old-cross-binutils/readline/rltty.c
Patrick Palka 4a11f20659 Sync readline/ to version 7.0 alpha
This patch syncs our upstream copy of readline from version 6.2 to the
latest version, 7.0 alpha (released July 10 2015).

I essentially copied what was done the last time readline was synced,
when Jan updated to readline 6.2 in 2011:
http://sourceware.org/ml/gdb-patches/2011-05/msg00003.html

Procedure:

1. I extracted the readline-7.0-alpha tarball on top of readline/.
2. I deleted all the new files under doc/ that were deliberately omitted
   before.
3. I regenerated readline/configure and readline/examples/rlfe/configure
   using autoconf 2.64.  No other configure files need regenerating.
4. I updated the function gdb_printable_part in completer.c with a
   trivial change made to the readline function it is based off of,
   printable_part in readline/complete.c.  There is more work to be done in
   completer.c to sync it with readline/complete.c, but it is non-trivial
   and should probably be done separately anyway.

Local patches that had to be reapplied:

    None.  readline 7.0 alpha contains all of our local readline
    patches.

New files in readline/:

    colors.{c,h}
    examples/{hist_erasedups,hist_purgecmd,rl-callbacktest,rlbasic}.c
    parse-colors.{c,h}
    readline.pc.in
    configure.ac

Deleted files in readline/:

    configure.in

Regressions:

After the sync there is one testsuite regression, the test
"signal SIGINT" in gdb.gdb/selftest.exp which now FAILs.  Previously,
the readline 6.2 SIGINT handler would temporarily reinstall the
underlying application's SIGINT handler and immediately re-raise SIGINT
so that the orginal handler gets invoked.  But now (since readline 6.3)
its SIGINT handler does not re-raise SIGINT or directly invoke the
original handler; it now sets a flag marking that SIGINT was raised, and
waits until readline explicitly has control to call the application's
SIGINT handler.  Anyway, because SIGINT is no longer re-raised from
within readline's SIGINT handler, doing "signal SIGINT" with a stopped
inferior gdb process will no longer resume and then immediately stop the
process (since there is no 2nd SIGINT to immediately catch).  Instead,
the inferior gdb process will now just print "Quit" and continue to run.
So with this commit, this particular test case is adjusted to reflect
this change in behavior (we now have to send a 2nd SIGINT manually to
stop it).

Aside from this one testsuite regression, I personally noticed no
regression in user-visible behavior.  Though I only tested on x86_64
and on i686 Debian Stretch.

Getting this kind of change in at the start of the GDB 7.11 development
cycle will allow us to get a lot of passive testing from developers and
from bleeding-edge users.

readline/ChangeLog.gdb:

	Import readline 7.0 alpha
	* configure: Regenerate.
	* examples/rlfe/configure: Regenerate.

gdb/ChangeLog:

	* completer.c (gdb_printable_part): Sync with readline function
	it is based off of.

gdb/testsuite/ChangeLog:

	* gdb.gdb/selftest.exp (test_with_self): Update test to now
	expect the GDB inferior to no longer immediately stop after
	being resumed with "signal SIGINT".
2015-07-25 09:53:01 -04:00

992 lines
23 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* rltty.c -- functions to prepare and restore the terminal for readline's
use. */
/* Copyright (C) 1992-2005 Free Software Foundation, Inc.
This file is part of the GNU Readline Library (Readline), a library
for reading lines of text with interactive input and history editing.
Readline is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Readline is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Readline. If not, see <http://www.gnu.org/licenses/>.
*/
#define READLINE_LIBRARY
#if defined (HAVE_CONFIG_H)
# include <config.h>
#endif
#include <sys/types.h>
#include <signal.h>
#include <errno.h>
#include <stdio.h>
#if defined (HAVE_UNISTD_H)
# include <unistd.h>
#endif /* HAVE_UNISTD_H */
#include "rldefs.h"
#include "rltty.h"
#if defined (HAVE_SYS_IOCTL_H)
# include <sys/ioctl.h> /* include for declaration of ioctl */
#endif
#include "readline.h"
#include "rlprivate.h"
#if !defined (errno)
extern int errno;
#endif /* !errno */
rl_vintfunc_t *rl_prep_term_function = rl_prep_terminal;
rl_voidfunc_t *rl_deprep_term_function = rl_deprep_terminal;
static void set_winsize PARAMS((int));
/* **************************************************************** */
/* */
/* Saving and Restoring the TTY */
/* */
/* **************************************************************** */
/* Non-zero means that the terminal is in a prepped state. There are several
flags that are OR'd in to denote whether or not we have sent various
init strings to the terminal. */
#define TPX_PREPPED 0x01
#define TPX_BRACKPASTE 0x02
#define TPX_METAKEY 0x04
static int terminal_prepped;
static _RL_TTY_CHARS _rl_tty_chars, _rl_last_tty_chars;
/* If non-zero, means that this process has called tcflow(fd, TCOOFF)
and output is suspended. */
#if defined (__ksr1__)
static int ksrflow;
#endif
/* Dummy call to force a backgrounded readline to stop before it tries
to get the tty settings. */
static void
set_winsize (tty)
int tty;
{
#if defined (TIOCGWINSZ)
struct winsize w;
if (ioctl (tty, TIOCGWINSZ, &w) == 0)
(void) ioctl (tty, TIOCSWINSZ, &w);
#endif /* TIOCGWINSZ */
}
#if defined (NO_TTY_DRIVER)
/* Nothing */
#elif defined (NEW_TTY_DRIVER)
/* Values for the `flags' field of a struct bsdtty. This tells which
elements of the struct bsdtty have been fetched from the system and
are valid. */
#define SGTTY_SET 0x01
#define LFLAG_SET 0x02
#define TCHARS_SET 0x04
#define LTCHARS_SET 0x08
struct bsdtty {
struct sgttyb sgttyb; /* Basic BSD tty driver information. */
int lflag; /* Local mode flags, like LPASS8. */
#if defined (TIOCGETC)
struct tchars tchars; /* Terminal special characters, including ^S and ^Q. */
#endif
#if defined (TIOCGLTC)
struct ltchars ltchars; /* 4.2 BSD editing characters */
#endif
int flags; /* Bitmap saying which parts of the struct are valid. */
};
#define TIOTYPE struct bsdtty
static TIOTYPE otio;
static void save_tty_chars PARAMS((TIOTYPE *));
static int _get_tty_settings PARAMS((int, TIOTYPE *));
static int get_tty_settings PARAMS((int, TIOTYPE *));
static int _set_tty_settings PARAMS((int, TIOTYPE *));
static int set_tty_settings PARAMS((int, TIOTYPE *));
static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *));
static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *));
static void
save_tty_chars (tiop)
TIOTYPE *tiop;
{
_rl_last_tty_chars = _rl_tty_chars;
if (tiop->flags & SGTTY_SET)
{
_rl_tty_chars.t_erase = tiop->sgttyb.sg_erase;
_rl_tty_chars.t_kill = tiop->sgttyb.sg_kill;
}
if (tiop->flags & TCHARS_SET)
{
_rl_intr_char = _rl_tty_chars.t_intr = tiop->tchars.t_intrc;
_rl_quit_char = _rl_tty_chars.t_quit = tiop->tchars.t_quitc;
_rl_tty_chars.t_start = tiop->tchars.t_startc;
_rl_tty_chars.t_stop = tiop->tchars.t_stopc;
_rl_tty_chars.t_eof = tiop->tchars.t_eofc;
_rl_tty_chars.t_eol = '\n';
_rl_tty_chars.t_eol2 = tiop->tchars.t_brkc;
}
if (tiop->flags & LTCHARS_SET)
{
_rl_susp_char = _rl_tty_chars.t_susp = tiop->ltchars.t_suspc;
_rl_tty_chars.t_dsusp = tiop->ltchars.t_dsuspc;
_rl_tty_chars.t_reprint = tiop->ltchars.t_rprntc;
_rl_tty_chars.t_flush = tiop->ltchars.t_flushc;
_rl_tty_chars.t_werase = tiop->ltchars.t_werasc;
_rl_tty_chars.t_lnext = tiop->ltchars.t_lnextc;
}
_rl_tty_chars.t_status = -1;
}
static int
get_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
set_winsize (tty);
tiop->flags = tiop->lflag = 0;
errno = 0;
if (ioctl (tty, TIOCGETP, &(tiop->sgttyb)) < 0)
return -1;
tiop->flags |= SGTTY_SET;
#if defined (TIOCLGET)
if (ioctl (tty, TIOCLGET, &(tiop->lflag)) == 0)
tiop->flags |= LFLAG_SET;
#endif
#if defined (TIOCGETC)
if (ioctl (tty, TIOCGETC, &(tiop->tchars)) == 0)
tiop->flags |= TCHARS_SET;
#endif
#if defined (TIOCGLTC)
if (ioctl (tty, TIOCGLTC, &(tiop->ltchars)) == 0)
tiop->flags |= LTCHARS_SET;
#endif
return 0;
}
static int
set_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
if (tiop->flags & SGTTY_SET)
{
ioctl (tty, TIOCSETN, &(tiop->sgttyb));
tiop->flags &= ~SGTTY_SET;
}
_rl_echoing_p = 1;
#if defined (TIOCLSET)
if (tiop->flags & LFLAG_SET)
{
ioctl (tty, TIOCLSET, &(tiop->lflag));
tiop->flags &= ~LFLAG_SET;
}
#endif
#if defined (TIOCSETC)
if (tiop->flags & TCHARS_SET)
{
ioctl (tty, TIOCSETC, &(tiop->tchars));
tiop->flags &= ~TCHARS_SET;
}
#endif
#if defined (TIOCSLTC)
if (tiop->flags & LTCHARS_SET)
{
ioctl (tty, TIOCSLTC, &(tiop->ltchars));
tiop->flags &= ~LTCHARS_SET;
}
#endif
return 0;
}
static void
prepare_terminal_settings (meta_flag, oldtio, tiop)
int meta_flag;
TIOTYPE oldtio, *tiop;
{
_rl_echoing_p = (oldtio.sgttyb.sg_flags & ECHO);
_rl_echoctl = (oldtio.sgttyb.sg_flags & ECHOCTL);
/* Copy the original settings to the structure we're going to use for
our settings. */
tiop->sgttyb = oldtio.sgttyb;
tiop->lflag = oldtio.lflag;
#if defined (TIOCGETC)
tiop->tchars = oldtio.tchars;
#endif
#if defined (TIOCGLTC)
tiop->ltchars = oldtio.ltchars;
#endif
tiop->flags = oldtio.flags;
/* First, the basic settings to put us into character-at-a-time, no-echo
input mode. */
tiop->sgttyb.sg_flags &= ~(ECHO | CRMOD);
tiop->sgttyb.sg_flags |= CBREAK;
/* If this terminal doesn't care how the 8th bit is used, then we can
use it for the meta-key. If only one of even or odd parity is
specified, then the terminal is using parity, and we cannot. */
#if !defined (ANYP)
# define ANYP (EVENP | ODDP)
#endif
if (((oldtio.sgttyb.sg_flags & ANYP) == ANYP) ||
((oldtio.sgttyb.sg_flags & ANYP) == 0))
{
tiop->sgttyb.sg_flags |= ANYP;
/* Hack on local mode flags if we can. */
#if defined (TIOCLGET)
# if defined (LPASS8)
tiop->lflag |= LPASS8;
# endif /* LPASS8 */
#endif /* TIOCLGET */
}
#if defined (TIOCGETC)
# if defined (USE_XON_XOFF)
/* Get rid of terminal output start and stop characters. */
tiop->tchars.t_stopc = -1; /* C-s */
tiop->tchars.t_startc = -1; /* C-q */
/* If there is an XON character, bind it to restart the output. */
if (oldtio.tchars.t_startc != -1)
rl_bind_key (oldtio.tchars.t_startc, rl_restart_output);
# endif /* USE_XON_XOFF */
/* If there is an EOF char, bind _rl_eof_char to it. */
if (oldtio.tchars.t_eofc != -1)
_rl_eof_char = oldtio.tchars.t_eofc;
# if defined (NO_KILL_INTR)
/* Get rid of terminal-generated SIGQUIT and SIGINT. */
tiop->tchars.t_quitc = -1; /* C-\ */
tiop->tchars.t_intrc = -1; /* C-c */
# endif /* NO_KILL_INTR */
#endif /* TIOCGETC */
#if defined (TIOCGLTC)
/* Make the interrupt keys go away. Just enough to make people happy. */
tiop->ltchars.t_dsuspc = -1; /* C-y */
tiop->ltchars.t_lnextc = -1; /* C-v */
#endif /* TIOCGLTC */
}
#else /* !defined (NEW_TTY_DRIVER) */
#if !defined (VMIN)
# define VMIN VEOF
#endif
#if !defined (VTIME)
# define VTIME VEOL
#endif
#if defined (TERMIOS_TTY_DRIVER)
# define TIOTYPE struct termios
# define DRAIN_OUTPUT(fd) tcdrain (fd)
# define GETATTR(tty, tiop) (tcgetattr (tty, tiop))
# ifdef M_UNIX
# define SETATTR(tty, tiop) (tcsetattr (tty, TCSANOW, tiop))
# else
# define SETATTR(tty, tiop) (tcsetattr (tty, TCSADRAIN, tiop))
# endif /* !M_UNIX */
#else
# define TIOTYPE struct termio
# define DRAIN_OUTPUT(fd)
# define GETATTR(tty, tiop) (ioctl (tty, TCGETA, tiop))
# define SETATTR(tty, tiop) (ioctl (tty, TCSETAW, tiop))
#endif /* !TERMIOS_TTY_DRIVER */
static TIOTYPE otio;
static void save_tty_chars PARAMS((TIOTYPE *));
static int _get_tty_settings PARAMS((int, TIOTYPE *));
static int get_tty_settings PARAMS((int, TIOTYPE *));
static int _set_tty_settings PARAMS((int, TIOTYPE *));
static int set_tty_settings PARAMS((int, TIOTYPE *));
static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *));
static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *));
static void _rl_bind_tty_special_chars PARAMS((Keymap, TIOTYPE));
#if defined (FLUSHO)
# define OUTPUT_BEING_FLUSHED(tp) (tp->c_lflag & FLUSHO)
#else
# define OUTPUT_BEING_FLUSHED(tp) 0
#endif
static void
save_tty_chars (tiop)
TIOTYPE *tiop;
{
_rl_last_tty_chars = _rl_tty_chars;
_rl_tty_chars.t_eof = tiop->c_cc[VEOF];
_rl_tty_chars.t_eol = tiop->c_cc[VEOL];
#ifdef VEOL2
_rl_tty_chars.t_eol2 = tiop->c_cc[VEOL2];
#endif
_rl_tty_chars.t_erase = tiop->c_cc[VERASE];
#ifdef VWERASE
_rl_tty_chars.t_werase = tiop->c_cc[VWERASE];
#endif
_rl_tty_chars.t_kill = tiop->c_cc[VKILL];
#ifdef VREPRINT
_rl_tty_chars.t_reprint = tiop->c_cc[VREPRINT];
#endif
_rl_intr_char = _rl_tty_chars.t_intr = tiop->c_cc[VINTR];
_rl_quit_char = _rl_tty_chars.t_quit = tiop->c_cc[VQUIT];
#ifdef VSUSP
_rl_susp_char = _rl_tty_chars.t_susp = tiop->c_cc[VSUSP];
#endif
#ifdef VDSUSP
_rl_tty_chars.t_dsusp = tiop->c_cc[VDSUSP];
#endif
#ifdef VSTART
_rl_tty_chars.t_start = tiop->c_cc[VSTART];
#endif
#ifdef VSTOP
_rl_tty_chars.t_stop = tiop->c_cc[VSTOP];
#endif
#ifdef VLNEXT
_rl_tty_chars.t_lnext = tiop->c_cc[VLNEXT];
#endif
#ifdef VDISCARD
_rl_tty_chars.t_flush = tiop->c_cc[VDISCARD];
#endif
#ifdef VSTATUS
_rl_tty_chars.t_status = tiop->c_cc[VSTATUS];
#endif
}
#if defined (_AIX) || defined (_AIX41)
/* Currently this is only used on AIX */
static void
rltty_warning (msg)
char *msg;
{
_rl_errmsg ("warning: %s", msg);
}
#endif
#if defined (_AIX)
void
setopost(tp)
TIOTYPE *tp;
{
if ((tp->c_oflag & OPOST) == 0)
{
_rl_errmsg ("warning: turning on OPOST for terminal\r");
tp->c_oflag |= OPOST|ONLCR;
}
}
#endif
static int
_get_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
int ioctl_ret;
while (1)
{
ioctl_ret = GETATTR (tty, tiop);
if (ioctl_ret < 0)
{
if (errno != EINTR)
return -1;
else
continue;
}
if (OUTPUT_BEING_FLUSHED (tiop))
{
#if defined (FLUSHO)
_rl_errmsg ("warning: turning off output flushing");
tiop->c_lflag &= ~FLUSHO;
break;
#else
continue;
#endif
}
break;
}
return 0;
}
static int
get_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
set_winsize (tty);
errno = 0;
if (_get_tty_settings (tty, tiop) < 0)
return -1;
#if defined (_AIX)
setopost(tiop);
#endif
return 0;
}
static int
_set_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
while (SETATTR (tty, tiop) < 0)
{
if (errno != EINTR)
return -1;
errno = 0;
}
return 0;
}
static int
set_tty_settings (tty, tiop)
int tty;
TIOTYPE *tiop;
{
if (_set_tty_settings (tty, tiop) < 0)
return -1;
#if 0
#if defined (TERMIOS_TTY_DRIVER)
# if defined (__ksr1__)
if (ksrflow)
{
ksrflow = 0;
tcflow (tty, TCOON);
}
# else /* !ksr1 */
tcflow (tty, TCOON); /* Simulate a ^Q. */
# endif /* !ksr1 */
#else
ioctl (tty, TCXONC, 1); /* Simulate a ^Q. */
#endif /* !TERMIOS_TTY_DRIVER */
#endif /* 0 */
return 0;
}
static void
prepare_terminal_settings (meta_flag, oldtio, tiop)
int meta_flag;
TIOTYPE oldtio, *tiop;
{
_rl_echoing_p = (oldtio.c_lflag & ECHO);
#if defined (ECHOCTL)
_rl_echoctl = (oldtio.c_lflag & ECHOCTL);
#endif
tiop->c_lflag &= ~(ICANON | ECHO);
if ((unsigned char) oldtio.c_cc[VEOF] != (unsigned char) _POSIX_VDISABLE)
_rl_eof_char = oldtio.c_cc[VEOF];
#if defined (USE_XON_XOFF)
#if defined (IXANY)
tiop->c_iflag &= ~(IXON | IXANY);
#else
/* `strict' Posix systems do not define IXANY. */
tiop->c_iflag &= ~IXON;
#endif /* IXANY */
#endif /* USE_XON_XOFF */
/* Only turn this off if we are using all 8 bits. */
if (((tiop->c_cflag & CSIZE) == CS8) || meta_flag)
tiop->c_iflag &= ~(ISTRIP | INPCK);
/* Make sure we differentiate between CR and NL on input. */
tiop->c_iflag &= ~(ICRNL | INLCR);
#if !defined (HANDLE_SIGNALS)
tiop->c_lflag &= ~ISIG;
#else
tiop->c_lflag |= ISIG;
#endif
tiop->c_cc[VMIN] = 1;
tiop->c_cc[VTIME] = 0;
#if defined (FLUSHO)
if (OUTPUT_BEING_FLUSHED (tiop))
{
tiop->c_lflag &= ~FLUSHO;
oldtio.c_lflag &= ~FLUSHO;
}
#endif
/* Turn off characters that we need on Posix systems with job control,
just to be sure. This includes ^Y and ^V. This should not really
be necessary. */
#if defined (TERMIOS_TTY_DRIVER) && defined (_POSIX_VDISABLE)
#if defined (VLNEXT)
tiop->c_cc[VLNEXT] = _POSIX_VDISABLE;
#endif
#if defined (VDSUSP)
tiop->c_cc[VDSUSP] = _POSIX_VDISABLE;
#endif
#endif /* TERMIOS_TTY_DRIVER && _POSIX_VDISABLE */
}
#endif /* !NEW_TTY_DRIVER */
/* Put the terminal in CBREAK mode so that we can detect key presses. */
#if defined (NO_TTY_DRIVER)
void
rl_prep_terminal (meta_flag)
int meta_flag;
{
_rl_echoing_p = 1;
}
void
rl_deprep_terminal ()
{
}
#else /* ! NO_TTY_DRIVER */
void
rl_prep_terminal (meta_flag)
int meta_flag;
{
int tty, nprep;
TIOTYPE tio;
if (terminal_prepped)
return;
/* Try to keep this function from being INTerrupted. */
_rl_block_sigint ();
tty = rl_instream ? fileno (rl_instream) : fileno (stdin);
if (get_tty_settings (tty, &tio) < 0)
{
#if defined (ENOTSUP)
/* MacOS X and Linux, at least, lie about the value of errno if
tcgetattr fails. */
if (errno == ENOTTY || errno == EINVAL || errno == ENOTSUP)
#else
if (errno == ENOTTY || errno == EINVAL)
#endif
_rl_echoing_p = 1; /* XXX */
_rl_release_sigint ();
return;
}
otio = tio;
if (_rl_bind_stty_chars)
{
#if defined (VI_MODE)
/* If editing in vi mode, make sure we restore the bindings in the
insertion keymap no matter what keymap we ended up in. */
if (rl_editing_mode == vi_mode)
rl_tty_unset_default_bindings (vi_insertion_keymap);
else
#endif
rl_tty_unset_default_bindings (_rl_keymap);
}
save_tty_chars (&otio);
RL_SETSTATE(RL_STATE_TTYCSAVED);
if (_rl_bind_stty_chars)
{
#if defined (VI_MODE)
/* If editing in vi mode, make sure we set the bindings in the
insertion keymap no matter what keymap we ended up in. */
if (rl_editing_mode == vi_mode)
_rl_bind_tty_special_chars (vi_insertion_keymap, tio);
else
#endif
_rl_bind_tty_special_chars (_rl_keymap, tio);
}
prepare_terminal_settings (meta_flag, otio, &tio);
if (set_tty_settings (tty, &tio) < 0)
{
_rl_release_sigint ();
return;
}
if (_rl_enable_keypad)
_rl_control_keypad (1);
nprep = TPX_PREPPED;
if (_rl_enable_bracketed_paste)
{
fprintf (rl_outstream, BRACK_PASTE_INIT);
nprep |= TPX_BRACKPASTE;
}
fflush (rl_outstream);
terminal_prepped = nprep;
RL_SETSTATE(RL_STATE_TERMPREPPED);
_rl_release_sigint ();
}
/* Restore the terminal's normal settings and modes. */
void
rl_deprep_terminal ()
{
int tty;
if (terminal_prepped == 0)
return;
/* Try to keep this function from being interrupted. */
_rl_block_sigint ();
tty = rl_instream ? fileno (rl_instream) : fileno (stdin);
if (terminal_prepped & TPX_BRACKPASTE)
fprintf (rl_outstream, BRACK_PASTE_FINI);
if (_rl_enable_keypad)
_rl_control_keypad (0);
fflush (rl_outstream);
if (set_tty_settings (tty, &otio) < 0)
{
_rl_release_sigint ();
return;
}
terminal_prepped = 0;
RL_UNSETSTATE(RL_STATE_TERMPREPPED);
_rl_release_sigint ();
}
#endif /* !NO_TTY_DRIVER */
/* **************************************************************** */
/* */
/* Bogus Flow Control */
/* */
/* **************************************************************** */
int
rl_restart_output (count, key)
int count, key;
{
#if defined (__MINGW32__)
return 0;
#else /* !__MING32__ */
int fildes = fileno (rl_outstream);
#if defined (TIOCSTART)
#if defined (apollo)
ioctl (&fildes, TIOCSTART, 0);
#else
ioctl (fildes, TIOCSTART, 0);
#endif /* apollo */
#else /* !TIOCSTART */
# if defined (TERMIOS_TTY_DRIVER)
# if defined (__ksr1__)
if (ksrflow)
{
ksrflow = 0;
tcflow (fildes, TCOON);
}
# else /* !ksr1 */
tcflow (fildes, TCOON); /* Simulate a ^Q. */
# endif /* !ksr1 */
# else /* !TERMIOS_TTY_DRIVER */
# if defined (TCXONC)
ioctl (fildes, TCXONC, TCOON);
# endif /* TCXONC */
# endif /* !TERMIOS_TTY_DRIVER */
#endif /* !TIOCSTART */
return 0;
#endif /* !__MINGW32__ */
}
int
rl_stop_output (count, key)
int count, key;
{
#if defined (__MINGW32__)
return 0;
#else
int fildes = fileno (rl_instream);
#if defined (TIOCSTOP)
# if defined (apollo)
ioctl (&fildes, TIOCSTOP, 0);
# else
ioctl (fildes, TIOCSTOP, 0);
# endif /* apollo */
#else /* !TIOCSTOP */
# if defined (TERMIOS_TTY_DRIVER)
# if defined (__ksr1__)
ksrflow = 1;
# endif /* ksr1 */
tcflow (fildes, TCOOFF);
# else
# if defined (TCXONC)
ioctl (fildes, TCXONC, TCOON);
# endif /* TCXONC */
# endif /* !TERMIOS_TTY_DRIVER */
#endif /* !TIOCSTOP */
return 0;
#endif /* !__MINGW32__ */
}
/* **************************************************************** */
/* */
/* Default Key Bindings */
/* */
/* **************************************************************** */
#if !defined (NO_TTY_DRIVER)
#define SET_SPECIAL(sc, func) set_special_char(kmap, &ttybuff, sc, func)
#endif
#if defined (NO_TTY_DRIVER)
#define SET_SPECIAL(sc, func)
#define RESET_SPECIAL(c)
#elif defined (NEW_TTY_DRIVER)
static void
set_special_char (kmap, tiop, sc, func)
Keymap kmap;
TIOTYPE *tiop;
int sc;
rl_command_func_t *func;
{
if (sc != -1 && kmap[(unsigned char)sc].type == ISFUNC)
kmap[(unsigned char)sc].function = func;
}
#define RESET_SPECIAL(c) \
if (c != -1 && kmap[(unsigned char)c].type == ISFUNC) \
kmap[(unsigned char)c].function = rl_insert;
static void
_rl_bind_tty_special_chars (kmap, ttybuff)
Keymap kmap;
TIOTYPE ttybuff;
{
if (ttybuff.flags & SGTTY_SET)
{
SET_SPECIAL (ttybuff.sgttyb.sg_erase, rl_rubout);
SET_SPECIAL (ttybuff.sgttyb.sg_kill, rl_unix_line_discard);
}
# if defined (TIOCGLTC)
if (ttybuff.flags & LTCHARS_SET)
{
SET_SPECIAL (ttybuff.ltchars.t_werasc, rl_unix_word_rubout);
SET_SPECIAL (ttybuff.ltchars.t_lnextc, rl_quoted_insert);
}
# endif /* TIOCGLTC */
}
#else /* !NEW_TTY_DRIVER */
static void
set_special_char (kmap, tiop, sc, func)
Keymap kmap;
TIOTYPE *tiop;
int sc;
rl_command_func_t *func;
{
unsigned char uc;
uc = tiop->c_cc[sc];
if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC)
kmap[uc].function = func;
}
/* used later */
#define RESET_SPECIAL(uc) \
if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) \
kmap[uc].function = rl_insert;
static void
_rl_bind_tty_special_chars (kmap, ttybuff)
Keymap kmap;
TIOTYPE ttybuff;
{
SET_SPECIAL (VERASE, rl_rubout);
SET_SPECIAL (VKILL, rl_unix_line_discard);
# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER)
SET_SPECIAL (VLNEXT, rl_quoted_insert);
# endif /* VLNEXT && TERMIOS_TTY_DRIVER */
# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER)
SET_SPECIAL (VWERASE, rl_unix_word_rubout);
# endif /* VWERASE && TERMIOS_TTY_DRIVER */
}
#endif /* !NEW_TTY_DRIVER */
/* Set the system's default editing characters to their readline equivalents
in KMAP. Should be static, now that we have rl_tty_set_default_bindings. */
void
rltty_set_default_bindings (kmap)
Keymap kmap;
{
#if !defined (NO_TTY_DRIVER)
TIOTYPE ttybuff;
int tty;
tty = fileno (rl_instream);
if (get_tty_settings (tty, &ttybuff) == 0)
_rl_bind_tty_special_chars (kmap, ttybuff);
#endif
}
/* New public way to set the system default editing chars to their readline
equivalents. */
void
rl_tty_set_default_bindings (kmap)
Keymap kmap;
{
rltty_set_default_bindings (kmap);
}
/* Rebind all of the tty special chars that readline worries about back
to self-insert. Call this before saving the current terminal special
chars with save_tty_chars(). This only works on POSIX termios or termio
systems. */
void
rl_tty_unset_default_bindings (kmap)
Keymap kmap;
{
/* Don't bother before we've saved the tty special chars at least once. */
if (RL_ISSTATE(RL_STATE_TTYCSAVED) == 0)
return;
RESET_SPECIAL (_rl_tty_chars.t_erase);
RESET_SPECIAL (_rl_tty_chars.t_kill);
# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER)
RESET_SPECIAL (_rl_tty_chars.t_lnext);
# endif /* VLNEXT && TERMIOS_TTY_DRIVER */
# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER)
RESET_SPECIAL (_rl_tty_chars.t_werase);
# endif /* VWERASE && TERMIOS_TTY_DRIVER */
}
#if defined (HANDLE_SIGNALS)
#if defined (NEW_TTY_DRIVER) || defined (NO_TTY_DRIVER)
int
_rl_disable_tty_signals ()
{
return 0;
}
int
_rl_restore_tty_signals ()
{
return 0;
}
#else
static TIOTYPE sigstty, nosigstty;
static int tty_sigs_disabled = 0;
int
_rl_disable_tty_signals ()
{
if (tty_sigs_disabled)
return 0;
if (_get_tty_settings (fileno (rl_instream), &sigstty) < 0)
return -1;
nosigstty = sigstty;
nosigstty.c_lflag &= ~ISIG;
nosigstty.c_iflag &= ~IXON;
if (_set_tty_settings (fileno (rl_instream), &nosigstty) < 0)
return (_set_tty_settings (fileno (rl_instream), &sigstty));
tty_sigs_disabled = 1;
return 0;
}
int
_rl_restore_tty_signals ()
{
int r;
if (tty_sigs_disabled == 0)
return 0;
r = _set_tty_settings (fileno (rl_instream), &sigstty);
if (r == 0)
tty_sigs_disabled = 0;
return r;
}
#endif /* !NEW_TTY_DRIVER */
#endif /* HANDLE_SIGNALS */