old-cross-binutils/sim/mips/configure.ac
Chao-ying Fu 40a5538e94 * Makefile.in (SIM_OBJS): Add dsp.o.
(dsp.o): New dependency.
(IGEN_INCLUDE): Add dsp.igen.
* configure.ac (mipsisa32r2*-*-*, mipsisa32*-*-*, mipsisa64r2*-*-*,
mipsisa64*-*-*): Add dsp to sim_igen_machine.
* configure: Regenerate.
* mips.igen: Add dsp model and include dsp.igen.
(MFHI, MFLO, MTHI, MTLO): Remove mips32, mips32r2, mips64, mips64r2,
because these instructions are extended in DSP ASE.
* sim-main.h (LAST_EMBED_REGNUM): Change from 89 to 96 because of
adding 6 DSP accumulator registers and 1 DSP control register.
(AC0LOIDX, AC0HIIDX, AC1LOIDX, AC1HIIDX, AC2LOIDX, AC2HIIDX, AC3LOIDX,
AC3HIIDX, DSPLO, DSPHI, DSPCRIDX, DSPCR, DSPCR_POS_SHIFT,
DSPCR_POS_MASK, DSPCR_POS_SMASK, DSPCR_SCOUNT_SHIFT, DSPCR_SCOUNT_MASK,
DSPCR_SCOUNT_SMASK, DSPCR_CARRY_SHIFT, DSPCR_CARRY_MASK,
DSPCR_CARRY_SMASK, DSPCR_CARRY, DSPCR_EFI_SHIFT, DSPCR_EFI_MASK,
DSPCR_EFI_SMASK, DSPCR_EFI, DSPCR_OUFLAG_SHIFT, DSPCR_OUFLAG_MASK,
DSPCR_OUFLAG_SMASK, DSPCR_OUFLAG4, DSPCR_OUFLAG5, DSPCR_OUFLAG6,
DSPCR_OUFLAG7, DSPCR_CCOND_SHIFT, DSPCR_CCOND_MASK,
DSPCR_CCOND_SMASK): New define.
(DSPLO_REGNUM, DSPHI_REGNUM): New array for DSP accumulators.
* dsp.c, dsp.igen: New files for MIPS DSP ASE.
2005-12-14 23:07:56 +00:00

437 lines
12 KiB
Text

dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.59)dnl
AC_INIT(Makefile.in)
AC_CONFIG_HEADER(config.h:config.in)
sinclude(../common/aclocal.m4)
# Bugs in autoconf 2.59 break the call to SIM_AC_COMMON, hack around
# it by inlining the macro's contents.
sinclude(../common/common.m4)
dnl Options available in this module
SIM_AC_OPTION_INLINE()
SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
SIM_AC_OPTION_HOSTENDIAN
SIM_AC_OPTION_WARNINGS
SIM_AC_OPTION_RESERVED_BITS(1)
# DEPRECATED
#
# Instead of defining a `subtarget' macro, code should be checking
# the value of {STATE,CPU}_ARCHITECTURE to identify the architecture
# in question.
#
case "${target}" in
mips64vr*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
mips*tx39*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";;
mipsisa32*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
mipsisa64*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
*) SIM_SUBTARGET="";;
esac
AC_SUBST(SIM_SUBTARGET)
#
# Select the byte order of the target
#
mips_endian=
default_endian=
case "${target}" in
mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;;
mips64*-*-*) default_endian=BIG_ENDIAN ;;
mips16*-*-*) default_endian=BIG_ENDIAN ;;
mipsisa32*-*-*) default_endian=BIG_ENDIAN ;;
mipsisa64*-*-*) default_endian=BIG_ENDIAN ;;
mips*-*-*) default_endian=BIG_ENDIAN ;;
*) default_endian=BIG_ENDIAN ;;
esac
SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian)
#
# Select the bitsize of the target
#
mips_addr_bitsize=
case "${target}" in
mips64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips16*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mipsisa32*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
mipsisa64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
*) mips_bitsize=64 ; mips_msb=63 ;;
esac
SIM_AC_OPTION_BITSIZE($mips_bitsize,$mips_msb,$mips_addr_bitsize)
#
# Select the floating hardware support of the target
#
mips_fpu=HARDWARE_FLOATING_POINT
mips_fpu_bitsize=
case "${target}" in
mips*tx39*) mips_fpu=HARD_FLOATING_POINT
mips_fpu_bitsize=32
;;
mips64*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mips16*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mipsisa32*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
mipsisa64*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
mips*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
*) mips_fpu=HARD_FLOATING_POINT ;;
esac
SIM_AC_OPTION_FLOAT($mips_fpu,$mips_fpu_bitsize)
#
# Select the level of SMP support
#
case "${target}" in
*) mips_smp=0 ;;
esac
SIM_AC_OPTION_SMP($mips_smp)
#
# Select the IGEN architecture
#
sim_gen=IGEN
sim_igen_machine="-M mipsIV"
sim_m16_machine="-M mips16,mipsIII"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
sim_mach_default="mips8000"
case "${target}" in
mips*tx39*) sim_gen=IGEN
sim_igen_filter="32,f"
sim_igen_machine="-M r3900"
;;
mips64vr43*-*-*) sim_gen=IGEN
sim_igen_machine="-M mipsIV"
sim_mach_default="mips8000"
;;
mips64vr5*-*-*) sim_gen=IGEN
sim_igen_machine="-M vr5000"
sim_mach_default="mips5000"
;;
mips64vr41*) sim_gen=M16
sim_igen_machine="-M vr4100"
sim_m16_machine="-M vr4100"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
sim_mach_default="mips4100"
;;
mips64vr-*-* | mips64vrel-*-*)
sim_gen=MULTI
sim_multi_configs="\
vr4100:mipsIII,mips16,vr4100:32,64:mips4100,mips4111\
vr4120:mipsIII,mips16,vr4120:32,64:mips4120\
vr5000:mipsIV:32,64,f:mips4300,mips5000\
vr5400:mipsIV,vr5400:32,64,f:mips5400\
vr5500:mipsIV,vr5500:32,64,f:mips5500"
sim_multi_default=mips5000
;;
mips64*-*-*) sim_igen_filter="32,64,f"
sim_gen=IGEN
;;
mips16*-*-*) sim_gen=M16
sim_igen_filter="32,64,f"
sim_m16_filter="16"
;;
mipsisa32r2*-*-*) sim_gen=M16
sim_igen_machine="-M mips32r2,mips16,mips16e,dsp"
sim_m16_machine="-M mips16,mips16e,mips32r2"
sim_igen_filter="32,f"
sim_mach_default="mipsisa32r2"
;;
mipsisa32*-*-*) sim_gen=M16
sim_igen_machine="-M mips32,mips16,mips16e,dsp"
sim_m16_machine="-M mips16,mips16e,mips32"
sim_igen_filter="32,f"
sim_mach_default="mipsisa32"
;;
mipsisa64r2*-*-*) sim_gen=M16
sim_igen_machine="-M mips64r2,mips3d,mips16,mips16e,dsp"
sim_m16_machine="-M mips16,mips16e,mips64r2"
sim_igen_filter="32,64,f"
sim_mach_default="mipsisa64r2"
;;
mipsisa64sb1*-*-*) sim_gen=IGEN
sim_igen_machine="-M mips64,mips3d,sb1"
sim_igen_filter="32,64,f"
sim_mach_default="mips_sb1"
;;
mipsisa64*-*-*) sim_gen=M16
sim_igen_machine="-M mips64,mips3d,mips16,mips16e,dsp"
sim_m16_machine="-M mips16,mips16e,mips64"
sim_igen_filter="32,64,f"
sim_mach_default="mipsisa64"
;;
mips*lsi*) sim_gen=M16
sim_igen_machine="-M mipsIII,mips16"
sim_m16_machine="-M mips16,mipsIII"
sim_igen_filter="32,f"
sim_m16_filter="16"
sim_mach_default="mips4000"
;;
mips*-*-*) sim_gen=IGEN
sim_igen_filter="32,f"
;;
esac
# The MULTI generator can combine several simulation engines into one.
# executable. A configuration which uses the MULTI should set two
# variables: ${sim_multi_configs} and ${sim_multi_default}.
#
# ${sim_multi_configs} is the list of engines to build. Each
# space-separated entry has the form NAME:MACHINE:FILTER:BFDMACHS,
# where:
#
# - NAME is a C-compatible prefix for the engine,
# - MACHINE is a -M argument,
# - FILTER is a -F argument, and
# - BFDMACHS is a comma-separated list of bfd machines that the
# simulator can run.
#
# Each entry will have a separate simulation engine whose prefix is
# m32<NAME>. If the machine list includes "mips16", there will also
# be a mips16 engine, prefix m16<NAME>. The mips16 engine will be
# generated using the same machine list as the 32-bit version,
# but the filter will be "16" instead of FILTER.
#
# The simulator compares the bfd mach against BFDMACHS to decide
# which engine to use. Entries in BFDMACHS should be bfd_mach
# values with "bfd_mach_" removed. ${sim_multi_default} says
# which entry should be the default.
if test ${sim_gen} = MULTI; then
# Simple sanity check.
if test -z "${sim_multi_configs}" || test -z "${sim_multi_default}"; then
AC_MSG_ERROR(Error in configure.in: MULTI simulator not set up correctly)
fi
# Start in a known state.
rm -f multi-include.h multi-run.c
sim_multi_flags=
sim_multi_src=
sim_multi_obj=multi-run.o
sim_multi_igen_configs=
sim_seen_default=no
cat << __EOF__ > multi-run.c
/* Main entry point for MULTI simulators.
Copyright (C) 2003 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
--
This file was generated by sim/mips/configure. */
#include "sim-main.h"
#include "multi-include.h"
#define SD sd
#define CPU cpu
void
sim_engine_run (SIM_DESC sd,
int next_cpu_nr,
int nr_cpus,
int signal) /* ignore */
{
int mach;
if (STATE_ARCHITECTURE (sd) == NULL)
mach = bfd_mach_${sim_multi_default};
else
mach = STATE_ARCHITECTURE (SD)->mach;
switch (mach)
{
__EOF__
for fc in ${sim_multi_configs}; do
# Split up the entry. ${c} contains the first three elements.
# Note: outer sqaure brackets are m4 quotes.
c=`echo ${fc} | sed ['s/:[^:]*$//']`
bfdmachs=`echo ${fc} | sed 's/.*://'`
name=`echo ${c} | sed 's/:.*//'`
machine=`echo ${c} | sed 's/.*:\(.*\):.*/\1/'`
filter=`echo ${c} | sed 's/.*://'`
# Build the following lists:
#
# sim_multi_flags: all -M and -F flags used by the simulator
# sim_multi_src: all makefile-generated source files
# sim_multi_obj: the objects for ${sim_multi_src}
# sim_multi_igen_configs: igen configuration strings.
#
# Each entry in ${sim_multi_igen_configs} is a prefix (m32
# or m16) followed by the NAME, MACHINE and FILTER part of
# the ${sim_multi_configs} entry.
sim_multi_flags="${sim_multi_flags} -F ${filter} -M ${machine}"
# Check whether mips16 handling is needed.
case ${c} in
*:*mips16*:*)
# Run igen twice, once for normal mode and once for mips16.
ws="m32 m16"
# The top-level function for the mips16 simulator is
# in a file m16${name}_run.c, generated by the
# tmp-run-multi Makefile rule.
sim_multi_src="${sim_multi_src} m16${name}_run.c"
sim_multi_obj="${sim_multi_obj} m16${name}_run.o"
sim_multi_flags="${sim_multi_flags} -F 16"
;;
*)
ws=m32
;;
esac
# Now add the list of igen-generated files to ${sim_multi_src}
# and ${sim_multi_obj}.
for w in ${ws}; do
for base in engine icache idecode model semantics support; do
sim_multi_src="${sim_multi_src} ${w}${name}_${base}.c"
sim_multi_src="${sim_multi_src} ${w}${name}_${base}.h"
sim_multi_obj="${sim_multi_obj} ${w}${name}_${base}.o"
done
sim_multi_igen_configs="${sim_multi_igen_configs} ${w}${c}"
done
# Add an include for the engine.h file. This file declares the
# top-level foo_engine_run() function.
echo "#include \"${w}${name}_engine.h\"" >> multi-include.h
# Add case statements for this engine to sim_engine_run().
for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
echo " case bfd_mach_${mach}:" >> multi-run.c
if test ${mach} = ${sim_multi_default}; then
echo " default:" >> multi-run.c
sim_seen_default=yes
fi
done
echo " ${w}${name}_engine_run (sd, next_cpu_nr, nr_cpus, signal);" \
>> multi-run.c
echo " break;" >> multi-run.c
done
# Check whether we added a 'default:' label.
if test ${sim_seen_default} = no; then
AC_MSG_ERROR(Error in configure.in: \${sim_multi_configs} doesn't have an entry for \${sim_multi_default})
fi
cat << __EOF__ >> multi-run.c
}
}
int
mips_mach_multi (SIM_DESC sd)
{
if (STATE_ARCHITECTURE (sd) == NULL)
return bfd_mach_${sim_multi_default};
switch (STATE_ARCHITECTURE (SD)->mach)
{
__EOF__
# Add case statements for this engine to mips_mach_multi().
for fc in ${sim_multi_configs}; do
# Split up the entry. ${c} contains the first three elements.
# Note: outer sqaure brackets are m4 quotes.
c=`echo ${fc} | sed ['s/:[^:]*$//']`
bfdmachs=`echo ${fc} | sed 's/.*://'`
for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
echo " case bfd_mach_${mach}:" >> multi-run.c
done
done
cat << __EOF__ >> multi-run.c
return (STATE_ARCHITECTURE (SD)->mach);
default:
return bfd_mach_${sim_multi_default};
}
}
__EOF__
SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_MULTI"
else
# For clean-extra
sim_multi_src=doesnt-exist.c
if test x"${sim_mach_default}" = x""; then
AC_MSG_ERROR(Error in configure.in: \${sim_mach_default} not defined)
fi
SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_DEFAULT=bfd_mach_${sim_mach_default}"
fi
sim_igen_flags="-F ${sim_igen_filter} ${sim_igen_machine} ${sim_igen_smp}"
sim_m16_flags=" -F ${sim_m16_filter} ${sim_m16_machine} ${sim_igen_smp}"
AC_SUBST(sim_igen_flags)
AC_SUBST(sim_m16_flags)
AC_SUBST(sim_gen)
AC_SUBST(sim_multi_flags)
AC_SUBST(sim_multi_igen_configs)
AC_SUBST(sim_multi_src)
AC_SUBST(sim_multi_obj)
#
# Add simulated hardware devices
#
hw_enabled=no
case "${target}" in
mips*tx39*)
hw_enabled=yes
hw_extra_devices="tx3904cpu tx3904irc tx3904tmr tx3904sio"
mips_extra_objs="dv-sockser.o"
SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_TX3904=1"
;;
*)
mips_extra_objs=""
;;
esac
SIM_AC_OPTION_HARDWARE($hw_enabled,$hw_devices,$hw_extra_devices)
AC_SUBST(mips_extra_objs)
# Choose simulator engine
case "${target}" in
*) mips_igen_engine="engine.o"
;;
esac
AC_SUBST(mips_igen_engine)
AC_PATH_X
mips_extra_libs=""
AC_SUBST(mips_extra_libs)
AC_CHECK_HEADERS(string.h strings.h stdlib.h stdlib.h)
AC_CHECK_LIB(m, fabs)
AC_CHECK_FUNCS(aint anint sqrt)
SIM_AC_OUTPUT