old-cross-binutils/gdb/testsuite/gdb.base/d10vovly.c
1999-04-16 01:35:26 +00:00

225 lines
5.7 KiB
C

/*
* Ovlymgr.c -- Runtime Overlay Manager for the GDB testsuite.
*/
#include "ovlymgr.h"
/* Local functions and data: */
extern unsigned long _ovly_table[][4];
extern unsigned long _novlys __attribute__ ((section (".data")));
enum ovly_index { VMA, SIZE, LMA, MAPPED};
static void ovly_copy (unsigned long dst, unsigned long src, long size);
/* Flush the data and instruction caches at address START for SIZE bytes.
Support for each new port must be added here. */
/* FIXME: Might be better to have a standard libgloss function that
ports provide that we can then use. Use libgloss instead of newlib
since libgloss is the one intended to handle low level system issues.
I would suggest something like _flush_cache to avoid the user's namespace
but not be completely obscure as other things may need this facility. */
static void
FlushCache (void)
{
#ifdef __M32R__
volatile char *mspr = (char *) 0xfffffff7;
*mspr = 1;
#endif
}
/* OverlayLoad:
* Copy the overlay into its runtime region,
* and mark the overlay as "mapped".
*/
bool
OverlayLoad (unsigned long ovlyno)
{
unsigned long i;
if (ovlyno < 0 || ovlyno >= _novlys)
exit (-1); /* fail, bad ovly number */
if (_ovly_table[ovlyno][MAPPED])
return TRUE; /* this overlay already mapped -- nothing to do! */
for (i = 0; i < _novlys; i++)
if (i == ovlyno)
_ovly_table[i][MAPPED] = 1; /* this one now mapped */
else if (_ovly_table[i][VMA] == _ovly_table[ovlyno][VMA])
_ovly_table[i][MAPPED] = 0; /* this one now un-mapped */
ovly_copy (_ovly_table[ovlyno][VMA],
_ovly_table[ovlyno][LMA],
_ovly_table[ovlyno][SIZE]);
FlushCache ();
return TRUE;
}
/* OverlayUnload:
* Copy the overlay back into its "load" region.
* Does NOT mark overlay as "unmapped", therefore may be called
* more than once for the same mapped overlay.
*/
bool
OverlayUnload (unsigned long ovlyno)
{
if (ovlyno < 0 || ovlyno >= _novlys)
exit (-1); /* fail, bad ovly number */
if (!_ovly_table[ovlyno][MAPPED])
exit (-1); /* error, can't copy out a segment that's not "in" */
ovly_copy (_ovly_table[ovlyno][LMA],
_ovly_table[ovlyno][VMA],
_ovly_table[ovlyno][SIZE]);
return TRUE;
}
#ifdef __D10V__
#define IMAP0 (*(short *)(0xff00))
#define IMAP1 (*(short *)(0xff02))
#define DMAP (*(short *)(0xff04))
static void
D10VTranslate (unsigned long logical,
short *dmap,
unsigned long **addr)
{
unsigned long physical;
unsigned long seg;
unsigned long off;
/* to access data, we use the following mapping
0x00xxxxxx: Logical data address segment (DMAP translated memory)
0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
0x10xxxxxx: Physical data memory segment (On-chip data memory)
0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
0x12xxxxxx: Phisical unified memory segment (Unified memory)
*/
/* Addresses must be correctly aligned */
if (logical & (sizeof (**addr) - 1))
exit (-1);
/* If the address is in one of the two logical address spaces, it is
first translated into a physical address */
seg = (logical >> 24);
off = (logical & 0xffffffL);
switch (seg)
{
case 0x00: /* in logical data address segment */
if (off <= 0x7fffL)
physical = (0x10L << 24) + off;
else
/* Logical address out side of on-chip segment, not
supported */
exit (-1);
break;
case 0x01: /* in logical instruction address segment */
{
short map;
if (off <= 0x1ffffL)
map = IMAP0;
else if (off <= 0x3ffffL)
map = IMAP1;
else
/* Logical address outside of IMAP[01] segment, not
supported */
exit (-1);
if (map & 0x1000L)
{
/* Instruction memory */
physical = (0x11L << 24) | off;
}
else
{
/* Unified memory */
physical = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
if (physical > 0xffffffL)
/* Address outside of unified address segment */
exit (-1);
physical |= (0x12L << 24);
}
break;
}
case 0x10:
case 0x11:
case 0x12:
physical = logical;
break;
default:
exit (-1); /* error */
}
seg = (physical >> 24);
off = (physical & 0xffffffL);
switch (seg)
{
case 0x10: /* dst is a 15 bit offset into the on-chip memory */
*dmap = 0;
*addr = (long *) (0x0000 + ((short)off & 0x7fff));
break;
case 0x11: /* dst is an 18-bit offset into the on-chip
instruction memory */
*dmap = 0x1000L | ((off & 0x3ffffL) >> 14);
*addr = (long *) (0x8000 + ((short)off & 0x3fff));
break;
case 0x12: /* dst is a 24-bit offset into unified memory */
*dmap = off >> 14;
*addr = (long *) (0x8000 + ((short)off & 0x3fff));
break;
default:
exit (-1); /* error */
}
}
#endif /* __D10V__ */
static void
ovly_copy (unsigned long dst, unsigned long src, long size)
{
#ifdef __M32R__
memcpy ((void *) dst, (void *) src, size);
return;
#endif /* M32R */
#ifdef __D10V__
unsigned long *s, *d, tmp;
short dmap_src, dmap_dst;
short dmap_save;
/* all section sizes should by multiples of 4 bytes */
dmap_save = DMAP;
D10VTranslate (src, &dmap_src, &s);
D10VTranslate (dst, &dmap_dst, &d);
while (size > 0)
{
/* NB: Transfer 4 byte (long) quantites, problems occure
when only two bytes are transfered */
DMAP = dmap_src;
tmp = *s;
DMAP = dmap_dst;
*d = tmp;
d++;
s++;
size -= sizeof (tmp);
src += sizeof (tmp);
dst += sizeof (tmp);
if ((src & 0x3fff) == 0)
D10VTranslate (src, &dmap_src, &s);
if ((dst & 0x3fff) == 0)
D10VTranslate (dst, &dmap_dst, &d);
}
DMAP = dmap_save;
#endif /* D10V */
}