old-cross-binutils/gdb/sh3-rom.c
Stan Shebs 00dd4fd9ad * infcmd.c (do_registers_info): Ignore anonymous registers.
* sh-tdep.c (set processor): New command to set specific
	processor type.
	(sh_reg_names, sh3_reg_names): Arrays of register names for
	SH and SH3 processors.
	(sh_set_processor_type): New function.
	* sh3-rom.c (sh3_open): Call it.
	(sh3_regname): Add names of all the bank registers.
	(sh3_supply_register): Clean up formatting.
	* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
 	bank registers.
	(REGISTER_NAMES): Add names of bank registers.
	(FP15_REGNUM): Define.
	(REGISTER_VIRTUAL_TYPE): Use it.
	* monitor.c: Clean up some comments.
1996-03-08 02:04:19 +00:00

305 lines
7.8 KiB
C

/* Remote target glue for the Hitachi SH-3 ROM monitor.
Copyright 1995, 1996 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdbcore.h"
#include "target.h"
#include "monitor.h"
#include "serial.h"
#include "srec.h"
static serial_t parallel;
static int parallel_in_use;
static void sh3_open PARAMS ((char *args, int from_tty));
static void
sh3_supply_register (regname, regnamelen, val, vallen)
char *regname;
int regnamelen;
char *val;
int vallen;
{
int numregs;
int regno;
numregs = 1;
regno = -1;
if (regnamelen == 2)
{
switch (regname[0])
{
case 'S':
if (regname[1] == 'R')
regno = SR_REGNUM;
break;
case 'P':
if (regname[1] == 'C')
regno = PC_REGNUM;
else if (regname[1] == 'R')
regno = PR_REGNUM;
break;
}
}
else if (regnamelen == 3)
{
switch (regname[0])
{
case 'G':
case 'V':
if (regname[1] == 'B' && regname[2] == 'R')
if (regname[0] == 'G')
regno = VBR_REGNUM;
else
regno = GBR_REGNUM;
break;
#if 0
case 'S':
if (regname[1] == 'S' && regname[2] == 'R')
regno = SSR_REGNUM;
else if (regname[1] == 'P' && regname[2] == 'C')
regno = SPC_REGNUM;
break;
#endif
}
}
else if (regnamelen == 4)
{
switch (regname[0])
{
case 'M':
if (regname[1] == 'A' && regname[2] == 'C')
if (regname[3] == 'H')
regno = MACH_REGNUM;
else if (regname[3] == 'L')
regno = MACL_REGNUM;
break;
case 'R':
if (regname[1] == '0' && regname[2] == '-' && regname[3] == '7')
{
regno = R0_REGNUM;
numregs = 8;
}
}
}
else if (regnamelen == 5)
{
if (regname[1] == '8' && regname[2] == '-' && regname[3] == '1'
&& regname[4] =='5')
{
regno = R0_REGNUM + 8;
numregs = 8;
}
}
if (regno >= 0)
while (numregs-- > 0)
val = monitor_supply_register (regno++, val);
}
static void
sh3_load (desc, file, hashmark)
serial_t desc;
char *file;
int hashmark;
{
if (parallel_in_use)
{
monitor_printf("pl;s\r");
load_srec (parallel, file, 80, SREC_ALL, hashmark);
monitor_expect_prompt (NULL, 0);
}
else
{
monitor_printf ("il;s:x\r");
monitor_expect ("\005", NULL, 0); /* Look for ENQ */
SERIAL_WRITE (desc, "\006", 1); /* Send ACK */
monitor_expect ("LO x\r", NULL, 0); /* Look for filename */
load_srec (desc, file, 80, SREC_ALL, hashmark);
monitor_expect ("\005", NULL, 0); /* Look for ENQ */
SERIAL_WRITE (desc, "\006", 1); /* Send ACK */
monitor_expect_prompt (NULL, 0);
}
}
/* This array of registers need to match the indexes used by GDB.
This exists because the various ROM monitors use different strings
than does GDB, and don't necessarily support all the registers
either. So, typing "info reg sp" becomes a "r30". */
static char *sh3_regnames[NUM_REGS] = {
"R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7",
"R8", "R9", "R10", "R11","R12", "R13", "R14", "R15",
"PC", "PR", "GBR", "VBR","MACH","MACL", "SR",
NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"R0_BANK0", "R1_BANK0", "R2_BANK0", "R3_BANK0",
"R4_BANK0", "R5_BANK0", "R6_BANK0", "R7_BANK0",
"R0_BANK1", "R1_BANK1", "R2_BANK1", "R3_BANK1",
"R4_BANK1", "R5_BANK1", "R6_BANK1", "R7_BANK1"
};
/* Define the monitor command strings. Since these are passed directly
through to a printf style function, we may include formatting
strings. We also need a CR or LF on the end. */
static struct target_ops sh3_ops;
static char *sh3_inits[] = {"\003", NULL}; /* Exits sub-command mode & download cmds */
static struct monitor_ops sh3_cmds =
{
MO_CLR_BREAK_USES_ADDR
| MO_GETMEM_READ_SINGLE, /* flags */
sh3_inits, /* monitor init string */
"g\r", /* continue command */
"s\r", /* single step */
"\003", /* Interrupt program */
"b %x\r", /* set a breakpoint */
"b -%x\r", /* clear a breakpoint */
"b -\r", /* clear all breakpoints */
"f %x @%x %x\r", /* fill (start len val) */
{
"m %x %x\r", /* setmem.cmdb (addr, value) */
"m %x %x;w\r", /* setmem.cmdw (addr, value) */
"m %x %x;l\r", /* setmem.cmdl (addr, value) */
NULL, /* setmem.cmdll (addr, value) */
NULL, /* setreg.resp_delim */
NULL, /* setreg.term */
NULL, /* setreg.term_cmd */
},
{
"m %x\r", /* getmem.cmdb (addr, len) */
"m %x;w\r", /* getmem.cmdw (addr, len) */
"m %x;l\r", /* getmem.cmdl (addr, len) */
NULL, /* getmem.cmdll (addr, len) */
"^ [0-9A-F]+ ", /* getmem.resp_delim */
"? ", /* getmem.term */
".\r", /* getmem.term_cmd */
},
{
".%s %x\r", /* setreg.cmd (name, value) */
NULL, /* setreg.resp_delim */
NULL, /* setreg.term */
NULL /* setreg.term_cmd */
},
{
".%s\r", /* getreg.cmd (name) */
"=", /* getreg.resp_delim */
"? ", /* getreg.term */
".\r" /* getreg.term_cmd */
},
"r\r", /* dump_registers */
/* register_pattern */
"\\(\\w+\\)=\\([0-9a-fA-F]+\\( +[0-9a-fA-F]+\\b\\)*\\)",
sh3_supply_register, /* supply_register */
sh3_load, /* load_routine */
NULL, /* download command */
NULL, /* Load response */
"\n:", /* monitor command prompt */
"\r", /* end-of-line terminator */
".\r", /* optional command terminator */
&sh3_ops, /* target operations */
SERIAL_1_STOPBITS, /* number of stop bits */
sh3_regnames, /* registers names */
MONITOR_OPS_MAGIC /* magic */
};
static void
sh3_open (args, from_tty)
char *args;
int from_tty;
{
char *serial_port_name = args;
char *parallel_port_name = 0;
if (args)
{
char *cursor = serial_port_name = strsave (args);
while (*cursor && *cursor != ' ')
cursor++;
if (*cursor)
*cursor++ = 0;
while (*cursor == ' ')
cursor++;
if (*cursor)
parallel_port_name = cursor;
}
monitor_open (serial_port_name, &sh3_cmds, from_tty);
if (parallel_port_name)
{
parallel = SERIAL_OPEN (parallel_port_name);
if (!parallel)
perror_with_name ("Unable to open parallel port.");
parallel_in_use = 1;
}
/* If we connected successfully, we know the processor is an SH3. */
sh_set_processor_type ("sh3");
}
static void
sh3_close (quitting)
int quitting;
{
monitor_close (quitting);
if (parallel_in_use) {
SERIAL_CLOSE (parallel);
parallel_in_use = 0;
}
}
void
_initialize_sh3 ()
{
init_monitor_ops (&sh3_ops);
sh3_ops.to_shortname = "sh3";
sh3_ops.to_longname = "Hitachi SH-3 rom monitor";
sh3_ops.to_doc =
#ifdef _WINDOWS
/* On windows we can talk through the parallel port too. */
"Debug on a Hitachi eval board running the SH-3 rom monitor.\n"
"Specify the serial device it is connected to (e.g. com2).\n"
"If you want to use the parallel port to download to it, specify that\n"
"as the second argument. (e.g. lpt1)";
#else
"Debug on a Hitachi eval board running the SH-3 rom monitor.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).";
#endif
sh3_ops.to_open = sh3_open;
sh3_ops.to_close = sh3_close;
add_target (&sh3_ops);
}