old-cross-binutils/gas/doc/c-lm32.texi
Nick Clifton 7c31ae1375 PR gas/12390
* doc/all.texi: Add NS32K
	* doc/as.texinfo: Remove target specific details of which
	characters act as comment initiators and statement separators into
	individual target specific files.
	* doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
	the hash character at the start of a line.
	* doc/c-arm.texi (ARM-Chars): Likewise.
	* doc/c-avr.texi (AVR-Chars): Likewise.
	* doc/c-d10v.texi (D10V-Chars): Likewise.
	* doc/c-d30v.texi (D30V-Chars):	Likewise.
	* doc/c-mmix.texi (MMIX-Chars): Likewise.
	* doc/c-s390.texi (s390 characters): Likewise.
	* doc/c-sh.texi (SH-Chars): Likewise.
	* doc/c-sh64.texi (SH64-Chars): Likewise.
	* doc/c-sparc.texi (SPARC-Chars): Likewise.
	* doc/c-tic6x.texi (TIC6X Syntax): Likewise.
	* doc/c-xtensa.texi (Xtensa Syntax): Likewise.
	* doc/c-z80.texi (Z80-Chars): Likewise.
	* doc/c-z8k.texi (Z8000-Chars): Likewise.
	* doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
	* doc/c-arc.texi (ARC-Chars): Fill in this subsection.
	* doc/c-bfin.texi (Blackfin Syntax): Document line comment and
	line separator characters.
	* doc/c-cr16.texi (CR16 Syntax): Likewise.
	* doc/c-i386.texi (i386-Chars): Likewise.
	* doc/c-i860.texi (i860-Chars):	Likewise.
	* doc/c-i960.texi (i960-Chars):	Likewise.
	* doc/c-ip2k.texi (IP2K-Chars):	Likewise.
	* doc/c-lm32.texi (LM32-Chars):	likewise.
	* doc/c-m32c.texi (M32C-Chars): Likewise.
	* doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
	* doc/c-m68k.texi (M68K-Chars): Likewise.
	* doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
	* doc/c-msp430.texi (MSP430-Chars): Likewise.
	* doc/c-mt.texi (MT-Chars): Likewise.
	* doc/c-ns32k.texi (NS32K-Chars): Likewise.
	* doc/c-pj.texi (PJ-Chars): Likewise.
	* doc/c-ppc.texi (PowerPC-Chars): Likewise.
	* doc/c-rx.texi (RX-Chars): Likewise.
	* doc/c-score.texi (SCORE-Chars): Likewise.
	* doc/c-tic54x.texi (TIC54X-Chars): Likewise.
	* doc/c-v850.texi (V850-Chars): Likewise.
	* doc/c-vax.texi (VAX-Chars): Likewise.
	* doc/c-xc16x.texi (xc16x-Chars): Likewise.
2011-01-18 13:37:39 +00:00

233 lines
5.1 KiB
Text

@c Copyright 2008, 2011
@c Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@ifset GENERIC
@page
@node LM32-Dependent
@chapter LM32 Dependent Features
@end ifset
@ifclear GENERIC
@node Machine Dependencies
@chapter LM£" Dependent Features
@end ifclear
@cindex LM32 support
@menu
* LM32 Options:: Options
* LM32 Syntax:: Syntax
* LM32 Opcodes:: Opcodes
@end menu
@node LM32 Options
@section Options
@cindex LM32 options (none)
@cindex options for LM32 (none)
@table @code
@cindex @code{-mmultiply-enabled} command line option, LM32
@item -mmultiply-enabled
Enable multiply instructions.
@cindex @code{-mdivide-enabled} command line option, LM32
@item -mdivide-enabled
Enable divide instructions.
@cindex @code{-mbarrel-shift-enabled} command line option, LM32
@item -mbarrel-shift-enabled
Enable barrel-shift instructions.
@cindex @code{-msign-extend-enabled} command line option, LM32
@item -msign-extend-enabled
Enable sign extend instructions.
@cindex @code{-muser-enabled} command line option, LM32
@item -muser-enabled
Enable user defined instructions.
@cindex @code{-micache-enabled} command line option, LM32
@item -micache-enabled
Enable instruction cache related CSRs.
@cindex @code{-mdcache-enabled} command line option, LM32
@item -mdcache-enabled
Enable data cache related CSRs.
@cindex @code{-mbreak-enabled} command line option, LM32
@item -mbreak-enabled
Enable break instructions.
@cindex @code{-mall-enabled} command line option, LM32
@item -mall-enabled
Enable all instructions and CSRs.
@end table
@node LM32 Syntax
@section Syntax
@menu
* LM32-Regs:: Register Names
* LM32-Modifiers:: Relocatable Expression Modifiers
* LM32-Chars:: Special Characters
@end menu
@node LM32-Regs
@subsection Register Names
@cindex LM32 register names
@cindex register names, LM32
LM32 has 32 x 32-bit general purpose registers @samp{r0},
@samp{r1}, ... @samp{r31}.
The following aliases are defined: @samp{gp} - @samp{r26},
@samp{fp} - @samp{r27}, @samp{sp} - @samp{r28},
@samp{ra} - @samp{r29}, @samp{ea} - @samp{r30},
@samp{ba} - @samp{r31}.
LM32 has the following Control and Status Registers (CSRs).
@table @code
@item IE
Interrupt enable.
@item IM
Interrupt mask.
@item IP
Interrupt pending.
@item ICC
Instruction cache control.
@item DCC
Data cache control.
@item CC
Cycle counter.
@item CFG
Configuration.
@item EBA
Exception base address.
@item DC
Debug control.
@item DEBA
Debug exception base address.
@item JTX
JTAG transmit.
@item JRX
JTAG receive.
@item BP0
Breakpoint 0.
@item BP1
Breakpoint 1.
@item BP2
Breakpoint 2.
@item BP3
Breakpoint 3.
@item WP0
Watchpoint 0.
@item WP1
Watchpoint 1.
@item WP2
Watchpoint 2.
@item WP3
Watchpoint 3.
@end table
@node LM32-Modifiers
@subsection Relocatable Expression Modifiers
@cindex LM32 modifiers
@cindex syntax, LM32
The assembler supports several modifiers when using relocatable addresses
in LM32 instruction operands. The general syntax is the following:
@smallexample
modifier(relocatable-expression)
@end smallexample
@table @code
@cindex symbol modifiers
@item lo
This modifier allows you to use bits 0 through 15 of
an address expression as 16 bit relocatable expression.
@item hi
This modifier allows you to use bits 16 through 23 of an address expression
as 16 bit relocatable expression.
For example
@smallexample
ori r4, r4, lo(sym+10)
orhi r4, r4, hi(sym+10)
@end smallexample
@item gp
This modified creates a 16-bit relocatable expression that is
the offset of the symbol from the global pointer.
@smallexample
mva r4, gp(sym)
@end smallexample
@item got
This modifier places a symbol in the GOT and creates a 16-bit
relocatable expression that is the offset into the GOT of this
symbol.
@smallexample
lw r4, (gp+got(sym))
@end smallexample
@item gotofflo16
This modifier allows you to use the bits 0 through 15 of an
address which is an offset from the GOT.
@item gotoffhi16
This modifier allows you to use the bits 16 through 31 of an
address which is an offset from the GOT.
@smallexample
orhi r4, r4, gotoffhi16(lsym)
addi r4, r4, gotofflo16(lsym)
@end smallexample
@end table
@node LM32-Chars
@subsection Special Characters
@cindex line comment character, LM32
@cindex LM32 line comment character
The presence of a @samp{#} on a line indicates the start of a comment
that extends to the end of the current line. Note that if a line
starts with a @samp{#} character then it can also be a logical line
number directive (@pxref{Comments}) or a preprocessor
control command (@pxref{Preprocessing}).
@cindex line separator, LM32
@cindex statement separator, LM32
@cindex LM32 line separator
A semicolon (@samp{;}) can be used to separate multiple statements on
the same line.
@node LM32 Opcodes
@section Opcodes
@cindex LM32 opcode summary
@cindex opcode summary, LM32
@cindex mnemonics, LM32
@cindex instruction summary, LM32
For detailed information on the LM32 machine instruction set, see
@url{http://www.latticesemi.com/products/intellectualproperty/ipcores/mico32/}.
@code{@value{AS}} implements all the standard LM32 opcodes.