old-cross-binutils/gdb/config/sparc/tm-sp64.h
Bob Manson 1e9c814fb9 * config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
%o0-%o5 as 64-bit values; compensate for stack bias.
	(USE_STRUCT_CONVENTION): We only pass pointers to structs
	if they're larger than 32 bytes.
	(REG_STRUCT_HAS_ADDR): Ditto.

	* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
 	instead of read_register. If the target is a sparc64 and the frame
 	pointer is odd, compensate for the stack bias.
	(get_saved_register): Use read_sp().
	(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
	(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
 	save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
	(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
 	CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
 	dummy frame.
	(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
 	the FP is odd, compensate for stack bias.
	(sparc_store_return_value): Right-justify the return value before
 	writing it to %o0.
	(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
 	sparc64.
	(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
 	sparc64_write_fp, sp64_push_arguments,
 	sparc64_extract_return_value): New functions to support the
 	sparc64 ABI.

	* dwarfread.c (handle_producer): Set processing_gcc_compilation to
 	the right version number.

	* dwarf2read.c (read_file_scope): Assume we're processing
	GCC2 output.
1998-05-08 05:30:24 +00:00

394 lines
14 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Target machine sub-parameters for SPARC64, for GDB, the GNU debugger.
This is included by other tm-*.h files to define SPARC64 cpu-related info.
Copyright 1994, 1995, 1996, 1998 Free Software Foundation, Inc.
This is (obviously) based on the SPARC Vn (n<9) port.
Contributed by Doug Evans (dje@cygnus.com).
Further modified by Bob Manson (manson@cygnus.com).
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#define GDB_TARGET_IS_SPARC64
#ifdef __STDC__
struct value;
#endif
/* Eeeew. Ok, we have to assume (for now) that the processor really is
in sparc64 mode. While this is the same instruction sequence as
on the Sparc, the stack frames are offset by +2047 (and the arguments
are 8 bytes instead of 4). */
/* Instructions are:
std %f10, [ %fp + 0x7a7 ]
std %f8, [ %fp + 0x79f ]
std %f6, [ %fp + 0x797 ]
std %f4, [ %fp + 0x78f ]
std %f2, [ %fp + 0x787 ]
std %f0, [ %fp + 0x77f ]
std %g6, [ %fp + 0x777 ]
std %g4, [ %fp + 0x76f ]
std %g2, [ %fp + 0x767 ]
std %g0, [ %fp + 0x75f ]
std %fp, [ %fp + 0x757 ]
std %i4, [ %fp + 0x74f ]
std %i2, [ %fp + 0x747 ]
std %i0, [ %fp + 0x73f ]
nop
nop
nop
nop
rd %tbr, %o0
st %o0, [ %fp + 0x72b ]
rd %tpc, %o0
st %o0, [ %fp + 0x727 ]
rd %psr, %o0
st %o0, [ %fp + 0x723 ]
rd %y, %o0
st %o0, [ %fp + 0x71f ]
ldx [ %sp + 0x8a7 ], %o5
ldx [ %sp + 0x89f ], %o4
ldx [ %sp + 0x897 ], %o3
ldx [ %sp + 0x88f ], %o2
ldx [ %sp + 0x887 ], %o1
call %g0
ldx [ %sp + 0x87f ], %o0
nop
ta 1
nop
nop
*/
#define CALL_DUMMY { 0x9de3bec0fd3fa7f7LL, 0xf93fa7eff53fa7e7LL,\
0xf13fa7dfed3fa7d7LL, 0xe93fa7cfe53fa7c7LL,\
0xe13fa7bfdd3fa7b7LL, 0xd93fa7afd53fa7a7LL,\
0xd13fa79fcd3fa797LL, 0xc93fa78fc53fa787LL,\
0xc13fa77fcc3fa777LL, 0xc83fa76fc43fa767LL,\
0xc03fa75ffc3fa757LL, 0xf83fa74ff43fa747LL,\
0xf03fa73f01000000LL, 0x0100000001000000LL,\
0x0100000091580000LL, 0xd027a72b93500000LL,\
0xd027a72791480000LL, 0xd027a72391400000LL,\
0xd027a71fda5ba8a7LL, 0xd85ba89fd65ba897LL,\
0xd45ba88fd25ba887LL, 0x9fc02000d05ba87fLL,\
0x0100000091d02001LL, 0x0100000001000000LL }
/* 128 is to reserve space to write the %i/%l registers that will be restored
when we resume. */
#define CALL_DUMMY_STACK_ADJUST 128
#define CALL_DUMMY_LENGTH 192
#define CALL_DUMMY_START_OFFSET 148
#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + (5 * 4))
#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + (8 * 4))
#include "sparc/tm-sparc.h"
/* Stack must be aligned on 128-bit boundaries when synthesizing
function calls. */
#undef STACK_ALIGN
#define STACK_ALIGN(ADDR) (((ADDR) + 15 ) & -16)
/* Number of machine registers. */
#undef NUM_REGS
#define NUM_REGS 125
/* Initializer for an array of names of registers.
There should be NUM_REGS strings in this initializer. */
/* Some of these registers are only accessible from priviledged mode.
They are here for kernel debuggers, etc. */
/* FIXME: icc and xcc are currently considered separate registers.
This may have to change and consider them as just one (ccr).
Let's postpone this as long as we can. It's nice to be able to set
them individually. */
/* FIXME: fcc0-3 are currently separate, even though they are also part of
fsr. May have to remove them but let's postpone this as long as
possible. It's nice to be able to set them individually. */
/* FIXME: Whether to include f33, f35, etc. here is not clear.
There are advantages and disadvantages. */
#undef REGISTER_NAMES
#define REGISTER_NAMES \
{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \
"o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \
"l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \
"i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \
\
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \
"f32", "f34", "f36", "f38", "f40", "f42", "f44", "f46", \
"f48", "f50", "f52", "f54", "f56", "f58", "f60", "f62", \
\
"pc", "npc", "ccr", "fsr", "fprs", "y", "asi", \
"ver", "tick", "pil", "pstate", \
"tstate", "tba", "tl", "tt", "tpc", "tnpc", "wstate", \
"cwp", "cansave", "canrestore", "cleanwin", "otherwin", \
"asr16", "asr17", "asr18", "asr19", "asr20", "asr21", \
"asr22", "asr23", "asr24", "asr25", "asr26", "asr27", \
"asr28", "asr29", "asr30", "asr31", \
/* These are here at the end to simplify removing them if we have to. */ \
"icc", "xcc", "fcc0", "fcc1", "fcc2", "fcc3" \
}
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
and correspond to the general registers of the machine,
and some are "phony" register numbers which are too large
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
#if 0 /* defined in tm-sparc.h, replicated for doc purposes */
#define G0_REGNUM 0 /* %g0 */
#define G1_REGNUM 1 /* %g1 */
#define O0_REGNUM 8 /* %o0 */
#define SP_REGNUM 14 /* Contains address of top of stack, \
which is also the bottom of the frame. */
#define RP_REGNUM 15 /* Contains return address value, *before* \
any windows get switched. */
#define O7_REGNUM 15 /* Last local reg not saved on stack frame */
#define L0_REGNUM 16 /* First local reg that's saved on stack frame
rather than in machine registers */
#define I0_REGNUM 24 /* %i0 */
#define FP_REGNUM 30 /* Contains address of executing stack frame */
#define I7_REGNUM 31 /* Last local reg saved on stack frame */
#define FP0_REGNUM 32 /* Floating point register 0 */
#endif
#define FP_MAX_REGNUM 80 /* 1 + last fp reg number */
/* #undef v8 misc. regs */
#undef Y_REGNUM
#undef PS_REGNUM
#undef WIM_REGNUM
#undef TBR_REGNUM
#undef PC_REGNUM
#undef NPC_REGNUM
#undef FPS_REGNUM
#undef CPS_REGNUM
/* v9 misc. and priv. regs */
#define C0_REGNUM FP_MAX_REGNUM /* Start of control registers */
#define PC_REGNUM (C0_REGNUM + 0) /* Current PC */
#define NPC_REGNUM (C0_REGNUM + 1) /* Next PC */
#define CCR_REGNUM (C0_REGNUM + 2) /* Condition Code Register (%xcc,%icc) */
#define FSR_REGNUM (C0_REGNUM + 3) /* Floating Point State */
#define FPRS_REGNUM (C0_REGNUM + 4) /* Floating Point Registers State */
#define Y_REGNUM (C0_REGNUM + 5) /* Temp register for multiplication, etc. */
#define ASI_REGNUM (C0_REGNUM + 6) /* Alternate Space Identifier */
#define VER_REGNUM (C0_REGNUM + 7) /* Version register */
#define TICK_REGNUM (C0_REGNUM + 8) /* Tick register */
#define PIL_REGNUM (C0_REGNUM + 9) /* Processor Interrupt Level */
#define PSTATE_REGNUM (C0_REGNUM + 10) /* Processor State */
#define TSTATE_REGNUM (C0_REGNUM + 11) /* Trap State */
#define TBA_REGNUM (C0_REGNUM + 12) /* Trap Base Address */
#define TL_REGNUM (C0_REGNUM + 13) /* Trap Level */
#define TT_REGNUM (C0_REGNUM + 14) /* Trap Type */
#define TPC_REGNUM (C0_REGNUM + 15) /* Trap pc */
#define TNPC_REGNUM (C0_REGNUM + 16) /* Trap npc */
#define WSTATE_REGNUM (C0_REGNUM + 17) /* Window State */
#define CWP_REGNUM (C0_REGNUM + 18) /* Current Window Pointer */
#define CANSAVE_REGNUM (C0_REGNUM + 19) /* Savable Windows */
#define CANRESTORE_REGNUM (C0_REGNUM + 20) /* Restorable Windows */
#define CLEANWIN_REGNUM (C0_REGNUM + 21) /* Clean Windows */
#define OTHERWIN_REGNUM (C0_REGNUM + 22) /* Other Windows */
#define ASR_REGNUM(n) (C0_REGNUM+(23-16)+(n)) /* Ancillary State Register
(n = 16...31) */
#define ICC_REGNUM (C0_REGNUM + 39) /* 32 bit condition codes */
#define XCC_REGNUM (C0_REGNUM + 40) /* 64 bit condition codes */
#define FCC0_REGNUM (C0_REGNUM + 41) /* fp cc reg 0 */
#define FCC1_REGNUM (C0_REGNUM + 42) /* fp cc reg 1 */
#define FCC2_REGNUM (C0_REGNUM + 43) /* fp cc reg 2 */
#define FCC3_REGNUM (C0_REGNUM + 44) /* fp cc reg 3 */
/* Total amount of space needed to store our copies of the machine's
register state, the array `registers'.
Some of the registers aren't 64 bits, but it's a lot simpler just to assume
they all are (since most of them are). */
#undef REGISTER_BYTES
#define REGISTER_BYTES (32*8+32*8+45*8)
/* Index within `registers' of the first byte of the space for
register N. */
#undef REGISTER_BYTE
#define REGISTER_BYTE(N) \
((N) < 32 ? (N)*8 \
: (N) < 64 ? 32*8 + ((N)-32)*4 \
: (N) < C0_REGNUM ? 32*8 + 32*4 + ((N)-64)*8 \
: 64*8 + ((N)-C0_REGNUM)*8)
/* Say how long (ordinary) registers are. This is a piece of bogosity
used in push_word and a few other places; REGISTER_RAW_SIZE is the
real way to know how big a register is. */
#undef REGISTER_SIZE
#define REGISTER_SIZE 8
/* Number of bytes of storage in the actual machine representation
for register N. */
#undef REGISTER_RAW_SIZE
#define REGISTER_RAW_SIZE(N) \
((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
/* Number of bytes of storage in the program's representation
for register N. */
#undef REGISTER_VIRTUAL_SIZE
#define REGISTER_VIRTUAL_SIZE(N) \
((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
/* Largest value REGISTER_RAW_SIZE can have. */
/* tm-sparc.h defines this as 8, but play it safe. */
#undef MAX_REGISTER_RAW_SIZE
#define MAX_REGISTER_RAW_SIZE 8
/* Largest value REGISTER_VIRTUAL_SIZE can have. */
/* tm-sparc.h defines this as 8, but play it safe. */
#undef MAX_REGISTER_VIRTUAL_SIZE
#define MAX_REGISTER_VIRTUAL_SIZE 8
/* Return the GDB type object for the "standard" data type
of data in register N. */
#undef REGISTER_VIRTUAL_TYPE
#define REGISTER_VIRTUAL_TYPE(N) \
((N) < 32 ? builtin_type_long_long \
: (N) < 64 ? builtin_type_float \
: (N) < 80 ? builtin_type_double \
: builtin_type_long_long)
/* We use to support both 32 bit and 64 bit pointers.
We can't anymore because TARGET_PTR_BIT must now be a constant. */
#undef TARGET_PTR_BIT
#define TARGET_PTR_BIT 64
/* Longs are 64 bits. */
#undef TARGET_LONG_BIT
#define TARGET_LONG_BIT 64
#undef TARGET_LONG_LONG_BIT
#define TARGET_LONG_LONG_BIT 64
/* Does the specified function use the "struct returning" convention
or the "value returning" convention? The "value returning" convention
almost invariably returns the entire value in registers. The
"struct returning" convention often returns the entire value in
memory, and passes a pointer (out of or into the function) saying
where the value (is or should go).
Since this sometimes depends on whether it was compiled with GCC,
this is also an argument. This is used in call_function to build a
stack, and in value_being_returned to print return values.
On Sparc64, we only pass pointers to structs if they're larger then
32 bytes. Otherwise they're stored in %o0-%o3 (floating-point
values go into %fp0-%fp3). */
#undef USE_STRUCT_CONVENTION
#define USE_STRUCT_CONVENTION(gcc_p, type) (TYPE_LENGTH (type) > 32)
#undef REG_STRUCT_HAS_ADDR
#define REG_STRUCT_HAS_ADDR(gcc_p,type) (TYPE_LENGTH (type) > 32)
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
/* FIXME: V9 uses %o0 for this. */
#undef STORE_STRUCT_RETURN
#define STORE_STRUCT_RETURN(ADDR, SP) \
{ target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); }
/* Return number of bytes at start of arglist that are not really args. */
#undef FRAME_ARGS_SKIP
#define FRAME_ARGS_SKIP 136
/* We need two arguments (in general) to the "info frame" command.
Note that the definition of this macro implies that there exists a
function "setup_arbitrary_frame" in sparc-tdep.c */
#undef SETUP_ARBITRARY_FRAME /*FIXME*/
#undef FRAME_SPECIFICATION_DYADIC
#define FRAME_SPECIFICATION_DYADIC
/* To print every pair of float registers as a double, we use this hook.
We also print the condition code registers in a readable format
(FIXME: can expand this to all control regs). */
#undef PRINT_REGISTER_HOOK
#define PRINT_REGISTER_HOOK(regno) \
sparc_print_register_hook (regno)
/* Offsets into jmp_buf.
FIXME: This was borrowed from the v8 stuff and will probably have to change
for v9. */
#define JB_ELEMENT_SIZE 8 /* Size of each element in jmp_buf */
#define JB_ONSSTACK 0
#define JB_SIGMASK 1
#define JB_SP 2
#define JB_PC 3
#define JB_NPC 4
#define JB_PSR 5
#define JB_G1 6
#define JB_O0 7
#define JB_WBCNT 8
/* Figure out where the longjmp will land. We expect that we have just entered
longjmp and haven't yet setup the stack frame, so the args are still in the
output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we
extract the pc (JB_PC) that we will land at. The pc is copied into ADDR.
This routine returns true on success */
extern int
get_longjmp_target PARAMS ((CORE_ADDR *));
#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
extern CORE_ADDR sparc64_read_sp ();
extern CORE_ADDR sparc64_read_fp ();
extern void sparc64_write_sp PARAMS ((CORE_ADDR));
extern void sparc64_write_fp PARAMS ((CORE_ADDR));
#define TARGET_READ_SP() (sparc64_read_sp ())
#define TARGET_READ_FP() (sparc64_read_fp ())
#define TARGET_WRITE_SP(X) (sparc64_write_sp (X))
#define TARGET_WRITE_FP(X) (sparc64_write_fp (X))
#undef TM_PRINT_INSN_MACH
#define TM_PRINT_INSN_MACH bfd_mach_sparc_v9a
CORE_ADDR sp64_push_arguments PARAMS ((int, struct value **, CORE_ADDR, unsigned char, CORE_ADDR));
#undef PUSH_ARGUMENTS
#define PUSH_ARGUMENTS(A,B,C,D,E) (sp = sp64_push_arguments ((A), (B), (C), (D), (E)))
#undef EXTRACT_RETURN_VALUE
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
sparc64_extract_return_value(TYPE, REGBUF, VALBUF, 0)
extern void
sparc64_extract_return_value PARAMS ((struct type *, char [], char *, int));