old-cross-binutils/cfg-ml-com.in
1995-08-24 18:57:12 +00:00

410 lines
12 KiB
Text

# Configure fragment invoked in the common section for subdirs
# wanting multilib support.
#
# The common section was chosen because xiberty clobbers $srcdir in the
# common section of its configure.in.
#
# The intent is to keep as much of this in one place as possible (and out
# of each subdirectory, eg: newlib, libio, etc.) until the right way to do
# this (ha ha) is decided upon.
#
# This is where a target selects what multilib directories to build.
# It is advisable to support a few --enable/--disable options to let the
# user select which libraries s/he really wants.
#
# FIXME: Multilib is currently disabled by default for everything other than
# newlib. It is up to each target to turn on multilib support for the other
# libraries as desired.
#
# FIXME: It would be better if we could use the --print-multi-lib switch to
# gcc to get the list of directories to build, but at this point the compiler
# has not been built.
# Only do this if --enable-multilib.
# And only if at the top level, not a multilib subdirectory.
if [ "${enable_multilib}" = yes -a -z "${with_multisubdir}" ]; then
# Doing this in the common section means ${target} isn't set yet, so compute
# a copy here. This is a bit kludgey, but again the current (short term) goal
# is to be as unobtrusive (sp?) to the rest of the sources as possible.
if result=`${config_shell} ${configsub} ${target_alias}` ; then
true
else
echo "Unrecognized target system name ${target_alias}." 1>&2
exit 1
fi
target_cpu=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
target_vendor=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
target_os=`echo $result | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
target=${target_cpu}-${target_vendor}-${target_os}
# FIXME: Perhaps we can do something like the following instead.
# Fetch from gcc the multilib directories to use if we can.
# if [ -f ${srcdir}/../gcc/genmultilib -a -f ../gcc/Makefile ]; then
# options=`grep "^MULTILIB_OPTIONS" ../gcc/Makefile | sed -e 's/^.*=//'`
# multidirs=`${srcdir}/../gcc/genmultilib "$options" | \
# sed -e 's/^#define.*//' -e 's/^[.].*//' -e 's/".*//' -e 's/ .*//'`
# else
# multidirs=""
# fi
case "${target}" in
# start-sanitize-arc
arc-sbp-elf*)
if [ x$enable_biendian = xyes ]
then
multidirs="be host graphics audio be/host be/graphics be/audio"
else
multidirs="host graphics audio"
fi
;;
arc-*-*)
multidirs="be"
;;
# end-sanitize-arc
hppa*-*-*)
multidirs="soft-float"
;;
m68*-*-*)
multidirs="m68000 m68020 m68881 msoft-float m68000/m68881 m68000/msoft-float m68020/m68881 m68020/msoft-float"
;;
i960-*-*)
multidirs=float
;;
sparclite-*-* | sparclitefrw*-*-*)
multidirs="mfpu msoft-float mflat mno-flat mfpu/mflat mfpu/mno-flat msoft-float/mflat msoft-float/mno-flat"
;;
sparc-*-* | sparcfrw*-*-*)
multidirs="soft v8 soft/v8"
;;
z8k-*-coff)
multidirs="z8001 std z8001/std"
;;
h8300-*-*)
multidirs=h8300h
;;
h8500-*-*)
multidirs="mbig msmall mcompact mmedium"
;;
sh-*-*)
multidirs="ml"
;;
mips*-*-*)
# Note that not all of these will be built for a particular
# target; what is build depends upon the output gcc
# --print-multi-lib. We configure them all, to make our life
# simpler here. If somebody cares about configuration
# efficiency, they will need to switch off on the various
# targets to configure just the directories needed for that
# target.
#
# In the long run, it would be better to configure based on
# the output of gcc --print-multi-lib, but, to do that, we
# would have to build gcc before configuring newlib.
#
# Default to including the single-float directories.
if [ x$enable_single_float = x ]; then
enable_single_float=yes
fi
if [ x$enable_single_float = xyes ]; then
multidirs="soft-float single el eb mips1 mips3 soft-float/el soft-float/eb soft-float/mips1 soft-float/mips3 soft-float/el/mips1 soft-float/el/mips3 soft-float/eb/mips1 soft-float/eb/mips3 single/el single/eb single/mips1 single/mips3 single/el/mips1 single/el/mips3 single/eb/mips1 single/eb/mips3 el/mips1 el/mips3 eb/mips1 eb/mips3"
else
multidirs="soft-float el eb mips1 mips3 soft-float/el soft-float/eb soft-float/mips1 soft-float/mips3 soft-float/el/mips1 soft-float/el/mips3 soft-float/eb/mips1 soft-float/eb/mips3 el/mips1 el/mips3 eb/mips1 eb/mips3"
fi
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*endian* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_relocatable = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*relocatable* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_sysv = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*sysv* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
;;
powerpc-*-eabiaix*)
multidirs="soft-float relocatable little-endian call-sysv little-endian/call-sysv relocatable/little-endian relocatable/call-sysv relocatable/little-endian/call-sysv soft-float/relocatable soft-float/little-endian soft-float/call-sysv soft-float/little-endian/call-sysv soft-float/relocatable/little-endian soft-float/relocatable/call-sysv soft-float/relocatable/little-endian/call-sysv"
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*endian* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_relocatable = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*relocatable* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_sysv = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*sysv* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
;;
powerpc*-*-eabisim*)
multidirs="little-endian big-endian mrelocatable little-endian/mrelocatable big-endian/mrelocatable"
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*endian* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_relocatable = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*relocatable* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
;;
powerpc-*-eabi* | powerpc-*-elf* | powerpc-*-sysv4*)
multidirs="soft-float relocatable little-endian call-aix little-endian/call-aix relocatable/little-endian relocatable/call-aix relocatable/little-endian/call-aix soft-float/relocatable soft-float/little-endian soft-float/call-aix soft-float/little-endian/call-aix soft-float/relocatable/little-endian soft-float/relocatable/call-aix soft-float/relocatable/little-endian/call-aix"
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*endian* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_relocatable = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*relocatable* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_aix = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*aix* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
;;
powerpcle-*-eabi* | powerpcle-*-elf* | powerpcle-*-sysv4*)
multidirs="soft-float relocatable big-endian call-aix big-endian/call-aix relocatable/big-endian relocatable/call-aix relocatable/big-endian/call-aix soft-float/relocatable soft-float/big-endian soft-float/call-aix soft-float/big-endian/call-aix soft-float/relocatable/big-endian soft-float/relocatable/call-aix soft-float/relocatable/big-endian/call-aix"
if [ x$enable_biendian = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*endian* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_softfloat = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*soft-float* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_relocatable = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*relocatable* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
if [ x$enable_aix = xno ]
then
old_multidirs="${multidirs}"
multidirs=""
for x in ${old_multidirs}; do
case "$x" in
*aix* ) : ;;
*) if [ x"$multidirs" = x ]; then multidirs="$x"; else multidirs="${multidirs} ${x}"; fi ;;
esac
done
fi
;;
*)
multidirs=
;;
esac
# We must freshly configure each subdirectory. This bit of code is
# actually partially stolen from the main configure script. FIXME.
if [ -n "${multidirs}" ] && [ -z "${norecursion}" ]; then
for dir in ${multidirs}; do
if [ -d ${dir} ]; then true; else mkdir ${dir}; fi
dotdot=../`echo ${dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
case ${srcdir} in
".")
echo Building symlink tree in `pwd`/${dir}
rm -f tmpconfig
cat >tmpconfig <<\EOF
#!/bin/sh
for f in `ls -a $1`; do
if [ -d $1$f ]; then
found=
for i in $2; do
if [ "$f" = "$i" ]; then
found=yes
fi
done
if [ -z "${found}" ]; then
if [ -d $f ]; then true; else mkdir $f; fi
(cd $f; ../$0 ../$1$f/ "$2")
fi
else
rm -f $f
ln -s $1$f .
fi
done
EOF
chmod +x tmpconfig
(cd ${dir};
${dotdot}tmpconfig ${dotdot} ". .. CVS tmpconfig ${multidirs}")
rm -f tmpconfig
srcdiroption=
;;
*)
case "${srcdir}" in
/*) # absolute path
newsrcdir=${srcdir}/${configdir}
;;
*) # otherwise relative
newsrcdir=${dotdot}${srcdir}/${configdir}
;;
esac
srcdiroption="-srcdir=${newsrcdir}"
;;
esac
case "${progname}" in
/*) recprog=${progname} ;;
*) recprog=${dotdot}${progname} ;;
esac
POPDIR=${PWD=`pwd`}
cd ${dir}
if eval ${config_shell} ${recprog} ${verbose} \
--with-multisubdir=${dir} \
${buildopt} --host=${host_alias} --target=${target_alias} \
${prefixoption} ${tmpdiroption} ${exec_prefixoption} \
${srcdiroption} ${program_prefixoption} ${program_suffixoption} \
${program_transform_nameoption} ${site_option} ${withoptions} \
${withoutoptions} ${enableoptions} ${disableoptions} \
${cache_file_option} ${removing} ${other_options} ${redirect} ; then
true
else
exit 1
fi
cd ${POPDIR}
done
fi
fi # ${enable_multilib = yes -a -z ${with_multisubdir}