old-cross-binutils/README.configure
1991-04-15 23:46:50 +00:00

585 lines
26 KiB
Text
Executable file

On Configuring Development Tools
Last Mod Mon Apr 15 10:25:59 PDT 1991, by rich@sendai
INTRO
-----
This document attempts to describe the general concepts behind
configuration of the Cygnus Support release of the GNU Development
Tools. It also discusses common usage. For a more in succint
description, please refer to the man page on "configure" which you
should have received {FIXME: ALONG WITH LOTS OF OTHER VERY PRETTY
HARD COPY OR IN A DIFFERENT DISTRIBUTION OR ON THIS TAPE OR SHRINK
BOX OR SOMETHING}.
BASICS
------
Some Basic Terms:
There are a lot of terms that are frequently used when discussing
development tools. Most of the common terms have been used for
several different concepts such that their meanings have become
ambiguous to the point of being confusing. Typically, we only
guess at their meanings from context and we frequently guess
wrong.
This document uses very few terms by comparison. The intent is to
make the concepts as clear as possible in order to convey the
usage and intent of these tools.
"Programs" run on "machines". Programs are very nearly always
written in "source". Programs are "built" from source.
"Compilation" is a process that is frequently, but not always,
used when building programs.
Host Environments:
In this document, the word "host" refers to the environment in
which this source will be compiled. "host" and "host name" have
nothing to do with the proper name of your host, like "ucbvax",
"prep.ai.mit.edu" or "att.com". Instead they refer to things like
"sun4" and "dec3100".
Forget for a moment that this particular directory of source is
the source for a development environment. Instead, pretend that
it is the source for a simpler, more mundane, application, say, a
desk calculator.
Source that can be compiled in more than one environment,
generally needs to be set up for each environment explicitly.
Here we refer to that process as configuration. That is, we
configure the source for a host.
For example, if we wanted to configure our mythical desk
calculator to compile on a SparcStation, we might configure for
host sun4. With our configuration system:
cd desk-calculator ; configure sun4
does the trick. "configure" is a shell script that sets up
Makefiles, subdirectories, and symbolic links appropriate for
compiling the source on a sun4.
The "host" environment does not necessarily refer to the machine
on which the tools are built. It is possible to provide a sun3
development environment on a sun4. If we wanted to use a cross
compiler on the sun4 to build a program intended to be run on a
sun3, we would configure the source for sun3.
cd desk-calculator ; configure sun3
The fact that we are actually building the program on a sun4 makes
no difference if the sun3 cross compiler presents an environment
that looks like a sun3 from the point of view of the desk
calculator source code. Specifically, the environment is a sun3
environment if the header files, predefined symbols, and libraries
appear as they do on a sun3.
Nor does the host environment refer to the the machine on which
the program to be built will run. It is possible to provide a
sun3 emulation environment on a sun4 such that programs built in a
sun3 development environment actually run on the sun4.
Host environment simply refers to the environment in which the
program will be built from the source.
Configuration Time Options:
Many programs have compile time options. That is, features of the
program that are either compiled into the program or not based on a
choice made by the person who builds the program. We refer to these
as "configuration options". For example, our desk calculator might be
capable of being compiled into a program that either uses infix
notation or postfix as a configuration option. For a sun3, chosing
infix might be:
configure sun3 +notation=infix
while a sun4 with postfix might be:
configure sun4 +notation=postfix
If we wanted to build both at the same time, in the same directory
structure, the intermediate pieces used in the build process must
be kept separate.
configure sun4 +forcesubdirs +notation=postfix
configure sun3 +forcesubdirs +notation=infix
will create subdirectories for the intermediate pieces of the sun4
and sun3 configurations. This is necessary as previous systems
were only capable of one configuration at a time. A second
configuration overwrote the first. We've chosen to retain this
behaviour so the "+forcesubdirs" configuration option is necessary
to get the new behaviour. The order of the arguments doesn't
matter. There should be exactly one argument without a leading
'+' sign and that argument will be assumed to be the host name.
From here on the examples will assume that you want to build the
tools "in place" and won't show the "+forcesubdirs" option, but
remember that it is available.
In order to actually install the program, the configuration system
needs to know where you would like the program installed. The
default location is /usr/local. We refer to this location as
$(destdir). All user visible programs will be installed in
$(destdir)/bin. All other programs and files will be installed in
a subdirectory of $(destdir)/lib. For the tools in this
directory, the files not normally user visible will be installed
in $(destdir)/lib/gcc.
You can elect to change $(destdir) only as a configuration time
option.
configure sun4 +notation=postfix +destdir=/local
Will configure the source such that:
make install
will put it's programs in /local/bin and /local/lib/gcc. If you
change $(destdir) after building the source, you will need to:
make clean
before the change will be propogated properly. This is because
some tools need to know the locations of other tools.
With these concepts in mind, we can drop the desk calculator and
move on to the application that resides in these directories,
namely, the source to a development environment.
SPECIFICS
---------
The GNU Development Tools can be built on a wide variety of hosts.
So, of course, they must be configured. Like the last example,
configure sun4 +destdir=/local
configure sun3 +destdir=/local
will configure the source to be built in subdirectories, in order
to keep the intermediate pieces separate, and to be installed in
/local.
When built with suitable development environments, these will be
native tools. We'll explain the term "native" later.
BUILDING DEVELOPMENT ENVIRONMENTS
---------------------------------
The Cygnus Support GNU development tools can not only be built
with a number of host development environments, they can also be
configured to create a number of different development
environments on each of those hosts. We refer to a specific
development environment created as a "target". That is, the word
"target" refers to the development environment produced by
compiling this source and installing the resulting programs.
For the Cygnus Support GNU development tools, the default target
is the same as the host. That is, the development environment
produced is intended to be compatible with the environment used to
build the tools.
In the example above, we created two configurations, one for sun4
and one for sun3. The first configuration is expecting to be
built in a sun4 development environment, to create a sun4
development environment. It doesn't necessarily need to be built
on a sun4 if a sun4 development environment is available
elsewhere. Likewise, if the available sun4 development
environment produces executables intended for something other than
sun4, then the development environment built from this sun4
configuration will run on something other than a sun4. From the
point of view of the configuration system and the GNU development
tools source, this doesn't matter. What matters is that they will
be built in a sun4 environment.
Similarly, the second configuration given above is expecting to be
built in a sun3 development environment, to create a sun3
development environment.
The development environment produced, is a configuration time
option, just like $(destdir).
configure sun4 +destdir=/local +target=sun3
configure sun3 +destdir=/local +target=sun4
In this example, like before, we create two configurations. The
first is intended to be built in a sun4 environment, in
subdirectories, to be installed in /local. The second is also
intended to be build in a sun4 environment, in subdirectories, to
be installed in /local.
Unlike the previous example, the first configuration will produce
a sun3 development environment, perhaps even suitable for building
the second configuration. Likewise, the second configuration will
produce a sun4 development environment, perhaps even suitable for
building the first configuration.
The development environment used to build these configurations
will determine the machines on which the resulting development
environments can be used.
A WALK THROUGH
--------------
Native Development Environments:
Let us assume for a moment that you have a sun4 and that with your
sun4 you received a development environment. This development
environment is intended to be run on your sun4 to build programs
that can be run on your sun4. You could, for instance, run this
development environment on your sun4 to build our example desk
calculator program. You could then run the desk calculator
program on your sun4.
The resulting desk calculator program is referred to as a "native"
program. The development environment itself is composed of native
programs that, when run, build other native programs. Any other
program is referred to as "foreign". Programs intended for other
machines are foreign programs.
This type of development environment, which is by far the most
common, is refered to as "native". That is, a native development
environment runs on some machine to build programs for that same
machine. The process of using a native development environment to
build native programs is called a "native" build.
configure sun4
Will configure this source such that when built in a sun4
development environment, with a development environment that
builds programs intended to be run on sun4 machines, the programs
built will be native programs and the resulting development
environment will be a native development environment.
The development system that came with your sun4 is one such
environment. Using it to build the GNU Development Tools is a
very common activity and the resulting development environment is
very popular.
make all
will build the tools as configured and will assume that you want
to use the native development environment that came with your
machine.
Using a development environment to build a development environment
is called "bootstrapping". The Cygnus Support release of the GNU
Development Tools is capable of bootstrapping itself. This is a
very powerful feature that we'll return to later. For now, let's
pretend that you used the native development environment that came
with your sun4 to bootstrap the Cygnus Support release and let's
call the new development environment stage1.
Why bother? Well, most people find that the Cygnus Support
release builds programs that run faster and take up less space
than the native development environments that came with their
machines. Some people didn't get development environments with
their machines and some people just like using the GNU tools
better than using other tools.
While you're at it, if the GNU tools produce better programs, maybe
you should use them to build the GNU tools. It's a good idea, so
let's pretend that you do. Let's call the new development
environment stage2.
So far you've built a development environment, stage1, and you've
used stage1 to build a new, faster and smaller development
environment, stage2, but you haven't run any of the programs that
the GNU tools have built. You really don't yet know if these
tools work. Do you have any programs built with the GNU tools?
Yes, you do. stage2. What does that program do? It builds
programs. Ok, do you have any source handy to build into a
program? Yes, you do. The GNU tools themselves. In fact, if you
use stage2 to build the GNU tools again the resulting programs
should be identical to stage2. Let's pretend that you do and call
the new development environment stage3.
You've just completed what's called a "three stage boot". You now
have a small, fast, somewhat tested, development environment.
make bootstrap
will do a three stage boot across all tools and will compare
stage2 to stage3 and complain if they are not identical.
Once built,
make install
will install the development environment in the default location
or in $(destdir) if you specified an alternate when you
configured. In fact, you can skip the "make all" part and just
"make install" which will make sure that the development
environment is built before attempting to install anything. Even
better, for configurations where host is the same as target, like
this one, "make install" will make sure that a "make bootstrap" is
done before installing anything.
Any development environment that is not a native development
environment is refered to as a "cross" development environment.
There are many different types of cross development environments
but most fall into one of FIXME basic categories.
Emulation Environments:
The first category of cross development environment is called
"emulation". There are two primary types of emulation, but both
types result in programs that run on the native host.
The first type is "software emulation". This form of cross
development environment involves a native program that when run on
the native host, is capable of interpreting, and in most aspects
running, a program intended for some other machine. This
technique is typically used when the other machine is either too
expensive, too slow, too fast, or not available, perhaps because
it hasn't yet been built. The native, interpreting program is
called a "software emulator".
The GNU Development Tools do not currently include any software
emulators. Some do exist and the GNU Development Tools can be
configured to create simple cross development environments for
with these emulators. More on this later.
The second type of emulation is when source intended for some
other development environment is built into a program intended for
the native host. The concept of universes in operating systems
and hosted operating systems are two such development
environments.
The Cygnus Support Release of the GNU Development Tools can be
configured for one such emulation at this time.
configure sun4 +ansi
will configure the source such that when built in a sun4
development environment the resulting development environment is
capable of building sun4 programs from strictly conforming ANSI
X3J11 C source. Remember that the environment used to build the
tools determines the machine on which this tools will run, so the
resulting programs aren't necessarily intended to run on a sun4,
although they usually are. Also note that the source for the GNU
tools is not strictly conforming ANSI source so this configuration
cannot be used to bootstrap the GNU tools.
Simple Cross Environments:
configure sun4 +target=a29k
will configure the tools such that when compiled in a sun4
development environment the resulting development environment can
be used to create programs intended for a sun3. Again, this does
not necessarily mean that the new development environment can be
run on a sun4. That would depend on the development environment
used to build these tools.
Earlier you saw how to configure the tools to build a native
development environment, that is, a development environment that
runs on your sun4 and builds programs for your sun4. Let's
pretend that you use stage3 to build this simple cross
configuration and let's call the new development environment
gcc-a29k. Remember that this is a native build. Gcc-a29k is a
collection of native programs intended to run on your sun4.
That's what stage3 builds, programs for your sun4. Gcc-a29k
represents an a29k development environment that builds programs
intended to run on an a29k. But, remember, gcc-a29k runs on your
sun4. Programs built with gcc-a29k will run on your sun4 only
with the help of an appropriate software emulator.
Building gcc-a29k is also a bootstrap but of a slightly different
sort. We call gcc-a29k a simple cross environment and using
gcc-a29k to build a program intended for a29k is called "crossing
to" a29k. Simple cross environments are the second category of
cross development environments.
Crossing Into Targets:
configure a29k +target=a29k
will configure the tools such that when compiled in an a29k
development environment, the resulting development environment can
be used to create programs intended for an a29k. Again, this does
not necessarily mean that the new development environment can be
run on an a29k. That would depend on the development environment
used to build these tools.
If you've been following along this walk through, then you've
already built an a29k environment, namely gcc-a29k. Let's pretend
you use gcc-a29k to build the current configuration.
Gcc-a29k builds programs intended for the a29k so the new
development environment will be intended for use on an a29k. That
is, this new gcc consists of programs that are foreign to your
sun4. They cannot be run on your sun4.
The process of building this configuration is another a bootstrap.
This bootstrap is also a cross to a29k. Because this type of
build is both a bootstrap and a cross to a29k, it is sometimes
referred to as a "cross into" a29k. This new development
environment isn't really a cross development environment at all.
It is intended to run on an a29k to produce programs for an a29k.
You'll remember that this makes it, by definition, an a29k native
compiler. "Crossing into" has been introduced here not because it
is a type of cross development environment, but because it is
frequently confused one. The process is "a cross" but the
resulting development environment is a native development
environment.
You could not have built this configuration with stage3, because
stage3 doesn't provide an a29k environment. Instead it provides a
sun4 environment.
If you happen to have an a29k lying around, you could now use
this fresh development environment on the a29k to three stage
these tools all over again. This process would look just like it
did when we built the native sun4 development environment because
we would be building another native development environment, this
one on a29k.
The Three Party Cross:
So far you've seen that our development environment source must be
configured for a specific host and for a specific target. You've
also seen that the resulting development environment depends on
the development environment used in the build process.
When all four match identically, that is, the configured host, the
configured target, the environment presented by the development
environment used in the build, and the machine on which the
resulting development environment is intended to run, then the new
development environment will be a native development environment.
When all four match except the configured host, then we can assume
that the development environment used in the build is some form of
library emulation.
When all four match except for the configured target, then the
resulting development environment will be a simple cross
development environment.
When all four match except for the host on which the development
environment used in the build runs, the build process is a "cross
into" and the resulting development environment will be native to
some other machine.
Most of the other permutations do exist in some form, but only one
more is interesting to the current discussion.
configure a29k +target=sun3
will configure the tools such that when compiled in an a29k
development environment, the resulting development environment can
be used to create programs intended for a sun3. Again, this does
not necessarily mean that the new development environment can be
run on an a29k. That would depend on the development environment
used to build these tools.
If you are still following along, then you have two a29k
development environments, the native development environment that
runs on a29k, and the simple cross that runs on your sun4. If you
use the a29k native development environment on the a29k, you will
be doing the same thing we did a while back, namely building a
simple cross from a29k to sun3. Let's pretend that instead, you
use gcc-a29k, the simple cross development environment that runs
on sun4 but produces programs for a29k.
The resulting development environment will run on a29k because
that's what gcc-a29k builds, a29k programs. This development
environment will produce programs for a sun3 because that is how
it was configured. This means that the resulting development
environment is a simple cross.
There really isn't a common name for this process because very few
development environments are capable of being configured this
extensively. For the sake of discussion, let's call this process
a "three party cross".
FINAL NOTES
-----------
Gdb's config has features not yet present in the uniform configuration
scheme described here. For this reason, configuration of gdb must
currently be done separately from that of the rest of this package.
This will be corrected soon. For more information on the
configuration of gdb, please refer to the documents in gdb.{your
target} if it exists, otherwise gdb.
By "configures", I mean that links, Makefile, .gdbinit, and
config.status are built. Configuration is always done from the source
directory.
* "./configure name" configures this directory, perhaps recursively,
for a single host+target pair where the host and target are both
"name". If a previous configuration existed, it will be
overwritten.
* "./configure hostname +target=targetname" configures this directory,
perhaps recursively, for a single host+target pair where the host is
hostname and target is targetname. If a previous configuration
existed, it will be overwritten.
* "./configure +forcesubdirs hostname +target=targetname" creates a
subdirectories Host-hostname and Host-hostname/Target-targetname and
configures Host-hostname/Target-targetname. For now, makes should
be done from Host-hostname/Target-targetname. "./configure +f name"
works as expected. That is, it creates Host-name and
Host-name/Target-name and configures the latter.
Hacking configurations:
The configure scripts essentially do three things, create
subdirectories if appropriate, build a Makefile, and create links to
files, all based on and tailored to, a specific host+target pair. The
scripts also create a .gdbinit if appropriate but this is not
tailored.
The Makefile is created by prepending some variable definitions to a
Makefile template called Makefile.in and then inserting host and
target specific Makefile fragments. The variables are set based on
the chosen host+target pair and build style, that is, if you use
subdirectories or not. The host and target specific Makefile may or
may not exist. If fragments
* Makefiles can be editted directly, but those changes will eventually
be lost. Changes intended to be permanent for a specific host
should be made to the host specific Makefile fragment. This should
be in ./config/hmake-host if it exists. Changes intended to be
permanent for a specific target should be made to the target
specific Makefile fragment. This should be in ./config/tmake-target
if it exists. Changes intended to be permanent for the directory
should be made in Makefile.in. To propogate changes to any of
these, either use "make Makefile" or re-configure from the source
directory.
* configure can be editted directly, but those changes will eventually
be lost. Changes intended to be permanent for a specific directory
should be made to configure.in. Changes intended to be permanent
for all configure scripts should be made to configure.template.
Propogating changes to configure.in requires the presence of
configure.template which normally resides in the uppermost directory
you received. To propogate changes to either configure.template or
a configure.in, use "configure +template=absolutepathtothetemplate".
This will configure the configure scripts themselves, recursively if
appropriate.
* "configure -srcdir=foo" is not supported yet. At the moment, things
will probably be configured correctly only for leaf directories, and
even they will not have paths to libraries set properly.