darkkirb/old-cross-binutils
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
old-cross-binutils/sim/bfin/ChangeLog
Mike Frysinger 1f20b1457b sim: bfin: set ASTAT AV/AVS when shifting accumulators overflow 
The LSHIFT/ASHIFT insns that work with accumulators lacked AV/AVS
handling in the ASTAT register, so add it to match the hardware.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-18 22:03:10 +00:00

473 lines
19 KiB
Text
Raw Blame History

2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and
ASHIFT accumulator insns.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
(lshiftrt): Likewise.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
rather than get_extended_acc in LSHIFT insns.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
Check MM once when mmod is M_FU to match M_TFU better.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
32, perform a left shift. Update the corresponding AV bit. Set
AZ when the low 32bits are also zero.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
call lshift only when count is positive. Otherwise, call ashiftrt.
With arithmetic right shift insns, call ashiftrt when the value is
small enough, otherwise call lshift.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (extract_mult): Call saturate_s16 directly when
mmod is M_IH rather than computing the result by hand.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
before saturation, set sat when more cases saturate, and set the
overflow bit based on these results. For M_TFU, M_IU, M_FU, and
M_W32, change the max values compared against.
(decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1
when processing MAC1 and pass v_0 when processing MAC0. Combine
the results into the V/VS ASTAT bits.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
and mmod is M_IU. Call saturate_s16 when MM is set and mmod
is M_TFU.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
allow MM to sign extend all the time.
(decode_macfunc): Likewise. Drop sign extension of unsigned
values.
2011-06-18 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
(decode_macfunc): Likewise when mmod is M_IH.
2011-06-18 Mike Frysinger <vapier@gentoo.org>
* interp.c (sim_create_inferior): Change free to freeargv.
2011-06-04 Mike Frysinger <vapier@gentoo.org>
* machs.c (bf534_dev, bf537_dev): Add glue-or devices.
(bf537_port): Define applicable devices with PORT to the glue-or
devices instead of SIC.
(bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
Only parse reg/type when the device has an address. Move the call
to dv_bfin_hw_port_parse up before slash check.
2011-06-04 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
BFIN_SIC_TO_CEC_PORTS definition.
(SIC_PORTS): New define.
(bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
Delete old layouts.
(bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
bfin_sic_561_ports): Define new layouts with SIC_PORTS().
(bfin_sic_finish): Change reference to bfin_sic_50x_ports,
bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
to bfin_sic2_ports. Change reference to bfin_sic_533_ports,
bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
* machs.c (bfin_port_layout): New structure.
(bfin_model_data): Add new "port" and "port_count" members.
(PORT, SIC): New defines.
(bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
Move and redefine port layout from dv-bfin_sic.c to here.
(bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
bf548_port, bf549_port): New defines.
(bfin_model_data): Link in new bfin_port_layout.port member.
(dv_bfin_hw_port_parse): New function.
(dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
(bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
bfin_sic links with new dv_bfin_hw_port_parse function.
2011-06-03 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
2011-05-25 Mike Frysinger <vapier@gentoo.org>
* sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
2011-05-25 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
* dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
* dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
* dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
* dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
* dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
* dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
* dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
* dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
* dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
* dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
* dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
* dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
* dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
* dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
* dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
* dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
* dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
* dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
* dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
* dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
* dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
* dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
* dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
* dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
* dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
* dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
* dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
* machs.h: ... here.
* machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
2011-05-25 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (dv-bfin_pfmon.o): New target.
* configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
* configure: Regenerated.
* dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
* machs.c: Add include new bfin_pfmon.h.
(bfin_core_dev): Add pfmon.
2011-05-25 Mike Frysinger <vapier@gentoo.org>
* machs.c (bf526_roms): Add a region with rev of 2.
(bf54x_roms): Add regions with rev of 4.
* bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
bf54x_l1-0.4.h headers.
* bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
New header files.
2011-05-14 Mike Frysinger <vapier@gentoo.org>
* bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
check for SP reg.
2011-05-14 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a
local uart. When LOOP_ENA is set in mcr, write to the saved byte
and count fields of the uart.
(bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
and bfin_uart_get_next_byte.
(bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count
check first, and skip the remaining code when LOOP_ENA is set in mcr.
* dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
(bfin_uart_get_next_byte): Likewise.
(XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
* dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
calling bfin_uart_write_byte and bfin_uart_get_next_byte.
2011-05-09 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
from uart->lsr before setting them.
2011-04-27 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
(bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
Likewise.
2011-04-26 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
(bfin_gpio_io_write_buffer): Store the current port state into
"data", and call bfin_gpio_forward_ouput when the data or dir
MMRs are updated.
(bfin_gpio_ports): Change p0..p15 to bidirect_port.
2011-04-26 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
(bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
(bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
mask a or mask b MMRs are written.
(bfin_gpio_port_event): When handling edge gpios, set the bit in
int_state, call bfin_gpio_forward_ints, and then clear the bit.
When handling level gpios, clear/set the bit in int_state rather
than returning immediately. Call bfin_gpio_forward_ints instead
of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
2011-04-16 Mike Frysinger <vapier@gentoo.org>
* bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
BYTEUNPACK.
(decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
2011-04-14 Mike Frysinger <vapier@gentoo.org>
* bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
and BYTEUNPACK insns.
2011-04-11 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_sic.c (bfin_sic_port_event): New helper function.
(bfin_sic_52x_port_event, bfin_sic_537_port_event,
bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
in the trace output, and call the new bfin_sic_port_event func.
2011-04-11 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
2011-04-01 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_otp.c (bfin_otp_ports): Declare.
(bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
2011-03-29 Mike Frysinger <vapier@gentoo.org>
* configure: Regenerate after common/aclocal.m4 changes.
2011-03-28 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
and add to casted low 16bits of A0.L and store in val0. Cast high
16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
store in val1. Delete bit checks of val0 and val1.
2011-03-26 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
the result was 0x80000000 for RND12 subtraction.
2011-03-26 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
2011-03-24 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
major code flow point.
* dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
before calling hw_port_event on ourselves.
(bfin_sic_52x_port_event, bfin_sic_537_port_event,
bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
at the start of the function.
2011-03-24 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
Normalize "level" to 0/1 values. Shift "level" over by "my_port".
Invert port->both bit check.
2011-03-24 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* TODO: Document some known SIC issues.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
* dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
* dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
* dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
* dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
* dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
* dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
2011-03-23 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
value for the VIT_MAX insn, and mask off the result when done.
2011-03-23 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
and set A0 to a0_lo when up_lo is false.
2011-03-23 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
saturate_s40, and use the v parameter to update the AV bit. Set the
AC bit only when the final result is 0.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
(bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
Encode ids with the ENC macro.
(bfin_sic_52x_port_event, bfin_sic_537_port_event,
bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
(bfin_sic_533_port_event): Delete.
(bfin_sic_finish): Call set_hw_port_event with
bfin_sic_537_port_event for BF533 and BF59x targets.
2011-03-23 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
2011-03-23 Mike Frysinger <vapier@gentoo.org>
* machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
Change bfin_gpio addresses from f/g/h to 5/6/7.
(bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
2011-03-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
* configure: Regenerate.
* config.in: Regenerate.
* interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
kill or pread.
2011-03-15 Mike Frysinger <vapier@gentoo.org>
* Makefile.in (dv-bfin_gpio.o): New target.
* configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
* configure: Regenerate.
* dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
* machs.c: Include dv-bfin_gpio.h.
(bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
Delete GPIO memory stubs.
(bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
peripheral devices.
(bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
2011-03-15 Mike Frysinger <vapier@gentoo.org>
* bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
2011-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
and subs.
2011-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
2011-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_macfunc): New neg parameter. Set when the
high bit is set after extract_mult.
(decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc
functions. Use these to update the AN bit.
2011-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to
the extract_mult functions. Include these when updating the V, VS,
and V_COPY bits.
2011-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (astat_names): New global bit array.
(decode_CC2stat_0): Delete local astat_name and astat_names.
(decode_psedodbg_assert_0): Move hardcoded offset into a variable.
Print out ASTAT bit values when checking an ASTAT register.
2010-03-15 Robin Getz <robin.getz@analog.com>
* bfin-sim.c (extract_mult): Handle M_IU.
2011-03-05 Mike Frysinger <vapier@gentoo.org>
* Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
tconfig.in: New Blackfin port.
Reference in a new issue View git blame Copy permalink