old-cross-binutils/gdb/.Sanitize
Stu Grossman cd10c7e388 * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET
around calls to create_longjmp_breakpoint.  Why install the
	breakpoints if we can't find the longjmp target?
	* infrun.c (wait_for_inferior):  Cleanup comments near call test.
	* remote-mips.c:  Fixed a bunch of prototypes to avoid char/int
	complaint from picky compilers.  Add comment to mips_expect.
	Replace all instances of sr_get_debug with remote_debug.
	* (mips_readchar):  Don't jam init string to monitor.
	mips_initialize() handles that.
	* (mips_receive_header):  Print better message when we get too
	much garbage.
	* (mips_request):  Allow caller to pass in buff to allow them to
	analyze the returned message.
	* (mips_initialize):  Re-do initialization to try sending a BREAK,
	a ^C, and then a download escape sequence.  Cleanup protocol
	startup.  Eliminate sleeps.  Clear breakpoints (if using monitor
	breakpoints).  Re-init frame.
	* (mips_detach):  Close down target.
start-sanitize-gm
	* (mips_resume):  Pass signal down to target.
	* (mips_create_inferior):  Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
	* (mips_wait):  Handle return status with registers, or breakpoint stuff.
	* (mips_kill):  Add ^C handling.
	* (mips_insert_breakpoint mips_remove_breakpoint):  Call new
	breakpoint stuff if enabled.
	* (calculate_mask remote_mips_set_watchpoint
	remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
	Hardware watchpoint/breakpoint stuff.
	* (common_breakpoint):  Common code for new monitor breakpoint commands.
	* (mips_load):  Don't use `prompt'.  It's a global variable.
	* top.c (dont_repeat_command):  New command for use in
	user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
	* utils.c (request_quit):  Call target_kill here.  Good idea.
	Needs a better implementation.
end-sanitize-gm
	* valops.c:  Add start of auto function-call abandonment capability.

start-sanitize-gm
	* c-exp.y:  Add code (currently disabled) to handle GM dynamic
	structures (it conflicts with @!).
	* eval.c (evaluate_subexp_standard):  ditto.
	* expprint.c (print_subexp dump_expression):  ditto.
	* expression.h (enum exp_opcode):  ditto.
	* parse.c (length_of_subexp):  ditto.
	* configure, configure.in:  Add mip*-*-magic* target.
	* magic.c magic.h:  Special routines to handle GM stuff (like
	stepping through dispatcher).
end-sanitize-gm
1995-10-27 17:48:36 +00:00

539 lines
9.4 KiB
Text

# .Sanitize for devo/gdb.
# Each directory to survive its way into a release will need a file
# like this one called "./.Sanitize". All keyword lines must exist,
# and must exist in the order specified by this file. Each directory
# in the tree will be processed, top down, in the following order.
# Hash started lines like this one are comments and will be deleted
# before anything else is done. Blank lines will also be squashed
# out.
# The lines between the "Do-first:" line and the "Things-to-keep:"
# line are executed as a /bin/sh shell script before anything else is
# done in this directory.
Do-first:
arc_files="arc-tdep.c remote-arc.c"
if ( echo $* | grep keep\-arc > /dev/null ) ; then
keep_these_too="${arc_files} ${keep_these_too}"
if [ -n "${verbose}" ] ; then
echo Keeping ${arc_files}
fi
else
lose_these_too="${arc_files} ${lose_these_too}"
if [ -n "${verbose}" ] ; then
echo Deleting ${arc_files}
fi
fi
gdbtk_files="README.GDBTK gdbtk.c gdbtk.tcl"
if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
lose_these_too="${gdbtk_files} ${lose_these_too}"
if [ -n "${verbose}" ] ; then
echo Deleting ${gdbtk_files}
fi
else
keep_these_too="${gdbtk_files} ${keep_these_too}"
if [ -n "${verbose}" ] ; then
echo Keeping ${gdbtk_files}
fi
fi
# WinGDB files are not really ready to be part of FSF releases, but
# keep them for progressives and such.
mswin_files="mswin"
if ( echo $* | grep lose\-mswin > /dev/null ) ; then
lose_these_too="${mswin_files} ${lose_these_too}"
if [ -n "${verbose}" ] ; then
echo Deleting ${mswin_files}
fi
else
keep_these_too="${mswin_files} ${keep_these_too}"
if [ -n "${verbose}" ] ; then
echo Keeping ${mswin_files}
fi
fi
gm_files="magic.c magic.h"
if ( echo $* | grep keep\-gm > /dev/null ) ; then
keep_these_too="${gm_files} ${keep_these_too}"
if [ -n "${verbose}" ] ; then
echo Keeping ${gm_files}
fi
else
lose_these_too="${gm_files} ${lose_these_too}"
if [ -n "${verbose}" ] ; then
echo Deleting ${gm_files}
fi
fi
# All files listed between the "Things-to-keep:" line and the
# "Files-to-sed:" line will be kept. All other files will be removed.
# Directories listed in this section will have their own Sanitize
# called. Directories not listed will be removed in their entirety
# with rm -rf.
Things-to-keep:
.gdbinit
29k-share
COPYING
ChangeLog
ChangeLog-3.x
ChangeLog-9091
ChangeLog-92
ChangeLog-93
ChangeLog-94
Makefile.in
NEWS
README
TODO
a29k-tdep.c
a68v-nat.c
aclocal.m4
alpha-nat.c
alpha-tdep.c
altos-xdep.c
annotate.c
annotate.h
arm-convert.s
arm-tdep.c
arm-xdep.c
blockframe.c
breakpoint.c
breakpoint.h
buildsym.c
buildsym.h
callback.c
callback.h
c-exp.y
c-lang.c
c-lang.h
c-typeprint.c
c-valprint.c
call-cmds.h
ch-exp.y
ch-lang.c
ch-lang.h
ch-typeprint.c
ch-valprint.c
coff-solib.c
coff-solib.h
coffread.c
command.c
command.h
complaints.c
complaints.h
config
configure
configure.in
convex-tdep.c
convex-xdep.c
copying.awk
copying.c
core-sol2.c
core-svr4.c
core.c
coredep.c
corelow.c
cp-valprint.c
cpu32bug-rom.c
cxux-nat.c
dbxread.c
dcache.c
dcache.h
defs.h
delta68-nat.c
demangle.c
doc
dpx2-nat.c
dst.h
dstread.c
dwarfread.c
elfread.c
environ.c
environ.h
eval.c
exec.c
expprint.c
expression.h
f-exp.y
f-lang.c
f-lang.h
f-typeprint.c
f-valprint.c
findvar.c
fork-child.c
frame.h
gdb_stat.h
gdb_string.h
gdb-stabs.h
gdb.1
gdb.gdb
gdba.el
gdbcmd.h
gdbcore.h
gdbserver
gdbtypes.c
gdbtypes.h
go32-xdep.c
gould-tdep.c
gould-xdep.c
h8300-tdep.c
h8500-tdep.c
hp300ux-nat.c
hppa-tdep.c
hppab-nat.c
hppah-nat.c
hppam3-nat.c
hpread.c
i386-stub.c
i386-tdep.c
i386aix-nat.c
i386b-nat.c
i386ly-tdep.c
i386m3-nat.c
i386mach-nat.c
i386v-nat.c
i386v4-nat.c
i387-tdep.c
i960-tdep.c
infcmd.c
inferior.h
inflow.c
infptrace.c
infrun.c
inftarg.c
irix4-nat.c
irix5-nat.c
isi-xdep.c
kdb-start.c
language.c
language.h
lynx-nat.c
m2-exp.y
m2-lang.c
m2-lang.h
m2-typeprint.c
m2-valprint.c
m3-nat.c
m68k-stub.c
m68k-tdep.c
m88k-nat.c
m88k-tdep.c
mac-defs.h
mac-xdep.c
mac-gdb.r
main.c
maint.c
mdebugread.c
mem-break.c
minimon.h
minsyms.c
mips-nat.c
mips-tdep.c
mipsm3-nat.c
mipsv4-nat.c
mipsread.c
monitor.h
monitor.c
mpw-config.in
mpw-make.sed
news-xdep.c
nindy-share
nindy-tdep.c
nlm
nlmread.c
ns32k-tdep.c
ns32km3-nat.c
objfiles.c
objfiles.h
op50-rom.c
os9kread.c
osfsolib.c
parse.c
parser-defs.h
partial-stab.h
printcmd.c
procfs.c
ptx4-nat.c
pyr-tdep.c
pyr-xdep.c
regex.c
regex.h
remote-adapt.c
remote-array.c
remote-bug.c
remote-e7000.c
remote-eb.c
remote-es.c
remote-est.c
remote-hms.c
remote-mips.c
remote-mm.c
remote-nindy.c
remote-nrom.c
remote-os9k.c
remote-pa.c
remote-rdp.c
remote-sim.c
remote-sim.h
remote-st.c
remote-udi.c
remote-utils.c
remote-utils.h
remote-vx.c
remote-vx29k.c
remote-vx68.c
remote-vx960.c
remote-vxmips.c
remote-vxsparc.c
remote.c
rs6000-nat.c
rs6000-tdep.c
rom68k-rom.c
saber.suppress
scm-exp.c
scm-lang.c
scm-lang.h
scm-tags.h
scm-valprint.c
ser-e7kpc.c
ser-go32.c
ser-mac.c
ser-tcp.c
ser-unix.c
serial.c
serial.h
sh-tdep.c
sh3-rom.c
signals.h
solib.c
solib.h
somread.c
somsolib.c
somsolib.h
source.c
sparc-nat.c
sparc-stub.c
sparc-tdep.c
sparcl-stub.c
sparcl-tdep.c
stabsread.c
stabsread.h
stack.c
standalone.c
stop-gdb.c
stuff.c
sun3-nat.c
sun386-nat.c
symfile.c
symfile.h
symm-nat.c
symm-tdep.c
symmisc.c
symtab.c
symtab.h
tahoe-tdep.c
target.c
target.h
terminal.h
testsuite
thread.c
thread.h
top.c
top.h
typeprint.c
typeprint.h
ultra3-nat.c
ultra3-xdep.c
umax-xdep.c
utils.c
valarith.c
valops.c
valprint.c
valprint.h
value.h
values.c
vax-tdep.c
vx-share
w65-tdep.c
w89k-rom.c
win32-nat.c
xcoffread.c
xcoffsolib.c
xcoffsolib.h
xmodem.c
xmodem.h
z8k-tdep.c
# Things which are explicitly *not* kept, for now.
Things-to-lose:
ser-go32-para.c
HOW_TO_RELEASE
Do-last:
# Don't try to clean directories here, as the 'mv' command will fail.
# Also, grep fails on NFS mounted directories.
if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
echo Catering to RMS by removing traces of \"gdbtk\"...
for i in * ; do
if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
echo Removing traces of \"gdbtk\" out of $i...
cp $i new
sed '/start\-sanitize\-gdbtk/,/end-\sanitize\-gdbtk/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
echo Caching $i in .Recover...
mv $i .Recover
fi
mv new $i
fi
done
else
echo Leaving \"gdbtk\" in the sources...
for i in * ; do
if test ! -d $i && (grep sanitize-gdbtk $i > /dev/null) ; then
echo Keeping \"gdbtk\" stuff in $i, but editing out sanitize lines...
cp $i new
sed -e '/start\-sanitize\-gdbtk/d' -e '/end\-sanitize\-gdbtk/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
echo Caching $i in .Recover...
mv $i .Recover
fi
mv new $i
fi
done
fi
r16_files="configure.in configure"
if ( echo $* | grep keep\-r16 > /dev/null ) ; then
for i in $r16_files ; do
if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Keeping r16 stuff in $i
fi
fi
done
else
for i in $r16_files ; do
if test ! -d $i && (grep sanitize-r16 $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Removing traces of \"r16\" from $i...
fi
cp $i new
sed '/start\-sanitize\-r16/,/end-\sanitize\-r16/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
mv $i .Recover
fi
mv new $i
fi
done
fi
arc_files="configure.in configure ChangeLog"
if ( echo $* | grep keep\-arc > /dev/null ) ; then
for i in $arc_files ; do
if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Keeping arc stuff in $i
fi
fi
done
else
for i in $arc_files ; do
if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Removing traces of \"arc\" from $i...
fi
cp $i new
sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
mv $i .Recover
fi
mv new $i
fi
done
fi
sh3e_files="ChangeLog"
if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
for i in $sh3e_files ; do
if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Keeping sh3e stuff in $i
fi
fi
done
else
for i in $sh3e_files ; do
if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Removing traces of \"sh3e\" from $i...
fi
cp $i new
sed '/start\-sanitize\-sh3e/,/end-\sanitize\-sh3e/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
mv $i .Recover
fi
mv new $i
fi
done
fi
if ( echo $* | grep keep\-gm > /dev/null ) ; then
for i in * ; do
if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Keeping gm stuff in $i
fi
fi
done
else
for i in * ; do
if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
if [ -n "${verbose}" ] ; then
echo Removing traces of \"gm\" from $i...
fi
cp $i new
sed '/start\-sanitize\-gm/,/end-\sanitize\-gm/d' < $i > new
if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
if [ -n "${verbose}" ] ; then
echo Caching $i in .Recover...
fi
mv $i .Recover
fi
mv new $i
fi
done
fi
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
echo '***' Some mentions of Sanitize are still left in $i! 1>&2
fi
done
#
# End of file.