old-cross-binutils/ld/scripttempl/xstormy16.sc
H.J. Lu 34734a010b Include compressed DWARF debug sections in ELF linker scripts.
binutils/testsuite/

2010-11-02  H.J. Lu  <hongjiu.lu@intel.com>

	* binutils-all/libdw2.out: Also accept MIPS_DWARF.

ld/

2010-11-02  H.J. Lu  <hongjiu.lu@intel.com>

	* scripttempl/armbpabi.sc: Include compressed DWARF debug
	sections.
	* scripttempl/avr.sc: Likewise.
	* scripttempl/elf32cr16.sc: Likewise.
	* scripttempl/elf32crx.sc: Likewise.
	* scripttempl/elf32msp430.sc: Likewise.
	* scripttempl/elf32msp430_3.sc: Likewise.
	* scripttempl/elf32sh-symbian.sc: Likewise.
	* scripttempl/elf64hppa.sc: Likewise.
	* scripttempl/elf_chaos.sc: Likewise.
	* scripttempl/elfd10v.sc: Likewise.
	* scripttempl/elfd30v.sc: Likewise.
	* scripttempl/elfi370.sc: Likewise.
	* scripttempl/elfm68hc11.sc: Likewise.
	* scripttempl/elfm68hc12.sc: Likewise.
	* scripttempl/elfxtensa.sc: Likewise.
	* scripttempl/ip2k.sc: Likewise.
	* scripttempl/iq2000.sc: Likewise.
	* scripttempl/mep.sc: Likewise.
	* scripttempl/mmo.sc: Likewise.
	* scripttempl/v850.sc: Likewise.
	* scripttempl/xstormy16.sc: Likewise.

ld/testsuite/

2010-11-02  H.J. Lu  <hongjiu.lu@intel.com>

	* ld-elf/compress1a.d: Also check MIPS_DWARF.
	* ld-elf/compress1b.d: Likewise.
	* ld-elf/compress1c.d: Likewise.
2010-11-02 13:47:44 +00:00

241 lines
8.4 KiB
Scala

#
# Unusual variables checked by this code:
# NOP - two byte opcode for no-op (defaults to 0)
# INITIAL_READONLY_SECTIONS - at start of text segment
# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
# (e.g., .PARISC.milli)
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
# TEXT_START_SYMBOLS - symbols that appear at the start of the
# .text section.
# DATA_START_SYMBOLS - symbols that appear at the start of the
# .data section.
# OTHER_GOT_SYMBOLS - symbols defined just before .got.
# OTHER_GOT_SECTIONS - sections just after .got and .sdata.
# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
# .bss section besides __bss_start.
# INPUT_FILES - INPUT command of files to always include
# INIT_START, INIT_END - statements just before and just after
# combination of .init sections.
# FINI_START, FINI_END - statements just before and just after
# combination of .fini sections.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#
# Many sections come in three flavours. There is the 'real' section,
# like ".data". Then there are the per-procedure or per-variable
# sections, generated by -ffunction-sections and -fdata-sections in GCC,
# and useful for --gc-sections, which for a variable "foo" might be
# ".data.foo". Then there are the linkonce sections, for which the linker
# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
# The exact correspondences are:
#
# Section Linkonce section
# .text .gnu.linkonce.t.foo
# .rodata .gnu.linkonce.r.foo
# .data .gnu.linkonce.d.foo
# .bss .gnu.linkonce.b.foo
# .sdata .gnu.linkonce.s.foo
# .sbss .gnu.linkonce.sb.foo
# .sdata2 .gnu.linkonce.s2.foo
# .sbss2 .gnu.linkonce.sb2.foo
#
# Each of these can also have corresponding .rel.* and .rela.* sections.
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
/* gcc uses crtbegin.o to find the start of
the constructors, so we make sure it is
first. Because this is a wildcard, it
doesn't matter if the user does not
actually link against crtbegin.o; the
linker won't look for a file to match a
wildcard. The wildcard also means that it
doesn't matter which directory crtbegin.o
is in. */
KEEP (*crtbegin.o(.ctors))
KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
} > ROM"
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
KEEP (*crtbegin.o(.dtors))
KEEP (*crtbegin?.o(.dtors))
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
} > ROM"
cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
"${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
${RELOCATING+ENTRY(${ENTRY})}
${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
if gld -r is used and the intermediate file has sections starting
at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
bug. But for now assigning the zero vmas works. */}
/* There are two memory regions we care about, one from 0 through 0x7F00
that is RAM and one from 0x8000 up which is ROM. */
MEMORY
{
RAM (w) : ORIGIN = 0, LENGTH = 0x7F00
ROM (!w) : ORIGIN = 0x8000, LENGTH = 0xFF8000
}
SECTIONS
{
.data ${RELOCATING-0} :
{
${RELOCATING+__rdata = .;}
${RELOCATING+__data = .;}
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data)
${RELOCATING+*(.data.*)}
${RELOCATING+*(.gnu.linkonce.d.*)}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
} > RAM
${RELOCATING+${OTHER_READWRITE_SECTIONS}}
${RELOCATING+${OTHER_GOT_SYMBOLS}}
${RELOCATING+${OTHER_GOT_SECTIONS}}
${RELOCATING+_edata = .;}
${RELOCATING+PROVIDE (edata = .);}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
.bss ${RELOCATING-0} :
{
*(.dynbss)
*(.bss)
${RELOCATING+*(.bss.*)}
${RELOCATING+*(.gnu.linkonce.b.*)}
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
.bss section disappears because there are no input sections. */
${RELOCATING+. = ALIGN(${ALIGNMENT});}
} > RAM
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+${OTHER_END_SYMBOLS}}
${RELOCATING+_end = .;}
${RELOCATING+__stack = .;}
${RELOCATING+PROVIDE (end = .);}
/* Read-only sections in ROM. */
.int_vec ${RELOCATING-0} : { *(.int_vec) } ${RELOCATING+> ROM}
.rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} } ${RELOCATING+> ROM}
${RELOCATING+${CTOR}}
${RELOCATING+${DTOR}}
.jcr : { KEEP (*(.jcr)) } ${RELOCATING+> ROM}
.eh_frame : { KEEP (*(.eh_frame)) } ${RELOCATING+> ROM}
.gcc_except_table : { *(.gcc_except_table) *(.gcc_except_table.*) } ${RELOCATING+> ROM}
.plt : { *(.plt) } ${RELOCATING+> ROM}
.text ${RELOCATING-0} :
{
${RELOCATING+${TEXT_START_SYMBOLS}}
*(.text)
${RELOCATING+*(.text.*)}
*(.stub)
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
${RELOCATING+*(.gnu.linkonce.t.*)}
${RELOCATING+${OTHER_TEXT_SECTIONS}}
} ${RELOCATING+> ROM =${NOP-0}}
.init ${RELOCATING-0} :
{
${RELOCATING+${INIT_START}}
KEEP (*(.init))
${RELOCATING+${INIT_END}}
} ${RELOCATING+> ROM =${NOP-0}}
.fini ${RELOCATING-0} :
{
${RELOCATING+${FINI_START}}
KEEP (*(.fini))
${RELOCATING+${FINI_END}}
} ${RELOCATING+> ROM =${NOP-0}}
${RELOCATING+PROVIDE (__etext = .);}
${RELOCATING+PROVIDE (_etext = .);}
${RELOCATING+PROVIDE (etext = .);}
${RELOCATING+${OTHER_READONLY_SECTIONS}}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo .zdebug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames .zdebug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges .zdebug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames .zdebug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*} .zdebug_info) }
.debug_abbrev 0 : { *(.debug_abbrev .zdebug_abbrev) }
.debug_line 0 : { *(.debug_line .zdebug_line) }
.debug_frame 0 : { *(.debug_frame .zdebug_frame) }
.debug_str 0 : { *(.debug_str .zdebug_str) }
.debug_loc 0 : { *(.debug_loc .zdebug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo .zdebug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames .zdebug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames .zdebug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames .zdebug_typenames) }
.debug_varnames 0 : { *(.debug_varnames .zdebug_varnames) }
${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
/* These must appear regardless of ${RELOCATING}. */
${OTHER_SECTIONS}
}
EOF