"\[0\] == $var_name\[49\]" \
" = 1" \
"check value of parsed string literal in ${target_charset}"
# Test handling of characters in the target charset which
# can't be translated into the host charset.
if {! [string compare $target_charset iso-8859-1]} {
gdb_test "print iso_8859_1_string\[69\]" \
" = \[0-9-\]+ '\\\\242'" \
"print character with no equivalent in host character set"
gdb_test "print iso_8859_1_string + 70" \
" = ${hex} \"\\\\242.*\"" \
"print string with no equivalent in host character set"
}
# Make sure that we don't apply the ISO-8859-1 `print_literally'
# function to ASCII.
if {! [string compare $target_charset ascii]} {
gdb_test "print iso_8859_1_string\[69\]" \
" = \[0-9-\]+ '\\\\242'" \
"print ASCII unprintable character"
gdb_test "print iso_8859_1_string + 70" \
" = ${hex} \"\\\\242.*\"" \
"print ASCII unprintable string"
}
# Try printing characters with backslash escape equivalents.
set escapees {a b f n r t v}
for {set i 0} {$i < [llength $escapees]} {incr i} {
set escape [lindex $escapees $i]
send_gdb "print $var_name\[$i\]\n"
set have_escape 1
gdb_expect {
-re "= \[0-9-\]+ '\\\\${escape}'\[\r\n\]+$gdb_prompt $" {
pass "try printing '\\${escape}' in ${target_charset}"
}
-re "= \[0-9-\]+ 'x'\[\r\n\]+$gdb_prompt $" {
xfail "try printing '\\${escape}' in ${target_charset} (no such escape)"
set have_escape 0
}
-re "$gdb_prompt $" {
fail "try printing '\\${escape}' in ${target_charset}"
}
timeout {
fail "try printing '\\${escape}' in ${target_charset} (timeout)"
}
}
if {$have_escape} {
# Try parsing a backslash escape in a character literal.
gdb_test "print '\\${escape}' == $var_name\[$i\]" \
" = 1" \
"check value of '\\${escape}' in ${target_charset}"
# Try parsing a backslash escape in a string literal.
gdb_test "print \"\\${escape}\"\[0\] == $var_name\[$i\]" \
" = 1" \
"check value of \"\\${escape}\" in ${target_charset}"
}
}
# Try printing a character escape that doesn't exist. We should
# get the unescaped character, in the target character set.
gdb_test "print '\\q'" " = \[0-9-\]+ 'q'" \
"print escape that doesn't exist in $target_charset"
gdb_test "print '\\q' == $var_name\[49\]" " = 1" \
"check value of escape that doesn't exist in $target_charset"
}
gdb_exit