802e8e6d84
This patch fixes hardware breakpoint regressions exposed by my fix for "PR breakpoints/7143 - Watchpoint does not trigger when first set", at https://sourceware.org/ml/gdb-patches/2014-03/msg00167.html The testsuite caught them on Linux/x86_64, at least. gdb.sum: gdb.sum: FAIL: gdb.base/hbreak2.exp: next over recursive call FAIL: gdb.base/hbreak2.exp: backtrace from factorial(5.1) FAIL: gdb.base/hbreak2.exp: continue until exit at recursive next test gdb.log: (gdb) next Program received signal SIGTRAP, Trace/breakpoint trap. factorial (value=4) at ../../../src/gdb/testsuite/gdb.base/break.c:113 113 if (value > 1) { /* set breakpoint 7 here */ (gdb) FAIL: gdb.base/hbreak2.exp: next over recursive call Actually, that patch just exposed a latent issue to "breakpoints always-inserted off" mode, not really caused it. After that patch, GDB no longer removes breakpoints at each internal event, thus making some scenarios behave like breakpoint always-inserted on. The bug is easy to trigger with always-inserted on. The issue is that since the target-side breakpoint conditions support, if the stub/server supports evaluating breakpoint conditions on the target side, then GDB is sending duplicate Zx packets to the target without removing them before, and GDBserver is not really expecting that for Z packets other than Z0/z0. E.g., with "set breakpoint always-inserted on" and "set debug remote 1": (gdb) b main Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) b main Note: breakpoint 4 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) b main Note: breakpoints 4 and 5 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) del Delete all breakpoints? (y or n) y Sending packet: $Z0,410943,1#48...Packet received: OK Sending packet: $Z0,410943,1#48...Packet received: OK Sending packet: $z0,410943,1#68...Packet received: OK And for Z1, similarly: (gdb) hbreak main Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Packet Z1 (hardware-breakpoint) is supported (gdb) hbreak main Note: breakpoint 4 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ (gdb) hbreak main Note: breakpoints 4 and 5 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ (gdb) del Delete all breakpoints? (y or n) y Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Sending packet: $z1,410943,1#69...Packet received: OK ^^^^^^^^^^^^ So GDB sent a bunch of Z1 packets, and then when finally removing the breakpoint, only one z1 packet was sent. On the GDBserver side (with monitor set debug-hw-points 1), in the Z1 case, we see: $ ./gdbserver :9999 ./gdbserver Process ./gdbserver created; pid = 8629 Listening on port 9999 Remote debugging from host 127.0.0.1 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=1 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=2 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=3 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=5 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 remove_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 That's one insert_watchpoint call for each Z1 packet, and then one remove_watchpoint call for the z1 packet. Notice how ref.count increased for each insert_watchpoint call, and then in the end, after GDB told GDBserver to forget about the hardware breakpoint, GDBserver ends with the the first debug register still with ref.count=4! IOW, the hardware breakpoint is left armed on the target, while on the GDB end it's gone. If the program happens to execute 0x410943 afterwards, then the CPU traps, GDBserver reports the trap to GDB, and GDB not having a breakpoint set at that address anymore, reports to the user a spurious SIGTRAP. This is exactly what is happening in the hbreak2.exp test, though in that case, it's a shared library event that triggers a breakpoint_re_set, when breakpoints are still inserted (because nowadays GDB doesn't remove breakpoints while handling internal events), and that recreates breakpoint locations, which likewise forces breakpoint reinsertion and Zx packet resends... That is a lot of bogus Zx duplication that should possibly be addressed on the GDB side. GDB resends Zx packets because the way to change the target-side condition, is to resend the breakpoint to the server with the new condition. (That's an option in the packet: e.g., "Z1,410943,1;X3,220027" for "hbreak main if 0". The packets in the examples above are shorter because the breakpoints don't have conditions attached). GDB doesn't remove the breakpoint first before reinserting it because that'd be bad for non-stop, as it'd open a window where the inferior could miss the breakpoint. The conditions actually haven't changed between the resends, but GDB isn't smart enough to realize that. (TBC, if the target doesn't support target-side conditions, then GDB doesn't trigger these resends (init_bp_location calls mark_breakpoint_location_modified, and that does nothing if condition evaluation is on the host side. The resends are caused by the 'loc->condition_changed = condition_modified.' line.) But, even if GDB was made smarter, GDBserver should really still handle the resends anyway. So target-side conditions also aren't really to blame. The documentation of the Z/z packets says: "To avoid potential problems with duplicate packets, the operations should be implemented in an idempotent way." As such, we may want to fix GDB, but we should definitely fix GDBserver. The fix is a prerequisite for target-side conditions on hardware breakpoints anyway (and while at it, on watchpoints too). GDBserver indeed already treats duplicate Z0 packets in an idempotent way. mem-break.c has the concept of high-level and low-level breakpoints, somewhat similar to GDB's split of breakpoints vs breakpoint locations, and keeps track of multiple breakpoints referencing the same address/location, for the case of an internal GDBserver breakpoint or a tracepoint being set at the same address as a GDB breakpoint. But, it only allows GDB to ever contribute one reference to a software breakpoint location. IOW, if gdbserver sees a Z0 packet for the same address where it already had a GDB breakpoint set, then GDBserver won't create another high-level GDB breakpoint. However, mem-break.c only tracks GDB Z0 breakpoints. The same logic should apply to all kinds of Zx packets. Currently, gdbserver passes down each duplicate Zx (other than Z0) request directly to the target->insert_point routine. The x86 watchpoint support itself refcounts watchpoint / hw breakpoint requests, to handle overlapping watchpoints, and save debug registers. But that code doesn't (and really shouldn't) handle the duplicate requests, assuming that for each insert there will be a corresponding remove. So the fix is to generalize mem-break.c to track all kinds of Zx breakpoints, and filter out duplicates. As mentioned, this ends up adding support for target-side conditions on hardware breakpoints and watchpoints too (though GDB itself doesn't support the latter yet). Probably the least obvious change in the patch is that it kind of turns the breakpoint insert/remove APIs inside out. Before, the target methods were only called for GDB breakpoints. The internal breakpoint set/delete methods inserted memory breakpoints directly bypassing the insert/remove target methods. That's not good when the target should use a debug API to set software breakpoints, instead of relying on GDBserver patching memory with breakpoint instructions, as is the case of NTO. Now removal/insertion of all kinds of breakpoints/watchpoints, either internal, or from GDB, always go through the target methods. The insert_point/remove_point methods no longer get passed a Z packet type, but an internal/raw breakpoint type. They're also passed a pointer to the raw breakpoint itself (note that's still opaque outside mem-break.c), so that insert_memory_breakpoint / remove_memory_breakpoint have access to the breakpoint's shadow buffer. I first tried passing down a new structure based on GDB's "struct bp_target_info" (actually with that name exactly), but then decided against it as unnecessary complication. As software/memory breakpoints work by poking at memory, when setting a GDB Z0 breakpoint (but not internal breakpoints, as those can assume the conditions are already right), we need to tell the target to prepare to access memory (which on Linux means stop threads). If that operation fails, we need to return error to GDB. Seeing an error, if this is the first breakpoint of that type that GDB tries to insert, GDB would then assume the breakpoint type is supported, but it may actually not be. So we need to check whether the type is supported at all before preparing to access memory. And to solve that, the patch adds a new target->supports_z_point_type method that is called before actually trying to insert the breakpoint. Other than that, hopefully the change is more or less obvious. New test added that exercises the hbreak2.exp regression in a more direct way, without relying on a breakpoint re-set happening before main is reached. Tested by building GDBserver for: aarch64-linux-gnu arm-linux-gnueabihf i686-pc-linux-gnu i686-w64-mingw32 m68k-linux-gnu mips-linux-gnu mips-uclinux nios2-linux-gnu powerpc-linux-gnu sh-linux-gnu tilegx-unknown-linux-gnu x86_64-redhat-linux x86_64-w64-mingw32 And also regression tested on x86_64 Fedora 20. gdb/gdbserver/ 2014-05-20 Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_insert_point) (aarch64_remove_point): No longer check whether the type is supported here. Adjust to new interface. (the_low_target): Install aarch64_supports_z_point_type as supports_z_point_type method. * linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function. (arm_linux_hw_point_initialize): Take an enum raw_bkpt_type instead of a Z packet char. Adjust. (arm_supports_z_point_type): New function. (arm_insert_point, arm_remove_point): Adjust to new interface. (the_low_target): Install arm_supports_z_point_type. * linux-crisv32-low.c (cris_supports_z_point_type): New function. (cris_insert_point, cris_remove_point): Adjust to new interface. Don't check whether the type is supported here. (the_low_target): Install cris_supports_z_point_type. * linux-low.c (linux_supports_z_point_type): New function. (linux_insert_point, linux_remove_point): Adjust to new interface. * linux-low.h (struct linux_target_ops) <insert_point, remove_point>: Take an enum raw_bkpt_type instead of a char. Add raw_breakpoint pointer parameter. <supports_z_point_type>: New method. * linux-mips-low.c (mips_supports_z_point_type): New function. (mips_insert_point, mips_remove_point): Adjust to new interface. Use mips_supports_z_point_type. (the_low_target): Install mips_supports_z_point_type. * linux-ppc-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-s390-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-sparc-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-x86-low.c (x86_supports_z_point_type): New function. (x86_insert_point): Adjust to new insert_point interface. Use insert_memory_breakpoint. Adjust to new i386_low_insert_watchpoint interface. (x86_remove_point): Adjust to remove_point interface. Use remove_memory_breakpoint. Adjust to new i386_low_remove_watchpoint interface. (the_low_target): Install x86_supports_z_point_type. * lynx-low.c (lynx_target_ops): Install NULL as supports_z_point_type callback. * nto-low.c (nto_supports_z_point_type): New. (nto_insert_point, nto_remove_point): Adjust to new interface. (nto_target_ops): Install nto_supports_z_point_type. * mem-break.c: Adjust intro comment. (struct raw_breakpoint) <raw_type, size>: New fields. <inserted>: Update comment. <shlib_disabled>: Delete field. (enum bkpt_type) <gdb_breakpoint>: Delete value. <gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2, gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values. (raw_bkpt_type_to_target_hw_bp_type): New function. (find_enabled_raw_code_breakpoint_at): New function. (find_raw_breakpoint_at): New type and size parameters. Use them. (insert_memory_breakpoint): New function, based off set_raw_breakpoint_at. (remove_memory_breakpoint): New function. (set_raw_breakpoint_at): Reimplement. (set_breakpoint): New, based on set_breakpoint_at. (set_breakpoint_at): Reimplement. (delete_raw_breakpoint): Go through the_target->remove_point instead of assuming memory breakpoints. (find_gdb_breakpoint_at): Delete. (Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions. (find_gdb_breakpoint): New function. (set_gdb_breakpoint_at): Delete. (z_type_supported): New function. (set_gdb_breakpoint_1): New function, loosely based off set_gdb_breakpoint_at. (check_gdb_bp_preconditions, set_gdb_breakpoint): New functions. (delete_gdb_breakpoint_at): Delete. (delete_gdb_breakpoint_1): New function, loosely based off delete_gdb_breakpoint_at. (delete_gdb_breakpoint): New function. (clear_gdb_breakpoint_conditions): Rename to ... (clear_breakpoint_conditions): ... this. Don't handle a NULL breakpoint. (add_condition_to_breakpoint): Make static. (add_breakpoint_condition): Take a struct breakpoint pointer instead of an address. Adjust. (gdb_condition_true_at_breakpoint): Rename to ... (gdb_condition_true_at_breakpoint_z_type): ... this, and add z_type parameter. (gdb_condition_true_at_breakpoint): Reimplement. (add_breakpoint_commands): Take a struct breakpoint pointer instead of an address. Adjust. (gdb_no_commands_at_breakpoint): Rename to ... (gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type parameter. Return true if no breakpoint was found. Change debug output. (gdb_no_commands_at_breakpoint): Reimplement. (run_breakpoint_commands): Rename to ... (run_breakpoint_commands_z_type): ... this. Add z_type parameter, and change return type to boolean. (run_breakpoint_commands): New function. (gdb_breakpoint_here): Also check for Z1 breakpoints. (uninsert_raw_breakpoint): Don't try to reinsert a disabled breakpoint. Go through the_target->remove_point instead of assuming memory breakpoint. (uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert software and hardware breakpoints. (reinsert_raw_breakpoint): Go through the_target->insert_point instead of assuming memory breakpoint. (reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert software and hardware breakpoints. (check_breakpoints, breakpoint_here, breakpoint_inserted_here): Check both software and hardware breakpoints. (validate_inserted_breakpoint): Assert the breakpoint is a software breakpoint. Set the inserted flag to -1 instead of setting shlib_disabled. (delete_disabled_breakpoints): Adjust. (validate_breakpoints): Only validate software breakpoints. Adjust to inserted flag change. (check_mem_read, check_mem_write): Skip breakpoint types other than software breakpoints. Adjust to inserted flag change. * mem-break.h (enum raw_bkpt_type): New enum. (raw_breakpoint, struct process_info): Forward declare. (Z_packet_to_target_hw_bp_type): Delete declaration. (raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type) (set_gdb_breakpoint, delete_gdb_breakpoint) (clear_breakpoint_conditions): New declarations. (set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete. (breakpoint_inserted_here): Update comment. (add_breakpoint_condition, add_breakpoint_commands): Replace address parameter with a breakpoint pointer parameter. (gdb_breakpoint_here): Update comment. (delete_gdb_breakpoint_at): Delete. (insert_memory_breakpoint, remove_memory_breakpoint): Declare. * server.c (process_point_options): Take a struct breakpoint pointer instead of an address. Adjust. (process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and delete_gdb_breakpoint. * spu-low.c (spu_target_ops): Install NULL as supports_z_point_type method. * target.h: Include mem-break.h. (struct target_ops) <prepare_to_access_memory>: Update comment. <supports_z_point_type>: New field. <insert_point, remove_point>: Take an enum raw_bkpt_type argument instead of a char. Also take a raw breakpoint pointer. * win32-arm-low.c (the_low_target): Install NULL as supports_z_point_type. * win32-i386-low.c (i386_supports_z_point_type): New function. (i386_insert_point, i386_remove_point): Adjust to new interface. (the_low_target): Install i386_supports_z_point_type. * win32-low.c (win32_supports_z_point_type): New function. (win32_insert_point, win32_remove_point): Adjust to new interface. (win32_target_ops): Install win32_supports_z_point_type. * win32-low.h (struct win32_target_ops): <supports_z_point_type>: New method. <insert_point, remove_point>: Take an enum raw_bkpt_type argument instead of a char. Also take a raw breakpoint pointer. gdb/testsuite/ 2014-05-20 Pedro Alves <palves@redhat.com> * gdb.base/break-idempotent.c: New file. * gdb.base/break-idempotent.exp: New file.
860 lines
22 KiB
C
860 lines
22 KiB
C
/* GNU/Linux/MIPS specific low level interface, for the remote server for GDB.
|
|
Copyright (C) 1995-2014 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "server.h"
|
|
#include "linux-low.h"
|
|
|
|
#include <sys/ptrace.h>
|
|
#include <endian.h>
|
|
|
|
#include "mips-linux-watch.h"
|
|
#include "gdb_proc_service.h"
|
|
|
|
/* Defined in auto-generated file mips-linux.c. */
|
|
void init_registers_mips_linux (void);
|
|
extern const struct target_desc *tdesc_mips_linux;
|
|
|
|
/* Defined in auto-generated file mips-dsp-linux.c. */
|
|
void init_registers_mips_dsp_linux (void);
|
|
extern const struct target_desc *tdesc_mips_dsp_linux;
|
|
|
|
/* Defined in auto-generated file mips64-linux.c. */
|
|
void init_registers_mips64_linux (void);
|
|
extern const struct target_desc *tdesc_mips64_linux;
|
|
|
|
/* Defined in auto-generated file mips64-dsp-linux.c. */
|
|
void init_registers_mips64_dsp_linux (void);
|
|
extern const struct target_desc *tdesc_mips64_dsp_linux;
|
|
|
|
#ifdef __mips64
|
|
#define tdesc_mips_linux tdesc_mips64_linux
|
|
#define tdesc_mips_dsp_linux tdesc_mips64_dsp_linux
|
|
#endif
|
|
|
|
#ifndef PTRACE_GET_THREAD_AREA
|
|
#define PTRACE_GET_THREAD_AREA 25
|
|
#endif
|
|
|
|
#ifdef HAVE_SYS_REG_H
|
|
#include <sys/reg.h>
|
|
#endif
|
|
|
|
#define mips_num_regs 73
|
|
#define mips_dsp_num_regs 80
|
|
|
|
#include <asm/ptrace.h>
|
|
|
|
#ifndef DSP_BASE
|
|
#define DSP_BASE 71
|
|
#define DSP_CONTROL 77
|
|
#endif
|
|
|
|
union mips_register
|
|
{
|
|
unsigned char buf[8];
|
|
|
|
/* Deliberately signed, for proper sign extension. */
|
|
int reg32;
|
|
long long reg64;
|
|
};
|
|
|
|
/* Return the ptrace ``address'' of register REGNO. */
|
|
|
|
#define mips_base_regs \
|
|
-1, 1, 2, 3, 4, 5, 6, 7, \
|
|
8, 9, 10, 11, 12, 13, 14, 15, \
|
|
16, 17, 18, 19, 20, 21, 22, 23, \
|
|
24, 25, 26, 27, 28, 29, 30, 31, \
|
|
\
|
|
-1, MMLO, MMHI, BADVADDR, CAUSE, PC, \
|
|
\
|
|
FPR_BASE, FPR_BASE + 1, FPR_BASE + 2, FPR_BASE + 3, \
|
|
FPR_BASE + 4, FPR_BASE + 5, FPR_BASE + 6, FPR_BASE + 7, \
|
|
FPR_BASE + 8, FPR_BASE + 9, FPR_BASE + 10, FPR_BASE + 11, \
|
|
FPR_BASE + 12, FPR_BASE + 13, FPR_BASE + 14, FPR_BASE + 15, \
|
|
FPR_BASE + 16, FPR_BASE + 17, FPR_BASE + 18, FPR_BASE + 19, \
|
|
FPR_BASE + 20, FPR_BASE + 21, FPR_BASE + 22, FPR_BASE + 23, \
|
|
FPR_BASE + 24, FPR_BASE + 25, FPR_BASE + 26, FPR_BASE + 27, \
|
|
FPR_BASE + 28, FPR_BASE + 29, FPR_BASE + 30, FPR_BASE + 31, \
|
|
FPC_CSR, FPC_EIR
|
|
|
|
#define mips_dsp_regs \
|
|
DSP_BASE, DSP_BASE + 1, DSP_BASE + 2, DSP_BASE + 3, \
|
|
DSP_BASE + 4, DSP_BASE + 5, \
|
|
DSP_CONTROL
|
|
|
|
static int mips_regmap[mips_num_regs] = {
|
|
mips_base_regs,
|
|
0
|
|
};
|
|
|
|
static int mips_dsp_regmap[mips_dsp_num_regs] = {
|
|
mips_base_regs,
|
|
mips_dsp_regs,
|
|
0
|
|
};
|
|
|
|
/* DSP registers are not in any regset and can only be accessed
|
|
individually. */
|
|
|
|
static unsigned char mips_dsp_regset_bitmap[(mips_dsp_num_regs + 7) / 8] = {
|
|
0xfe, 0xff, 0xff, 0xff, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x80
|
|
};
|
|
|
|
static int have_dsp = -1;
|
|
|
|
/* Try peeking at an arbitrarily chosen DSP register and pick the available
|
|
user register set accordingly. */
|
|
|
|
static const struct target_desc *
|
|
mips_read_description (void)
|
|
{
|
|
if (have_dsp < 0)
|
|
{
|
|
int pid = lwpid_of (current_inferior);
|
|
|
|
ptrace (PTRACE_PEEKUSER, pid, DSP_CONTROL, 0);
|
|
switch (errno)
|
|
{
|
|
case 0:
|
|
have_dsp = 1;
|
|
break;
|
|
case EIO:
|
|
have_dsp = 0;
|
|
break;
|
|
default:
|
|
perror_with_name ("ptrace");
|
|
break;
|
|
}
|
|
}
|
|
|
|
return have_dsp ? tdesc_mips_dsp_linux : tdesc_mips_linux;
|
|
}
|
|
|
|
static void
|
|
mips_arch_setup (void)
|
|
{
|
|
current_process ()->tdesc = mips_read_description ();
|
|
}
|
|
|
|
static struct usrregs_info *
|
|
get_usrregs_info (void)
|
|
{
|
|
const struct regs_info *regs_info = the_low_target.regs_info ();
|
|
|
|
return regs_info->usrregs;
|
|
}
|
|
|
|
/* Per-process arch-specific data we want to keep. */
|
|
|
|
struct arch_process_info
|
|
{
|
|
/* -1 if the kernel and/or CPU do not support watch registers.
|
|
1 if watch_readback is valid and we can read style, num_valid
|
|
and the masks.
|
|
0 if we need to read the watch_readback. */
|
|
|
|
int watch_readback_valid;
|
|
|
|
/* Cached watch register read values. */
|
|
|
|
struct pt_watch_regs watch_readback;
|
|
|
|
/* Current watchpoint requests for this process. */
|
|
|
|
struct mips_watchpoint *current_watches;
|
|
|
|
/* The current set of watch register values for writing the
|
|
registers. */
|
|
|
|
struct pt_watch_regs watch_mirror;
|
|
};
|
|
|
|
/* Per-thread arch-specific data we want to keep. */
|
|
|
|
struct arch_lwp_info
|
|
{
|
|
/* Non-zero if our copy differs from what's recorded in the thread. */
|
|
int watch_registers_changed;
|
|
};
|
|
|
|
/* From mips-linux-nat.c. */
|
|
|
|
/* Pseudo registers can not be read. ptrace does not provide a way to
|
|
read (or set) PS_REGNUM, and there's no point in reading or setting
|
|
ZERO_REGNUM. We also can not set BADVADDR, CAUSE, or FCRIR via
|
|
ptrace(). */
|
|
|
|
static int
|
|
mips_cannot_fetch_register (int regno)
|
|
{
|
|
const struct target_desc *tdesc;
|
|
|
|
if (get_usrregs_info ()->regmap[regno] == -1)
|
|
return 1;
|
|
|
|
tdesc = current_process ()->tdesc;
|
|
|
|
if (find_regno (tdesc, "r0") == regno)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mips_cannot_store_register (int regno)
|
|
{
|
|
const struct target_desc *tdesc;
|
|
|
|
if (get_usrregs_info ()->regmap[regno] == -1)
|
|
return 1;
|
|
|
|
tdesc = current_process ()->tdesc;
|
|
|
|
if (find_regno (tdesc, "r0") == regno)
|
|
return 1;
|
|
|
|
if (find_regno (tdesc, "cause") == regno)
|
|
return 1;
|
|
|
|
if (find_regno (tdesc, "badvaddr") == regno)
|
|
return 1;
|
|
|
|
if (find_regno (tdesc, "fir") == regno)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static CORE_ADDR
|
|
mips_get_pc (struct regcache *regcache)
|
|
{
|
|
union mips_register pc;
|
|
collect_register_by_name (regcache, "pc", pc.buf);
|
|
return register_size (regcache->tdesc, 0) == 4 ? pc.reg32 : pc.reg64;
|
|
}
|
|
|
|
static void
|
|
mips_set_pc (struct regcache *regcache, CORE_ADDR pc)
|
|
{
|
|
union mips_register newpc;
|
|
if (register_size (regcache->tdesc, 0) == 4)
|
|
newpc.reg32 = pc;
|
|
else
|
|
newpc.reg64 = pc;
|
|
|
|
supply_register_by_name (regcache, "pc", newpc.buf);
|
|
}
|
|
|
|
/* Correct in either endianness. */
|
|
static const unsigned int mips_breakpoint = 0x0005000d;
|
|
#define mips_breakpoint_len 4
|
|
|
|
/* We only place breakpoints in empty marker functions, and thread locking
|
|
is outside of the function. So rather than importing software single-step,
|
|
we can just run until exit. */
|
|
static CORE_ADDR
|
|
mips_reinsert_addr (void)
|
|
{
|
|
struct regcache *regcache = get_thread_regcache (current_inferior, 1);
|
|
union mips_register ra;
|
|
collect_register_by_name (regcache, "r31", ra.buf);
|
|
return register_size (regcache->tdesc, 0) == 4 ? ra.reg32 : ra.reg64;
|
|
}
|
|
|
|
static int
|
|
mips_breakpoint_at (CORE_ADDR where)
|
|
{
|
|
unsigned int insn;
|
|
|
|
(*the_target->read_memory) (where, (unsigned char *) &insn, 4);
|
|
if (insn == mips_breakpoint)
|
|
return 1;
|
|
|
|
/* If necessary, recognize more trap instructions here. GDB only uses the
|
|
one. */
|
|
return 0;
|
|
}
|
|
|
|
/* Mark the watch registers of lwp, represented by ENTRY, as changed,
|
|
if the lwp's process id is *PID_P. */
|
|
|
|
static int
|
|
update_watch_registers_callback (struct inferior_list_entry *entry,
|
|
void *pid_p)
|
|
{
|
|
struct thread_info *thread = (struct thread_info *) entry;
|
|
struct lwp_info *lwp = get_thread_lwp (thread);
|
|
int pid = *(int *) pid_p;
|
|
|
|
/* Only update the threads of this process. */
|
|
if (pid_of (thread) == pid)
|
|
{
|
|
/* The actual update is done later just before resuming the lwp,
|
|
we just mark that the registers need updating. */
|
|
lwp->arch_private->watch_registers_changed = 1;
|
|
|
|
/* If the lwp isn't stopped, force it to momentarily pause, so
|
|
we can update its watch registers. */
|
|
if (!lwp->stopped)
|
|
linux_stop_lwp (lwp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
new_process. */
|
|
|
|
static struct arch_process_info *
|
|
mips_linux_new_process (void)
|
|
{
|
|
struct arch_process_info *info = xcalloc (1, sizeof (*info));
|
|
|
|
return info;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method new_thread.
|
|
Mark the watch registers as changed, so the threads' copies will
|
|
be updated. */
|
|
|
|
static struct arch_lwp_info *
|
|
mips_linux_new_thread (void)
|
|
{
|
|
struct arch_lwp_info *info = xcalloc (1, sizeof (*info));
|
|
|
|
info->watch_registers_changed = 1;
|
|
|
|
return info;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
prepare_to_resume. If the watch regs have changed, update the
|
|
thread's copies. */
|
|
|
|
static void
|
|
mips_linux_prepare_to_resume (struct lwp_info *lwp)
|
|
{
|
|
ptid_t ptid = ptid_of (get_lwp_thread (lwp));
|
|
struct process_info *proc = find_process_pid (ptid_get_pid (ptid));
|
|
struct arch_process_info *private = proc->private->arch_private;
|
|
|
|
if (lwp->arch_private->watch_registers_changed)
|
|
{
|
|
/* Only update the watch registers if we have set or unset a
|
|
watchpoint already. */
|
|
if (mips_linux_watch_get_num_valid (&private->watch_mirror) > 0)
|
|
{
|
|
/* Write the mirrored watch register values. */
|
|
int tid = ptid_get_lwp (ptid);
|
|
|
|
if (-1 == ptrace (PTRACE_SET_WATCH_REGS, tid,
|
|
&private->watch_mirror))
|
|
perror_with_name ("Couldn't write watch register");
|
|
}
|
|
|
|
lwp->arch_private->watch_registers_changed = 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mips_supports_z_point_type (char z_type)
|
|
{
|
|
switch (z_type)
|
|
{
|
|
case Z_PACKET_WRITE_WP:
|
|
case Z_PACKET_READ_WP:
|
|
case Z_PACKET_ACCESS_WP:
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
insert_point. */
|
|
|
|
static int
|
|
mips_insert_point (enum raw_bkpt_type type, CORE_ADDR addr,
|
|
int len, struct raw_breakpoint *bp)
|
|
{
|
|
struct process_info *proc = current_process ();
|
|
struct arch_process_info *private = proc->private->arch_private;
|
|
struct pt_watch_regs regs;
|
|
struct mips_watchpoint *new_watch;
|
|
struct mips_watchpoint **pw;
|
|
int pid;
|
|
long lwpid;
|
|
enum target_hw_bp_type watch_type;
|
|
uint32_t irw;
|
|
|
|
lwpid = lwpid_of (current_inferior);
|
|
if (!mips_linux_read_watch_registers (lwpid,
|
|
&private->watch_readback,
|
|
&private->watch_readback_valid,
|
|
0))
|
|
return -1;
|
|
|
|
if (len <= 0)
|
|
return -1;
|
|
|
|
regs = private->watch_readback;
|
|
/* Add the current watches. */
|
|
mips_linux_watch_populate_regs (private->current_watches, ®s);
|
|
|
|
/* Now try to add the new watch. */
|
|
watch_type = raw_bkpt_type_to_target_hw_bp_type (type);
|
|
irw = mips_linux_watch_type_to_irw (watch_type);
|
|
if (!mips_linux_watch_try_one_watch (®s, addr, len, irw))
|
|
return -1;
|
|
|
|
/* It fit. Stick it on the end of the list. */
|
|
new_watch = xmalloc (sizeof (struct mips_watchpoint));
|
|
new_watch->addr = addr;
|
|
new_watch->len = len;
|
|
new_watch->type = watch_type;
|
|
new_watch->next = NULL;
|
|
|
|
pw = &private->current_watches;
|
|
while (*pw != NULL)
|
|
pw = &(*pw)->next;
|
|
*pw = new_watch;
|
|
|
|
private->watch_mirror = regs;
|
|
|
|
/* Only update the threads of this process. */
|
|
pid = pid_of (proc);
|
|
find_inferior (&all_threads, update_watch_registers_callback, &pid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
remove_point. */
|
|
|
|
static int
|
|
mips_remove_point (enum raw_bkpt_type type, CORE_ADDR addr,
|
|
int len, struct raw_breakpoint *bp)
|
|
{
|
|
struct process_info *proc = current_process ();
|
|
struct arch_process_info *private = proc->private->arch_private;
|
|
|
|
int deleted_one;
|
|
int pid;
|
|
enum target_hw_bp_type watch_type;
|
|
|
|
struct mips_watchpoint **pw;
|
|
struct mips_watchpoint *w;
|
|
|
|
/* Search for a known watch that matches. Then unlink and free it. */
|
|
watch_type = raw_bkpt_type_to_target_hw_bp_type (type);
|
|
deleted_one = 0;
|
|
pw = &private->current_watches;
|
|
while ((w = *pw))
|
|
{
|
|
if (w->addr == addr && w->len == len && w->type == watch_type)
|
|
{
|
|
*pw = w->next;
|
|
free (w);
|
|
deleted_one = 1;
|
|
break;
|
|
}
|
|
pw = &(w->next);
|
|
}
|
|
|
|
if (!deleted_one)
|
|
return -1; /* We don't know about it, fail doing nothing. */
|
|
|
|
/* At this point watch_readback is known to be valid because we
|
|
could not have added the watch without reading it. */
|
|
gdb_assert (private->watch_readback_valid == 1);
|
|
|
|
private->watch_mirror = private->watch_readback;
|
|
mips_linux_watch_populate_regs (private->current_watches,
|
|
&private->watch_mirror);
|
|
|
|
/* Only update the threads of this process. */
|
|
pid = pid_of (proc);
|
|
find_inferior (&all_threads, update_watch_registers_callback, &pid);
|
|
return 0;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
stopped_by_watchpoint. The watchhi R and W bits indicate
|
|
the watch register triggered. */
|
|
|
|
static int
|
|
mips_stopped_by_watchpoint (void)
|
|
{
|
|
struct process_info *proc = current_process ();
|
|
struct arch_process_info *private = proc->private->arch_private;
|
|
int n;
|
|
int num_valid;
|
|
long lwpid = lwpid_of (current_inferior);
|
|
|
|
if (!mips_linux_read_watch_registers (lwpid,
|
|
&private->watch_readback,
|
|
&private->watch_readback_valid,
|
|
1))
|
|
return 0;
|
|
|
|
num_valid = mips_linux_watch_get_num_valid (&private->watch_readback);
|
|
|
|
for (n = 0; n < MAX_DEBUG_REGISTER && n < num_valid; n++)
|
|
if (mips_linux_watch_get_watchhi (&private->watch_readback, n)
|
|
& (R_MASK | W_MASK))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This is the implementation of linux_target_ops method
|
|
stopped_data_address. */
|
|
|
|
static CORE_ADDR
|
|
mips_stopped_data_address (void)
|
|
{
|
|
struct process_info *proc = current_process ();
|
|
struct arch_process_info *private = proc->private->arch_private;
|
|
int n;
|
|
int num_valid;
|
|
long lwpid = lwpid_of (current_inferior);
|
|
|
|
/* On MIPS we don't know the low order 3 bits of the data address.
|
|
GDB does not support remote targets that can't report the
|
|
watchpoint address. So, make our best guess; return the starting
|
|
address of a watchpoint request which overlaps the one that
|
|
triggered. */
|
|
|
|
if (!mips_linux_read_watch_registers (lwpid,
|
|
&private->watch_readback,
|
|
&private->watch_readback_valid,
|
|
0))
|
|
return 0;
|
|
|
|
num_valid = mips_linux_watch_get_num_valid (&private->watch_readback);
|
|
|
|
for (n = 0; n < MAX_DEBUG_REGISTER && n < num_valid; n++)
|
|
if (mips_linux_watch_get_watchhi (&private->watch_readback, n)
|
|
& (R_MASK | W_MASK))
|
|
{
|
|
CORE_ADDR t_low, t_hi;
|
|
int t_irw;
|
|
struct mips_watchpoint *watch;
|
|
|
|
t_low = mips_linux_watch_get_watchlo (&private->watch_readback, n);
|
|
t_irw = t_low & IRW_MASK;
|
|
t_hi = (mips_linux_watch_get_watchhi (&private->watch_readback, n)
|
|
| IRW_MASK);
|
|
t_low &= ~(CORE_ADDR)t_hi;
|
|
|
|
for (watch = private->current_watches;
|
|
watch != NULL;
|
|
watch = watch->next)
|
|
{
|
|
CORE_ADDR addr = watch->addr;
|
|
CORE_ADDR last_byte = addr + watch->len - 1;
|
|
|
|
if ((t_irw & mips_linux_watch_type_to_irw (watch->type)) == 0)
|
|
{
|
|
/* Different type. */
|
|
continue;
|
|
}
|
|
/* Check for overlap of even a single byte. */
|
|
if (last_byte >= t_low && addr <= t_low + t_hi)
|
|
return addr;
|
|
}
|
|
}
|
|
|
|
/* Shouldn't happen. */
|
|
return 0;
|
|
}
|
|
|
|
/* Fetch the thread-local storage pointer for libthread_db. */
|
|
|
|
ps_err_e
|
|
ps_get_thread_area (const struct ps_prochandle *ph,
|
|
lwpid_t lwpid, int idx, void **base)
|
|
{
|
|
if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0)
|
|
return PS_ERR;
|
|
|
|
/* IDX is the bias from the thread pointer to the beginning of the
|
|
thread descriptor. It has to be subtracted due to implementation
|
|
quirks in libthread_db. */
|
|
*base = (void *) ((char *)*base - idx);
|
|
|
|
return PS_OK;
|
|
}
|
|
|
|
#ifdef HAVE_PTRACE_GETREGS
|
|
|
|
static void
|
|
mips_collect_register (struct regcache *regcache,
|
|
int use_64bit, int regno, union mips_register *reg)
|
|
{
|
|
union mips_register tmp_reg;
|
|
|
|
if (use_64bit)
|
|
{
|
|
collect_register (regcache, regno, &tmp_reg.reg64);
|
|
*reg = tmp_reg;
|
|
}
|
|
else
|
|
{
|
|
collect_register (regcache, regno, &tmp_reg.reg32);
|
|
reg->reg64 = tmp_reg.reg32;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mips_supply_register (struct regcache *regcache,
|
|
int use_64bit, int regno, const union mips_register *reg)
|
|
{
|
|
int offset = 0;
|
|
|
|
/* For big-endian 32-bit targets, ignore the high four bytes of each
|
|
eight-byte slot. */
|
|
if (__BYTE_ORDER == __BIG_ENDIAN && !use_64bit)
|
|
offset = 4;
|
|
|
|
supply_register (regcache, regno, reg->buf + offset);
|
|
}
|
|
|
|
static void
|
|
mips_collect_register_32bit (struct regcache *regcache,
|
|
int use_64bit, int regno, unsigned char *buf)
|
|
{
|
|
union mips_register tmp_reg;
|
|
int reg32;
|
|
|
|
mips_collect_register (regcache, use_64bit, regno, &tmp_reg);
|
|
reg32 = tmp_reg.reg64;
|
|
memcpy (buf, ®32, 4);
|
|
}
|
|
|
|
static void
|
|
mips_supply_register_32bit (struct regcache *regcache,
|
|
int use_64bit, int regno, const unsigned char *buf)
|
|
{
|
|
union mips_register tmp_reg;
|
|
int reg32;
|
|
|
|
memcpy (®32, buf, 4);
|
|
tmp_reg.reg64 = reg32;
|
|
mips_supply_register (regcache, use_64bit, regno, &tmp_reg);
|
|
}
|
|
|
|
static void
|
|
mips_fill_gregset (struct regcache *regcache, void *buf)
|
|
{
|
|
union mips_register *regset = buf;
|
|
int i, use_64bit;
|
|
const struct target_desc *tdesc = regcache->tdesc;
|
|
|
|
use_64bit = (register_size (tdesc, 0) == 8);
|
|
|
|
for (i = 1; i < 32; i++)
|
|
mips_collect_register (regcache, use_64bit, i, regset + i);
|
|
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "lo"), regset + 32);
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "hi"), regset + 33);
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "pc"), regset + 34);
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "badvaddr"), regset + 35);
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "status"), regset + 36);
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "cause"), regset + 37);
|
|
|
|
mips_collect_register (regcache, use_64bit,
|
|
find_regno (tdesc, "restart"), regset + 0);
|
|
}
|
|
|
|
static void
|
|
mips_store_gregset (struct regcache *regcache, const void *buf)
|
|
{
|
|
const union mips_register *regset = buf;
|
|
int i, use_64bit;
|
|
|
|
use_64bit = (register_size (regcache->tdesc, 0) == 8);
|
|
|
|
for (i = 0; i < 32; i++)
|
|
mips_supply_register (regcache, use_64bit, i, regset + i);
|
|
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "lo"), regset + 32);
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "hi"), regset + 33);
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "pc"), regset + 34);
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "badvaddr"), regset + 35);
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "status"), regset + 36);
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "cause"), regset + 37);
|
|
|
|
mips_supply_register (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "restart"), regset + 0);
|
|
}
|
|
|
|
static void
|
|
mips_fill_fpregset (struct regcache *regcache, void *buf)
|
|
{
|
|
union mips_register *regset = buf;
|
|
int i, use_64bit, first_fp, big_endian;
|
|
|
|
use_64bit = (register_size (regcache->tdesc, 0) == 8);
|
|
first_fp = find_regno (regcache->tdesc, "f0");
|
|
big_endian = (__BYTE_ORDER == __BIG_ENDIAN);
|
|
|
|
/* See GDB for a discussion of this peculiar layout. */
|
|
for (i = 0; i < 32; i++)
|
|
if (use_64bit)
|
|
collect_register (regcache, first_fp + i, regset[i].buf);
|
|
else
|
|
collect_register (regcache, first_fp + i,
|
|
regset[i & ~1].buf + 4 * (big_endian != (i & 1)));
|
|
|
|
mips_collect_register_32bit (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "fcsr"), regset[32].buf);
|
|
mips_collect_register_32bit (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "fir"),
|
|
regset[32].buf + 4);
|
|
}
|
|
|
|
static void
|
|
mips_store_fpregset (struct regcache *regcache, const void *buf)
|
|
{
|
|
const union mips_register *regset = buf;
|
|
int i, use_64bit, first_fp, big_endian;
|
|
|
|
use_64bit = (register_size (regcache->tdesc, 0) == 8);
|
|
first_fp = find_regno (regcache->tdesc, "f0");
|
|
big_endian = (__BYTE_ORDER == __BIG_ENDIAN);
|
|
|
|
/* See GDB for a discussion of this peculiar layout. */
|
|
for (i = 0; i < 32; i++)
|
|
if (use_64bit)
|
|
supply_register (regcache, first_fp + i, regset[i].buf);
|
|
else
|
|
supply_register (regcache, first_fp + i,
|
|
regset[i & ~1].buf + 4 * (big_endian != (i & 1)));
|
|
|
|
mips_supply_register_32bit (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "fcsr"),
|
|
regset[32].buf);
|
|
mips_supply_register_32bit (regcache, use_64bit,
|
|
find_regno (regcache->tdesc, "fir"),
|
|
regset[32].buf + 4);
|
|
}
|
|
#endif /* HAVE_PTRACE_GETREGS */
|
|
|
|
static struct regset_info mips_regsets[] = {
|
|
#ifdef HAVE_PTRACE_GETREGS
|
|
{ PTRACE_GETREGS, PTRACE_SETREGS, 0, 38 * 8, GENERAL_REGS,
|
|
mips_fill_gregset, mips_store_gregset },
|
|
{ PTRACE_GETFPREGS, PTRACE_SETFPREGS, 0, 33 * 8, FP_REGS,
|
|
mips_fill_fpregset, mips_store_fpregset },
|
|
#endif /* HAVE_PTRACE_GETREGS */
|
|
{ 0, 0, 0, -1, -1, NULL, NULL }
|
|
};
|
|
|
|
static struct regsets_info mips_regsets_info =
|
|
{
|
|
mips_regsets, /* regsets */
|
|
0, /* num_regsets */
|
|
NULL, /* disabled_regsets */
|
|
};
|
|
|
|
static struct usrregs_info mips_dsp_usrregs_info =
|
|
{
|
|
mips_dsp_num_regs,
|
|
mips_dsp_regmap,
|
|
};
|
|
|
|
static struct usrregs_info mips_usrregs_info =
|
|
{
|
|
mips_num_regs,
|
|
mips_regmap,
|
|
};
|
|
|
|
static struct regs_info dsp_regs_info =
|
|
{
|
|
mips_dsp_regset_bitmap,
|
|
&mips_dsp_usrregs_info,
|
|
&mips_regsets_info
|
|
};
|
|
|
|
static struct regs_info regs_info =
|
|
{
|
|
NULL, /* regset_bitmap */
|
|
&mips_usrregs_info,
|
|
&mips_regsets_info
|
|
};
|
|
|
|
static const struct regs_info *
|
|
mips_regs_info (void)
|
|
{
|
|
if (have_dsp)
|
|
return &dsp_regs_info;
|
|
else
|
|
return ®s_info;
|
|
}
|
|
|
|
struct linux_target_ops the_low_target = {
|
|
mips_arch_setup,
|
|
mips_regs_info,
|
|
mips_cannot_fetch_register,
|
|
mips_cannot_store_register,
|
|
NULL, /* fetch_register */
|
|
mips_get_pc,
|
|
mips_set_pc,
|
|
(const unsigned char *) &mips_breakpoint,
|
|
mips_breakpoint_len,
|
|
mips_reinsert_addr,
|
|
0,
|
|
mips_breakpoint_at,
|
|
mips_supports_z_point_type,
|
|
mips_insert_point,
|
|
mips_remove_point,
|
|
mips_stopped_by_watchpoint,
|
|
mips_stopped_data_address,
|
|
NULL,
|
|
NULL,
|
|
NULL, /* siginfo_fixup */
|
|
mips_linux_new_process,
|
|
mips_linux_new_thread,
|
|
mips_linux_prepare_to_resume
|
|
};
|
|
|
|
void
|
|
initialize_low_arch (void)
|
|
{
|
|
/* Initialize the Linux target descriptions. */
|
|
init_registers_mips_linux ();
|
|
init_registers_mips_dsp_linux ();
|
|
init_registers_mips64_linux ();
|
|
init_registers_mips64_dsp_linux ();
|
|
|
|
initialize_regsets_info (&mips_regsets_info);
|
|
}
|