old-cross-binutils/gdb/i386-nat.c
Michael Snyder c9e030cfcd 2001-04-17 Michael Snyder <msnyder@redhat.com>
* i386-nat.c: Fix typo in comment.
2001-04-18 00:37:49 +00:00

618 lines
20 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Intel x86 (a.k.a. ia32) native-dependent code.
Copyright (C) 2001 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "breakpoint.h"
#include "command.h"
#include "gdbcmd.h"
/* Support for hardware watchpoints and breakpoints using the x86
debug registers.
This provides several functions for inserting and removing
hardware-assisted breakpoints and watchpoints, testing if
one or more of the watchpoints triggered and at what address,
checking whether a given region can be watched, etc.
A target which wants to use these functions should define
several macros, such as `target_insert_watchpoint' and
`target_stopped_data_address', listed in target.h, to call
the appropriate functions below. It should also define
I386_USE_GENERIC_WATCHPOINTS in its tm.h file.
In addition, each target should provide several low-level
macros that will be called to insert watchpoints and hardware
breakpoints into the inferior, remove them, and check their
status. These macros are:
I386_DR_LOW_SET_CONTROL -- set the debug control (DR7)
register to a given value
I386_DR_LOW_SET_ADDR -- put an address into one debug
register
I386_DR_LOW_RESET_ADDR -- reset the address stored in
one debug register
I386_DR_LOW_GET_STATUS -- return the value of the debug
status (DR6) register.
The functions below implement debug registers sharing by
reference counts, and allow to watch regions up to 16 bytes
long. */
#ifdef I386_USE_GENERIC_WATCHPOINTS
/* Debug registers' indices. */
#define DR_NADDR 4 /* the number of debug address registers */
#define DR_STATUS 6 /* index of debug status register (DR6) */
#define DR_CONTROL 7 /* index of debug control register (DR7) */
/* DR7 Debug Control register fields. */
/* How many bits to skip in DR7 to get to R/W and LEN fields. */
#define DR_CONTROL_SHIFT 16
/* How many bits in DR7 per R/W and LEN field for each watchpoint. */
#define DR_CONTROL_SIZE 4
/* Watchpoint/breakpoint read/write fields in DR7. */
#define DR_RW_EXECUTE (0x0) /* break on instruction execution */
#define DR_RW_WRITE (0x1) /* break on data writes */
#define DR_RW_READ (0x3) /* break on data reads or writes */
/* This is here for completeness. No platform supports this
functionality yet (as of Mar-2001). Note that the DE flag in the
CR4 register needs to be set to support this. */
#ifndef DR_RW_IORW
#define DR_RW_IORW (0x2) /* break on I/O reads or writes */
#endif
/* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
is so we could OR this with the read/write field defined above. */
#define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpt */
#define DR_LEN_2 (0x1 << 2) /* 2-byte region watch */
#define DR_LEN_4 (0x3 << 2) /* 4-byte region watch */
/* Local and Global Enable flags in DR7.
When the Local Enable flag is set, the breakpoint/watchpoint is
enabled only for the current task; the processor automatically
clears this flag on every task switch. When the Global Enable
flag is set, the breakpoint/watchpoint is enabled for all tasks;
the processor never clears this flag.
Currently, all watchpoint are locally enabled. If you need to
enable them globally, read the comment which pertains to this in
i386_insert_aligned_watchpoint below. */
#define DR_LOCAL_ENABLE_SHIFT 0 /* extra shift to the local enable bit */
#define DR_GLOBAL_ENABLE_SHIFT 1 /* extra shift to the global enable bit */
#define DR_ENABLE_SIZE 2 /* 2 enable bits per debug register */
/* Local and global exact breakpoint enable flags (a.k.a. slowdown
flags). These are only required on i386, to allow detection of the
exact instruction which caused a watchpoint to break; i486 and
later processors do that automatically. We set these flags for
back compatibility. */
#define DR_LOCAL_SLOWDOWN (0x100)
#define DR_GLOBAL_SLOWDOWN (0x200)
/* Fields reserved by Intel. This includes the GD (General Detect
Enable) flag, which causes a debug exception to be generated when a
MOV instruction accesses one of the debug registers.
FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
#define DR_CONTROL_RESERVED (0xFC00)
/* Auxiliary helper macros. */
/* A value that masks all fields in DR7 that are reserved by Intel. */
#define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
/* The I'th debug register is vacant if its Local and Global Enable
bits are reset in the Debug Control register. */
#define I386_DR_VACANT(i) \
((dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
/* Locally enable the break/watchpoint in the I'th debug register. */
#define I386_DR_LOCAL_ENABLE(i) \
dr_control_mirror |= (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))
/* Globally enable the break/watchpoint in the I'th debug register. */
#define I386_DR_GLOBAL_ENABLE(i) \
dr_control_mirror |= (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))
/* Disable the break/watchpoint in the I'th debug register. */
#define I386_DR_DISABLE(i) \
dr_control_mirror &= ~(3 << (DR_ENABLE_SIZE * (i)))
/* Set in DR7 the RW and LEN fields for the I'th debug register. */
#define I386_DR_SET_RW_LEN(i,rwlen) \
do { \
dr_control_mirror &= ~(0x0f << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i))); \
dr_control_mirror |= ((rwlen) << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i))); \
} while (0)
/* Get from DR7 the RW and LEN fields for the I'th debug register. */
#define I386_DR_GET_RW_LEN(i) \
((dr_control_mirror >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
/* Did the watchpoint whose address is in the I'th register break? */
#define I386_DR_WATCH_HIT(i) (dr_status_mirror & (1 << (i)))
/* A macro to loop over all debug registers. */
#define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
/* Mirror the inferior's DRi registers. We keep the status and
control registers separated because they don't hold addresses. */
static CORE_ADDR dr_mirror[DR_NADDR];
static unsigned dr_status_mirror, dr_control_mirror;
/* Reference counts for each debug register. */
static int dr_ref_count[DR_NADDR];
/* Whether or not to print the mirrored debug registers. */
static int maint_show_dr;
/* Types of operations supported by i386_handle_nonaligned_watchpoint. */
typedef enum { WP_INSERT, WP_REMOVE, WP_COUNT } i386_wp_op_t;
/* Internal functions. */
/* Return the value of a 4-bit field for DR7 suitable for watching a
region of LEN bytes for accesses of type TYPE. LEN is assumed
to have the value of 1, 2, or 4. */
static unsigned i386_length_and_rw_bits (int len, enum target_hw_bp_type type);
/* Insert a watchpoint at address ADDR, which is assumed to be aligned
according to the length of the region to watch. LEN_RW_BITS is the
value of the bit-field from DR7 which describes the length and
access type of the region to be watched by this watchpoint. Return
0 on success, -1 on failure. */
static int i386_insert_aligned_watchpoint (CORE_ADDR addr,
unsigned len_rw_bits);
/* Remove a watchpoint at address ADDR, which is assumed to be aligned
according to the length of the region to watch. LEN_RW_BITS is the
value of the bits from DR7 which describes the length and access
type of the region watched by this watchpoint. Return 0 on
success, -1 on failure. */
static int i386_remove_aligned_watchpoint (CORE_ADDR addr,
unsigned len_rw_bits);
/* Insert or remove a (possibly non-aligned) watchpoint, or count the
number of debug registers required to watch a region at address
ADDR whose length is LEN for accesses of type TYPE. Return 0 on
successful insertion or removal, a positive number when queried
about the number of registers, or -1 on failure. If WHAT is not
a valid value, bombs through internal_error. */
static int i386_handle_nonaligned_watchpoint (i386_wp_op_t what,
CORE_ADDR addr, int len,
enum target_hw_bp_type type);
/* Implementation. */
/* Clear the reference counts and forget everything we knew about
the debug registers. */
void
i386_cleanup_dregs (void)
{
int i;
ALL_DEBUG_REGISTERS(i)
{
dr_mirror[i] = 0;
dr_ref_count[i] = 0;
}
dr_control_mirror = 0;
dr_status_mirror = 0;
}
/* Print the values of the mirrored debug registers.
This is called when maint_show_dr is non-zero. To set that
up, type "maint show-debug-regs" at GDB's prompt. */
static void
i386_show_dr (const char *func, CORE_ADDR addr,
int len, enum target_hw_bp_type type)
{
int i;
puts_unfiltered (func);
if (addr || len)
printf_unfiltered (" (addr=%lx, len=%d, type=%s)",
/* This code is for ia32, so casting CORE_ADDR
to unsigned long should be okay. */
(unsigned long)addr, len,
type == hw_write ? "data-write"
: (type == hw_read ? "data-read"
: (type == hw_access ? "data-read/write"
: (type == hw_execute ? "instruction-execute"
/* FIXME: if/when I/O read/write
watchpoints are supported, add them
here. */
: "??unknown??"))));
puts_unfiltered (":\n");
printf_unfiltered ("\tCONTROL (DR7): %08x STATUS (DR6): %08x\n",
dr_control_mirror, dr_status_mirror);
ALL_DEBUG_REGISTERS(i)
{
printf_unfiltered ("\tDR%d: addr=%08lx, ref.count=%d DR%d: addr=%08lx, ref.count=%d\n",
i, dr_mirror[i], dr_ref_count[i],
i+1, dr_mirror[i+1], dr_ref_count[i+1]);
i++;
}
}
/* Return the value of a 4-bit field for DR7 suitable for watching a
region of LEN bytes for accesses of type TYPE. LEN is assumed
to have the value of 1, 2, or 4. */
static unsigned
i386_length_and_rw_bits (int len, enum target_hw_bp_type type)
{
unsigned rw;
switch (type)
{
case hw_execute:
rw = DR_RW_EXECUTE;
break;
case hw_write:
rw = DR_RW_WRITE;
break;
case hw_read: /* x86 doesn't support data-read watchpoints */
case hw_access:
rw = DR_RW_READ;
break;
#if 0
case hw_io_access: /* not yet supported */
rw = DR_RW_IORW;
break;
#endif
default:
internal_error (__FILE__, __LINE__, "\
Invalid hw breakpoint type %d in i386_length_and_rw_bits.\n", (int)type);
}
switch (len)
{
case 4:
return (DR_LEN_4 | rw);
case 2:
return (DR_LEN_2 | rw);
case 1:
return (DR_LEN_1 | rw);
default:
internal_error (__FILE__, __LINE__, "\
Invalid hw breakpoint length %d in i386_length_and_rw_bits.\n", len);
}
}
/* Insert a watchpoint at address ADDR, which is assumed to be aligned
according to the length of the region to watch. LEN_RW_BITS is the
value of the bits from DR7 which describes the length and access
type of the region to be watched by this watchpoint. Return 0 on
success, -1 on failure. */
static int
i386_insert_aligned_watchpoint (CORE_ADDR addr, unsigned len_rw_bits)
{
int i;
/* First, look for an occupied debug register with the same address
and the same RW and LEN definitions. If we find one, we can
reuse it for this watchpoint as well (and save a register). */
ALL_DEBUG_REGISTERS(i)
{
if (!I386_DR_VACANT (i)
&& dr_mirror[i] == addr
&& I386_DR_GET_RW_LEN (i) == len_rw_bits)
{
dr_ref_count[i]++;
return 0;
}
}
/* Next, look for a vacant debug register. */
ALL_DEBUG_REGISTERS(i)
{
if (I386_DR_VACANT (i))
break;
}
/* No more debug registers! */
if (i >= DR_NADDR)
return -1;
/* Now set up the register I to watch our region. */
/* Record the info in our local mirrored array. */
dr_mirror[i] = addr;
dr_ref_count[i] = 1;
I386_DR_SET_RW_LEN (i, len_rw_bits);
/* Note: we only enable the watchpoint locally, i.e. in the current
task. Currently, no x86 target allows or supports global
watchpoints; however, if any target would want that in the
future, GDB should probably provide a command to control whether
to enable watchpoints globally or locally, and the code below
should use global or local enable and slow-down flags as
appropriate. */
I386_DR_LOCAL_ENABLE (i);
dr_control_mirror |= DR_LOCAL_SLOWDOWN;
dr_control_mirror &= I386_DR_CONTROL_MASK;
/* Finally, actually pass the info to the inferior. */
I386_DR_LOW_SET_ADDR (i, addr);
I386_DR_LOW_SET_CONTROL (dr_control_mirror);
return 0;
}
/* Remove a watchpoint at address ADDR, which is assumed to be aligned
according to the length of the region to watch. LEN_RW_BITS is the
value of the bits from DR7 which describes the length and access
type of the region watched by this watchpoint. Return 0 on
success, -1 on failure. */
static int
i386_remove_aligned_watchpoint (CORE_ADDR addr, unsigned len_rw_bits)
{
int i, retval = -1;
ALL_DEBUG_REGISTERS(i)
{
if (!I386_DR_VACANT (i)
&& dr_mirror[i] == addr
&& I386_DR_GET_RW_LEN (i) == len_rw_bits)
{
if (--dr_ref_count[i] == 0) /* no longer in use? */
{
/* Reset our mirror. */
dr_mirror[i] = 0;
I386_DR_DISABLE (i);
/* Reset it in the inferior. */
I386_DR_LOW_SET_CONTROL (dr_control_mirror);
I386_DR_LOW_RESET_ADDR (i);
}
retval = 0;
}
}
return retval;
}
/* Insert or remove a (possibly non-aligned) watchpoint, or count the
number of debug registers required to watch a region at address
ADDR whose length is LEN for accesses of type TYPE. Return 0 on
successful insertion or removal, a positive number when queried
about the number of registers, or -1 on failure. If WHAT is not
a valid value, bombs through internal_error. */
static int
i386_handle_nonaligned_watchpoint (i386_wp_op_t what, CORE_ADDR addr, int len,
enum target_hw_bp_type type)
{
int align;
int size;
int rv = 0, status = 0;
static int size_try_array[4][4] =
{
{ 1, 1, 1, 1 }, /* trying size one */
{ 2, 1, 2, 1 }, /* trying size two */
{ 2, 1, 2, 1 }, /* trying size three */
{ 4, 1, 2, 1 } /* trying size four */
};
while (len > 0)
{
align = addr % 4;
/* Four is the maximum length an x86 debug register can watch. */
size = size_try_array[len > 4 ? 3 : len - 1][align];
if (what == WP_COUNT)
/* size_try_array[] is defined so that each iteration through
the loop is guaranteed to produce an address and a size
that can be watched with a single debug register. Thus,
for counting the registers required to watch a region, we
simply need to increment the count on each iteration. */
rv++;
else
{
unsigned len_rw = i386_length_and_rw_bits (size, type);
if (what == WP_INSERT)
status = i386_insert_aligned_watchpoint (addr, len_rw);
else if (what == WP_REMOVE)
status = i386_remove_aligned_watchpoint (addr, len_rw);
else
internal_error (__FILE__, __LINE__, "\
Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n",
(int)what);
/* We keep the loop going even after a failure, because some
of the other aligned watchpoints might still succeed
(e.g. if they watch addresses that are already watched,
in which case we just increment the reference counts of
occupied debug registers). If we break out of the loop
too early, we could cause those addresses watched by
other watchpoints to be disabled when breakpoint.c reacts
to our failure to insert this watchpoint and tries to
remove it. */
if (status)
rv = status;
}
addr += size;
len -= size;
}
return rv;
}
/* Insert a watchpoint to watch a memory region which starts at
address ADDR and whose length is LEN bytes. Watch memory accesses
of the type TYPE. Return 0 on success, -1 on failure. */
int
i386_insert_watchpoint (CORE_ADDR addr, int len, int type)
{
int retval;
if (len == 3 || len > 4 || addr % len != 0)
retval = i386_handle_nonaligned_watchpoint (WP_INSERT, addr, len, type);
else
{
unsigned len_rw = i386_length_and_rw_bits (len, type);
retval = i386_insert_aligned_watchpoint (addr, len_rw);
}
if (maint_show_dr)
i386_show_dr ("insert_watchpoint", addr, len, type);
return retval;
}
/* Remove a watchpoint that watched the memory region which starts at
address ADDR, whose length is LEN bytes, and for accesses of the
type TYPE. Return 0 on success, -1 on failure. */
int
i386_remove_watchpoint (CORE_ADDR addr, int len, int type)
{
int retval;
if (len == 3 || len > 4 || addr % len != 0)
retval = i386_handle_nonaligned_watchpoint (WP_REMOVE, addr, len, type);
else
{
unsigned len_rw = i386_length_and_rw_bits (len, type);
retval = i386_remove_aligned_watchpoint (addr, len_rw);
}
if (maint_show_dr)
i386_show_dr ("remove_watchpoint", addr, len, type);
return retval;
}
/* Return non-zero if we can watch a memory region that starts at
address ADDR and whose length is LEN bytes. */
int
i386_region_ok_for_watchpoint (CORE_ADDR addr, int len)
{
/* Compute how many aligned watchpoints we would need to cover this
region. */
int nregs = i386_handle_nonaligned_watchpoint (WP_COUNT, addr, len,
hw_write);
return nregs <= DR_NADDR ? 1 : 0;
}
/* If the inferior has some watchpoint that triggered, return the
address associated with that watchpoint. Otherwise, return
zero. */
CORE_ADDR
i386_stopped_data_address (void)
{
int i;
CORE_ADDR ret = 0;
dr_status_mirror = I386_DR_LOW_GET_STATUS ();
ALL_DEBUG_REGISTERS(i)
{
if (I386_DR_WATCH_HIT (i)
/* This second condition makes sure DRi is set up for a data
watchpoint, not a hardware breakpoint. The reason is
that GDB doesn't call the target_stopped_data_address
method except for data watchpoints. In other words, I'm
being paranoiac. */
&& I386_DR_GET_RW_LEN (i) != 0)
{
ret = dr_mirror[i];
if (maint_show_dr)
i386_show_dr ("watchpoint_hit", ret, -1, hw_write);
}
}
if (maint_show_dr && ret == 0)
i386_show_dr ("stopped_data_addr", 0, 0, hw_write);
return ret;
}
/* Return non-zero if the inferior has some break/watchpoint that
triggered. */
int
i386_stopped_by_hwbp (void)
{
int i;
dr_status_mirror = I386_DR_LOW_GET_STATUS ();
if (maint_show_dr)
i386_show_dr ("stopped_by_hwbp", 0, 0, hw_execute);
ALL_DEBUG_REGISTERS(i)
{
if (I386_DR_WATCH_HIT (i))
return 1;
}
return 0;
}
/* Insert a hardware-assisted breakpoint at address ADDR. SHADOW is
unused. Return 0 on success, EBUSY on failure. */
int
i386_insert_hw_breakpoint (CORE_ADDR addr, void *shadow)
{
unsigned len_rw = i386_length_and_rw_bits (1, hw_execute);
int retval = i386_insert_aligned_watchpoint (addr, len_rw) ? EBUSY : 0;
if (maint_show_dr)
i386_show_dr ("insert_hwbp", addr, 1, hw_execute);
return retval;
}
/* Remove a hardware-assisted breakpoint at address ADDR. SHADOW is
unused. Return 0 on success, -1 on failure. */
int
i386_remove_hw_breakpoint (CORE_ADDR addr, void *shadow)
{
unsigned len_rw = i386_length_and_rw_bits (1, hw_execute);
int retval = i386_remove_aligned_watchpoint (addr, len_rw);
if (maint_show_dr)
i386_show_dr ("remove_hwbp", addr, 1, hw_execute);
return retval;
}
#endif /* I386_USE_GENERIC_WATCHPOINTS */
void
_initialize_i386_nat (void)
{
#ifdef I386_USE_GENERIC_WATCHPOINTS
/* A maintenance command to enable printing the internal DRi mirror
variables. */
add_set_cmd ("show-debug-regs", class_maintenance,
var_boolean, (char *) &maint_show_dr,
"\
Set whether to show variables that mirror the x86 debug registers.\n\
Use \"on\" to enable, \"off\" to disable.\n\
If enabled, the debug registers values are shown when GDB inserts\n\
or removes a hardware breakpoint or watchpoint, and when the inferior\n\
triggers a breakpoint or watchpoint.", &maintenancelist);
#endif
}