old-cross-binutils/gdb/ser-go32.c
Jim Kingdon 976bb0be03 * Makefile.in (init.c): Generate using the source, not munch. This
cleans up all kinds of hassles (which nm to use in munch, etc).  The
	new formatting conventions (mostly already followed) are that
	the name of the _initialize_* routines must start in column zero,
	and must not be inside #if.
	* munch: Removed.
	* Makefile.in: Remove references to munch.
	* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
	alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
	procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
	i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
	z8k-tdep.c: Make sure the above conventions are followed.  Make
	sure they are all declared as returning void.  Clean up
	miscellaneous comments and such.
1993-10-22 05:55:58 +00:00

386 lines
7.1 KiB
C

/* Remote serial interface for local (hardwired) serial ports for GO32.
Copyright 1992, 1993 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "serial.h"
#include <sys/dos.h>
/* This is unused for now. We just return a placeholder. */
struct go32_ttystate
{
int bogus;
};
typedef struct {
short jmp_op;
short signature;
short version;
short buffer_start;
short buffer_end;
short getp;
short putp;
short iov;
} ASYNC_STRUCT;
static int go32_open PARAMS ((serial_t scb, const char *name));
static void go32_raw PARAMS ((serial_t scb));
static int wait_for PARAMS ((serial_t scb, int timeout));
static int go32_readchar PARAMS ((serial_t scb, int timeout));
static int rate_to_code PARAMS ((int rate));
static int go32_setbaudrate PARAMS ((serial_t scb, int rate));
static int go32_write PARAMS ((serial_t scb, const char *str, int len));
static void go32_restore PARAMS ((serial_t scb));
static void go32_close PARAMS ((serial_t scb));
static serial_ttystate go32_get_tty_state PARAMS ((serial_t scb));
static int go32_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
static int strncasecmp PARAMS ((const char *str1, const char *str2, int len));
static char *aptr PARAMS ((short p));
static ASYNC_STRUCT *getivec PARAMS ((int which));
static int dos_async_init PARAMS ((int port));
static void dos_async_tx PARAMS ((const char c));
static int dos_async_ready PARAMS (());
static int dos_async_rx PARAMS (());
static int dosasync_read PARAMS ((int fd, char *buf, int len, int timeout));
static int dosasync_write PARAMS ((int fd, const char *buf, int len));
#define SIGNATURE 0x4154
#define VERSION 1
#define OFFSET 0x104
#define peek(a,b) (*(unsigned short *)(0xe0000000 + (a)*16 + (b)))
static ASYNC_STRUCT *async;
static int iov;
#define com_rb iov
#define com_tb iov
#define com_ier iov+1
#define com_ifr iov+2
#define com_bfr iov+3
#define com_mcr iov+4
#define com_lsr iov+5
#define com_msr iov+6
static int
strncasecmp(str1, str2, len)
const char *str1, *str2;
register int len;
{
unsigned char c1, c2;
for (; len != 0; --len)
{
c1 = *str1++;
c2 = *str2++;
if (toupper(c1) != toupper(c2))
return toupper(c1) - toupper(c2);
if (c1 == '\0')
return 0;
}
return 0;
}
static char *
aptr(p)
short p;
{
return (char *)((unsigned)async - OFFSET + p);
}
static ASYNC_STRUCT *
getivec(int which)
{
ASYNC_STRUCT *a;
if (peek(0, which*4) != OFFSET)
return 0;
a = (ASYNC_STRUCT *)(0xe0000000 + peek(0, which*4+2)*16 + peek(0, which*4));
if (a->signature != SIGNATURE)
return 0;
if (a->version != VERSION)
return 0;
return a;
}
static int
dos_async_init(port)
int port;
{
int i;
switch (port)
{
case 1:
async = getivec (12);
break;
case 2:
async = getivec (11);
break;
default:
return 0;
}
if (!async)
{
error("GDB cannot connect to asynctsr program, check that it is installed\n\
and that serial I/O is not being redirected (perhaps by NFS)\n\n\
example configuration:\n\
C> mode com%d:9600,n,8,1,p\n\
C> asynctsr %d\n\
C> gdb \n", port, port);
}
iov = async->iov;
outportb(com_ier, 0x0f);
outportb(com_bfr, 0x03);
outportb(com_mcr, 0x0b);
async->getp = async->putp = async->buffer_start;
return 1;
}
static void
dos_async_tx(c)
const char c;
{
while (~inportb(com_lsr) & 0x20);
outportb(com_tb, c);
}
static int
dos_async_ready()
{
return (async->getp != async->putp);
}
static int
dos_async_rx()
{
char rv;
while (!dos_async_ready())
if (kbhit())
{
printf("abort!\n");
return 0;
}
rv = *aptr(async->getp++);
if (async->getp >= async->buffer_end)
async->getp = async->buffer_start;
return rv;
}
static int
dosasync_read (fd, buf, len, timeout)
int fd;
char *buf;
int len;
int timeout;
{
long now, then;
int l = len;
time (&now);
then = now + timeout;
while (l--)
{
if (timeout)
{
while (!dos_async_ready())
{
time (&now);
if (now >= then)
return len - l - 1;
}
}
*buf++ = dos_async_rx();
}
return len;
}
static int
dosasync_write(fd, buf, len)
int fd;
const char *buf;
int len;
{
int l = len;
while (l--)
dos_async_tx (*buf++);
return len;
}
static int
go32_open (scb, name)
serial_t scb;
const char *name;
{
int port;
if (strncasecmp (name, "com", 3) != 0)
{
errno = ENOENT;
return -1;
}
port = name[3] - '0';
if ((port != 1) && (port != 2))
{
errno = ENOENT;
return -11;
}
scb->fd = dos_async_init(port);
if (!scb->fd)
return -1;
return 0;
}
static int
go32_noop (scb)
serial_t scb;
{
return 0;
}
static void
go32_raw (scb)
serial_t scb;
{
/* Always in raw mode */
}
static int
go32_readchar (scb, timeout)
serial_t scb;
int timeout;
{
char buf;
if (dosasync_read(scb->fd, &buf, 1, timeout))
return buf;
else
return SERIAL_TIMEOUT;
}
/* go32_{get set}_tty_state() are both dummys to fill out the function
vector. Someday, they may do something real... */
static serial_ttystate
go32_get_tty_state(scb)
serial_t scb;
{
struct go32_ttystate *state;
state = (struct go32_ttystate *)xmalloc(sizeof *state);
return (serial_ttystate)state;
}
static int
go32_set_tty_state(scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
struct go32_ttystate *state;
return 0;
}
static int
go32_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
serial_t scb;
serial_ttystate new_ttystate;
serial_ttystate old_ttystate;
{
return 0;
}
static void
go32_print_tty_state (scb, ttystate)
serial_t scb;
serial_ttystate ttystate;
{
/* Nothing to print. */
return;
}
static int
go32_setbaudrate (scb, rate)
serial_t scb;
int rate;
{
return 0;
}
static int
go32_write (scb, str, len)
serial_t scb;
const char *str;
int len;
{
dosasync_write(scb->fd, str, len);
return 0;
}
static void
go32_close (scb)
serial_t scb;
{
}
static struct serial_ops go32_ops =
{
"hardwire",
0,
go32_open,
go32_close,
go32_readchar,
go32_write,
go32_noop, /* flush output */
go32_noop, /* flush input */
go32_noop, /* send break -- currently used only for nindy */
go32_raw,
go32_get_tty_state,
go32_set_tty_state,
go32_print_tty_state,
go32_noflush_set_tty_state,
go32_setbaudrate,
};
void
_initialize_ser_go32 ()
{
serial_add_interface (&go32_ops);
}